URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.2.2/] [gcc/] [config/] [mmix/] [mmix.h] - Rev 154
Compare with Previous | Blame | View Log
/* Definitions of target machine for GNU compiler, for MMIX. Copyright (C) 2000, 2001, 2002, 2004, 2005, 2007 Free Software Foundation, Inc. Contributed by Hans-Peter Nilsson (hp@bitrange.com) This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */ #ifndef GCC_MMIX_H #define GCC_MMIX_H /* First, some local helper macros. Note that the "default" value of FIXED_REGISTERS, CALL_USED_REGISTERS, REG_ALLOC_ORDER and REG_CLASS_CONTENTS depend on these values. */ #define MMIX_RESERVED_GNU_ARG_0_REGNUM 231 #define MMIX_FIRST_ARG_REGNUM \ (TARGET_ABI_GNU ? MMIX_RESERVED_GNU_ARG_0_REGNUM : 16) #define MMIX_FIRST_INCOMING_ARG_REGNUM \ (TARGET_ABI_GNU ? MMIX_RESERVED_GNU_ARG_0_REGNUM : 0) #define MMIX_MAX_ARGS_IN_REGS 16 /* FIXME: This one isn't fully implemented yet. Return values larger than one register are passed by reference in MMIX_STRUCT_VALUE_REGNUM by the caller, except for return values of type "complex". */ #define MMIX_MAX_REGS_FOR_VALUE 16 #define MMIX_RETURN_VALUE_REGNUM \ (TARGET_ABI_GNU ? MMIX_RESERVED_GNU_ARG_0_REGNUM : 15) #define MMIX_OUTGOING_RETURN_VALUE_REGNUM \ (TARGET_ABI_GNU ? MMIX_RESERVED_GNU_ARG_0_REGNUM : 0) #define MMIX_STRUCT_VALUE_REGNUM 251 #define MMIX_STATIC_CHAIN_REGNUM 252 #define MMIX_FRAME_POINTER_REGNUM 253 #define MMIX_STACK_POINTER_REGNUM 254 #define MMIX_LAST_GENERAL_REGISTER 255 #define MMIX_INCOMING_RETURN_ADDRESS_REGNUM MMIX_rJ_REGNUM #define MMIX_HIMULT_REGNUM 258 #define MMIX_REMAINDER_REGNUM MMIX_rR_REGNUM #define MMIX_ARG_POINTER_REGNUM 261 #define MMIX_rO_REGNUM 262 #define MMIX_LAST_STACK_REGISTER_REGNUM 31 /* Four registers; "ideally, these registers should be call-clobbered", so just grab a bunch of the common clobbered registers. FIXME: Last registers of return-value should be used, with an error if there's a return-value (that collides in size). */ #define MMIX_EH_RETURN_DATA_REGNO_START (MMIX_STRUCT_VALUE_REGNUM - 4) /* Try to keep the definitions from running away on their own. */ #if (MMIX_EH_RETURN_DATA_REGNO_START \ != MMIX_RESERVED_GNU_ARG_0_REGNUM + MMIX_MAX_ARGS_IN_REGS) #error MMIX register definition inconsistency #endif #if (MMIX_MAX_REGS_FOR_VALUE + MMIX_MAX_ARGS_IN_REGS > 32) #error MMIX parameters and return values bad, more than 32 registers #endif /* This chosen as "a call-clobbered hard register that is otherwise untouched by the epilogue". */ #define MMIX_EH_RETURN_STACKADJ_REGNUM MMIX_STATIC_CHAIN_REGNUM #ifdef REG_OK_STRICT # define MMIX_REG_OK_STRICT 1 #else # define MMIX_REG_OK_STRICT 0 #endif #define MMIX_FUNCTION_ARG_SIZE(MODE, TYPE) \ ((MODE) != BLKmode ? GET_MODE_SIZE (MODE) : int_size_in_bytes (TYPE)) /* Declarations for helper variables that are not tied to a particular target macro. */ extern GTY(()) rtx mmix_compare_op0; extern GTY(()) rtx mmix_compare_op1; /* Per-function machine data. This is normally an opaque type just defined and used in the tm.c file, but we need to see the definition in mmix.md too. */ struct machine_function GTY(()) { int has_landing_pad; int highest_saved_stack_register; int in_prologue; }; /* For these target macros, there is no generic documentation here. You should read `Using and Porting GCC' for that. Only comments specific to the MMIX target are here. There are however references to the specific texinfo node (comments with "Node:"), so there should be little or nothing amiss. Probably the opposite, since we don't have to care about old littering and soon outdated generic comments. */ /* Node: Driver */ /* User symbols are in the same name-space as built-in symbols, but we don't need the built-in symbols, so remove those and instead apply stricter operand checking. Don't warn when expanding insns. */ #define ASM_SPEC "-no-predefined-syms -x" /* Pass