URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.20.1/] [gas/] [Makefile.am] - Rev 246
Go to most recent revision | Compare with Previous | Blame | View Log
## Process this file with automake to generate Makefile.in
AUTOMAKE_OPTIONS = 1.11 dejagnu foreign no-dist
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
SUBDIRS = doc po
tooldir = $(exec_prefix)/$(target_alias)
YACC = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo @YACC@ ; fi`
LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo @LEX@ ; fi`
# Automake 1.10+ disables lex and yacc output file regeneration if
# maintainer mode is disabled. Avoid this.
am__skiplex =
am__skipyacc =
WARN_CFLAGS = @WARN_CFLAGS@
NO_WERROR = @NO_WERROR@
AM_CFLAGS = $(WARN_CFLAGS)
TARG_CPU = @target_cpu_type@
TARG_CPU_C = $(srcdir)/config/tc-@target_cpu_type@.c
TARG_CPU_O = tc-@target_cpu_type@.o
TARG_CPU_H = $(srcdir)/config/tc-@target_cpu_type@.h
OBJ_FORMAT_C = $(srcdir)/config/obj-@obj_format@.c
OBJ_FORMAT_O = obj-@obj_format@.o
OBJ_FORMAT_H = $(srcdir)/config/obj-@obj_format@.h
TARG_ENV_H = $(srcdir)/config/te-@te_file@.h
ATOF_TARG_C = $(srcdir)/config/atof-@atof@.c
ATOF_TARG_O = atof-@atof@.o
# use @target_cpu_type@ for refering to configured target name
IT_HDRS=itbl-parse.h $(srcdir)/itbl-ops.h
IT_SRCS=itbl-parse.c itbl-lex.c $(srcdir)/itbl-ops.c
IT_DEPS=$(srcdir)/itbl-parse.y $(srcdir)/itbl-lex.l $(srcdir)/config/itbl-@target_cpu_type@.h
IT_OBJS=itbl-parse.o itbl-lex.o itbl-ops.o
# CPU types. This is only used for dependency information.
CPU_TYPES = \
alpha \
arc \
arm \
avr \
bfin \
cr16 \
cris \
crx \
d10v \
d30v \
dlx \
fr30 \
frv \
h8300 \
hppa \
i370 \
i386 \
i860 \
i960 \
ia64 \
ip2k \
lm32 \
m32c \
m32r \
m68hc11 \
m68k \
maxq \
mcore \
mep \
microblaze \
mips \
mmix \
mn10200 \
mn10300 \
msp430 \
mt \
ns32k \
or32 \
pdp11 \
pj \
ppc \
s390 \
score \
sh \
sh64 \
sparc \
spu \
tic30 \
tic4x \
tic54x \
v850 \
vax \
xc16x \
xstormy16 \
xtensa \
z80 \
z8k
# Object format types. This is only used for dependency information.
# We deliberately omit SOM, since it does not work as a cross assembler.
OBJ_FORMATS = \
aout \
coff \
ecoff \
elf \
evax \
macho
# This is an sh case which sets valid according to whether the CPU
# type in the shell variable c and the OS type in the shell variable o
# are supported. This helps cuts down on the amount of dependency
# information.
CPU_OBJ_VALID = \
valid= ; \
case $$o in \
aout) \
case $$c in \
arm | cris | i386 | m68k | ns32k | pdp11 | sparc | tic30 | vax) \
valid=yes ;; \
esac ;; \
coff) \
case $$c in \
arm | h8300 | i386 | i960 | m68k | maxq | mcore | mips | or32 \
| ppc | sh | sparc | tic* | xscale | z80 | z8k) \
valid=yes ;; \
esac ;; \
ecoff) \
case $$c in \
mips | alpha) valid=yes ;; \
esac ;; \
elf) valid=yes ; \
case $$c in \
maxq | ns32k | tic* | z80 | z8k) valid= ;; \
esac ;; \
evax) \
case $$c in \
alpha) valid=yes ;; \
esac ;; \
macho) \
case $$c in \
i386) valid=yes ;; \
esac ;; \
vms) \
case $$c in \
vax) valid=yes ;; \
esac ;; \
esac;
