URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.2.2/] [gcc/] [caller-save.c] - Rev 307
Go to most recent revision | Compare with Previous | Blame | View Log
/* Save and restore call-clobbered registers which are live across a call. Copyright (C) 1989, 1992, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007 Free Software Foundation, Inc. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "rtl.h" #include "regs.h" #include "insn-config.h" #include "flags.h" #include "hard-reg-set.h" #include "recog.h" #include "basic-block.h" #include "reload.h" #include "function.h" #include "expr.h" #include "toplev.h" #include "tm_p.h" #include "addresses.h" #ifndef MAX_MOVE_MAX #define MAX_MOVE_MAX MOVE_MAX #endif #ifndef MIN_UNITS_PER_WORD #define MIN_UNITS_PER_WORD UNITS_PER_WORD #endif #define MOVE_MAX_WORDS (MOVE_MAX / UNITS_PER_WORD) /* Modes for each hard register that we can save. The smallest mode is wide enough to save the entire contents of the register. When saving the register because it is live we first try to save in multi-register modes. If that is not possible the save is done one register at a time. */ static enum machine_mode regno_save_mode[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1]; /* For each hard register, a place on the stack where it can be saved, if needed. */ static rtx regno_save_mem[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1]; /* We will only make a register eligible for caller-save if it can be saved in its widest mode with a simple SET insn as long as the memory address is valid. We record the INSN_CODE is those insns here since when we emit them, the addresses might not be valid, so they might not be recognized. */ static int reg_save_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE]; static int reg_restore_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE]; /* Set of hard regs currently residing in save area (during insn scan). */ static HARD_REG_SET hard_regs_saved; /* Number of registers currently in hard_regs_saved. */ static int n_regs_saved; /* Computed by mark_referenced_regs, all regs referenced in a given insn. */ static HARD_REG_SET referenced_regs; static void mark_set_regs (rtx, rtx, void *); static void mark_referenced_regs (rtx); static int insert_save (struct insn_chain *, int, int, HARD_REG_SET *, enum machine_mode *); static int insert_restore (struct insn_chain *, int, int, int, enum machine_mode *); static struct insn_chain *insert_one_insn (struct insn_chain *, int, int, rtx); static void add_stored_regs (rtx, rtx, void *); /* Initialize for caller-save. Look at all the hard registers that are used by a call and for which regclass.c has not already excluded from being used across a call. Ensure that we can find a mode to save the register and that there is a simple insn to save and restore the register. This latter check avoids problems that would occur if we tried to save the MQ register of some machines directly into memory. */ void init_caller_save (void) { rtx addr_reg; int offset; rtx address; int i, j; enum machine_mode mode; rtx savepat, restpat; rtx test_reg, test_mem; rtx saveinsn, restinsn; /* First find all the registers that we need to deal with and all the modes that they can have. If we can't find a mode to use, we can't have the register live over calls. */ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) { if (call_used_regs[i] && ! call_fixed_regs[i]) { for (j = 1; j <= MOVE_MAX_WORDS; j++) { regno_save_mode[i][j] = HARD_REGNO_CALLER_SAVE_MODE (i, j, VOIDmode); if (regno_save_mode[i][j] == VOIDmode && j == 1) { call_fixed_regs[i] = 1; SET_HARD_REG_BIT (call_fixed_reg_set, i); } } } else regno_save_mode[i][1] = VOIDmode; } /* The following code tries to approximate the conditions under which we can easily save and restore a register without scratch registers or other complexities. It will usually work, except under conditions where the validity of an insn operand is dependent on the address offset. No such cases are currently known. We first find a typical offset from some BASE_REG_CLASS