on -mset-program-start=N and -mset-data-start=M to the linker. Provide default program start 0x100 unless -mno-set-program-start. Don't do this if linking relocatably, with -r. For a final link, produce mmo, unless ELF is requested or when linking relocatably. */ #define LINK_SPEC \ "%{mset-program-start=*:--defsym __.MMIX.start..text=%*}\ %{mset-data-start=*:--defsym __.MMIX.start..data=%*}\ %{!mset-program-start=*:\ %{!mno-set-program-start:\ %{!r:--defsym __.MMIX.start..text=0x100}}}\ %{!melf:%{!r:-m mmo}}%{melf|r:-m elf64mmix}" /* FIXME: There's no provision for profiling here. */ #define STARTFILE_SPEC \ "crti%O%s crtbegin%O%s" #define ENDFILE_SPEC "crtend%O%s crtn%O%s" /* Node: Run-time Target */ /* Define __LONG_MAX__, since we're advised not to change glimits.h. */ #define TARGET_CPU_CPP_BUILTINS() \ do \ { \ builtin_define ("__mmix__"); \ builtin_define ("__MMIX__"); \ if (TARGET_ABI_GNU) \ builtin_define ("__MMIX_ABI_GNU__"); \ else \ builtin_define ("__MMIX_ABI_MMIXWARE__"); \ } \ while (0) extern int target_flags; #define TARGET_DEFAULT \ (MASK_BRANCH_PREDICT | MASK_BASE_ADDRESSES | MASK_USE_RETURN_INSN) /* Unfortunately, this must not reference anything in "mmix.c". */ #define TARGET_VERSION \ fprintf (stderr, " (MMIX)") #define OVERRIDE_OPTIONS mmix_override_options () #define OPTIMIZATION_OPTIONS(LEVEL, SIZE) \ do \ { \ if (LEVEL >= 1) \ flag_regmove = TRUE; \ \ if (SIZE || LEVEL > 1) \ { \ flag_omit_frame_pointer = TRUE; \ } \ } \ while (0) /* This one will have to wait a little bit; right now we can't debug neither with or without a frame-pointer. */ /* #define CAN_DEBUG_WITHOUT_FP */ /* Node: Per-Function Data */ #define INIT_EXPANDERS mmix_init_expanders () /* Node: Storage Layout */ /* I see no bit-field instructions. Anyway, the common order is from low to high, as the power of two, hence little-endian. */ #define BITS_BIG_ENDIAN 0 #define BYTES_BIG_ENDIAN 1 #define WORDS_BIG_ENDIAN 1 #define FLOAT_WORDS_BIG_ENDIAN 1 #define UNITS_PER_WORD 8 /* FIXME: Promotion of modes currently generates slow code, extending before every operation. */ /* I'm a little bit undecided about this one. It might be beneficial to promote all operations. */ #define PROMOTE_FUNCTION_MODE(MODE, UNSIGNEDP, TYPE) \ do { \ if (GET_MODE_CLASS (MODE) == MODE_INT \ && GET_MODE_SIZE (MODE) < 8) \ { \ (MODE) = DImode; \ /* Do the following some time later, \ scrutinizing differences. */ \ if (0) (UNSIGNEDP) = 0; \ } \ } while (0) /* We need to align everything to 64 bits that can affect the alignment of other types. Since address N is interpreted in MMIX as (N modulo access_size), we must align. */ #define PARM_BOUNDARY 64 #define STACK_BOUNDARY 64 #define FUNCTION_BOUNDARY 32 #define BIGGEST_ALIGNMENT 64 /* This one is only used in the ADA front end. */ #define MINIMUM_ATOMIC_ALIGNMENT 8 /* Copied from elfos.h. */ #define MAX_OFILE_ALIGNMENT (32768 * 8) #define DATA_ALIGNMENT(TYPE, BASIC_ALIGN) \ mmix_data_alignment (TYPE, BASIC_ALIGN) #define CONSTANT_ALIGNMENT(CONSTANT, BASIC_ALIGN) \ mmix_constant_alignment (CONSTANT, BASIC_ALIGN) #define LOCAL_ALIGNMENT(TYPE, BASIC_ALIGN) \ mmix_local_alignment (TYPE, BASIC_ALIGN) /* Following other ports, this seems to most commonly be the word-size, so let's do that here too. */ #define EMPTY_FIELD_BOUNDARY 64 /* We chose to have this low solely for similarity with the alpha. It has nothing to do with passing the tests dg/c99-scope-2 and execute/align-1.c. Nothing. Though the tests seem wrong. Padding of the structure is automatically added to get alignment when needed if we set this to just byte-boundary. */ #define STRUCTURE_SIZE_BOUNDARY 8 /* The lower bits are ignored. */ #define STRICT_ALIGNMENT 1 /* Node: Type Layout */ /* It might seem more natural to have 64-bit ints on a 64-bit machine, but then an occasional MMIX programmer needs to know how to put a lot