URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [INSTALL/] [specific.html] - Rev 270
Go to most recent revision | Compare with Previous | Blame | View Log
<html lang="en">
<head>
<title>Host/Target specific installation notes for GCC</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="Host/Target specific installation notes for GCC">
<meta name="generator" content="makeinfo 4.12">
<link title="Top" rel="top" href="#Top">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<!--
Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997,
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
2008 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2 or
any later version published by the Free Software Foundation; with no
Invariant Sections, the Front-Cover texts being (a) (see below), and
with the Back-Cover Texts being (b) (see below). A copy of the
license is included in the section entitled "GNU Free Documentation License".
(a) The FSF's Front-Cover Text is:
A GNU Manual
(b) The FSF's Back-Cover Text is:
You have freedom to copy and modify this GNU Manual, like GNU
software. Copies published by the Free Software Foundation raise
funds for GNU development.-->
<meta http-equiv="Content-Style-Type" content="text/css">
<style type="text/css"><!--
pre.display { font-family:inherit }
pre.format { font-family:inherit }
pre.smalldisplay { font-family:inherit; font-size:smaller }
pre.smallformat { font-family:inherit; font-size:smaller }
pre.smallexample { font-size:smaller }
pre.smalllisp { font-size:smaller }
span.sc { font-variant:small-caps }
span.roman { font-family:serif; font-weight:normal; }
span.sansserif { font-family:sans-serif; font-weight:normal; }
--></style>
</head>
<body>
<h1 class="settitle">Host/Target specific installation notes for GCC</h1>
<a name="index-Specific-1"></a><a name="index-Specific-installation-notes-2"></a><a name="index-Target-specific-installation-3"></a><a name="index-Host-specific-installation-4"></a><a name="index-Target-specific-installation-notes-5"></a>
Please read this document carefully <em>before</em> installing the
GNU Compiler Collection on your machine.
<p>Note that this list of install notes is <em>not</em> a list of supported
hosts or targets. Not all supported hosts and targets are listed
here, only the ones that require host-specific or target-specific
information are.
<ul>
<li><a href="#alpha-x-x">alpha*-*-*</a>
<li><a href="#alpha-dec-osf">alpha*-dec-osf*</a>
<li><a href="#arc-x-elf">arc-*-elf</a>
<li><a href="#arm-x-elf">arm-*-elf</a>
<li><a href="#avr">avr</a>
<li><a href="#bfin">Blackfin</a>
<li><a href="#dos">DOS</a>
<li><a href="#x-x-freebsd">*-*-freebsd*</a>
<li><a href="#h8300-hms">h8300-hms</a>
<li><a href="#hppa-hp-hpux">hppa*-hp-hpux*</a>
<li><a href="#hppa-hp-hpux10">hppa*-hp-hpux10</a>
<li><a href="#hppa-hp-hpux11">hppa*-hp-hpux11</a>
<li><a href="#x-x-linux-gnu">*-*-linux-gnu</a>
<li><a href="#ix86-x-linux">i?86-*-linux*</a>
<li><a href="#ix86-x-solaris289">i?86-*-solaris2.[89]</a>
<li><a href="#ix86-x-solaris210">i?86-*-solaris2.10</a>
<li><a href="#ia64-x-linux">ia64-*-linux</a>
<li><a href="#ia64-x-hpux">ia64-*-hpux*</a>
<li><a href="#x-ibm-aix">*-ibm-aix*</a>
<li><a href="#iq2000-x-elf">iq2000-*-elf</a>
<li><a href="#lm32-x-elf">lm32-*-elf</a>
<li><a href="#lm32-x-uclinux">lm32-*-uclinux</a>
<li><a href="#m32c-x-elf">m32c-*-elf</a>
<li><a href="#m32r-x-elf">m32r-*-elf</a>
<li><a href="#m6811-elf">m6811-elf</a>
<li><a href="#m6812-elf">m6812-elf</a>
<li><a href="#m68k-x-x">m68k-*-*</a>
<li><a href="#m68k-uclinux">m68k-uclinux</a>
<li><a href="#mep-x-elf">mep-*-elf</a>
<li><a href="#mips-x-x">mips-*-*</a>
<li><a href="#mips-sgi-irix5">mips-sgi-irix5</a>
<li><a href="#mips-sgi-irix6">mips-sgi-irix6</a>
<li><a href="#powerpc-x-x">powerpc*-*-*</a>
<li><a href="#powerpc-x-darwin">powerpc-*-darwin*</a>
<li><a href="#powerpc-x-elf">powerpc-*-elf</a>
<li><a href="#powerpc-x-linux-gnu">powerpc*-*-linux-gnu*</a>
<li><a href="#powerpc-x-netbsd">powerpc-*-netbsd*</a>
<li><a href="#powerpc-x-eabisim">powerpc-*-eabisim</a>
<li><a href="#powerpc-x-eabi">powerpc-*-eabi</a>
<li><a href="#powerpcle-x-elf">powerpcle-*-elf</a>
<li><a href="#powerpcle-x-eabisim">powerpcle-*-eabisim</a>
<li><a href="#powerpcle-x-eabi">powerpcle-*-eabi</a>
<li><a href="#s390-x-linux">s390-*-linux*</a>
<li><a href="#s390x-x-linux">s390x-*-linux*</a>
<li><a href="#s390x-ibm-tpf">s390x-ibm-tpf*</a>
<li><a href="#x-x-solaris2">*-*-solaris2*</a>
<li><a href="#sparc-sun-solaris2">sparc-sun-solaris2*</a>
<li><a href="#sparc-sun-solaris27">sparc-sun-solaris2.7</a>
<li><a href="#sparc-sun-solaris210">sparc-sun-solaris2.10</a>
<li><a href="#sparc-x-linux">sparc-*-linux*</a>
<li><a href="#sparc64-x-solaris2">sparc64-*-solaris2*</a>
<li><a href="#sparcv9-x-solaris2">sparcv9-*-solaris2*</a>
<li><a href="#x-x-vxworks">*-*-vxworks*</a>
<li><a href="#x86-64-x-x">x86_64-*-*</a> amd64-*-*
<li><a href="#xtensa-x-elf">xtensa*-*-elf</a>
<li><a href="#xtensa-x-linux">xtensa*-*-linux*</a>
<li><a href="#windows">Microsoft Windows</a>
<li><a href="#x-x-cygwin">*-*-cygwin</a>
<li><a href="#x-x-interix">*-*-interix</a>
<li><a href="#x-x-mingw32">*-*-mingw32</a>
<li><a href="#os2">OS/2</a>
<li><a href="#older">Older systems</a>
</ul>
<ul>
<li><a href="#elf">all ELF targets</a> (SVR4, Solaris 2, etc.)
</ul>
<p><!-- -------- host/target specific issues start here ---------------- -->
<hr />
<h3 class="heading"><a name="TOC0"></a><a name="alpha_002dx_002dx"></a>alpha*-*-*</h3>
<p>This section contains general configuration information for all
alpha-based platforms using ELF (in particular, ignore this section for
DEC OSF/1, Digital UNIX and Tru64 UNIX). In addition to reading this
section, please read all other sections that match your target.
<p>We require binutils 2.11.2 or newer.
Previous binutils releases had a number of problems with DWARF 2
debugging information, not the least of which is incorrect linking of
shared libraries.
<p><hr />
<h3 class="heading"><a name="TOC1"></a><a name="alpha_002ddec_002dosf"></a>alpha*-dec-osf*</h3>
<p>Systems using processors that implement the DEC Alpha architecture and
are running the DEC/Compaq/HP Unix (DEC OSF/1, Digital UNIX, or Compaq/HP
Tru64 UNIX) operating system, for example the DEC Alpha AXP systems.
<p>As of GCC 3.2, versions before <code>alpha*-dec-osf4</code> are no longer
supported. (These are the versions which identify themselves as DEC
OSF/1.) As of GCC 4.5, support for Tru64 UNIX V4.0 and V5.0 has been
obsoleted, but can still be enabled by configuring with
<samp><span class="option">--enable-obsolete</span></samp>. Support will be removed in GCC 4.6.
<p>On Tru64 UNIX, virtual memory exhausted bootstrap failures
may be fixed by reconfiguring Kernel Virtual Memory and Swap parameters
per the <samp><span class="command">/usr/sbin/sys_check</span></samp> Tuning Suggestions,
or applying the patch in
<a href="http://gcc.gnu.org/ml/gcc/2002-08/msg00822.html">http://gcc.gnu.org/ml/gcc/2002-08/msg00822.html</a>. Depending on
the OS version used, you need a data segment size between 512 MB and
1 GB, so simply use <samp><span class="command">ulimit -Sd unlimited</span></samp>.
<p>As of GNU binutils 2.20.1, neither GNU <samp><span class="command">as</span></samp> nor GNU <samp><span class="command">ld</span></samp>
are supported on Tru64 UNIX, so you must not configure GCC with
<samp><span class="option">--with-gnu-as</span></samp> or <samp><span class="option">--with-gnu-ld</span></samp>.
<p>GCC writes a ‘<samp><span class="samp">.verstamp</span></samp>’ directive to the assembler output file
unless it is built as a cross-compiler. It gets the version to use from
the system header file <samp><span class="file">/usr/include/stamp.h</span></samp>. If you install a
new version of Tru64 UNIX, you should rebuild GCC to pick up the new version
stamp.
<p>GCC now supports both the native (ECOFF) debugging format used by DBX
and GDB and an encapsulated STABS format for use only with GDB. See the
discussion of the <samp><span class="option">--with-stabs</span></samp> option of <samp><span class="file">configure</span></samp> above
for more information on these formats and how to select them.
<!-- FIXME: does this work at all? If so, perhaps make default. -->
<p>There is a bug in DEC's assembler that produces incorrect line numbers
for ECOFF format when the ‘<samp><span class="samp">.align</span></samp>’ directive is used. To work
around this problem, GCC will not emit such alignment directives
while writing ECOFF format debugging information even if optimization is
being performed. Unfortunately, this has the very undesirable
side-effect that code addresses when <samp><span class="option">-O</span></samp> is specified are
different depending on whether or not <samp><span class="option">-g</span></samp> is also specified.
<p>To avoid this behavior, specify <samp><span class="option">-gstabs+</span></samp> and use GDB instead of
DBX. DEC is now aware of this problem with the assembler and hopes to
provide a fix shortly.
<!-- FIXME: still applicable? -->
<p><hr />
<h3 class="heading"><a name="TOC2"></a><a name="arc_002dx_002delf"></a>arc-*-elf</h3>
<p>Argonaut ARC processor.
This configuration is intended for embedded systems.