# These are like CPU_TYPES and CPU_OBJ_VALID, for the obj=multi case.
MULTI_CPU_TYPES = i386 mips cris
MULTI_CPU_OBJ_VALID = \
valid= ; \
case $$o in \
aout) \
case $$c in \
i386 | cris) valid=yes ;; \
esac ;; \
coff) \
case $$c in \
i386 | mips) valid=yes ;; \
esac ;; \
ecoff) \
case $$c in \
mips) valid=yes ;; \
esac ;; \
elf) valid=yes ;; \
esac;
# Regular source files.
GAS_CFILES = \
app.c \
as.c \
atof-generic.c \
cond.c \
depend.c \
dwarf2dbg.c \
dw2gencfi.c \
ecoff.c \
ehopt.c \
expr.c \
flonum-copy.c \
flonum-konst.c \
flonum-mult.c \
frags.c \
hash.c \
input-file.c \
input-scrub.c \
listing.c \
literal.c \
macro.c \
messages.c \
output-file.c \
read.c \
remap.c \
sb.c \
stabs.c \
subsegs.c \
symbols.c \
write.c
CFILES = $(GAS_CFILES) itbl-ops.c cgen.c
HFILES = \
as.h \
asintl.h \
bignum.h \
bit_fix.h \
cgen.h \
dwarf2dbg.h \
dw2gencfi.h \
ecoff.h \
emul-target.h \
emul.h \
expr.h \
flonum.h \
frags.h \
hash.h \
input-file.h \
itbl-lex.h \
itbl-ops.h \
listing.h \
macro.h \
obj.h \
output-file.h \
read.h \
sb.h \
struc-symbol.h \
subsegs.h \
symbols.h \
tc.h \
write.h
# CPU files in config.
TARGET_CPU_CFILES = \
config/tc-alpha.c \
config/tc-arc.c \
config/tc-arm.c \
config/tc-avr.c \
config/tc-bfin.c \
config/tc-cr16.c \
config/tc-cris.c \
config/tc-crx.c \
config/tc-d10v.c \
config/tc-d30v.c \
config/tc-dlx.c \
config/tc-fr30.c \
config/tc-frv.c \
config/tc-h8300.c \
config/tc-hppa.c \
config/tc-ia64.c \
config/tc-i370.c \
config/tc-i386.c \
config/tc-i860.c \
config/tc-i960.c \
config/tc-ip2k.c \
config/tc-iq2000.c \
config/tc-lm32.c \
config/tc-m32c.c \
config/tc-m32r.c \
config/tc-m68hc11.c \
config/tc-m68k.c \
config/tc-maxq.c \
config/tc-mcore.c \
config/tc-mep.c \
config/tc-microblaze.c \
config/tc-mips.c \
config/tc-mmix.c \
config/tc-mn10200.c \
config/tc-mn10300.c \
config/tc-moxie.c \
config/tc-msp430.c \
config/tc-mt.c \
config/tc-ns32k.c \
config/tc-or32.c \
config/tc-pdp11.c \
config/tc-pj.c \
config/tc-ppc.c \
config/tc-s390.c \
config/tc-score.c \
config/tc-sh.c \
config/tc-sh64.c \
config/tc-sparc.c \
config/tc-spu.c \
config/tc-tic30.c \
config/tc-tic4x.c \
config/tc-tic54x.c \
config/tc-vax.c \
config/tc-v850.c \
config/tc-xstormy16.c \
config/tc-xc16x.c \
config/tc-xtensa.c \
config/tc-z80.c \
config/tc-z8k.c \
config/xtensa-relax.c
TARGET_CPU_HFILES = \
config/tc-alpha.h \
config/tc-arc.h \
config/tc-arm.h \
config/tc-avr.h \
config/tc-bfin.h \
config/tc-cr16.h \
config/tc-cris.h \
config/tc-crx.h \
config/tc-d10v.h \
config/tc-d30v.h \
config/tc-dlx.h \
config/tc-fr30.h \
config/tc-frv.h \
config/tc-h8300.h \
config/tc-hppa.h \
config/tc-ia64.h \
config/tc-i370.h \
config/tc-i386.h \
config/tc-i860.h \
config/tc-i960.h \
config/tc-ip2k.h \
config/tc-iq2000.h \
config/tc-lm32.h \
config/tc-m32c.h \
config/tc-m32r.h \
config/tc-m68hc11.h \
