Subversion Repositories openrisc_me

2010-02-05  Christophe Lyon  <christophe.lyon@st.com>

        * objdump.c (disassemble_bytes): Clear aux->reloc before printing
        a new address, so as not to reuse a previous, non-related reloc.

2010-01-05  Alan Modra  <amodra@gmail.com>

        PR 11129
        2009-11-20  Ben Elliston  <bje@au.ibm.com>
        * Makefile.am (syslex.o): Use $(NO_WERROR) not -Wno-error.
        (sysinfo.o): Likewise.
        PR 10764
        2009-10-16  Jerker Bäck <jerker.back@gmail.com>
        * Makefile.am (sysinfo.o, syslex.o): Place source file after all
        command line switches.
        * Makefile.in: Regenerate.

2009-12-31  Eirik Byrkjeflot Anonsen  <eirik@opera.com>
            Nick Clifton  <nickc@redhat.com>

        * objcopy.c (add_redefine_syms_file): Avoid symbol buffer
        overrun.

2009-10-23  Thomas Cougnard  <thomas.cougnard@gmail.com>

        * readelf.c (dynamic_info): Correct size of array.

2009-10-19  Jerker Bäck  <jerker.back@gmail.com>

        PR binutils/10793
        * prdbg.c (tg_end_struct_type): Warning fix.

        PR binutils/10792
        * dlltool.c (dll_name_list_append): Declare variable at start
        of block.
        (dll_name_list_count, dll_name-list_print): Likewise.

2009-10-01  Alan Modra  <amodra@bigpond.net.au>

        * addr2line.c (slurp_symtab): Don't use bfd_read_minisymbols.

2009-09-29  Nick Clifton  <nickc@redhat.com>

        * doc/binutils.texi (c++filt): Remove spurious description of
        nonexistent --java command line switch for cxxfilt.

2009-09-22  Richard Sandiford  <rdsandiford@googlemail.com>

        * objdump.c (disassemble_section): Use bfd_get_arch_size
        instead of assuming that the address size is 32 bits.

2009-09-21  Alan Modra  <amodra@bigpond.net.au>

        * readelf.c (get_ppc_dynamic_type): Add TLSOPT.
        (get_ppc64_dynamic_type): Likewise.

2009-09-18  Nick Clifton  <nickc@redhat.com>

        * po/es.po: Updated Spanish translation.
        * po/vi.po: Updated Vietnamese translation.

2009-09-11  Nick Clifton  <nickc@redhat.com>

        * po/binutils.pot: Updated by the Translation project.

2009-09-10  Martin Thuresson  <martin@mtme.org>

        Update sources to compile cleanly with -Wc++-compat:
        * addr2line.c (slurp_symtab): Fix casts. Introduce variable
        minisyms to avoid aliasing varning.
        * ar.c: Add casts.
        (normalize): Use name del instead of delete.
        (display_target_list,display_info_table): Change loop counter
        variable a to int.
        * bucomm.c: Add casts.
        * debug.c: Update function to use new names.
        (struct debug_baseclass): Rename member from virtual to
        is_virtual.
        (struct debug_type_s, struct debug_field_s, struct
        debug_baseclass_s, struct debug_method_s, struct
        debug_method_variant_s, struct debug_type_s): Rename struct from
        avoid name collision.
        * debug.h: Use new struct names.
        * dwarf.c: Add casts.
        (free_debug_memory): Change loop counter variable a to int.
        * ieee.c: Add casts.
        (enum ieee_var_kind): Move to top level.
        (ieee_class_baseclass): Rename parameter virtual to is_virtual.
        (ieee_class_method_var): Rename variable virtual to is_virtual.
        * nm.c: Add casts.
        * objcopy.c: Add casts.
        (copy_archive): Rename variable delete to del.
        * objdump.c: Add casts.
        (dump_dwarf_section): Change loop counter variable i to int.
        * prdbg.c: Add casts.
        (pr_class_baseclass,tg_class_baseclass): Rename parameters virtual
        to is_virtual.
        * readelf.c: Add casts.
        (struct ia64_unw_table_entry,struct hppa_unw_table_entry): Move to
        top level.
        * size.c: Add casts.
        * stabs.c (parse_stab_type, parse_stab_range_type,
        (parse_stab_cpp_abbrev): Rename parameter from typename to
        type_name.
        (parse_stab_baseclasses): Rename variable virtual to is_virtual.
        * strings.c: Add casts.
        * wrstabs.c (stab_class_baseclass): Rename parameter virtual to
        is_virtual.

2009-09-09  Nick Clifton  <nickc@redhat.com>

        PR 10478:
        readelf.c (get_elf_section_flags): Add support for SHF_EXCLUDE and
        SHF_ORDERED.
        (process_section_headers): Warn about out of range sh_link
        values.  When displaying detailed section header information
        annote the SHN_BEFORE and SHN_AFTER values.

