URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [config/] [m68k/] [predicates.md] - Rev 315
Go to most recent revision | Compare with Previous | Blame | View Log
;; Predicate definitions for Motorola 68000.
;; Copyright (C) 2005, 2007 Free Software Foundation, Inc.
;;
;; This file is part of GCC.
;;
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;;
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; <http://www.gnu.org/licenses/>.
;; Special case of a general operand that's used as a source
;; operand. Use this to permit reads from PC-relative memory when
;; -mpcrel is specified.
(define_predicate "general_src_operand"
(match_code "const_int,const_double,const,symbol_ref,label_ref,subreg,reg,mem")
{
if (TARGET_PCREL
&& GET_CODE (op) == MEM
&& (GET_CODE (XEXP (op, 0)) == SYMBOL_REF
|| GET_CODE (XEXP (op, 0)) == LABEL_REF
|| GET_CODE (XEXP (op, 0)) == CONST))
return 1;
return general_operand (op, mode);
})
;; Special case of a nonimmediate operand that's used as a source. Use
;; this to permit reads from PC-relative memory when -mpcrel is
;; specified.
(define_predicate "nonimmediate_src_operand"
(match_code "subreg,reg,mem")
{
if (TARGET_PCREL && GET_CODE (op) == MEM
&& (GET_CODE (XEXP (op, 0)) == SYMBOL_REF
|| GET_CODE (XEXP (op, 0)) == LABEL_REF
|| GET_CODE (XEXP (op, 0)) == CONST))
return 1;
return nonimmediate_operand (op, mode);
})
;; Special case of a memory operand that's used as a source. Use this
;; to permit reads from PC-relative memory when -mpcrel is specified.
(define_predicate "memory_src_operand"
(match_code "subreg,mem")
{
if (TARGET_PCREL && GET_CODE (op) == MEM
&& (GET_CODE (XEXP (op, 0)) == SYMBOL_REF
|| GET_CODE (XEXP (op, 0)) == LABEL_REF
|| GET_CODE (XEXP (op, 0)) == CONST))
return 1;
return memory_operand (op, mode);
})
;; Similar to general_operand, but exclude stack_pointer_rtx.
(define_predicate "not_sp_operand"
(match_code "subreg,reg,mem")
{
return op != stack_pointer_rtx && nonimmediate_operand (op, mode);
})
;; Predicate that accepts only a pc-relative address. This is needed
;; because pc-relative addresses don't satisfy the predicate
;; "general_src_operand".
(define_predicate "pcrel_address"
(match_code "symbol_ref,label_ref,const"))
;; Accept integer operands in the range 0..0xffffffff. We have to
;; check the range carefully since this predicate is used in DImode
;; contexts. Also, we need some extra crud to make it work when
;; hosted on 64-bit machines.
(define_predicate "const_uint32_operand"
(match_code "const_int,const_double")
{
/* It doesn't make sense to ask this question with a mode that is
not larger than 32 bits. */
gcc_assert (GET_MODE_BITSIZE (mode) > 32);
#if HOST_BITS_PER_WIDE_INT > 32
/* All allowed constants will fit a CONST_INT. */
return (GET_CODE (op) == CONST_INT
&& (INTVAL (op) >= 0 && INTVAL (op) <= 0xffffffffL));
#else
return (GET_CODE (op) == CONST_INT
|| (GET_CODE (op) == CONST_DOUBLE && CONST_DOUBLE_HIGH (op) == 0));
#endif
})
;; Accept integer operands in the range -0x80000000..0x7fffffff. We
;; have to check the range carefully since this predicate is used in
;; DImode contexts.
(define_predicate "const_sint32_operand"
(match_code "const_int")
{
/* It doesn't make sense to ask this question with a mode that is
not larger than 32 bits. */
gcc_assert (GET_MODE_BITSIZE (mode) > 32);
/* All allowed constants will fit a CONST_INT. */
return (GET_CODE (op) == CONST_INT
&& (INTVAL (op) >= (-0x7fffffff - 1) && INTVAL (op) <= 0x7fffffff));
})
;; Return true if X is a valid comparison operator for the dbcc
;; instruction. Note it rejects floating point comparison
;; operators. (In the future we could use Fdbcc). It also rejects
;; some comparisons when CC_NO_OVERFLOW is set.