config/tc-m68k.h \
config/tc-maxq.h \
config/tc-mcore.h \
config/tc-mep.h \
config/tc-microblaze.h \
config/tc-mips.h \
config/tc-mmix.h \
config/tc-mn10200.h \
config/tc-mn10300.h \
config/tc-msp430.h \
config/tc-mt.h \
config/tc-ns32k.h \
config/tc-or32.h \
config/tc-pdp11.h \
config/tc-pj.h \
config/tc-ppc.h \
config/tc-s390.h \
config/tc-score.h \
config/tc-sh.h \
config/tc-sh64.h \
config/tc-sparc.h \
config/tc-spu.h \
config/tc-tic30.h \
config/tc-tic4x.h \
config/tc-tic54x.h \
config/tc-vax.h \
config/tc-v850.h \
config/tc-xstormy16.h \
config/tc-xc16x.h \
config/tc-xtensa.h \
config/tc-z80.h \
config/tc-z8k.h \
config/xtensa-relax.h
# OBJ files in config
OBJ_FORMAT_CFILES = \
config/obj-aout.c \
config/obj-coff.c \
config/obj-ecoff.c \
config/obj-elf.c \
config/obj-evax.c \
config/obj-fdpicelf.c \
config/obj-macho.c \
config/obj-multi.c \
config/obj-som.c
OBJ_FORMAT_HFILES = \
config/obj-aout.h \
config/obj-coff.h \
config/obj-ecoff.h \
config/obj-elf.h \
config/obj-evax.h \
config/obj-fdpicelf.h \
config/obj-macho.h \
config/obj-multi.h \
config/obj-som.h
# Emulation header files in config
TARG_ENV_HFILES = \
config/te-386bsd.h \
config/te-aix5.h \
config/te-armeabi.h \
config/te-armlinuxeabi.h \
config/te-dynix.h \
config/te-epoc-pe.h \
config/te-freebsd.h \
config/te-generic.h \
config/te-gnu.h \
config/te-go32.h \
config/te-hppa.h \
config/te-hppa64.h \
config/te-hppalinux64.h \
config/te-i386aix.h \
config/te-ia64aix.h \
config/te-interix.h \
config/te-lnews.h \
config/te-lynx.h \
config/te-mach.h \
config/te-macos.h \
config/te-nbsd.h \
config/te-nbsd532.h \
config/te-netware.h \
config/te-pc532mach.h \
config/te-pe.h \
config/te-psos.h \
config/te-riscix.h \
config/te-solaris.h \
config/te-sparcaout.h \
config/te-sun3.h \
config/te-svr4.h \
config/te-symbian.h \
config/te-tmips.h \
config/te-vxworks.h \
config/te-wince-pe.h
TARG_ENV_CFILES = \
config/te-vms.c
# Multi files in config
MULTI_CFILES = \
config/e-crisaout.c \
config/e-criself.c \
config/e-i386aout.c \
config/e-i386coff.c \
config/e-i386elf.c \
config/e-mipsecoff.c \
config/e-mipself.c
CONFIG_OBJS = \
$(TARG_CPU_O) \
$(OBJ_FORMAT_O) \
$(ATOF_TARG_O) \
$(extra_objects)
GENERIC_OBJS = \
app.o \
as.o \
atof-generic.o \
cond.o \
depend.o \
dwarf2dbg.o \
dw2gencfi.o \
ehopt.o \
expr.o \
flonum-konst.o \
flonum-copy.o \
flonum-mult.o \
frags.o \
hash.o \
input-file.o \
input-scrub.o \
literal.o \
messages.o \
output-file.o \
read.o \
remap.o \
subsegs.o \
symbols.o \
write.o \
listing.o \
ecoff.o \
stabs.o \
sb.o \
macro.o
CONFIG_ATOF_CFILES = \
config/atof-ieee.c \
config/atof-vax.c
OBJS = $(CONFIG_OBJS) $(GENERIC_OBJS)
POTFILES = $(MULTI_CFILES) $(CONFIG_ATOF_CFILES) \
$(TARG_ENV_HFILES) $(TARG_ENV_CFILES) $(OBJ_FORMAT_HFILES) \
$(OBJ_FORMAT_CFILES) $(TARGET_CPU_HFILES) $(TARGET_CPU_CFILES) \
$(HFILES) $(CFILES)