<p><hr />
<h3 class="heading"><a name="TOC3"></a><a name="arm_002dx_002delf"></a>arm-*-elf</h3>
<p>ARM-family processors. Subtargets that use the ELF object format
require GNU binutils 2.13 or newer. Such subtargets include:
<code>arm-*-freebsd</code>, <code>arm-*-netbsdelf</code>, <code>arm-*-*linux</code>
and <code>arm-*-rtems</code>.
<p><hr />
<h3 class="heading"><a name="TOC4"></a><a name="avr"></a>avr</h3>
<p>ATMEL AVR-family micro controllers. These are used in embedded
applications. There are no standard Unix configurations.
See “AVR Options” in the main manual
for the list of supported MCU types.
<p>Use ‘<samp><span class="samp">configure --target=avr --enable-languages="c"</span></samp>’ to configure GCC.
<p>Further installation notes and other useful information about AVR tools
can also be obtained from:
<ul>
<li><a href="http://www.nongnu.org/avr/">http://www.nongnu.org/avr/</a>
<li><a href="http://www.amelek.gda.pl/avr/">http://www.amelek.gda.pl/avr/</a>
</ul>
<p>We <em>strongly</em> recommend using binutils 2.13 or newer.
<p>The following error:
<pre class="smallexample"> Error: register required
</pre>
<p>indicates that you should upgrade to a newer version of the binutils.
<p><hr />
<h3 class="heading"><a name="TOC5"></a><a name="bfin"></a>Blackfin</h3>
<p>The Blackfin processor, an Analog Devices DSP.
See “Blackfin Options” in the main manual
<p>More information, and a version of binutils with support for this processor,
is available at <a href="http://blackfin.uclinux.org">http://blackfin.uclinux.org</a>
<p><hr />
<h3 class="heading"><a name="TOC6"></a><a name="cris"></a>CRIS</h3>
<p>CRIS is the CPU architecture in Axis Communications ETRAX system-on-a-chip
series. These are used in embedded applications.
<p>See “CRIS Options” in the main manual
for a list of CRIS-specific options.
<p>There are a few different CRIS targets:
<dl>
<dt><code>cris-axis-elf</code><dd>Mainly for monolithic embedded systems. Includes a multilib for the
‘<samp><span class="samp">v10</span></samp>’ core used in ‘<samp><span class="samp">ETRAX 100 LX</span></samp>’.
<br><dt><code>cris-axis-linux-gnu</code><dd>A GNU/Linux port for the CRIS architecture, currently targeting
‘<samp><span class="samp">ETRAX 100 LX</span></samp>’ by default.
</dl>
<p>For <code>cris-axis-elf</code> you need binutils 2.11
or newer. For <code>cris-axis-linux-gnu</code> you need binutils 2.12 or newer.
<p>Pre-packaged tools can be obtained from
<a href="ftp://ftp.axis.com/pub/axis/tools/cris/compiler-kit/">ftp://ftp.axis.com/pub/axis/tools/cris/compiler-kit/</a>. More
information about this platform is available at
<a href="http://developer.axis.com/">http://developer.axis.com/</a>.
<p><hr />
<h3 class="heading"><a name="TOC7"></a><a name="crx"></a>CRX</h3>
<p>The CRX CompactRISC architecture is a low-power 32-bit architecture with
fast context switching and architectural extensibility features.
<p>See “CRX Options” in the main manual for a list of CRX-specific options.
<p>Use ‘<samp><span class="samp">configure --target=crx-elf --enable-languages=c,c++</span></samp>’ to configure
GCC for building a CRX cross-compiler. The option ‘<samp><span class="samp">--target=crx-elf</span></samp>’
is also used to build the ‘<samp><span class="samp">newlib</span></samp>’ C library for CRX.
<p>It is also possible to build libstdc++-v3 for the CRX architecture. This
needs to be done in a separate step with the following configure settings:
‘<samp><span class="samp">gcc/libstdc++-v3/configure --host=crx-elf --with-newlib
--enable-sjlj-exceptions --enable-cxx-flags='-fexceptions -frtti'</span></samp>’
<p><hr />
<h3 class="heading"><a name="TOC8"></a><a name="dos"></a>DOS</h3>
<p>Please have a look at the <a href="binaries.html">binaries page</a>.
<p>You cannot install GCC by itself on MSDOS; it will not compile under
any MSDOS compiler except itself. You need to get the complete
compilation package DJGPP, which includes binaries as well as sources,
and includes all the necessary compilation tools and libraries.
<p><hr />
<h3 class="heading"><a name="TOC9"></a><a name="x_002dx_002dfreebsd"></a>*-*-freebsd*</h3>
<p>Support for FreeBSD 1 was discontinued in GCC 3.2. Support for
FreeBSD 2 (and any mutant a.out variants of FreeBSD 3) was
discontinued in GCC 4.0.
<p>In GCC 4.5, we enabled the use of <code>dl_iterate_phdr</code> inside boehm-gc on
FreeBSD 7 or later. In order to better match the configuration of the
FreeBSD system compiler: We also enabled the check to see if libc
provides SSP support (which it does on FreeBSD 7), the use of
<code>dl_iterate_phdr</code> inside <samp><span class="file">libgcc_s.so.1</span></samp> (on FreeBSD 7 or later)
and the use of <code>__cxa_atexit</code> by default (on FreeBSD 6 or later).
<p>We support FreeBSD using the ELF file format with DWARF 2 debugging
for all CPU architectures. You may use <samp><span class="option">-gstabs</span></samp> instead of
<samp><span class="option">-g</span></samp>, if you really want the old debugging format. There are
no known issues with mixing object files and libraries with different
debugging formats. Otherwise, this release of GCC should now match
more of the configuration used in the stock FreeBSD configuration of
GCC. In particular, <samp><span class="option">--enable-threads</span></samp> is now configured by
default. However, as a general user, do not attempt to replace the
system compiler with this release. Known to bootstrap and check with
good results on FreeBSD 7.2-STABLE. In the past, known to bootstrap
and check with good results on FreeBSD 3.0, 3.4, 4.0, 4.2, 4.3, 4.4,
4.5, 4.8, 4.9 and 5-CURRENT.
<p>The version of binutils installed in <samp><span class="file">/usr/bin</span></samp> probably works
with this release of GCC. Bootstrapping against the latest GNU
binutils and/or the version found in <samp><span class="file">/usr/ports/devel/binutils</span></samp> has
been known to enable additional features and improve overall testsuite
results. However, it is currently known that boehm-gc (which itself
is required for java) may not configure properly on FreeBSD prior to
the FreeBSD 7.0 release with GNU binutils after 2.16.1.
<p><hr />
<h3 class="heading"><a name="TOC10"></a><a name="h8300_002dhms"></a>h8300-hms</h3>
<p>Renesas H8/300 series of processors.
<p>Please have a look at the <a href="binaries.html">binaries page</a>.
<p>The calling convention and structure layout has changed in release 2.6.
All code must be recompiled. The calling convention now passes the
first three arguments in function calls in registers. Structures are no
longer a multiple of 2 bytes.
<p><hr />
<h3 class="heading"><a name="TOC11"></a><a name="hppa_002dhp_002dhpux"></a>hppa*-hp-hpux*</h3>
<p>Support for HP-UX version 9 and older was discontinued in GCC 3.4.
<p>We require using gas/binutils on all hppa platforms. Version 2.19 or
later is recommended.
<p>It may be helpful to configure GCC with the
<a href="./configure.html#with-gnu-as"><samp><span class="option">--with-gnu-as</span></samp></a> and
<samp><span class="option">--with-as=...</span></samp> options to ensure that GCC can find GAS.
<p>The HP assembler should not be used with GCC. It is rarely tested and may
not work. It shouldn't be used with any languages other than C due to its
many limitations.
<p>Specifically, <samp><span class="option">-g</span></samp> does not work (HP-UX uses a peculiar debugging
format which GCC does not know about). It also inserts timestamps
into each object file it creates, causing the 3-stage comparison test to
fail during a bootstrap. You should be able to continue by saying
‘<samp><span class="samp">make all-host all-target</span></samp>’ after getting the failure from ‘<samp><span class="samp">make</span></samp>’.
<p>Various GCC features are not supported. For example, it does not support weak
symbols or alias definitions. As a result, explicit template instantiations
are required when using C++. This makes it difficult if not impossible to
build many C++ applications.
<p>There are two default scheduling models for instructions. These are
PROCESSOR_7100LC and PROCESSOR_8000. They are selected from the pa-risc
architecture specified for the target machine when configuring.
PROCESSOR_8000 is the default. PROCESSOR_7100LC is selected when
the target is a ‘<samp><span class="samp">hppa1*</span></samp>’ machine.
<p>The PROCESSOR_8000 model is not well suited to older processors. Thus,
it is important to completely specify the machine architecture when
configuring if you want a model other than PROCESSOR_8000. The macro
TARGET_SCHED_DEFAULT can be defined in BOOT_CFLAGS if a different
default scheduling model is desired.
<p>As of GCC 4.0, GCC uses the UNIX 95 namespace for HP-UX 10.10
through 11.00, and the UNIX 98 namespace for HP-UX 11.11 and later.
This namespace change might cause problems when bootstrapping with
an earlier version of GCC or the HP compiler as essentially the same
namespace is required for an entire build. This problem can be avoided
in a number of ways. With HP cc, <samp><span class="env">UNIX_STD</span></samp> can be set to ‘<samp><span class="samp">95</span></samp>’
or ‘<samp><span class="samp">98</span></samp>’. Another way is to add an appropriate set of predefines
to <samp><span class="env">CC</span></samp>. The description for the <samp><span class="option">munix=</span></samp> option contains
a list of the predefines used with each standard.
<p>More specific information to ‘<samp><span class="samp">hppa*-hp-hpux*</span></samp>’ targets follows.
<p><hr />
<h3 class="heading"><a name="TOC12"></a><a name="hppa_002dhp_002dhpux10"></a>hppa*-hp-hpux10</h3>
<p>For hpux10.20, we <em>highly</em> recommend you pick up the latest sed patch
<code>PHCO_19798</code> from HP. HP has two sites which provide patches free of
charge:
<ul>
<li><a href="http://us.itrc.hp.com/service/home/home.do">US, Canada, Asia-Pacific, and
Latin-America</a><li><a href="http://europe.itrc.hp.com/service/home/home.do">http://europe.itrc.hp.com/service/home/home.do</a> Europe.
</ul>
<p>The C++ ABI has changed incompatibly in GCC 4.0. COMDAT subspaces are
used for one-only code and data. This resolves many of the previous
problems in using C++ on this target. However, the ABI is not compatible
with the one implemented under HP-UX 11 using secondary definitions.