2009-09-08  Alan Modra  <amodra@bigpond.net.au>

        * dwarf.c (byte_get_little_endian): Handle size of 3.
        (byte_get_big_endian): Likewise.
        * readelf.c (byte_put_little_endian): Likewise.
        (byte_put_big_endian): Likewise.
        (is_24bit_abs_reloc): New function.
        (is_none_reloc): Formatting.
        (apply_relocations): Use is_24bit_abs_reloc.  Handle pj and xtensa
        reloc peculiarity.

2009-09-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * readelf.c (is_none_reloc <EM_XTENSA_OLD>, is_none_reloc <EM_XTENSA>):
        New.

2009-09-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * dwarf.c (process_debug_info): Support section padding abbrev codes.

2009-09-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * Makefile.am (sysdump.o): Depend on sysroff.c.
        * Makefile.in: Regenerate.

2009-09-07  Tristan Gingold  <gingold@adacore.com>

        * po/binutils.pot: Regenerate.

2009-09-05  Martin Thuresson  <martin@mtme.org>

        * ieee.c (ieee_read_cxx_misc, ieee_read_cxx_class,
        ieee_read_reference): Rename variables named class to cxxclass.

2009-09-04  Tristan Gingold  <gingold@adacore.com>

        * NEWS: Add marker for 2.20.

2009-09-04  Timo Kreuzer  <timo.kreuzer@web.de>

        * dlltool.c (delayimp_name): Add new global variable
        (usage, long_options, main): Add new option "-y" / "--output-delaylib"
        (struct mac): Add fields how_dljtab_size, how_dljtab_roff1,
        how_dljtab_roff2, how_dljtab, trampoline.
        (i386_dljtab): Add binary stub for x86 delay import.
        (i386_trampoline): Add text assembly stub for x86 delay import.
        (mtable): Add delay import data for M386 and MX86 only.
        (make_delay_head): New function.
        (make_one_lib_file): New arg delay creates delay-load import stub.
        (gen_lib_file): New arg delay likewise.
        (HOW_JTAB, HOW_JTAB_SIZE, HOW_JTAB_ROFF): New arg delay likewise.
        (HOW_JTAB_ROFF2, HOW_JTAB_ROFF3): New macros for delay import.
        (make_tail): Convert hard TABS embedded in strings to "\t" escapes.
        * NEWS: Mention new feature.  Also fix whitespace.
        * doc/binutils.texi: Updated dlltool documentation.

2009-09-02  Tristan Gingold  <gingold@adacore.com>

        * configure.com: Do not copy makefile.vms-in to makefile.vms
        * makefile.vms-in: Renamed to...
        * makefile.vms: ... this usual name as it is not processed anymore.
        Remove WRITE_DEBUG_OBJS (unused) and reorder object files for
        objdump.exe.

2009-09-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * Makefile.am (arparse.o, arlex.o, sysroff.o, defparse.o)
        (deflex.o, nlmheaders.o, rcparse.o, mcparse.o): Supply correct
        source file name for generated files which may be in $(srcdir).
        * Makefile.in: Regenerate.

2009-09-01  H.J. Lu  <hongjiu.lu@intel.com>

        * version.c (print_version): Change to "Copyright 2009".

2009-09-01  Tristan Gingold  <gingold@adacore.com>

        * makefile.vms-in: Remove unused VERSION variable.  Remove unused
        dependencies.
        * configure.com: Ported to Itanium VMS.  Create build.com DCL script.

2009-08-29  Martin Thuresson  <martin@mtme.org>

        * nlmconv.c (main): Rename variable new to new_name.

2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.am (sysinfo$(EXEEXT_FOR_BUILD)): Replace
        CFLAGS/LDFLAGS with CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
        (syslex.o): Likewise.
        (sysinfo.o): Likewise.
        (bin2c$(EXEEXT_FOR_BUILD)): Likewise.
        * Makefile.in: Regenerated.

2009-08-27  Dave Korn  <dave.korn.cygwin@gmail.com>

        * doc/binutils.texi (--only-keep-debug): Relocate stray para here ...
        (--subsystem): ... from here.

2009-08-24  Cary Coutant  <ccoutant@google.com>

        * objdump.c (find_symbol_for_address): Avoid costly call to
        bfd_octets_per_byte.

2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * Makefile.am (am__skiplex, am__skipyacc): New.
        * Makefile.in: Regenerate.

2009-08-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * Makefile.am (syslex.o): Depend on sysinfo.h config.h.
        * Makefile.in: Regenerate.

2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * Makefile.am (AM_CPPFLAGS): Renamed from ...
        (INCLUDES): ... this.
        (bin2c$(EXEEXT_FOR_BUILD): Adjust rule.
        (installcheck-local): Renamed from ...
        (installcheck): ... this.
        * Makefile.in: Regenerate.

        * Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add no-dist and
        foreign.
        (MKDEP, CLEANFILES): Remove now-unneeded variables.
        (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove.
        (mkdep section): Remove.
        (BUILT_SOURCES): New variable, list $(GENERATED_HFILES).
        (EXTRA_ar_SOURCES): New, list $(CFILES).
        (syslex.o): Depend on syslex.c.
        (sysinfo.o): Depend on sysinfo.c.
        (arparse.h, defparse.h, nlmheaders.h rcparse.h mcparse.h):
        Remove dependencies, now tracked by automake.
        (srconv.o): Depend on sysroff.c.
        (objdump.o, arparse.o, arlex.o, sysroff.o, defparse.o, deflex.o)
        (nlmheader.o, rcparse.o, mcparse.o, rclex.o, mclex.o, dlltool.o)
        (rescoff.o, nlmconv.o): Rewrite using automake-style dependency
        tracking rules; only list the dependency upon the primary source
        file, but no included headers.
        * Makefile.in: Regenerate.

        * Makefile.am (install-pdf, install-pdf-recursive, install-html)
        (install-html-recursive): Remove.
        * Makefile.in: Regenerate.
        * doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
        (html__strip_dir, install-html, install-html-am): Remove.
        * doc/Makefile.in: Regenerate.

        * Makefile.in: Regenerate.
        * aclocal.m4: Likewise.
        * config.in: Likewise.
        * configure: Likewise.
        * doc/Makefile.in: Likewise.

2009-08-17  Nick Clifton  <nickc@redhat.com>

        * readelf.c (is_32bit_abs_reloc): Treat R_PARISC_SECREL32 as a
        32-bit absolute reloc for the purposes of processing debug
        sections.

2009-08-10  Daniel Gutson  <dgutson@codesourcery.com>

        * readelf.c (get_arm_section_type_name): Added support for
        new sections headers.

2009-08-03  H.J. Lu  <hongjiu.lu@intel.com>

        PR binutils/10364
        * objcopy.c (strip_main): Check return from smart_rename.
        (copy_main): Likewise.

2009-07-27  Nick Clifton  <nickc@redhat.com>

        PR 10413
        * objdump.c (dump_section_header): Skip sections that we are
        ignoring.

2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (guess_is_rela): Handle EM_L1OM.
        (dump_relocations): Likewise.
        (get_machine_name): Likewise.
        (get_section_type_name): Likewise.
        (get_elf_section_flags): Likewise.
        (get_symbol_index_type): Likewise.
        (is_32bit_abs_reloc): Likewise.
        (is_32bit_pcrel_reloc): Likewise.
        (is_64bit_abs_reloc): Likewise.
        (is_64bit_pcrel_reloc): Likewise.
        (is_none_reloc): Likewise.

2009-07-23  Ulrich Drepper  <drepper@redhat.com>

        * readelf.c (get_symbol_binding): For Linux targeted files return
        UNIQUE for symbols with the STB_GNU_UNIQUE binding.
        * doc/binutils.texi: Document the meaning of the 'u' symbol
        binding in the output of nm and objdump --syms.

2009-07-20  H.J. Lu  <hongjiu.lu@intel.com>

        * NEWS: Mention --insn-width.

        * objdump.c (insn_width): New.
        (usage): Display --insn-width.
        (option_values): Add OPTION_INSN_WIDTH.
        (long_options): Add --insn-width.
        (disassemble_bytes): Handle insn_width.
        (main): Handle OPTION_INSN_WIDTH.

        * doc/binutils.texi: Document --insn-width.

2009-07-17  Nick Clifton  <nickc@redhat.com>

        * dwarf.c (display_debug_lines): If do_debug_lines has not been
        set then default to displaying raw .debug_line section contents.

2009-07-14  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Support unordered .debug_info references to .debug_ranges.
        * dwarf.c (struct range_entry, range_entry_compar): New.
        (display_debug_ranges): Remove variables last_offset, first, j,
        seen_first_offset, use_debug_info and next.  New variables
        range_entries and range_entry_fill.  Create the sorted copy
        range_entries.  Remove the FIXME error on detected unordered references.
        * dwarf.h (debug_info <range_lists>): New comment.

2009-07-14  Nick Clifton  <nickc@redhat.com>

        PR 10380
        * README: Document use of LDFLAGS="--static".

2009-07-10  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerated.

2009-07-10  Tom Tromey  <tromey@redhat.com>

        * Makefile.am (dwarf.o): Refer to dwarf2.h, not elf/dwarf2.h.
        * Makefile.in: Rebuild.
        * dwarf.c: Include dwarf2.h, not elf/dwarf2.h.

2009-07-06  Tristan Gingold  <gingold@adacore.com>

        * objdump.c (dump_dwarf_section): Handle .eh_frame like other dwarf
        sections.
        * dwarf.h (struct dwarf_section_display): Remove eh_frame field.
        * dwarf.c (debug_displays): Adjust for removed field.

2009-07-03  Jakub Jelinek  <jakub@redhat.com>

        * dwarf.c (decode_location_expression): Handle DW_OP_stack_value
        and DW_OP_implicit_value.

2009-07-01  Nick Clifton  <nickc@redhat.com>

        PR 6714
        * rclex.c (handle_quotes): Do not complain about whitespace
        separating quoted strings.
        (rclex_string): Ignore whitespace when looking for a new opening
        quote following a closing quote.

