URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [ada/] [sinput.ads] - Rev 414
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S I N P U T -- -- -- -- S p e c -- -- -- -- Copyright (C) 1992-2009, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. -- -- -- -- As a special exception under Section 7 of GPL version 3, you are granted -- -- additional permissions described in the GCC Runtime Library Exception, -- -- version 3.1, as published by the Free Software Foundation. -- -- -- -- You should have received a copy of the GNU General Public License and -- -- a copy of the GCC Runtime Library Exception along with this program; -- -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -- -- <http://www.gnu.org/licenses/>. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ -- This package contains the input routines used for reading the -- input source file. The actual I/O routines are in OS_Interface, -- with this module containing only the system independent processing. -- General Note: throughout the compiler, we use the term line or source -- line to refer to a physical line in the source, terminated by the end of -- physical line sequence. -- There are two distinct concepts of line terminator in GNAT -- A logical line terminator is what corresponds to the "end of a line" as -- described in RM 2.2 (13). Any of the characters FF, LF, CR or VT or any -- wide character that is a Line or Paragraph Separator acts as an end of -- logical line in this sense, and it is essentially irrelevant whether one -- or more appears in sequence (since if sequence of such characters is -- regarded as separate ends of line, then the intervening logical lines -- are null in any case). -- A physical line terminator is a sequence of format effectors that is -- treated as ending a physical line. Physical lines have no Ada semantic -- significance, but they are significant for error reporting purposes, -- since errors are identified by line and column location. -- In GNAT, a physical line is ended by any of the sequences LF, CR/LF, or -- CR. LF is used in typical Unix systems, CR/LF in DOS systems, and CR -- alone in System 7. In addition, we recognize any of these sequences in -- any of the operating systems, for better behavior in treating foreign -- files (e.g. a Unix file with LF terminators transferred to a DOS system). -- Finally, wide character codes in categories Separator, Line and Separator, -- Paragraph are considered to be physical line terminators. with Alloc; with Casing; use Casing; with Namet; use Namet; with Table; with Types; use Types; package Sinput is type Type_Of_File is ( -- Indicates type of file being read Src, -- Normal Ada source file Config, -- Configuration pragma file Def, -- Preprocessing definition file Preproc); -- Source file with preprocessing commands to be preprocessed ---------------------------- -- Source License Control -- ---------------------------- -- The following type indicates the license state of a source if it -- is known. type License_Type is (Unknown, -- Licensing status of this source unit is unknown Restricted, -- This is a non-GPL'ed unit that is restricted from depending -- on GPL'ed units (e.g. proprietary code is in this category) GPL, -- This file is licensed under the unmodified GPL. It is not allowed -- to depend on Non_GPL units, and Non_GPL units may not depend on -- this source unit. Modified_GPL, -- This file is licensed under the GNAT modified GPL (see header of -- This file for wording of the modification). It may depend on other -- Modified_GPL units or on unrestricted units. Unrestricted); -- The license on this file is permitted to depend on any other -- units, or have other units depend on it, without violating the -- license of this unit. Examples are public domain units, and -- units defined in the RM). -- The above license status is checked when the appropriate check is -- activated and one source depends on another, and the licensing state -- of both files is known: -- The prohibited combinations are: -- Restricted file may not depend on GPL file -- GPL file may not depend on Restricted file -- Modified GPL file may not depend on Restricted file -- Modified_GPL file may not depend on GPL file -- The reason for the last restriction here is that a client depending -- on a modified GPL file must be sure that the license condition is -- correct considered transitively. -- The licensing status is determined either by the presence of a -- specific pragma License, or by scanning the header for a predefined -- file, or any file if compiling in -gnatg mode. ----------------------- -- Source File Table -- ----------------------- -- The source file table has an entry for each source file read in for -- this run of the compiler. This table is (default) initialized when -- the compiler is loaded, and simply accumulates entries as compilation -- proceeds and various routines in Sinput and its child packages are -- called to load required source files. -- Virtual entries are also created for generic templates when they are -- instantiated, as described in a separate section later on. -- In the case where there are multiple main units (e.g. in the case of -- the cross-reference tool), this table is not reset between these units, -- so that a given source file is only read once if it is used by two -- separate main units. -- The entries in the table are accessed using a Source_File_Index that -- ranges from 1 to Last_Source_File. Each entry has the following fields -- Note: fields marked read-only are set by Sinput or one of its child -- packages when a source file table entry is created, and cannot be -- subsequently modified, or alternatively are set only by very special -- circumstances, documented in the comments. -- File_Name : File_Name_Type (read-only) -- Name of the source file (simple name with no directory information) -- Full_File_Name : File_Name_Type (read-only) -- Full file name (full name with directory info), used for generation -- of error messages, etc. -- File_Type : Type_Of_File (read-only) -- Indicates type of file (source file, configuration pragmas file, -- preprocessor definition file, preprocessor input file). -- Reference_Name : File_Name_Type (read-only) -- Name to be used for source file references in error messages where -- only the simple name of the file is required. Identical to File_Name -- unless pragma Source_Reference is used to change it. Only processing -- for the Source_Reference pragma circuit may set this field. -- Full_Ref_Name : File_Name_Type (read-only) -- Name to be used for source file references in error messages where -- the full name of the file is required. Identical to Full_File_Name -- unless pragma Source_Reference is used to change it. Only processing -- for the Source_Reference pragma may set this field. -- Debug_Source_Name : File_Name_Type (read-only) -- Name to be used for source file references in debugging information -- where only the simple name of the file is required. Identical to -- Reference_Name unless the -gnatD (debug source file) switch is used. -- Only processing in Sprint that generates this file is permitted to -- set this field. -- Full_Debug_Name : File_Name_Type (read-only) -- Name to be used for source file references in debugging information -- where the full name of the file is required. This is identical to -- Full_Ref_Name unless the -gnatD (debug source file) switch is used. -- Only processing in Sprint that generates this file is permitted to -- set this field. -- License : License_Type; -- License status of source file -- Num_SRef_Pragmas : Nat; -- Number of source reference pragmas present in source file -- First_Mapped_Line : Logical_Line_Number; -- This field stores logical line number of the first line in the -- file that is not a Source_Reference pragma. If no source reference -- pragmas are used, then the value is set to No_Line_Number. -- Source_Text : Source_Buffer_Ptr (read-only) -- Text of source file. Note that every source file has a distinct set -- of non-overlapping logical bounds, so it is possible to determine -- which file is referenced from a given subscript (Source_Ptr) value. -- Source_First : Source_Ptr; (read-only) -- Subscript of first character in Source_Text. Note that this cannot -- be obtained as Source_Text'First, because we use virtual origin -- addressing. -- Source_Last : Source_Ptr; (read-only) -- Subscript of last character in Source_Text. Note that this cannot -- be obtained as Source_Text'Last, because we use virtual origin -- addressing, so this value is always Source_Ptr'Last. -- Time_Stamp : Time_Stamp_Type; (read-only) -- Time stamp of the source file -- Source_Checksum : Word; -- Computed checksum for contents of source file. See separate section -- later on in this spec for a description of the checksum algorithm. -- Last_Source_Line : Physical_Line_Number; -- Physical line number of last source line. While a file is being -- read, this refers to the last line scanned. Once a file has been -- completely scanned, it is the number of the last line in the file, -- and hence also gives the number of source lines in the file. -- Keyword_Casing : Casing_Type; -- Casing style used in file for keyword casing. This is initialized -- to Unknown, and then set from the first occurrence of a keyword. -- This value is used only for formatting of error messages. -- Identifier_Casing : Casing_Type; -- Casing style used in file for identifier casing. This is initialized -- to Unknown, and then set from an identifier in the program as soon as -- one is found whose casing is sufficiently clear to make a decision. -- This value is used for formatting of error messages, and also is used -- in the detection of keywords