URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.2.2/] [gcc/] [tree-scalar-evolution.c] - Rev 318
Go to most recent revision | Compare with Previous | Blame | View Log
/* Scalar evolution detector. Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. Contributed by Sebastian Pop <s.pop@laposte.net> This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */ /* Description: This pass analyzes the evolution of scalar variables in loop structures. The algorithm is based on the SSA representation, and on the loop hierarchy tree. This algorithm is not based on the notion of versions of a variable, as it was the case for the previous implementations of the scalar evolution algorithm, but it assumes that each defined name is unique. The notation used in this file is called "chains of recurrences", and has been proposed by Eugene Zima, Robert Van Engelen, and others for describing induction variables in programs. For example "b -> {0, +, 2}_1" means that the scalar variable "b" is equal to 0 when entering in the loop_1 and has a step 2 in this loop, in other words "for (b = 0; b < N; b+=2);". Note that the coefficients of this chain of recurrence (or chrec [shrek]) can contain the name of other variables, in which case they are called parametric chrecs. For example, "b -> {a, +, 2}_1" means that the initial value of "b" is the value of "a". In most of the cases these parametric chrecs are fully instantiated before their use because symbolic names can hide some difficult cases such as self-references described later (see the Fibonacci example). A short sketch of the algorithm is: Given a scalar variable to be analyzed, follow the SSA edge to its definition: - When the definition is a MODIFY_EXPR: if the right hand side (RHS) of the definition cannot be statically analyzed, the answer of the analyzer is: "don't know". Otherwise, for all the variables that are not yet analyzed in the RHS, try to determine their evolution, and finally try to evaluate the operation of the RHS that gives the evolution function of the analyzed variable. - When the definition is a condition-phi-node: determine the evolution function for all the branches of the phi node, and finally merge these evolutions (see chrec_merge). - When the definition is a loop-phi-node: determine its initial condition, that is the SSA edge defined in an outer loop, and keep it symbolic. Then determine the SSA edges that are defined in the body of the loop. Follow the inner edges until ending on another loop-phi-node of the same analyzed loop. If the reached loop-phi-node is not the starting loop-phi-node, then we keep this definition under a symbolic form. If the reached loop-phi-node is the same as the starting one, then we compute a symbolic stride on the return path. The result is then the symbolic chrec {initial_condition, +, symbolic_stride}_loop. Examples: Example 1: Illustration of the basic algorithm. | a = 3 | loop_1 | b = phi (a, c) | c = b + 1 | if (c > 10) exit_loop | endloop Suppose that we want to know the number of iterations of the loop_1. The exit_loop is controlled by a COND_EXPR (c > 10). We ask the scalar evolution analyzer two questions: what's the scalar evolution (scev) of "c", and what's the scev of "10". For "10" the answer is "10" since it is a scalar constant. For the scalar variable "c", it follows the SSA edge to its definition, "c = b + 1", and then asks again what's the scev of "b". Following the SSA edge, we end on a loop-phi-node "b = phi (a, c)", where the initial condition is "a", and the inner loop edge is "c". The initial condition is kept under a symbolic form (it may be the case that the copy constant propagation has done its work and we end with the constant "3" as one of the edges of the loop-phi-node). The update edge is followed to the end of the loop, and until reaching again the starting loop-phi-node: b -> c -> b. At this point we have drawn a path from "b" to "b" from which we compute the stride in the loop: in this example it is "+1". The resulting scev for "b" is "b -> {a, +, 1}_1". Now that the scev for "b" is known, it is possible to compute the scev for "c", that is "c -> {a + 1, +, 1}_1". In order to determine the number of iterations in the loop_1, we have to instantiate_parameters ({a + 1, +, 1}_1), that gives after some more analysis the scev {4, +, 1}_1, or in other words, this is the function "f (x) = x + 4", where x is the iteration count of the loop_1. Now we have to solve the inequality "x + 4 > 10", and take the smallest iteration number for which the loop is exited: x = 7. This loop runs from x = 0 to x = 7, and in total there are 8 iterations. In terms of loop normalization, we have created a variable that is implicitly defined, "x" or just "_1", and all the other analyzed scalars of the loop are defined in function of this variable: a -> 3 b -> {3, +, 1}_1 c -> {4, +, 1}_1 or in terms of a C program: | a = 3 | for (x = 0; x <= 7; x++) | { | b = x + 3 | c = x + 4 | } Example 2: Illustration of the algorithm on nested loops. | loop_1 | a = phi (1, b) | c = a + 2 | loop_2 10 times | b = phi (c, d) | d = b + 3 | endloop | endloop For analyzing the scalar evolution of "a", the algorithm follows the SSA edge into the loop's body: "a -> b". "b" is an inner loop-phi-node, and its analysis as in Example 1, gives: b -> {c, +, 3}_2 d -> {c + 3, +, 3}_2 Following the SSA edge for the initial condition, we end on "c = a + 2", and then on the starting loop-phi-node "a". From this point, the loop stride is computed: back on "c = a + 2" we get a "+2" in the loop_1, then on the loop-phi-node "b" we compute the overall effect of the inner loop that is "b = c + 30", and we get a "+30" in the loop_1. That means that the overall stride in loop_1 is equal to "+32", and the result is: a -> {1, +, 32}_1 c -> {3, +, 32}_1 Example 3: Higher degree polynomials. | loop_1 | a = phi (2, b) | c = phi (5, d) | b = a + 1 | d = c + a | endloop a -> {2, +, 1}_1 b -> {3, +, 1}_1 c -> {5, +, a}_1 d -> {5 + a, +, a}_1 instantiate_parameters ({5, +, a}_1) -> {5, +, 2, +, 1}_1 instantiate_parameters ({5 + a, +, a}_1) -> {7, +, 3, +, 1}_1 Example 4: Lucas, Fibonacci, or mixers in general. | loop_1 | a = phi (1, b) | c = phi (3, d) | b = c | d = c + a | endloop a -> (1, c)_1 c -> {3, +, a}_1 The syntax "(1, c)_1" stands for a PEELED_CHREC that has the following semantics: during the first iteration of the loop_1, the variable contains the value 1, and then it contains the value "c". Note that this syntax is close to the syntax of the loop-phi-node: "a -> (1, c)_1" vs. "a = phi (1, c)". The symbolic chrec representation contains all the semantics of the original code. What is more difficult is to use this information. Example 5: Flip-flops, or exchangers. | loop_1 | a = phi (1, b) | c = phi (3, d) | b = c | d = a | endloop a -> (1, c)_1 c -> (3, a)_1 Based on these symbolic chrecs, it is possible to refine this information into the more precise PERIODIC_CHRECs: a -> |1, 3|_1 c -> |3, 1|_1 This transformation is not yet implemented. Further readings: You can find a more detailed description of the algorithm in: http://icps.u-strasbg.fr/~pop/DEA_03_Pop.pdf http://icps.u-strasbg.fr/~pop/DEA_03_Pop.ps.gz. But note that this is a preliminary report and some of the details of the algorithm have changed. I'm working on a research report that updates the description of the algorithms to reflect the design choices used in this implementation. A set of slides show a high level overview of the algorithm and run an example through the scalar evolution analyzer: http://cri.ensmp.fr/~pop/gcc/mar04/slides.pdf The slides that I have presented at the GCC Summit'04 are available at: http://cri.ensmp.fr/~pop/gcc/20040604/gccsummit-lno-spop.pdf */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "ggc.h" #include "tree.h" #include "real.h" /* These RTL headers are needed for basic-block.h. */ #include "rtl.h" #include "basic-block.h" #include "diagnostic.h" #include "tree-flow.h" #include "tree-dump.h" #include "timevar.h" #include "cfgloop.h" #include "tree-chrec.h" #include "tree-scalar-evolution.h" #include "tree-pass.h" #include "flags.h" #include "params.h" static tree analyze_scalar_evolution_1 (struct loop *, tree, tree); static tree resolve_mixers (struct loop *, tree); /* The cached information about a ssa name VAR, claiming that inside LOOP, the value of VAR can be expressed as CHREC. */ struct scev_info_str { tree var; tree chrec; }; /* Counters for the scev database. */ static unsigned nb_set_scev = 0; static unsigned nb_get_scev = 0; /* The following trees are unique elements. Thus the comparison of another element to these elements should be done on the pointer to these trees, and not on their value. */ /* The SSA_NAMEs that are not yet analyzed are qualified with NULL_TREE. */ tree chrec_not_analyzed_yet; /* Reserved to the cases where the analyzer has detected an undecidable property at compile time. */ tree chrec_dont_know; /* When the analyzer has detected that a property will never happen, then it qualifies it with chrec_known. */ tree chrec_known; static bitmap already_instantiated; static htab_t scalar_evolution_info; /* Constructs a new SCEV_INFO_STR structure. */ static inline struct scev_info_str * new_scev_info_str (tree var) { struct scev_info_str *res; res = XNEW (struct scev_info_str); res->var = var; res->chrec = chrec_not_analyzed_yet; return res; } /* Computes a hash function for database element ELT. */ static hashval_t hash_scev_info (const void *elt) { return SSA_NAME_VERSION (((struct scev_info_str *) elt)->var); } /* Compares database elements E1 and E2. */ static int eq_scev_info (const void *e1, const void *e2) { const struct scev_info_str *elt1 = (const struct scev_info_str *) e1; const struct scev_info_str *elt2 = (const struct scev_info_str *) e2; return elt1->var == elt2->var; } /* Deletes database element E. */ static void del_scev_info (void *e) { free (e); } /* Get the index corresponding to VAR in the current LOOP. If it's the first time we ask for this VAR, then we return chrec_not_analyzed_yet for this VAR and return its index. */ static tree * find_var_scev_info (tree var) { struct scev_info_str *res; struct scev_info_str tmp; PTR *slot; tmp.var = var; slot = htab_find_slot (scalar_evolution_info, &tmp, INSERT); if (!