URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [config/] [ia64/] [ia64.opt] - Rev 312
Go to most recent revision | Compare with Previous | Blame | View Log
; Copyright (C) 2005, 2006, 2008 Free Software Foundation, Inc.
;
; This file is part of GCC.
;
; GCC is free software; you can redistribute it and/or modify it under
; the terms of the GNU General Public License as published by the Free
; Software Foundation; either version 3, or (at your option) any later
; version.
;
; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
; WARRANTY; without even the implied warranty of MERCHANTABILITY or
; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
; for more details.
;
; You should have received a copy of the GNU General Public License
; along with GCC; see the file COPYING3. If not see
; <http://www.gnu.org/licenses/>.
mbig-endian
Target Report RejectNegative Mask(BIG_ENDIAN)
Generate big endian code
mlittle-endian
Target Report RejectNegative InverseMask(BIG_ENDIAN)
Generate little endian code
mgnu-as
Target Report Mask(GNU_AS)
Generate code for GNU as
mgnu-ld
Target Report Mask(GNU_LD)
Generate code for GNU ld
mvolatile-asm-stop
Target Report Mask(VOL_ASM_STOP)
Emit stop bits before and after volatile extended asms
mregister-names
Target Mask(REG_NAMES)
Use in/loc/out register names
mno-sdata
Target Report RejectNegative Mask(NO_SDATA)
msdata
Target Report RejectNegative InverseMask(NO_SDATA)
Enable use of sdata/scommon/sbss
mno-pic
Target Report RejectNegative Mask(NO_PIC)
Generate code without GP reg
mconstant-gp
Target Report RejectNegative Mask(CONST_GP)
gp is constant (but save/restore gp on indirect calls)
mauto-pic
Target Report RejectNegative Mask(AUTO_PIC)
Generate self-relocatable code
minline-float-divide-min-latency
Target Report RejectNegative Var(TARGET_INLINE_FLOAT_DIV, 1)
Generate inline floating point division, optimize for latency
minline-float-divide-max-throughput
Target Report RejectNegative Var(TARGET_INLINE_FLOAT_DIV, 2) Init(2)
Generate inline floating point division, optimize for throughput
mno-inline-float-divide
Target Report RejectNegative Var(TARGET_INLINE_FLOAT_DIV, 0)
minline-int-divide-min-latency
Target Report RejectNegative Var(TARGET_INLINE_INT_DIV, 1)
Generate inline integer division, optimize for latency
minline-int-divide-max-throughput
Target Report RejectNegative Var(TARGET_INLINE_INT_DIV, 2)
Generate inline integer division, optimize for throughput
mno-inline-int-divide
Target Report RejectNegative Var(TARGET_INLINE_INT_DIV, 0)
Do not inline integer division
minline-sqrt-min-latency
Target Report RejectNegative Var(TARGET_INLINE_SQRT, 1)
Generate inline square root, optimize for latency
minline-sqrt-max-throughput
Target Report RejectNegative Var(TARGET_INLINE_SQRT, 2)
Generate inline square root, optimize for throughput
mno-inline-sqrt
Target Report RejectNegative Var(TARGET_INLINE_SQRT, 0)
Do not inline square root
mdwarf2-asm
Target Report Mask(DWARF2_ASM)
Enable Dwarf 2 line debug info via GNU as
mearly-stop-bits
Target Report Mask(EARLY_STOP_BITS)
Enable earlier placing stop bits for better scheduling
mfixed-range=
Target RejectNegative Joined
Specify range of registers to make fixed
mtls-size=
Target RejectNegative Joined UInteger Var(ia64_tls_size) Init(22)
Specify bit size of immediate TLS offsets
mtune=
Target RejectNegative Joined
Schedule code for given CPU
msched-br-data-spec
Target Report Var(mflag_sched_br_data_spec) Init(0)
Use data speculation before reload
msched-ar-data-spec
Target Report Var(mflag_sched_ar_data_spec) Init(1)
Use data speculation after reload
msched-control-spec
Target Report Var(mflag_sched_control_spec) Init(2)
Use control speculation
msched-br-in-data-spec
Target Report Var(mflag_sched_br_in_data_spec) Init(1)
Use in block data speculation before reload
msched-ar-in-data-spec
Target Report Var(mflag_sched_ar_in_data_spec) Init(1)
Use in block data speculation after reload
msched-in-control-spec
Target Report Var(mflag_sched_in_control_spec) Init(1)
Use in block control speculation
msched-spec-ldc
Target Report Var(mflag_sched_spec_ldc) Init(1)
Use simple data speculation check
msched-spec-control-ldc
Target Report Var(mflag_sched_spec_control_ldc) Init(0)
Use simple data speculation check for control speculation
msched-prefer-non-data-spec-insns
Target Report Var(mflag_sched_prefer_non_data_spec_insns) Init(0)
If set, data speculative instructions will be chosen for schedule only if there are no other choices at the moment
msched-prefer-non-control-spec-insns
Target Report Var(mflag_sched_prefer_non_control_spec_insns) Init(0)
If set, control speculative instructions will be chosen for schedule only if there are no other choices at the moment
msched-count-spec-in-critical-path
Target Report Var(mflag_sched_count_spec_in_critical_path) Init(0)
Count speculative dependencies while calculating priority of instructions
msched-stop-bits-after-every-cycle
Target Report Var(mflag_sched_stop_bits_after_every_cycle) Init(1)
Place a stop bit after every cycle when scheduling
msched-fp-mem-deps-zero-cost
Target Report Var(mflag_sched_fp_mem_deps_zero_cost) Init(0)
Assume that floating-point stores and loads are not likely to cause conflict when placed into one instruction group
msched-max-memory-insns=
Target RejectNegative Joined UInteger Var(ia64_max_memory_insns) Init(1)
Soft limit on number of memory insns per instruction group, giving lower priority to subsequent memory insns attempting to schedule in the same insn group. Frequently useful to prevent cache bank conflicts. Default value is 1
msched-max-memory-insns-hard-limit
Target Report Var(mflag_sched_mem_insns_hard_limit) Init(0)
Disallow more than `msched-max-memory-insns' in instruction group. Otherwise, limit is `soft' (prefer non-memory operations when limit is reached)
msel-sched-dont-check-control-spec
Target Report Var(mflag_sel_sched_dont_check_control_spec) Init(0)
Don't generate checks for control speculation in selective scheduling
mfused-madd
Target Report Mask(FUSED_MADD)
Enable fused multiply/add and multiply/subtract instructions
; This comment is to ensure we retain the blank line above.
Go to most recent revision | Compare with Previous | Blame | View Log