URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [config/] [or32/] [or32.c] - Rev 309
Go to most recent revision | Compare with Previous | Blame | View Log
/* Subroutines for insn-output.c for GNU compiler. OpenRISC 1000 version. Copyright (C) 1987, 1992, 1997, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc Copyright (C) 2010 Embecosm Limited Contributed by Damjan Lampret <damjanl@bsemi.com> in 1999. Major optimizations by Matjaz Breskvar <matjazb@bsemi.com> in 2005. Updated for GCC 4.5 by Jeremy Bennett <jeremy.bennett@embecoms.com> in 2010 This file is part of GNU CC. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "rtl.h" #include "tree.h" #include "obstack.h" #include "regs.h" #include "hard-reg-set.h" #include "real.h" #include "insn-config.h" #include "conditions.h" #include "output.h" #include "insn-attr.h" #include "flags.h" #include "reload.h" #include "function.h" #include "expr.h" #include "toplev.h" #include "recog.h" #include "ggc.h" #include "except.h" #include "integrate.h" #include "tm_p.h" #include "target.h" #include "target-def.h" #include "debug.h" #include "langhooks.h" #include "df.h" #include "dwarf2.h" /* ========================================================================== */ /* Static variables (i.e. global to this file only. */ /* Save information from a "cmpxx" pattern until the branch or scc is emitted. These record the two operands of the "cmpxx" */ rtx or32_compare_op0; rtx or32_compare_op1; /*!Stack layout we use for pushing and poping saved registers */ static struct { bool save_lr_p; int lr_save_offset; bool save_fp_p; int fp_save_offset; int gpr_size; int gpr_offset; int total_size; int vars_size; int args_size; HOST_WIDE_INT mask; } frame_info; /* ========================================================================== */ /* Local (i.e. static) utility functions */ /* -------------------------------------------------------------------------- */ /*!Must the current function save a register? @param[in] regno The register to consider. @return Non-zero (TRUE) if current function must save "regno", zero (FALSE) otherwise. */ /* -------------------------------------------------------------------------- */ static bool or32_save_reg_p (int regno) { /* No need to save the faked cc0 register. */ if (regno == OR32_FLAGS_REG) return false; /* Check call-saved registers. */ if (df_regs_ever_live_p(regno) && !call_used_regs[regno]) return true; /* We need to save the old frame pointer before setting up a new one. */ if (regno == FRAME_POINTER_REGNUM && frame_pointer_needed) return true; /* We need to save the incoming return address if it is ever clobbered within the function. */ if (regno == LINK_REGNUM && df_regs_ever_live_p(regno)) return true; return false; } /* or32_save_reg_p () */ /* -------------------------------------------------------------------------- */ /*!Compute full frame size and layout. Store information in "frame_info". @param[in] size The size of the function's local variables. @return Total size of stack frame. */ /* -------------------------------------------------------------------------- */ static HOST_WIDE_INT or32_compute_frame_size (HOST_WIDE_INT size) { HOST_WIDE_INT args_size; HOST_WIDE_INT vars_size; HOST_WIDE_INT stack_offset; int regno; args_size = crtl->outgoing_args_size; vars_size = OR32_ALIGN (size, 4); frame_info.args_size = args_size; frame_info.vars_size = vars_size; /* If the function has local variables, we're committed to allocating it anyway. Otherwise reclaim it here. */ /* FIXME: Verify this. Got if from the MIPS port. */ if (vars_size == 0 && current_function_is_leaf) args_size = 0; stack_offset = args_size; /* Save link register right after possible outgoing arguments. */ if (or32_save_reg_p (LINK_REGNUM)) { frame_info.lr_save_offset = stack_offset; frame_info.save_lr_p = true; stack_offset = stack_offset + UNITS_PER_WORD; } else frame_info.save_lr_p = false; /* Save frame pointer right after possible link register. */ if (or32_save_reg_p (FRAME_POINTER_REGNUM)) { frame_info.fp_save_offset = stack_offset; frame_info.save_fp_p = true; stack_offset = stack_offset + UNITS_PER_WORD; } else frame_info.save_fp_p = false; frame_info.gpr_size = 0; frame_info.mask = 0; frame_info.gpr_offset = stack_offset; for (regno = 0; regno <= OR32_LAST_INT_REG; regno++) { if (regno == LINK_REGNUM || regno == FRAME_POINTER_REGNUM) /* These have already been saved if so needed. */ continue; if (or32_save_reg_p (regno)) { frame_info.gpr_size += UNITS_PER_WORD; frame_info.mask |= (1 << regno); } } frame_info.total_size = ((frame_info.save_fp_p ? UNITS_PER_WORD : 0) + (frame_info.save_lr_p ? UNITS_PER_WORD : 0) + args_size + frame_info.gpr_size + vars_size); return frame_info.total_size; } /* or32_compute_frame_size () */ /* -------------------------------------------------------------------------- */ /*!Emit a frame related insn. Same as emit_insn, but sets RTX_FRAME_RELATED_P to one. Getting this right will matter for DWARF 2 output, if prologues are handled via the "prologue" pattern rather than target hooks. @param[in] insn The insn to emit. @return The RTX for the emitted insn. */ /* -------------------------------------------------------------------------- */ static rtx emit_frame_insn (rtx insn) { insn = emit_insn (insn); RTX_FRAME_RELATED_P (insn) = 1; return (insn); } /* emit_frame_insn () */ /* -------------------------------------------------------------------------- */ /*!Generate the RTX for an indexed memory access Generate a RTX for the indexed memory address based on a base address and a displacement @param[in] base The base address RTX @param[in] disp The displacement @return The RTX for the generated address. */ /* -------------------------------------------------------------------------- */ static rtx indexed_memory (rtx base, HOST_WIDE_INT disp) { return gen_rtx_MEM (Pmode, gen_rtx_PLUS (Pmode, base, GEN_INT (disp))); } /* indexed_memory () */ /* -------------------------------------------------------------------------- */ /*!Generate insn patterns to do an integer compare of operands. @param[in] code RTX for the condition code. @param[in] op0 RTX for the first operand. @param[in] op1 RTX for the second operand. @return RTX for the comparison. */ /* -------------------------------------------------------------------------- */ static rtx or32_expand_int_compare (enum rtx_code code, rtx op0, rtx op1) { enum machine_mode cmpmode; rtx tmp, flags; cmpmode = SELECT_CC_MODE (code, op0, op1); flags = gen_rtx_REG (cmpmode, OR32_FLAGS_REG); /* This is very simple, but making the interface the same as in the FP case makes the rest of the code easier. */ tmp = gen_rtx_COMPARE (cmpmode, op0, op1); emit_insn (gen_rtx_SET (VOIDmode, flags, tmp)); /* Return the test that should be put into the flags user, i.e. the bcc, scc, or cmov instruction. */ return gen_rtx_fmt_ee (code, VOIDmode, flags, const0_rtx); } /* or32_expand_int_compare () */ /* -------------------------------------------------------------------------- */ /*!Generate insn patterns to do an integer compare of operands. We only deal with the case where the comparison is an integer comparison. This wrapper function potentially allows reuse for non-integer comparison in the future. @param[in] code RTX for the condition code. @param[in] op0 RTX for the first operand. @param[in] op1 RTX for the second operand. @return RTX for the comparison. */ /* -------------------------------------------------------------------------- */ static rtx or32_expand_compare (enum rtx_code code, rtx op0, rtx op1) { return or32_expand_int_compare (code, op0, op1); } /* or32_expand_compare () */ /* -------------------------------------------------------------------------- */ /*!Emit insns to use the l.cmov instruction Emit a compare and then cmov. Only works for integer first operand. @param[in] dest RTX for the destination operand. @param[in] op RTX for the comparison operation @param[in] true_cond RTX to move to dest if condition is TRUE. @param[in] false_cond RTX to move to dest if condition is FALSE. @return Non-zero (TRUE) if insns were emitted, zero (FALSE) otherwise. */ /* -------------------------------------------------------------------------- */ static int or32_emit_int_cmove (rtx dest, rtx op, rtx true_cond, rtx false_cond) { rtx condition_rtx, cr; if ((GET_MODE (or32_compare_op0) != SImode) && (GET_MODE (or32_compare_op0) != HImode) && (GET_MODE (or32_compare_op0) != QImode)) { return 0; } /* We still have to do the compare, because cmov doesn't do a compare, it just looks at the FLAG bit set by a previous compare instruction. */ condition_rtx = or32_expand_compare (GET_CODE (op), or32_compare_op0, or32_compare_op1); cr = XEXP (condition_rtx, 0); emit_insn (gen_cmov (dest, condition_rtx, true_cond, false_cond, cr)); return 1; } /* or32_emit_int_cmove () */ /* -------------------------------------------------------------------------- */ /*!Calculate stack size for current function. We need space for: - any callee-saved registers that are live in the function - any local variables - the return address (if saved) - the frame pointer (if saved) - any outgoing arguments. We also return information on whether the return address and frame pointer must be saved, the space required to save callee-saved registers and the sapce required to save the return address, frame pointer and outgoing arguments. Throughout adjust for OR32 alignment requirements. @param[in] vars Bytes required for local variables (if any). @param[out] lr_save_area Space required for return address (if any). @param[out] fp_save_area Space required for frame pointer (if any). @param[out] gpr_save_area Space required for callee-saved registers (if any). @param[out] save_area Space required for outgoing arguments (if any) + return address (if any) and frame pointer (if any). @return Total space required (if any). */ /* -------------------------------------------------------------------------- */ static int calculate_stack_size (int vars, int *lr_save_area, int *fp_save_area, int *gpr_save_area, int *save_area) { int regno; *gpr_save_area = 0; for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) { if (df_regs_ever_live_p(regno) && !call_used_regs[regno]) *gpr_save_area += 4; } *lr_save_area = (!current_function_is_leaf || df_regs_ever_live_p(LINK_REGNUM)) ? 4 : 0; *fp_save_area = frame_pointer_needed ? 4 : 0; *save_area = (OR32_ALIGN (crtl->outgoing_args_size, 4) + *lr_save_area + *fp_save_area); return *save_area + *gpr_save_area + OR32_ALIGN (vars, 4); } /* calculate_stack_size () */ /* -------------------------------------------------------------------------- */ /*!Is this a value suitable for an OR32 address displacement? Must be an integer (signed) which fits into 16-bits. If the result is a double word, we had better also check that we can also get at the second word. @param[in] mode Mode of the result for which this displacement will be used. @param[in] x RTX for an expression. @return Non-zero (TRUE) if this is a valid 16-bit offset, zero (FALSE) otherwise. */ /* -------------------------------------------------------------------------- */ static int or32_legitimate_displacement_p (enum machine_mode mode, rtx x) { if (CONST_INT == GET_CODE(x)) { HOST_WIDE_INT disp = INTVAL (x); /* Allow for a second access 4 bytes further on if double. */ if ((DFmode == mode) || (DImode == mode)) { return (-32768 < disp) && (disp <= 32763); } else { return (-32768 < disp) && (disp <= 32767); } } else { return 0; } } /* or32_legitimate_displacement_p () */ /* -------------------------------------------------------------------------- */ /*!Can this register be used as a base register? We need a strict version, for which the register must either be a hard register, or already renumbered to a hard register. For the non-strict version, any register (other than the flag register will do). @todo The code from the old port does not allow r0 as a base when strict, and does when non-strict. Surely it is always a valid register? @param[in] regno The register to test @param[in] strict Non-zero (TRUE) if this is a strict check, zero (FALSE) otherwise. @return Non-zero (TRUE) if this register can be used as a base register, zero (FALSE) otherwise. */ /* -------------------------------------------------------------------------- */ static bool or32_regnum_ok_for_base_p (HOST_WIDE_INT num, bool strict) { if (strict) { return (num < FIRST_PSEUDO_REGISTER) ? (num > 0) && (num <= OR32_LAST_INT_REG) : (reg_renumber[num] > 0) && (reg_renumber[num] <= OR32_LAST_INT_REG); } else { return (num <= OR32_LAST_INT_REG) || (num >= FIRST_PSEUDO_REGISTER); } } /* or32_regnum_ok_for_base_p () */ /* ========================================================================== */ /* Functions to support the Machine Description */ /* -------------------------------------------------------------------------- */ /*!Expand a prologue pattern. Called after register allocation to add any instructions needed for the prologue. Using a prologue insn is favored compared to putting all of the instructions in output_function_prologue(), since it allows the scheduler to intermix instructions with the saves of the caller saved registers. In some cases, it might be necessary to emit a barrier instruction as the last insn to prevent such scheduling. For the OR32 this is currently controlled by the -mlogue option. It should be the default, once it is proved to work. */ /* -------------------------------------------------------------------------- */ void or32_expand_prologue (void) { int total_size = or32_compute_frame_size (get_frame_size ()); rtx sp_rtx; rtx value_rtx; if (!total_size) /* No frame needed. */ return; sp_rtx = gen_rtx_REG (Pmode, STACK_POINTER_REGNUM); if (total_size > 32767) { value_rtx = gen_rtx_REG (Pmode, GP_ARG_RETURN); emit_frame_insn (gen_rtx_SET (Pmode, value_rtx, GEN_INT (total_size))); } else value_rtx = GEN_INT (total_size); /* Update the stack pointer to reflect frame size. */ emit_frame_insn (gen_rtx_SET (Pmode, stack_pointer_rtx, gen_rtx_MINUS (Pmode, stack_pointer_rtx, value_rtx))); if (frame_info.save_fp_p) { emit_frame_insn (gen_rtx_SET (Pmode, indexed_memory (stack_pointer_rtx, frame_info.fp_save_offset), frame_pointer_rtx)); emit_frame_insn (gen_rtx_SET (Pmode, frame_pointer_rtx, gen_rtx_PLUS (Pmode, frame_pointer_rtx, value_rtx))); } if (frame_info.save_lr_p) { emit_frame_insn (gen_rtx_SET (Pmode, indexed_memory (stack_pointer_rtx, frame_info.lr_save_offset), gen_rtx_REG (Pmode, LINK_REGNUM))); } if (frame_info.gpr_size) { int offset = 0; int regno; for (regno = 0; regno <= OR32_LAST_INT_REG; regno++) { HOST_WIDE_INT disp = frame_info.gpr_offset + offset; if (!(frame_info.mask & (1 << regno))) continue; emit_frame_insn (gen_rtx_SET (Pmode, indexed_memory (stack_pointer_rtx, disp), gen_rtx_REG (Pmode, regno))); offset = offset + UNITS_PER_WORD; } } } /* or32_expand_prologue () */ /* -------------------------------------------------------------------------- */ /*!Expand an epilogue pattern. Called after register allocation to add any instructions needed for the epilogue. Using an epilogue insn is favored compared to putting all of the instructions in output_function_epilogue(), since it allows the scheduler to intermix instructions with the restores of the caller saved registers. In some cases, it might be necessary to emit a barrier instruction as the first insn to prevent such scheduling. For the OR32 this is currently controlled by the -mlogue option. It should be the default, once it is proved to work. @param[in] sibcall Non-zero (TRUE) if this is a sibcall return, which can benefit from tail call optimization. Zero (FALSE) otherwise. */ /* -------------------------------------------------------------------------- */ void or32_expand_epilogue (int sibcall) { int total_size = or32_compute_frame_size (get_frame_size ()); rtx value_rtx; if (total_size > 32767) { value_rtx = gen_rtx_REG (Pmode, 3); emit_insn (gen_rtx_SET (Pmode, value_rtx, GEN_INT (total_size))); } else value_rtx = GEN_INT (total_size); if (frame_info.save_lr_p) { emit_insn (gen_rtx_SET (Pmode, gen_rtx_REG (Pmode, LINK_REGNUM), indexed_memory (stack_pointer_rtx, frame_info.lr_save_offset))); } if (frame_info.save_fp_p) { emit_insn (gen_rtx_SET (Pmode, gen_rtx_REG (Pmode, FRAME_POINTER_REGNUM), indexed_memory (stack_pointer_rtx, frame_info.fp_save_offset))); } if (frame_info.gpr_size) { int offset = 0; int regno; for (regno = 0; regno <= OR32_LAST_INT_REG; regno++) { HOST_WIDE_INT disp = frame_info.gpr_offset + offset; if (!(frame_info.mask & (1 << regno))) continue; emit_insn (gen_rtx_SET (Pmode, gen_rtx_REG (Pmode, regno), indexed_memory (stack_pointer_rtx, disp))); offset = offset + UNITS_PER_WORD; } } if (total_size) { emit_insn (gen_rtx_SET (Pmode, stack_pointer_rtx, gen_rtx_PLUS (Pmode, stack_pointer_rtx, value_rtx))); } if (!sibcall) emit_jump_insn (gen_return_internal (gen_rtx_REG( Pmode, 9))); } /* or32_expand_epilogue () */ /* -------------------------------------------------------------------------- */ /*!Generate assembler code for a movdi/movdf pattern @param[in] operands Operands to the movdx pattern. @return The assembler string to output (always "", since we've done the output here). */ /* -------------------------------------------------------------------------- */ const char * or32_output_move_double (rtx *operands) { rtx xoperands[3]; switch (GET_CODE (operands[0])) { case REG: if (GET_CODE (operands[1]) == REG) { if (REGNO (operands[0]) == REGNO (operands[1]) + 1) { output_asm_insn ("\tl.or \t%H0, %H1, r0", operands); output_asm_insn ("\tl.or \t%0, %1, r0", operands); return ""; } else { output_asm_insn ("\tl.or \t%0, %1, r0", operands); output_asm_insn ("\tl.or \t%H0, %H1, r0", operands); return ""; } } else if (GET_CODE (operands[1]) == MEM) { xoperands[1] = XEXP (operands[1], 0); if (GET_CODE (xoperands[1]) == REG) { xoperands[0] = operands[0]; if (REGNO (xoperands[0]) == REGNO (xoperands[1])) { output_asm_insn ("\tl.lwz \t%H0, 4(%1)", xoperands); output_asm_insn ("\tl.lwz \t%0, 0(%1)", xoperands); return ""; } else { output_asm_insn ("\tl.lwz \t%0, 0(%1)", xoperands); output_asm_insn ("\tl.lwz \t%H0, 4(%1)", xoperands); return ""; } } else if (GET_CODE (xoperands[1]) == PLUS) { if (GET_CODE (xoperands[2] = XEXP (xoperands[1], 1)) == REG) { xoperands[0] = operands[0]; xoperands[1] = XEXP (xoperands[1], 0); if (REGNO (xoperands[0]) == REGNO (xoperands[2])) { output_asm_insn ("\tl.lwz \t%H0, %1+4(%2)", xoperands); output_asm_insn ("\tl.lwz \t%0, %1(%2)", xoperands); return ""; } else { output_asm_insn ("\tl.lwz \t%0, %1(%2)", xoperands); output_asm_insn ("\tl.lwz \t%H0, %1+4(%2)", xoperands); return ""; } } else if (GET_CODE (xoperands[2] = XEXP (xoperands[1], 0)) == REG) { xoperands[0] = operands[0]; xoperands[1] = XEXP (xoperands[1], 1); if (REGNO (xoperands[0]) == REGNO (xoperands[2])) { output_asm_insn ("\tl.lwz \t%H0, %1+4(%2)", xoperands); output_asm_insn ("\tl.lwz \t%0, %1(%2)", xoperands); return ""; } else { output_asm_insn ("\tl.lwz \t%0, %1(%2)", xoperands); output_asm_insn ("\tl.lwz \t%H0, %1+4(%2)", xoperands); return ""; } } else abort (); } else abort (); } else if (GET_CODE (operands[1]) == CONST_INT) { if (INTVAL (operands[1]) < 0) output_asm_insn ("\tl.addi \t%0, r0, -1", operands); else output_asm_insn ("\tl.or \t%0, r0, r0", operands); output_asm_insn ("\tl.movhi \t%H0, hi(%1)", operands); output_asm_insn ("\tl.ori \t%H0, %H0, lo(%1)", operands); return ""; } else abort (); case MEM: xoperands[0] = XEXP (operands[0], 0); if (GET_CODE (xoperands[0]) == REG) { xoperands[1] = operands[1]; output_asm_insn ("\tl.sw \t0(%0), %1", xoperands); output_asm_insn ("\tl.sw \t4(%0), %H1", xoperands); return ""; } else if (GET_CODE (xoperands[0]) == PLUS) { if (GET_CODE (xoperands[1] = XEXP (xoperands[0], 1)) == REG) { xoperands[0] = XEXP (xoperands[0], 0); xoperands[2] = operands[1]; output_asm_insn ("\tl.sw \t%0(%1), %2", xoperands); output_asm_insn ("\tl.sw \t%0+4(%1), %H2", xoperands); return ""; } else if (GET_CODE (xoperands[1] = XEXP (xoperands[0], 0)) == REG) { xoperands[0] = XEXP (xoperands[0], 1); xoperands[2] = operands[1]; output_asm_insn ("\tl.sw \t%0(%1), %2", xoperands); output_asm_insn ("\tl.sw \t%0+4(%1), %H2", xoperands); return ""; } else abort (); } else { fprintf (stderr, " O/p error %s\n", GET_RTX_NAME (GET_CODE (xoperands[0]))); return ""; /* abort (); */ } default: abort (); } } /* or32_output_move_double () */ /* -------------------------------------------------------------------------- */ /*!Expand a conditional branch @param[in] operands Operands to the branch. @param[in] mode Mode of the comparison. */ /* -------------------------------------------------------------------------- */ void or32_expand_conditional_branch (rtx *operands, enum machine_mode mode) { rtx tmp; enum rtx_code test_code = GET_CODE(operands[0]); switch (mode) { case SImode: tmp = or32_expand_compare (test_code, operands[1], operands[2]); tmp = gen_rtx_IF_THEN_ELSE (VOIDmode, tmp, gen_rtx_LABEL_REF (VOIDmode, operands[3]), pc_rtx); emit_jump_insn (gen_rtx_SET (VOIDmode, pc_rtx, tmp)); return; case SFmode: tmp = or32_expand_compare (test_code, operands[1], operands[2]); tmp = gen_rtx_IF_THEN_ELSE (VOIDmode, tmp, gen_rtx_LABEL_REF (VOIDmode, operands[3]), pc_rtx); emit_jump_insn (gen_rtx_SET (VOIDmode, pc_rtx, tmp)); return; default: abort (); } } /* or32_expand_conditional_branch () */ /* -------------------------------------------------------------------------- */ /*!Emit a conditional move move "true_cond" to "dest" if "op" of the operands of the last comparison is nonzero/true, "false_cond" if it is zero/false. @param[in] dest RTX for the destination operand. @param[in] op RTX for the comparison operation @param[in] true_cond RTX to move to dest if condition is TRUE. @param[in] false_cond RTX to move to dest if condition is FALSE. @return Non-zero (TRUE) if the hardware supports such an operation, zero (FALSE) otherwise. */ /* -------------------------------------------------------------------------- */ int or32_emit_cmove (rtx dest, rtx op, rtx true_cond, rtx false_cond) { enum machine_mode result_mode = GET_MODE (dest); if (GET_MODE (true_cond) != result_mode) return 0; if (GET_MODE (false_cond) != result_mode) return 0; /* First, work out if the hardware can do this at all */ return or32_emit_int_cmove (dest, op, true_cond, false_cond); } /* or32_emit_cmove () */ /* -------------------------------------------------------------------------- */ /*!Output the assembler for a branch on flag instruction. @param[in] operands Operands to the branch. @return The assembler string to use. */ /* -------------------------------------------------------------------------- */ const char * or32_output_bf (rtx * operands) { enum rtx_code code; enum machine_mode mode_calc, mode_got; code = GET_CODE (operands[1]); mode_calc = SELECT_CC_MODE (code, or32_compare_op0, or32_compare_op1); mode_got = GET_MODE (operands[2]); if (!TARGET_MASK_ALIGNED_JUMPS) { if (mode_calc != mode_got) return "\tl.bnf\t%l0%("; else return "\tl.bf\t%l0%("; } else { if (mode_calc != mode_got) return "\t.balignl\t0x8,0x15000015,0x4\n\tl.bnf\t%l0%("; else return "\t.balignl 0x8,0x15000015,0x4;\n\tl.bf\t%l0%("; } } /* or32_output_bf () */ /* -------------------------------------------------------------------------- */ /*!Output the assembler for a conditional move instruction. @param[in] operands Operands to the conditional move. @return The assembler string to use. */ /* -------------------------------------------------------------------------- */ const char * or32_output_cmov (rtx * operands) { enum rtx_code code; enum machine_mode mode_calc, mode_got; code = GET_CODE (operands[1]); mode_calc = SELECT_CC_MODE (code, or32_compare_op0, or32_compare_op1); mode_got = GET_MODE (operands[4]); if (mode_calc != mode_got) return "\tl.cmov\t%0,%3,%2"; /* reversed */ else return "\tl.cmov\t%0,%2,%3"; } /* or32_output_cmov () */ /* -------------------------------------------------------------------------- */ /*!Expand a sibcall pattern. For now this is very simple way for sibcall support (i.e tail call optimization). @param[in] result Not sure. RTX for the result location? @param[in] addr Not sure. RXT for the address to call? @param[in] args_size Not sure. RTX for the size of the args (in bytes?)? */ /* -------------------------------------------------------------------------- */ void or32_expand_sibcall (rtx result ATTRIBUTE_UNUSED, rtx addr, rtx args_size) { emit_call_insn (gen_sibcall_internal (addr, args_size)); } /* or32_expand_sibcall () */ /* -------------------------------------------------------------------------- */ /*!Load a 32-bit constant. We know it can't be done in one insn when we get here, the movsi expander guarantees this. @param[in] op0 RTX for the destination. @param[in] op1 RTX for the (constant) source. */ /* -------------------------------------------------------------------------- */ void or32_emit_set_const32 (rtx op0, rtx op1) { enum machine_mode mode = GET_MODE (op0); rtx temp; /* Sanity check that we really can't do it in one instruction. I.e that we don't have a 16-bit constant. */ if (GET_CODE (op1) == CONST_INT) { HOST_WIDE_INT val = INTVAL (op1) & GET_MODE_MASK (mode); if ((-32768 <= val) && (val <= 32767)) { abort (); } } /* Full 2-insn decomposition is needed. */ if (reload_in_progress || reload_completed) temp = op0; else temp = gen_reg_rtx (mode); if (GET_CODE (op1) == CONST_INT) { /* Emit them as real moves instead of a HIGH/LO_SUM, this way CSE can see everything and reuse intermediate values if it wants. */ emit_insn (gen_rtx_SET (VOIDmode, temp, GEN_INT (INTVAL (op1) & ~(HOST_WIDE_INT) 0xffff))); emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_IOR (mode, temp, GEN_INT (INTVAL (op1) & 0xffff)))); } else { /* since or32 bfd can not deal with relocs that are not of type OR32_CONSTH_RELOC + OR32_CONST_RELOC (ie move high must be followed by exactly one lo_sum) */ emit_insn (gen_movsi_insn_big (op0, op1)); } } /* or32_emit_set_const32 () */ /* ========================================================================== */ /* Target hook functions. These are initialized at the end of this file, to avoid having to predeclare all the functions. They are only needed here, so are static. */ /* -------------------------------------------------------------------------- */ /*!Set up the stack and frame pointer (if desired) for the function. If defined, a function that outputs the assembler code for entry to a function. The prologue is responsible for setting up the stack frame, initializing the frame pointer register, saving registers that must be saved, and allocating "size" additional bytes of storage for the local variables. "size" is an integer. "file" is a stdio stream to which the assembler code should be output. The label for the beginning of the function need not be output by this macro. That has