register. This address is chosen by finding the first register in the class and by finding the smallest power of two that is a valid offset from that register in every mode we will use to save registers. */ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) if (TEST_HARD_REG_BIT (reg_class_contents [(int) base_reg_class (regno_save_mode [i][1], PLUS, CONST_INT)], i)) break; gcc_assert (i < FIRST_PSEUDO_REGISTER); addr_reg = gen_rtx_REG (Pmode, i); for (offset = 1 << (HOST_BITS_PER_INT / 2); offset; offset >>= 1) { address = gen_rtx_PLUS (Pmode, addr_reg, GEN_INT (offset)); for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) if (regno_save_mode[i][1] != VOIDmode && ! strict_memory_address_p (regno_save_mode[i][1], address)) break; if (i == FIRST_PSEUDO_REGISTER) break; } /* If we didn't find a valid address, we must use register indirect. */ if (offset == 0) address = addr_reg; /* Next we try to form an insn to save and restore the register. We see if such an insn is recognized and meets its constraints. To avoid lots of unnecessary RTL allocation, we construct all the RTL once, then modify the memory and register operands in-place. */ test_reg = gen_rtx_REG (VOIDmode, 0); test_mem = gen_rtx_MEM (VOIDmode, address); savepat = gen_rtx_SET (VOIDmode, test_mem, test_reg); restpat = gen_rtx_SET (VOIDmode, test_reg, test_mem); saveinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, 0, 0, savepat, -1, 0, 0); restinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, 0, 0, restpat, -1, 0, 0); for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) for (mode = 0 ; mode < MAX_MACHINE_MODE; mode++) if (HARD_REGNO_MODE_OK (i, mode)) { int ok; /* Update the register number and modes of the register and memory operand. */ REGNO (test_reg) = i; PUT_MODE (test_reg, mode); PUT_MODE (test_mem, mode); /* Force re-recognition of the modified insns. */ INSN_CODE (saveinsn) = -1; INSN_CODE (restinsn) = -1; reg_save_code[i][mode] = recog_memoized (saveinsn); reg_restore_code[i][mode] = recog_memoized (restinsn); /* Now extract both insns and see if we can meet their constraints. */ ok = (reg_save_code[i][mode] != -1 && reg_restore_code[i][mode] != -1); if (ok) { extract_insn (saveinsn); ok = constrain_operands (1); extract_insn (restinsn); ok &= constrain_operands (1); } if (! ok) { reg_save_code[i][mode] = -1; reg_restore_code[i][mode] = -1; } } else { reg_save_code[i][mode] = -1; reg_restore_code[i][mode] = -1; } for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) for (j = 1; j <= MOVE_MAX_WORDS; j++) if (reg_save_code [i][regno_save_mode[i][j]] == -1) { regno_save_mode[i][j] = VOIDmode; if (j == 1) { call_fixed_regs[i] = 1; SET_HARD_REG_BIT (call_fixed_reg_set, i); } } } /* Initialize save areas by showing that we haven't allocated any yet. */ void init_save_areas (void) { int i, j; for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) for (j = 1; j <= MOVE_MAX_WORDS; j++) regno_save_mem[i][j] = 0; } /* Allocate save areas for any hard registers that might need saving. We take a conservative approach here and look for call-clobbered hard registers that are assigned to pseudos that cross calls. This may overestimate slightly (especially if some of these registers are later used as spill registers), but it should not be significant. Future work: In the fallback case we should iterate backwards across all possible modes for the save, choosing the largest available one instead of falling back to the smallest mode immediately. (eg TF -> DF -> SF). We do not try to use "move multiple" instructions that exist on some machines (such as the 68k moveml). It could be a win to try and use them when possible. The hard part is doing it in a way that is machine independent since they might be saving non-consecutive registers. (imagine caller-saving d0,d1,a0,a1 on the 68k) */ void setup_save_areas (void) { int i, j, k; unsigned int r; HARD_REG_SET hard_regs_used; /* Allocate space in the save area for the largest multi-register pseudos first, then work backwards to single register pseudos. */ /* Find and