OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.20.1/] [gas/] [itbl-parse.y] - Rev 304

Go to most recent revision | Compare with Previous | Blame | View Log

/* itbl-parse.y
   Copyright 1997, 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc.

   This file is part of GAS, the GNU Assembler.

   GAS is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3, or (at your option)
   any later version.

   GAS is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with GAS; see the file COPYING.  If not, write to the Free
   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
   02110-1301, USA.  */

%{

/* 

Yacc grammar for instruction table entries.

=======================================================================
Original Instruction table specification document:

            MIPS Coprocessor Table Specification
            ====================================

This document describes the format of the MIPS coprocessor table.  The
table specifies a list of valid functions, data registers and control
registers that can be used in coprocessor instructions.  This list,
together with the coprocessor instruction classes listed below,
specifies the complete list of coprocessor instructions that will
be recognized and assembled by the GNU assembler.  In effect,
this makes the GNU assembler table-driven, where the table is
specified by the programmer.

The table is an ordinary text file that the GNU assembler reads when
it starts.  Using the information in the table, the assembler
generates an internal list of valid coprocessor registers and
functions.  The assembler uses this internal list in addition to the
standard MIPS registers and instructions which are built-in to the 
assembler during code generation.

To specify the coprocessor table when invoking the GNU assembler, use
the command line option "--itbl file", where file is the
complete name of the table, including path and extension.

Examples:

            gas -t cop.tbl test.s -o test.o
            gas -t /usr/local/lib/cop.tbl test.s -o test.o
            gas --itbl d:\gnu\data\cop.tbl test.s -o test.o

Only one table may be supplied during a single invocation of
the assembler.


Instruction classes
===================

Below is a list of the valid coprocessor instruction classes for
any given coprocessor "z".  These instructions are already recognized
by the assembler, and are listed here only for reference.

Class   format                        instructions
-------------------------------------------------
Class1:
        op base rt offset
                                                            LWCz rt,offset (base)
                                                            SWCz rt,offset (base)
Class2:
        COPz sub rt rd 0
                                                            MTCz rt,rd
                                                            MFCz rt,rd
                                                            CTCz rt,rd
                                                            CFCz rt,rd
Class3:
        COPz CO cofun
                                                            COPz cofun
Class4:
        COPz BC br offset
                                                            BCzT offset
                                                            BCzF offset
Class5:
        COPz sub rt rd 0
                                                            DMFCz rt,rd
                                                            DMTCz rt,rd
Class6:
        op base rt offset
                                                            LDCz rt,offset (base)
                                                            SDCz rt,offset (base)
Class7:
        COPz BC br offset
                                                            BCzTL offset
                                                            BCzFL offset

The coprocessor table defines coprocessor-specific registers that can
be used with all of the above classes of instructions, where
appropriate.  It also defines additional coprocessor-specific
functions for Class3 (COPz cofun) instructions, Thus, the table allows
the programmer to use convenient mnemonics and operands for these
functions, instead of the COPz mmenmonic and cofun operand.

The names of the MIPS general registers and their aliases are defined
by the assembler and will be recognized as valid register names by the
assembler when used (where allowed) in coprocessor instructions.
However, the names and values of all coprocessor data and control
register mnemonics must be specified in the coprocessor table.


Table Grammar
=============

Here is the grammar for the coprocessor table:

            table -> entry*

            entry -> [z entrydef] [comment] '\n'

            entrydef -> type name val
            entrydef -> 'insn' name val funcdef ; type of entry (instruction)

            z -> 'p'['0'..'3']               ; processor number 
            type -> ['dreg' | 'creg' | 'greg' ]      ; type of entry (register)
        ; 'dreg', 'creg' or 'greg' specifies a data, control, or general
        ;           register mnemonic, respectively
            name -> [ltr|dec]*               ; mnemonic of register/function
            val -> [dec|hex]                 ; register/function number (integer constant)

            funcdef -> frange flags fields
                                ; bitfield range for opcode
                                ; list of fields' formats
            fields -> field*
            field -> [','] ftype frange flags
            flags -> ['*' flagexpr]
            flagexpr -> '[' flagexpr ']'
            flagexpr -> val '|' flagexpr 
            ftype -> [ type | 'immed' | 'addr' ]
        ; 'immed' specifies an immediate value; see grammar for "val" above
                ; 'addr' specifies a C identifier; name of symbol to be resolved at 
        ;           link time
            frange -> ':' val '-' val   ; starting to ending bit positions, where
                                ; where 0 is least significant bit
            frange -> (null)            ; default range of 31-0 will be assumed

            comment -> [';'|'#'] [char]*
            char -> any printable character
            ltr -> ['a'..'z'|'A'..'Z'] 
            dec -> ['0'..'9']*                                       ; value in decimal
            hex -> '0x'['0'..'9' | 'a'..'f' | 'A'..'F']*        ; value in hexadecimal 


Examples
========

Example 1:

The table:

            p1 dreg d1 1             ; data register "d1" for COP1 has value 1
            p1 creg c3 3             ; ctrl register "c3" for COP1 has value 3
            p3 func fill 0x1f:24-20           ; function "fill" for COP3 has value 31 and 
                        ; no fields

will allow the assembler to accept the following coprocessor instructions:

            LWC1 d1,0x100 ($2)
            fill

Here, the general purpose register "$2", and instruction "LWC1", are standard 
mnemonics built-in to the MIPS assembler.  


Example 2:

The table:

            p3 dreg d3 3             ; data register "d3" for COP3 has value 3
            p3 creg c2 22            ; control register "c2" for COP3 has value 22
            p3 func fee 0x1f:24-20 dreg:17-13 creg:12-8 immed:7-0 
                ; function "fee" for COP3 has value 31, and 3 fields 
                ; consisting of a data register, a control register, 
                ; and an immediate value.

will allow the assembler to accept the following coprocessor instruction:

            fee d3,c2,0x1

and will emit the object code:

            31-26  25 24-20 19-18  17-13 12-8  7-0
            COPz   CO fun                     dreg  creg  immed
            010011 1  11111 00       00011 10110 00000001 

            0x4ff07601


Example 3:

The table:

            p3 dreg d3 3             ; data register "d3" for COP3 has value 3
            p3 creg c2 22            ; control register "c2" for COP3 has value 22
            p3 func fuu 0x01f00001 dreg:17-13 creg:12-8

will allow the assembler to accept the following coprocessor
instruction:

            fuu d3,c2

and will emit the object code:

            31-26  25 24-20 19-18  17-13 12-8  7-0
            COPz   CO fun                     dreg  creg  
            010011 1  11111 00       00011 10110 00000001 

            0x4ff07601

In this way, the programmer can force arbitrary bits of an instruction
to have predefined values.

=======================================================================
Additional notes:

Encoding of ranges:
To handle more than one bit position range within an instruction,
use 0s to mask out the ranges which don't apply.
May decide to modify the syntax to allow commas separate multiple 
ranges within an instruction (range','range).

Changes in grammar:
        The number of parms argument to the function entry
was deleted from the original format such that we now count the fields.

----
FIXME! should really change lexical analyzer 
to recognize 'dreg' etc. in context sensitive way.
Currently function names or mnemonics may be incorrectly parsed as keywords

FIXME! hex is ambiguous with any digit

*/

#include "as.h"
#include "itbl-lex.h"
#include "itbl-ops.h"

/* #define DEBUG */

#ifdef DEBUG
#ifndef DBG_LVL
#define DBG_LVL 1
#endif
#else
#define DBG_LVL 0
#endif

#if DBG_LVL >= 1
#define DBG(x) printf x
#else
#define DBG(x) 
#endif

#if DBG_LVL >= 2
#define DBGL2(x) printf x
#else
#define DBGL2(x) 
#endif

static int sbit, ebit;
static struct itbl_entry *insn=0;
static int yyerror (const char *);

%}

%union 
  {
    char *str;
    int num;
    int processor;
    unsigned long val;
  }

%token      DREG CREG GREG IMMED ADDR INSN NUM ID NL PNUM
%type       <val> value flags flagexpr
%type       <num> number NUM ftype regtype pnum PNUM
%type       <str> ID name

%start insntbl

%%

insntbl:
        entrys
        ;

entrys:
        entry entrys
        |
        ;

entry:
        pnum regtype name value NL
          {
            DBG (("line %d: entry pnum=%d type=%d name=%s value=x%x\n", 
                    insntbl_line, $1, $2, $3, $4));
            itbl_add_reg ($1, $2, $3, $4);
          }
        | pnum INSN name value range flags
          {
            DBG (("line %d: entry pnum=%d type=INSN name=%s value=x%x",
                    insntbl_line, $1, $3, $4));
            DBG ((" sbit=%d ebit=%d flags=0x%x\n", sbit, ebit, $6));
            insn=itbl_add_insn ($1, $3, $4, sbit, ebit, $6);
          }
        fieldspecs NL
          {}
        | NL
        | error NL
        ;

fieldspecs:
        ',' fieldspec fieldspecs
        | fieldspec fieldspecs
        |
        ;

ftype:
        regtype 
          {
            DBGL2 (("ftype\n"));
            $$ = $1;
          }
        | ADDR 
          {
            DBGL2 (("addr\n"));
            $$ = ADDR;
          }
        | IMMED
          {
            DBGL2 (("immed\n"));
            $$ = IMMED;
          }
        ;

fieldspec:
        ftype range flags
          {
            DBG (("line %d: field type=%d sbit=%d ebit=%d, flags=0x%x\n", 
                    insntbl_line, $1, sbit, ebit, $3));
            itbl_add_operand (insn, $1, sbit, ebit, $3);
          }
        ;

flagexpr:
        NUM '|' flagexpr
          {
            $$ = $1 | $3;
          }
        | '[' flagexpr ']'
          {
            $$ = $2;
          }
        | NUM
          {
            $$ = $1;
          }
        ;

flags:
        '*' flagexpr
          {
            DBGL2 (("flags=%d\n", $2));
            $$ = $2;
          }
        | 
          {
            $$ = 0;
          }
        ;

range:
        ':' NUM '-' NUM
          {
            DBGL2 (("range %d %d\n", $2, $4));
            sbit = $2;
            ebit = $4;
          }
        |
          {
            sbit = 31;
            ebit = 0;
          }
        ;
            
pnum:
        PNUM
          {
            DBGL2 (("pnum=%d\n",$1));
            $$ = $1;
          }
        ;

regtype:
             DREG
          {
            DBGL2 (("dreg\n"));
            $$ = DREG;
          }
        | CREG
          {
            DBGL2 (("creg\n"));
            $$ = CREG;
          }
        | GREG
          {
            DBGL2 (("greg\n"));
            $$ = GREG;
          }
        ;

name:
        ID
          {
            DBGL2 (("name=%s\n",$1));
            $$ = $1; 
          }
        ;

number:
        NUM
          {
            DBGL2 (("num=%d\n",$1));
            $$ = $1;
          }
        ;

value:
        NUM
          {
            DBGL2 (("val=x%x\n",$1));
            $$ = $1;
          }
        ;
%%

static int
yyerror (msg)
     const char *msg;
{
  printf ("line %d: %s\n", insntbl_line, msg);
  return 0;
}

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.