already been done when the macro is run. To determine which registers to save, the macro can refer to the array "regs_ever_live": element "r" is nonzero if hard register "r" is used anywhere within the function. This implies the function prologue should save register r, provided it is not one of the call-used registers. (TARGET_ASM_FUNCTION_EPILOGUE must likewise use "regs_ever_live".) On machines that have "register windows", the function entry code does not save on the stack the registers that are in the windows, even if they are supposed to be preserved by function calls; instead it takes appropriate steps to “push” the register stack, if any non-call-used registers are used in the function. On machines where functions may or may not have frame-pointers, the function entry code must vary accordingly; it must set up the frame pointer if one is wanted, and not otherwise. To determine whether a frame pointer is in wanted, the macro can refer to the variable frame_pointer_needed. The variable’s value will be 1 at run time in a function that needs a frame pointer. See the section on "Eliminating Frame Pointer and Arg Pointer" in the "Target Description Macros and Functions" chapter of the GCC internals manual. The function entry code is responsible for allocating any stack space required for the function. This stack space consists of the regions listed below. In most cases, these regions are allocated in the order listed, with the last listed region closest to the top of the stack (the lowest address if STACK_GROWS_DOWNWARD is defined, and the highest address if it is not defined). You can use a different order for a machine if doing so is more convenient or required for compatibility reasons. Except in cases where required by standard or by a debugger, there is no reason why the stack layout used by GCC need agree with that used by other compilers for a machine. @param[in] file File handle for any generated code. @param[in] size Number of bytes of storage needed for local variables. */ /* -------------------------------------------------------------------------- */ static void or32_output_function_prologue (FILE *file, HOST_WIDE_INT size) { int save_area; int gpr_save_area; int lr_save_area; int fp_save_area; int stack_size; int regno; /* If we are doing the prologue using the "prologue" pattern in the machine description, do nothing more here. JPB 30-Aug-10: Surely that is not correct. If this option is set, we should never even be called! */ if (TARGET_MASK_SCHED_LOGUE) return; if (size < 0) abort (); /* Work out and log the frame size */ stack_size = calculate_stack_size (size, &lr_save_area, &fp_save_area, &gpr_save_area, &save_area); fprintf (file, "\n\t# gpr_save_area %d size %ld crtl->outgoing_args_size %d\n", gpr_save_area, size, crtl->outgoing_args_size); /* Decrement the stack pointer by the total frame size (if we have a frame). */ if (stack_size > 0) { /* Special code for large stack frames */ if (stack_size >= 0x8000) { fprintf (file, "\tl.movhi\tr%d,hi(%d)\n", GP_ARG_RETURN, stack_size); fprintf (file, "\tl.ori\tr%d,r%d,lo(%d)\n", GP_ARG_RETURN, GP_ARG_RETURN, stack_size); fprintf (file, "\tl.sub\tr%d,r%d,r%d\n", STACK_POINTER_REGNUM, STACK_POINTER_REGNUM, GP_ARG_RETURN); } else { fprintf (file, "\tl.addi\tr%d,r%d,%d\n", STACK_POINTER_REGNUM, STACK_POINTER_REGNUM, -stack_size); } /* Update the DWARF2 CFA using the new stack pointer. After this the CFA will be the SP + frame size, i.e. the FP (or start of frame if we don't actually have a FP). All register refs should relate to this. */ if (dwarf2out_do_frame ()) { char *l = dwarf2out_cfi_label (false); dwarf2out_def_cfa (l, STACK_POINTER_REGNUM, stack_size); } } /* Update the frame pointer if necessary */ if (fp_save_area) { char *l = dwarf2out_cfi_label (false); int offset = OR32_ALIGN (crtl->outgoing_args_size, 4) + lr_save_area; fprintf (file, "\tl.sw\t%d(r%d),r%d\n", offset, STACK_POINTER_REGNUM, FRAME_POINTER_REGNUM); if (stack_size >= 0x8000) fprintf (file, "\tl.add\tr%d,r%d,r%d\n", FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM, GP_ARG_RETURN); else fprintf (file, "\tl.addi\tr%d,r%d,%d\n", FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM, stack_size); /* The CFA is already pointing at the start of our frame (i.e. the new FP). The old FP has been saved relative to the SP, so we need to use stack_size to work out where. */ dwarf2out_reg_save (l, FRAME_POINTER_REGNUM, offset - stack_size); } /* Save the return address if necessary */ if (lr_save_area) { char *l = dwarf2out_cfi_label (false); int offset = OR32_ALIGN (crtl->outgoing_args_size, 4); fprintf (file, "\tl.sw\t%d(r%d),r%d\n", offset, STACK_POINTER_REGNUM, LINK_REGNUM); /* The CFA is already pointing at the start of our frame (i.e. the new FP). The LR has been saved relative to the SP, so we need to use stack_size to work out where. */ dwarf2out_reg_save (l, FRAME_POINTER_REGNUM, offset - stack_size); } save_area = (OR32_ALIGN (crtl->outgoing_args_size, 4) + lr_save_area + fp_save_area); /* Save any callee saved registers */ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) { if (df_regs_ever_live_p(regno) && !call_used_regs[regno]) { char *l = dwarf2out_cfi_label (false); fprintf (file, "\tl.sw\t%d(r%d),r%d\n", save_area, STACK_POINTER_REGNUM, regno); /* The CFA is already pointing at the start of our frame (i.e. the new FP). The register has been saved relative to the SP, so we need to use stack_size to work out where. */ dwarf2out_reg_save (l, FRAME_POINTER_REGNUM, save_area - stack_size); save_area += 4; } } } /* or32_output_function_prologue () */ /* -------------------------------------------------------------------------- */ /*!Do any necessary cleanup after a function to restore stack, frame, and regs. This is a function that outputs the assembler code for exit from a function. The epilogue is responsible for restoring the saved registers and stack pointer to their values when the function was called, and returning control to the caller. This macro takes the same arguments as the macro TARGET_ASM_FUNCTION_PROLOGUE, and the registers to restore are determined from regs_ever_live and CALL_USED_REGISTERS in the same way (@see or32_output_function_prologue ()) . On some machines, there is a single instruction that does all the work of returning from the function. On these machines, give that instruction the name "return" (in the machine definition) and do not define the macro TARGET_ASM_FUNCTION_EPILOGUE at all. Do not define a pattern named "return" if you want the TARGET_ASM_FUNCTION_EPILOGUE to be used. If you want the target switches to control whether return instructions or epilogues are used, define a "return" pattern with a validity condition that tests the