record all call-used hard-registers in this function. */ CLEAR_HARD_REG_SET (hard_regs_used); for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++) if (reg_renumber[i] >= 0 && REG_N_CALLS_CROSSED (i) > 0) { unsigned int regno = reg_renumber[i]; unsigned int endregno = regno + hard_regno_nregs[regno][GET_MODE (regno_reg_rtx[i])]; for (r = regno; r < endregno; r++) if (call_used_regs[r]) SET_HARD_REG_BIT (hard_regs_used, r); } /* Now run through all the call-used hard-registers and allocate space for them in the caller-save area. Try to allocate space in a manner which allows multi-register saves/restores to be done. */ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) for (j = MOVE_MAX_WORDS; j > 0; j--) { int do_save = 1; /* If no mode exists for this size, try another. Also break out if we have already saved this hard register. */ if (regno_save_mode[i][j] == VOIDmode || regno_save_mem[i][1] != 0) continue; /* See if any register in this group has been saved. */ for (k = 0; k < j; k++) if (regno_save_mem[i + k][1]) { do_save = 0; break; } if (! do_save) continue; for (k = 0; k < j; k++) if (! TEST_HARD_REG_BIT (hard_regs_used, i + k)) { do_save = 0; break; } if (! do_save) continue; /* We have found an acceptable mode to store in. */ regno_save_mem[i][j] = assign_stack_local (regno_save_mode[i][j], GET_MODE_SIZE (regno_save_mode[i][j]), 0); /* Setup single word save area just in case... */ for (k = 0; k < j; k++) /* This should not depend on WORDS_BIG_ENDIAN. The order of words in regs is the same as in memory. */ regno_save_mem[i + k][1] = adjust_address_nv (regno_save_mem[i][j], regno_save_mode[i + k][1], k * UNITS_PER_WORD); } /* Now loop again and set the alias set of any save areas we made to the alias set used to represent frame objects. */ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) for (j = MOVE_MAX_WORDS; j > 0; j--) if (regno_save_mem[i][j] != 0) set_mem_alias_set (regno_save_mem[i][j], get_frame_alias_set ()); } /* Find the places where hard regs are live across calls and save them. */ void save_call_clobbered_regs (void) { struct insn_chain *chain, *next; enum machine_mode save_mode [FIRST_PSEUDO_REGISTER]; /* Computed in mark_set_regs, holds all registers set by the current instruction. */ HARD_REG_SET this_insn_sets; CLEAR_HARD_REG_SET (hard_regs_saved); n_regs_saved = 0; for (chain = reload_insn_chain; chain != 0; chain = next) { rtx insn = chain->insn; enum rtx_code code = GET_CODE (insn); next = chain->next; gcc_assert (!chain->is_caller_save_insn); if (INSN_P (insn)) { /* If some registers have been saved, see if INSN references any of them. We must restore them before the insn if so. */ if (n_regs_saved) { int regno; if (code == JUMP_INSN) /* Restore all registers if this is a JUMP_INSN. */ COPY_HARD_REG_SET (referenced_regs, hard_regs_saved); else { CLEAR_HARD_REG_SET (referenced_regs); mark_referenced_regs (PATTERN (insn)); AND_HARD_REG_SET (referenced_regs, hard_regs_saved); } for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) if (TEST_HARD_REG_BIT (referenced_regs, regno)) regno += insert_restore (chain, 1, regno, MOVE_MAX_WORDS, save_mode); } if (code == CALL_INSN && ! find_reg_note (insn, REG_NORETURN, NULL)) { unsigned regno; HARD_REG_SET hard_regs_to_save; reg_set_iterator rsi; /* Use the register life information in CHAIN to compute which regs are live during the call. */ REG_SET_TO_HARD_REG_SET (hard_regs_to_save, &chain->live_throughout); /* Save hard registers always in the widest mode available. */ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) if (TEST_HARD_REG_BIT (hard_regs_to_save, regno)) save_mode [regno] = regno_save_mode [regno][1]; else save_mode [regno] = VOIDmode; /* Look through all live pseudos, mark their hard registers and choose proper mode for saving. */ EXECUTE_IF_SET_IN_REG_SET (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno, rsi) { int r = reg_renumber[regno]; int nregs; enum machine_mode mode; gcc_assert (r >= 0); nregs = hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)]; mode = HARD_REGNO_CALLER_SAVE_MODE (r, nregs, PSEUDO_REGNO_MODE (regno)); if (GET_MODE_BITSIZE (mode) > GET_MODE_BITSIZE (save_mode[r])) save_mode[r] = mode; while (nregs-- > 0) SET_HARD_REG_BIT (hard_regs_to_save, r + nregs); } /* Record all registers set in this call insn. These don't need to be saved. N.B. the call insn might set a subreg of a multi-hard-reg pseudo; then the pseudo is considered live during the call, but the subreg that is set isn't. */ CLEAR_HARD_REG_SET (this_insn_sets); note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets); /* Sibcalls are considered to set the return value, compare flow.c:propagate_one_insn. */ if (SIBLING_CALL_P (insn) && current_function_return_rtx) mark_set_regs (current_function_return_rtx, NULL_RTX, &this_insn_sets); /* Compute which hard regs must be saved before this call. */ AND_COMPL_HARD_REG_SET (hard_regs_to_save, call_fixed_reg_set); AND_COMPL_HARD_REG_SET (hard_regs_to_save, this_insn_sets); AND_COMPL_HARD_REG_SET (hard_regs_to_save, hard_regs_saved); AND_HARD_REG_SET (hard_regs_to_save, call_used_reg_set); for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) if (TEST_HARD_REG_BIT (hard_regs_to_save, regno)) regno += insert_save (chain, 1, regno, &hard_regs_to_save, save_mode); /* Must recompute n_regs_saved. */ n_regs_saved = 0; for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) if (TEST_HARD_REG_BIT (hard_regs_saved, regno)) n_regs_saved++; } } if (chain->next == 0 || chain->next->block > chain->block) { int regno; /* At the end of the basic block, we must restore any registers that remain saved. If the last insn in the block is a JUMP_INSN, put the restore before the insn, otherwise, put it after the insn. */ if (n_regs_saved) for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) if (TEST_HARD_REG_BIT (hard_regs_saved, regno)) regno += insert_restore (chain, JUMP_P (insn), regno, MOVE_MAX_WORDS, save_mode); } } } /* Here from note_stores, or directly from save_call_clobbered_regs, when an insn stores a value in a register. Set the proper bit or bits in this_insn_sets. All pseudos that have been assigned hard regs have had their register number changed already, so we can ignore pseudos. */ static void mark_set_regs (rtx reg, rtx setter ATTRIBUTE_UNUSED, void *data) { int regno, endregno, i; enum machine_mode mode = GET_MODE (reg); HARD_REG_SET *this_insn_sets = data; if (GET_CODE (reg) == SUBREG) { rtx inner = SUBREG_REG (reg); if (!REG_P (inner) || REGNO (inner) >= FIRST_PSEUDO_REGISTER) return; regno = subreg_regno (reg); } else if (REG_P (reg) && REGNO (reg) < FIRST_PSEUDO_REGISTER) regno = REGNO (reg); else return; endregno = regno + hard_regno_nregs[regno][mode]; for (i = regno; i < endregno; i++) SET_HARD_REG_BIT (*this_insn_sets, i); } /* Here from note_stores when an insn stores a value in a register. Set the proper bit or bits in the passed regset. All pseudos that have been assigned hard regs have had their register number changed already, so we can ignore pseudos. */ static void add_stored_regs (rtx reg, rtx setter, void *data) { int regno, endregno, i; enum machine_mode mode = GET_MODE (reg); int offset = 0; if (GET_CODE (setter) == CLOBBER) return; if (GET_CODE (reg) == SUBREG && REG_P (SUBREG_REG (reg))) { offset = subreg_regno_offset (REGNO (SUBREG_REG (reg)), GET_MODE (SUBREG_REG (reg)), SUBREG_BYTE (reg), GET_MODE (reg)); reg = SUBREG_REG (reg); } if (!REG_P (reg) || REGNO (reg) >= FIRST_PSEUDO_REGISTER) return; regno = REGNO (reg) + offset; endregno = regno + hard_regno_nregs[regno][mode]; for (i = regno; i < endregno; i++) SET_REGNO_REG_SET ((regset) data, i); } /* Walk X and record all referenced registers in REFERENCED_REGS. */ static void mark_referenced_regs (rtx x) { enum rtx_code code = GET_CODE (x); const char *fmt; int i, j; if (code == SET) mark_referenced_regs (SET_SRC (x)); if (code == SET || code == CLOBBER) { x = SET_DEST (x); code = GET_CODE (x); if ((code == REG && REGNO (x) < FIRST_PSEUDO_REGISTER) || code == PC || code == CC0 || (code == SUBREG && REG_P (SUBREG_REG (x)) && REGNO (SUBREG_REG (x)) < FIRST_PSEUDO_REGISTER /* If we're setting only part of a multi-word register, we shall mark it as referenced, because the words that are not being set should be restored. */ && ((GET_MODE_SIZE (GET_MODE (x)) >= GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))) || (GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))) <= UNITS_PER_WORD)))) return; } if (code == MEM || code == SUBREG) { x = XEXP (x, 0); code = GET_CODE (x); } if (code == REG) { int regno = REGNO (x); int hardregno = (regno < FIRST_PSEUDO_REGISTER ? regno : reg_renumber[regno]); if (hardregno >= 0) { int nregs = hard_regno_nregs[hardregno][GET_MODE (x)]; while (nregs-- > 0) SET_HARD_REG_BIT (referenced_regs, hardregno + nregs); } /* If this is a pseudo that did not get a hard register, scan its memory location, since it might involve the use of another register, which might be saved. */ else if (reg_equiv_mem[regno] != 0) mark_referenced_regs (XEXP (reg_equiv_mem[regno], 0)); else if (reg_equiv_address[regno] != 0) mark_referenced_regs (reg_equiv_address[regno]); return; } fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e') mark_referenced_regs (XEXP (x, i)); else if (fmt[i] == 'E') for (j = XVECLEN (x, i) - 1; j >= 0; j--) mark_referenced_regs (XVECEXP (x, i, j)); } } /* Insert a sequence of insns to restore. Place these insns in front of CHAIN if BEFORE_P is nonzero, behind the insn otherwise. MAXRESTORE is the maximum number of registers which should be restored during this call. It should never be less than 1 since we only work with entire registers. Note that we have verified in init_caller_save that we can do this with a simple SET, so use it. Set INSN_CODE to what we save there since the address might not be valid so the insn might not be recognized. These insns will be reloaded and have register elimination done by find_reload, so we need not worry about that here. Return the extra number of registers saved. */ static int insert_restore (struct insn_chain *chain, int before_p, int regno, int maxrestore, enum machine_mode *save_mode) { int i, k; rtx pat = NULL_RTX; int code; unsigned int numregs = 0; struct insn_chain *new; rtx mem; /* A common failure mode if register status is not correct in the RTL is for this routine to be called with a REGNO we didn't expect to save. That will cause us to write an insn with a (nil) SET_DEST or SET_SRC. Instead of doing so and causing a crash later, check for this common case here instead. This will remove one step in debugging such problems. */ gcc_assert (regno_save_mem[regno][1]); /* Get the pattern to emit and update our status. See if we can restore `maxrestore' registers at once. Work backwards to the single register case. */ for (i = maxrestore; i > 0; i--) { int j; int ok = 1; if (regno_save_mem[regno][i] == 0) continue; for (j = 0; j < i; j++) if (! TEST_HARD_REG_BIT (hard_regs_saved, regno + j)) { ok = 0; break; } /* Must do this one restore at a time. */ if (! ok) continue; numregs = i; break; } mem = regno_save_mem [regno][numregs]; if (save_mode [regno] != VOIDmode && save_mode [regno] != GET_MODE (mem) && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]]) mem = adjust_address (mem, save_mode[regno], 0); else mem = copy_rtx (mem); pat = gen_rtx_SET (VOIDmode, gen_rtx_REG (GET_MODE (mem), regno), mem); code = reg_restore_code[regno][GET_MODE (mem)]; new = insert_one_insn (chain, before_p, code, pat); /* Clear status for all registers we restored. */ for (k = 0; k < i; k++) { CLEAR_HARD_REG_BIT (hard_regs_saved, regno + k); SET_REGNO_REG_SET (&new->dead_or_set, regno + k); n_regs_saved--; } /* Tell our callers how many extra registers we saved/restored. */ return numregs - 1; } /* Like insert_restore above, but save registers instead. */ static int insert_save (struct insn_chain *chain, int before_p, int regno, HARD_REG_SET (*to_save), enum machine_mode *save_mode) { int i; unsigned int k; rtx pat = NULL_RTX; int code; unsigned int numregs = 0; struct insn_chain *new; rtx mem; /* A common failure mode if register status is not correct in the RTL is for this routine