<p><hr />
<h3 class="heading"><a name="TOC13"></a><a name="hppa_002dhp_002dhpux11"></a>hppa*-hp-hpux11</h3>
<p>GCC 3.0 and up support HP-UX 11. GCC 2.95.x is not supported and cannot
be used to compile GCC 3.0 and up.
<p>The libffi and libjava libraries haven't been ported to 64-bit HP-UX and don't build.
<p>Refer to <a href="binaries.html">binaries</a> for information about obtaining
precompiled GCC binaries for HP-UX. Precompiled binaries must be obtained
to build the Ada language as it can't be bootstrapped using C. Ada is
only available for the 32-bit PA-RISC runtime.
<p>Starting with GCC 3.4 an ISO C compiler is required to bootstrap. The
bundled compiler supports only traditional C; you will need either HP's
unbundled compiler, or a binary distribution of GCC.
<p>It is possible to build GCC 3.3 starting with the bundled HP compiler,
but the process requires several steps. GCC 3.3 can then be used to
build later versions. The fastjar program contains ISO C code and
can't be built with the HP bundled compiler. This problem can be
avoided by not building the Java language. For example, use the
<samp><span class="option">--enable-languages="c,c++,f77,objc"</span></samp> option in your configure
command.
<p>There are several possible approaches to building the distribution.
Binutils can be built first using the HP tools. Then, the GCC
distribution can be built. The second approach is to build GCC
first using the HP tools, then build binutils, then rebuild GCC.
There have been problems with various binary distributions, so it
is best not to start from a binary distribution.
<p>On 64-bit capable systems, there are two distinct targets. Different
installation prefixes must be used if both are to be installed on
the same system. The ‘<samp><span class="samp">hppa[1-2]*-hp-hpux11*</span></samp>’ target generates code
for the 32-bit PA-RISC runtime architecture and uses the HP linker.
The ‘<samp><span class="samp">hppa64-hp-hpux11*</span></samp>’ target generates 64-bit code for the
PA-RISC 2.0 architecture.
<p>The script config.guess now selects the target type based on the compiler
detected during configuration. You must define <samp><span class="env">PATH</span></samp> or <samp><span class="env">CC</span></samp> so
that configure finds an appropriate compiler for the initial bootstrap.
When <samp><span class="env">CC</span></samp> is used, the definition should contain the options that are
needed whenever <samp><span class="env">CC</span></samp> is used.
<p>Specifically, options that determine the runtime architecture must be
in <samp><span class="env">CC</span></samp> to correctly select the target for the build. It is also
convenient to place many other compiler options in <samp><span class="env">CC</span></samp>. For example,
<samp><span class="env">CC="cc -Ac +DA2.0W -Wp,-H16376 -D_CLASSIC_TYPES -D_HPUX_SOURCE"</span></samp>
can be used to bootstrap the GCC 3.3 branch with the HP compiler in
64-bit K&R/bundled mode. The <samp><span class="option">+DA2.0W</span></samp> option will result in
the automatic selection of the ‘<samp><span class="samp">hppa64-hp-hpux11*</span></samp>’ target. The
macro definition table of cpp needs to be increased for a successful
build with the HP compiler. _CLASSIC_TYPES and _HPUX_SOURCE need to
be defined when building with the bundled compiler, or when using the
<samp><span class="option">-Ac</span></samp> option. These defines aren't necessary with <samp><span class="option">-Ae</span></samp>.
<p>It is best to explicitly configure the ‘<samp><span class="samp">hppa64-hp-hpux11*</span></samp>’ target
with the <samp><span class="option">--with-ld=...</span></samp> option. This overrides the standard
search for ld. The two linkers supported on this target require different
commands. The default linker is determined during configuration. As a
result, it's not possible to switch linkers in the middle of a GCC build.
This has been reported to sometimes occur in unified builds of binutils
and GCC.
<p>A recent linker patch must be installed for the correct operation of
GCC 3.3 and later. <code>PHSS_26559</code> and <code>PHSS_24304</code> are the
oldest linker patches that are known to work. They are for HP-UX
11.00 and 11.11, respectively. <code>PHSS_24303</code>, the companion to
<code>PHSS_24304</code>, might be usable but it hasn't been tested. These
patches have been superseded. Consult the HP patch database to obtain
the currently recommended linker patch for your system.
<p>The patches are necessary for the support of weak symbols on the
32-bit port, and for the running of initializers and finalizers. Weak
symbols are implemented using SOM secondary definition symbols. Prior
to HP-UX 11, there are bugs in the linker support for secondary symbols.
The patches correct a problem of linker core dumps creating shared
libraries containing secondary symbols, as well as various other
linking issues involving secondary symbols.
<p>GCC 3.3 uses the ELF DT_INIT_ARRAY and DT_FINI_ARRAY capabilities to
run initializers and finalizers on the 64-bit port. The 32-bit port
uses the linker <samp><span class="option">+init</span></samp> and <samp><span class="option">+fini</span></samp> options for the same
purpose. The patches correct various problems with the +init/+fini
options, including program core dumps. Binutils 2.14 corrects a
problem on the 64-bit port resulting from HP's non-standard use of
the .init and .fini sections for array initializers and finalizers.
<p>Although the HP and GNU linkers are both supported for the
‘<samp><span class="samp">hppa64-hp-hpux11*</span></samp>’ target, it is strongly recommended that the
HP linker be used for link editing on this target.
<p>At this time, the GNU linker does not support the creation of long
branch stubs. As a result, it can't successfully link binaries
containing branch offsets larger than 8 megabytes. In addition,
there are problems linking shared libraries, linking executables
with <samp><span class="option">-static</span></samp>, and with dwarf2 unwind and exception support.
It also doesn't provide stubs for internal calls to global functions
in shared libraries, so these calls can't be overloaded.
<p>The HP dynamic loader does not support GNU symbol versioning, so symbol
versioning is not supported. It may be necessary to disable symbol
versioning with <samp><span class="option">--disable-symvers</span></samp> when using GNU ld.
<p>POSIX threads are the default. The optional DCE thread library is not
supported, so <samp><span class="option">--enable-threads=dce</span></samp> does not work.
<p><hr />
<h3 class="heading"><a name="TOC14"></a><a name="x_002dx_002dlinux_002dgnu"></a>*-*-linux-gnu</h3>
<p>Versions of libstdc++-v3 starting with 3.2.1 require bug fixes present
in glibc 2.2.5 and later. More information is available in the
libstdc++-v3 documentation.
<p><hr />
<h3 class="heading"><a name="TOC15"></a><a name="ix86_002dx_002dlinux"></a>i?86-*-linux*</h3>
<p>As of GCC 3.3, binutils 2.13.1 or later is required for this platform.
See <a href="http://gcc.gnu.org/PR10877">bug 10877</a> for more information.
<p>If you receive Signal 11 errors when building on GNU/Linux, then it is
possible you have a hardware problem. Further information on this can be
found on <a href="http://www.bitwizard.nl/sig11/">www.bitwizard.nl</a>.
<p><hr />
<h3 class="heading"><a name="TOC16"></a><a name="ix86_002dx_002dsolaris289"></a>i?86-*-solaris2.[89]</h3>
<p>The Sun assembler in Solaris 8 and 9 has several bugs and limitations.
While GCC works around them, several features are missing, so it is
<!-- FIXME: which ones? -->
recommended to use the GNU assembler instead. There is no bundled
version, but the current version, from GNU binutils 2.20.1, is known to
work.
<p>Solaris~2/x86 doesn't support the execution of SSE/SSE2 instructions
before Solaris~9 4/04, even if the CPU supports them. Programs will
receive <code>SIGILL</code> if they try. The fix is available both in
Solaris~9 Update~6 and kernel patch 112234-12 or newer. There is no
corresponding patch for Solaris 8. To avoid this problem,
<samp><span class="option">-march</span></samp> defaults to ‘<samp><span class="samp">pentiumpro</span></samp>’ on Solaris 8 and 9. If
you have the patch installed, you can configure GCC with an appropriate
<samp><span class="option">--with-arch</span></samp> option, but need GNU <samp><span class="command">as</span></samp> for SSE2 support.
<p><hr />
<h3 class="heading"><a name="TOC17"></a><a name="ix86_002dx_002dsolaris210"></a>i?86-*-solaris2.10</h3>
<p>Use this for Solaris 10 or later on x86 and x86-64 systems. This
configuration is supported by GCC 4.0 and later versions only. Unlike
‘<samp><span class="samp">sparcv9-sun-solaris2*</span></samp>’, there is no corresponding 64-bit
configuration like ‘<samp><span class="samp">amd64-*-solaris2*</span></samp>’ or ‘<samp><span class="samp">x86_64-*-solaris2*</span></samp>’.
<!-- FIXME: will there ever be? -->
<p>It is recommended that you configure GCC to use the GNU assembler, in
<samp><span class="file">/usr/sfw/bin/gas</span></samp>. The versions included in Solaris 10, from GNU
binutils 2.15, and Solaris 11, from GNU binutils 2.19, work fine,
although the current version, from GNU binutils
2.20.1, is known to work, too. Recent versions of the Sun assembler in
<samp><span class="file">/usr/ccs/bin/as</span></samp> work almost as well, though.
<!-- FIXME: as patch requirements? -->
<p>For linking, the Sun linker, is preferred. If you want to use the GNU
linker instead, which is available in <samp><span class="file">/usr/sfw/bin/gld</span></samp>, note that
due to a packaging bug the version in Solaris 10, from GNU binutils
2.15, cannot be used, while the version in Solaris 11, from GNU binutils
2.19, works, as does the latest version, from GNU binutils 2.20.1.
<p>To use GNU <samp><span class="command">as</span></samp>, configure with the options
<samp><span class="option">--with-gnu-as --with-as=/usr/sfw/bin/gas</span></samp>. It may be necessary
to configure with <samp><span class="option">--without-gnu-ld --with-ld=/usr/ccs/bin/ld</span></samp> to
guarantee use of Sun <samp><span class="command">ld</span></samp>.
<!-- FIXME: why -without-gnu-ld -with-ld? -->
<p><hr />
<h3 class="heading"><a name="TOC18"></a><a name="ia64_002dx_002dlinux"></a>ia64-*-linux</h3>
<p>IA-64 processor (also known as IPF, or Itanium Processor Family)
running GNU/Linux.
<p>If you are using the installed system libunwind library with
<samp><span class="option">--with-system-libunwind</span></samp>, then you must use libunwind 0.98 or
later.
<p>None of the following versions of GCC has an ABI that is compatible
with any of the other versions in this list, with the exception that
Red Hat 2.96 and Trillian 000171 are compatible with each other:
3.1, 3.0.2, 3.0.1, 3.0, Red Hat 2.96, and Trillian 000717.