2009-06-27  H.J. Lu  <hongjiu.lu@intel.com>

        PR binutils/10321
        * bucomm.c (get_file_size): Return -1 on error.

        * objcopy.c (copy_file): Report empty file.

2009-06-23  Nick Clifton  <nickc@redhat.com>

        * dwarf.c (display_debug_lines_raw): Include the name of the
        section in warning message.
        (struct debug_display): Enable reloc processing for .debug_line
        and .debug_ranges sections.

        * readelf.c: Add --relocated-dump command line option to dump the
        relocated contents of a specified section.
        (request_dump): New function.
        (parse_args): Use it.
        (dump_section_as_bytes): Add parameter to indicate whether the
        contents should be relocated.
        (target_specific_reloc_handling): Add code for a R_MN10300_16
        reloc found after a R_MN10300_SYM_DIFF reloc.
        (debug_apply_relocations): Rename to apply_relocations.
        (get_section_contents): New function.  Replaces common code found
        in dump_section_as_strings and dump_section_as_bytes.
        * doc/binutils.texi: Document new command line option.
        * NEWS: Mention the new feature.

2009-06-22  Nick Clifton  <nickc@redhat.com>

        * readelf.c (target_specific_reloc_handling): New function:
        Processes relocs in a target specific manner.
        (debug_apply_relocations): Use the new function.
        * dwarf.c (display_debug_loc): End the dump with a blank line.
        (struct debug_display): Enable reloc processing for .debug_aranges
        and .debug_loc sections.

2009-06-19  Nick Clifton  <nickc@redhat.com>

        * ar.c (usage): Do not use #ifdef inside _("...).
        * nm.c (usage): Likewise.

2009-06-18  Nick Clifton  <nickc@redhat.com>

        PR 10288
        * objdump.c (disassemble_bytes): Set the
        USER_SPECIFIED_MACHINE_TYPE flag in the disassemble_info structure
        if the user has invoked the -m switch.
        * doc/binutils.texi: Document the additional behaviour of
        objdump's -m switch for ARM targets.

2009-06-18  Dave Korn  <dave.korn.cygwin@gmail.com>

        * configure.in: Merge cegcc and mingw32ce target name changes from
        CeGCC project.

2007-12-25  Pedro Alves  <pedro_alves@portugalmail.pt>

        * configure.in: Add arm*-*-cegcc* and arm*-*-mingw32ce* targets.
        * configure: Regenerate.

2009-06-15  Nick Clifton  <nickc@redhat.com>

        PR 10263
        * objdump.c (disassemble_bytes): Set the DISASSEMBLE_DATA bit in
        the flags field of the disassemble_info structure if the -D switch
        is in operation.

2009-06-12  Homer Xing  <homer.xing@yahoo.com>

        * NEWS: Mention new feature added to gprof.

2009-06-12  John Reiser  <jreiser@BitWagon.com>

        * readelf.c (process_symbol_table): Set gnubuckets to NULL after
        freeing it and before returning.

2009-06-12  Jakub Jelinek  <jakub@redhat.com>

        * readelf.c (process_symbol_table): Don't return early if
        .hash/.gnu.hash is empty/unusable and not -D.

2009-06-09  Tom Bramer  <tjb@postpro.net>

        PR 10165
        * winduni.c (wind_MultiByteToWideChar): Do not pass MB_PRECOMPOSED
        to MultiByteToWideChar when using the CP_UTF8 or CO_UTF7 types.

2009-06-04  Alan Modra  <amodra@bigpond.net.au>

        * strings.c (main): Delay parsing of decimal digits.

2009-06-04  Alan Modra  <amodra@bigpond.net.au>

        * dep-in.sed: Don't use \n in replacement part of s command.
        * Makefile.am (DEP1): LC_ALL for uniq.
        Run "make dep-am".
        * Makefile.in: Regenerate.

2009-06-03  Tristan Gingold  <gingold@adacore.com>

        * MAINTAINERS: Add myself as Mach-O maintainer.

2009-06-01  Alan Modra  <amodra@bigpond.net.au>

        PR 10199
        * doc/binutils.texi (nm): Correct -S description.

2009-05-28  Nick Clifton  <nickc@redhat.com>

        * po/da.po: Updated Danish translation.

2009-05-28  Nick Clifton  <nickc@redhat.com>

        * readelf.c (display_debug_section): Do not display debug sections
        with the NOBITS section type.

2009-05-27  Rafael Avila de Espindola  <espindola@google.com>

        * aclocal.m4: Include ../config/plugins.m4.
        * configure.in: Use AC_PLUGINS.
        * configure: Regenerate.
        * Makefile.in: Regenerate.
        * doc/Makefile.in: Regenerate.

2009-05-27  Rafael Avila de Espindola  <espindola@google.com>

        * ar.c (main): Call bfd_plugin_set_program_name.
        * nm.c (main): Call bfd_plugin_set_program_name.

2009-05-27  Nathan Sidwell  <nathan@codesourcery.com>

        * sysdump.c (tab): Use puts rather than two printfs.

2009-05-26  Nick Clifton  <nickc@redhat.com>

        * po/id.po: Updated Indonesian translation.
        * po/binutils.pot: Updated template file.