(define_predicate "valid_dbcc_comparison_p"
(and (match_code "eq,ne,gtu,ltu,geu,leu,gt,lt,ge,le")
(match_test "valid_dbcc_comparison_p_2 (op, mode)")))
(define_predicate "m68k_cstore_comparison_operator"
(if_then_else (match_test "TARGET_68881")
(match_operand 0 "comparison_operator")
(match_operand 0 "ordered_comparison_operator")))
;; Check for sign_extend or zero_extend. Used for bit-count operands.
(define_predicate "extend_operator"
(match_code "sign_extend,zero_extend"))
;; Returns true if OP is either a symbol reference or a sum of a
;; symbol reference and a constant. This predicate is for "raw"
;; symbol references not yet processed by legitimize*_address,
;; hence we do not handle UNSPEC_{XGOT, TLS, XTLS} here.
(define_predicate "symbolic_operand"
(match_code "symbol_ref,label_ref,const")
{
switch (GET_CODE (op))
{
case SYMBOL_REF:
case LABEL_REF:
return true;
case CONST:
op = XEXP (op, 0);
return ((GET_CODE (XEXP (op, 0)) == SYMBOL_REF
|| GET_CODE (XEXP (op, 0)) == LABEL_REF)
&& GET_CODE (XEXP (op, 1)) == CONST_INT);
#if 0 /* Deleted, with corresponding change in m68k.h,
so as to fit the specs. No CONST_DOUBLE is ever symbolic. */
case CONST_DOUBLE:
return GET_MODE (op) == mode;
#endif
default:
return false;
}
})
;; A constant that can be used the address in a call insn
(define_predicate "const_call_operand"
(ior (match_operand 0 "const_int_operand")
(and (match_test "m68k_symbolic_call != NULL")
(match_operand 0 "symbolic_operand"))))
;; An operand that can be used as the address in a call insn.
(define_predicate "call_operand"
(ior (match_operand 0 "const_call_operand")
(match_operand 0 "register_operand")))
;; A constant that can be used the address in a sibcall insn
(define_predicate "const_sibcall_operand"
(ior (match_operand 0 "const_int_operand")
(and (match_test "m68k_symbolic_jump != NULL")
(match_operand 0 "symbolic_operand"))))
;; An operand that can be used as the address in a sibcall insn.
(define_predicate "sibcall_operand"
(ior (match_operand 0 "const_sibcall_operand")
(and (match_code "reg")
(match_test "REGNO (op) == STATIC_CHAIN_REGNUM"))))
;; TODO: Add a comment here.
(define_predicate "post_inc_operand"
(and (match_code "mem")
(match_test "GET_CODE (XEXP (op, 0)) == POST_INC")))
;; TODO: Add a comment here.
(define_predicate "pre_dec_operand"
(and (match_code "mem")
(match_test "GET_CODE (XEXP (op, 0)) == PRE_DEC")))
;; A zero constant.
(define_predicate "const0_operand"
(and (match_code "const_int,const_double,const_vector")
(match_test "op == CONST0_RTX (mode)")))
;; A one constant (operand for conditional_trap).
(define_predicate "const1_operand"
(and (match_code "const_int")
(match_test "op == const1_rtx")))
;; A valid operand for a HImode or QImode conditional operation.
;; ColdFire has tst patterns, but not cmp patterns.
(define_predicate "m68k_subword_comparison_operand"
(if_then_else (match_test "TARGET_COLDFIRE")
(and (match_code "const_int")
(match_test "op == const0_rtx"))
(match_operand 0 "general_src_operand")))
;; An operand for movsi_const0 pattern.
(define_predicate "movsi_const0_operand"
(and (match_operand 0 "nonimmediate_operand")
(match_test "(TARGET_68010 || TARGET_COLDFIRE)
|| !(MEM_P (op) && MEM_VOLATILE_P (op))")))
;; A non-symbolic call operand.
;; We need to special case 'const_int' to ignore its mode while matching.
(define_predicate "non_symbolic_call_operand"
(and (match_operand 0 "call_operand")
(ior (and (match_code "const_int")
(match_test "!symbolic_operand (op, mode)"))
(match_test "!symbolic_operand (op,mode)"))))
;; Special case of general_src_operand, which rejects a few fp
;; constants (which we prefer in registers) before reload.
(define_predicate "fp_src_operand"
(match_operand 0 "general_src_operand")
{
return !CONSTANT_P (op)
|| (TARGET_68881
&& (!standard_68881_constant_p (op)
|| reload_in_progress
|| reload_completed));
})
Go to most recent revision | Compare with Previous | Blame | View Log