of __attribute__ stuff to get to the 8, 16 and 32-bit modes rather than the "intuitive" char, short and int types. */ #define INT_TYPE_SIZE 32 #define SHORT_TYPE_SIZE 16 #define LONG_LONG_TYPE_SIZE 64 #define FLOAT_TYPE_SIZE 32 #define DOUBLE_TYPE_SIZE 64 #define LONG_DOUBLE_TYPE_SIZE 64 #define DEFAULT_SIGNED_CHAR 1 /* Node: Register Basics */ /* We tell GCC about all 256 general registers, and we also include rD, rE, rH, rJ, rR and rO (in that order) so we can describe what insns clobber them. We use a faked register for the argument pointer. It is always eliminated towards the frame-pointer or the stack-pointer, never output in assembly. Any fixed register would do for this, like $255, but future debugging is easier when using a separate register. It counts as a global register for pseudorandom reasons. */ #define FIRST_PSEUDO_REGISTER 263 /* We treat general registers with no assigned purpose as fixed. The stack pointer, $254, is also fixed. Register $255 is referred to as a temporary register in the MMIX papers, and used as such in mmixal, so it should not be used as a stack pointer. We set it to fixed, and use it "manually" at times of despair. */ #define FIXED_REGISTERS \ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, \ 1, 1, 0, 0, 0, 1, 1 \ } /* General registers are fixed and therefore "historically" marked call-used. (FIXME: This has changed). Registers $15..$31 are call-clobbered; we'll put arguments in $16 and up, and we need $15 for the MMIX register-stack "hole". */ #define CALL_USED_REGISTERS \ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, \ 1, 1, 1, 1, 1, 1, 1 \ } #define CONDITIONAL_REGISTER_USAGE mmix_conditional_register_usage () /* No INCOMING_REGNO or OUTGOING_REGNO, since those macros are not usable for MMIX: it doesn't have a fixed register window size. FIXME: Perhaps we should say something about $0..$15 may sometimes be the incoming $16..$31. Those macros need better documentation; it looks like they're just bogus and that FUNCTION_INCOMING_ARG_REGNO_P and FUNCTION_OUTGOING_VALUE should be used where they're used. For the moment, do nothing; things seem to work anyway. */ /* Defining LOCAL_REGNO is necessary in presence of prologue/epilogue, else GCC will be confused that those registers aren't saved and restored. */ #define LOCAL_REGNO(REGNO) mmix_local_regno (REGNO) /* Node: Allocation Order */ /* We should allocate registers from 0 to 31 by increasing number, because I think that's what people expect. Beyond that, just use call-clobbered global registers first, then call-clobbered special registers. Last, the fixed registers. */ #define MMIX_MMIXWARE_ABI_REG_ALLOC_ORDER \ { 0, 1, 2, 3, 4, 5, 6, 7, \ 8, 9, 10, 11, 12, 13, 14, 15, \ 16, 17, 18, 19, 20, 21, 22, 23, \ 24, 25, 26, 27, 28, 29, 30, 31, \ \ 252, 251, 250, 249, 248, 247, \ \ 253, \ \ 258, 260, 259, \ \ 32, 33, 34, 35, 36, 37, 38, 39, \ 40, 41, 42, 43, 44, 45, 46, 47, \ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, \ 64, 65, 66, 67, 68, 69, 70, 71, \ 72, 73, 74, 75, 76, 77, 78, 79, \ 80, 81, 82, 83, 84, 85, 86, 87, \ 88, 89, 90, 91, 92, 93, 94, 95, \ 96, 97, 98, 99, 100, 101, 102, 103, \ 104, 105, 106, 107, 108, 109, 110, 111, \ 112, 113, 114, 115, 116, 117, 118, 119, \ 120, 121, 122, 123, 124, 125, 126, 127, \ 128, 129, 130, 131, 132, 133, 134, 135, \ 136, 137, 138, 139, 140, 141, 142, 143, \ 144, 145, 146, 147, 148, 149, 150, 151, \ 152, 153, 154, 155, 156, 157, 158, 159, \ 160, 161, 162, 163, 164, 165, 166, 167, \ 168, 169, 170, 171, 172, 173, 174, 175, \ 176, 177, 178, 179, 180, 181, 182, 183, \ 184, 185, 186, 187, 188, 189, 190, 191, \ 192, 193, 194, 195, 196, 197, 198, 199, \ 200, 201, 202, 203, 204, 205, 206, 207, \ 208, 209, 210, 211, 212, 213, 214, 215, \ 216, 217, 218, 219, 220, 221, 222, 223, \ 224, 225, 226, 227, 228, 229, 230, 231, \ 232, 233, 234, 235, 236, 237, 238, 239, \ 