URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.2.2/] [gcc/] [config/] [i386/] [gmon-sol2.c] - Rev 247
Go to most recent revision | Compare with Previous | Blame | View Log
/*- * Copyright (c) 1991 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. [rescinded 22 July 1999] * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * This is a modified gmon.c by J.W.Hawtin <oolon@ankh.org>, * 14/8/96 based on the original gmon.c in GCC and the hacked version * solaris 2 sparc version (config/sparc/gmon-sol.c) by Mark Eichin. To do * process profiling on solaris 2.X X86 * * It must be used in conjunction with sol2-gc1.asm, which is used to start * and stop process monitoring. * * Differences. * * On Solaris 2 _mcount is called by library functions not mcount, so support * has been added for both. * * Also the prototype for profil() is different * * Solaris 2 does not seem to have char *minbrk whcih allows the setting of * the minimum SBRK region so this code has been removed and lets pray malloc * does not mess it up. * * Notes * * This code could easily be integrated with the original gmon.c and perhaps * should be. */ #include "tconfig.h" #include "tsystem.h" #include <fcntl.h> /* for creat() */ #ifdef DEBUG #include <stdio.h> #endif static void moncontrol (int); extern void monstartup (char *, char *); extern void _mcleanup (void); extern void internal_mcount (void); struct phdr { char *lpc; char *hpc; int ncnt; }; #define HISTFRACTION 2 #define HISTCOUNTER unsigned short #define HASHFRACTION 1 #define ARCDENSITY 2 #define MINARCS 50 #define BASEADDRESS 0x8000000 /* On Solaris 2 X86 all executables start here and not at 0 */ struct tostruct { char *selfpc; long count; unsigned short link; }; struct rawarc { unsigned long raw_frompc; unsigned long raw_selfpc; long raw_count; }; #define ROUNDDOWN(x,y) (((x)/(y))*(y)) #define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y)) /* char *minbrk; */ /* * froms is actually a bunch of unsigned shorts indexing tos */ static int profiling = 3; static unsigned short *froms; static struct tostruct *tos = 0; static long tolimit = 0; static char *s_lowpc = 0; static char *s_highpc = 0; static unsigned long s_textsize = 0; static int ssiz; static char *sbuf; static int s_scale; /* see profil(2) where this is describe (incorrectly) */ #define SCALE_1_TO_1 0x10000L #define MSG "No space for profiling buffer(s)\n" extern int errno; void monstartup(char *lowpc, char *highpc) { int monsize; char *buffer; register int o; /* * round lowpc and highpc to multiples of the density we're using * so the rest of the scaling (here and in gprof) stays in ints. */ lowpc = (char *) ROUNDDOWN((unsigned long)lowpc, HISTFRACTION*sizeof(HISTCOUNTER)); s_lowpc = lowpc; highpc = (char *) ROUNDUP((unsigned long)highpc, HISTFRACTION*sizeof(HISTCOUNTER)); s_highpc = highpc; s_textsize = highpc - lowpc; monsize = (s_textsize / HISTFRACTION) + sizeof(struct phdr); buffer = (char *) sbrk( monsize ); if ( buffer == (char *) -1 ) { write( 2 , MSG , sizeof(MSG) ); return; } froms = (unsigned short *) sbrk( s_textsize / HASHFRACTION ); if ( froms == (unsigned short *) -1 ) { write( 2 , MSG , sizeof(MSG) ); froms = 0; return; } tolimit = s_textsize * ARCDENSITY / 100; if ( tolimit < MINARCS ) { tolimit = MINARCS; } else if ( tolimit > 65534 ) { tolimit = 65534; } tos = (struct tostruct *) sbrk( tolimit * sizeof( struct tostruct ) ); if ( tos == (struct tostruct *) -1 ) { write( 2 , MSG , sizeof(MSG) ); froms = 0; tos = 0; return; } /* minbrk = (char *) sbrk(0);*/ tos[0].link = 0; sbuf = buffer; ssiz = monsize; ( (struct phdr *) buffer ) -> lpc = lowpc; ( (struct phdr *) buffer ) -> hpc = highpc; ( (struct phdr *) buffer ) -> ncnt = ssiz; monsize -= sizeof(struct phdr); if ( monsize <= 0 ) return; o = highpc - lowpc; if( monsize < o ) #ifndef hp300 s_scale = ( (float) monsize / o ) * SCALE_1_TO_1; #else /* avoid floating point */ { int quot = o / monsize; if (quot >= 0x10000) s_scale = 1; else if (quot >= 0x100) s_scale = 0x10000 / quot; else if (o >= 0x800000) s_scale = 0x1000000 / (o / (monsize >> 8)); else s_scale = 0x1000000 / ((o << 8) / monsize); } #endif else s_scale = SCALE_1_TO_1; moncontrol(1); } void _mcleanup (void) { int fd; int fromindex; int endfrom; char *frompc; int toindex; struct rawarc rawarc; moncontrol(0); fd = creat( "gmon.out" , 0666 ); if ( fd < 0 ) { perror( "mcount: gmon.out" ); return; } # ifdef DEBUG fprintf( stderr , "[mcleanup] sbuf 0x%x ssiz %d\n" , sbuf , ssiz ); # endif /* DEBUG */ write( fd , sbuf , ssiz ); endfrom = s_textsize / (HASHFRACTION * sizeof(*froms)); for ( fromindex = 0 ; fromindex < endfrom ; fromindex++ ) { if ( froms[fromindex] == 0 ) { continue; } frompc = s_lowpc + (fromindex * HASHFRACTION * sizeof(*froms)); for (toindex=froms[fromindex]; toindex!=0; toindex=tos[toindex].link) { # ifdef DEBUG fprintf( stderr , "[mcleanup] frompc 0x%x selfpc 0x%x count %d\n" , frompc , tos[toindex].selfpc , tos[toindex].count ); # endif /* DEBUG */ rawarc.raw_frompc = (unsigned long) frompc; rawarc.raw_selfpc = (unsigned long) tos[toindex].selfpc; rawarc.raw_count = tos[toindex].count; write( fd , &rawarc , sizeof rawarc ); } } close( fd ); } /* Solaris 2 libraries use _mcount. */ asm(".globl _mcount; _mcount: jmp internal_mcount"); /* This is for compatibility with old versions of gcc which used mcount. */ asm(".globl mcount; mcount: jmp internal_mcount"); void internal_mcount (void) { register char *selfpc; register unsigned short *frompcindex; register struct tostruct *top; register struct tostruct *prevtop; register long toindex; static char already_setup; /* * find the return address for mcount, * and the return address for mcount's caller. */ /* selfpc = pc pushed by mcount call. This identifies the function that was just entered. */ selfpc = (void *) __builtin_return_address (0); /* frompcindex = pc in preceding frame. This identifies the caller of the function just entered. */ frompcindex = (void *) __builtin_return_address (1); if(!already_setup) { extern char etext[]; already_setup = 1; /* monstartup(0, etext); */ monstartup((char*)0x08040000, etext); #ifdef USE_ONEXIT on_exit(_mcleanup, 0); #else atexit(_mcleanup); #endif } /* * check that we are profiling * and that we aren't recursively invoked. */ if (profiling) { goto out; } profiling++; /* * check that frompcindex is a reasonable pc value. * for example: signal catchers get called from the stack, * not from text space. too bad. */ frompcindex = (unsigned short *)((long)frompcindex - (long)s_lowpc); if ((unsigned long)frompcindex > s_textsize) { goto done; } frompcindex = &froms[((long)frompcindex) / (HASHFRACTION * sizeof(*froms))]; toindex = *frompcindex; if (toindex == 0) { /* * first time traversing this arc */ toindex = ++tos[0].link; if (toindex >= tolimit) { goto overflow; } *frompcindex = toindex; top = &tos[toindex]; top->selfpc = selfpc; top->count = 1; top->link = 0; goto done; } top = &tos[toindex]; if (top->selfpc == selfpc) { /* * arc at front of chain; usual case. */ top->count++; goto done; } /* * have to go looking down chain for it. * top points to what we are looking at, * prevtop points to previous top. * we know it is not at the head of the chain. */ for (; /* goto done */; ) { if (top->link == 0) { /* * top is end of the chain and none of the chain * had top->selfpc == selfpc. * so we allocate a new tostruct * and link it to the head of the chain. */ toindex = ++tos[0].link; if (toindex >= tolimit) { goto overflow; } top = &tos[toindex]; top->selfpc = selfpc; top->count = 1; top->link = *frompcindex; *frompcindex = toindex; goto done; } /* * otherwise, check the next arc on the chain. */ prevtop = top; top = &tos[top->link]; if (top->selfpc == selfpc) { /* * there it is. * increment its count * move it to the head of the chain. */ top->count++; toindex = prevtop->link; prevtop->link = top->link; top->link = *frompcindex; *frompcindex = toindex; goto done; } } done: profiling--; /* and fall through */ out: return; /* normal return restores saved registers */ overflow: profiling++; /* halt further profiling */ # define TOLIMIT "mcount: tos overflow\n" write(2, TOLIMIT, sizeof(TOLIMIT)); goto out; } /* * Control profiling * profiling is what mcount checks to see if * all the data structures are ready. */ static void moncontrol(int mode) { if (mode) { /* start */ profil((unsigned short *)(sbuf + sizeof(struct phdr)), ssiz - sizeof(struct phdr), (long)s_lowpc, s_scale); profiling = 0; } else { /* stop */ profil((unsigned short *)0, 0, 0, 0); profiling = 3; } }
Go to most recent revision | Compare with Previous | Blame | View Log