This primarily affects C++ programs and programs that create shared libraries.
GCC 3.1 or later is recommended for compiling linux, the kernel.
As of version 3.1 GCC is believed to be fully ABI compliant, and hence no
more major ABI changes are expected.
<p><hr />
<h3 class="heading"><a name="TOC19"></a><a name="ia64_002dx_002dhpux"></a>ia64-*-hpux*</h3>
<p>Building GCC on this target requires the GNU Assembler. The bundled HP
assembler will not work. To prevent GCC from using the wrong assembler,
the option <samp><span class="option">--with-gnu-as</span></samp> may be necessary.
<p>The GCC libunwind library has not been ported to HPUX. This means that for
GCC versions 3.2.3 and earlier, <samp><span class="option">--enable-libunwind-exceptions</span></samp>
is required to build GCC. For GCC 3.3 and later, this is the default.
For gcc 3.4.3 and later, <samp><span class="option">--enable-libunwind-exceptions</span></samp> is
removed and the system libunwind library will always be used.
<p><hr />
<!-- rs6000-ibm-aix*, powerpc-ibm-aix* -->
<h3 class="heading"><a name="TOC20"></a><a name="x_002dibm_002daix"></a>*-ibm-aix*</h3>
<p>Support for AIX version 3 and older was discontinued in GCC 3.4.
Support for AIX version 4.2 and older was discontinued in GCC 4.5.
<p>“out of memory” bootstrap failures may indicate a problem with
process resource limits (ulimit). Hard limits are configured in the
<samp><span class="file">/etc/security/limits</span></samp> system configuration file.
<p>GCC can bootstrap with recent versions of IBM XLC, but bootstrapping
with an earlier release of GCC is recommended. Bootstrapping with XLC
requires a larger data segment, which can be enabled through the
<var>LDR_CNTRL</var> environment variable, e.g.,
<pre class="smallexample"> % LDR_CNTRL=MAXDATA=0x50000000
% export LDR_CNTRL
</pre>
<p>One can start with a pre-compiled version of GCC to build from
sources. One may delete GCC's “fixed” header files when starting
with a version of GCC built for an earlier release of AIX.
<p>To speed up the configuration phases of bootstrapping and installing GCC,
one may use GNU Bash instead of AIX <samp><span class="command">/bin/sh</span></samp>, e.g.,
<pre class="smallexample"> % CONFIG_SHELL=/opt/freeware/bin/bash
% export CONFIG_SHELL
</pre>
<p>and then proceed as described in <a href="build.html">the build instructions</a>, where we strongly recommend specifying an absolute path
to invoke <var>srcdir</var>/configure.
<p>Because GCC on AIX is built as a 32-bit executable by default,
(although it can generate 64-bit programs) the GMP and MPFR libraries
required by gfortran must be 32-bit libraries. Building GMP and MPFR
as static archive libraries works better than shared libraries.
<p>Errors involving <code>alloca</code> when building GCC generally are due
to an incorrect definition of <code>CC</code> in the Makefile or mixing files
compiled with the native C compiler and GCC. During the stage1 phase of
the build, the native AIX compiler <strong>must</strong> be invoked as <samp><span class="command">cc</span></samp>
(not <samp><span class="command">xlc</span></samp>). Once <samp><span class="command">configure</span></samp> has been informed of
<samp><span class="command">xlc</span></samp>, one needs to use ‘<samp><span class="samp">make distclean</span></samp>’ to remove the
configure cache files and ensure that <samp><span class="env">CC</span></samp> environment variable
does not provide a definition that will confuse <samp><span class="command">configure</span></samp>.
If this error occurs during stage2 or later, then the problem most likely
is the version of Make (see above).
<p>The native <samp><span class="command">as</span></samp> and <samp><span class="command">ld</span></samp> are recommended for bootstrapping
on AIX. The GNU Assembler, GNU Linker, and GNU Binutils version 2.20
is required to bootstrap on AIX 5. The native AIX tools do
interoperate with GCC.
<p>Building <samp><span class="file">libstdc++.a</span></samp> requires a fix for an AIX Assembler bug
APAR IY26685 (AIX 4.3) or APAR IY25528 (AIX 5.1). It also requires a
fix for another AIX Assembler bug and a co-dependent AIX Archiver fix
referenced as APAR IY53606 (AIX 5.2) or as APAR IY54774 (AIX 5.1)
<p>‘<samp><span class="samp">libstdc++</span></samp>’ in GCC 3.4 increments the major version number of the
shared object and GCC installation places the <samp><span class="file">libstdc++.a</span></samp>
shared library in a common location which will overwrite the and GCC
3.3 version of the shared library. Applications either need to be
re-linked against the new shared library or the GCC 3.1 and GCC 3.3
versions of the ‘<samp><span class="samp">libstdc++</span></samp>’ shared object needs to be available
to the AIX runtime loader. The GCC 3.1 ‘<samp><span class="samp">libstdc++.so.4</span></samp>’, if
present, and GCC 3.3 ‘<samp><span class="samp">libstdc++.so.5</span></samp>’ shared objects can be
installed for runtime dynamic loading using the following steps to set
the ‘<samp><span class="samp">F_LOADONLY</span></samp>’ flag in the shared object for <em>each</em>
multilib <samp><span class="file">libstdc++.a</span></samp> installed:
<p>Extract the shared objects from the currently installed
<samp><span class="file">libstdc++.a</span></samp> archive:
<pre class="smallexample"> % ar -x libstdc++.a libstdc++.so.4 libstdc++.so.5
</pre>
<p>Enable the ‘<samp><span class="samp">F_LOADONLY</span></samp>’ flag so that the shared object will be
available for runtime dynamic loading, but not linking:
<pre class="smallexample"> % strip -e libstdc++.so.4 libstdc++.so.5
</pre>
<p>Archive the runtime-only shared object in the GCC 3.4
<samp><span class="file">libstdc++.a</span></samp> archive:
<pre class="smallexample"> % ar -q libstdc++.a libstdc++.so.4 libstdc++.so.5
</pre>
<p>Linking executables and shared libraries may produce warnings of
duplicate symbols. The assembly files generated by GCC for AIX always
have included multiple symbol definitions for certain global variable
and function declarations in the original program. The warnings should
not prevent the linker from producing a correct library or runnable
executable.
<p>AIX 4.3 utilizes a “large format” archive to support both 32-bit and
64-bit object modules. The routines provided in AIX 4.3.0 and AIX 4.3.1
to parse archive libraries did not handle the new format correctly.
These routines are used by GCC and result in error messages during
linking such as “not a COFF file”. The version of the routines shipped
with AIX 4.3.1 should work for a 32-bit environment. The <samp><span class="option">-g</span></samp>
option of the archive command may be used to create archives of 32-bit
objects using the original “small format”. A correct version of the
routines is shipped with AIX 4.3.2 and above.
<p>Some versions of the AIX binder (linker) can fail with a relocation
overflow severe error when the <samp><span class="option">-bbigtoc</span></samp> option is used to link
GCC-produced object files into an executable that overflows the TOC. A fix
for APAR IX75823 (OVERFLOW DURING LINK WHEN USING GCC AND -BBIGTOC) is
available from IBM Customer Support and from its
<a href="http://techsupport.services.ibm.com/">techsupport.services.ibm.com</a>
website as PTF U455193.
<p>The AIX 4.3.2.1 linker (bos.rte.bind_cmds Level 4.3.2.1) will dump core
with a segmentation fault when invoked by any version of GCC. A fix for
APAR IX87327 is available from IBM Customer Support and from its
<a href="http://techsupport.services.ibm.com/">techsupport.services.ibm.com</a>
website as PTF U461879. This fix is incorporated in AIX 4.3.3 and above.
<p>The initial assembler shipped with AIX 4.3.0 generates incorrect object
files. A fix for APAR IX74254 (64BIT DISASSEMBLED OUTPUT FROM COMPILER FAILS
TO ASSEMBLE/BIND) is available from IBM Customer Support and from its
<a href="http://techsupport.services.ibm.com/">techsupport.services.ibm.com</a>
website as PTF U453956. This fix is incorporated in AIX 4.3.1 and above.
<p>AIX provides National Language Support (NLS). Compilers and assemblers
use NLS to support locale-specific representations of various data
formats including floating-point numbers (e.g., ‘<samp><span class="samp">.</span></samp>’ vs ‘<samp><span class="samp">,</span></samp>’ for
separating decimal fractions). There have been problems reported where
GCC does not produce the same floating-point formats that the assembler
expects. If one encounters this problem, set the <samp><span class="env">LANG</span></samp>
environment variable to ‘<samp><span class="samp">C</span></samp>’ or ‘<samp><span class="samp">En_US</span></samp>’.
<p>A default can be specified with the <samp><span class="option">-mcpu=</span><var>cpu_type</var></samp>
switch and using the configure option <samp><span class="option">--with-cpu-</span><var>cpu_type</var></samp>.
<p><hr />
<h3 class="heading"><a name="TOC21"></a><a name="iq2000_002dx_002delf"></a>iq2000-*-elf</h3>
<p>Vitesse IQ2000 processors. These are used in embedded
applications. There are no standard Unix configurations.
<p><hr />
<h3 class="heading"><a name="TOC22"></a><a name="lm32_002dx_002delf"></a>lm32-*-elf</h3>
<p>Lattice Mico32 processor.
This configuration is intended for embedded systems.
<p><hr />
<h3 class="heading"><a name="TOC23"></a><a name="lm32_002dx_002duclinux"></a>lm32-*-uclinux</h3>
<p>Lattice Mico32 processor.
This configuration is intended for embedded systems running uClinux.
<p><hr />
<h3 class="heading"><a name="TOC24"></a><a name="m32c_002dx_002delf"></a>m32c-*-elf</h3>
<p>Renesas M32C processor.
This configuration is intended for embedded systems.
<p><hr />
<h3 class="heading"><a name="TOC25"></a><a name="m32r_002dx_002delf"></a>m32r-*-elf</h3>
<p>Renesas M32R processor.
This configuration is intended for embedded systems.
<p><hr />
<h3 class="heading"><a name="TOC26"></a><a name="m6811_002delf"></a>m6811-elf</h3>
<p>Motorola 68HC11 family micro controllers. These are used in embedded
applications. There are no standard Unix configurations.
<p><hr />
<h3 class="heading"><a name="TOC27"></a><a name="m6812_002delf"></a>m6812-elf</h3>
<p>Motorola 68HC12 family micro controllers. These are used in embedded
applications. There are no standard Unix configurations.