240, 241, 242, 243, 244, 245, 246, \ \ 254, 255, 256, 257, 261, 262 \ } /* As a convenience, we put this nearby, for ease of comparison. First, call-clobbered registers in reverse order of assignment as parameters (also the top ones; not because they're parameters, but for continuity). Second, saved registers that go on the register-stack. Third, special registers rH, rR and rJ. They should not normally be allocated, but since they're call-clobbered, it is cheaper to use one of them than using a call-saved register for a call-clobbered use, assuming it is referenced a very limited number of times. Other global and fixed registers come next; they are never allocated. */ #define MMIX_GNU_ABI_REG_ALLOC_ORDER \ { 252, 251, 250, 249, 248, 247, 246, \ 245, 244, 243, 242, 241, 240, 239, 238, \ 237, 236, 235, 234, 233, 232, 231, \ \ 0, 1, 2, 3, 4, 5, 6, 7, \ 8, 9, 10, 11, 12, 13, 14, 15, \ 16, 17, 18, 19, 20, 21, 22, 23, \ 24, 25, 26, 27, 28, 29, 30, 31, \ \ 253, \ \ 258, 260, 259, \ \ 32, 33, 34, 35, 36, 37, 38, 39, \ 40, 41, 42, 43, 44, 45, 46, 47, \ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, \ 64, 65, 66, 67, 68, 69, 70, 71, \ 72, 73, 74, 75, 76, 77, 78, 79, \ 80, 81, 82, 83, 84, 85, 86, 87, \ 88, 89, 90, 91, 92, 93, 94, 95, \ 96, 97, 98, 99, 100, 101, 102, 103, \ 104, 105, 106, 107, 108, 109, 110, 111, \ 112, 113, 114, 115, 116, 117, 118, 119, \ 120, 121, 122, 123, 124, 125, 126, 127, \ 128, 129, 130, 131, 132, 133, 134, 135, \ 136, 137, 138, 139, 140, 141, 142, 143, \ 144, 145, 146, 147, 148, 149, 150, 151, \ 152, 153, 154, 155, 156, 157, 158, 159, \ 160, 161, 162, 163, 164, 165, 166, 167, \ 168, 169, 170, 171, 172, 173, 174, 175, \ 176, 177, 178, 179, 180, 181, 182, 183, \ 184, 185, 186, 187, 188, 189, 190, 191, \ 192, 193, 194, 195, 196, 197, 198, 199, \ 200, 201, 202, 203, 204, 205, 206, 207, \ 208, 209, 210, 211, 212, 213, 214, 215, \ 216, 217, 218, 219, 220, 221, 222, 223, \ 224, 225, 226, 227, 228, 229, 230, \ \ 254, 255, 256, 257, 261, 262 \ } /* The default one. */ #define REG_ALLOC_ORDER MMIX_MMIXWARE_ABI_REG_ALLOC_ORDER /* Node: Values in Registers */ #define HARD_REGNO_NREGS(REGNO, MODE) \ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) \ / UNITS_PER_WORD) #define HARD_REGNO_MODE_OK(REGNO, MODE) 1 /* Note that no register can really be accessed in single-float mode, so we *can* say 1 here. FIXME: Will TRT happen for single-float, or do we have to punt to libgcc1.asm? */ #define MODES_TIEABLE_P(MODE1, MODE2) 1 /* Node: Leaf Functions */ /* (empty) */ /* Node: Register Classes */ enum reg_class { NO_REGS, GENERAL_REGS, REMAINDER_REG, HIMULT_REG, SYSTEM_REGS, ALL_REGS, LIM_REG_CLASSES }; #define N_REG_CLASSES (int) LIM_REG_CLASSES #define REG_CLASS_NAMES \ {"NO_REGS", "GENERAL_REGS", "REMAINDER_REG", "HIMULT_REG", \ "SYSTEM_REGS", "ALL_REGS"} /* Note that the contents of each item is always 32 bits. */ #define REG_CLASS_CONTENTS \ {{0, 0, 0, 0, 0, 0, 0, 0, 0}, \ {~0, ~0, ~0, ~0, ~0, ~0, ~0, ~0, 0x20}, \ {0, 0, 0, 0, 0, 0, 0, 0, 0x10}, \ {0, 0, 0, 0, 0, 0, 0, 0, 4}, \ {0, 0, 0, 0, 0, 0, 0, 0, 0x7f}, \ {~0, ~0, ~0, ~0, ~0, ~0, ~0, ~0, 0x7f}} #define REGNO_REG_CLASS(REGNO) \ ((REGNO) <= MMIX_LAST_GENERAL_REGISTER \ || (REGNO) == MMIX_ARG_POINTER_REGNUM \ ? GENERAL_REGS \ : (REGNO) == MMIX_REMAINDER_REGNUM ? REMAINDER_REG \ : (REGNO) == MMIX_HIMULT_REGNUM ? HIMULT_REG : SYSTEM_REGS) #define BASE_REG_CLASS GENERAL_REGS #define INDEX_REG_CLASS GENERAL_REGS #define REG_CLASS_FROM_LETTER(CHAR) \ ((CHAR) == 'x' ? SYSTEM_REGS \ : (CHAR) == 'y' ? REMAINDER_REG \ : (CHAR) == 'z' ? HIMULT_REG : NO_REGS) #define REGNO_OK_FOR_BASE_P(REGNO) \ ((REGNO) <= MMIX_LAST_GENERAL_REGISTER \ || (REGNO) == MMIX_ARG_POINTER_REGNUM \ || (reg_renumber[REGNO] > 0 \ && reg_renumber[REGNO] <= MMIX_LAST_GENERAL_REGISTER)) #define REGNO_OK_FOR_INDEX_P(REGNO) REGNO_OK_FOR_BASE_P (REGNO) #define