2009-05-26  Rafael Avila de Espindola  <espindola@google.com>

        * ar.c: Include plugin.h.
        (main): Handle the --plugin option.
        * nm.c: Include plugin.h.
        (OPTION_PLUGIN): New.
        (long_options): Add plugin.
        (main): Handle OPTION_PLUGIN.
        * NEWS: Mention  the new feature.
        * doc/binutils: Documement the new command line options.
        * configure.in: Check for --enable-plugins.
        * configure: Regenerate.

2009-05-26  Alan Modra  <amodra@bigpond.net.au>

        * dep-in.sed: Output one filename per line with all lines having
        continuation backslash.  Prefix first line with "A", following
        lines with "B".
        * Makefile.am (DEP): Don't use dep.sed here.
        (DEP1): Run $MKDEP on single files, use dep.sed here on dependencies,
        sort and uniq.
        * Makefile.in: Regenerate.

2009-05-25  Tristan Gingold  <gingold@adacore.com>

        * makefile.vms-in: Fix CFLAGS, add addr2line.exe target.

        * configure.com: Fix it: handle alloca and define TARGET in config.h.

2009-05-22  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.

2009-05-12  Alan Modra  <amodra@bigpond.net.au>

        * objcopy.c (set_long_section_mode): Check input_bfd is coff
        before accessing coff specific fields of bfd.

2009-05-09  Dave Korn  <dave.korn.cygwin@gmail.com>

        * MAINTAINERS:  Add myself as PE/COFF co-maintainer.

2009-05-08  Kai Tietz  <kai.tietz@onevision.com>

        * winduni.c (iconv_onechar): Only define when HAVE_ICONV
        is defined, but not when __CYGWIN__ or _WIN32 are defined.
        See wind_iconv_cp for call logic of this local funtion.

2009-05-05  Guillaume Duhamel  <guillaume.duhamel@gmail.com>

        PR 10109
        * winduni.c: Replace test of HAVE_ICONV_H with a test of
        HAVE_ICONV.
        (iconv_onechar): Use ICONV_CONST instead of "const".
        (wind_MultiByteToWideChar): Initialise local strings.

2009-04-30  Nick Clifton  <nickc@redhat.com>

        * readelf.c (dump_relocations): Display a relocation against an
        ifunc symbol as if it were a function invocation.
        (get_symbol_type): Handle STT_GNU_IFUNC.

2009-04-29  Anthony Green  <green@moxielogic.com>

        * NEWS: Tweak verilog support description.

2009-04-29  Alan Modra  <amodra@bigpond.net.au>
            Denis Scherbakov <denis_scherbakov@yahoo.com>

        * readelf.c (slurp_ia64_unwind_table): Correct 64-bit unwind table
        read, and merge with 32-bit case.

2009-04-27  Anthony Green  <green@moxielogic.com>

        * NEWS: Mention verilog support added to bfd.

2009-04-27  H.J. Lu  <hongjiu.lu@intel.com>

        * objcopy.c (copy_object): Copy pe_opthdr before changing PE
        parameters.

2009-04-24  Cary Coutant  <ccoutant@google.com>

        * dwarf.c (process_extended_line_op): Add DW_LNE_set_discriminator.
        Add missing newlines to HP extensions.

2009-04-17  H.J. Lu  <hongjiu.lu@intel.com>

        * objcopy.c (set_pe_subsystem): Replace efi-rom with sal-rtd.
        * doc/binutils.texi: Likewise.

2009-04-17  H.J. Lu  <hongjiu.lu@intel.com>

        PR binutils/10074
        * objcopy.c: Include coff/i386.h and coff/pe.h.
        (pe_file_alignment): New.
        (pe_heap_commit): Likewise.
        (pe_heap_reserve): Likewise.
        (pe_image_base): Likewise.
        (pe_section_alignment): Likewise.
        (pe_stack_commit): Likewise.
        (pe_stack_reserve): Likewise.
        (pe_subsystem): Likewise.
        (pe_major_subsystem_version): Likewise.
        (pe_minor_subsystem_version): Likewise.
        (set_pe_subsystem): Likewise.
        (convert_efi_target): Likewise.
        (command_line_switch): Add OPTION_FILE_ALIGNMENT,
        OPTION_HEAP, OPTION_IMAGE_BASE, OPTION_SECTION_ALIGNMENT,
        OPTION_STACK and OPTION_SUBSYSTEM.
        (copy_options): Likewise.
        (copy_usage): Add --file-alignment, --heap, --image-base,
        --section-alignment, --stack and --subsystem.
        (copy_object): Set up PE parameters.
        (copy_main): Process Add OPTION_FILE_ALIGNMENT,
        OPTION_HEAP, OPTION_IMAGE_BASE, OPTION_SECTION_ALIGNMENT,
        OPTION_STACK and OPTION_SUBSYSTEM.   Convert EFI target to
        PEI target.

        * NEWS: Mention --file-alignment, --heap, --image-base,
        --section-alignment, --stack and --subsystem command line
        options for objcopy.