*slot) *slot = new_scev_info_str (var); res = (struct scev_info_str *) *slot; return &res->chrec; } /* Return true when CHREC contains symbolic names defined in LOOP_NB. */ bool chrec_contains_symbols_defined_in_loop (tree chrec, unsigned loop_nb) { if (chrec == NULL_TREE) return false; if (TREE_INVARIANT (chrec)) return false; if (TREE_CODE (chrec) == VAR_DECL || TREE_CODE (chrec) == PARM_DECL || TREE_CODE (chrec) == FUNCTION_DECL || TREE_CODE (chrec) == LABEL_DECL || TREE_CODE (chrec) == RESULT_DECL || TREE_CODE (chrec) == FIELD_DECL) return true; if (TREE_CODE (chrec) == SSA_NAME) { tree def = SSA_NAME_DEF_STMT (chrec); struct loop *def_loop = loop_containing_stmt (def); struct loop *loop = current_loops->parray[loop_nb]; if (def_loop == NULL) return false; if (loop == def_loop || flow_loop_nested_p (loop, def_loop)) return true; return false; } switch (TREE_CODE_LENGTH (TREE_CODE (chrec))) { case 3: if (chrec_contains_symbols_defined_in_loop (TREE_OPERAND (chrec, 2), loop_nb)) return true; case 2: if (chrec_contains_symbols_defined_in_loop (TREE_OPERAND (chrec, 1), loop_nb)) return true; case 1: if (chrec_contains_symbols_defined_in_loop (TREE_OPERAND (chrec, 0), loop_nb)) return true; default: return false; } } /* Return true when PHI is a loop-phi-node. */ static bool loop_phi_node_p (tree phi) { /* The implementation of this function is based on the following property: "all the loop-phi-nodes of a loop are contained in the loop's header basic block". */ return loop_containing_stmt (phi)->header == bb_for_stmt (phi); } /* Compute the scalar evolution for EVOLUTION_FN after crossing LOOP. In general, in the case of multivariate evolutions we want to get the evolution in different loops. LOOP specifies the level for which to get the evolution. Example: | for (j = 0; j < 100; j++) | { | for (k = 0; k < 100; k++) | { | i = k + j; - Here the value of i is a function of j, k. | } | ... = i - Here the value of i is a function of j. | } | ... = i - Here the value of i is a scalar. Example: | i_0 = ... | loop_1 10 times | i_1 = phi (i_0, i_2) | i_2 = i_1 + 2 | endloop This loop has the same effect as: LOOP_1 has the same effect as: | i_1 = i_0 + 20 The overall effect of the loop, "i_0 + 20" in the previous example, is obtained by passing in the parameters: LOOP = 1, EVOLUTION_FN = {i_0, +, 2}_1. */ static tree compute_overall_effect_of_inner_loop (struct loop *loop, tree evolution_fn) { bool val = false; if (evolution_fn == chrec_dont_know) return chrec_dont_know; else if (TREE_CODE (evolution_fn) == POLYNOMIAL_CHREC) { if (CHREC_VARIABLE (evolution_fn) >= (unsigned) loop->num) { struct loop *inner_loop = current_loops->parray[CHREC_VARIABLE (evolution_fn)]; tree nb_iter = number_of_iterations_in_loop (inner_loop); if (nb_iter == chrec_dont_know) return chrec_dont_know; else { tree res; tree type = chrec_type (nb_iter); /* Number of iterations is off by one (the ssa name we analyze must be defined before the exit). */ nb_iter = chrec_fold_minus (type, nb_iter, build_int_cst (type, 1)); /* evolution_fn is the evolution function in LOOP. Get its value in the nb_iter-th iteration. */ res = chrec_apply (inner_loop->num, evolution_fn, nb_iter); /* Continue the computation until ending on a parent of LOOP. */ return compute_overall_effect_of_inner_loop (loop, res); } } else return evolution_fn; } /* If the evolution function is an invariant, there is nothing to do. */ else if (no_evolution_in_loop_p (evolution_fn, loop->num, &val) && val) return evolution_fn; else return chrec_dont_know; } /* Determine whether the CHREC is always positive/negative. If the expression cannot be statically analyzed, return false, otherwise set the answer into VALUE. */ bool chrec_is_positive (tree chrec, bool *value) { bool value0, value1, value2; tree type, end_value, nb_iter; switch (TREE_CODE (chrec)) { case POLYNOMIAL_CHREC: if (!chrec_is_positive (CHREC_LEFT (chrec), &value0) || !chrec_is_positive (CHREC_RIGHT (chrec), &value1)) return false; /* FIXME -- overflows. */ if (value0 == value1) { *value = value0; return true; } /* Otherwise the chrec is under the form: "{-197, +, 2}_1", and the proof consists in showing that the sign never changes during the execution of the loop, from 0 to loop->nb_iterations. */ if (!evolution_function_is_affine_p (chrec)) return false; nb_iter = number_of_iterations_in_loop (current_loops->parray[CHREC_VARIABLE (chrec)]); if (chrec_contains_undetermined (nb_iter)) return false; type = chrec_type (nb_iter); nb_iter = chrec_fold_minus (type, nb_iter, build_int_cst (type, 1)); #if 0 /* TODO -- If the test is after the exit, we may decrease the number of iterations by one. */ if (after_exit) nb_iter = chrec_fold_minus (type, nb_iter, build_int_cst (type, 1)); #endif end_value = chrec_apply (CHREC_VARIABLE (chrec), chrec, nb_iter); if (!chrec_is_positive (end_value, &value2)) return false; *value = value0; return value0 == value1; case INTEGER_CST: *value = (tree_int_cst_sgn (chrec) == 1); return true; default: return false; } } /* Associate CHREC to SCALAR. */ static void set_scalar_evolution (tree scalar, tree chrec) { tree *scalar_info; if (TREE_CODE (scalar) != SSA_NAME) return; scalar_info = find_var_scev_info (scalar); if (dump_file) { if (dump_flags & TDF_DETAILS) { fprintf (dump_file, "(set_scalar_evolution \n"); fprintf (dump_file, " (scalar = "); print_generic_expr (dump_file, scalar, 0); fprintf (dump_file, ")\n (scalar_evolution = "); print_generic_expr (dump_file, chrec, 0); fprintf (dump_file, "))\n"); } if (dump_flags & TDF_STATS) nb_set_scev++; } *scalar_info = chrec; } /* Retrieve the chrec associated to SCALAR in the LOOP. */ static tree get_scalar_evolution (tree scalar) { tree res; if (dump_file) { if (dump_flags & TDF_DETAILS) { fprintf (dump_file, "(get_scalar_evolution \n"); fprintf (dump_file, " (scalar = "); print_generic_expr (dump_file, scalar, 0); fprintf (dump_file, ")\n"); } if (dump_flags & TDF_STATS) nb_get_scev++; } switch (TREE_CODE (scalar)) { case SSA_NAME: res = *find_var_scev_info (scalar); break; case REAL_CST: case INTEGER_CST: res = scalar; break; default: res = chrec_not_analyzed_yet; break; } if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, " (scalar_evolution = "); print_generic_expr (dump_file, res, 0); fprintf (dump_file, "))\n"); } return res; } /* Helper function for add_to_evolution. Returns the evolution function for an assignment of the form "a = b + c", where "a" and "b" are on the strongly connected component. CHREC_BEFORE is the information that we already have collected up to this point. TO_ADD is the evolution of "c". When CHREC_BEFORE has an evolution part in LOOP_NB, add to this evolution the expression TO_ADD, otherwise construct an evolution part for this loop. */ static tree add_to_evolution_1 (unsigned loop_nb, tree chrec_before, tree to_add, tree at_stmt) { tree type, left, right; switch (TREE_CODE (chrec_before)) { case POLYNOMIAL_CHREC: if (CHREC_VARIABLE (chrec_before) <= loop_nb) { unsigned var; type = chrec_type (chrec_before); /* When there is no evolution part in this loop, build it. */ if (CHREC_VARIABLE (chrec_before) < loop_nb) { var = loop_nb; left = chrec_before; right = SCALAR_FLOAT_TYPE_P (type) ? build_real (type, dconst0) : build_int_cst (type, 0); } else { var = CHREC_VARIABLE (chrec_before); left = CHREC_LEFT (chrec_before); right = CHREC_RIGHT (chrec_before); } to_add = chrec_convert (type, to_add, at_stmt); right = chrec_convert (type, right, at_stmt); right = chrec_fold_plus (type, right, to_add); return build_polynomial_chrec (var, left, right); } else { /* Search the evolution in LOOP_NB. */ left = add_to_evolution_1 (loop_nb, CHREC_LEFT (chrec_before), to_add, at_stmt); right = CHREC_RIGHT (chrec_before); right = chrec_convert (chrec_type (left), right, at_stmt); return build_polynomial_chrec (CHREC_VARIABLE (chrec_before), left, right); } default: /* These nodes do not depend on a loop. */ if (chrec_before == chrec_dont_know) return chrec_dont_know; left = chrec_before; right = chrec_convert (chrec_type (left), to_add, at_stmt); return build_polynomial_chrec (loop_nb, left, right); } } /* Add TO_ADD to the evolution part of CHREC_BEFORE in the dimension of LOOP_NB. Description (provided for completeness, for those who read code in a plane, and for my poor 62 bytes brain that would have forgotten all this in the next two or three months): The algorithm of translation of programs from the SSA representation into the chrecs syntax is based on a pattern matching. After having reconstructed the overall tree expression for a loop, there are only two cases that can arise: 1. a = loop-phi (init, a + expr) 2. a = loop-phi (init, expr) where EXPR is either a scalar constant with respect to the analyzed loop (this