PREFERRED_RELOAD_CLASS(X, CLASS) \ mmix_preferred_reload_class (X, CLASS) #define PREFERRED_OUTPUT_RELOAD_CLASS(X, CLASS) \ mmix_preferred_output_reload_class (X, CLASS) #define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) \ mmix_secondary_reload_class (CLASS, MODE, X, 1) #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) \ mmix_secondary_reload_class (CLASS, MODE, X, 0) #define CLASS_MAX_NREGS(CLASS, MODE) HARD_REGNO_NREGS (CLASS, MODE) #define CONST_OK_FOR_LETTER_P(VALUE, C) \ mmix_const_ok_for_letter_p (VALUE, C) #define EXTRA_CONSTRAINT(VALUE, C) \ mmix_extra_constraint (VALUE, C, MMIX_REG_OK_STRICT) /* Do we need anything serious here? Yes, any FLOT constant. */ #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \ mmix_const_double_ok_for_letter_p (VALUE, C) /* Node: Frame Layout */ #define STACK_GROWS_DOWNWARD #define FRAME_GROWS_DOWNWARD 1 #define STARTING_FRAME_OFFSET \ mmix_starting_frame_offset () #define FIRST_PARM_OFFSET(FUNDECL) 0 #define DYNAMIC_CHAIN_ADDRESS(FRAMEADDR) \ mmix_dynamic_chain_address (FRAMEADDR) /* FIXME: It seems RETURN_ADDR_OFFSET is undocumented. */ #define SETUP_FRAME_ADDRESSES() \ mmix_setup_frame_addresses () #define RETURN_ADDR_RTX(COUNT, FRAME) \ mmix_return_addr_rtx (COUNT, FRAME) /* It's in rJ before we store it somewhere. */ #define INCOMING_RETURN_ADDR_RTX \ gen_rtx_REG (Pmode, MMIX_INCOMING_RETURN_ADDRESS_REGNUM) /* FIXME: This does not seem properly documented or cross-indexed. Nowhere except in the code does it say it *has* to be in the range 0..255, or else it will be truncated. That goes for the default too. */ #define DWARF_FRAME_RETURN_COLUMN \ DWARF_FRAME_REGNUM (MMIX_INCOMING_RETURN_ADDRESS_REGNUM) /* No return address is stored there. */ #define INCOMING_FRAME_SP_OFFSET 0 /* Node: Stack Checking */ /* (empty) */ /* Node: Exception Handling */ #define EH_RETURN_DATA_REGNO(N) \ mmix_eh_return_data_regno (N) #define EH_RETURN_STACKADJ_RTX \ mmix_eh_return_stackadj_rtx () #define EH_RETURN_HANDLER_RTX \ mmix_eh_return_handler_rtx () #define ASM_PREFERRED_EH_DATA_FORMAT(CODE, GLOBAL) \ mmix_asm_preferred_eh_data_format (CODE, GLOBAL) /* Node: Frame Registers */ #define STACK_POINTER_REGNUM MMIX_STACK_POINTER_REGNUM /* Perhaps we can use HARD_FRAME_POINTER_REGNUM and decide later on what register we want to use. */ #define FRAME_POINTER_REGNUM MMIX_FRAME_POINTER_REGNUM #define ARG_POINTER_REGNUM MMIX_ARG_POINTER_REGNUM #define STATIC_CHAIN_REGNUM MMIX_STATIC_CHAIN_REGNUM /* Node: Elimination */ /* FIXME: Is this requirement built-in? Anyway, we should try to get rid of it; we can deduce the value. */ #define FRAME_POINTER_REQUIRED current_function_has_nonlocal_label /* The frame-pointer is stored in a location that either counts to the offset of incoming parameters, or that counts to the offset of the frame, so we can't use a single offset. We therefore eliminate those two separately. */ #define ELIMINABLE_REGS \ {{ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \ {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}} /* We need not worry about when the frame-pointer is required for other reasons; GCC takes care of those cases. */ #define CAN_ELIMINATE(FROM, TO) 1 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ (OFFSET) = mmix_initial_elimination_offset (FROM, TO) /* Node: Stack Arguments */ #define ACCUMULATE_OUTGOING_ARGS 1 #define RETURN_POPS_ARGS(FUNDECL, FUNTYPE, STACKSIZE) 0 /* Node: Register Arguments */ #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \ mmix_function_arg (&(CUM), MODE, TYPE, NAMED, 0) #define FUNCTION_INCOMING_ARG(CUM, MODE, TYPE, NAMED) \ mmix_function_arg (&(CUM), MODE, TYPE, NAMED, 1) typedef struct { int regs; int lib; } CUMULATIVE_ARGS; #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \ ((CUM).regs = 0, (CUM).lib = ((LIBNAME) != 0)) #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \ ((CUM).regs \ = ((targetm.calls.must_pass_in_stack (MODE, TYPE)) \ || (MMIX_FUNCTION_ARG_SIZE (MODE, TYPE) > 8 \ && !TARGET_LIBFUNC && !