po/POTFILES.in: @MAINT@ Makefile
for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
&& mv tmp $(srcdir)/po/POTFILES.in
# Note: GASP is now deprecated and has been removed. It is still
# available in the CVS archive or older binutils releases if it is needed.
noinst_PROGRAMS = as-new
noinst_SCRIPTS = $(GDBINIT)
EXTRA_SCRIPTS = .gdbinit
EXTRA_DIST = m68k-parse.c itbl-parse.c itbl-parse.h itbl-lex.c \
bfin-parse.c bfin-parse.h bfin-lex.c
diststuff: $(EXTRA_DIST) info
DISTCLEANFILES = targ-cpu.h obj-format.h targ-env.h itbl-cpu.h cgen-desc.h
# Now figure out from those variables how to compile and link.
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
INCDIR = $(BASEDIR)/include
# This is the variable actually used when we compile.
# Specify the directories to be searched for header files.
# Both . and srcdir are used, in that order,
# so that tm.h and config.h will be found in the compilation
# subdirectory rather than in the source directory.
AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(srcdir)/config \
-I$(INCDIR) -I$(srcdir)/.. -I$(BFDDIR) @INCINTL@ \
-DLOCALEDIR="\"$(datadir)/locale\""
# How to link with both our special library facilities
# and the system's installed libraries.
GASLIBS = @OPCODES_LIB@ ../bfd/libbfd.la ../libiberty/libiberty.a
# Files to be copied away after each stage in building.
STAGESTUFF = *.o $(noinst_PROGRAMS)
as_new_SOURCES = $(GAS_CFILES)
as_new_LDADD = $(TARG_CPU_O) $(OBJ_FORMAT_O) $(ATOF_TARG_O) \
$(extra_objects) $(GASLIBS) $(LIBINTL) $(LIBM)
as_new_DEPENDENCIES = $(TARG_CPU_O) $(OBJ_FORMAT_O) $(ATOF_TARG_O) \
$(extra_objects) $(GASLIBS) $(LIBINTL_DEP)
EXTRA_as_new_SOURCES = $(CFILES) $(HFILES) $(TARGET_CPU_CFILES) \
$(TARGET_CPU_HFILES) $(OBJ_FORMAT_CFILES) $(OBJ_FORMAT_HFILES) \
$(TARG_ENV_CFILES) $(CONFIG_ATOF_CFILES) $(MULTI_CFILES)