        * doc/binutils.texi: Document --file-alignment, --heap,
        --image-base, --section-alignment, --stack and --subsystem
        command line options for objcopy.

2009-04-15  Anthony Green  <green@moxielogic.com>

        * MAINTAINERS: Add myself as Moxie port maintainer.

2009-04-14  Dave Korn  <dave.korn.cygwin@gmail.com>

        * objcopy.c (enum long_section_name_handling):  New enum type.
        (enum command_line_switch):  Add OPTION_LONG_SECTION_NAMES.
        (copy_options[]):  Add entry for --long-section-names option.
        (copy_usage):  Document it.
        (set_long_section_mode):  New subroutine.
        (copy_file):  Call it.
        (copy_main):  Accept OPTION_LONG_SECTION_NAMES and parse arg.
        * doc/binutils.texi:  Update objcopy documentation with details
        of new option.

2009-04-01  Dave Korn  <dave.korn.cygwin@gmail.com>

        * dlltool.c (set_dll_name_from_def):  Accept new second arg that
        indicates if we are building DLL or EXE, and use it to add a
        default suffix to the output filename when none is already present.
        (def_name):  Indicate we are building an EXE when calling it.
        (def_library):  Indicate we are building a DLL when calling it.

2009-04-01  Jari Aalto  <jari.aalto@cante.net>

        PR 9972
        * doc/binutils.texi (strings): Document the -V alias for the
        --version option.
        * strings.c (usage): Likewise.

2009-03-31  Nick Clifton  <nickc@redhat.com>

        PR 9992
        * configure.in: Import Solaris specific largefile test from
        bfd/configure.in.
        * configure: Regenerate.

2009-03-30  Richard Sandiford  <rdsandiford@googlemail.com>

        * MAINTAINERS: Add self.

2009-03-27  Nick Clifton  <nickc@redhat.com>

        * dwarf.c (display_debug_ranges): Add the base address to the
        displayed values for 'Begin' and 'End'.

2009-03-25  Ryan Mansfield  <rmansfield@qnx.com>

        * readelf.c (process_file_header): Don't report a corrupt string
        table index if it is zero.

2009-03-19  H.J. Lu  <hongjiu.lu@intel.com>

        * dwarf.c (dwarf_regnames): Moved before frame_need_space.
        (dwarf_regnames_count): Likewise.
        (frame_need_space): Return int.
        (display_debug_frames): Check invalid registers.

2009-03-19  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (debug_apply_relocations): Check relocations
        against STT_SECTION symbol.

2009-03-18  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (debug_apply_relocations): Allow relocations
        against function symbols.

2009-03-18  Alan Modra  <amodra@bigpond.net.au>

        * sysdep.h: Include alloca-conf.h instead of config.h and remove
        existing #if's handling alloca.
        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.

2009-03-14  Richard Sandiford  <r.sandiford@uk.ibm.com>

        * configure.tgt: Extend AIX 5 behavior to AIX 6 and above.
        * configure.in: Likewise.
        * configure: Regenerate.

2009-03-13  H.J. Lu  <hongjiu.lu@intel.com>

        PR binutils/9945
        * objcopy.c (copy_object): Clear HAS_RELOC when stripping all.

2009-03-11  Chris Demetriou  <cgd@google.com>

        * ar.c (deterministic): New global variable.
        (main): Recognize new 'D' option, which enables 'deterministic mode'.
        (usage): Document new 'D' option.
        (write_archive): Set BFD_DETERMINISTIC_OUTPUT in output archive's
        flags if deterministic mode was requested.
        * doc/binutils.texi (ar): Document deterministic mode ('D' option).

2009-03-09  H.J. Lu  <hongjiu.lu@intel.com>

        PR binutils/9933
        * objcopy.c (filter_symbols): Properly handle common symbols
        in relocatable file.

2009-03-06  Nick Clifton  <nickc@redhat.com>

        * po/es.po: Updated Spanish translation.

2009-03-05  Nick Clifton  <nickc@redhat.com>

        * objdump.c (disassemble_section): If the computed next offset is
        not beyond the current offset then just continue to the end.

2009-03-04  Tristan Gingold  <gingold@adacore.com>

        * MAINTAINERS: Add myself as VMS maintainer.

2009-03-03  Nick Clifton  <nickc@redhat.com>

        * readelf.c: Update formatting.

2009-03-03  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.

2009-03-03  Alan Modra  <amodra@bigpond.net.au>

        * objdump.c (disassemble_section): Mask address before sign extending.

2009-03-02  Sebastian Biallas  <sb@biallas.net>

        * ieee.c (parse_ieee_ty): Add support for undocumented 'v' type.
        (parse_ieee_bb): Set the filename if it has not already been
        discovered.

2009-03-02  Cary Coutant  <ccoutant@google.com>

        * readelf.c (adjust_relative_path): New function.
        (struct archive_info): New type.
        (setup_archive): New function.
        (release_archive): New function.
        (setup_nested_archive): New function.
        (get_archive_member_name): New function.
        (get_archive_member_name_at): New function.
        (make_qualified_name): New function.
        (process_archive): Factor out code for reading archive index and
        long filename table to setup_archive.  Add support for thin archives.