target switches appropriately. If the "return" pattern’s validity condition is false, epilogues will be used. On machines where functions may or may not have frame-pointers, the function exit code must vary accordingly. Sometimes the code for these two cases is completely different. To determine whether a frame pointer is wanted, the macro can refer to the variable frame_pointer_needed. The variable’s value will be 1 when compiling a function that needs a frame pointer. Normally, TARGET_ASM_FUNCTION_PROLOGUE and TARGET_ASM_FUNCTION_EPILOGUE must treat leaf functions specially. The C variable "current_function_is_leaf" is nonzero for such a function. See "Handling Leaf Functions" in the "Target Description Macros and Functions" section of the GCC internals manual. On some machines, some functions pop their arguments on exit while others leave that for the caller to do. For example, the 68020 when given "-mrtd" pops arguments in functions that take a fixed number of arguments. Your definition of the macro RETURN_POPS_ARGS decides which functions pop their own arguments. TARGET_ASM_FUNCTION_EPILOGUE needs to know what was decided. The number of bytes of the current function’s arguments that this function should pop is available in "crtl->args.pops_args". See "How Scalar Function Values Are Returned" in the "Target Description Macros and Functions" section of the GCC internals manual. @param[in] file File handle for any generated code. @param[in] size Number of bytes of storage needed for local variables. */ /* -------------------------------------------------------------------------- */ static void or32_output_function_epilogue (FILE * file, HOST_WIDE_INT size) { int save_area; int gpr_save_area; int lr_save_area; int fp_save_area; int stack_size; int regno; /* If we are doing the epilogue using the "epilogue" pattern in the machine description, do nothing more here. JPB 30-Aug-10: Surely that is not correct. If this option is set, we should never even be called! */ if (TARGET_MASK_SCHED_LOGUE) return; /* Work out the frame size */ stack_size = calculate_stack_size (size, &lr_save_area, &fp_save_area, &gpr_save_area, &save_area); /* Restore the return address if necessary */ if (lr_save_area) { fprintf (file, "\tl.lwz\tr%d,%d(r%d)\n", LINK_REGNUM, OR32_ALIGN (crtl->outgoing_args_size, 4), STACK_POINTER_REGNUM); } /* Restore the frame pointer if necessary */ if (fp_save_area) { fprintf (file, "\tl.lwz\tr%d,%d(r%d)\n", FRAME_POINTER_REGNUM, OR32_ALIGN (crtl->outgoing_args_size, 4) + lr_save_area, STACK_POINTER_REGNUM); } save_area = (OR32_ALIGN (crtl->outgoing_args_size, 4) + lr_save_area + fp_save_area); /* Restore any callee-saved registers */ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) { if (df_regs_ever_live_p(regno) && !call_used_regs[regno]) { fprintf (file, "\tl.lwz\tr%d,%d(r%d)\n", regno, save_area, STACK_POINTER_REGNUM); save_area += 4; } } /* Restore the stack pointer (if necessary) */ if (stack_size >= 0x8000) { fprintf (file, "\tl.movhi\tr3,hi(%d)\n", stack_size); fprintf (file, "\tl.ori\tr3,r3,lo(%d)\n", stack_size); if (!TARGET_MASK_ALIGNED_JUMPS) fprintf (file, "\tl.jr\tr%d\n", LINK_REGNUM); else { fprintf (file, "\t.balignl\t0x8,0x15000015,0x4\n"); fprintf (file, "\tl.jr\tr%d\n", LINK_REGNUM); } fprintf (file, "\tl.add\tr%d,r%d,r3\n", STACK_POINTER_REGNUM, STACK_POINTER_REGNUM); } else if (stack_size > 0) { if (!TARGET_MASK_ALIGNED_JUMPS) fprintf (file, "\tl.jr\tr%d\n", LINK_REGNUM); else { fprintf (file, "\t.balignl 0x8,0x15000015,0x4\n"); fprintf (file, "\tl.jr\tr%d\n", LINK_REGNUM); } fprintf (file, "\tl.addi\tr%d,r%d,%d\n", STACK_POINTER_REGNUM, STACK_POINTER_REGNUM, stack_size); } else { if (!TARGET_MASK_ALIGNED_JUMPS) fprintf (file, "\tl.jr\tr%d\n", LINK_REGNUM); else { fprintf (file, "\t.balignl\t0x8,0x15000015,0x4\n"); fprintf (file, "\tl.jr\tr%d\n", LINK_REGNUM); } fprintf (file, "\tl.nop\n"); /* Delay slot */ } } /* or32_output_function_epilogue () */ /* -------------------------------------------------------------------------- */ /*!Define where a function returns values. Define this to return an RTX representing the place where a function returns or receives a value of data type ret type, a tree node representing a data type. "func" is a tree node representing FUNCTION_DECL or FUNCTION_TYPE of a function being called. If "outgoing" is false, the hook should compute the register in which the caller will see the return value. Otherwise, the hook should return an RTX representing the place where a function returns a value. On many machines, only TYPE_MODE ("ret_type") is relevant. (Actually, on most machines, scalar values are returned in the same place regardless of mode.) The value of the expression is usually a reg RTX for the hard register where the return value is stored. The value can also be a parallel RTX, if the return value is in multiple places. See FUNCTION_ARG for an explanation of the parallel form. Note that the callee will populate every location specified in the parallel, but if the first element of the parallel contains the whole return value, callers will use that element as the canonical location and ignore the others. The m68k port uses this type of parallel to return pointers in both ‘%a0’ (the canonical location) and ‘%d0’. If TARGET_PROMOTE_FUNCTION_RETURN returns true, you must apply the same promotion rules specified in PROMOTE_MODE if valtype is a scalar type. If the precise function being called is known, "func" is a tree node (FUNCTION_DECL) for it; otherwise, "func" is a null pointer. This makes it possible to use a different value-returning convention for specific functions when all their calls are known. Some target machines have "register windows" so that the register in which a function returns its value is not the same as the one in which the caller sees the value. For such machines, you should return different RTX depending on outgoing. TARGET_FUNCTION_VALUE is not used for return values with aggregate data types, because these are returned in another way. See TARGET_STRUCT_VALUE_RTX and related macros. For the OR32, we can just use the result of LIBCALL_VALUE, since all functions return their result in the same place (register rv = r11). JPB 30-Aug-10: What about 64-bit scalar returns (long long int, double), which also use rvh (=r12)? @param[in] ret_type The return type of the function. @param[in] func Tree representing function being called. @param[in] outgoing Non-zero (TRUE) if the result represents where the function places the results, zero (FALSE) if the result represents where the caller sees the result. @return A RTX representing where the result can be found. */ /* -------------------------------------------------------------------------- */ static rtx or32_function_value (const_tree ret_type, const_tree func ATTRIBUTE_UNUSED, bool outgoing ATTRIBUTE_UNUSED) { return LIBCALL_VALUE (TYPE_MODE(ret_type)); } /* or32_function_value () */ /* -------------------------------------------------------------------------- */ /*!Check if a function is suitable for tail call optimization. True if it is OK to do sibling call optimization for the specified call expression "exp". "decl" will be the called function, or NULL if this is an indirect call. It is not uncommon for limitations of calling conventions to prevent tail calls to functions outside the current unit of translation, or during PIC compilation. The hook is used to enforce these restrictions, as the sibcall md pattern can not fail, or fall over to a “normal” call. The criteria for successful sibling call optimization may vary greatly between different architectures. For the OR32, we currently allow sibcall optimization if the -msibcall argument is passed. JPB 30-Aug-10: Surely we should always allow this? @param[in] decl The function for which we may optimize @param[in] exp The call expression which is candidate for optimization. @return Non-zero (TRUE) if sibcall optimization is permitted, zero (FALSE) otherwise. */ /* -------------------------------------------------------------------------- */ static bool or32_function_ok_for_sibcall (tree decl ATTRIBUTE_UNUSED, tree exp ATTRIBUTE_UNUSED) { return TARGET_MASK_SIBCALL; } /* or32_function_ok_for_sibcall () */ /* -------------------------------------------------------------------------- */ /*!Should an argument be passed by reference. This target hook should return true if an argument at the position indicated by "cum" should be passed by reference. This predicate is queried after target independent reasons for being passed by reference, such as TREE_ADDRESSABLE ("type"). If the hook returns TRUE, a copy of that argument is made in memory and a pointer to the argument is passed instead of the argument itself. The pointer is passed in whatever way is appropriate for passing a pointer to that type. For the OR32, all aggregates and arguments greater than 8 bytes are passed this way. @param[in] cum Position of argument under consideration. @param[in[ mode Not sure what this relates to. @param[in] type Type of the argument. @param[in] named Not sure what this relates to. @return Non-zero (TRUE) if the argument should be passed by reference, zero (FALSE) otherwise. */ /* -------------------------------------------------------------------------- */ static bool or32_pass_by_reference (CUMULATIVE_ARGS *cum ATTRIBUTE_UNUSED, enum machine_mode mode ATTRIBUTE_UNUSED, const_tree type, bool named ATTRIBUTE_UNUSED) { return (type && (AGGREGATE_TYPE_P (type) || int_size_in_bytes (type) > 8)); } /* or32_pass_by_reference () */ /* -------------------------------------------------------------------------- */ /*!Is a frame pointer required? This target hook should return TRUE if a function must have and use a frame pointer. This target hook is called in the reload pass. If its return value is TRUE the function will have a frame pointer. This target hook can in principle examine the current function and decide according to the facts, but on most machines the constant false or the constant true suffices. Use FALSE when the machine allows code to be generated with no frame pointer, and doing so saves some time or space. Use TRUE when there is no possible advantage to avoiding a frame pointer. In certain cases, the compiler does not know how to produce valid code without a frame pointer. The compiler recognizes those cases and automatically gives the function a frame pointer regardless of what TARGET_FRAME_POINTER_REQUIRED returns. You don’t need to worry about them. In a function that does not require a frame pointer, the frame pointer register can be allocated for ordinary usage, unless you mark it as a fixed register. See FIXED_REGISTERS for more information. Default return value is false. For the OR32 we do not need the frame pointer, so the default would have sufficed. JPB 30-Aug-10: The version supplied returned TRUE, which is patently the wrong answer. This function really could be eliminated and the default used. @return Non-zero (TRUE) if a frame pointer is not required, zero (FALSE) otherwise. */ /* -------------------------------------------------------------------------- */ static bool or32_frame_pointer_required (void) { return 1; } /* or32_frame_pointer_required () */ /* -------------------------------------------------------------------------- */ /*!How many bytes at the beginning of an argument must be put into registers. This target hook returns the number of bytes at the beginning of an argument that must be put in registers. The value must be zero for arguments that are passed entirely in registers or that are entirely pushed on the stack. On some machines, certain arguments must be passed partially in registers and partially in memory. On these machines, typically the first few words of arguments a re passed in registers, and the rest on the stack. If a multi-word argument (a double or a structure) crosses that boundary, its first few words must be passed in registers and the rest must be pushed. This macro tells the compiler when this occurs, and how many bytes should go in registers. FUNCTION_ARG for these arguments should return the first register to be used by the caller for this argument; likewise FUNCTION_INCOMING_ARG, for the called function. On the OR32 we never split argumetns between registers and memory. JPB 30-Aug-10: Is this correct? Surely we should allow this. The ABI spec is incomplete on this point. @param[in] cum Position of argument under consideration. @param[in[ mode Not sure what this relates to. @param[in] type Type of the argument. @param[in] named Not sure what this relates to. @return The number of bytes of the argument to go into registers */ /* -------------------------------------------------------------------------- */ static int or32_arg_partial_bytes (CUMULATIVE_ARGS *cum ATTRIBUTE_UNUSED, enum machine_mode mode ATTRIBUTE_UNUSED, tree type ATTRIBUTE_UNUSED, bool named ATTRIBUTE_UNUSED) { return 0; } /* or32_arg_partial_bytes () */ /* -------------------------------------------------------------------------- */ /*!Promote the mode of a function's arguments/return value. Like PROMOTE_MODE, but it is applied to outgoing function arguments or function return values. The target hook should return the new mode and possibly change "*punsignedp" if the promotion should change signedness. This function is called only for scalar or pointer types. "for_return" allows to distinguish the promotion of arguments and return values. If