misused as identifiers. -- Instantiation : Source_Ptr; -- Source file location of the instantiation if this source file entry -- represents a generic instantiation. Set to No_Location for the case -- of a normal non-instantiation entry. See section below for details. -- This field is read-only for clients. -- Inlined_Body : Boolean; -- This can only be set True if Instantiation has a value other than -- No_Location. If true it indicates that the instantiation is actually -- an instance of an inlined body. -- Template : Source_File_Index; (read-only) -- Source file index of the source file containing the template if this -- is a generic instantiation. Set to No_Source_File for the normal case -- of a non-instantiation entry. See Sinput-L for details. -- Unit : Unit_Number_Type; -- Identifies the unit contained in this source file. Set by -- Initialize_Scanner, must not be subsequently altered. -- The source file table is accessed by clients using the following -- subprogram interface: subtype SFI is Source_File_Index; System_Source_File_Index : SFI; -- The file system.ads is always read by the compiler to determine the -- settings of the target parameters in the private part of System. This -- variable records the source file index of system.ads. Typically this -- will be 1 since system.ads is read first. function Debug_Source_Name (S : SFI) return File_Name_Type; function File_Name (S : SFI) return File_Name_Type; function File_Type (S : SFI) return Type_Of_File; function First_Mapped_Line (S : SFI) return Logical_Line_Number; function Full_Debug_Name (S : SFI) return File_Name_Type; function Full_File_Name (S : SFI) return File_Name_Type; function Full_Ref_Name (S : SFI) return File_Name_Type; function Identifier_Casing (S : SFI) return Casing_Type; function Inlined_Body (S : SFI) return Boolean; function Instantiation (S : SFI) return Source_Ptr; function Keyword_Casing (S : SFI) return Casing_Type; function Last_Source_Line (S : SFI) return Physical_Line_Number; function License (S : SFI) return License_Type; function Num_SRef_Pragmas (S : SFI) return Nat; function Reference_Name (S : SFI) return File_Name_Type; function Source_Checksum (S : SFI) return Word; function Source_First (S : SFI) return Source_Ptr; function Source_Last (S : SFI) return Source_Ptr; function Source_Text (S : SFI) return Source_Buffer_Ptr; function Template (S : SFI) return Source_File_Index; function Unit (S : SFI) return Unit_Number_Type; function Time_Stamp (S : SFI) return Time_Stamp_Type; procedure Set_Keyword_Casing (S : SFI; C : Casing_Type); procedure Set_Identifier_Casing (S : SFI; C : Casing_Type); procedure Set_License (S : SFI; L : License_Type); procedure Set_Unit (S : SFI; U : Unit_Number_Type); function Last_Source_File return Source_File_Index; -- Index of last source file table entry function Num_Source_Files return Nat; -- Number of source file table entries procedure Initialize; -- Initialize internal tables procedure Lock; -- Lock internal tables procedure Unlock; -- Unlock internal tables Main_Source_File : Source_File_Index := No_Source_File; -- This is set to the source file index of the main unit ----------------------------- -- Source_File_Index_Table -- ----------------------------- -- The Get_Source_File_Index function is called very frequently. Earlier -- versions cached a single entry, but then reverted to a serial search, -- and this proved to be a significant source of inefficiency. To get -- around this, we use the following directly indexed array. The space -- of possible input values is a value of type Source_Ptr which is simply -- an Int value. The values in this space are allocated sequentially as -- new units are loaded. -- The following table has an entry for each 4K range of possible -- Source_Ptr values. The value in the table is the lowest value -- Source_File_Index whose Source_Ptr range contains value in the -- range. -- For example, the entry with index 4 in this table represents Source_Ptr -- values in the range 4*4096 .. 5*4096-1. The Source_File_Index value -- stored would be the lowest numbered source file with at least one byte -- in this range. -- The algorithm used in Get_Source_File_Index is simply to access this -- table and then do a serial search starting at the given position. This -- will almost always terminate with one or two checks. -- Note that this array is pretty large, but in most operating systems -- it will not be allocated in physical memory unless it is actually used. Chunk_Power : constant := 12; Chunk_Size : constant := 2 ** Chunk_Power; -- Change comments above if value changed. Note that Chunk_Size must -- be a power of 2 (to allow for efficient access to the table). Source_File_Index_Table : array (Int range 0 .. Int'Last / Chunk_Size) of Source_File_Index; procedure Set_Source_File_Index_Table (Xnew : Source_File_Index); -- Sets