2009-03-02  Nick Clifton  <nickc@redhat.com>

        * po/sk.po: Updated Slovak translation.

2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * configure: Regenerate.

2009-02-23  Cary Coutant <ccoutant@google.com>

        * objdump.c (load_specific_debug_section): New function, from
        load_debug_section.
        (load_debug_section): Use load_specific_debug_section.
        (dump_dwarf_section): Likewise.

2009-02-23  Cary Coutant <ccoutant@google.com>

        * readelf.c (parse_args): Select all sections explicitly for -w.

2009-02-09  Kai Tietz  <kai.tietz@onevision.com>

        * windres.c (set_endianess): Copy name without leading '-'.

2009-02-09  Tristan Gingold  <gingold@adacore.com>

        * NEWS: Mention feature match between objdump and readelf for dumping
        dwarf info.

        * doc/binutils.texi (objdump): Document -W/--dwarf improvments to
        objdump.

        * objdump.c (usage): Update documentation for -W/--dwarf.
        (enum option_values): Add OPTION_DWARF.
        (long_options): --dwarf can accept arguments.
        (dump_dwarf_section): Also check enabled field.
        (main): Option -W can accept arguments, code moved to
        dwarf.c and call dwarf_select_sections_all instead.
        * readelf.c (process_section_headers): Remove do_debug_lines_decoded.
        (parse_args): Move code to...
        * dwarf.c (dwarf_select_sections_by_letters,
        dwarf_select_sections_by_names): : ...here (new functions).
        (do_debug_lines_decoded): Remove and replaced by ...
        (FLAG_DEBUG_LINES_RAW, FLAG_DEBUG_LINES_DECODED): ... new macros.
        (display_debug_lines): Adjust for previous change.
        (dwarf_select_sections_all): New function.
        (debug_displays): Add initializer for enabled field.
        * dwarf.h (do_debug_lines_decoded): Remove.
        Add prototypes for the new functions.
        (struct dwarf_section_display): Add enabled field.

2009-02-06  Nick Clifton  <nickc@redhat.com>

        * po/vi.po: Updated Vietnamese translation.

2009-02-03  Sandip Matte  <sandip@rmicorp.com>

        * readelf.c (get_machine_flags): Handle E_MIPS_MACH_XLR.

2009-02-03  H.J. Lu  <hongjiu.lu@intel.com>

        * NEWS: Move --as-needed change to ...
        * ../ld/NEWS: Here.

2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>

        * configure.in: AC_SUBST pdfdir.
        * Makefile.am: Add install-pdf, install-pdf-am,
        and install-pdf-recursive targets.
        * doc/Makefile.am: Define pdf__strip_dir. Add
        install-pdf and install-pdf-am targets.
        * po/Make-in: Add install-pdf target.
        * configure: Regenerate.
        * Makefile.in: Regenerate.
        * doc/Makefile.in: Regenerate.

2009-02-03  H.J. Lu  <hongjiu.lu@intel.com>

        PR binutils/9784
        * NEWS: Mention --prefix=PREFIX and --prefix-strip=LEVEL.

        * doc/binutils.texi: Document --prefix=PREFIX and
        --prefix-strip=LEVEL.

        * objdump.c: Include "filenames.h".
        (prefix): New.
        (prefix_strip): Likewise.
        (prefix_length): Likewise.
        (usage): Add --prefix=PREFIX and --prefix-strip=LEVEL.
        (option_values): Add OPTION_PREFIX and OPTION_PREFIX_STRIP.
        (long_options): Likewise.
        (show_line): Handle prefix and prefix_strip.
        (main): Handle OPTION_PREFIX and OPTION_PREFIX_STRIP.

        * readelf.c (PATH_MAX): Moved to ...
        * sysdep.h: Here.

2009-01-31  Alan Modra  <amodra@bigpond.net.au>

        * NEWS: Mention --as-needed change.

2009-01-29  Alan Modra  <amodra@bigpond.net.au>

        PR 9798
        * bucomm.c (bfd_nonfatal_message): Use bfd_get_archive_filename.
        (bfd_get_archive_filename): Constify param.
        * bucomm.h (bfd_get_archive_filename): Update prototype.
        * objcopy.c (RETURN_NONFATAL): Delete.
        (copy_unknown_object): Don't call bfd_get_archive_filename for
        bfd_nonfatal_message filename, instead just pass bfd.
        (copy_object): Likewise.
        (copy_archive, copy_file): Likewise.  Expand RETURN_NONFATAL.  On
        bfd_close errors, do not pass the bfd to bfd_nonfatal_message.
        (setup_bfd_headers): Fix error message.

2009-01-27  Nick Clifton  <nickc@redhat.com>

        PR 9774
        * objdump.c (disassemble_section): When the target uses signed
        addresses make sure that we compute signed values.

2009-01-27  Nick Clifton  <nickc@redhat.com>

        * MAINTAINERS: Remove Thiemo Seufer's name from the list of MIPS
        maintainers.