<p><hr />
<h3 class="heading"><a name="TOC28"></a><a name="m68k_002dx_002dx"></a>m68k-*-*</h3>
<p>By default,
‘<samp><span class="samp">m68k-*-elf*</span></samp>’, ‘<samp><span class="samp">m68k-*-rtems</span></samp>’, ‘<samp><span class="samp">m68k-*-uclinux</span></samp>’ and
‘<samp><span class="samp">m68k-*-linux</span></samp>’
build libraries for both M680x0 and ColdFire processors. If you only
need the M680x0 libraries, you can omit the ColdFire ones by passing
<samp><span class="option">--with-arch=m68k</span></samp> to <samp><span class="command">configure</span></samp>. Alternatively, you
can omit the M680x0 libraries by passing <samp><span class="option">--with-arch=cf</span></samp> to
<samp><span class="command">configure</span></samp>. These targets default to 5206 or 5475 code as
appropriate for the target system when
configured with <samp><span class="option">--with-arch=cf</span></samp> and 68020 code otherwise.
<p>The ‘<samp><span class="samp">m68k-*-netbsd</span></samp>’ and
‘<samp><span class="samp">m68k-*-openbsd</span></samp>’ targets also support the <samp><span class="option">--with-arch</span></samp>
option. They will generate ColdFire CFV4e code when configured with
<samp><span class="option">--with-arch=cf</span></samp> and 68020 code otherwise.
<p>You can override the default processors listed above by configuring
with <samp><span class="option">--with-cpu=</span><var>target</var></samp>. This <var>target</var> can either
be a <samp><span class="option">-mcpu</span></samp> argument or one of the following values:
‘<samp><span class="samp">m68000</span></samp>’, ‘<samp><span class="samp">m68010</span></samp>’, ‘<samp><span class="samp">m68020</span></samp>’, ‘<samp><span class="samp">m68030</span></samp>’,
‘<samp><span class="samp">m68040</span></samp>’, ‘<samp><span class="samp">m68060</span></samp>’, ‘<samp><span class="samp">m68020-40</span></samp>’ and ‘<samp><span class="samp">m68020-60</span></samp>’.
<p><hr />
<h3 class="heading"><a name="TOC29"></a><a name="m68k_002dx_002duclinux"></a>m68k-*-uclinux</h3>
<p>GCC 4.3 changed the uClinux configuration so that it uses the
‘<samp><span class="samp">m68k-linux-gnu</span></samp>’ ABI rather than the ‘<samp><span class="samp">m68k-elf</span></samp>’ ABI.
It also added improved support for C++ and flat shared libraries,
both of which were ABI changes. However, you can still use the
original ABI by configuring for ‘<samp><span class="samp">m68k-uclinuxoldabi</span></samp>’ or
‘<samp><span class="samp">m68k-</span><var>vendor</var><span class="samp">-uclinuxoldabi</span></samp>’.
<p><hr />
<h3 class="heading"><a name="TOC30"></a><a name="mep_002dx_002delf"></a>mep-*-elf</h3>
<p>Toshiba Media embedded Processor.
This configuration is intended for embedded systems.
<p><hr />
<h3 class="heading"><a name="TOC31"></a><a name="mips_002dx_002dx"></a>mips-*-*</h3>
<p>If on a MIPS system you get an error message saying “does not have gp
sections for all it's [sic] sectons [sic]”, don't worry about it. This
happens whenever you use GAS with the MIPS linker, but there is not
really anything wrong, and it is okay to use the output file. You can
stop such warnings by installing the GNU linker.
<p>It would be nice to extend GAS to produce the gp tables, but they are
optional, and there should not be a warning about their absence.
<p>The libstdc++ atomic locking routines for MIPS targets requires MIPS II
and later. A patch went in just after the GCC 3.3 release to
make ‘<samp><span class="samp">mips*-*-*</span></samp>’ use the generic implementation instead. You can also
configure for ‘<samp><span class="samp">mipsel-elf</span></samp>’ as a workaround. The
‘<samp><span class="samp">mips*-*-linux*</span></samp>’ target continues to use the MIPS II routines. More
work on this is expected in future releases.
<!-- If you make -with-llsc the default for another target, please also -->
<!-- update the description of the -with-llsc option. -->
<p>The built-in <code>__sync_*</code> functions are available on MIPS II and
later systems and others that support the ‘<samp><span class="samp">ll</span></samp>’, ‘<samp><span class="samp">sc</span></samp>’ and
‘<samp><span class="samp">sync</span></samp>’ instructions. This can be overridden by passing
<samp><span class="option">--with-llsc</span></samp> or <samp><span class="option">--without-llsc</span></samp> when configuring GCC.
Since the Linux kernel emulates these instructions if they are
missing, the default for ‘<samp><span class="samp">mips*-*-linux*</span></samp>’ targets is
<samp><span class="option">--with-llsc</span></samp>. The <samp><span class="option">--with-llsc</span></samp> and
<samp><span class="option">--without-llsc</span></samp> configure options may be overridden at compile
time by passing the <samp><span class="option">-mllsc</span></samp> or <samp><span class="option">-mno-llsc</span></samp> options to
the compiler.
<p>MIPS systems check for division by zero (unless
<samp><span class="option">-mno-check-zero-division</span></samp> is passed to the compiler) by
generating either a conditional trap or a break instruction. Using
trap results in smaller code, but is only supported on MIPS II and
later. Also, some versions of the Linux kernel have a bug that
prevents trap from generating the proper signal (<code>SIGFPE</code>). To enable
the use of break, use the <samp><span class="option">--with-divide=breaks</span></samp>
<samp><span class="command">configure</span></samp> option when configuring GCC. The default is to
use traps on systems that support them.
<p>Cross-compilers for the MIPS as target using the MIPS assembler
currently do not work, because the auxiliary programs
<samp><span class="file">mips-tdump.c</span></samp> and <samp><span class="file">mips-tfile.c</span></samp> can't be compiled on
anything but a MIPS. It does work to cross compile for a MIPS
if you use the GNU assembler and linker.
<p>The assembler from GNU binutils 2.17 and earlier has a bug in the way
it sorts relocations for REL targets (o32, o64, EABI). This can cause
bad code to be generated for simple C++ programs. Also the linker
from GNU binutils versions prior to 2.17 has a bug which causes the
runtime linker stubs in very large programs, like <samp><span class="file">libgcj.so</span></samp>, to
be incorrectly generated. GNU Binutils 2.18 and later (and snapshots
made after Nov. 9, 2006) should be free from both of these problems.
<p><hr />
<h3 class="heading"><a name="TOC32"></a><a name="mips_002dsgi_002dirix5"></a>mips-sgi-irix5</h3>
<p>Support for IRIX 5 has been obsoleted in GCC 4.5, but can still be
enabled by configuring with <samp><span class="option">--enable-obsolete</span></samp>. Support will be
removed in GCC 4.6.
<p>In order to compile GCC on an SGI running IRIX 5, the ‘<samp><span class="samp">compiler_dev.hdr</span></samp>’
subsystem must be installed from the IDO CD-ROM supplied by SGI.
It is also available for download from
<a href="http://freeware.sgi.com/ido.html">http://freeware.sgi.com/ido.html</a>.
<p>If you use the MIPS C compiler to bootstrap, it may be necessary
to increase its table size for switch statements with the
<samp><span class="option">-Wf,-XNg1500</span></samp> option. If you use the <samp><span class="option">-O2</span></samp>
optimization option, you also need to use <samp><span class="option">-Olimit 3000</span></samp>.
<!-- FIXME: verify. -->
<p>GCC must be configured to use GNU <samp><span class="command">as</span></samp>. The latest version, from GNU
binutils 2.20.1, is known to work.
<p>To enable debugging under IRIX 5, you must use GNU binutils 2.15 or
later, and use the <samp><span class="option">--with-gnu-ld</span></samp> <samp><span class="command">configure</span></samp> option
when configuring GCC.
You need to use GNU <samp><span class="command">ar</span></samp> and <samp><span class="command">nm</span></samp>,
also distributed with GNU binutils.
<!-- FIXME: which parts of this are still true? -->
<p>Configuring GCC with <samp><span class="command">/bin/sh</span></samp> is <em>extremely</em> slow and may
even hang. This problem can be avoided by running <samp><span class="command">configure</span></samp>
like this:
<pre class="smallexample"> % CONFIG_SHELL=/usr/local/bin/bash
% export CONFIG_SHELL
% $CONFIG_SHELL <var>srcdir</var>/configure [<var>options</var>]
</pre>
<p class="noindent"><samp><span class="command">/bin/ksh</span></samp> doesn't work properly either.
<p><hr />
<h3 class="heading"><a name="TOC33"></a><a name="mips_002dsgi_002dirix6"></a>mips-sgi-irix6</h3>
<p>Support for IRIX 6 releases before 6.5 has been obsoleted in GCC 4.5,
but can still be enabled by configuring with <samp><span class="option">--enable-obsolete</span></samp>.
Support will be removed in GCC 4.6, which will also disable support for
the O32 ABI. It is <em>strongly</em> recommended to upgrade to at least
IRIX 6.5.18. This release introduced full ISO C99 support, though for
the N32 and N64 ABIs only.
<p>To build and use GCC on IRIX 6, you need the IRIX Development Foundation
(IDF) and IRIX Development Libraries (IDL). They are included with the
IRIX 6.5 media and can be downloaded from
<a href="http://freeware.sgi.com/idf_idl.html">http://freeware.sgi.com/idf_idl.html</a> for older IRIX 6 releases.
<p>If you are using SGI's MIPSpro <samp><span class="command">cc</span></samp> as your bootstrap compiler, you must
ensure that the N32 ABI is in use. To test this, compile a simple C
file with <samp><span class="command">cc</span></samp> and then run <samp><span class="command">file</span></samp> on the
resulting object file. The output should look like:
<pre class="smallexample"> test.o: ELF N32 MSB ...
</pre>
<p class="noindent">If you see:
<pre class="smallexample"> test.o: ELF 32-bit MSB ...
</pre>
<p class="noindent">or
<pre class="smallexample"> test.o: ELF 64-bit MSB ...
</pre>
<p class="noindent">then your version of <samp><span class="command">cc</span></samp> uses the O32 or N64 ABI by default. You
should set the environment variable <samp><span class="env">CC</span></samp> to ‘<samp><span class="samp">cc -n32</span></samp>’
before configuring GCC.
<p>If you want the resulting <samp><span class="command">gcc</span></samp> to run on old 32-bit systems
with the MIPS R4400 CPU, you need to ensure that only code for the ‘<samp><span class="samp">mips3</span></samp>’
instruction set architecture (ISA) is generated. While GCC 3.x does
this correctly, both GCC 2.95 and SGI's MIPSpro <samp><span class="command">cc</span></samp> may change
the ISA depending on the machine where GCC is built. Using one of them
as the bootstrap compiler may result in ‘<samp><span class="samp">mips4</span></samp>’ code, which won't run at
all on ‘<samp><span class="samp">mips3</span></samp>’-only systems. For the test program above, you should see:
<pre class="smallexample"> test.o: ELF N32 MSB mips-3 ...