to be called with a REGNO we didn't expect to save. That will cause us to write an insn with a (nil) SET_DEST or SET_SRC. Instead of doing so and causing a crash later, check for this common case here. This will remove one step in debugging such problems. */ gcc_assert (regno_save_mem[regno][1]); /* Get the pattern to emit and update our status. See if we can save several registers with a single instruction. Work backwards to the single register case. */ for (i = MOVE_MAX_WORDS; i > 0; i--) { int j; int ok = 1; if (regno_save_mem[regno][i] == 0) continue; for (j = 0; j < i; j++) if (! TEST_HARD_REG_BIT (*to_save, regno + j)) { ok = 0; break; } /* Must do this one save at a time. */ if (! ok) continue; numregs = i; break; } mem = regno_save_mem [regno][numregs]; if (save_mode [regno] != VOIDmode && save_mode [regno] != GET_MODE (mem) && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]]) mem = adjust_address (mem, save_mode[regno], 0); else mem = copy_rtx (mem); pat = gen_rtx_SET (VOIDmode, mem, gen_rtx_REG (GET_MODE (mem), regno)); code = reg_save_code[regno][GET_MODE (mem)]; new = insert_one_insn (chain, before_p, code, pat); /* Set hard_regs_saved and dead_or_set for all the registers we saved. */ for (k = 0; k < numregs; k++) { SET_HARD_REG_BIT (hard_regs_saved, regno + k); SET_REGNO_REG_SET (&new->dead_or_set, regno + k); n_regs_saved++; } /* Tell our callers how many extra registers we saved/restored. */ return numregs - 1; } /* Emit a new caller-save insn and set the code. */ static struct insn_chain * insert_one_insn (struct insn_chain *chain, int before_p, int code, rtx pat) { rtx insn = chain->insn; struct insn_chain *new; #ifdef HAVE_cc0 /* If INSN references CC0, put our insns in front of the insn that sets CC0. This is always safe, since the only way we could be passed an insn that references CC0 is for a restore, and doing a restore earlier isn't a problem. We do, however, assume here that CALL_INSNs don't reference CC0. Guard against non-INSN's like CODE_LABEL. */ if ((NONJUMP_INSN_P (insn) || JUMP_P (insn)) && before_p && reg_referenced_p (cc0_rtx, PATTERN (insn))) chain = chain->prev, insn = chain->insn; #endif new = new_insn_chain (); if (before_p) { rtx link; new->prev = chain->prev; if (new->prev != 0) new->prev->next = new; else reload_insn_chain = new; chain->prev = new; new->next = chain; new->insn = emit_insn_before (pat, insn); /* ??? It would be nice if we could exclude the already / still saved registers from the live sets. */ COPY_REG_SET (&new->live_throughout, &chain->live_throughout); /* Registers that die in CHAIN->INSN still live in the new insn. */ for (link = REG_NOTES (chain->insn); link; link = XEXP (link, 1)) { if (REG_NOTE_KIND (link) == REG_DEAD) { rtx reg = XEXP (link, 0); int regno, i; gcc_assert (REG_P (reg)); regno = REGNO (reg); if (regno >= FIRST_PSEUDO_REGISTER) regno = reg_renumber[regno]; if (regno < 0) continue; for (i = hard_regno_nregs[regno][GET_MODE (reg)] - 1; i >= 0; i--) SET_REGNO_REG_SET (&new->live_throughout, regno + i); } } CLEAR_REG_SET (&new->dead_or_set); if (chain->insn == BB_HEAD (BASIC_BLOCK (chain->block))) BB_HEAD (BASIC_BLOCK (chain->block)) = new->insn; } else { new->next = chain->next; if (new->next != 0) new->next->prev = new; chain->next = new; new->prev = chain; new->insn = emit_insn_after (pat, insn); /* ??? It would be nice if we could exclude the already / still saved registers from the live sets, and observe REG_UNUSED notes. */ COPY_REG_SET (&new->live_throughout, &chain->live_throughout); /* Registers that are set in CHAIN->INSN live in the new insn. (Unless there is a REG_UNUSED note for them, but we don't look for them here.) */ note_stores (PATTERN (chain->insn), add_stored_regs, &new->live_throughout); CLEAR_REG_SET (&new->dead_or_set); if (chain->insn == BB_END (BASIC_BLOCK (chain->block))) BB_END (BASIC_BLOCK (chain->block)) = new->insn; } new->block = chain->block; new->is_caller_save_insn = 1; INSN_CODE (new->insn) = code; return new; }
Go to most recent revision | Compare with Previous | Blame | View Log