URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.20.1/] [gas/] [config/] [tc-lm32.c] - Rev 299
Go to most recent revision | Compare with Previous | Blame | View Log
/* tc-lm32.c - Lattice Mico32 assembler. Copyright 2008 Free Software Foundation, Inc. Contributed by Jon Beniston <jon@beniston.com> This file is part of GAS, the GNU Assembler. GAS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GAS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GAS; see the file COPYING. If not, write to the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #include <string.h> #include <stdlib.h> #include "as.h" #include "safe-ctype.h" #include "subsegs.h" #include "bfd.h" #include "safe-ctype.h" #include "opcodes/lm32-desc.h" #include "opcodes/lm32-opc.h" #include "cgen.h" #include "elf/lm32.h" typedef struct { const CGEN_INSN *insn; const CGEN_INSN *orig_insn; CGEN_FIELDS fields; #if CGEN_INT_INSN_P CGEN_INSN_INT buffer [1]; #define INSN_VALUE(buf) (*(buf)) #else unsigned char buffer[CGEN_MAX_INSN_SIZE]; #define INSN_VALUE(buf) (buf) #endif char *addr; fragS *frag; int num_fixups; fixS *fixups[GAS_CGEN_MAX_FIXUPS]; int indices[MAX_OPERAND_INSTANCES]; } lm32_insn; /* Configuration options */ #define LM_CFG_MULTIPLIY_ENABLED 0x0001 #define LM_CFG_DIVIDE_ENABLED 0x0002 #define LM_CFG_BARREL_SHIFT_ENABLED 0x0004 #define LM_CFG_SIGN_EXTEND_ENABLED 0x0008 #define LM_CFG_USER_ENABLED 0x0010 #define LM_CFG_ICACHE_ENABLED 0x0020 #define LM_CFG_DCACHE_ENABLED 0x0040 #define LM_CFG_BREAK_ENABLED 0x0080 static unsigned config = 0U; /* Target specific assembler tokens / delimiters. */ const char comment_chars[] = "#"; const char line_comment_chars[] = "#"; const char line_separator_chars[] = ";"; const char EXP_CHARS[] = "eE"; const char FLT_CHARS[] = "dD"; /* Target specific assembly directives. */ const pseudo_typeS md_pseudo_table[] = { { "align", s_align_bytes, 0 }, { "byte", cons, 1 }, { "hword", cons, 2 }, { "word", cons, 4 }, { "dword", cons, 8 }, {(char *)0 , (void(*)(int))0, 0} }; /* Target specific command line options. */ const char * md_shortopts = ""; struct option md_longopts[] = { #define OPTION_MULTIPLY_ENABLED (OPTION_MD_BASE + 1) { "mmultiply-enabled", no_argument, NULL, OPTION_MULTIPLY_ENABLED }, #define OPTION_DIVIDE_ENABLED (OPTION_MD_BASE + 2) { "mdivide-enabled", no_argument, NULL, OPTION_DIVIDE_ENABLED }, #define OPTION_BARREL_SHIFT_ENABLED (OPTION_MD_BASE + 3) { "mbarrel-shift-enabled", no_argument, NULL, OPTION_BARREL_SHIFT_ENABLED }, #define OPTION_SIGN_EXTEND_ENABLED (OPTION_MD_BASE + 4) { "msign-extend-enabled", no_argument, NULL, OPTION_SIGN_EXTEND_ENABLED }, #define OPTION_USER_ENABLED (OPTION_MD_BASE + 5) { "muser-enabled", no_argument, NULL, OPTION_USER_ENABLED }, #define OPTION_ICACHE_ENABLED (OPTION_MD_BASE + 6) { "micache-enabled", no_argument, NULL, OPTION_ICACHE_ENABLED }, #define OPTION_DCACHE_ENABLED (OPTION_MD_BASE + 7) { "mdcache-enabled", no_argument, NULL, OPTION_DCACHE_ENABLED }, #define OPTION_BREAK_ENABLED (OPTION_MD_BASE + 8) { "mbreak-enabled", no_argument, NULL, OPTION_BREAK_ENABLED }, #define OPTION_ALL_ENABLED (OPTION_MD_BASE + 9) { "mall-enabled", no_argument, NULL, OPTION_ALL_ENABLED }, }; size_t md_longopts_size = sizeof (md_longopts); /* Display architecture specific options. */ void md_show_usage (FILE * fp) { fprintf (fp, "LM32 specific options:\n" " -mmultiply-enabled