is a degree 0 polynomial), or an expression containing other loop-phi definitions (these are higher degree polynomials). Examples: 1. | init = ... | loop_1 | a = phi (init, a + 5) | endloop 2. | inita = ... | initb = ... | loop_1 | a = phi (inita, 2 * b + 3) | b = phi (initb, b + 1) | endloop For the first case, the semantics of the SSA representation is: | a (x) = init + \sum_{j = 0}^{x - 1} expr (j) that is, there is a loop index "x" that determines the scalar value of the variable during the loop execution. During the first iteration, the value is that of the initial condition INIT, while during the subsequent iterations, it is the sum of the initial condition with the sum of all the values of EXPR from the initial iteration to the before last considered iteration. For the second case, the semantics of the SSA program is: | a (x) = init, if x = 0; | expr (x - 1), otherwise. The second case corresponds to the PEELED_CHREC, whose syntax is close to the syntax of a loop-phi-node: | phi (init, expr) vs. (init, expr)_x The proof of the translation algorithm for the first case is a proof by structural induction based on the degree of EXPR. Degree 0: When EXPR is a constant with respect to the analyzed loop, or in other words when EXPR is a polynomial of degree 0, the evolution of the variable A in the loop is an affine function with an initial condition INIT, and a step EXPR. In order to show this, we start from the semantics of the SSA representation: f (x) = init + \sum_{j = 0}^{x - 1} expr (j) and since "expr (j)" is a constant with respect to "j", f (x) = init + x * expr Finally, based on the semantics of the pure sum chrecs, by identification we get the corresponding chrecs syntax: f (x) = init * \binom{x}{0} + expr * \binom{x}{1} f (x) -> {init, +, expr}_x Higher degree: Suppose that EXPR is a polynomial of degree N with respect to the analyzed loop_x for which we have already determined that it is written under the chrecs syntax: | expr (x) -> {b_0, +, b_1, +, ..., +, b_{n-1}} (x) We start from the semantics of the SSA program: | f (x) = init + \sum_{j = 0}^{x - 1} expr (j) | | f (x) = init + \sum_{j = 0}^{x - 1} | (b_0 * \binom{j}{0} + ... + b_{n-1} * \binom{j}{n-1}) | | f (x) = init + \sum_{j = 0}^{x - 1} | \sum_{k = 0}^{n - 1} (b_k * \binom{j}{k}) | | f (x) = init + \sum_{k = 0}^{n - 1} | (b_k * \sum_{j = 0}^{x - 1} \binom{j}{k}) | | f (x) = init + \sum_{k = 0}^{n - 1} | (b_k * \binom{x}{k + 1}) | | f (x) = init + b_0 * \binom{x}{1} + ... | + b_{n-1} * \binom{x}{n} | | f (x) = init * \binom{x}{0} + b_0 * \binom{x}{1} + ... | + b_{n-1} * \binom{x}{n} | And finally from the definition of the chrecs syntax, we identify: | f (x) -> {init, +, b_0, +, ..., +, b_{n-1}}_x This shows the mechanism that stands behind the add_to_evolution function. An important point is that the use of symbolic parameters avoids the need of an analysis schedule. Example: | inita = ... | initb = ... | loop_1 | a = phi (inita, a + 2 + b) | b = phi (initb, b + 1) | endloop When analyzing "a", the algorithm keeps "b" symbolically: | a -> {inita, +, 2 + b}_1 Then, after instantiation, the analyzer ends on the evolution: | a -> {inita, +, 2 + initb, +, 1}_1 */ static tree add_to_evolution (unsigned loop_nb, tree chrec_before, enum tree_code code, tree to_add, tree at_stmt) { tree type = chrec_type (to_add); tree res = NULL_TREE; if (to_add == NULL_TREE) return chrec_before; /* TO_ADD is either a scalar, or a parameter. TO_ADD is not instantiated at this point. */ if (TREE_CODE (to_add) == POLYNOMIAL_CHREC) /* This should not happen. */ return chrec_dont_know; if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, "(add_to_evolution \n"); fprintf (dump_file, " (loop_nb = %d)\n", loop_nb); fprintf (dump_file, " (chrec_before = "); print_generic_expr (dump_file, chrec_before, 0); fprintf (dump_file, ")\n (to_add = "); print_generic_expr (dump_file, to_add, 0); fprintf (dump_file, ")\n"); } if (code == MINUS_EXPR) to_add = chrec_fold_multiply (type, to_add, SCALAR_FLOAT_TYPE_P (type) ? build_real (type, dconstm1) : build_int_cst_type (type, -1)); res = add_to_evolution_1 (loop_nb, chrec_before, to_add, at_stmt); if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, " (res = "); print_generic_expr (dump_file, res, 0); fprintf (dump_file, "))\n"); } return res; } /* Helper function. */ static inline tree set_nb_iterations_in_loop (struct loop *loop, tree res) { tree type = chrec_type (res); res = chrec_fold_plus (type, res, build_int_cst (type, 1)); /* FIXME HWI: However we want to store one iteration less than the count of the loop in order to be compatible with the other nb_iter computations in loop-iv. This also allows the representation of nb_iters that are equal to MAX_INT. */ if (TREE_CODE (res) == INTEGER_CST && (TREE_INT_CST_LOW (res) == 0 || TREE_OVERFLOW (res))) res = chrec_dont_know; if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, " (set_nb_iterations_in_loop = "); print_generic_expr (dump_file, res, 0); fprintf (dump_file, "))\n"); } loop->nb_iterations = res; return res; } /* This section selects the loops that will be good candidates for the scalar evolution analysis. For the moment, greedily select all the loop nests we could analyze. */ /* Return true when it is possible to analyze the condition expression EXPR. */ static bool analyzable_condition (tree expr) { tree condition; if (TREE_CODE (expr) != COND_EXPR) return false; condition = TREE_OPERAND (expr, 0); switch (TREE_CODE (condition)) { case SSA_NAME: return true; case LT_EXPR: case LE_EXPR: case GT_EXPR: case GE_EXPR: case EQ_EXPR: case NE_EXPR: return true; default: return false; } return false; } /* For a loop with a single exit edge, return the COND_EXPR that guards the exit edge. If the expression is too difficult to analyze, then give up. */ tree get_loop_exit_condition (struct loop *loop) { tree res = NULL_TREE; edge exit_edge = loop->single_exit; if (dump_file && (dump_flags & TDF_DETAILS)) fprintf (dump_file, "(get_loop_exit_condition \n "); if (exit_edge) { tree expr; expr = last_stmt (exit_edge->src); if (analyzable_condition (expr)) res = expr; } if (dump_file && (dump_flags & TDF_DETAILS)) { print_generic_expr (dump_file, res, 0); fprintf (dump_file, ")\n"); } return res; } /* Recursively determine and enqueue the exit conditions for a loop. */ static void get_exit_conditions_rec (struct loop *loop, VEC(tree,heap) **exit_conditions) { if (!loop) return; /* Recurse on the inner loops, then on the next (sibling) loops. */ get_exit_conditions_rec (loop->inner, exit_conditions); get_exit_conditions_rec (loop->next, exit_conditions); if (loop->single_exit) { tree loop_condition = get_loop_exit_condition (loop); if (loop_condition) VEC_safe_push (tree, heap, *exit_conditions, loop_condition); } } /* Select the candidate loop nests for the analysis. This function initializes the EXIT_CONDITIONS array. */ static void select_loops_exit_conditions (struct loops *loops, VEC(tree,heap) **exit_conditions) { struct loop *function_body = loops->parray[0]; get_exit_conditions_rec (function_body->inner, exit_conditions); } /* Depth first search algorithm. */ typedef enum t_bool { t_false, t_true, t_dont_know } t_bool; static t_bool follow_ssa_edge (struct loop *loop, tree, tree, tree *, int); /* Follow the ssa edge into the right hand side RHS of an assignment. Return true if the strongly connected component has been found. */ static t_bool follow_ssa_edge_in_rhs (struct loop *loop, tree at_stmt, tree rhs, tree halting_phi, tree *evolution_of_loop, int limit) { t_bool res = t_false; tree rhs0, rhs1; tree type_rhs = TREE_TYPE (rhs); tree evol; /* The RHS is one of the following cases: - an SSA_NAME, - an INTEGER_CST, - a PLUS_EXPR, - a MINUS_EXPR, - an ASSERT_EXPR, - other cases are not yet handled. */ switch (TREE_CODE (rhs)) { case NOP_EXPR: /* This assignment is under the form "a_1 = (cast) rhs. */ res = follow_ssa_edge_in_rhs (loop, at_stmt, TREE_OPERAND (rhs, 0), halting_phi, evolution_of_loop, limit); *evolution_of_loop = chrec_convert (TREE_TYPE (rhs), *evolution_of_loop, at_stmt); break; case INTEGER_CST: /* This assignment is under the form "a_1 = 7". */ res = t_false; break; case SSA_NAME: /* This assignment is under the form: "a_1 = b_2". */ res = follow_ssa_edge (loop, SSA_NAME_DEF_STMT (rhs), halting_phi, evolution_of_loop, limit); break; case PLUS_EXPR: /* This case is under the form "rhs0 + rhs1". */ rhs0 = TREE_OPERAND (rhs, 0); rhs1 = TREE_OPERAND (rhs, 1); STRIP_TYPE_NOPS (rhs0); STRIP_TYPE_NOPS (rhs1); if (TREE_CODE (rhs0) == SSA_NAME) { if (TREE_CODE (rhs1) == SSA_NAME) { /* Match an assignment under the form: "a = b + c". */ evol = *evolution_of_loop; res = follow_ssa_edge (loop, SSA_NAME_DEF_STMT (rhs0), halting_phi, &evol, limit); if (res == t_true) *evolution_of_loop = add_to_evolution (loop->num, chrec_convert (type_rhs, evol, at_stmt), PLUS_EXPR, rhs1, at_stmt); else if (res == t_false) { res = follow_ssa_edge (loop, SSA_NAME_DEF_STMT (rhs1), halting_phi, evolution_of_loop, limit); if (res == t_true) *evolution_of_loop = add_to_evolution (loop->num, chrec_convert (type_rhs, *evolution_of_loop, at_stmt), PLUS_EXPR, rhs0, at_stmt); else if (res == t_dont_know) *evolution_of_loop = chrec_dont_know; } else if (res == t_dont_know) *evolution_of_loop = chrec_dont_know; } else { /* Match an assignment under the form: "a = b + ...". */ res = follow_ssa_edge (loop, SSA_NAME_DEF_STMT (rhs0), halting_phi, evolution_of_loop, limit); if (res == t_true) *evolution_of_loop = add_to_evolution (loop->num, chrec_convert (type_rhs, *evolution_of_loop, at_stmt), PLUS_EXPR, rhs1, at_stmt); else if (res == t_dont_know) *evolution_of_loop = chrec_dont_know; } } else if (TREE_CODE (rhs1) == SSA_NAME) { /* Match an assignment under the form: "a = ... + c". */ res = follow_ssa_edge (loop, SSA_NAME_DEF_STMT (rhs1), halting_phi, evolution_of_loop, limit); if (res == t_true) *evolution_of_loop = add_to_evolution (loop->num, chrec_convert (type_rhs, *evolution_of_loop, at_stmt), PLUS_EXPR, rhs0, at_stmt); else if (res == t_dont_know) *evolution_of_loop = chrec_dont_know; } else /* Otherwise, match an assignment under the form: "a = ... + ...". */ /* And there is nothing to do. */ res = t_false; break; case MINUS_EXPR: /* This case is under the form "opnd0 = rhs0 - rhs1". */ rhs0 = TREE_OPERAND (rhs, 0); rhs1 = TREE_OPERAND (rhs, 1); STRIP_TYPE_NOPS (rhs0); STRIP_TYPE_NOPS (rhs1); if (TREE_CODE (rhs0) == SSA_NAME) { /* Match an assignment under the form: "a = b - ...". */ res = follow_ssa_edge (loop, SSA_NAME_DEF_STMT (rhs0), halting_phi, evolution_of_loop, limit); if (res == t_true) *evolution_of_loop = add_to_evolution (loop->num, chrec_convert (type_rhs, *evolution_of_loop, at_stmt), MINUS_EXPR, rhs1, at_stmt); else if (res == t_dont_know) *evolution_of_loop = chrec_dont_know; } else /* Otherwise, match an assignment under the form: "a = ... - ...". */ /* And there is nothing to do. */ res = t_false; break; case ASSERT_EXPR: { /* This assignment is of the form: "a_1 = ASSERT_EXPR <a_2, ...>" It must be handled as a copy assignment of the form a_1 = a_2. */ tree op0 = ASSERT_EXPR_VAR (rhs); if (TREE_CODE (op0) == SSA_NAME) res = follow_ssa_edge (loop, SSA_NAME_DEF_STMT (op0), halting_phi, evolution_of_loop, limit); else res = t_false; break; } default: res = t_false; break; } return res; } /* Checks whether the I-th argument of a PHI comes from a backedge. */ static bool backedge_phi_arg_p (tree phi, int i) { edge e = PHI_ARG_EDGE (phi, i); /* We would in fact like to test EDGE_DFS_BACK here, but we do not care about updating it anywhere, and this should work as well most of the time. */ if (e->flags & EDGE_IRREDUCIBLE_LOOP) return true; return false; } /* Helper function for one branch of the condition-phi-node. Return true if the strongly connected component has been found following this path. */ static inline t_bool follow_ssa_edge_in_condition_phi_branch (int i, struct loop *loop, tree condition_phi, tree halting_phi, tree *evolution_of_branch, tree init_cond, int limit) { tree branch = PHI_ARG_DEF (condition_phi, i); *evolution_of_branch = chrec_dont_know; /* Do not follow back edges (they must belong to an irreducible loop, which we really do not want to worry about). */ if (backedge_phi_arg_p (condition_phi, i)) return t_false; if (TREE_CODE (branch) == SSA_NAME) { *evolution_of_branch = init_cond; return follow_ssa_edge (loop, SSA_NAME_DEF_STMT (branch), halting_phi, evolution_of_branch, limit); } /* This case occurs when one of the condition branches sets the variable to a constant: i.e. a phi-node like "a_2 = PHI <a_7(5), 2(6)>;". FIXME: This case have to be refined correctly: in some cases it is possible to say something better than chrec_dont_know, for example using a wrap-around notation. */ return t_false; } /* This function merges the branches of a condition-phi-node in a loop. */ static t_bool follow_ssa_edge_in_condition_phi (struct loop *loop, tree condition_phi, tree halting_phi, tree *evolution_of_loop, int limit) { int i; tree init = *evolution_of_loop; tree evolution_of_branch; t_bool res = follow_ssa_edge_in_condition_phi_branch (0, loop, condition_phi, halting_phi, &evolution_of_branch, init, limit); if (res == t_false || res == t_dont_know) return res; *evolution_of_loop = evolution_of_branch; for (i = 1; i < PHI_NUM_ARGS (condition_phi); i++) { /* Quickly give up when the evolution of one of the branches is not known. */ if (*evolution_of_loop == chrec_dont_know) return t_true; res = follow_ssa_edge_in_condition_phi_branch (i, loop, condition_phi, halting_phi, &evolution_of_branch, init, limit); if (res == t_false || res == t_dont_know) return res; *evolution_of_loop = chrec_merge (*evolution_of_loop, evolution_of_branch); } return t_true; } /* Follow an SSA edge in an inner loop. It computes the overall effect of the loop, and following the symbolic initial conditions, it follows the edges in the parent loop. The inner loop is considered as a single statement. */ static t_bool follow_ssa_edge_inner_loop_phi (struct loop *outer_loop, tree loop_phi_node, tree halting_phi, tree *evolution_of_loop, int limit) { struct loop *loop = loop_containing_stmt (loop_phi_node); tree ev = analyze_scalar_evolution (loop, PHI_RESULT (loop_phi_node)); /* Sometimes, the inner loop is too difficult to analyze, and the result of the analysis is a symbolic parameter. */ if (ev == PHI_RESULT (loop_phi_node)) { t_bool res = t_false; int i; for (i = 0; i < PHI_NUM_ARGS (loop_phi_node); i++) { tree arg = PHI_ARG_DEF (loop_phi_node, i); basic_block bb; /* Follow the edges that exit the inner loop. */ bb = PHI_ARG_EDGE (loop_phi_node, i)->src; if (!flow_bb_inside_loop_p (loop, bb)) res = follow_ssa_edge_in_rhs (outer_loop, loop_phi_node, arg, halting_phi, evolution_of_loop, limit); if (res == t_true) break; } /* If the path crosses this loop-phi, give up. */ if (res == t_true) *evolution_of_loop = chrec_dont_know; return res; } /* Otherwise, compute the overall effect of the inner loop. */ ev = compute_overall_effect_of_inner_loop (loop, ev); return follow_ssa_edge_in_rhs (outer_loop, loop_phi_node, ev, halting_phi, evolution_of_loop, limit); } /* Follow an SSA edge from a loop-phi-node to itself, constructing a path that is analyzed on the return walk. */ static t_bool follow_ssa_edge (struct loop *loop, tree def, tree halting_phi, tree *evolution_of_loop, int limit) { struct loop *def_loop; if (TREE_CODE (def) == NOP_EXPR) return t_false; /* Give up if the path is longer than the MAX that we allow. */ if (limit++ > PARAM_VALUE (PARAM_SCEV_MAX_EXPR_SIZE)) return t_dont_know; def_loop = loop_containing_stmt (def); switch (TREE_CODE (def)) { case PHI_NODE: if (!loop_phi_node_p (def)) /* DEF is a condition-phi-node. Follow the branches, and record their evolutions. Finally, merge the collected information and set the approximation to the main variable. */ return follow_ssa_edge_in_condition_phi (loop, def, halting_phi, evolution_of_loop, limit); /* When the analyzed phi is the halting_phi, the depth-first search is over: we have found a path from the halting_phi to itself in the loop. */ if (def == halting_phi) return t_true; /* Otherwise, the evolution of the HALTING_PHI depends on the evolution of another loop-phi-node, i.e. the evolution function is a higher degree polynomial. */ if (def_loop == loop) return t_false; /* Inner loop. */ if (flow_loop_nested_p (loop, def_loop)) return follow_ssa_edge_inner_loop_phi (loop, def, halting_phi, evolution_of_loop, limit); /* Outer loop. */ return t_false; case MODIFY_EXPR: return follow_ssa_edge_in_rhs (loop, def, TREE_OPERAND (def, 1), halting_phi, evolution_of_loop, limit); default: /* At this level of abstraction, the program is just a set of MODIFY_EXPRs and PHI_NODEs. In principle there is no other node to be handled. */ return t_false; } } /* Given a LOOP_PHI_NODE, this function determines the evolution function from LOOP_PHI_NODE to LOOP_PHI_NODE in the loop. */ static tree analyze_evolution_in_loop (tree loop_phi_node, tree init_cond) { int i; tree evolution_function = chrec_not_analyzed_yet; struct loop *loop = loop_containing_stmt (loop_phi_node); basic_block bb; if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, "(analyze_evolution_in_loop \n"); fprintf (dump_file, " (loop_phi_node = "); print_generic_expr (dump_file, loop_phi_node, 0); fprintf (dump_file, ")\n"); } for (i = 0; i < PHI_NUM_ARGS (loop_phi_node); i++) { tree arg = PHI_ARG_DEF (loop_phi_node, i); tree ssa_chain, ev_fn; t_bool res; /* Select the edges that enter the loop body. */ bb = PHI_ARG_EDGE (loop_phi_node, i)->src; if (!flow_bb_inside_loop_p (loop, bb)) continue; if (TREE_CODE (arg) == SSA_NAME) { ssa_chain = SSA_NAME_DEF_STMT (arg); /* Pass in the initial condition to the follow edge function. */ ev_fn = init_cond; res = follow_ssa_edge (loop, ssa_chain, loop_phi_node, &ev_fn, 0); } else res = t_false; /* When it is impossible to go back on the same loop_phi_node by following the ssa edges, the evolution is represented by a peeled chrec, i.e. the first iteration, EV_FN has the value INIT_COND, then all the other iterations it has the value of ARG. For the moment, PEELED_CHREC nodes are not built. */ if (res != t_true) ev_fn = chrec_dont_know; /* When there are multiple back edges of the loop (which in fact never happens currently, but nevertheless), merge their evolutions. */ evolution_function = chrec_merge (evolution_function, ev_fn); } if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, " (evolution_function = "); print_generic_expr (dump_file, evolution_function, 0); fprintf (dump_file, "))\n"); } return evolution_function; } /* Given a loop-phi-node, return the initial conditions of the variable on entry of the loop. When the CCP has propagated constants into the loop-phi-node, the initial condition is instantiated, otherwise the initial condition is kept symbolic. This analyzer does not analyze the evolution outside the current loop, and leaves this task to the on-demand tree reconstructor. */ static tree analyze_initial_condition (tree loop_phi_node) { int i; tree init_cond = chrec_not_analyzed_yet; struct loop *loop = bb_for_stmt (loop_phi_node)->loop_father; if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, "(analyze_initial_condition \n"); fprintf (dump_file, " (loop_phi_node = \n"); print_generic_expr (dump_file, loop_phi_node, 0); fprintf (dump_file, ")\n"); } for (i = 0; i < PHI_NUM_ARGS (loop_phi_node); i++) { tree branch = PHI_ARG_DEF (loop_phi_node, i); basic_block bb = PHI_ARG_EDGE (loop_phi_node, i)->src; /* When the branch is oriented to the loop's body, it does not contribute to the initial condition. */ if (flow_bb_inside_loop_p (loop, bb)) continue; if (init_cond == chrec_not_analyzed_yet) { init_cond = branch; continue; } if (TREE_CODE (branch) == SSA_NAME) { init_cond = chrec_dont_know; break; } init_cond = chrec_merge (init_cond, branch); } /* Ooops -- a loop without an entry??? */ if (init_cond == chrec_not_analyzed_yet) init_cond = chrec_dont_know; if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, " (init_cond = "); print_generic_expr (dump_file, init_cond, 0); fprintf (dump_file, "))\n"); } return init_cond; } /* Analyze the scalar evolution for LOOP_PHI_NODE. */ static tree interpret_loop_phi (struct loop *loop, tree loop_phi_node) { tree res; struct loop *phi_loop = loop_containing_stmt (loop_phi_node); tree init_cond; if (phi_loop != loop) { struct loop *subloop; tree evolution_fn = analyze_scalar_evolution (phi_loop, PHI_RESULT (loop_phi_node)); /* Dive one level deeper. */ subloop = superloop_at_depth (phi_loop, loop->depth + 1); /* Interpret the subloop. */ res = compute_overall_effect_of_inner_loop (subloop, evolution_fn); return res; } /* Otherwise really interpret the loop phi. */ init_cond = analyze_initial_condition (loop_phi_node); res = analyze_evolution_in_loop (loop_phi_node, init_cond); return res; } /* This function merges the branches of a condition-phi-node, contained in the outermost loop, and whose arguments are already analyzed. */ static tree interpret_condition_phi (struct loop *loop, tree condition_phi) { int i; tree res = chrec_not_analyzed_yet; for (i = 0; i < PHI_NUM_ARGS (condition_phi); i++) { tree branch_chrec; if (backedge_phi_arg_p (condition_phi, i)) { res = chrec_dont_know; break; } branch_chrec = analyze_scalar_evolution (loop, PHI_ARG_DEF (condition_phi, i)); res = chrec_merge (res, branch_chrec); } return res; } /* Interpret the right hand side of a modify_expr OPND1. If we didn't analyze this node before, follow the definitions until ending either on an analyzed modify_expr, or on a loop-phi-node. On the return path, this function propagates evolutions (ala constant copy propagation). OPND1 is not a GIMPLE expression because we could analyze the effect of an inner loop: see interpret_loop_phi. */ static tree interpret_rhs_modify_expr (struct loop *loop, tree at_stmt, tree opnd1, tree type) { tree res, opnd10, opnd11, chrec10, chrec11; if (is_gimple_min_invariant (opnd1)) return chrec_convert (type, opnd1, at_stmt); switch (TREE_CODE (opnd1)) { case PLUS_EXPR: opnd10 = TREE_OPERAND (opnd1, 0); opnd11 = TREE_OPERAND (opnd1, 1); chrec10 = analyze_scalar_evolution (loop, opnd10); chrec11 = analyze_scalar_evolution (loop, opnd11); chrec10 = chrec_convert (type, chrec10, at_stmt); chrec11 = chrec_convert (type, chrec11, at_stmt); res = chrec_fold_plus (type, chrec10, chrec11); break; case MINUS_EXPR: opnd10 = TREE_OPERAND (opnd1, 0); opnd11 = TREE_OPERAND (opnd1, 1); chrec10 = analyze_scalar_evolution (loop, opnd10); chrec11 = analyze_scalar_evolution (loop, opnd11); chrec10 = chrec_convert (type, chrec10, at_stmt); chrec11 = chrec_convert (type, chrec11, at_stmt); res = chrec_fold_minus (type, chrec10, chrec11); break; case NEGATE_EXPR: opnd10 = TREE_OPERAND (opnd1, 0); chrec10 = analyze_scalar_evolution (loop, opnd10); chrec10 = chrec_convert (type, chrec10, at_stmt); /* TYPE may be integer, real or complex, so use fold_convert. */ res = chrec_fold_multiply (type, chrec10, fold_convert (type, integer_minus_one_node)); break; case MULT_EXPR: opnd10 = TREE_OPERAND (opnd1, 0); opnd11 = TREE_OPERAND (opnd1, 1); chrec10 = analyze_scalar_evolution (loop, opnd10); chrec11 = analyze_scalar_evolution (loop, opnd11); chrec10 = chrec_convert (type, chrec10, at_stmt); chrec11 = chrec_convert (type, chrec11, at_stmt); res = chrec_fold_multiply (type, chrec10, chrec11); break; case SSA_NAME: res = chrec_convert (type, analyze_scalar_evolution (loop, opnd1), at_stmt); break; case ASSERT_EXPR: opnd10 = ASSERT_EXPR_VAR (opnd1); res = chrec_convert (type, analyze_scalar_evolution (loop, opnd10), at_stmt); break; case NOP_EXPR: case CONVERT_EXPR: opnd10 = TREE_OPERAND (opnd1, 0); chrec10 = analyze_scalar_evolution (loop, opnd10); res = chrec_convert (type, chrec10, at_stmt); break; default: res = chrec_dont_know; break; } return res; } /* This section contains all the entry points: - number_of_iterations_in_loop, - analyze_scalar_evolution, - instantiate_parameters. */ /* Compute and return the evolution function in WRTO_LOOP, the nearest common ancestor of DEF_LOOP and USE_LOOP. */ static tree compute_scalar_evolution_in_loop (struct loop *wrto_loop, struct loop *def_loop, tree ev) { tree res; if (def_loop == wrto_loop) return ev; def_loop = superloop_at_depth (def_loop, wrto_loop->depth + 1); res = compute_overall_effect_of_inner_loop (def_loop, ev); return analyze_scalar_evolution_1 (wrto_loop, res, chrec_not_analyzed_yet); } /* Folds EXPR, if it is a cast to pointer, assuming that the created polynomial_chrec does not wrap. */ static tree fold_used_pointer_cast (tree expr) { tree op; tree type, inner_type; if (TREE_CODE (expr) != NOP_EXPR && TREE_CODE (expr) != CONVERT_EXPR) return expr; op = TREE_OPERAND (expr, 0); if (TREE_CODE (op) != POLYNOMIAL_CHREC) return expr; type = TREE_TYPE (expr); inner_type = TREE_TYPE (op); if (!INTEGRAL_TYPE_P (inner_type) || TYPE_PRECISION (inner_type) != TYPE_PRECISION (type)) return expr; return build_polynomial_chrec (CHREC_VARIABLE (op), chrec_convert (type, CHREC_LEFT (op), NULL_TREE), chrec_convert (type, CHREC_RIGHT (op), NULL_TREE)); } /* Returns true if EXPR is an expression corresponding to offset of pointer in p + offset. */ static bool pointer_offset_p (tree expr) { if (TREE_CODE (expr) == INTEGER_CST) return true; if ((TREE_CODE (expr) == NOP_EXPR || TREE_CODE (expr) == CONVERT_EXPR) && INTEGRAL_TYPE_P (TREE_TYPE (TREE_OPERAND (expr, 0)))) return true; return false; } /* EXPR is a scalar evolution of a pointer that is dereferenced or used in comparison. This means that it must point to a part of some object in memory, which enables us to argue about overflows and possibly simplify the EXPR. AT_STMT is the statement in which this conversion has to be performed. Returns the simplified value. Currently, for int i, n; int *p; for (i = -n; i < n; i++) *(p + i) = ...; We generate the following code (assuming that size of int and size_t is 4 bytes): for (i = -n; i < n; i++) { size_t tmp1, tmp2; int *tmp3, *tmp4; tmp1 = (size_t) i; (1) tmp2 = 4 * tmp1; (2) tmp3 = (int *) tmp2; (3) tmp4 = p + tmp3; (4) *tmp4 = ...; } We in general assume that pointer arithmetics does not overflow (since its behavior is undefined in that case). One of the problems is that our translation does not capture this property very well -- (int *) is considered unsigned, hence the computation in (4) does overflow if i is negative. This impreciseness creates complications in scev analysis. The scalar evolution of i is [-n, +, 1]. Since int and size_t have the same precision (in this example), and size_t is unsigned (so we do not care about overflows), we succeed to derive that scev of tmp1 is [(size_t) -n, +, 1] and scev of tmp2 is [4 * (size_t) -n, +, 4]. With tmp3, we run into problem -- [(int *) (4 * (size_t) -n), +, 4] wraps, and since we on several places assume that this is not the case for scevs with pointer type, we cannot use this scev for tmp3; hence, its scev is (int *) [(4 * (size_t) -n), +, 4], and scev of tmp4 is p + (int *) [(4 * (size_t) -n), +, 4]. Most of the optimizers are unable to work with scevs of this shape. However, since tmp4 is dereferenced, all its values must belong to a single object, and taking into account that the precision of int * and size_t is the same, it is impossible for its scev to wrap. Hence, we can derive that its evolution is [p + (int *) (4 * (size_t) -n), +, 4], which the optimizers can work with. ??? Maybe we should use different representation for pointer arithmetics, however that is a long-term project with a lot of potential for creating bugs. */ static tree fold_used_pointer (tree expr, tree at_stmt) { tree op0, op1, new0, new1; enum tree_code code = TREE_CODE (expr); if (code == PLUS_EXPR || code == MINUS_EXPR) { op0 = TREE_OPERAND (expr, 0); op1 = TREE_OPERAND (expr, 1); if (pointer_offset_p (op1)) { new0 = fold_used_pointer (op0, at_stmt); new1 = fold_used_pointer_cast (op1); } else if (code == PLUS_EXPR && pointer_offset_p (op0)) { new0 = fold_used_pointer_cast (op0); new1 = fold_used_pointer (op1, at_stmt); } else return expr; if (new0 == op0 && new1 == op1) return expr; new0 = chrec_convert (TREE_TYPE (expr), new0, at_stmt); new1 = chrec_convert (TREE_TYPE (expr), new1, at_stmt); if (code == PLUS_EXPR) expr = chrec_fold_plus (TREE_TYPE (expr), new0, new1); else expr = chrec_fold_minus (TREE_TYPE (expr), new0, new1); return expr; } else return fold_used_pointer_cast (expr); } /* Returns true if PTR is dereferenced, or used in comparison. */ static bool pointer_used_p (tree ptr) { use_operand_p use_p; imm_use_iterator imm_iter; tree stmt, rhs; struct ptr_info_def *pi = get_ptr_info (ptr); var_ann_t v_ann = var_ann (SSA_NAME_VAR (ptr)); /* Check whether the pointer has a memory tag; if it does, it is (or at least used to be) dereferenced. */ if ((pi != NULL && pi->name_mem_tag != NULL) || v_ann->symbol_mem_tag) return true; FOR_EACH_IMM_USE_FAST (use_p, imm_iter, ptr) { stmt = USE_STMT (use_p); if (TREE_CODE (stmt) == COND_EXPR) return true; if (TREE_CODE (stmt) != MODIFY_EXPR) continue; rhs = TREE_OPERAND (stmt, 1); if (!COMPARISON_CLASS_P (rhs)) continue; if (TREE_OPERAND (stmt, 0) == ptr || TREE_OPERAND (stmt, 1) == ptr) return true; } return false; } /* Helper recursive function. */ static tree analyze_scalar_evolution_1 (struct loop *loop, tree var, tree res) { tree def, type = TREE_TYPE (var); basic_block bb; struct loop *def_loop; if (loop == NULL || TREE_CODE (type) == VECTOR_TYPE) return chrec_dont_know; if (TREE_CODE (var) != SSA_NAME) return interpret_rhs_modify_expr (loop, NULL_TREE, var, type); def = SSA_NAME_DEF_STMT (var); bb = bb_for_stmt (def); def_loop = bb ? bb->loop_father : NULL; if (bb == NULL || !flow_bb_inside_loop_p (loop, bb)) { /* Keep the symbolic form. */ res = var; goto set_and_end; } if (res != chrec_not_analyzed_yet) { if (loop != bb->loop_father) res = compute_scalar_evolution_in_loop (find_common_loop (loop, bb->loop_father), bb->loop_father, res); goto set_and_end; } if (loop != def_loop) { res = analyze_scalar_evolution_1 (def_loop, var, chrec_not_analyzed_yet); res = compute_scalar_evolution_in_loop (loop, def_loop, res); goto set_and_end; } switch (TREE_CODE (def)) { case MODIFY_EXPR: res = interpret_rhs_modify_expr (loop, def, TREE_OPERAND (def, 1), type); if (POINTER_TYPE_P (type) && !automatically_generated_chrec_p (res) && pointer_used_p (var)) res = fold_used_pointer (res, def); break; case PHI_NODE: if (loop_phi_node_p (def)) res = interpret_loop_phi (loop, def); else res = interpret_condition_phi (loop, def); break; default: res = chrec_dont_know; break; } set_and_end: /* Keep the symbolic form. */ if (res == chrec_dont_know) res = var; if (loop == def_loop) set_scalar_evolution (var, res); return res; } /* Entry point for the scalar evolution analyzer. Analyzes and returns the scalar evolution of the ssa_name VAR. LOOP_NB is the identifier number of the loop in which the variable is used. Example of use: having a pointer VAR to a SSA_NAME node, STMT a pointer to the statement that uses this variable, in order to determine the evolution function of the variable, use the following calls: unsigned loop_nb = loop_containing_stmt (stmt)->num; tree chrec_with_symbols = analyze_scalar_evolution (loop_nb, var); tree chrec_instantiated = instantiate_parameters (loop_nb, chrec_with_symbols); */ tree analyze_scalar_evolution (struct loop *loop, tree var) { tree res; if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, "(analyze_scalar_evolution \n"); fprintf (dump_file, " (loop_nb = %d)\n", loop->num); fprintf (dump_file, " (scalar = "); print_generic_expr (dump_file, var, 0); fprintf (dump_file, ")\n"); } res = analyze_scalar_evolution_1 (loop, var, get_scalar_evolution (var)); if (TREE_CODE (var) == SSA_NAME && res == chrec_dont_know) res = var; if (dump_file && (dump_flags & TDF_DETAILS)) fprintf (dump_file, ")\n"); return res; } /* Analyze scalar evolution of use of VERSION in USE_LOOP with respect to WRTO_LOOP (which should be a superloop of both USE_LOOP and definition of VERSION). FOLDED_CASTS is set to true if resolve_mixers used chrec_convert_aggressive (TODO -- not really, we are way too conservative at the moment in order to keep things simple). */ static tree analyze_scalar_evolution_in_loop (struct loop *wrto_loop, struct loop *use_loop, tree version, bool *folded_casts) { bool val = false; tree ev = version, tmp; if (folded_casts) *folded_casts = false; while (1) { tmp = analyze_scalar_evolution (use_loop, ev); ev = resolve_mixers (use_loop, tmp); if (folded_casts && tmp != ev) *folded_casts = true; if (use_loop == wrto_loop) return ev; /* If the value of the use changes in the inner loop, we cannot express its value in the outer loop (we might try to return interval chrec, but we do not have a user for it anyway) */ if (!no_evolution_in_loop_p (ev, use_loop->num, &val) || !val) return chrec_dont_know; use_loop = use_loop->outer; } } /* Returns instantiated value for VERSION in CACHE. */ static tree get_instantiated_value (htab_t cache, tree version) { struct scev_info_str *info, pattern; pattern.var = version; info = (struct scev_info_str *) htab_find (cache, &pattern); if (info) return info->chrec; else return NULL_TREE; } /* Sets instantiated value for VERSION to VAL in CACHE. */ static void set_instantiated_value (htab_t cache, tree version, tree val) { struct scev_info_str *info, pattern; PTR *slot; pattern.var = version; slot = htab_find_slot (cache, &pattern, INSERT); if (!*slot) *slot = new_scev_info_str (version); info = (struct scev_info_str *) *slot; info->chrec = val; } /* Return the closed_loop_phi node for VAR. If there is none, return NULL_TREE. */ static tree loop_closed_phi_def (tree var) { struct loop *loop; edge exit; tree phi; if (var == NULL_TREE || TREE_CODE (var) != SSA_NAME) return NULL_TREE; loop = loop_containing_stmt (SSA_NAME_DEF_STMT (var)); exit = loop->single_exit; if (!exit) return NULL_TREE; for (phi = phi_nodes (exit->dest); phi; phi = PHI_CHAIN (phi)) if (PHI_ARG_DEF_FROM_EDGE (phi, exit) == var) return PHI_RESULT (phi); return NULL_TREE; } /* Analyze all the parameters of the chrec that were left under a symbolic form, with respect to LOOP. CHREC is the chrec to instantiate. CACHE is the cache of already instantiated values. FLAGS modify the way chrecs are instantiated. SIZE_EXPR is used for computing the size of the expression to be instantiated, and to stop if it exceeds some limit. */ /* Values for FLAGS. */ enum { INSERT_SUPERLOOP_CHRECS = 1, /* Loop invariants are replaced with chrecs in outer loops. */ FOLD_CONVERSIONS = 2 /* The conversions that may wrap in signed/pointer type are folded, as long as the value of the chrec is preserved. */ }; static tree instantiate_parameters_1 (struct loop *loop, tree chrec, int flags, htab_t cache, int size_expr) { tree res, op0, op1, op2; basic_block def_bb; struct loop *def_loop; tree type = chrec_type (chrec); /* Give up if the expression is larger than the MAX that we allow. */ if (size_expr++ > PARAM_VALUE (PARAM_SCEV_MAX_EXPR_SIZE)) return chrec_dont_know; if (automatically_generated_chrec_p (chrec) || is_gimple_min_invariant (chrec)) return chrec; switch (TREE_CODE (chrec)) { case SSA_NAME: def_bb = bb_for_stmt (SSA_NAME_DEF_STMT (chrec)); /* A parameter (or loop invariant and we do not want to include evolutions in outer loops), nothing to do. */ if (!def_bb || (!(flags & INSERT_SUPERLOOP_CHRECS) && !flow_bb_inside_loop_p (loop, def_bb))) return chrec; /* We cache the value of instantiated variable to avoid exponential time complexity due to reevaluations. We also store the convenient value in the cache in order to prevent infinite recursion -- we do not want to instantiate the SSA_NAME if it is in a mixer structure. This is used for avoiding the instantiation of recursively defined functions, such as: | a_2 -> {0, +, 1, +, a_2}_1 */ res = get_instantiated_value (cache, chrec); if (res) return res; /* Store the convenient value for chrec in the structure. If it is defined outside of the loop, we may just leave it in symbolic form, otherwise we need to admit that we do not know its behavior inside the loop. */ res = !flow_bb_inside_loop_p (loop, def_bb) ? chrec : chrec_dont_know; set_instantiated_value (cache, chrec, res); /* To make things even more complicated, instantiate_parameters_1 calls analyze_scalar_evolution that may call # of iterations analysis that may in turn call instantiate_parameters_1 again. To prevent the infinite recursion, keep also the bitmap of ssa names that are being instantiated globally. */ if (bitmap_bit_p (already_instantiated, SSA_NAME_VERSION (chrec))) return res; def_loop = find_common_loop (loop, def_bb->loop_father); /* If the analysis yields a parametric chrec, instantiate the result again. */ bitmap_set_bit (already_instantiated, SSA_NAME_VERSION (chrec)); res = analyze_scalar_evolution (def_loop, chrec); /* Don't instantiate loop-closed-ssa phi nodes. */ if (TREE_CODE (res) == SSA_NAME && (loop_containing_stmt (SSA_NAME_DEF_STMT (res)) == NULL || (loop_containing_stmt (SSA_NAME_DEF_STMT (res))->depth > def_loop->depth))) { if (res == chrec) res = loop_closed_phi_def (chrec); else res = chrec; if (res == NULL_TREE) res = chrec_dont_know; } else if (res != chrec_dont_know) res = instantiate_parameters_1 (loop, res, flags, cache, size_expr); bitmap_clear_bit (already_instantiated, SSA_NAME_VERSION (chrec)); /* Store the correct value to the cache. */ set_instantiated_value (cache, chrec, res); return res; case POLYNOMIAL_CHREC: op0 = instantiate_parameters_1 (loop, CHREC_LEFT (chrec), flags, cache, size_expr); if (op0 == chrec_dont_know) return chrec_dont_know; op1 = instantiate_parameters_1 (loop, CHREC_RIGHT (chrec), flags, cache, size_expr); if (op1 == chrec_dont_know) return chrec_dont_know; if (CHREC_LEFT (chrec) != op0 || CHREC_RIGHT (chrec) != op1) { op1 = chrec_convert (chrec_type (op0), op1, NULL_TREE); chrec = build_polynomial_chrec (CHREC_VARIABLE (chrec), op0, op1); } return chrec; case PLUS_EXPR: op0 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 