</pre>
<p class="noindent">If you get:
<pre class="smallexample"> test.o: ELF N32 MSB mips-4 ...
</pre>
<p class="noindent">instead, you should set the environment variable <samp><span class="env">CC</span></samp> to ‘<samp><span class="samp">cc
-n32 -mips3</span></samp>’ or ‘<samp><span class="samp">gcc -mips3</span></samp>’ respectively before configuring GCC.
<p>MIPSpro C 7.4 may cause bootstrap failures, due to a bug when inlining
<code>memcmp</code>. Either add <code>-U__INLINE_INTRINSICS</code> to the <samp><span class="env">CC</span></samp>
environment variable as a workaround or upgrade to MIPSpro C 7.4.1m.
<p>GCC on IRIX 6 is usually built to support the N32, O32 and N64 ABIs. If
you build GCC on a system that doesn't have the N64 libraries installed
or cannot run 64-bit binaries,
you need to configure with <samp><span class="option">--disable-multilib</span></samp> so GCC doesn't
try to use them. This will disable building the O32 libraries, too.
Look for <samp><span class="file">/usr/lib64/libc.so.1</span></samp> to see if you
have the 64-bit libraries installed.
<p>GCC must be configured with GNU <samp><span class="command">as</span></samp>. The latest version, from GNU
binutils 2.20.1, is known to work. On the other hand, bootstrap fails
with GNU <samp><span class="command">ld</span></samp> at least since GNU binutils 2.17.
<p>The <samp><span class="option">--enable-libgcj</span></samp>
option is disabled by default: IRIX 6 uses a very low default limit
(20480) for the command line length. Although <samp><span class="command">libtool</span></samp> contains a
workaround for this problem, at least the N64 ‘<samp><span class="samp">libgcj</span></samp>’ is known not
to build despite this, running into an internal error of the native
<samp><span class="command">ld</span></samp>. A sure fix is to increase this limit (‘<samp><span class="samp">ncargs</span></samp>’) to
its maximum of 262144 bytes. If you have root access, you can use the
<samp><span class="command">systune</span></samp> command to do this.
<!-- FIXME: does this work with current libtool? -->
<p><code>wchar_t</code> support in ‘<samp><span class="samp">libstdc++</span></samp>’ is not available for old
IRIX 6.5.x releases, x < 19. The problem cannot be autodetected
and in order to build GCC for such targets you need to configure with
<samp><span class="option">--disable-wchar_t</span></samp>.
<p><hr />
<h3 class="heading"><a name="TOC34"></a><a name="moxie_002dx_002delf"></a>moxie-*-elf</h3>
<p>The moxie processor. See <a href="http://moxielogic.org/">http://moxielogic.org/</a> for more
information about this processor.
<p><hr />
<h3 class="heading"><a name="TOC35"></a><a name="powerpc_002dx_002dx"></a>powerpc-*-*</h3>
<p>You can specify a default version for the <samp><span class="option">-mcpu=</span><var>cpu_type</var></samp>
switch by using the configure option <samp><span class="option">--with-cpu-</span><var>cpu_type</var></samp>.
<p>You will need
<a href="ftp://ftp.kernel.org/pub/linux/devel/binutils">binutils 2.15</a>
or newer for a working GCC.
<p><hr />
<h3 class="heading"><a name="TOC36"></a><a name="powerpc_002dx_002ddarwin"></a>powerpc-*-darwin*</h3>
<p>PowerPC running Darwin (Mac OS X kernel).
<p>Pre-installed versions of Mac OS X may not include any developer tools,
meaning that you will not be able to build GCC from source. Tool
binaries are available at
<a href="http://developer.apple.com/darwin/projects/compiler/">http://developer.apple.com/darwin/projects/compiler/</a> (free
registration required).
<p>This version of GCC requires at least cctools-590.36. The
cctools-590.36 package referenced from
<a href="http://gcc.gnu.org/ml/gcc/2006-03/msg00507.html">http://gcc.gnu.org/ml/gcc/2006-03/msg00507.html</a> will not work
on systems older than 10.3.9 (aka darwin7.9.0).
<p><hr />
<h3 class="heading"><a name="TOC37"></a><a name="powerpc_002dx_002delf"></a>powerpc-*-elf</h3>
<p>PowerPC system in big endian mode, running System V.4.
<p><hr />
<h3 class="heading"><a name="TOC38"></a><a name="powerpc_002dx_002dlinux_002dgnu"></a>powerpc*-*-linux-gnu*</h3>
<p>PowerPC system in big endian mode running Linux.
<p><hr />
<h3 class="heading"><a name="TOC39"></a><a name="powerpc_002dx_002dnetbsd"></a>powerpc-*-netbsd*</h3>
<p>PowerPC system in big endian mode running NetBSD.
<p><hr />
<h3 class="heading"><a name="TOC40"></a><a name="powerpc_002dx_002deabisim"></a>powerpc-*-eabisim</h3>
<p>Embedded PowerPC system in big endian mode for use in running under the
PSIM simulator.
<p><hr />
<h3 class="heading"><a name="TOC41"></a><a name="powerpc_002dx_002deabi"></a>powerpc-*-eabi</h3>
<p>Embedded PowerPC system in big endian mode.
<p><hr />
<h3 class="heading"><a name="TOC42"></a><a name="powerpcle_002dx_002delf"></a>powerpcle-*-elf</h3>
<p>PowerPC system in little endian mode, running System V.4.
<p><hr />
<h3 class="heading"><a name="TOC43"></a><a name="powerpcle_002dx_002deabisim"></a>powerpcle-*-eabisim</h3>
<p>Embedded PowerPC system in little endian mode for use in running under
the PSIM simulator.
<p><hr />
<h3 class="heading"><a name="TOC44"></a><a name="powerpcle_002dx_002deabi"></a>powerpcle-*-eabi</h3>
<p>Embedded PowerPC system in little endian mode.
<p><hr />
<h3 class="heading"><a name="TOC45"></a><a name="rx_002dx_002delf"></a>rx-*-elf</h3>
<p>The Renesas RX processor. See
<a href="http://eu.renesas.com/fmwk.jsp?cnt=rx600_series_landing.jsp&fp=/products/mpumcu/rx_family/rx600_series">http://eu.renesas.com/fmwk.jsp?cnt=rx600_series_landing.jsp&fp=/products/mpumcu/rx_family/rx600_series</a>
for more information about this processor.
<p><hr />
<h3 class="heading"><a name="TOC46"></a><a name="s390_002dx_002dlinux"></a>s390-*-linux*</h3>
<p>S/390 system running GNU/Linux for S/390.
<p><hr />
<h3 class="heading"><a name="TOC47"></a><a name="s390x_002dx_002dlinux"></a>s390x-*-linux*</h3>
<p>zSeries system (64-bit) running GNU/Linux for zSeries.
<p><hr />
<h3 class="heading"><a name="TOC48"></a><a name="s390x_002dibm_002dtpf"></a>s390x-ibm-tpf*</h3>
<p>zSeries system (64-bit) running TPF. This platform is
supported as cross-compilation target only.
<p><hr /><!-- Please use Solaris 2 to refer to all release of Solaris, starting -->
<!-- with 2.0 until 2.6, 7, 8, etc. Solaris 1 was a marketing name for -->
<!-- SunOS 4 releases which we don't use to avoid confusion. Solaris -->
<!-- alone is too unspecific and must be avoided. -->
<h3 class="heading"><a name="TOC49"></a><a name="x_002dx_002dsolaris2"></a>*-*-solaris2*</h3>
<p>Support for Solaris 7 has been obsoleted in GCC 4.5, but can still be
enabled by configuring with <samp><span class="option">--enable-obsolete</span></samp>. Support will be
removed in GCC 4.6.
<p>Sun does not ship a C compiler with Solaris 2, though you can download
the Sun Studio compilers for free from
<a href="http://developers.sun.com/sunstudio/downloads/">http://developers.sun.com/sunstudio/downloads/</a>. Alternatively,
you can install a pre-built GCC to bootstrap and install GCC. See the
<a href="binaries.html">binaries page</a> for details.
<p>The Solaris 2 <samp><span class="command">/bin/sh</span></samp> will often fail to configure
‘<samp><span class="samp">libstdc++-v3</span></samp>’, ‘<samp><span class="samp">boehm-gc</span></samp>’ or ‘<samp><span class="samp">libjava</span></samp>’. We therefore
recommend using the following initial sequence of commands
<pre class="smallexample"> % CONFIG_SHELL=/bin/ksh
% export CONFIG_SHELL
</pre>
<p class="noindent">and proceed as described in <a href="configure.html">the configure instructions</a>.
In addition we strongly recommend specifying an absolute path to invoke
<samp><var>srcdir</var><span class="command">/configure</span></samp>.
<p>Solaris 2 comes with a number of optional OS packages. Some of these
are needed to use GCC fully, namely <code>SUNWarc</code>,
<code>SUNWbtool</code>, <code>SUNWesu</code>, <code>SUNWhea</code>, <code>SUNWlibm</code>,
<code>SUNWsprot</code>, and <code>SUNWtoo</code>. If you did not install all
optional packages when installing Solaris 2, you will need to verify that
the packages that GCC needs are installed.
<p>To check whether an optional package is installed, use
the <samp><span class="command">pkginfo</span></samp> command. To add an optional package, use the
<samp><span class="command">pkgadd</span></samp> command. For further details, see the Solaris 2
documentation.
<p>Trying to use the linker and other tools in
<samp><span class="file">/usr/ucb</span></samp> to install GCC has been observed to cause trouble.
For example, the linker may hang indefinitely. The fix is to remove
<samp><span class="file">/usr/ucb</span></samp> from your <samp><span class="env">PATH</span></samp>.
<p>The build process works more smoothly with the legacy Sun tools so, if you
have <samp><span class="file">/usr/xpg4/bin</span></samp> in your <samp><span class="env">PATH</span></samp>, we recommend that you place
<samp><span class="file">/usr/bin</span></samp> before <samp><span class="file">/usr/xpg4/bin</span></samp> for the duration of the build.