2009-01-26  Nick Clifton  <nickc@redhat.com>

        PR 9766
        * dlltool.c (xlate): When strip text after the @ sign, look for
        the last one not the first one.

2009-01-16  Alan Modra  <amodra@bigpond.net.au>

        * configure.in (commonbfdlib): Delete.
        * configure: Regenerate.

2008-01-14  Charles Wilson  <cygwin@cwilson.fastmail.fm>

        Cleanup code related to --identify option.

        * dlltool.c (file scope): Removed globals identify_ms,
        identify_member_contains_symname_result,
        identify_dll_name_list_head, and identify_dll_name_list_tail.
        Renamed existing typedef dll_name_list_type to
        dll_name_list_node_type.
        Added new typedefs dll_name_list_type, symname_search_data_type,
        and identify_data_type.
        (identify_append_dll_name_to_list): Renamed to...
        (dll_name_list_append): ...here.  Changed signature to accept list
        argument rather than use global.
        (identify_count_dll_name_list): Renamed to...
        (dll_name_list_count): ...here.  Changed signature to accept list
        argument rather than use global.
        (identify_print_dll_name_list): Renamed to...
        (dll_name_list_print): ...here.  Changed signature to accept list
        argument rather than use global.
        (identify_free_dll_name_list): Renamed to...
        (dll_name_list_free_contents): ...here.
        (dll_name_list_free): New function.
        (dll_name_list_create): New function.
        (identify_process_section_p): Changed signature to accept
        ms_style_implib argument rather than use global.
        (identify_member_contains_symname): Expect incoming void * data to
        be symname_search_data_type.
        (identify_dll_for_implib): Use new functions dll_name_list_create
        and dll_name_list_free.  Use new types symname_search_data_type
        and identify_data_type to communicate with search routines.
        (identify_search_section): Expect incoming void * data to be
        identify_data_type. Use its contents rather than global
        variables.

2009-01-13  Charles Wilson  <cygwin@cwilson.fastmail.fm>

        Add --identify-strict option.  Handle ms-style implibs:

        * dlltool.c (file scope): Added new globals identify_ms and
        identify_strict. New typedef dll_name_list_type, and globals
        identify_dll_name_list_head and identify_dll_name_list_tail. Added
        new global identify_member_contains_symname_result.
        (identify_append_dll_name_to_list): New function.
        (identify_count_dll_name_list): New function.
        (identify_print_dll_name_list): New function.
        (identify_free_dll_name_list): New function.
        (identify_search_archive): Changed signature to take function
        pointer to operation to apply to each member, and data to pass on
        to that function.
        (identify_search_member): Changed signature to accept user data
        from caller.
        (identify_member_contains_symname): New function.
        (identify_dll_for_implib): Rewrite. Now determines whether implib
        is ms- or binutils- style, before searching sections for
        dllname. Allows multiple dllnames.
        (identify_process_section_p): Search alternate section for dllname
        when implib is ms-style.
        (identify_search_section): Add additional conditions to excludes
        candidate sections from consideration.
        (usage): Added --identify-strict.
        (long_options): Added --identify-strict.
        (main): Handle --identify-strict option.
        * doc/binutils.texi: Document --identify-strict option.
        * NEWS: Document --identify and --identify-strict options.

2009-01-13  Alan Modra  <amodra@bigpond.net.au>

        PR 7034
        * doc/binutils.texi (objdump -R): Note effect of -d or -D.

2009-01-13  Alan Modra  <amodra@bigpond.net.au>

        * objdump.c (disassemble_section): Don't assume non-instruction
        data if object symbol at given address is in different section.

2009-01-12  Kai Tietz  <kai.tietz@onevision.com>

        * dlltool.c (create_for_pep): New.
        (flush_page): Use create_for_pep instead of using
        macro DLLTOOL_MX86_64 clause.
        (generate_idata_ofile): Likewise.
        (make_one_lib_file): Likewise.
        (make_head): Likewise.
        (make_tail): Likewise.
        (main): Initialize create_for_pep.

2009-01-08  Kai Tietz  <kai.tietz@onevision.com>

        * dlltool.c (use_nul_prefixed_import_tables): New.
        (make_head): Make prefix leading zero prefix element for
        idata$4 and idata$5 dependent to new flag.
        (usage): Add new option  --use-nul-prefixed-import-tables.
        (OPTION_USE_NUL_PREFIXED_IMPORT_TABLES): New.
        (long_options): Add --use-nul-prefixed-import-tables.
        (main): Likewise.
        * doc/binutils.texi: Add new option documentation for
        --use-nul-prefixed-import-tables.
        * NEWS: Add new option.

2009-01-06  Kai Tietz  <kai.tietz@onevision.com>

        * windres.c (set_endianess): Get architecture name
        for internal target names like "pe-arm-wince-little".
        (find_arch_match): New helper.
        * ChangeLog: Reset it.
        * ChangeLog-2008: Moved old ChangeLog.

For older changes see ChangeLog-2008

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: