OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.20.1/] [ld/] [po/] [zh_TW.po] - Rev 301

Go to most recent revision | Compare with Previous | Blame | View Log

# Traditional Chinese translation for ld.
# Copyright (C) 2005, 06 Free Software Foundation, Inc.
# This file is distributed under the same license as the ld package.
# Meng Jie <zuxyhere@eastday.com>, 2005.
# Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: ld 2.16.93\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2006-03-25 18:36+0100\n"
"PO-Revision-Date: 2006-06-20 15:22+0800\n"
"Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: emultempl/armcoff.em:72
#, c-format
msgid "  --support-old-code   Support interworking with old code\n"
msgstr "  --support-old-code   支援與舊式程式碼的交互作用\n"

#: emultempl/armcoff.em:73
#, c-format
msgid "  --thumb-entry=<sym>  Set the entry point to be Thumb symbol <sym>\n"
msgstr "  --thumb-entry =<sym>  設定進入點為縮圖符號 <sym>\n"

#: emultempl/armcoff.em:121
#, c-format
msgid "Errors encountered processing file %s"
msgstr "處理檔案 %s 時遇到錯誤"

#: emultempl/armcoff.em:190 emultempl/pe.em:1460
msgid "%P: warning: '--thumb-entry %s' is overriding '-e %s'\n"
msgstr "%P: 警告: '--thumb-entry %s' 會蓋過 '-e %s'\n"

#: emultempl/armcoff.em:195 emultempl/pe.em:1465
msgid "%P: warning: connot find thumb start symbol %s\n"
msgstr "%P: 警告: 無法找到縮圖開始符號 %s\n"

#: emultempl/pe.em:304
#, c-format
msgid "  --base_file <basefile>             Generate a base file for relocatable DLLs\n"
msgstr "  --base_file <基址檔案>             為可重定位的 DLL 產生一個基址檔案\n"

#: emultempl/pe.em:305
#, c-format
msgid "  --dll                              Set image base to the default for DLLs\n"
msgstr "  --dll                              設定 DLL 的預設映像基底位址\n"

#: emultempl/pe.em:306
#, c-format
msgid "  --file-alignment <size>            Set file alignment\n"
msgstr "  --file-alignment <大小>            設定檔案對齊邊界\n"

#: emultempl/pe.em:307
#, c-format
msgid "  --heap <size>                      Set initial size of the heap\n"
msgstr "  --heap <大小>                      設定堆積的初始大小\n"

#: emultempl/pe.em:308
#, c-format
msgid "  --image-base <address>             Set start address of the executable\n"
msgstr "  --image-base <位址>                設定可執行檔案的起始位址\n"

#: emultempl/pe.em:309
#, c-format
msgid "  --major-image-version <number>     Set version number of the executable\n"
msgstr "  --major-image-version <號碼>         設定可執行檔案的版本號碼\n"

#: emultempl/pe.em:310
#, c-format
msgid "  --major-os-version <number>        Set minimum required OS version\n"
msgstr "  --major-os-version <號碼>            設定對作業系統版本的最低要求\n"

#: emultempl/pe.em:311
#, c-format
msgid "  --major-subsystem-version <number> Set minimum required OS subsystem version\n"
msgstr "  --major-subsystem-version <號碼>     設定對作業系統子系統版本的最低要求\n"

#: emultempl/pe.em:312
#, c-format
msgid "  --minor-image-version <number>     Set revision number of the executable\n"
msgstr "  --minor-image-version <號碼>         設定可執行檔案的修訂版本號\n"

#: emultempl/pe.em:313
#, c-format
msgid "  --minor-os-version <number>        Set minimum required OS revision\n"
msgstr "  --minor-os-version <號碼>            設定對作業系統修訂版本的最低要求\n"

#: emultempl/pe.em:314
#, c-format
msgid "  --minor-subsystem-version <number> Set minimum required OS subsystem revision\n"
msgstr "  --minor-subsystem-version <號碼>     設定對作業系統子系統修訂版本的最低要求\n"

#: emultempl/pe.em:315
#, c-format
msgid "  --section-alignment <size>         Set section alignment\n"
msgstr "  --section-alignment <大小>         設定區段的對齊邊界\n"

#: emultempl/pe.em:316
#, c-format
msgid "  --stack <size>                     Set size of the initial stack\n"
msgstr "  --stack <大小>                     設定初始堆疊的大小\n"

#: emultempl/pe.em:317
#, c-format
msgid "  --subsystem <name>[:<version>]     Set required OS subsystem [& version]\n"
msgstr "  --subsystem <名稱>[:<版本>]          設定需要的作業系統子系統[& 版本號]\n"

#: emultempl/pe.em:318
#, c-format
msgid "  --support-old-code                 Support interworking with old code\n"
msgstr "  --support-old-code                 支援與舊式程式碼的交互作用\n"

#: emultempl/pe.em:319
#, c-format
msgid "  --thumb-entry=<symbol>             Set the entry point to be Thumb <symbol>\n"
msgstr "  --thumb-entry=<符號>             設定進入點到是縮圖<符號>\n"

#: emultempl/pe.em:321
#, c-format
msgid "  --add-stdcall-alias                Export symbols with and without @nn\n"
msgstr "  --add-stdcall-alias                匯出帶與不帶 @nn 的符號\n"

#: emultempl/pe.em:322
#, c-format
msgid "  --disable-stdcall-fixup            Don't link _sym to _sym@nn\n"
msgstr "  --disable-stdcall-fixup            不將 _sym 鏈結至 _sym@nn\n"

#: emultempl/pe.em:323
#, c-format
msgid "  --enable-stdcall-fixup             Link _sym to _sym@nn without warnings\n"
msgstr "  --enable-stdcall-fixup             將 _sym 鏈結至 _sym@nn 而不給予警告\n"

#: emultempl/pe.em:324
#, c-format
msgid "  --exclude-symbols sym,sym,...      Exclude symbols from automatic export\n"
msgstr "  --exclude-symbols 符號,符號,…    將一些符號排除在自動匯出以外\n"

#: emultempl/pe.em:325
#, c-format
msgid "  --exclude-libs lib,lib,...         Exclude libraries from automatic export\n"
msgstr "  --exclude-libs 函式庫,函式庫,…           將一些函式庫排除在自動匯出以外\n"

#: emultempl/pe.em:326
#, c-format
msgid "  --export-all-symbols               Automatically export all globals to DLL\n"
msgstr "  --export-all-symbols               自動將所有全域變數匯出至 DLL\n"

#: emultempl/pe.em:327
#, c-format
msgid "  --kill-at                          Remove @nn from exported symbols\n"
msgstr "  --kill-at                          從匯出符號中移去 @nn\n"

#: emultempl/pe.em:328
#, c-format
msgid "  --out-implib <file>                Generate import library\n"
msgstr "  --out-implib <檔案>                產生匯入函式庫\n"

#: emultempl/pe.em:329
#, c-format
msgid "  --output-def <file>                Generate a .DEF file for the built DLL\n"
msgstr "  --output-def <檔案>                為建立的 DLL 產生一個 .DEF 檔案\n"

#: emultempl/pe.em:330
#, c-format
msgid "  --warn-duplicate-exports           Warn about duplicate exports.\n"
msgstr "  --warn-duplicate-exports           對重複匯出給予警告。\n"

#: emultempl/pe.em:331
#, c-format
msgid ""
"  --compat-implib                    Create backward compatible import libs;\n"
"                                       create __imp_<SYMBOL> as well.\n"
msgstr ""
"  --compat-implib                    產生後向相容的匯入函式庫;\n"
"                                       同時產生 __imp_<符號>。\n"

#: emultempl/pe.em:333
#, c-format
msgid ""
"  --enable-auto-image-base           Automatically choose image base for DLLs\n"
"                                       unless user specifies one\n"
msgstr "  --enable-auto-image-base           除非使用者指定否則自動選擇 DLL 的映像基底位址\n"

#: emultempl/pe.em:335
#, c-format
msgid "  --disable-auto-image-base          Do not auto-choose image base. (default)\n"
msgstr "  --disable-auto-image-base          不自動選擇映像基底位址。(預設)\n"

#: emultempl/pe.em:336
#, c-format
msgid ""
"  --dll-search-prefix=<string>       When linking dynamically to a dll without\n"
"                                       an importlib, use <string><basename>.dll\n"
"                                       in preference to lib<basename>.dll \n"
msgstr ""
"  --dll-search-prefix=<字串>       動態鏈結至 DLL 而缺少匯入函式庫時,使用\n"
"                                      <字串><基本名稱>.dll 而不是 lib<基本名稱>.dll\n"

#: emultempl/pe.em:339
#, c-format
msgid ""
"  --enable-auto-import               Do sophistcated linking of _sym to\n"
"                                       __imp_sym for DATA references\n"
msgstr ""
"  --enable-auto-import               為實作 DATA 參照,使用複雜的方式將 _sym\n"
"                                       鏈結至 __imp_sym\n"

#: emultempl/pe.em:341
#, c-format
msgid "  --disable-auto-import              Do not auto-import DATA items from DLLs\n"
msgstr "  --disable-auto-import              不為 DLL 自動匯入 DATA 項\n"

#: emultempl/pe.em:342
#, c-format
msgid ""
"  --enable-runtime-pseudo-reloc      Work around auto-import limitations by\n"
"                                       adding pseudo-relocations resolved at\n"
"                                       runtime.\n"
msgstr ""
"  --enable-runtime-pseudo-reloc      利用在執行階段加入已解析的假性重定址\n"
"                                       來做為自動匯入限制的解決方法。\n"

#: emultempl/pe.em:345
#, c-format
msgid ""
"  --disable-runtime-pseudo-reloc     Do not add runtime pseudo-relocations for\n"
"                                       auto-imported DATA.\n"
msgstr "  --disable-runtime-pseudo-reloc     不加入用於自動匯入資料的執行階段假性重定址。\n"

#: emultempl/pe.em:347
#, c-format
msgid ""
"  --enable-extra-pe-debug            Enable verbose debug output when building\n"
"                                       or linking to DLLs (esp. auto-import)\n"
msgstr ""
"  --enable-extra-pe-debug            當產生或鏈結至 DLL 時(尤其當自動匯入時)啟用\n"
"                                       詳細的除錯輸出\n"

#: emultempl/pe.em:350
#, c-format
msgid ""
"  --large-address-aware              Executable supports virtual addresses\n"
"                                       greater than 2 gigabytes\n"
msgstr "  --large-address-aware              可執行檔案支援大於 2 GB 的虛擬記憶體位址\n"

#: emultempl/pe.em:417
msgid "%P: warning: bad version number in -subsystem option\n"
msgstr "%P: 警告:-subsystem 選項中出現不當的版本號碼\n"

#: emultempl/pe.em:448
msgid "%P%F: invalid subsystem type %s\n"
msgstr "%P%F: 無效的子系統型態 %s\n"

#: emultempl/pe.em:487
msgid "%P%F: invalid hex number for PE parameter '%s'\n"
msgstr "%P%F: 無效的十六進位數字用於 PE 參數 '%s'\n"

#: emultempl/pe.em:504
msgid "%P%F: strange hex info for PE parameter '%s'\n"
msgstr "%P%F: 怪異的十六進位資訊用於 PE 參數 '%s'\n"

#: emultempl/pe.em:521
#, c-format
msgid "%s: Can't open base file %s\n"
msgstr "%s:無法開啟基址檔案 %s\n"

#: emultempl/pe.em:737
msgid "%P: warning, file alignment > section alignment.\n"
msgstr "%P: 警告,檔案對齊 > 區段對齊。\n"

#: emultempl/pe.em:824 emultempl/pe.em:851
#, c-format
msgid "Warning: resolving %s by linking to %s\n"
msgstr "警告:藉由鏈結到 %2$s 以解決 %1$s\n"

#: emultempl/pe.em:829 emultempl/pe.em:856
msgid "Use --enable-stdcall-fixup to disable these warnings\n"
msgstr "使用 --enable-stdcall-fixup 來停用這些警告\n"

#: emultempl/pe.em:830 emultempl/pe.em:857
msgid "Use --disable-stdcall-fixup to disable these fixups\n"
msgstr "使用 --disable-stdcall-fixup 來停用這些修正\n"

#: emultempl/pe.em:876
#, c-format
msgid "%C: Cannot get section contents - auto-import exception\n"
msgstr "%C: 無法取得區段內容 - 自動匯入異常\n"

#: emultempl/pe.em:913
#, c-format
msgid "Info: resolving %s by linking to %s (auto-import)\n"
msgstr "資訊:藉由鏈結到 %2$s 以解決 %1$s (自動匯入)\n"

#: emultempl/pe.em:986
msgid "%F%P: PE operations on non PE file.\n"
msgstr "%F%P: 在非 PE 檔案上執行 PE 作業。\n"

#: emultempl/pe.em:1261
#, c-format
msgid "Errors encountered processing file %s\n"
msgstr "處理檔案 %s 時發生錯誤\n"

#: emultempl/pe.em:1284
#, c-format
msgid "Errors encountered processing file %s for interworking"
msgstr "處理檔案 %s 交互作用時發生錯誤"

#: emultempl/pe.em:1345 ldexp.c:522 ldlang.c:2946 ldlang.c:5800 ldlang.c:5831
#: ldmain.c:1167
msgid "%P%F: bfd_link_hash_lookup failed: %E\n"
msgstr "%P%F: bfd_link_hash_lookup 失敗:%E\n"

#: ldcref.c:154
msgid "%X%P: bfd_hash_table_init of cref table failed: %E\n"
msgstr "%X%P: cref 表格的 bfd_hash_table_init 失敗:%E\n"

#: ldcref.c:160
msgid "%X%P: cref_hash_lookup failed: %E\n"
msgstr "%X%P: cref_hash_lookup 失敗:%E\n"

#: ldcref.c:226
#, c-format
msgid ""
"\n"
"Cross Reference Table\n"
"\n"
msgstr ""
"\n"
"交叉參照表\n"
"\n"

#: ldcref.c:227
msgid "Symbol"
msgstr "符號"

#: ldcref.c:235
#, c-format
msgid "File\n"
msgstr "檔案\n"

#: ldcref.c:239
#, c-format
msgid "No symbols\n"
msgstr "無符號\n"

#: ldcref.c:360 ldcref.c:482
msgid "%B%F: could not read symbols; %E\n"
msgstr "%B%F: 無法讀取符號; %E\n"

#: ldcref.c:364 ldcref.c:486 ldmain.c:1232 ldmain.c:1236
msgid "%B%F: could not read symbols: %E\n"
msgstr "%B%F: 無法讀取符號: %E\n"

#: ldcref.c:415
msgid "%P: symbol `%T' missing from main hash table\n"
msgstr "%P: 符號「%T」從主要雜湊表遺失\n"

#: ldcref.c:557 ldcref.c:564 ldmain.c:1279 ldmain.c:1286
msgid "%B%F: could not read relocs: %E\n"
msgstr "%B%F: 無法讀取重定址:%E\n"

#. We found a reloc for the symbol.  The symbol is defined
#. in OUTSECNAME.  This reloc is from a section which is
#. mapped into a section from which references to OUTSECNAME
#. are prohibited.  We must report an error.
#: ldcref.c:591
msgid "%X%C: prohibited cross reference from %s to `%T' in %s\n"
msgstr "%X%C: 在 %3$s 中從 %1$s 到 `%2$T' 禁止的交叉參考\n"

#: ldctor.c:84
msgid "%P%X: Different relocs used in set %s\n"
msgstr "%P%X: 在設定 %s 中所使用的不同重定址\n"

#: ldctor.c:102
msgid "%P%X: Different object file formats composing set %s\n"
msgstr "%P%X: 不同的目的檔案格式撰寫設定 %s\n"

#: ldctor.c:281 ldctor.c:295
msgid "%P%X: %s does not support reloc %s for set %s\n"
msgstr "%P%X: %s 不支援重定 %s 用於設定 %s\n"

#: ldctor.c:316
msgid "%P%X: Unsupported size %d for set %s\n"
msgstr "%P%X: 不支援大小 %d 用於設定 %s\n"

#: ldctor.c:337
msgid ""
"\n"
"Set                 Symbol\n"
"\n"
msgstr ""
"\n"
"設定                 符號\n"
"\n"

#: ldemul.c:236
#, c-format
msgid "%S SYSLIB ignored\n"
msgstr "%S SYSLIB 忽略\n"

#: ldemul.c:242
#, c-format
msgid "%S HLL ignored\n"
msgstr "%S HLL 忽略\n"

#: ldemul.c:262
msgid "%P: unrecognised emulation mode: %s\n"
msgstr "%P: 無法辨認的模擬模式: %s\n"

#: ldemul.c:263
msgid "Supported emulations: "
msgstr "支援的模擬:"

#: ldemul.c:305
#, c-format
msgid "  no emulation specific options.\n"
msgstr "   無特定選項的模擬。\n"

#: ldexp.c:338
#, c-format
msgid "%F%S %% by zero\n"
msgstr "%F%S 對零取模\n"

#: ldexp.c:346
#, c-format
msgid "%F%S / by zero\n"
msgstr "%F%S 被零除\n"

#: ldexp.c:536
#, c-format
msgid "%X%S: unresolvable symbol `%s' referenced in expression\n"
msgstr "%X%S:在運算式中參照到無法解析的符號「%s」\n"

#: ldexp.c:547
#, c-format
msgid "%F%S: undefined symbol `%s' referenced in expression\n"
msgstr "%F%S:在運算式中參照了未定義的符號「%s」\n"

#: ldexp.c:608 ldexp.c:621
#, c-format
msgid "%F%S: undefined MEMORY region `%s' referenced in expression\n"
msgstr "%F%S:在運算式中參照了未定義的記憶體區域「%s」\n"

#: ldexp.c:683
#, c-format
msgid "%F%S can not PROVIDE assignment to location counter\n"
msgstr "%F%S 無法提供指派到位置計數器\n"

#: ldexp.c:697
#, c-format
msgid "%F%S invalid assignment to location counter\n"
msgstr "%F%S 無效的指派位置計數器\n"

#: ldexp.c:700
#, c-format
msgid "%F%S assignment to location counter invalid outside of SECTION\n"
msgstr "%F%S 指派到無效的區段外側位置計數器\n"

#: ldexp.c:709
msgid "%F%S cannot move location counter backwards (from %V to %V)\n"
msgstr "%F%S 無法向後移動位置計數器(從 %V 到 %V)\n"

#: ldexp.c:748
msgid "%P%F:%s: hash creation failed\n"
msgstr "%P%F:%s:建立雜湊表失敗\n"

#: ldexp.c:1000 ldexp.c:1025
#, c-format
msgid "%F%S nonconstant expression for %s\n"
msgstr "%F%S 非常數運算式用於 %s\n"

#: ldexp.c:1082
#, c-format
msgid "%F%S non constant expression for %s\n"
msgstr "%F%S 非常數運算式用於 %s\n"

#: ldfile.c:139
#, c-format
msgid "attempt to open %s failed\n"
msgstr "試圖開啟 %s 失敗\n"

#: ldfile.c:141
#, c-format
msgid "attempt to open %s succeeded\n"
msgstr "試圖開啟 %s 成功\n"

#: ldfile.c:147
msgid "%F%P: invalid BFD target `%s'\n"
msgstr "%F%P: 無效的 BFD 目標「%s」\n"

#: ldfile.c:255 ldfile.c:282
msgid "%P: skipping incompatible %s when searching for %s\n"
msgstr "%P: 當搜尋用於 %s 時跳過不相容的 %s \n"

#: ldfile.c:267
msgid "%F%P: attempted static link of dynamic object `%s'\n"
msgstr "%F%P: 試圖靜態鏈結的動態物件「%s」\n"

#: ldfile.c:384
msgid "%F%P: %s (%s): No such file: %E\n"
msgstr "%F%P: %s(%s):無此檔案: %E\n"

#: ldfile.c:387
msgid "%F%P: %s: No such file: %E\n"
msgstr "%F%P: %s: 無此檔案: %E\n"

#: ldfile.c:417
msgid "%F%P: cannot find %s inside %s\n"
msgstr "%F%P: 無法在 %2$s 內部找到 %1$s\n"

#: ldfile.c:420
msgid "%F%P: cannot find %s\n"
msgstr "%F%P: 無法找到 %s\n"

#: ldfile.c:437 ldfile.c:453
#, c-format
msgid "cannot find script file %s\n"
msgstr "無法找到命令稿檔案 %s\n"

#: ldfile.c:439 ldfile.c:455
#, c-format
msgid "opened script file %s\n"
msgstr "已開啟的命令稿檔案 %s\n"

#: ldfile.c:499
msgid "%P%F: cannot open linker script file %s: %E\n"
msgstr "%P%F: 無法開啟鏈結器命令稿檔案 %s: %E\n"

#: ldfile.c:546
msgid "%P%F: cannot represent machine `%s'\n"
msgstr "%P%F: 無法表述機器「%s」\n"

#: ldlang.c:940 ldlang.c:982 ldlang.c:2695
msgid "%P%F: can not create hash table: %E\n"
msgstr "%P%F: 無法建立雜湊表:%E\n"

#: ldlang.c:1025
msgid "%P:%S: warning: redeclaration of memory region '%s'\n"
msgstr "%P:%S: 警告:記憶體區域 '%s' 的重新宣告\n"

#: ldlang.c:1031
msgid "%P:%S: warning: memory region %s not declared\n"
msgstr "%P:%S: 警告:記憶體區域 %s 未宣告\n"

#: ldlang.c:1108 ldlang.c:1135
msgid "%P%F: failed creating section `%s': %E\n"
msgstr "%P%F: 產生區段「%s」時失敗: %E\n"

#: ldlang.c:1601
msgid ""
"\n"
"Memory Configuration\n"
"\n"
msgstr ""
"\n"
"記憶體配置\n"
"\n"

#: ldlang.c:1603
msgid "Name"
msgstr "名稱"

#: ldlang.c:1603
msgid "Origin"
msgstr "來源"

#: ldlang.c:1603
msgid "Length"
msgstr "長度"

#: ldlang.c:1603
msgid "Attributes"
msgstr "屬性"

#: ldlang.c:1643
#, c-format
msgid ""
"\n"
"Linker script and memory map\n"
"\n"
msgstr ""
"\n"
"鏈結器命令稿和記憶體對映\n"
"\n"

#: ldlang.c:1709
msgid "%P%F: Illegal use of `%s' section\n"
msgstr "%P%F:「%s」區段的非法使用\n"

#: ldlang.c:1716
msgid "%P%F: output format %s cannot represent section called %s\n"
msgstr "%P%F: 輸出格式 %s 無法表述名為 %s 的區段\n"

#: ldlang.c:2313
msgid "%B: file not recognized: %E\n"
msgstr "%B: 檔案無法辨識:%E\n"

#: ldlang.c:2314
msgid "%B: matching formats:"
msgstr "%B: 匹配格式:"

#: ldlang.c:2321
msgid "%F%B: file not recognized: %E\n"
msgstr "%F%B: 檔案無法辨識:%E\n"

#: ldlang.c:2385
msgid "%F%B: member %B in archive is not an object\n"
msgstr "%F%B: 成員 %B 在歸檔中並非物件\n"

#: ldlang.c:2396 ldlang.c:2410
msgid "%F%B: could not read symbols: %E\n"
msgstr "%F%B: 無法讀取符號:%E\n"

#: ldlang.c:2665
msgid "%P: warning: could not find any targets that match endianness requirement\n"
msgstr "%P: 警告:無法找到任何符合尾序需求的目標\n"

#: ldlang.c:2679
msgid "%P%F: target %s not found\n"
msgstr "%P%F: 找不到目標 %s\n"

#: ldlang.c:2681
msgid "%P%F: cannot open output file %s: %E\n"
msgstr "%P%F: 無法開啟輸出檔案 %s: %E\n"

#: ldlang.c:2687
msgid "%P%F:%s: can not make object file: %E\n"
msgstr "%P%F:%s: 無法製作目的檔案:%E\n"

#: ldlang.c:2691
msgid "%P%F:%s: can not set architecture: %E\n"
msgstr "%P%F:%s: 無法設定架構:%E\n"

#: ldlang.c:2839
msgid "%P%F: bfd_hash_lookup failed creating symbol %s\n"
msgstr "%P%F: bfd_hash_lookup 產生符號 %s 時失敗\n"

#: ldlang.c:2857
msgid "%P%F: bfd_hash_allocate failed creating symbol %s\n"
msgstr "%P%F: bfd_hash_allocate 產生符號 %s 時失敗\n"

#: ldlang.c:3288
msgid " load address 0x%V"
msgstr "  載入位址 0x%V"

#: ldlang.c:3528
msgid "%W (size before relaxing)\n"
msgstr "%W (鬆開之前的大小)\n"

#: ldlang.c:3615
#, c-format
msgid "Address of section %s set to "
msgstr "區段 %s 的位址設定到 "

#: ldlang.c:3768
#, c-format
msgid "Fail with %d\n"
msgstr "%d 時失敗\n"

#: ldlang.c:4040
msgid "%X%P: section %s [%V -> %V] overlaps section %s [%V -> %V]\n"
msgstr "%X%P: 區段 %s [%V-> %V] 重疊了區段 %s [%V-> %V]\n"

#: ldlang.c:4065
msgid "%X%P: address 0x%v of %B section %s is not within region %s\n"
msgstr "%X%P: 位址 0x% 的 v%B 區段 %s 並非在區域 %s 之內\n"

#: ldlang.c:4074
msgid "%X%P: region %s is full (%B section %s)\n"
msgstr "%X%P: 區域 %s 已滿 (%B區段 %s)\n"

#: ldlang.c:4114
#, c-format
msgid "%F%S: non constant or forward reference address expression for section %s\n"
msgstr "%F%S: 用於區段 %s 的非常數或是向前參考的位址運算式\n"

#: ldlang.c:4139
msgid "%P%X: Internal error on COFF shared library section %s\n"
msgstr "%P%X: 於 COFF 共用程式庫區段 %s 的內部錯誤\n"

#: ldlang.c:4197
msgid "%P%F: error: no memory region specified for loadable section `%s'\n"
msgstr "%P%F: 錯誤:無指定用於可載入區段「%s」的記憶體區域\n"

#: ldlang.c:4202
msgid "%P: warning: no memory region specified for loadable section `%s'\n"
msgstr "%P: 警告:無指定用於可載入區段「%s」的記憶體區域\n"

#: ldlang.c:4224
msgid "%P: warning: changing start of section %s by %lu bytes\n"
msgstr "%P: 警告:將區段的開始 %s 以 %lu 位元組變更\n"

#: ldlang.c:4388
msgid "%P%F: can't relax section: %E\n"
msgstr "%P%F: 無法鬆開區段:%E\n"

#: ldlang.c:4636
msgid "%F%P: invalid data statement\n"
msgstr "%F%P: 無效的資料敘述\n"

#: ldlang.c:4669
msgid "%F%P: invalid reloc statement\n"
msgstr "%F%P: 無效的重定址敘述\n"

#: ldlang.c:4802
msgid "%P%F:%s: can't set start address\n"
msgstr "%P%F:%s: 無法設定起始位址\n"

#: ldlang.c:4815 ldlang.c:4834
msgid "%P%F: can't set start address\n"
msgstr "%P%F: 無法設定起始位址\n"

#: ldlang.c:4827
msgid "%P: warning: cannot find entry symbol %s; defaulting to %V\n"
msgstr "%P: 警告:無法找到項目符號 %s; 預設為 %V\n"

#: ldlang.c:4839
msgid "%P: warning: cannot find entry symbol %s; not setting start address\n"
msgstr "%P: 警告:無法找到項目符號 %s; 無法設定起始位址\n"

#: ldlang.c:4888
msgid "%P%F: Relocatable linking with relocations from format %s (%B) to format %s (%B) is not supported\n"
msgstr "%P%F: 並不支援從格式 %s (%B) 到格式 %s (%B) 的重定址鏈結\n"

#: ldlang.c:4898
msgid "%P: warning: %s architecture of input file `%B' is incompatible with %s output\n"
msgstr "%P: 警告:輸入檔案 `%2$B' 的架構 %1$s 與 %s 輸出不相容\n"

#: ldlang.c:4920
msgid "%P%X: failed to merge target specific data of file %B\n"
msgstr "%P%X: 合併目標檔案 %B 的特定資料時失敗\n"

#: ldlang.c:5004
msgid ""
"\n"
"Allocating common symbols\n"
msgstr ""
"\n"
"配置公共符號\n"

#: ldlang.c:5005
msgid ""
"Common symbol       size              file\n"
"\n"
msgstr ""
"公共符號            大小              檔案\n"
"\n"

#: ldlang.c:5131
msgid "%P%F: invalid syntax in flags\n"
msgstr "%P%F: 在旗標中出現無效的語法\n"

#: ldlang.c:5406
msgid "%P%F: Failed to create hash table\n"
msgstr "%P%F: 建立雜湊表時失敗\n"

#: ldlang.c:5722
msgid "%P%F: multiple STARTUP files\n"
msgstr "%P%F: 多重啟動檔案\n"

#: ldlang.c:5770
msgid "%X%P:%S: section has both a load address and a load region\n"
msgstr "%X%P:%S: 區段同時有載入位址和載入區域\n"

#: ldlang.c:6007
msgid "%F%P: bfd_record_phdr failed: %E\n"
msgstr "%F%P: bfd_record_phdr 失敗:%E\n"

#: ldlang.c:6027
msgid "%X%P: section `%s' assigned to non-existent phdr `%s'\n"
msgstr "%X%P: 區段「%s」被指派到不存在的 phdr「%s」\n"

#: ldlang.c:6418
msgid "%X%P: unknown language `%s' in version information\n"
msgstr "%X%P: 在版本資訊中出現不明的語言「%s」\n"

#: ldlang.c:6560
msgid "%X%P: anonymous version tag cannot be combined with other version tags\n"
msgstr "%X%P: 匿名版本標記無法與其他版本標記合併\n"

#: ldlang.c:6569
msgid "%X%P: duplicate version tag `%s'\n"
msgstr "%X%P:重複的版本標記「%s」\n"

#: ldlang.c:6589 ldlang.c:6598 ldlang.c:6615 ldlang.c:6625
msgid "%X%P: duplicate expression `%s' in version information\n"
msgstr "%X%P: 在版本資訊中出現重複的運算式「%s」\n"

#: ldlang.c:6665
msgid "%X%P: unable to find version dependency `%s'\n"
msgstr "%X%P: 無法找到版本相依性「%s」\n"

#: ldlang.c:6687
msgid "%X%P: unable to read .exports section contents\n"
msgstr "%X%P: 無法讀取 .exports 區段內容\n"

#: ldmain.c:232
msgid "%X%P: can't set BFD default target to `%s': %E\n"
msgstr "%X%P: 無法設定 BFD 預設目標到「%s」:%E\n"

#: ldmain.c:345
msgid "%P%F: --relax and -r may not be used together\n"
msgstr "%P%F: --relax 和 -r 不能一起使用\n"

#: ldmain.c:347
msgid "%P%F: -r and -shared may not be used together\n"
msgstr "%P%F: -r 和 -shared 不能一起使用\n"

#: ldmain.c:353
msgid "%P%F: -F may not be used without -shared\n"
msgstr "%P%F:-F 必須與 -shared 一起作用\n"

#: ldmain.c:355
msgid "%P%F: -f may not be used without -shared\n"
msgstr "%P%F:-f 必須與 -shared 一起作用\n"

#: ldmain.c:397
msgid "using external linker script:"
msgstr "使用外部鏈結器命令稿:"

#: ldmain.c:399
msgid "using internal linker script:"
msgstr "使用內部鏈結器命令稿:"

#: ldmain.c:433
msgid "%P%F: no input files\n"
msgstr "%P%F:沒有輸入檔案\n"

#: ldmain.c:437
msgid "%P: mode %s\n"
msgstr "%P: 模式 %s\n"

#: ldmain.c:453
msgid "%P%F: cannot open map file %s: %E\n"
msgstr "%P%F: 無法開啟對應檔案 %s: %E\n"

#: ldmain.c:485
msgid "%P: link errors found, deleting executable `%s'\n"
msgstr "%P: 找到鏈結錯誤,刪除可執行檔案「%s」\n"

#: ldmain.c:494
msgid "%F%B: final close failed: %E\n"
msgstr "%F%B: 最後的關閉失敗: %E\n"

#: ldmain.c:520
msgid "%X%P: unable to open for source of copy `%s'\n"
msgstr "%X%P: 無法開啟複製的來源「%s」\n"

#: ldmain.c:523
msgid "%X%P: unable to open for destination of copy `%s'\n"
msgstr "%X%P: 無法開啟複製的目的「%s」\n"

#: ldmain.c:530
msgid "%P: Error writing file `%s'\n"
msgstr "%P: 寫入檔案「%s」時發生錯誤\n"

#: ldmain.c:535 pe-dll.c:1494
#, c-format
msgid "%P: Error closing file `%s'\n"
msgstr "%P: 關閉檔案「%s」時發生錯誤\n"

#: ldmain.c:551
#, c-format
msgid "%s: total time in link: %ld.%06ld\n"
msgstr "%s: 鏈結總時間: %ld.%06ld\n"

#: ldmain.c:554
#, c-format
msgid "%s: data size %ld\n"
msgstr "%s: 資料大小 %ld\n"

#: ldmain.c:637
msgid "%P%F: missing argument to -m\n"
msgstr "%P%F: 缺少 -m 的引數\n"

#: ldmain.c:784 ldmain.c:803 ldmain.c:834
msgid "%P%F: bfd_hash_table_init failed: %E\n"
msgstr "%P%F: bfd_hash_table_init 失敗:%E\n"

#: ldmain.c:788 ldmain.c:807
msgid "%P%F: bfd_hash_lookup failed: %E\n"
msgstr "%P%F: bfd_hash_lookup 失敗:%E\n"

#: ldmain.c:821
msgid "%X%P: error: duplicate retain-symbols-file\n"
msgstr "%X%P: 錯誤:重製 retain-symbols-file\n"

#: ldmain.c:864
msgid "%P%F: bfd_hash_lookup for insertion failed: %E\n"
msgstr "%P%F: bfd_hash_lookup 用於插入時失敗:%E\n"

#: ldmain.c:869
msgid "%P: `-retain-symbols-file' overrides `-s' and `-S'\n"
msgstr "%P:「-retain-symbols-file」強制覆寫「-s」和「-S」\n"

#: ldmain.c:944
#, c-format
msgid ""
"Archive member included because of file (symbol)\n"
"\n"
msgstr ""
"由於檔案(符號)而包含了歸檔成員\n"
"\n"

#: ldmain.c:1014
msgid "%X%C: multiple definition of `%T'\n"
msgstr "%X%C:「%T」的多重定義\n"

#: ldmain.c:1017
msgid "%D: first defined here\n"
msgstr "%D:第一次定義在此\n"

#: ldmain.c:1021
msgid "%P: Disabling relaxation: it will not work with multiple definitions\n"
msgstr "%P: 停用鬆開:多重定義將無法作用\n"

#: ldmain.c:1051
msgid "%B: warning: definition of `%T' overriding common\n"
msgstr "%B: 警告:「%T」的定義覆寫公共定義\n"

#: ldmain.c:1054
msgid "%B: warning: common is here\n"
msgstr "%B: 警告: 公共定義在此\n"

#: ldmain.c:1061
msgid "%B: warning: common of `%T' overridden by definition\n"
msgstr "%B: 警告: 公共的「%T」由定義所覆寫\n"

#: ldmain.c:1064
msgid "%B: warning: defined here\n"
msgstr "%B:警告:在此定義\n"

#: ldmain.c:1071
msgid "%B: warning: common of `%T' overridden by larger common\n"
msgstr "%B: 警告:公共的「%T」由較大的共同點所覆寫\n"

#: ldmain.c:1074
msgid "%B: warning: larger common is here\n"
msgstr "%B: 警告: 較大的共同點在此\n"

#: ldmain.c:1078
msgid "%B: warning: common of `%T' overriding smaller common\n"
msgstr "%B: 警告:公共的「%T」由較小的共同點所覆寫\n"

#: ldmain.c:1081
msgid "%B: warning: smaller common is here\n"
msgstr "%B: 警告: 較小的共同點在此\n"

#: ldmain.c:1085
msgid "%B: warning: multiple common of `%T'\n"
msgstr "%B: 警告:「%T」的多重共同點\n"

#: ldmain.c:1087
msgid "%B: warning: previous common is here\n"
msgstr "%B: 警告:前一個共同點在此\n"

#: ldmain.c:1107 ldmain.c:1145
msgid "%P: warning: global constructor %s used\n"
msgstr "%P: 警告:使用全域建構子 %s\n"

#: ldmain.c:1155
msgid "%P%F: BFD backend error: BFD_RELOC_CTOR unsupported\n"
msgstr "%P%F: BFD 後端錯誤:不支援 BFD_RELOC_CTOR\n"

#. We found a reloc for the symbol we are looking for.
#: ldmain.c:1209 ldmain.c:1211 ldmain.c:1213 ldmain.c:1251 ldmain.c:1299
msgid "warning: "
msgstr "警告:"

#: ldmain.c:1334
msgid "%F%P: bfd_hash_table_init failed: %E\n"
msgstr "%F%P: bfd_hash_table_init 失敗:%E\n"

#: ldmain.c:1341
msgid "%F%P: bfd_hash_lookup failed: %E\n"
msgstr "%F%P: bfd_hash_lookup 失敗:%E\n"

#: ldmain.c:1362
msgid "%X%C: undefined reference to `%T'\n"
msgstr "%X%C: 未定義參考到「%T」\n"

#: ldmain.c:1365
msgid "%C: warning: undefined reference to `%T'\n"
msgstr "%C: 警告:未定義參考到「%T」\n"

#: ldmain.c:1371
msgid "%X%D: more undefined references to `%T' follow\n"
msgstr "%X%D: 跟著更多未定義的參考到「%T」\n"

#: ldmain.c:1374
msgid "%D: warning: more undefined references to `%T' follow\n"
msgstr "%D: 警告:跟著更多未定義的參考到「%T」\n"

#: ldmain.c:1385
msgid "%X%B: undefined reference to `%T'\n"
msgstr "%X%B: 未定義的參考到「%T」\n"

#: ldmain.c:1388
msgid "%B: warning: undefined reference to `%T'\n"
msgstr "%B: 警告:未定義的參考到「%T」\n"

#: ldmain.c:1394
msgid "%X%B: more undefined references to `%T' follow\n"
msgstr "%X%B: 跟著更多未定義的參考到「%T」\n"

#: ldmain.c:1397
msgid "%B: warning: more undefined references to `%T' follow\n"
msgstr "%B: 警告:跟著更多未定義的參考到「%T」\n"

#: ldmain.c:1436
msgid " additional relocation overflows omitted from the output\n"
msgstr "  從輸出所省略的額外重定址溢位\n"

#: ldmain.c:1449
msgid " relocation truncated to fit: %s against undefined symbol `%T'"
msgstr "  截斷重定址至相符:%s 針對未定義的符號「%T」"

#: ldmain.c:1454
msgid " relocation truncated to fit: %s against symbol `%T' defined in %A section in %B"
msgstr "  截斷重定址至相符:%s 針對在 %B 中的 %A 區段中的符號「%T」的定義"

#: ldmain.c:1466
msgid " relocation truncated to fit: %s against `%T'"
msgstr "  截斷重定址至相符:%s 針對「%T」"

#: ldmain.c:1483
#, c-format
msgid "%X%C: dangerous relocation: %s\n"
msgstr "%X%C: 危險的重定址:%s\n"

#: ldmain.c:1498
msgid "%X%C: reloc refers to symbol `%T' which is not being output\n"
msgstr "%X%C: 重定址參考未被輸出的符號「%T」\n"

#: ldmisc.c:147
#, c-format
msgid "no symbol"
msgstr "無符號"

#: ldmisc.c:238
#, c-format
msgid "built in linker script:%u"
msgstr "內建鏈結命令稿:%u"

#: ldmisc.c:294 ldmisc.c:298
msgid "%B%F: could not read symbols\n"
msgstr "%B%F:無法讀取符號\n"

#: ldmisc.c:340
msgid "%B: In function `%T'"
msgstr "%B:在函式「%T」中"

#: ldmisc.c:510
msgid "%F%P: internal error %s %d\n"
msgstr "%F%P:內部錯誤 %s %d\n"

#: ldmisc.c:556
msgid "%P: internal error: aborting at %s line %d in %s\n"
msgstr "%P: 內部錯誤:放棄 %3$s 中 %1$s 的第 %2$d 列\n"

#: ldmisc.c:559
msgid "%P: internal error: aborting at %s line %d\n"
msgstr "%P: 內部錯誤:放棄 %s 的第 %d 列\n"

#: ldmisc.c:561
msgid "%P%F: please report this bug\n"
msgstr "%P%F:請報告此錯誤\n"

#. Output for noisy == 2 is intended to follow the GNU standards.
#: ldver.c:38
#, c-format
msgid "GNU ld version %s\n"
msgstr "GNU ld 版本 %s\n"

#: ldver.c:42
#, c-format
msgid "Copyright 2005 Free Software Foundation, Inc.\n"
msgstr "版權所有 2005 自由軟體基金會\n"

#: ldver.c:43
#, c-format
msgid ""
"This program is free software; you may redistribute it under the terms of\n"
"the GNU General Public License.  This program has absolutely no warranty.\n"
msgstr ""
"本程式是自由軟體;您可以在遵循 GNU 通用公共許可證的前提下再散佈。\n"
"本程式不含任何擔保。\n"

#: ldver.c:52
#, c-format
msgid "  Supported emulations:\n"
msgstr "  支援的模擬:\n"

#: ldwrite.c:55 ldwrite.c:191
msgid "%P%F: bfd_new_link_order failed\n"
msgstr "%P%F: bfd_new_link_order 時失敗\n"

#: ldwrite.c:344
msgid "%F%P: cannot create split section name for %s\n"
msgstr "%F%P: 無法在 %s 建立分割節段名稱\n"

#: ldwrite.c:356
msgid "%F%P: clone section failed: %E\n"
msgstr "%F%P: 仿製區段失敗: %E\n"

#: ldwrite.c:394
#, c-format
msgid "%8x something else\n"
msgstr "%8x 其他東西\n"

#: ldwrite.c:564
msgid "%F%P: final link failed: %E\n"
msgstr "%F%P: 最後的鏈結失敗: %E\n"

#: lexsup.c:196 lexsup.c:328
msgid "KEYWORD"
msgstr "關鍵字"

#: lexsup.c:196
msgid "Shared library control for HP/UX compatibility"
msgstr "為了 HP/UX 相容性的共用程式庫控制"

#: lexsup.c:199
msgid "ARCH"
msgstr "架構"

#: lexsup.c:199
msgid "Set architecture"
msgstr "設定 CPU 架構"

#: lexsup.c:201 lexsup.c:422
msgid "TARGET"
msgstr "目標"

#: lexsup.c:201
msgid "Specify target for following input files"
msgstr "指定用於下述輸入檔案的目標"

#: lexsup.c:204 lexsup.c:253 lexsup.c:265 lexsup.c:278 lexsup.c:381
#: lexsup.c:434 lexsup.c:491
msgid "FILE"
msgstr "檔案"

#: lexsup.c:204
msgid "Read MRI format linker script"
msgstr "讀取 MRI 格式的鏈結器命令稿"

#: lexsup.c:206
msgid "Force common symbols to be defined"
msgstr "強制公共符號必須定義"

#: lexsup.c:210 lexsup.c:476 lexsup.c:478 lexsup.c:480
msgid "ADDRESS"
msgstr "位址"

#: lexsup.c:210
msgid "Set start address"
msgstr "設定起始位址"

#: lexsup.c:212
msgid "Export all dynamic symbols"
msgstr "匯出所有動態符號"

#: lexsup.c:214
msgid "Link big-endian objects"
msgstr "鏈結高位位元組在前的目的檔案"

#: lexsup.c:216
msgid "Link little-endian objects"
msgstr "鏈結低位位元組在前的目的檔案"

#: lexsup.c:218 lexsup.c:221
msgid "SHLIB"
msgstr "共享函式庫"

#: lexsup.c:218
msgid "Auxiliary filter for shared object symbol table"
msgstr "指定為某共享物件符號表的輔助過濾器"

#: lexsup.c:221
msgid "Filter for shared object symbol table"
msgstr "指定為某共享物件符號表的過濾器"

#: lexsup.c:224
msgid "Ignored"
msgstr "忽略"

#: lexsup.c:226
msgid "SIZE"
msgstr "大小"

#: lexsup.c:226
msgid "Small data size (if no size, same as --shared)"
msgstr "小型資料大小(如果未給予大小,與 --shared 相同)"

#: lexsup.c:229
msgid "FILENAME"
msgstr "檔案名稱"

#: lexsup.c:229
msgid "Set internal name of shared library"
msgstr "設定共享函式庫的內部名稱"

#: lexsup.c:231
msgid "PROGRAM"
msgstr "程式"

#: lexsup.c:231
msgid "Set PROGRAM as the dynamic linker to use"
msgstr "將「程式」設為要使用的動態鏈結器"

#: lexsup.c:234
msgid "LIBNAME"
msgstr "函式庫名稱"

#: lexsup.c:234
msgid "Search for library LIBNAME"
msgstr "搜尋函式庫「函式庫名稱」"

#: lexsup.c:236
msgid "DIRECTORY"
msgstr "目錄"

#: lexsup.c:236
msgid "Add DIRECTORY to library search path"
msgstr "將「目錄」加入到函式庫搜尋路徑中"

#: lexsup.c:239
msgid "Override the default sysroot location"
msgstr "強制覆寫預設的 sysroot 位置"

#: lexsup.c:241
msgid "EMULATION"
msgstr "模擬"

#: lexsup.c:241
msgid "Set emulation"
msgstr "設定模擬"

#: lexsup.c:243
msgid "Print map file on standard output"
msgstr "在標準輸出上列印對應圖檔案"

#: lexsup.c:245
msgid "Do not page align data"
msgstr "不將資料對齊至頁邊界"

#: lexsup.c:247
msgid "Do not page align data, do not make text readonly"
msgstr "不將資料對齊至頁邊界,不將文字設為唯讀"

#: lexsup.c:250
msgid "Page align data, make text readonly"
msgstr "將資料對齊至頁邊界,將文字設為唯讀"

#: lexsup.c:253
msgid "Set output file name"
msgstr "設定輸出檔案名稱"

#: lexsup.c:255
msgid "Optimize output file"
msgstr "最佳化輸出檔案"

#: lexsup.c:257
msgid "Ignored for SVR4 compatibility"
msgstr "為 SVR4 相容性所忽略"

#: lexsup.c:261
msgid "Generate relocatable output"
msgstr "產生可重新定位的輸出"

#: lexsup.c:265
msgid "Just link symbols (if directory, same as --rpath)"
msgstr "僅鏈結符號 (如果是目錄,與 --rpath 相同)"

#: lexsup.c:268
msgid "Strip all symbols"
msgstr "剔除所有符號資訊"

#: lexsup.c:270
msgid "Strip debugging symbols"
msgstr "剔除除錯符號資訊"

#: lexsup.c:272
msgid "Strip symbols in discarded sections"
msgstr "剔除在丟棄區段中的符號"

#: lexsup.c:274
msgid "Do not strip symbols in discarded sections"
msgstr "不剔除在丟棄區段中的符號"

#: lexsup.c:276
msgid "Trace file opens"
msgstr "追蹤檔案開啟"

#: lexsup.c:278
msgid "Read linker script"
msgstr "讀取鏈結器命令稿"

#: lexsup.c:280 lexsup.c:298 lexsup.c:364 lexsup.c:379 lexsup.c:469
#: lexsup.c:494 lexsup.c:521
msgid "SYMBOL"
msgstr "符號"

#: lexsup.c:280
msgid "Start with undefined reference to SYMBOL"
msgstr "以未定義的符號參考開始"

#: lexsup.c:283
msgid "[=SECTION]"
msgstr "[=區段]"

#: lexsup.c:284
msgid "Don't merge input [SECTION | orphan] sections"
msgstr "不合併名稱為「區段」的輸入區段或孤立區段"

#: lexsup.c:286
msgid "Build global constructor/destructor tables"
msgstr "組建全域建構子/解構式表格"

#: lexsup.c:288
msgid "Print version information"
msgstr "顯示版本資訊"

#: lexsup.c:290
msgid "Print version and emulation information"
msgstr "顯示版本和模擬資訊"

#: lexsup.c:292
msgid "Discard all local symbols"
msgstr "丟棄所有局部符號"

#: lexsup.c:294
msgid "Discard temporary local symbols (default)"
msgstr "丟棄臨時局部符號(預設)"

#: lexsup.c:296
msgid "Don't discard any local symbols"
msgstr "不丟棄任何局部符號"

#: lexsup.c:298
msgid "Trace mentions of SYMBOL"
msgstr "符號的追蹤表記"

#: lexsup.c:300 lexsup.c:436 lexsup.c:438
msgid "PATH"
msgstr "路徑"

#: lexsup.c:300
msgid "Default search path for Solaris compatibility"
msgstr "為了 Solaris 相容性的預設搜尋路徑"

#: lexsup.c:303
msgid "Start a group"
msgstr "開始群組"

#: lexsup.c:305
msgid "End a group"
msgstr "結束群組"

#: lexsup.c:309
msgid "Accept input files whose architecture cannot be determined"
msgstr "接受無法決定其架構的輸入檔案"

#: lexsup.c:313
msgid "Reject input files whose architecture is unknown"
msgstr "拒絕架構不明的輸入檔案"

#: lexsup.c:316
msgid ""
"Set DT_NEEDED tags for DT_NEEDED entries in\n"
"\t\t\t\tfollowing dynamic libs"
msgstr ""
"設定 DT_NEEDED 的標記用於 DT_NEEDED 所需的項目在\n"
"\t\t\t\t下述的動態函式庫中"

#: lexsup.c:319
msgid ""
"Do not set DT_NEEDED tags for DT_NEEDED entries\n"
"\t\t\t\tin following dynamic libs"
msgstr ""
"不設定 DT_NEEDED 的標記用於 DT_NEEDED 所需的項目\n"
"\t\t\t\t在下述的動態函式庫中"

#: lexsup.c:322
msgid "Only set DT_NEEDED for following dynamic libs if used"
msgstr "如果使用的話,只有設定 DT_NEEDED 於下述的動態函式庫"

#: lexsup.c:325
msgid "Always set DT_NEEDED for following dynamic libs"
msgstr "自動設定 DTNEEDED 用於下述的動態函式庫"

#: lexsup.c:328
msgid "Ignored for SunOS compatibility"
msgstr "為 SunOS 相容性所忽略"

#: lexsup.c:330
msgid "Link against shared libraries"
msgstr "鏈結到共享函式庫"

#: lexsup.c:336
msgid "Do not link against shared libraries"
msgstr "不鏈結到共享函式庫"

#: lexsup.c:344
msgid "Bind global references locally"
msgstr "局部地繫結全域參考"

#: lexsup.c:346
msgid "Check section addresses for overlaps (default)"
msgstr "檢查區段位址是否重疊(預設)"

#: lexsup.c:349
msgid "Do not check section addresses for overlaps"
msgstr "不檢查區段位址是否重疊"

#: lexsup.c:352
msgid "Output cross reference table"
msgstr "輸出交叉參照表"

#: lexsup.c:354
msgid "SYMBOL=EXPRESSION"
msgstr "符號=運算式"

#: lexsup.c:354
msgid "Define a symbol"
msgstr "定義一個符號"

#: lexsup.c:356
msgid "[=STYLE]"
msgstr "[=樣式]"

#: lexsup.c:356
msgid "Demangle symbol names [using STYLE]"
msgstr "解讀符號名稱[使用「樣式」]"

#: lexsup.c:359
msgid "Generate embedded relocs"
msgstr "產生嵌入式重定址"

#: lexsup.c:361
msgid "Treat warnings as errors"
msgstr "將警告當作錯誤"

#: lexsup.c:364
msgid "Call SYMBOL at unload-time"
msgstr "在卸載時間呼叫符號"

#: lexsup.c:366
msgid "Force generation of file with .exe suffix"
msgstr "強制為產生的檔案加入 .exe 字尾"

#: lexsup.c:368
msgid "Remove unused sections (on some targets)"
msgstr "移除未使用的區段(於某些目標)"

#: lexsup.c:371
msgid "Don't remove unused sections (default)"
msgstr "不移除未使用的區段(預設)"

#: lexsup.c:374
msgid "Set default hash table size close to <NUMBER>"
msgstr "設定預設雜湊表大小接近 <數字>"

#: lexsup.c:377
msgid "Print option help"
msgstr "顯示選項求助"

#: lexsup.c:379
msgid "Call SYMBOL at load-time"
msgstr "在載入時間呼叫符號"

#: lexsup.c:381
msgid "Write a map file"
msgstr "寫入對應檔案"

#: lexsup.c:383
msgid "Do not define Common storage"
msgstr "不定義公共儲藏"

#: lexsup.c:385
msgid "Do not demangle symbol names"
msgstr "不解讀符號名稱"

#: lexsup.c:387
msgid "Use less memory and more disk I/O"
msgstr "使用較少的記憶體和更多磁碟 I/O"

#: lexsup.c:389
msgid "Do not allow unresolved references in object files"
msgstr "不允許在目的檔案中存在無法解析的參考"

#: lexsup.c:392
msgid "Allow unresolved references in shared libaries"
msgstr "允許在共享函式庫中存在無法解析的參考"

#: lexsup.c:396
msgid "Do not allow unresolved references in shared libs"
msgstr "不允許在共享函式庫中存在無法解析的參考"

#: lexsup.c:400
msgid "Allow multiple definitions"
msgstr "允許多重定義"

#: lexsup.c:402
msgid "Disallow undefined version"
msgstr "不允許未定義的版本"

#: lexsup.c:404
msgid "Create default symbol version"
msgstr "建立預設符號版本"

#: lexsup.c:407
msgid "Create default symbol version for imported symbols"
msgstr "建立用於匯入符號的預設符號版本"

#: lexsup.c:410
msgid "Don't warn about mismatched input files"
msgstr "不為不符合的輸入檔案發出警告"

#: lexsup.c:412
msgid "Turn off --whole-archive"
msgstr "關閉 --whole-archive"

#: lexsup.c:414
msgid "Create an output file even if errors occur"
msgstr "即使發生錯誤也要建立輸出檔案"

#: lexsup.c:419
msgid ""
"Only use library directories specified on\n"
"\t\t\t\tthe command line"
msgstr ""
"只使用命令列中給予的\n"
"\t\t\t\t函式庫目錄"

#: lexsup.c:422
msgid "Specify target of output file"
msgstr "指定輸出的目標檔案"

#: lexsup.c:425
msgid "Ignored for Linux compatibility"
msgstr "為 Linux 相容性所忽略"

#: lexsup.c:428
msgid "Reduce memory overheads, possibly taking much longer"
msgstr "降低記憶體額外負擔,可能會花費更多時間"

#: lexsup.c:431
msgid "Relax branches on certain targets"
msgstr "放寬分支於某些目標"

#: lexsup.c:434
msgid "Keep only symbols listed in FILE"
msgstr "只保留在「檔案」中列出的符號"

#: lexsup.c:436
msgid "Set runtime shared library search path"
msgstr "設定執行時共享函式庫的搜尋路徑"

#: lexsup.c:438
msgid "Set link time shared library search path"
msgstr "設定鏈結時共享函式庫的搜尋路徑"

#: lexsup.c:441
msgid "Create a shared library"
msgstr "建立共享函式庫"

#: lexsup.c:445
msgid "Create a position independent executable"
msgstr "建立位置無關的可執行檔案"

#: lexsup.c:449
msgid "Sort common symbols by size"
msgstr "按大小排序公用符號清單"

#: lexsup.c:453
msgid "name|alignment"
msgstr "名稱|對齊"

#: lexsup.c:454
msgid "Sort sections by name or maximum alignment"
msgstr "依名稱或最大值對齊來排序區段"

#: lexsup.c:456
msgid "COUNT"
msgstr "計數"

#: lexsup.c:456
msgid "How many tags to reserve in .dynamic section"
msgstr "有多少標記要保留在 .dynamic 區段中"

#: lexsup.c:459
msgid "[=SIZE]"
msgstr "[=大小]"

#: lexsup.c:459
msgid "Split output sections every SIZE octets"
msgstr "依每[大小]八位元組來分割輸出區段"

#: lexsup.c:462
msgid "[=COUNT]"
msgstr "[=計數]"

#: lexsup.c:462
msgid "Split output sections every COUNT relocs"
msgstr "依每[計數]重定址來分割輸出區段"

#: lexsup.c:465
msgid "Print memory usage statistics"
msgstr "顯示記憶體使用統計"

#: lexsup.c:467
msgid "Display target specific options"
msgstr "顯示目標特定的選項"

#: lexsup.c:469
msgid "Do task level linking"
msgstr "執行工作等級鏈結"

#: lexsup.c:471
msgid "Use same format as native linker"
msgstr "使用與原生鏈結器相同的格式"

#: lexsup.c:473
msgid "SECTION=ADDRESS"
msgstr "區段=位址"

#: lexsup.c:473
msgid "Set address of named section"
msgstr "設定具名區段的位址"

#: lexsup.c:476
msgid "Set address of .bss section"
msgstr "設定 .bss 區段的位址"

#: lexsup.c:478
msgid "Set address of .data section"
msgstr "設定 .data 區段的位址"

#: lexsup.c:480
msgid "Set address of .text section"
msgstr "設定 .text 區段的位址"

#: lexsup.c:483
msgid ""
"How to handle unresolved symbols.  <method> is:\n"
"\t\t\t\tignore-all, report-all, ignore-in-object-files,\n"
"\t\t\t\tignore-in-shared-libs"
msgstr ""
"如何處理不能解析的符號。<方法> 是:\n"
"\t\t\t\t全部忽略、全部回報、在目的檔中忽略、\n"
"\t\t\t\t在共享函式庫中忽略"

#: lexsup.c:487
msgid "Output lots of information during link"
msgstr "鏈結過程中輸出大量相關資訊"

#: lexsup.c:491
msgid "Read version information script"
msgstr "讀取版本資訊命令稿"

#: lexsup.c:494
msgid ""
"Take export symbols list from .exports, using\n"
"\t\t\t\tSYMBOL as the version."
msgstr ""
"從 .exports 匯出符號表列,使用\n"
"\t\t\t\t[符號]做為版本。"

#: lexsup.c:497
msgid "Warn about duplicate common symbols"
msgstr "為重複的公共符號給予警告"

#: lexsup.c:499
msgid "Warn if global constructors/destructors are seen"
msgstr "如果看得見全域建構子/解構式就給予警告"

#: lexsup.c:502
msgid "Warn if the multiple GP values are used"
msgstr "如果使用了多重 GP 值就給予警告"

#: lexsup.c:504
msgid "Warn only once per undefined symbol"
msgstr "為每一個未定義的符號只警告一次"

#: lexsup.c:506
msgid "Warn if start of section changes due to alignment"
msgstr "如果區段的開始由於對齊而變更就給予警告"

#: lexsup.c:509
msgid "Warn if shared object has DT_TEXTREL"
msgstr "如果共用物件有 DT_TEXTREL 就給予警告"

#: lexsup.c:513
msgid "Report unresolved symbols as warnings"
msgstr "將無法解析的符號視作警告"

#: lexsup.c:516
msgid "Report unresolved symbols as errors"
msgstr "將無法解析的符號視作錯誤"

#: lexsup.c:518
msgid "Include all objects from following archives"
msgstr "包含下述檔案中的所有物件"

#: lexsup.c:521
msgid "Use wrapper functions for SYMBOL"
msgstr "使用包裝函式做為[符號]"

#: lexsup.c:668
msgid "%P: unrecognized option '%s'\n"
msgstr "%P:無法辨識的選項「%s」\n"

#: lexsup.c:670
msgid "%P%F: use the --help option for usage information\n"
msgstr "%P%F:使用 --help 選項以獲取使用資訊\n"

#: lexsup.c:688
msgid "%P%F: unrecognized -a option `%s'\n"
msgstr "%P%F:無法辨識的 -a 選項「%s」\n"

#: lexsup.c:701
msgid "%P%F: unrecognized -assert option `%s'\n"
msgstr "%P%F:無法辨識的 -assert 選項「%s」\n"

#: lexsup.c:744
msgid "%F%P: unknown demangling style `%s'"
msgstr "%F%P: 不明的解讀樣式「%s」"

#: lexsup.c:806
msgid "%P%F: invalid number `%s'\n"
msgstr "%P%F: 無效的數字「%s」\n"

#: lexsup.c:898
msgid "%P%F: bad --unresolved-symbols option: %s\n"
msgstr "%P%F: 不當的 --unresolved-symbols 選項: %s\n"

#. This can happen if the user put "-rpath,a" on the command
#. line.  (Or something similar.  The comma is important).
#. Getopt becomes confused and thinks that this is a -r option
#. but it cannot parse the text after the -r so it refuses to
#. increment the optind counter.  Detect this case and issue
#. an error message here.  We cannot just make this a warning,
#. increment optind, and continue because getopt is too confused
#. and will seg-fault the next time around.
#: lexsup.c:969
msgid "%P%F: bad -rpath option\n"
msgstr "%P%F: 不當的 -rpath 選項\n"

#: lexsup.c:1081
msgid "%P%F: -shared not supported\n"
msgstr "%P%F:不支援 -shared\n"

#: lexsup.c:1090
msgid "%P%F: -pie not supported\n"
msgstr "%P%F:不支援 -pie\n"

#: lexsup.c:1100
msgid "name"
msgstr "名稱"

#: lexsup.c:1102
msgid "alignment"
msgstr "對齊"

#: lexsup.c:1105
msgid "%P%F: invalid section sorting option: %s\n"
msgstr "%P%F: 無效的區段排序選項: %s\n"

#: lexsup.c:1131
msgid "%P%F: invalid argument to option \"--section-start\"\n"
msgstr "%P%F:給予選項「--section-start」的引數無效\n"

#: lexsup.c:1138
msgid "%P%F: missing argument(s) to option \"--section-start\"\n"
msgstr "%P%F:選項「--section-start」缺少引數\n"

#: lexsup.c:1312
msgid "%P%F: may not nest groups (--help for usage)\n"
msgstr "%P%F: 不可巢狀群組 (--help 獲得用法)\n"

#: lexsup.c:1319
msgid "%P%F: group ended before it began (--help for usage)\n"
msgstr "%P%F: 群組在它開始之前就結束 (--help 獲得用法)\n"

#: lexsup.c:1347
msgid "%P%X: --hash-size needs a numeric argument\n"
msgstr "%P%X: --hash-size 需要數值引數\n"

#: lexsup.c:1398 lexsup.c:1411
msgid "%P%F: invalid hex number `%s'\n"
msgstr "%P%F: 無效的十六進位數字「%s」\n"

#: lexsup.c:1447
#, c-format
msgid "Usage: %s [options] file...\n"
msgstr "用法:%s [選項] 檔案…\n"

#: lexsup.c:1449
#, c-format
msgid "Options:\n"
msgstr "選項:\n"

#: lexsup.c:1527
#, c-format
msgid "  @FILE"
msgstr "  @檔案"

#: lexsup.c:1530
#, c-format
msgid "Read options from FILE\n"
msgstr "從[檔案]讀取選項\n"

#. Note: Various tools (such as libtool) depend upon the
#. format of the listings below - do not change them.
#: lexsup.c:1535
#, c-format
msgid "%s: supported targets:"
msgstr "%s: 支援的目標:"

#: lexsup.c:1543
#, c-format
msgid "%s: supported emulations: "
msgstr "%s:支援的模擬:"

#: lexsup.c:1548
#, c-format
msgid "%s: emulation specific options:\n"
msgstr "%s:模擬特定選項:\n"

#: lexsup.c:1552
#, c-format
msgid "Report bugs to %s\n"
msgstr "向 %s 報告程式錯誤\n"

#: mri.c:291
msgid "%P%F: unknown format type %s\n"
msgstr "%P%F:不明的格式類型 %s\n"

#: pe-dll.c:303
#, c-format
msgid "%XUnsupported PEI architecture: %s\n"
msgstr "%X 不支援的 PEI 架構:%s\n"

#: pe-dll.c:604
#, c-format
msgid "%XCannot export %s: invalid export name\n"
msgstr "%X 不能匯出 %s:無效的匯出名稱\n"

#: pe-dll.c:657
#, c-format
msgid "%XError, duplicate EXPORT with ordinals: %s (%d vs %d)\n"
msgstr "%X 錯誤,重製[匯出]以序數: %s(%d 相對 %d)\n"

#: pe-dll.c:664
#, c-format
msgid "Warning, duplicate EXPORT: %s\n"
msgstr "警告,重製[匯出]: %s\n"

#: pe-dll.c:751
#, c-format
msgid "%XCannot export %s: symbol not defined\n"
msgstr "%X 不能匯出 %s:符號未定義\n"

#: pe-dll.c:757
#, c-format
msgid "%XCannot export %s: symbol wrong type (%d vs %d)\n"
msgstr "%X 無法匯出 %s: 符號錯誤型態 (%d 相對 %d)\n"

#: pe-dll.c:764
#, c-format
msgid "%XCannot export %s: symbol not found\n"
msgstr "%X 不能匯出 %s:找不到符號\n"

#: pe-dll.c:877
#, c-format
msgid "%XError, ordinal used twice: %d (%s vs %s)\n"
msgstr "%X 錯誤,序數使用兩次: %d(%s 相對 %s)\n"

#: pe-dll.c:1219
#, c-format
msgid "%XError: %d-bit reloc in dll\n"
msgstr "%X 錯誤:在 DLL 中 %d-位元重定址\n"

#: pe-dll.c:1347
#, c-format
msgid "%s: Can't open output def file %s\n"
msgstr "%s:無法開啟輸出 def 檔案 %s\n"

#: pe-dll.c:1490
#, c-format
msgid "; no contents available\n"
msgstr ";沒有可用的內容\n"

#: pe-dll.c:2252
msgid "%C: variable '%T' can't be auto-imported. Please read the documentation for ld's --enable-auto-import for details.\n"
msgstr "%C:變數「%T」無法自動匯入。請讀取與 ld 的 --enable-auto-import 相關文件以獲取更詳細的資訊。\n"

#: pe-dll.c:2282
#, c-format
msgid "%XCan't open .lib file: %s\n"
msgstr "%X 無法開啟 .lib 檔案:%s\n"

#: pe-dll.c:2287
#, c-format
msgid "Creating library file: %s\n"
msgstr "正在建立函式庫檔案:%s\n"

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.