EXPECT = expect
RUNTEST = runtest
RUNTESTFLAGS=
check-DEJAGNU: site.exp
if [ -d testsuite ]; then \
true; \
else \
mkdir testsuite; \
fi
rm -f testsuite/site.exp
cp site.exp testsuite/site.exp
rootme=`pwd`; export rootme; \
srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
EXPECT=${EXPECT} ; export EXPECT ; \
runtest=$(RUNTEST); \
cd testsuite; \
if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
$$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
$(RUNTESTFLAGS); \
else echo "WARNING: could not find \`runtest'" 1>&2; :;\
fi
# The m68k operand parser.
EXTRA_as_new_SOURCES += config/m68k-parse.y config/bfin-parse.y
# If m68k-parse.y is in a different directory, then ylwrap will use an
# absolute path when it invokes yacc, which will cause yacc to put the
# absolute path into the generated file. That's a pain when it comes
# to generating snapshots, because it introduces spurious diffs.
# Since when we make the snapshots $(srcdir) = ".", we check for that
# case and handle it differently. This means that anybody who
# configures with $(srcdir) = "." will have to set their path in the
# debugger if they want to debug m68k-parse.y. This is bad, but on
# the other hand it's good that people who use the prebuilt
# m68k-parse.c don't get a spurious absolute path.
m68k-parse.c: $(srcdir)/config/m68k-parse.y
f=$(srcdir)/config/m68k-parse.y; \
if [ $$f = "./config/m68k-parse.y" ]; then \
ln -s config/m68k-parse.y . > /dev/null 2>/dev/null || \
ln config/m68k-parse.y . > /dev/null 2>/dev/null || \
cp config/m68k-parse.y . >/dev/null 2>/dev/null; \
f=m68k-parse.y; \
else true; fi; \
$(SHELL) $(YLWRAP) $$f y.tab.c m68k-parse.c -- $(YACCCOMPILE); \
if [ $$f = "m68k-parse.y" ]; then \
rm -f m68k-parse.y; \
else true; fi
# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
m68k-parse.o: m68k-parse.c
if am__fastdepCC
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f m68k-parse.c || echo $(srcdir)/`m68k-parse.c $(NO_WERROR)
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='m68k-parse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
$(COMPILE) -c `test -f m68k-parse.c || echo $(srcdir)/`m68k-parse.c $(NO_WERROR)
endif
# Don't let the .y.h rule clobber m68k-parse.h.
m68k-parse.h: ; @true
$(srcdir)/config/m68k-parse.h: ; @true
bfin-parse.c: $(srcdir)/config/bfin-parse.y
$(SHELL) $(YLWRAP) $(srcdir)/config/bfin-parse.y y.tab.c bfin-parse.c y.tab.h bfin-parse.h -- $(YACCCOMPILE) -d ;
bfin-parse.h: bfin-parse.c
bfin-parse.o: bfin-parse.c \
$(srcdir)/config/bfin-aux.h $(srcdir)/config/bfin-defs.h \
$(INCDIR)/elf/common.h $(INCDIR)/elf/bfin.h $(BFDDIR)/libbfd.h
bfin-parse.h: ; @true
$(srcdir)/config/bfin-parse.h: ; @true
bfin-lex.c: $(srcdir)/config/bfin-lex.l
$(SHELL) $(YLWRAP) $(srcdir)/config/bfin-lex.l lex.yy.c bfin-lex.c -- $(LEXCOMPILE)
bfin-lex.o: bfin-lex.c bfin-parse.h $(srcdir)/config/bfin-defs.h
if am__fastdepCC
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f bfin-lex.c || echo $(srcdir)/`bfin-lex.c $(NO_WERROR)
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='bfin-lex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
$(COMPILE) -c `test -f bfin-lex.c || echo $(srcdir)/`bfin-lex.c $(NO_WERROR)
endif
# The instruction table specification lexical analyzer and parser.
# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
itbl-lex.o: itbl-lex.c itbl-parse.h
if am__fastdepCC
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f itbl-lex.c || echo $(srcdir)/`itbl-lex.c $(NO_WERROR)
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='itbl-lex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
$(COMPILE) -c `test -f itbl-lex.c || echo $(srcdir)/`itbl-lex.c $(NO_WERROR)
endif
# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
itbl-parse.o: itbl-parse.c
if am__fastdepCC
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f itbl-parse.c || echo $(srcdir)/`itbl-parse.c $(NO_WERROR)
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='itbl-parse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
$(COMPILE) -c `test -f itbl-parse.c || echo $(srcdir)/`itbl-parse.c $(NO_WERROR)
endif
itbl-parse.c: $(srcdir)/itbl-parse.y
$(SHELL) $(YLWRAP) $(srcdir)/itbl-parse.y y.tab.c itbl-parse.c y.tab.h itbl-parse.h -- $(YACCCOMPILE) -d
itbl-parse.h: itbl-parse.c ; @true
itbl-ops.o: itbl-parse.h
# stand-alone itbl assembler & disassembler
EXTRA_PROGRAMS = itbl-test
itbl_test_SOURCES = itbl-parse.y itbl-lex.l
itbl_test_LDADD = itbl-tops.o itbl-test.o $(GASLIBS) @LEXLIB@
itbl-tops.o: itbl-ops.c itbl-parse.h
if am__fastdepCC
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -o $@ -c -DSTAND_ALONE $(srcdir)/itbl-ops.c
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='itbl-ops.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
$(COMPILE) -o $@ -DSTAND_ALONE -c $(srcdir)/itbl-ops.c
endif
itbl-test.o: $(srcdir)/testsuite/gas/all/itbl-test.c
if am__fastdepCC
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ -DSTAND_ALONE $(srcdir)/testsuite/gas/all/itbl-test.c
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='itbl-test.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