entries in the Source_File_Index_Table for the newly created -- Source_File table entry whose index is Xnew. The Source_First and -- Source_Last fields of this entry must be set before the call. ----------------------- -- Checksum Handling -- ----------------------- -- As a source file is scanned, a checksum is computed by taking all the -- non-blank characters in the file, excluding comment characters, the -- minus-minus sequence starting a comment, and all control characters -- except ESC. -- The checksum algorithm used is the standard CRC-32 algorithm, as -- implemented by System.CRC32, except that we do not bother with the -- final XOR with all 1 bits. -- This algorithm ensures that the checksum includes all semantically -- significant aspects of the program represented by the source file, -- but is insensitive to layout, presence or contents of comments, wide -- character representation method, or casing conventions outside strings. -- Scans.Checksum is initialized appropriately at the start of scanning -- a file, and copied into the Source_Checksum field of the file table -- entry when the end of file is encountered. ------------------------------------- -- Handling Generic Instantiations -- ------------------------------------- -- As described in Sem_Ch12, a generic instantiation involves making a -- copy of the tree of the generic template. The source locations in -- this tree directly reference the source of the template. However it -- is also possible to find the location of the instantiation. -- This is achieved as follows. When an instantiation occurs, a new entry -- is made in the source file table. This entry points to the same source -- text, i.e. the file that contains the instantiation, but has a distinct -- set of Source_Ptr index values. The separate range of Sloc values avoids -- confusion, and means that the Sloc values can still be used to uniquely -- identify the source file table entry. It is possible for both entries -- to point to the same text, because of the virtual origin pointers used -- in the source table. -- The Instantiation field of this source file index entry, usually set -- to No_Source_File, instead contains the Sloc of the instantiation. In -- the case of nested instantiations, this Sloc may itself refer to an -- instantiation, so the complete chain can be traced. -- Two routines are used to build these special entries in the source -- file table. Create_Instantiation_Source is first called to build -- the virtual source table entry for the instantiation, and then the -- Sloc values in the copy are adjusted using Adjust_Instantiation_Sloc. -- See child unit Sinput.L for details on these two routines. ----------------- -- Global Data -- ----------------- Current_Source_File : Source_File_Index := No_Source_File; -- Source_File table index of source file currently being scanned. -- Initialized so that some tools (such as gprbuild) can be built with -- -gnatVa and pragma Initialized_Scalars without problems. Current_Source_Unit : Unit_Number_Type; -- Unit number of source file currently being scanned. The special value -- of No_Unit indicates that the configuration pragma file is currently -- being scanned (this has no entry in the unit table). Source_gnat_adc : Source_File_Index := No_Source_File; -- This is set if a gnat.adc file is present to reference this file Source : Source_Buffer_Ptr; -- Current source (copy of Source_File.Table (Current_Source_Unit).Source) Internal_Source : aliased Source_Buffer (1 .. 81); -- This buffer is used internally in the compiler when the lexical analyzer -- is used to scan a string from within the compiler. The procedure is to -- establish Internal_Source_Ptr as the value of Source, set the string to -- be scanned, appropriately terminated, in this buffer, and set Scan_Ptr -- to point to the start of the buffer. It is a fatal error if the scanner -- signals an error while scanning a token in this internal buffer. Internal_Source_Ptr : constant Source_Buffer_Ptr := Internal_Source'Unrestricted_Access; -- Pointer to internal source buffer ----------------- -- Subprograms -- ----------------- procedure Backup_Line (P : in out Source_Ptr); -- Back up the argument pointer to the start of the previous line. On -- entry, P points to the start of a physical line in the source buffer. -- On return, P is updated to point to the start of the previous line. -- The caller has checked that a Line_Terminator character precedes P so -- that there definitely is a previous line in the source buffer. procedure Build_Location_String (Loc : Source_Ptr); -- This function builds a string literal of the form "name:line", where -- name is the file name corresponding to Loc, and line is the line number. -- In the event that instantiations are involved, additional suffixes of -- the same form are appended after the separating string " instantiated at -- ". The returned string is appended to the Name_Buffer, terminated by -- ASCII.NUL, with Name_Length indicating the length not including the -- terminating Nul. function Get_Column_Number (P : Source_Ptr) return Column_Number; -- The ones-origin column number of the specified Source_Ptr value is -- determined and returned. Tab characters if present are assumed to -- represent the standard 1,9,17.. spacing pattern. function Get_Logical_Line_Number (P : Source_Ptr) return Logical_Line_Number; -- The line number of the specified source position is obtained by -- doing a binary search on the source positions in the lines table -- for the unit containing the given source position. The returned -- value is the logical line number, already adjusted for the effect -- of source reference pragmas. If P refers to the line of a source -- reference pragma itself, then No_Line is returned. If no source -- reference pragmas have been encountered, the value returned is -- the same as the physical line number. function Get_Physical_Line_Number (P : Source_Ptr) return Physical_Line_Number; -- The line number of the specified source position is obtained by -- doing a binary search on the source positions in the lines table -- for the unit containing the given source position. The returned -- value is the physical line number in the source being compiled. function Get_Source_File_Index (S : Source_Ptr) return Source_File_Index; -- Return file table index of file identified by given source pointer -- value. This call must always succeed, since any valid source pointer -- value belongs to some previously loaded source file. function Instantiation_Depth (S : Source_Ptr) return Nat; -- Determine instantiation depth for given Sloc value. A value of -- zero means that the given Sloc is not in an instantiation. function Line_Start (P : Source_Ptr) return Source_Ptr; -- Finds the source position of the start of the line containing the -- given source location. function Line_Start (L : Physical_Line_Number; S : Source_File_Index) return Source_Ptr; -- Finds the source position of the start of the given line in the -- given source file, using a physical line number to identify the line. function Num_Source_Lines (S : Source_File_Index) return Nat; -- Returns the number of source lines (this is equivalent to reading -- the value of Last_Source_Line, but returns Nat rather than a -- physical line number. procedure Register_Source_Ref_Pragma (File_Name : File_Name_Type; Stripped_File_Name : File_Name_Type; Mapped_Line : Nat; Line_After_Pragma : Physical_Line_Number); -- Register a source reference pragma, the parameter File_Name is the -- file name from the pragma, and Stripped_File_Name is this name with -- the directory information stripped. Both these parameters are set -- to No_Name if no file name parameter was given in the pragma. -- (which can only happen for the second and subsequent pragmas). -- Mapped_Line is the line number parameter from the pragma, and -- Line_After_Pragma is the physical line number of the line that -- follows the line containing the Source_Reference pragma. function Original_Location (S : Source_Ptr) return Source_Ptr; -- Given a source pointer S, returns the corresponding source pointer -- value ignoring instantiation copies. For locations that do not -- correspond to instantiation copies of templates, the argument is -- returned unchanged. For locations that do correspond to copies of -- templates from instantiations, the location within the original -- template is returned. This is useful in canonicalizing locations. function Instantiation_Location (S : Source_Ptr) return Source_Ptr; pragma Inline (Instantiation_Location); -- Given a source pointer S, returns the corresponding source pointer -- value of the instantiation if this location is within an instance. -- If S is not within an instance, then this returns No_Location. function Top_Level_Location (S : Source_Ptr) return Source_Ptr; -- Given a source pointer S, returns the argument unchanged if it is -- not in an instantiation. If S is in an instantiation, then it returns -- the location of the top level instantiation, i.e. the outer level -- instantiation in the nested case. function Physical_To_Logical (Line : Physical_Line_Number; S : Source_File_Index) return Logical_Line_Number; -- Given a physical line number in source file whose source index is S, -- return the corresponding logical line number. If the physical line -- number is one containing a Source_Reference pragma, the result will -- be No_Line_Number. procedure Skip_Line_Terminators (P : in out Source_Ptr; Physical : out Boolean); -- On entry, P points to a line terminator that has been encountered, -- which is one of FF,LF,VT,CR or a wide character sequence whose value is -- in category Separator,Line or Separator,Paragraph. P points just past -- the