(CUM).lib)) \ ? (MMIX_MAX_ARGS_IN_REGS) + 1 \ : (CUM).regs + (7 + (MMIX_FUNCTION_ARG_SIZE (MODE, TYPE))) / 8) #define FUNCTION_ARG_REGNO_P(REGNO) \ mmix_function_arg_regno_p (REGNO, 0) #define FUNCTION_INCOMING_ARG_REGNO_P(REGNO) \ mmix_function_arg_regno_p (REGNO, 1) /* Node: Register Arguments */ #define FUNCTION_VALUE(VALTYPE, FUNC) \ gen_rtx_REG (TYPE_MODE (VALTYPE), MMIX_RETURN_VALUE_REGNUM) /* This needs to take care of the register hole for complex return values. */ #define FUNCTION_OUTGOING_VALUE(VALTYPE, FUNC) \ mmix_function_outgoing_value (VALTYPE, FUNC) #define LIBCALL_VALUE(MODE) \ gen_rtx_REG (MODE, MMIX_RETURN_VALUE_REGNUM) #define FUNCTION_VALUE_REGNO_P(REGNO) \ mmix_function_value_regno_p (REGNO) /* Node: Caller Saves */ /* (empty) */ /* Node: Function Entry */ /* See mmix.c for TARGET_ASM_FUNCTION_PROLOGUE and TARGET_ASM_FUNCTION_EPILOGUE. */ /* We need to say that the epilogue uses the return address, so the initial-value machinery restores it. FIXME: Some targets conditionalize on "reload_completed &&". Investigate difference. FIXME: Not needed if nonlocal_goto_stack_level. */ #define EPILOGUE_USES(REGNO) \ ((REGNO) == MMIX_INCOMING_RETURN_ADDRESS_REGNUM) /* Node: Profiling */ #define FUNCTION_PROFILER(FILE, LABELNO) \ mmix_function_profiler (FILE, LABELNO) /* Node: Trampolines */ #define TRAMPOLINE_TEMPLATE(FILE) \ mmix_trampoline_template (FILE) #define TRAMPOLINE_SIZE mmix_trampoline_size #define INITIALIZE_TRAMPOLINE(ADDR, FNADDR, STATIC_CHAIN) \ mmix_initialize_trampoline (ADDR, FNADDR, STATIC_CHAIN) /* Node: Addressing Modes */ #define CONSTANT_ADDRESS_P(X) \ mmix_constant_address_p (X) #define MAX_REGS_PER_ADDRESS 2 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, LABEL) \ if (mmix_legitimate_address (MODE, X, MMIX_REG_OK_STRICT)) \ goto LABEL #ifndef REG_OK_STRICT # define REG_OK_FOR_BASE_P(X) \ (REGNO (X) <= MMIX_LAST_GENERAL_REGISTER \ || REGNO (X) == MMIX_ARG_POINTER_REGNUM \ || REGNO (X) >= FIRST_PSEUDO_REGISTER) #else # define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X)) #endif /* REG_OK_STRICT */ #define REG_OK_FOR_INDEX_P(X) REG_OK_FOR_BASE_P (X) #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR, LABEL) #define LEGITIMATE_CONSTANT_P(X) \ mmix_legitimate_constant_p (X) /* Node: Condition Code */ #define SELECT_CC_MODE(OP, X, Y) \ mmix_select_cc_mode (OP, X, Y) /* A definition of CANONICALIZE_COMPARISON that changed LE and GT comparisons with -1 to LT and GE respectively, and LT, LTU, GE or GEU comparisons with 256 to 255 and LE, LEU, GT and GTU has been ineffective; the code path for performing the changes did not trig for neither the GCC testsuite nor ghostscript-6.52 nor Knuth's mmix.tar.gz itself (core GCC functionality supposedly handling it) with sources from 2002-06-06. */ #define REVERSIBLE_CC_MODE(MODE) \ mmix_reversible_cc_mode (MODE) /* Node: Costs */ /* The special registers can only move to and from general regs, and we need to check that their constraints match, so say 3 for them. */ /* WARNING: gcc-2.7.2.2 i686-pc-linux-gnulibc1 (as shipped with RH 4.2) miscompiles reload1.c:reload_cse_simplify_set; a call to reload_cse_regno_equal_p is missing when checking if a substitution of a register setting is valid if this is defined to just the expression in mmix_register_move_cost. Symptom: a (all?) register setting is optimized away for e.g. "char *p1(char *p) { return p+1; }" and the value of register zero ($0) is returned. We can workaround by making this a function call - unknown if this causes dire speed effects. */ #define REGISTER_MOVE_COST(MODE, FROM, TO) \ mmix_register_move_cost (MODE, FROM, TO) #define SLOW_BYTE_ACCESS 0 /* Node: Sections */ /* This must be a constant string, since it's used in