<p>We recommend the use of the Sun assembler or the GNU assembler, in
conjunction with the Sun linker. The GNU <samp><span class="command">as</span></samp>
versions included in Solaris 10, from GNU binutils 2.15, and Solaris 11,
from GNU binutils 2.19, are known to work. They can be found in
<samp><span class="file">/usr/sfw/bin/gas</span></samp>. Current versions of GNU binutils (2.20.1)
are known to work as well. Note that your mileage may vary
if you use a combination of the GNU tools and the Sun tools: while the
combination GNU <samp><span class="command">as</span></samp> + Sun <samp><span class="command">ld</span></samp> should reasonably work,
the reverse combination Sun <samp><span class="command">as</span></samp> + GNU <samp><span class="command">ld</span></samp> is known to
cause memory corruption at runtime in some cases for C++ programs.
<!-- FIXME: still? -->
GNU <samp><span class="command">ld</span></samp> usually works as well, although the version included in
Solaris 10 cannot be used due to several bugs. Again, the current
version (2.20.1) is known to work, but generally lacks platform specific
features, so better stay with Sun <samp><span class="command">ld</span></samp>.
<p>Sun bug 4296832 turns up when compiling X11 headers with GCC 2.95 or
newer: <samp><span class="command">g++</span></samp> will complain that types are missing. These headers
assume that omitting the type means <code>int</code>; this assumption worked for
C90 but is wrong for C++, and is now wrong for C99 also.
<p><samp><span class="command">g++</span></samp> accepts such (invalid) constructs with the option
<samp><span class="option">-fpermissive</span></samp>; it will assume that any missing type is <code>int</code>
(as defined by C90).
<p>There are patches for Solaris 7 (108376-21 or newer for SPARC,
108377-20 for Intel), and Solaris 8 (108652-24 or newer for SPARC,
108653-22 for Intel) that fix this bug.
<p>Sun bug 4927647 sometimes causes random spurious testsuite failures
related to missing diagnostic output. This bug doesn't affect GCC
itself, rather it is a kernel bug triggered by the <samp><span class="command">expect</span></samp>
program which is used only by the GCC testsuite driver. When the bug
causes the <samp><span class="command">expect</span></samp> program to miss anticipated output, extra
testsuite failures appear.
<p>There are patches for Solaris 8 (117350-12 or newer for SPARC,
117351-12 or newer for Intel) and Solaris 9 (117171-11 or newer for
SPARC, 117172-11 or newer for Intel) that address this problem.
<p><hr />
<h3 class="heading"><a name="TOC50"></a><a name="sparc_002dsun_002dsolaris2"></a>sparc-sun-solaris2*</h3>
<p>When GCC is configured to use GNU binutils 2.14 or later, the binaries
produced are smaller than the ones produced using Sun's native tools;
this difference is quite significant for binaries containing debugging
information.
<p>Starting with Solaris 7, the operating system is capable of executing
64-bit SPARC V9 binaries. GCC 3.1 and later properly supports
this; the <samp><span class="option">-m64</span></samp> option enables 64-bit code generation.
However, if all you want is code tuned for the UltraSPARC CPU, you
should try the <samp><span class="option">-mtune=ultrasparc</span></samp> option instead, which produces
code that, unlike full 64-bit code, can still run on non-UltraSPARC
machines.
<p>When configuring on a Solaris 7 or later system that is running a kernel
that supports only 32-bit binaries, one must configure with
<samp><span class="option">--disable-multilib</span></samp>, since we will not be able to build the
64-bit target libraries.
<p>GCC 3.3 and GCC 3.4 trigger code generation bugs in earlier versions of
the GNU compiler (especially GCC 3.0.x versions), which lead to the
miscompilation of the stage1 compiler and the subsequent failure of the
bootstrap process. A workaround is to use GCC 3.2.3 as an intermediary
stage, i.e. to bootstrap that compiler with the base compiler and then
use it to bootstrap the final compiler.
<p>GCC 3.4 triggers a code generation bug in versions 5.4 (Sun ONE Studio 7)
and 5.5 (Sun ONE Studio 8) of the Sun compiler, which causes a bootstrap
failure in form of a miscompilation of the stage1 compiler by the Sun
compiler. This is Sun bug 4974440. This is fixed with patch 112760-07.
<p>GCC 3.4 changed the default debugging format from Stabs to DWARF-2 for
32-bit code on Solaris 7 and later. If you use the Sun assembler, this
change apparently runs afoul of Sun bug 4910101 (which is referenced as
an x86-only problem by Sun, probably because they do not use DWARF-2).
A symptom of the problem is that you cannot compile C++ programs like
<samp><span class="command">groff</span></samp> 1.19.1 without getting messages similar to the following:
<pre class="smallexample"> ld: warning: relocation error: R_SPARC_UA32: ...
external symbolic relocation against non-allocatable section
.debug_info cannot be processed at runtime: relocation ignored.
</pre>
<p class="noindent">To work around this problem, compile with <samp><span class="option">-gstabs+</span></samp> instead of
plain <samp><span class="option">-g</span></samp>.
<p>When configuring the GNU Multiple Precision Library (GMP) or the MPFR
library on a Solaris 7 or later system, the canonical target triplet
must be specified as the <samp><span class="command">build</span></samp> parameter on the configure
line. This triplet can be obtained by invoking <samp><span class="command">./config.guess</span></samp> in
the toplevel source directory of GCC (and not that of GMP or MPFR).
For example on a Solaris 7 system:
<pre class="smallexample"> % ./configure --build=sparc-sun-solaris2.7 --prefix=xxx
</pre>
<p><hr />
<h3 class="heading"><a name="TOC51"></a><a name="sparc_002dsun_002dsolaris27"></a>sparc-sun-solaris2.7</h3>
<p><em>Note</em> that this configuration has been obsoleted in GCC 4.5, and will be
removed in GCC 4.6.
<p>Sun patch 107058-01 (1999-01-13) for Solaris 7/SPARC triggers a bug in
the dynamic linker. This problem (Sun bug 4210064) affects GCC 2.8
and later, including all EGCS releases. Sun formerly recommended
107058-01 for all Solaris 7 users, but around 1999-09-01 it started to
recommend it only for people who use Sun's compilers.
<p>Here are some workarounds to this problem:
<ul>
<li>Do not install Sun patch 107058-01 until after Sun releases a
complete patch for bug 4210064. This is the simplest course to take,
unless you must also use Sun's C compiler. Unfortunately 107058-01
is preinstalled on some new Solaris 7-based hosts, so you may have to
back it out.
<li>Copy the original, unpatched Solaris 7
<samp><span class="command">/usr/ccs/bin/as</span></samp> into
<samp><span class="command">/usr/local/libexec/gcc/sparc-sun-solaris2.7/3.4/as</span></samp>,
adjusting the latter name to fit your local conventions and software
version numbers.
<li>Install Sun patch 106950-03 (1999-05-25) or later. Nobody with
both 107058-01 and 106950-03 installed has reported the bug with GCC
and Sun's dynamic linker. This last course of action is riskiest,
for two reasons. First, you must install 106950 on all hosts that
run code generated by GCC; it doesn't suffice to install it only on
the hosts that run GCC itself. Second, Sun says that 106950-03 is
only a partial fix for bug 4210064, but Sun doesn't know whether the
partial fix is adequate for GCC. Revision -08 or later should fix
the bug. The current (as of 2004-05-23) revision is -24, and is included in
the Solaris 7 Recommended Patch Cluster.
</ul>
<p>GCC 3.3 triggers a bug in version 5.0 Alpha 03/27/98 of the Sun assembler,
which causes a bootstrap failure when linking the 64-bit shared version of
‘<samp><span class="samp">libgcc</span></samp>’. A typical error message is:
<pre class="smallexample"> ld: fatal: relocation error: R_SPARC_32: file libgcc/sparcv9/_muldi3.o:
symbol <unknown>: offset 0xffffffff7ec133e7 is non-aligned.
</pre>
<p class="noindent">This bug has been fixed in the final 5.0 version of the assembler.
<p>A similar problem was reported for version Sun WorkShop 6 99/08/18 of the
Sun assembler, which causes a bootstrap failure with GCC 4.0.0:
<pre class="smallexample"> ld: fatal: relocation error: R_SPARC_DISP32:
file .libs/libstdc++.lax/libsupc++convenience.a/vterminate.o:
symbol <unknown>: offset 0xfccd33ad is non-aligned
</pre>
<p class="noindent">This bug has been fixed in more recent revisions of the assembler.
<p><hr />
<h3 class="heading"><a name="TOC52"></a><a name="sparc_002dsun_002dsolaris210"></a>sparc-sun-solaris2.10</h3>
<p>There is a bug in older versions of the Sun assembler which breaks
thread-local storage (TLS). A typical error message is
<pre class="smallexample"> ld: fatal: relocation error: R_SPARC_TLS_LE_HIX22: file /var/tmp//ccamPA1v.o:
symbol <unknown>: bad symbol type SECT: symbol type must be TLS
</pre>
<p class="noindent">This bug is fixed in Sun patch 118683-03 or later.
<p><hr />
<h3 class="heading"><a name="TOC53"></a><a name="sparc_002dx_002dlinux"></a>sparc-*-linux*</h3>
<p>GCC versions 3.0 and higher require binutils 2.11.2 and glibc 2.2.4
or newer on this platform. All earlier binutils and glibc
releases mishandled unaligned relocations on <code>sparc-*-*</code> targets.
<p><hr />
<h3 class="heading"><a name="TOC54"></a><a name="sparc64_002dx_002dsolaris2"></a>sparc64-*-solaris2*</h3>
<p>When configuring the GNU Multiple Precision Library (GMP) or the
MPFR library, the canonical target triplet must be specified as
the <samp><span class="command">build</span></samp> parameter on the configure line. For example
on a Solaris 7 system:
<pre class="smallexample"> % ./configure --build=sparc64-sun-solaris2.7 --prefix=xxx
</pre>
<p>The following compiler flags must be specified in the configure
step in order to bootstrap this target with the Sun compiler:
<pre class="smallexample"> % CC="cc -xarch=v9 -xildoff" <var>srcdir</var>/configure [<var>options</var>] [<var>target</var>]
</pre>
<p class="noindent"><samp><span class="option">-xarch=v9</span></samp> specifies the SPARC-V9 architecture to the Sun toolchain
and <samp><span class="option">-xildoff</span></samp> turns off the incremental linker.
<p><hr />
<h3 class="heading"><a name="TOC55"></a><a name="sparcv9_002dx_002dsolaris2"></a>sparcv9-*-solaris2*</h3>
<p>This is a synonym for ‘<samp><span class="samp">sparc64-*-solaris2*</span></samp>’.
<p><hr />
<h3 class="heading"><a name="TOC56"></a><a name="x_002dx_002dvxworks"></a>*-*-vxworks*</h3>
<p>Support for VxWorks is in flux. At present GCC supports <em>only</em> the
very recent VxWorks 5.5 (aka Tornado 2.2) release, and only on PowerPC.