$(COMPILE) -c -DSTAND_ALONE $(srcdir)/testsuite/gas/all/itbl-test.c
endif
# CGEN interface.
CGEN_CPU_PREFIX = @cgen_cpu_prefix@
cgen.o: cgen.c cgen.h cgen-desc.h subsegs.h \
$(INCDIR)/obstack.h $(INCDIR)/opcode/cgen.h \
$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-desc.h \
$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-opc.h
# Remake the info files.
MOSTLYCLEANFILES = $(STAGESTUFF) core \
testsuite/*.o testsuite/*.out testsuite/gas.log testsuite/gas.sum \
testsuite/site.exp site.bak site.exp stage stage1 stage2
.PHONY: install-exec-local install-data-local
.PHONY: install-exec-bindir install-exec-tooldir
install-exec-local: install-exec-bindir @install_tooldir@
install-exec-bindir: $(noinst_PROGRAMS)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(noinst_PROGRAMS)'; for p in $$list; do \
if test -f $$p; then \
echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
else :; fi; \
done
install-exec-tooldir: install-exec-bindir $(noinst_PROGRAMS)
$(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
n=`echo as | sed '$(transform)'`; \
if [ "$(bindir)/$$n$(EXEEXT)" != "$(tooldir)/bin/as$(EXEEXT)" ]; then \
rm -f $(DESTDIR)$(tooldir)/bin/as$(EXEEXT); \
ln $(DESTDIR)$(bindir)/$$n$(EXEEXT) $(DESTDIR)$(tooldir)/bin/as$(EXEEXT) >/dev/null 2>/dev/null \
|| $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) as-new$(EXEEXT) $(DESTDIR)$(tooldir)/bin/as$(EXEEXT); \
else \
true ; \
fi
# These exist for maintenance purposes.
.PHONY: bootstrap bootstrap2 bootstrap3 stage1 stage2 stage3 comparison
bootstrap: as-new
$(MAKE) stage1
rm -f stage && ln -s stage1 stage
$(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)
$(MAKE) stage2
rm -f stage && ln -s stage2 stage
$(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)
$(MAKE) comparison against=stage2
bootstrap2:
rm -f stage && ln -s stage1 stage
$(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)
$(MAKE) stage2
rm -f stage && ln -s stage2 stage
$(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)
$(MAKE) comparison against=stage2
bootstrap3:
rm -f stage && ln -s stage2 stage
$(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)
$(MAKE) comparison against=stage2
# Copy the object files from a particular stage into a subdirectory.
stage1:
-mkdir stage1
-mv $(STAGESTUFF) stage1
if [ -f stage1/as-new$(EXEEXT) -a ! -f stage1/as$(EXEEXT) ] ; then (cd stage1 ; ln -s as-new$(EXEEXT) as$(EXEEXT)) ; fi
stage2:
-mkdir stage2
-mv $(STAGESTUFF) stage2
if [ -f stage2/as-new$(EXEEXT) -a ! -f stage2/as$(EXEEXT) ] ; then (cd stage2 ; ln -s as-new$(EXEEXT) as$(EXEEXT)) ; fi
stage3:
-mkdir stage3
-mv $(STAGESTUFF) stage3
if [ -f stage3/as-new$(EXEEXT) -a ! -f stage3/as$(EXEEXT) ] ; then (cd stage3 ; ln -s as-new as$(EXEEXT)) ; fi
against=stage2
# This rule is derived from corresponding code in the Makefile.in for gcc.
# The "tail +16c" is to bypass headers which may include timestamps or
# temporary assembly file names.
comparison:
x=0 ; \
for file in *.o ; do \
tail +16c ./$$file > tmp-foo1; \
if tail +16c ${against}/$$file > tmp-foo2 2>/dev/null ; then \
if cmp tmp-foo1 tmp-foo2 ; then \
true ; \
else \
echo $$file differs ; \
x=1 ; \
fi ; \
else true; fi ; \
done ; \
exit $$x
-rm -f tmp-foo*
.PHONY: de-stage1 de-stage2 de-stage3
de-stage1:
- (cd stage1 ; rm -f as$(EXEEXT) ; mv -f * ..)
- rmdir stage1
de-stage2:
- (cd stage2 ; rm -f as$(EXEEXT) ; mv -f * ..)
- rmdir stage2
de-stage3:
- (cd stage3 ; rm -f as$(EXEEXT) ; mv -f * ..)
- rmdir stage3
CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in $(srcdir)/configure.tgt
Go to most recent revision | Compare with Previous | Blame | View Log