character that was scanned. The purpose of this routine is to -- distinguish physical and logical line endings. A physical line ending -- is one of: -- -- CR on its own (MAC System 7) -- LF on its own (Unix and unix-like systems) -- CR/LF (DOS, Windows) -- Wide character in Separator,Line or Separator,Paragraph category -- -- Note: we no longer recognize LF/CR (which we did in some earlier -- versions of GNAT. The reason for this is that this sequence is not -- used and recognizing it generated confusion. For example given the -- sequence LF/CR/LF we were interpreting that as (LF/CR) ending the -- first line and a blank line ending with CR following, but it is -- clearly better to interpret this as LF, with a blank line terminated -- by CR/LF, given that LF and CR/LF are both in common use, but no -- system we know of uses LF/CR. -- -- A logical line ending (that is not a physical line ending) is one of: -- -- VT on its own -- FF on its own -- -- On return, P is bumped past the line ending sequence (one of the above -- seven possibilities). Physical is set to True to indicate that a -- physical end of line was encountered, in which case this routine also -- makes sure that the lines table for the current source file has an -- appropriate entry for the start of the new physical line. procedure Sloc_Range (N : Node_Id; Min, Max : out Source_Ptr); -- Given a node, returns the minimum and maximum source locations of any -- node in the syntactic subtree for the node. This is not quite the same -- as the locations of the first and last token in the node construct -- because parentheses at the outer level do not have a recorded Sloc. -- -- Note: if the tree for the expression contains no "real" Sloc values, -- i.e. values > No_Location, then both Min and Max are set to Sloc (Expr). function Source_Offset (S : Source_Ptr) return Nat; -- Returns the zero-origin offset of the given source location from the -- start of its corresponding unit. This is used for creating canonical -- names in some situations. procedure Write_Location (P : Source_Ptr); -- Writes out a string of the form fff:nn:cc, where fff, nn, cc are the -- file name, line number and column corresponding to the given source -- location. No_Location and Standard_Location appear as the strings -- <no location> and <standard location>. If the location is within an -- instantiation, then the instance location is appended, enclosed in -- square brackets (which can nest if necessary). Note that this routine -- is used only for internal compiler debugging output purposes (which -- is why the somewhat cryptic use of brackets is acceptable). procedure wl (P : Source_Ptr); pragma Export (Ada, wl); -- Equivalent to Write_Location (P); Write_Eol; for calls from GDB procedure Write_Time_Stamp (S : Source_File_Index); -- Writes time stamp of specified file in YY-MM-DD HH:MM.SS format procedure Tree_Read; -- Initializes internal tables from current tree file using the relevant -- Table.Tree_Read routines. procedure Tree_Write; -- Writes out internal tables to current tree file using the relevant -- Table.Tree_Write routines. private pragma Inline (File_Name); pragma Inline (First_Mapped_Line); pragma Inline (Full_File_Name); pragma Inline (Identifier_Casing); pragma Inline (Instantiation); pragma Inline (Keyword_Casing); pragma Inline (Last_Source_Line); pragma Inline (Last_Source_File); pragma Inline (License); pragma Inline (Num_SRef_Pragmas); pragma Inline (Num_Source_Files); pragma Inline (Num_Source_Lines); pragma Inline (Reference_Name); pragma Inline (Set_Keyword_Casing); pragma Inline (Set_Identifier_Casing); pragma Inline (Source_First); pragma Inline (Source_Last); pragma Inline (Source_Text); pragma Inline (Template); pragma Inline (Time_Stamp); ------------------------- -- Source_Lines Tables -- ------------------------- type Lines_Table_Type is array (Physical_Line_Number) of Source_Ptr; -- Type used for lines table. The entries are indexed by physical line -- numbers. The values are the starting Source_Ptr values for the start -- of the corresponding physical line. Note that we make this a bogus -- big array, sized as required, so that we avoid the use of fat pointers. type Lines_Table_Ptr is access all Lines_Table_Type; -- Type used for pointers to line tables type Logical_Lines_Table_Type is array (Physical_Line_Number) of Logical_Line_Number; -- Type used for logical lines table. This table is used if a source -- reference pragma is present. It is indexed by physical line numbers, -- and contains the corresponding logical line numbers. An entry that -- corresponds to a source reference pragma is set to No_Line_Number. -- Note that we make this a bogus big array, sized as required, so that -- we avoid the use of fat pointers. type Logical_Lines_Table_Ptr is access all Logical_Lines_Table_Type; -- Type used for pointers to logical