0), flags, cache, size_expr); if (op0 == chrec_dont_know) return chrec_dont_know; op1 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 1), flags, cache, size_expr); if (op1 == chrec_dont_know) return chrec_dont_know; if (TREE_OPERAND (chrec, 0) != op0 || TREE_OPERAND (chrec, 1) != op1) { op0 = chrec_convert (type, op0, NULL_TREE); op1 = chrec_convert (type, op1, NULL_TREE); chrec = chrec_fold_plus (type, op0, op1); } return chrec; case MINUS_EXPR: op0 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 0), flags, cache, size_expr); if (op0 == chrec_dont_know) return chrec_dont_know; op1 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 1), flags, cache, size_expr); if (op1 == chrec_dont_know) return chrec_dont_know; if (TREE_OPERAND (chrec, 0) != op0 || TREE_OPERAND (chrec, 1) != op1) { op0 = chrec_convert (type, op0, NULL_TREE); op1 = chrec_convert (type, op1, NULL_TREE); chrec = chrec_fold_minus (type, op0, op1); } return chrec; case MULT_EXPR: op0 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 0), flags, cache, size_expr); if (op0 == chrec_dont_know) return chrec_dont_know; op1 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 1), flags, cache, size_expr); if (op1 == chrec_dont_know) return chrec_dont_know; if (TREE_OPERAND (chrec, 0) != op0 || TREE_OPERAND (chrec, 1) != op1) { op0 = chrec_convert (type, op0, NULL_TREE); op1 = chrec_convert (type, op1, NULL_TREE); chrec = chrec_fold_multiply (type, op0, op1); } return chrec; case NOP_EXPR: case CONVERT_EXPR: case NON_LVALUE_EXPR: op0 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 0), flags, cache, size_expr); if (op0 == chrec_dont_know) return chrec_dont_know; if (flags & FOLD_CONVERSIONS) { tree tmp = chrec_convert_aggressive (TREE_TYPE (chrec), op0); if (tmp) return tmp; } if (op0 == TREE_OPERAND (chrec, 0)) return chrec; /* If we used chrec_convert_aggressive, we can no longer assume that signed chrecs do not overflow, as chrec_convert does, so avoid calling it in that case. */ if (flags & FOLD_CONVERSIONS) return fold_convert (TREE_TYPE (chrec), op0); return chrec_convert (TREE_TYPE (chrec), op0, NULL_TREE); case SCEV_NOT_KNOWN: return chrec_dont_know; case SCEV_KNOWN: return chrec_known; default: break; } switch (TREE_CODE_LENGTH (TREE_CODE (chrec))) { case 3: op0 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 0), flags, cache, size_expr); if (op0 == chrec_dont_know) return chrec_dont_know; op1 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 1), flags, cache, size_expr); if (op1 == chrec_dont_know) return chrec_dont_know; op2 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 2), flags, cache, size_expr); if (op2 == chrec_dont_know) return chrec_dont_know; if (op0 == TREE_OPERAND (chrec, 0) && op1 == TREE_OPERAND (chrec, 1) && op2 == TREE_OPERAND (chrec, 2)) return chrec; return fold_build3 (TREE_CODE (chrec), TREE_TYPE (chrec), op0, op1, op2); case 2: op0 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 0), flags, cache, size_expr); if (op0 == chrec_dont_know) return chrec_dont_know; op1 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 1), flags, cache, size_expr); if (op1 == chrec_dont_know) return chrec_dont_know; if (op0 == TREE_OPERAND (chrec, 0) && op1 == TREE_OPERAND (chrec, 1)) return chrec; return fold_build2 (TREE_CODE (chrec), TREE_TYPE (chrec), op0, op1); case 1: op0 = instantiate_parameters_1 (loop, TREE_OPERAND (chrec, 0), flags, cache, size_expr); if (op0 == chrec_dont_know) return chrec_dont_know; if (op0 == TREE_OPERAND (chrec, 0)) return chrec; return fold_build1 (TREE_CODE (chrec), TREE_TYPE (chrec), op0); case 0: return chrec; default: break; } /* Too complicated to handle. */ return chrec_dont_know; } /* Analyze all the parameters of the chrec that were left under a symbolic form. LOOP is the loop in which symbolic names have to be analyzed and instantiated. */ tree instantiate_parameters (struct loop *loop, tree chrec) { tree res; htab_t cache = htab_create (10, hash_scev_info, eq_scev_info, del_scev_info); if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, "(instantiate_parameters \n"); fprintf (dump_file, " (loop_nb = %d)\n", loop->num); fprintf (dump_file, " (chrec = "); print_generic_expr (dump_file, chrec, 0); fprintf (dump_file, ")\n"); } res = instantiate_parameters_1 (loop, chrec, INSERT_SUPERLOOP_CHRECS, cache, 0); if (dump_file && (dump_flags & TDF_DETAILS)) { fprintf (dump_file, " (res = "); print_generic_expr (dump_file, res, 0); fprintf (dump_file, "))\n"); } htab_delete (cache); return res; } /* Similar to instantiate_parameters, but does not introduce the evolutions in outer loops for LOOP invariants in CHREC, and does not care about causing overflows, as long as they do not affect value of an expression. */ static tree resolve_mixers (struct loop *loop, tree chrec) { htab_t cache = htab_create (10, hash_scev_info, eq_scev_info, del_scev_info); tree ret = instantiate_parameters_1 (loop, chrec, FOLD_CONVERSIONS, cache, 0); htab_delete (cache); return ret; } /* Entry point for the analysis of the number of iterations pass. This function tries to safely approximate the number of iterations the loop will run. When this property is not decidable at compile time, the result is chrec_dont_know. Otherwise the result is a scalar or a symbolic parameter. Example of analysis: suppose that the loop has an exit condition: "if (b > 49) goto end_loop;" and that in a previous analysis we have determined that the variable 'b' has an evolution function: "EF = {23, +, 5}_2". When we evaluate the function at the point 5, i.e. the value of the variable 'b' after 5 iterations in the loop, we have EF (5) = 48, and EF (6) = 53. In this case the value of 'b' on exit is '53' and the loop body has been executed 6 times. */ tree number_of_iterations_in_loop (struct loop *loop) { tree res, type; edge exit; struct tree_niter_desc niter_desc; /* Determine whether the number_of_iterations_in_loop has already been computed. */ res = loop->nb_iterations; if (res) return res; res = chrec_dont_know; if (dump_file && (dump_flags & TDF_DETAILS)) fprintf (dump_file, "(number_of_iterations_in_loop\n"); exit = loop->single_exit; if (!exit) goto end; if (!number_of_iterations_exit (loop, exit, &niter_desc, false)) goto end; type = TREE_TYPE (niter_desc.niter); if (integer_nonzerop (niter_desc.may_be_zero)) res = build_int_cst (type, 0); else if (integer_zerop (niter_desc.may_be_zero)) res = niter_desc.niter; else res = chrec_dont_know; end: return set_nb_iterations_in_loop (loop, res); } /* One of the drivers for testing the scalar evolutions analysis. This function computes the number of iterations for all the loops from the EXIT_CONDITIONS array. */ static void number_of_iterations_for_all_loops (VEC(tree,heap) **exit_conditions) { unsigned int i; unsigned nb_chrec_dont_know_loops = 0; unsigned nb_static_loops = 0; tree cond; for (i = 0; VEC_iterate (tree, *exit_conditions, i, cond); i++) { tree res = number_of_iterations_in_loop (loop_containing_stmt (cond)); if (chrec_contains_undetermined (res)) nb_chrec_dont_know_loops++; else nb_static_loops++; } if (dump_file) { fprintf (dump_file, "\n(\n"); fprintf (dump_file, "-----------------------------------------\n"); fprintf (dump_file, "%d\tnb_chrec_dont_know_loops\n", nb_chrec_dont_know_loops); fprintf (dump_file, "%d\tnb_static_loops\n", nb_static_loops); fprintf (dump_file, "%d\tnb_total_loops\n", current_loops->num); fprintf (dump_file, "-----------------------------------------\n"); fprintf (dump_file, ")\n\n"); print_loop_ir (dump_file); } } /* Counters for the stats. */ struct chrec_stats { unsigned nb_chrecs; unsigned nb_affine; unsigned nb_affine_multivar; unsigned nb_higher_poly; unsigned nb_chrec_dont_know; unsigned nb_undetermined; }; /* Reset the counters. */ static inline void reset_chrecs_counters (struct chrec_stats *stats) { stats->nb_chrecs = 0; stats->nb_affine = 0; stats->nb_affine_multivar = 0; stats->nb_higher_poly = 0; stats->nb_chrec_dont_know = 0; stats->nb_undetermined = 0; } /* Dump the contents of a CHREC_STATS structure. */ static void dump_chrecs_stats (FILE *file, struct chrec_stats *stats) { fprintf (file, "\n(\n"); fprintf (file, "-----------------------------------------\n"); fprintf (file, "%d\taffine univariate chrecs\n", stats->nb_affine); fprintf (file, "%d\taffine multivariate chrecs\n", stats->nb_affine_multivar); fprintf (file, "%d\tdegree greater than 2 polynomials\n", stats->nb_higher_poly); fprintf (file, "%d\tchrec_dont_know chrecs\n", stats->nb_chrec_dont_know); fprintf (file, "-----------------------------------------\n"); fprintf (file, "%d\ttotal chrecs\n", stats->nb_chrecs); fprintf (file, "%d\twith undetermined coefficients\n", stats->nb_undetermined); fprintf (file, "-----------------------------------------\n"); fprintf (file, "%d\tchrecs in the scev database\n", (int) htab_elements (scalar_evolution_info)); fprintf (file, "%d\tsets in the scev database\n", nb_set_scev); fprintf (file, "%d\tgets in the scev database\n", nb_get_scev); fprintf (file, "-----------------------------------------\n"); fprintf (file, ")\n\n"); } /* Gather statistics about CHREC. */ static void gather_chrec_stats (tree chrec, struct chrec_stats *stats) { if (dump_file && (dump_flags & TDF_STATS)) { fprintf (dump_file, "(classify_chrec "); print_generic_expr (dump_file, chrec, 0); fprintf (dump_file, "\n"); } stats->nb_chrecs++; if (chrec == NULL_TREE) { stats->nb_undetermined++; return; } switch (TREE_CODE (chrec)) { case POLYNOMIAL_CHREC: if (evolution_function_is_affine_p (chrec)) { if (dump_file && (dump_flags & TDF_STATS)) fprintf (dump_file, " affine_univariate\n"); stats->nb_affine++; } else if (evolution_function_is_affine_multivariate_p (chrec)) { if (dump_file && (dump_flags & TDF_STATS)) fprintf (dump_file, " affine_multivariate\n"); stats->nb_affine_multivar++; } else { if (dump_file && (dump_flags & TDF_STATS)) fprintf (dump_file, " higher_degree_polynomial\n"); stats->nb_higher_poly++; } break; default: break; } if (chrec_contains_undetermined (chrec)) { if (dump_file && (dump_flags & TDF_STATS)) fprintf (dump_file, " undetermined\n"); stats->nb_undetermined++; } if (dump_file && (dump_flags & TDF_STATS)) fprintf (dump_file, ")\n"); } /* One of the drivers for testing the scalar evolutions analysis. This function analyzes the scalar evolution of all the scalars defined as loop phi nodes in one of the loops from the EXIT_CONDITIONS array. TODO Optimization: A loop is in canonical form if it contains only a single scalar loop phi node. All the other scalars that have an evolution in the loop are rewritten in function of this single index. This allows the parallelization of the loop. */ static void analyze_scalar_evolution_for_all_loop_phi_nodes (VEC(tree,heap) **exit_conditions) { unsigned int i; struct chrec_stats stats; tree cond; reset_chrecs_counters (&stats); for (i = 0; VEC_iterate (tree, *exit_conditions, i, cond); i++) { struct loop *loop; basic_block bb; tree phi, chrec; loop = loop_containing_stmt (cond); bb = loop->header; for (phi = phi_nodes (bb); phi; phi = PHI_CHAIN (phi)) if (is_gimple_reg (PHI_RESULT (phi))) { chrec = instantiate_parameters (loop, analyze_scalar_evolution (loop, PHI_RESULT (phi))); if (dump_file && (dump_flags & TDF_STATS)) gather_chrec_stats (chrec, &stats); } } if (dump_file && (dump_flags & TDF_STATS)) dump_chrecs_stats (dump_file, &stats); } /* Callback for htab_traverse, gathers information on chrecs in the hashtable. */ static int gather_stats_on_scev_database_1 (void **slot, void *stats) { struct scev_info_str *entry = (struct scev_info_str *) *slot; gather_chrec_stats (entry->chrec, (struct chrec_stats *) stats); return 1; } /* Classify the chrecs of the whole database. */ void gather_stats_on_scev_database (void) { struct chrec_stats stats; if (!dump_file) return; reset_chrecs_counters (&stats); htab_traverse (scalar_evolution_info, gather_stats_on_scev_database_1, &stats); dump_chrecs_stats (dump_file, &stats); } /* Initializer. */ static void initialize_scalar_evolutions_analyzer (void) { /* The elements below are unique. */ if (chrec_dont_know == NULL_TREE) { chrec_not_analyzed_yet = NULL_TREE; chrec_dont_know = make_node (SCEV_NOT_KNOWN); chrec_known = make_node (SCEV_KNOWN); TREE_TYPE (chrec_dont_know) = void_type_node; TREE_TYPE (chrec_known) = void_type_node; } } /* Initialize the analysis of scalar evolutions for LOOPS. */ void scev_initialize (struct loops *loops) { unsigned i; current_loops = loops; scalar_evolution_info = htab_create (100, hash_scev_info, eq_scev_info, del_scev_info); already_instantiated = BITMAP_ALLOC (NULL); initialize_scalar_evolutions_analyzer (); for (i = 1; i < loops->num; i++) if (loops->parray[i]) loops->parray[i]->nb_iterations = NULL_TREE; } /* Cleans up the information cached by the scalar evolutions analysis. */ void scev_reset (void) { unsigned i; struct loop *loop; if (!scalar_evolution_info || !current_loops) return; htab_empty (scalar_evolution_info); for (i = 1; i < current_loops->num; i++) { loop = current_loops->parray[i]; if (loop) loop->nb_iterations = NULL_TREE; } } /* Checks whether OP behaves as a simple affine iv of LOOP in STMT and returns its base and step in IV if possible. If ALLOW_NONCONSTANT_STEP is true, we want step to be invariant in LOOP. Otherwise we require it to be an integer constant. IV->no_overflow is set to true if we are sure the iv cannot overflow (e.g. because it is computed in signed arithmetics). */ bool simple_iv (struct loop *loop, tree stmt, tree op, affine_iv *iv, bool allow_nonconstant_step) { basic_block bb = bb_for_stmt (stmt); tree type, ev; bool folded_casts; iv->base = NULL_TREE; iv->step = NULL_TREE; iv->no_overflow = false; type = TREE_TYPE (op); if (TREE_CODE (type) != INTEGER_TYPE && TREE_CODE (type) != POINTER_TYPE) return false; ev = analyze_scalar_evolution_in_loop (loop, bb->loop_father, op, &folded_casts); if (chrec_contains_undetermined (ev)) return false; if (tree_does_not_contain_chrecs (ev) && !chrec_contains_symbols_defined_in_loop (ev, loop->num)) { iv->base = ev; iv->no_overflow = true; return true; } if (TREE_CODE (ev) != POLYNOMIAL_CHREC || CHREC_VARIABLE (ev) != (unsigned) loop->num) return false; iv->step = CHREC_RIGHT (ev); if (allow_nonconstant_step) { if (tree_contains_chrecs (iv->step, NULL) || chrec_contains_symbols_defined_in_loop (iv->step, loop->num)) return false; } else if (TREE_CODE (iv->step) != INTEGER_CST) return false; iv->base = CHREC_LEFT (ev); if (tree_contains_chrecs (iv->base, NULL) || chrec_contains_symbols_defined_in_loop (iv->base, loop->num)) return false; iv->no_overflow = !folded_casts && TYPE_OVERFLOW_UNDEFINED (type); return true; } /* Runs the analysis of scalar evolutions. */ void scev_analysis (void) { VEC(tree,heap) *exit_conditions; exit_conditions = VEC_alloc (tree, heap, 37); select_loops_exit_conditions (current_loops, &exit_conditions); if (dump_file && (dump_flags & TDF_STATS)) analyze_scalar_evolution_for_all_loop_phi_nodes (&exit_conditions); number_of_iterations_for_all_loops (&exit_conditions); VEC_free (tree, heap, exit_conditions); } /* Finalize the scalar evolution analysis. */ void scev_finalize (void) { htab_delete (scalar_evolution_info); BITMAP_FREE (already_instantiated); } /* Returns true if EXPR looks expensive. */ static bool expression_expensive_p (tree expr) { return force_expr_to_var_cost (expr) >= target_spill_cost; } /* Replace ssa names for that scev can prove they are constant by the appropriate constants. Also perform final value replacement in loops, in case the replacement expressions are cheap. We only consider SSA names defined by phi nodes; rest is left to the ordinary constant propagation pass. */ unsigned int scev_const_prop (void) { basic_block bb; tree name, phi, next_phi, type, ev; struct loop *loop, *ex_loop; bitmap ssa_names_to_remove = NULL; unsigned i; if (!current_loops) return 0; FOR_EACH_BB (bb) { loop = bb->loop_father; for (phi = phi_nodes (bb); phi; phi = PHI_CHAIN (phi)) { name = PHI_RESULT (phi); if (!is_gimple_reg (name)) continue; type = TREE_TYPE (name); if (!POINTER_TYPE_P (type) && !INTEGRAL_TYPE_P (type)) continue; ev = resolve_mixers (loop, analyze_scalar_evolution (loop, name)); if (!is_gimple_min_invariant (ev) || !may_propagate_copy (name, ev)) continue; /* Replace the uses of the name. */ if (name != ev) replace_uses_by (name, ev); if (!ssa_names_to_remove) ssa_names_to_remove = BITMAP_ALLOC (NULL); bitmap_set_bit (ssa_names_to_remove, SSA_NAME_VERSION (name)); } } /* Remove the ssa names that were replaced by constants. We do not remove them directly in the previous cycle, since this invalidates scev cache. */ if (ssa_names_to_remove) { bitmap_iterator bi; unsigned i; EXECUTE_IF_SET_IN_BITMAP (ssa_names_to_remove, 0, i, bi) { name = ssa_name (i); phi = SSA_NAME_DEF_STMT (name); gcc_assert (TREE_CODE (phi) == PHI_NODE); remove_phi_node (phi, NULL); } BITMAP_FREE (ssa_names_to_remove); scev_reset (); } /* Now the regular final value replacement. */ for (i = current_loops->num - 1; i > 0; i--) { edge exit; tree def, rslt, ass, niter; block_stmt_iterator bsi; loop = current_loops->parray[i]; if (!loop) continue; /* If we do not know exact number of iterations of the loop, we cannot replace the final value. */ exit = loop->single_exit; if (!exit) continue; niter = number_of_iterations_in_loop (loop); if (niter == chrec_dont_know /* If computing the number of iterations is expensive, it may be better not to introduce computations involving it. */ || expression_expensive_p (niter)) continue; /* Ensure that it is possible to insert new statements somewhere. */ if (!single_pred_p (exit->dest)) split_loop_exit_edge (exit); tree_block_label (exit->dest); bsi = bsi_after_labels (exit->dest); ex_loop = superloop_at_depth (loop, exit->dest->loop_father->depth + 1); for (phi = phi_nodes (exit->dest); phi; phi = next_phi) { next_phi = PHI_CHAIN (phi); rslt = PHI_RESULT (phi); def = PHI_ARG_DEF_FROM_EDGE (phi, exit); if (!is_gimple_reg (def)) continue; if (!POINTER_TYPE_P (TREE_TYPE (def)) && !INTEGRAL_TYPE_P (TREE_TYPE (def))) continue; def = analyze_scalar_evolution_in_loop (ex_loop, loop, def, NULL); def = compute_overall_effect_of_inner_loop (ex_loop, def); if (!tree_does_not_contain_chrecs (def) || chrec_contains_symbols_defined_in_loop (def, ex_loop->num) /* Moving the computation from the loop may prolong life range of some ssa names, which may cause problems if they appear on abnormal edges. */ || contains_abnormal_ssa_name_p (def)) continue; /* Eliminate the phi node and replace it by a computation outside the loop. */ def = unshare_expr (def); SET_PHI_RESULT (phi, NULL_TREE); remove_phi_node (phi, NULL_TREE); ass = build2 (MODIFY_EXPR, void_type_node, rslt, NULL_TREE); SSA_NAME_DEF_STMT (rslt) = ass; { block_stmt_iterator dest = bsi; bsi_insert_before (&dest, ass, BSI_NEW_STMT); def = force_gimple_operand_bsi (&dest, def, false, NULL_TREE); } TREE_OPERAND (ass, 1) = def; update_stmt (ass); } } return 0; }
Go to most recent revision | Compare with Previous | Blame | View Log