crtstuff.c. */ #define TEXT_SECTION_ASM_OP \ "\t.text ! mmixal:= 9H LOC 8B" /* FIXME: Not documented. */ #define DATA_SECTION_ASM_OP \ mmix_data_section_asm_op () #define READONLY_DATA_SECTION_ASM_OP "\t.section\t.rodata" /* Node: PIC */ /* (empty) */ /* Node: File Framework */ /* While any other punctuation character but ";" would do, we prefer "%" or "!"; "!" is an unary operator and so will not be mistakenly included in correctly formed expressions. The hash character adds mass; catches the eye. We can't have it as a comment char by itself, since it's a hex-number prefix. */ #define ASM_COMMENT_START "!#" /* These aren't currently functional. We just keep them as markers. */ #define ASM_APP_ON "%APP\n" #define ASM_APP_OFF "%NO_APP\n" #define ASM_OUTPUT_SOURCE_FILENAME(STREAM, NAME) \ mmix_asm_output_source_filename (STREAM, NAME) #define OUTPUT_QUOTED_STRING(STREAM, STRING) \ mmix_output_quoted_string (STREAM, STRING, strlen (STRING)) #define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section /* Node: Data Output */ #define ASM_OUTPUT_ASCII(STREAM, PTR, LEN) \ mmix_asm_output_ascii (STREAM, PTR, LEN) /* Node: Uninitialized Data */ #define ASM_OUTPUT_ALIGNED_COMMON(ST, N, S, A) \ mmix_asm_output_aligned_common (ST, N, S, A) #define ASM_OUTPUT_ALIGNED_LOCAL(ST, N, S, A) \ mmix_asm_output_aligned_local (ST, N, S, A) /* Node: Label Output */ #define ASM_OUTPUT_LABEL(STREAM, NAME) \ mmix_asm_output_label (STREAM, NAME) #define ASM_OUTPUT_INTERNAL_LABEL(STREAM, NAME) \ mmix_asm_output_internal_label (STREAM, NAME) #define ASM_DECLARE_REGISTER_GLOBAL(STREAM, DECL, REGNO, NAME) \ mmix_asm_declare_register_global (STREAM, DECL, REGNO, NAME) #define GLOBAL_ASM_OP "\t.global " #define ASM_WEAKEN_LABEL(STREAM, NAME) \ mmix_asm_weaken_label (STREAM, NAME) #define MAKE_DECL_ONE_ONLY(DECL) \ mmix_make_decl_one_only (DECL) #define ASM_OUTPUT_LABELREF(STREAM, NAME) \ mmix_asm_output_labelref (STREAM, NAME) /* We insert a ":" to disambiguate against user symbols like L5. */ #define ASM_GENERATE_INTERNAL_LABEL(LABEL, PREFIX, NUM) \ sprintf (LABEL, "*%s:%ld", PREFIX, (long)(NUM)) /* Insert "::"; these are rarer than internal labels. FIXME: Make sure no ":" is seen in the object file; we don't really want that mmixal feature visible there. We don't want the default, which uses a dot; that'd be incompatible with mmixal. */ #define ASM_PN_FORMAT "%s::%lu" #define ASM_OUTPUT_DEF(STREAM, NAME, VALUE) \ mmix_asm_output_def (STREAM, NAME, VALUE) /* Node: Macros for Initialization */ /* We're compiling to ELF and linking to MMO; fundamental ELF features that GCC depend on are there. */ /* These must be constant strings, since they're used in crtstuff.c. */ #define INIT_SECTION_ASM_OP "\t.section .init,\"ax\" ! mmixal-incompatible" #define FINI_SECTION_ASM_OP "\t.section .fini,\"ax\" ! mmixal-incompatible" #define OBJECT_FORMAT_ELF /* Node: Instruction Output */ /* The non-$ register names must be prefixed with ":", since they're affected by PREFIX. We provide the non-colon names as additional names. */ #define REGISTER_NAMES \ {"$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", \ "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", \ "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", \ "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31", \ "$32", "$33", "$34", "$35", "$36", "$37", "$38", "$39", \ "$40", "$41", "$42", "$43", "$44", "$45", "$46", "$47", \ "$48", "$49", "$50", "$51", "$52", "$53", "$54", "$55", \ "$56", "$57", "$58", "$59", "$60", "$61", "$62", "$63", \ "$64", "$65", "$66", "$67", "$68", "$69", "$70", "$71", \ "$72", "$73", "$74", "$75", "$76", "$77", "$78", "$79", \ "$80", "$81", "$82", "$83", "$84", "$85", "$86", "$87", \ "$88", "$89", "$90", "$91", "$92", "$93", "$94", "$95", \ "$96", "$97", "$98", "$99", "$100", "$101", "$102", "$103", \ "$104", "$105", "$106", "$107", "$108", "$109", "$110", "$111", \ "$112", "$113", "$114", "$115", "$116", "$117", "$118", "$119", \ "$120", "$121", "$122", "$123", "$124", "$125", "$126", "$127", \ "$128", "$129", "$130", "$131", "$132", "$133", "$134", "$135", \ "$136", "$137", "$138", "$139", "$140", "$141", "$142", "$143", \ "$144", "$145", "$146", "$147", "$148", "$149", "$150", "$151", \ "$152", "$153", "$154", "$155", "$156", "$157", "$158", "$159", \ "$160", "$161", "$162", "$163", "$164", "$165", "$166", "$167", \ "$168", "$169", "$170", "$171", "$172", "$173", "$174", "$175", \ "$176", "$177", "$178", "$179", "$180", "$181", "$182", "$183", \ "$184", "$185", "$186", "$187", "$188", "$189", "$190", "$191", \ "$192", "$193", "$194", "$195", "$196", "$197", "$198", "$199", \ "$200", "$201", "$202", "$203", "$204", "$205", "$206", "$207", \ "$208", "$209", "$210", "$211", "$212", "$213", "$214", "$215", \ "$216", "$217", "$218", "$219", "$220", "$221", "$222", "$223", \ "$224", "$225", "$226", "$227", "$228", "$229", "$230", "$231", \ "$232", "$233", "$234", "$235", "$236", "$237", "$238", "$239", \ "$240", "$241", "$242", "$243", "$244", "$245", "$246", "$247", \ "$248", "$249", "$250", "$251", "$252", "$253", "$254", "$255", \ ":rD", ":rE", ":rH", ":rJ", ":rR", "ap_!BAD!", ":rO"} #define ADDITIONAL_REGISTER_NAMES \ {{"sp", 254}, {":sp", 254}, {"rD", 256}, {"rE", 257}, \ {"rH", 258}, {"rJ", MMIX_rJ_REGNUM}, {"rO", MMIX_rO_REGNUM}} #define PRINT_OPERAND(STREAM, X, CODE) \ mmix_print_operand (STREAM, X, CODE) #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \ mmix_print_operand_punct_valid_p (CODE) #define PRINT_OPERAND_ADDRESS(STREAM, X) \ mmix_print_operand_address (STREAM, X) #define ASM_OUTPUT_REG_PUSH(STREAM, REGNO) \ mmix_asm_output_reg_push (STREAM, REGNO) #define ASM_OUTPUT_REG_POP(STREAM, REGNO) \ mmix_asm_output_reg_pop (STREAM, REGNO) /* Node: Dispatch Tables */ /* We define both types, since SImode is the better, but DImode the only possible for mmixal so that's the one actually used. */ #define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \ mmix_asm_output_addr_diff_elt (STREAM, BODY, VALUE, REL) #define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \ mmix_asm_output_addr_vec_elt (STREAM, VALUE) /* Node: Exception Region Output */ /* (empty) */ /* Node: Alignment Output */ #define ASM_OUTPUT_SKIP(STREAM, NBYTES) \ mmix_asm_output_skip (STREAM, NBYTES) #define ASM_OUTPUT_ALIGN(STREAM, POWER) \ mmix_asm_output_align (STREAM, POWER) /* Node: All Debuggers */ #define DBX_REGISTER_NUMBER(REGNO) \ mmix_dbx_register_number (REGNO) /* Node: DBX Options */ /* (empty) */ /* Node: DBX Hooks */ /* (empty) */ /* Node: File Names and DBX */ /* (empty) */ /* Node: SDB and DWARF */ #define DWARF2_DEBUGGING_INFO 1 #define DWARF2_ASM_LINE_DEBUG_INFO 1 /* Node: Misc */ /* There's no way to get a PC-relative offset into tables for SImode, so for the moment we have absolute entries in DImode. When we're going ELF, these should be SImode and 1. */ #define CASE_VECTOR_MODE DImode #define CASE_VECTOR_PC_RELATIVE 0 #define WORD_REGISTER_OPERATIONS /* We have a choice, which makes this yet another parameter to tweak. The gut feeling is currently that SIGN_EXTEND wins; "int" is more frequent than "unsigned int", and we have signed characters. FIXME: measure. */ #define LOAD_EXTEND_OP(MODE) (TARGET_ZERO_EXTEND ? ZERO_EXTEND : SIGN_EXTEND) #define MOVE_MAX 8 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 /* ??? MMIX allows a choice of STORE_FLAG_VALUE. Revisit later, we don't have scc expanders yet. */ #define Pmode DImode #define FUNCTION_MODE QImode #define NO_IMPLICIT_EXTERN_C #define HANDLE_SYSV_PRAGMA 1 /* These are checked. */ #define DOLLARS_IN_IDENTIFIERS 0 #define NO_DOLLAR_IN_LABEL #define NO_DOT_IN_LABEL #endif /* GCC_MMIX_H */ /* * Local variables: * eval: (c-set-style "gnu") * indent-tabs-mode: t * End: */