We welcome patches for other architectures supported by VxWorks 5.5.
Support for VxWorks AE would also be welcome; we believe this is merely
a matter of writing an appropriate “configlette” (see below). We are
not interested in supporting older, a.out or COFF-based, versions of
VxWorks in GCC 3.
<p>VxWorks comes with an older version of GCC installed in
<samp><var>$WIND_BASE</var><span class="file">/host</span></samp>; we recommend you do not overwrite it.
Choose an installation <var>prefix</var> entirely outside <var>$WIND_BASE</var>.
Before running <samp><span class="command">configure</span></samp>, create the directories <samp><var>prefix</var></samp>
and <samp><var>prefix</var><span class="file">/bin</span></samp>. Link or copy the appropriate assembler,
linker, etc. into <samp><var>prefix</var><span class="file">/bin</span></samp>, and set your <var>PATH</var> to
include that directory while running both <samp><span class="command">configure</span></samp> and
<samp><span class="command">make</span></samp>.
<p>You must give <samp><span class="command">configure</span></samp> the
<samp><span class="option">--with-headers=</span><var>$WIND_BASE</var><span class="option">/target/h</span></samp> switch so that it can
find the VxWorks system headers. Since VxWorks is a cross compilation
target only, you must also specify <samp><span class="option">--target=</span><var>target</var></samp>.
<samp><span class="command">configure</span></samp> will attempt to create the directory
<samp><var>prefix</var><span class="file">/</span><var>target</var><span class="file">/sys-include</span></samp> and copy files into it;
make sure the user running <samp><span class="command">configure</span></samp> has sufficient privilege
to do so.
<p>GCC's exception handling runtime requires a special “configlette”
module, <samp><span class="file">contrib/gthr_supp_vxw_5x.c</span></samp>. Follow the instructions in
that file to add the module to your kernel build. (Future versions of
VxWorks will incorporate this module.)
<p><hr />
<h3 class="heading"><a name="TOC57"></a><a name="x86_002d64_002dx_002dx"></a>x86_64-*-*, amd64-*-*</h3>
<p>GCC supports the x86-64 architecture implemented by the AMD64 processor
(amd64-*-* is an alias for x86_64-*-*) on GNU/Linux, FreeBSD and NetBSD.
On GNU/Linux the default is a bi-arch compiler which is able to generate
both 64-bit x86-64 and 32-bit x86 code (via the <samp><span class="option">-m32</span></samp> switch).
<p><hr />
<h3 class="heading"><a name="TOC58"></a><a name="xtensa_002dx_002delf"></a>xtensa*-*-elf</h3>
<p>This target is intended for embedded Xtensa systems using the
‘<samp><span class="samp">newlib</span></samp>’ C library. It uses ELF but does not support shared
objects. Designed-defined instructions specified via the
Tensilica Instruction Extension (TIE) language are only supported
through inline assembly.
<p>The Xtensa configuration information must be specified prior to
building GCC. The <samp><span class="file">include/xtensa-config.h</span></samp> header
file contains the configuration information. If you created your
own Xtensa configuration with the Xtensa Processor Generator, the
downloaded files include a customized copy of this header file,
which you can use to replace the default header file.
<p><hr />
<h3 class="heading"><a name="TOC59"></a><a name="xtensa_002dx_002dlinux"></a>xtensa*-*-linux*</h3>
<p>This target is for Xtensa systems running GNU/Linux. It supports ELF
shared objects and the GNU C library (glibc). It also generates
position-independent code (PIC) regardless of whether the
<samp><span class="option">-fpic</span></samp> or <samp><span class="option">-fPIC</span></samp> options are used. In other
respects, this target is the same as the
<a href="#xtensa*-*-elf">‘<samp><span class="samp">xtensa*-*-elf</span></samp>’</a> target.
<p><hr />
<h3 class="heading"><a name="TOC60"></a><a name="windows"></a>Microsoft Windows</h3>
<h4 class="subheading"><a name="TOC61"></a>Intel 16-bit versions</h4>
<p>The 16-bit versions of Microsoft Windows, such as Windows 3.1, are not
supported.
<p>However, the 32-bit port has limited support for Microsoft
Windows 3.11 in the Win32s environment, as a target only. See below.
<h4 class="subheading"><a name="TOC62"></a>Intel 32-bit versions</h4>
<p>The 32-bit versions of Windows, including Windows 95, Windows NT, Windows
XP, and Windows Vista, are supported by several different target
platforms. These targets differ in which Windows subsystem they target
and which C libraries are used.
<ul>
<li>Cygwin <a href="#x-x-cygwin">*-*-cygwin</a>: Cygwin provides a user-space
Linux API emulation layer in the Win32 subsystem.
<li>Interix <a href="#x-x-interix">*-*-interix</a>: The Interix subsystem
provides native support for POSIX.
<li>MinGW <a href="#x-x-mingw32">*-*-mingw32</a>: MinGW is a native GCC port for
the Win32 subsystem that provides a subset of POSIX.
<li>MKS i386-pc-mks: NuTCracker from MKS. See
<a href="http://www.mkssoftware.com/">http://www.mkssoftware.com/</a> for more information.
</ul>
<h4 class="subheading"><a name="TOC63"></a>Intel 64-bit versions</h4>
<p>GCC contains support for x86-64 using the mingw-w64
runtime library, available from <a href="http://mingw-w64.sourceforge.net/">http://mingw-w64.sourceforge.net/</a>.
This library should be used with the target triple x86_64-pc-mingw32.
<p>Presently Windows for Itanium is not supported.
<h4 class="subheading"><a name="TOC64"></a>Windows CE</h4>
<p>Windows CE is supported as a target only on ARM (arm-wince-pe), Hitachi
SuperH (sh-wince-pe), and MIPS (mips-wince-pe).
<h4 class="subheading"><a name="TOC65"></a>Other Windows Platforms</h4>
<p>GCC no longer supports Windows NT on the Alpha or PowerPC.
<p>GCC no longer supports the Windows POSIX subsystem. However, it does
support the Interix subsystem. See above.
<p>Old target names including *-*-winnt and *-*-windowsnt are no longer used.
<p>PW32 (i386-pc-pw32) support was never completed, and the project seems to
be inactive. See <a href="http://pw32.sourceforge.net/">http://pw32.sourceforge.net/</a> for more information.
<p>UWIN support has been removed due to a lack of maintenance.
<p><hr />
<h3 class="heading"><a name="TOC66"></a><a name="x_002dx_002dcygwin"></a>*-*-cygwin</h3>
<p>Ports of GCC are included with the
<a href="http://www.cygwin.com/">Cygwin environment</a>.
<p>GCC will build under Cygwin without modification; it does not build
with Microsoft's C++ compiler and there are no plans to make it do so.
<p>The Cygwin native compiler can be configured to target any 32-bit x86
cpu architecture desired; the default is i686-pc-cygwin. It should be
used with as up-to-date a version of binutils as possible; use either
the latest official GNU binutils release in the Cygwin distribution,
or version 2.20 or above if building your own.
<p><hr />
<h3 class="heading"><a name="TOC67"></a><a name="x_002dx_002dinterix"></a>*-*-interix</h3>
<p>The Interix target is used by OpenNT, Interix, Services For UNIX (SFU),
and Subsystem for UNIX-based Applications (SUA). Applications compiled
with this target run in the Interix subsystem, which is separate from
the Win32 subsystem. This target was last known to work in GCC 3.3.
<p>For more information, see <a href="http://www.interix.com/">http://www.interix.com/</a>.
<p><hr />
<h3 class="heading"><a name="TOC68"></a><a name="x_002dx_002dmingw32"></a>*-*-mingw32</h3>
<p>GCC will build with and support only MinGW runtime 3.12 and later.
Earlier versions of headers are incompatible with the new default semantics
of <code>extern inline</code> in <code>-std=c99</code> and <code>-std=gnu99</code> modes.
<p><hr />
<h3 class="heading"><a name="TOC69"></a><a name="older"></a>Older systems</h3>
<p>GCC contains support files for many older (1980s and early
1990s) Unix variants. For the most part, support for these systems
has not been deliberately removed, but it has not been maintained for
several years and may suffer from bitrot.
<p>Starting with GCC 3.1, each release has a list of “obsoleted” systems.
Support for these systems is still present in that release, but
<samp><span class="command">configure</span></samp> will fail unless the <samp><span class="option">--enable-obsolete</span></samp>
option is given. Unless a maintainer steps forward, support for these
systems will be removed from the next release of GCC.
<p>Support for old systems as hosts for GCC can cause problems if the
workarounds for compiler, library and operating system bugs affect the
cleanliness or maintainability of the rest of GCC. In some cases, to
bring GCC up on such a system, if still possible with current GCC, may
require first installing an old version of GCC which did work on that
system, and using it to compile a more recent GCC, to avoid bugs in the
vendor compiler. Old releases of GCC 1 and GCC 2 are available in the
<samp><span class="file">old-releases</span></samp> directory on the <a href="../mirrors.html">GCC mirror sites</a>. Header bugs may generally be avoided using
<samp><span class="command">fixincludes</span></samp>, but bugs or deficiencies in libraries and the
operating system may still cause problems.
<p>Support for older systems as targets for cross-compilation is less
problematic than support for them as hosts for GCC; if an enthusiast
wishes to make such a target work again (including resurrecting any of
the targets that never worked with GCC 2, starting from the last
version before they were removed), patches
<a href="../contribute.html">following the usual requirements</a> would be
likely to be accepted, since they should not affect the support for more
modern targets.
<p>For some systems, old versions of GNU binutils may also be useful,
and are available from <samp><span class="file">pub/binutils/old-releases</span></samp> on
<a href="http://sourceware.org/mirrors.html">sourceware.org mirror sites</a>.
<p>Some of the information on specific systems above relates to
such older systems, but much of the information
about GCC on such systems (which may no longer be applicable to
current GCC) is to be found in the GCC texinfo manual.
<p><hr />
<h3 class="heading"><a name="TOC70"></a><a name="elf"></a>all ELF targets (SVR4, Solaris 2, etc.)</h3>
<p>C++ support is significantly better on ELF targets if you use the
<a href="./configure.html#with-gnu-ld">GNU linker</a>; duplicate copies of
inlines, vtables and template instantiations will be discarded
automatically.
<p><hr />
<p><a href="./index.html">Return to the GCC Installation page</a>
<!-- ***Old documentation****************************************************** -->
<!-- ***GFDL******************************************************************** -->
<!-- *************************************************************************** -->
<!-- Part 6 The End of the Document -->
</body></html>
Go to most recent revision | Compare with Previous | Blame | View Log