URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.20.1/] [bfd/] [format.c] - Rev 233
Go to most recent revision | Compare with Previous | Blame | View Log
/* Generic BFD support for file formats. Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1999, 2000, 2001, 2002, 2003, 2005, 2007, 2008, 2009 Free Software Foundation, Inc. Written by Cygnus Support. This file is part of BFD, the Binary File Descriptor library. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ /* SECTION File formats A format is a BFD concept of high level file contents type. The formats supported by BFD are: o <<bfd_object>> The BFD may contain data, symbols, relocations and debug info. o <<bfd_archive>> The BFD contains other BFDs and an optional index. o <<bfd_core>> The BFD contains the result of an executable core dump. SUBSECTION File format functions */ #include "sysdep.h" #include "bfd.h" #include "libbfd.h" /* IMPORT from targets.c. */ extern const size_t _bfd_target_vector_entries; /* FUNCTION bfd_check_format SYNOPSIS bfd_boolean bfd_check_format (bfd *abfd, bfd_format format); DESCRIPTION Verify if the file attached to the BFD @var{abfd} is compatible with the format @var{format} (i.e., one of <<bfd_object>>, <<bfd_archive>> or <<bfd_core>>). If the BFD has been set to a specific target before the call, only the named target and format combination is checked. If the target has not been set, or has been set to <<default>>, then all the known target backends is interrogated to determine a match. If the default target matches, it is used. If not, exactly one target must recognize the file, or an error results. The function returns <<TRUE>> on success, otherwise <<FALSE>> with one of the following error codes: o <<bfd_error_invalid_operation>> - if <<format>> is not one of <<bfd_object>>, <<bfd_archive>> or <<bfd_core>>. o <<bfd_error_system_call>> - if an error occured during a read - even some file mismatches can cause bfd_error_system_calls. o <<file_not_recognised>> - none of the backends recognised the file format. o <<bfd_error_file_ambiguously_recognized>> - more than one backend recognised the file format. */ bfd_boolean bfd_check_format (bfd *abfd, bfd_format format) { return bfd_check_format_matches (abfd, format, NULL); } /* FUNCTION bfd_check_format_matches SYNOPSIS bfd_boolean bfd_check_format_matches (bfd *abfd, bfd_format format, char ***matching); DESCRIPTION Like <<bfd_check_format>>, except when it returns FALSE with <<bfd_errno>> set to <<bfd_error_file_ambiguously_recognized>>. In that case, if @var{matching} is not NULL, it will be filled in with a NULL-terminated list of the names of the formats that matched, allocated with <<malloc>>. Then the user may choose a format and try again. When done with the list that @var{matching} points to, the caller should free it. */ bfd_boolean bfd_check_format_matches (bfd *abfd, bfd_format format, char ***matching) { extern const bfd_target binary_vec; const bfd_target * const *target; const bfd_target **matching_vector = NULL; const bfd_target *save_targ, *right_targ, *ar_right_targ; int match_count; int ar_match_index; if (matching != NULL) *matching = NULL; if (!bfd_read_p (abfd) || (unsigned int) abfd->format >= (unsigned int) bfd_type_end) { bfd_set_error (bfd_error_invalid_operation); return FALSE; } if (abfd->format != bfd_unknown) return abfd->format == format; /* Since the target type was defaulted, check them all in the hope that one will be uniquely recognized. */ save_targ = abfd->xvec; match_count = 0; ar_match_index = _bfd_target_vector_entries; if (matching != NULL || *bfd_associated_vector != NULL) { bfd_size_type amt; amt = sizeof (*matching_vector) * 2 * _bfd_target_vector_entries; matching_vector = (const bfd_target **) bfd_malloc (amt); if (!matching_vector) return FALSE; } right_targ = 0; ar_right_targ = 0; /* Presume the answer is yes. */ abfd->format = format; /* If the target type was explicitly specified, just check that target. */ if (!abfd->target_defaulted) { if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0) /* rewind! */ goto err_ret; right_targ = BFD_SEND_FMT (abfd, _bfd_check_format, (abfd)); if (right_targ) goto ok_ret; /* For a long time the code has dropped through to check all targets if the specified target was wrong. I don't know why, and I'm reluctant to change it. However, in the case of an archive, it can cause problems. If the specified target does not permit archives (e.g., the binary target), then we should not allow some other target to recognize it as an archive, but should instead allow the specified target to recognize it as an object. When I first made this change, it broke the PE target, because the specified pei-i386 target did not recognize the actual pe-i386 archive. Since there may be other problems of this sort, I changed this test to check only for the binary target. */ if (format == bfd_archive && save_targ == &binary_vec) goto err_unrecog; } for (target = bfd_target_vector; *target != NULL; target++) { const bfd_target *temp; bfd_error_type err; /* Don't check the default target twice. */ if (*target == &binary_vec || (!abfd->target_defaulted && *target == save_targ)) continue; abfd->xvec = *target; /* Change BFD's target temporarily. */ if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0) goto err_ret; /* If _bfd_check_format neglects to set bfd_error, assume bfd_error_wrong_format. We didn't used to even pay any attention to bfd_error, so I suspect that some _bfd_check_format might have this problem. */ bfd_set_error (bfd_error_wrong_format); temp = BFD_SEND_FMT (abfd, _bfd_check_format, (abfd)); if (temp && (abfd->format != bfd_archive || bfd_has_map (abfd))) { /* This format checks out as ok! */ right_targ = temp; /* If this is the default target, accept it, even if other targets might match. People who want those other targets have to set the GNUTARGET variable. */ if (temp == bfd_default_vector[0]) { match_count = 1; break; } if (matching_vector) matching_vector[match_count] = temp; match_count++; } else if (temp || (err = bfd_get_error ()) == bfd_error_wrong_object_format || err == bfd_error_file_ambiguously_recognized) { /* An archive with no armap or objects of the wrong type, or an ambiguous match. We want this target to match if we get no better matches. */ if (ar_right_targ != bfd_default_vector[0]) ar_right_targ = *target; if (matching_vector) matching_vector[ar_match_index] = *target; ar_match_index++; } else if (err != bfd_error_wrong_format) goto err_ret; } if (match_count == 0) { /* Try partial matches. */ right_targ = ar_right_targ; if (right_targ == bfd_default_vector[0]) { match_count = 1; } else { match_count = ar_match_index - _bfd_target_vector_entries; if (matching_vector && match_count > 1) memcpy (matching_vector, matching_vector + _bfd_target_vector_entries, sizeof (*matching_vector) * match_count); } } if (match_count > 1) { const bfd_target * const *assoc = bfd_associated_vector; while ((right_targ = *assoc++) != NULL) { int i = match_count; while (--i >= 0) if (matching_vector[i] == right_targ) break; if (i >= 0) { match_count = 1; break; } } } if (match_count == 1) { ok_ret: abfd->xvec = right_targ; /* Change BFD's target permanently. */ /* If the file was opened for update, then `output_has_begun' some time ago when the file was created. Do not recompute sections sizes or alignments in _bfd_set_section_contents. We can not set this flag until after checking the format, because it will interfere with creation of BFD sections. */ if (abfd->direction == both_direction) abfd->output_has_begun = TRUE; if (matching_vector) free (matching_vector); return TRUE; /* File position has moved, BTW. */ } if (match_count == 0) { err_unrecog: bfd_set_error (bfd_error_file_not_recognized); err_ret: abfd->xvec = save_targ; abfd->format = bfd_unknown; if (matching_vector) free (matching_vector); return FALSE; } abfd->xvec = save_targ; /* Restore original target type. */ abfd->format = bfd_unknown; /* Restore original format. */ bfd_set_error (bfd_error_file_ambiguously_recognized); if (matching) { *matching = (char **) matching_vector; matching_vector[match_count] = NULL; /* Return target names. This is a little nasty. Maybe we should do another bfd_malloc? */ while (--match_count >= 0) { const char *name = matching_vector[match_count]->name; *(const char **) &matching_vector[match_count] = name; } } return FALSE; } /* FUNCTION bfd_set_format SYNOPSIS bfd_boolean bfd_set_format (bfd *abfd, bfd_format format); DESCRIPTION This function sets the file format of the BFD @var{abfd} to the format @var{format}. If the target set in the BFD does not support the format requested, the format is invalid, or the BFD is not open for writing, then an error occurs. */ bfd_boolean bfd_set_format (bfd *abfd, bfd_format format) { if (bfd_read_p (abfd) || (unsigned int) abfd->format >= (unsigned int) bfd_type_end) { bfd_set_error (bfd_error_invalid_operation); return FALSE; } if (abfd->format != bfd_unknown) return abfd->format == format; /* Presume the answer is yes. */ abfd->format = format; if (!BFD_SEND_FMT (abfd, _bfd_set_format, (abfd))) { abfd->format = bfd_unknown; return FALSE; } return TRUE; } /* FUNCTION bfd_format_string SYNOPSIS const char *bfd_format_string (bfd_format format); DESCRIPTION Return a pointer to a const string <<invalid>>, <<object>>, <<archive>>, <<core>>, or <<unknown>>, depending upon the value of @var{format}. */ const char * bfd_format_string (bfd_format format) { if (((int) format < (int) bfd_unknown) || ((int) format >= (int) bfd_type_end)) return "invalid"; switch (format) { case bfd_object: return "object"; /* Linker/assembler/compiler output. */ case bfd_archive: return "archive"; /* Object archive file. */ case bfd_core: return "core"; /* Core dump. */ default: return "unknown"; } }
Go to most recent revision | Compare with Previous | Blame | View Log