enable multiply instructions\n" " -mdivide-enabled enable divide and modulus instructions\n" " -mbarrel-shift-enabled enable multi-bit shift instructions\n" " -msign-extend-enabled enable sign-extension instructions\n" " -muser-enabled enable user-defined instructions\n" " -micache-enabled enable instruction cache instructions\n" " -mdcache-enabled enable data cache instructions\n" " -mbreak-enabled enable the break instruction\n" " -mall-enabled enable all optional instructions\n" ); } /* Parse command line options. */ int md_parse_option (int c, char * arg ATTRIBUTE_UNUSED) { switch (c) { case OPTION_MULTIPLY_ENABLED: config |= LM_CFG_MULTIPLIY_ENABLED; break; case OPTION_DIVIDE_ENABLED: config |= LM_CFG_DIVIDE_ENABLED; break; case OPTION_BARREL_SHIFT_ENABLED: config |= LM_CFG_BARREL_SHIFT_ENABLED; break; case OPTION_SIGN_EXTEND_ENABLED: config |= LM_CFG_SIGN_EXTEND_ENABLED; break; case OPTION_USER_ENABLED: config |= LM_CFG_USER_ENABLED; break; case OPTION_ICACHE_ENABLED: config |= LM_CFG_ICACHE_ENABLED; break; case OPTION_DCACHE_ENABLED: config |= LM_CFG_DCACHE_ENABLED; break; case OPTION_BREAK_ENABLED: config |= LM_CFG_BREAK_ENABLED; break; case OPTION_ALL_ENABLED: config |= LM_CFG_MULTIPLIY_ENABLED; config |= LM_CFG_DIVIDE_ENABLED; config |= LM_CFG_BARREL_SHIFT_ENABLED; config |= LM_CFG_SIGN_EXTEND_ENABLED; config |= LM_CFG_USER_ENABLED; config |= LM_CFG_ICACHE_ENABLED; config |= LM_CFG_DCACHE_ENABLED; config |= LM_CFG_BREAK_ENABLED; break; default: return 0; } return 1; } /* Do any architecture specific initialisation. */ void md_begin (void) { /* Initialize the `cgen' interface. */ /* Set the machine number and endian. */ gas_cgen_cpu_desc = lm32_cgen_cpu_open (CGEN_CPU_OPEN_MACHS, 0, CGEN_CPU_OPEN_ENDIAN, CGEN_ENDIAN_BIG, CGEN_CPU_OPEN_END); lm32_cgen_init_asm (gas_cgen_cpu_desc); /* This is a callback from cgen to gas to parse operands. */ cgen_set_parse_operand_fn (gas_cgen_cpu_desc, gas_cgen_parse_operand); } /* Turn an integer of n bytes (in val) into a stream of bytes appropriate for use in the a.out file, and stores them in the array pointed to by buf. */ void md_number_to_chars (char * buf, valueT val, int n) { if (target_big_endian) number_to_chars_bigendian (buf, val, n); else number_to_chars_littleendian (buf, val, n); } /* Turn a string in input_line_pointer into a floating point constant of type TYPE, and store the appropriate bytes in *LITP. The number of LITTLENUMS emitted is stored in *SIZEP. An error message is returned, or NULL on OK. */ char * md_atof (int type, char *litP, int *sizeP) { int i; int prec; LITTLENUM_TYPE words[4]; char *t; switch (type) { case 'f': prec = 2; break; case 'd': prec = 4; break; default: *sizeP = 0; return _("bad call to md_atof"); } t = atof_ieee (input_line_pointer, type, words); if (t) input_line_pointer = t; *sizeP = prec * sizeof (LITTLENUM_TYPE); if (target_big_endian) { for (i = 0; i < prec; i++) { md_number_to_chars (litP, (valueT) words[i], sizeof (LITTLENUM_TYPE)); litP += sizeof (LITTLENUM_TYPE); } } else { for (i = prec - 1; i >= 0; i--) { md_number_to_chars (litP, (valueT) words[i], sizeof (LITTLENUM_TYPE)); litP += sizeof (LITTLENUM_TYPE); } } return NULL; } /* Called for each undefined symbol. */ symbolS * md_undefined_symbol (char * name ATTRIBUTE_UNUSED) { return 0; } /* Round up a section size to the appropriate boundary. */ valueT md_section_align (asection *seg, valueT addr) { int align = bfd_get_section_alignment (stdoutput, seg); return ((addr + (1 << align) - 1) & (-1 << align)); } /* This function assembles the instructions. It emits the frags/bytes to the sections and creates the relocation entries. */ void md_assemble (char * str) { lm32_insn insn; char * errmsg; /* Initialize GAS's cgen interface for a new instruction. */ gas_cgen_init_parse (); insn.insn = lm32_cgen_assemble_insn (gas_cgen_cpu_desc, str, &insn.fields, insn.buffer, &errmsg); if (!insn.insn) { as_bad ("%s", errmsg); return; } gas_cgen_finish_insn (insn.insn, insn.buffer, CGEN_FIELDS_BITSIZE (&insn.fields), 1, NULL); } /* Return the bfd reloc type for OPERAND of INSN at fixup FIXP. Returns BFD_RELOC_NONE if no reloc type can be found. *FIXP may be modified if desired. */ bfd_reloc_code_real_type md_cgen_lookup_reloc (const CGEN_INSN *insn ATTRIBUTE_UNUSED, const CGEN_OPERAND *operand, fixS *fixP ATTRIBUTE_UNUSED) { switch (operand->type) { case LM32_OPERAND_GOT16: return BFD_RELOC_LM32_16_GOT; case LM32_OPERAND_GOTOFFHI16: return BFD_RELOC_LM32_GOTOFF_HI16; case LM32_OPERAND_GOTOFFLO16: return BFD_RELOC_LM32_GOTOFF_LO16; case LM32_OPERAND_GP16: return BFD_RELOC_GPREL16; case LM32_OPERAND_LO16: return BFD_RELOC_LO16; case LM32_OPERAND_HI16: return BFD_RELOC_HI16; case LM32_OPERAND_BRANCH: return BFD_RELOC_LM32_BRANCH; case LM32_OPERAND_CALL: return BFD_RELOC_LM32_CALL; default: break; } return BFD_RELOC_NONE; } /* Return the position from which the PC relative adjustment for a PC relative fixup should be made. */ long md_pcrel_from (fixS *fixP) { /* Shouldn't get called. */ abort (); /* Return address of current instruction. */ return fixP->fx_where + fixP->fx_frag->fr_address; } /* The location from which a PC relative jump should be calculated, given a PC relative reloc. */ long md_pcrel_from_section (fixS * fixP, segT sec) { if ((fixP->fx_addsy != (symbolS *) NULL) && (! S_IS_DEFINED (fixP->fx_addsy) || (S_GET_SEGMENT (fixP->fx_addsy) != sec))) { /* The symbol is undefined (or is defined but not in this section). Let the linker figure it out. */ return 0; } /*fprintf(stderr, "%s extern %d local %d\n", S_GET_NAME (fixP->fx_addsy), S_IS_EXTERN (fixP->fx_addsy), S_IS_LOCAL (fixP->fx_addsy));*/ /* FIXME: Weak problem? */ if ((fixP->fx_addsy != (symbolS *) NULL) && S_IS_EXTERNAL (fixP->fx_addsy)) { /* If the symbol is external, let the linker handle it. */ return 0; } return fixP->fx_where + fixP->fx_frag->fr_address; } /* Return true if we can partially resolve a relocation now. */ bfd_boolean lm32_fix_adjustable (fixS * fixP) { /* We need the symbol name for the VTABLE entries */ if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY) return FALSE; return TRUE; } /* Relaxation isn't required/supported on this target. */ int md_estimate_size_before_relax (fragS *fragp ATTRIBUTE_UNUSED, asection *seg ATTRIBUTE_UNUSED) { abort (); return 0; } void md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, asection *sec ATTRIBUTE_UNUSED, fragS *fragP ATTRIBUTE_UNUSED) { abort (); } void md_apply_fix (fixS * fixP, valueT * valP, segT seg) { /* Fix for weak symbols. Why do we have fx_addsy for weak symbols? */ if (fixP->fx_addsy != NULL && S_IS_WEAK (fixP->fx_addsy)) *valP = 0; gas_cgen_md_apply_fix (fixP, valP, seg); return; }
Go to most recent revision | Compare with Previous | Blame | View Log