URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [config/] [arm/] [arm-generic.md] - Rev 298
Go to most recent revision | Compare with Previous | Blame | View Log
;; Generic ARM Pipeline Description
;; Copyright (C) 2003, 2007 Free Software Foundation, Inc.
;;
;; This file is part of GCC.
;;
;; GCC is free software; you can redistribute it and/or modify it
;; under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;;
;; GCC is distributed in the hope that it will be useful, but
;; WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
;; General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; <http://www.gnu.org/licenses/>. */
(define_automaton "arm")
;; Write buffer
;
; Strictly, we should model a 4-deep write buffer for ARM7xx based chips
;
; The write buffer on some of the arm6 processors is hard to model exactly.
; There is room in the buffer for up to two addresses and up to eight words
; of memory, but the two needn't be split evenly. When writing the two
; addresses are fully pipelined. However, a read from memory that is not
; currently in the cache will block until the writes have completed.
; It is normally the case that FCLK and MCLK will be in the ratio 2:1, so
; writes will take 2 FCLK cycles per word, if FCLK and MCLK are asynchronous
; (they aren't allowed to be at present) then there is a startup cost of 1MCLK
; cycle to add as well.
(define_cpu_unit "write_buf" "arm")
;; Write blockage unit
;
; The write_blockage unit models (partially), the fact that reads will stall
; until the write buffer empties.
; The f_mem_r and r_mem_f could also block, but they are to the stack,
; so we don't model them here
(define_cpu_unit "write_blockage" "arm")
;; Core
;
(define_cpu_unit "core" "arm")
(define_insn_reservation "r_mem_f_wbuf" 5
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "model_wbuf" "yes")
(eq_attr "type" "r_mem_f")))
"core+write_buf*3")
(define_insn_reservation "store_wbuf" 5
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "model_wbuf" "yes")
(eq_attr "type" "store1")))
"core+write_buf*3+write_blockage*5")
(define_insn_reservation "store2_wbuf" 7
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "model_wbuf" "yes")
(eq_attr "type" "store2")))
"core+write_buf*4+write_blockage*7")
(define_insn_reservation "store3_wbuf" 9
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "model_wbuf" "yes")
(eq_attr "type" "store3")))
"core+write_buf*5+write_blockage*9")
(define_insn_reservation "store4_wbuf" 11
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "model_wbuf" "yes")
(eq_attr "type" "store4")))
"core+write_buf*6+write_blockage*11")
(define_insn_reservation "store2" 3
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "model_wbuf" "no")
(eq_attr "type" "store2")))
"core*3")
(define_insn_reservation "store3" 4
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "model_wbuf" "no")
(eq_attr "type" "store3")))
"core*4")
(define_insn_reservation "store4" 5
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "model_wbuf" "no")
(eq_attr "type" "store4")))
"core*5")
(define_insn_reservation "store_ldsched" 1
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "ldsched" "yes")
(eq_attr "type" "store1")))
"core")
(define_insn_reservation "load_ldsched_xscale" 3
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "ldsched" "yes")
(and (eq_attr "type" "load_byte,load1")
(eq_attr "is_xscale" "yes"))))
"core")
(define_insn_reservation "load_ldsched" 2
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "ldsched" "yes")
(and (eq_attr "type" "load_byte,load1")
(eq_attr "is_xscale" "no"))))
"core")
(define_insn_reservation "load_or_store" 2
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "ldsched" "!yes")
(eq_attr "type" "load_byte,load1,load2,load3,load4,store1")))
"core*2")
(define_insn_reservation "mult" 16
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "ldsched" "no") (eq_attr "type" "mult")))
"core*16")
(define_insn_reservation "mult_ldsched_strongarm" 3
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "ldsched" "yes")
(and (eq_attr "is_strongarm" "yes")
(eq_attr "type" "mult"))))
"core*2")
(define_insn_reservation "mult_ldsched" 4
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "ldsched" "yes")
(and (eq_attr "is_strongarm" "no")
(eq_attr "type" "mult"))))
"core*4")
(define_insn_reservation "multi_cycle" 32
(and (eq_attr "generic_sched" "yes")
(and (eq_attr "core_cycles" "multi")
(eq_attr "type" "!mult,load_byte,load1,load2,load3,load4,store1,store2,store3,store4")))
"core*32")
(define_insn_reservation "single_cycle" 1
(and (eq_attr "generic_sched" "yes")
(eq_attr "core_cycles" "single"))
"core")
Go to most recent revision | Compare with Previous | Blame | View Log