line tables ----------------------- -- Source_File Table -- ----------------------- -- See earlier descriptions for meanings of public fields type Source_File_Record is record File_Name : File_Name_Type; Reference_Name : File_Name_Type; Debug_Source_Name : File_Name_Type; Full_Debug_Name : File_Name_Type; Full_File_Name : File_Name_Type; Full_Ref_Name : File_Name_Type; Num_SRef_Pragmas : Nat; First_Mapped_Line : Logical_Line_Number; Source_Text : Source_Buffer_Ptr; Source_First : Source_Ptr; Source_Last : Source_Ptr; Source_Checksum : Word; Last_Source_Line : Physical_Line_Number; Instantiation : Source_Ptr; Template : Source_File_Index; Unit : Unit_Number_Type; Time_Stamp : Time_Stamp_Type; File_Type : Type_Of_File; Inlined_Body : Boolean; License : License_Type; Keyword_Casing : Casing_Type; Identifier_Casing : Casing_Type; -- The following fields are for internal use only (i.e. only in the -- body of Sinput or its children, with no direct access by clients). Sloc_Adjust : Source_Ptr; -- A value to be added to Sloc values for this file to reference the -- corresponding lines table. This is zero for the non-instantiation -- case, and set so that the addition references the ultimate template -- for the instantiation case. See Sinput-L for further details. Lines_Table : Lines_Table_Ptr; -- Pointer to lines table for this source. Updated as additional -- lines are accessed using the Skip_Line_Terminators procedure. -- Note: the lines table for an instantiation entry refers to the -- original line numbers of the template see Sinput-L for details. Logical_Lines_Table : Logical_Lines_Table_Ptr; -- Pointer to logical lines table for this source. Non-null only if -- a source reference pragma has been processed. Updated as lines -- are accessed using the Skip_Line_Terminators procedure. Lines_Table_Max : Physical_Line_Number; -- Maximum subscript values for currently allocated Lines_Table -- and (if present) the allocated Logical_Lines_Table. The value -- Max_Source_Line gives the maximum used value, this gives the -- maximum allocated value. end record; -- The following representation clause ensures that the above record -- has no holes. We do this so that when instances of this record are -- written by Tree_Gen, we do not write uninitialized values to the file. AS : constant Pos := Standard'Address_Size; for Source_File_Record use record File_Name at 0 range 0 .. 31; Reference_Name at 4 range 0 .. 31; Debug_Source_Name at 8 range 0 .. 31; Full_Debug_Name at 12 range 0 .. 31; Full_File_Name at 16 range 0 .. 31; Full_Ref_Name at 20 range 0 .. 31; Num_SRef_Pragmas at 24 range 0 .. 31; First_Mapped_Line at 28 range 0 .. 31; Source_First at 32 range 0 .. 31; Source_Last at 36 range 0 .. 31; Source_Checksum at 40 range 0 .. 31; Last_Source_Line at 44 range 0 .. 31; Instantiation at 48 range 0 .. 31; Template at 52 range 0 .. 31; Unit at 56 range 0 .. 31; Time_Stamp at 60 range 0 .. 8 * Time_Stamp_Length - 1; File_Type at 74 range 0 .. 7; Inlined_Body at 75 range 0 .. 7; License at 76 range 0 .. 7; Keyword_Casing at 77 range 0 .. 7; Identifier_Casing at 78 range 0 .. 15; Sloc_Adjust at 80 range 0 .. 31; Lines_Table_Max at 84 range 0 .. 31; -- The following fields are pointers, so we have to specialize their -- lengths using pointer size, obtained above as Standard'Address_Size. Source_Text at 88 range 0 .. AS - 1; Lines_Table at 88 range AS .. AS * 2 - 1; Logical_Lines_Table at 88 range AS * 2 .. AS * 3 - 1; end record; for Source_File_Record'Size use 88 * 8 + AS * 3; -- This ensures that we did not leave out any fields package Source_File is new Table.Table ( Table_Component_Type => Source_File_Record, Table_Index_Type => Source_File_Index, Table_Low_Bound => 1, Table_Initial => Alloc.Source_File_Initial, Table_Increment => Alloc.Source_File_Increment, Table_Name => "Source_File"); ----------------- -- Subprograms -- ----------------- procedure Alloc_Line_Tables (S : in out Source_File_Record; New_Max : Nat); -- Allocate or reallocate the lines table for the given source file so -- that it can accommodate at least New_Max lines. Also allocates or -- reallocates logical lines table if source ref pragmas are present. procedure Add_Line_Tables_Entry (S : in out Source_File_Record; P : Source_Ptr); -- Increment line table size by one (reallocating the lines table if -- needed) and set the new entry to contain the value P. Also bumps -- the Source_Line_Count field. If source reference pragmas are -- present, also increments logical lines table size by one, and -- sets new entry. procedure Trim_Lines_Table (S : Source_File_Index); -- Set lines table size for entry S in the source file table to -- correspond to the current value of Num_Source_Lines, releasing -- any unused storage. This is used by Sinput.L and Sinput.D. end Sinput;
Go to most recent revision | Compare with Previous | Blame | View Log