it is 1, a return value is being promoted and TARGET_FUNCTION_VALUE must perform the same promotions done here. If it is 2, the returned mode should be that of the register in which an incoming parameter is copied, or the outgoing result is computed; then the hook should return the same mode as PROMOTE_MODE, though the signedness may be different. The default is to not promote arguments and return values. You can also define the hook to "default_promote_function_mode_always_promote" if you would like to apply the same rules given by PROMOTE_MODE. For the OR32, if the size of the mode is integral and less than 4, we promote to SImode, otherwise we return the mode we are supplied. @param[in] type Not sure. Type of the argument? @param[in] mode The mode of argument/return value to consider. @param[out] punsignedp Signedness of the value. @param[in] fntype Not sure. Type of the function? @param[in] for_return 1 if a return value, 2 if an incoming value. @return The new mode. */ /* -------------------------------------------------------------------------- */ static enum machine_mode or32_promote_function_mode (const_tree type ATTRIBUTE_UNUSED, enum machine_mode mode, int *punsignedp ATTRIBUTE_UNUSED, const_tree fntype ATTRIBUTE_UNUSED, int for_return ATTRIBUTE_UNUSED) { return ( (GET_MODE_CLASS (mode) == MODE_INT) && (GET_MODE_SIZE (mode) < 4)) ? SImode : mode; } /* or32_promote_function_mode () */ /* -------------------------------------------------------------------------- */ /*!Is this a legitimate address? A function that returns whether x (an RTX) is a legitimate memory address on the target machine for a memory operand of mode mode. Legitimate addresses are defined in two variants: a strict variant and a non-strict one. The strict parameter chooses which variant is desired by the caller. The strict variant is used in the reload pass. It must be defined so that any pseudo- register that has not been allocated a hard register is considered a memory reference. This is because in contexts where some kind of register is required, a pseudo-register with no hard register must be rejected. For non-hard registers, the strict variant should look up the reg_renumber array; it should then proceed using the hard register number in the array, or treat the pseudo as a memory reference if the array holds -1. The non-strict variant is used in other passes. It must be defined to accept all pseudo-registers in every context where some kind of register is required. Normally, constant addresses which are the sum of a symbol_ref and an integer are stored inside a const RTX to mark them as constant. Therefore, there is no need to recognize such sums specifically as legitimate addresses. Normally you would simply recognize any const as legitimate. Usually PRINT_OPERAND_ADDRESS is not prepared to handle constant sums that are not marked with const. It assumes that a naked plus indicates indexing. If so, then you must reject such naked constant sums as illegitimate addresses, so that none of them will be given to PRINT_OPERAND_ADDRESS. On some machines, whether a symbolic address is legitimate depends on the section that the address refers to. On these machines, define the target hook TARGET_ENCODE_ SECTION_INFO to store the information into the symbol_ref, and then check for it here. When you see a const, you will have to look inside it to find the symbol_ref in order to determine the section. See the internals manual section on "Assembler Format" for more info. Some ports are still using a deprecated legacy substitute for this hook, the GO_IF_LEGITIMATE_ADDRESS macro. This macro has this syntax: #define GO_IF_LEGITIMATE_ADDRESS (mode, x, label ) and should goto label if the address x is a valid address on the target machine for a memory operand of mode mode. Whether the strict or non-strict variants are desired is defined by the REG_OK_STRICT macro introduced earlier in this section. Using the hook is usually simpler because it limits the number of files that are recompiled when changes are made. The OR32 only has a single addressing mode, which is a base register with 16-bit displacement. We can accept just 16-bit constants as addresses (they can use r0 as base address, and we can accept plain registers as addresses (they can use a displacement of zero). @param[in] mode The mode of the address @param[in] x The address (RTX) @param[in] strict Non-zero (TRUE) if we are in "strict" mode, zero (FALSE) otherwise. @return Non-zero (TRUE) if this is a legitimate address, zero (FALSE) otherwise. */ /* -------------------------------------------------------------------------- */ static bool or32_legitimate_address_p (enum machine_mode mode, rtx x, bool strict) { /* You might think 16-bit constants are suitable. They can be built into addresses using r0 as the base. However this seems to lead to defective code. So for now this is a placeholder, and this code is not used. if (or32_legitimate_displacement_p (mode, x)) { return 1; } */ /* Addresses consisting of a register and 16-bit displacement are also suitable. We need the mode, since for double words, we had better be able to address the full 8 bytes. */ if (GET_CODE(x) == PLUS) { rtx reg = XEXP(x,0); /* If valid register... */ if ((GET_CODE(reg) == REG) && or32_regnum_ok_for_base_p (INTVAL (reg), strict)) { rtx offset = XEXP(x,1); /* ...and valid offset */ if (or32_legitimate_displacement_p (mode, offset)) { return 1; } } } /* Addresses consisting of just a register are OK. They can be built into addresses using an offset of zero (and an offset of four if double word). */ if (GET_CODE(x) == REG && or32_regnum_ok_for_base_p( INTVAL (x), strict)) { return 1; } return 0; } /* or32_legitimate_address_p () */ /* -------------------------------------------------------------------------- */ /*!Provide support for DW_AT_calling_convention Define this to enable the dwarf attribute DW_AT_calling_convention to be emitted for each function. Instead of an integer return the enum value for the DW_CC_ tag. To support optional call frame debugging information, you must also define INCOMING_RETURN_ADDR_RTX and either set RTX_FRAME_RELATED_P on the prologue insns if you use RTL for the prologue, or call "dwarf2out_def_cfa" and "dwarf2out_reg_save" as appropriate from TARGET_ASM_FUNCTION_PROLOGUE if you don’t. For the OR32, it should be sufficient to return DW_CC_normal in all cases. @param[in] function The function requiring debug information @return The enum of the DW_CC tag. */ /* -------------------------------------------------------------------------- */ static int or32_dwarf_calling_convention (const_tree function ATTRIBUTE_UNUSED) { return DW_CC_normal; } /* or32_dwarf_calling_convention () */ /* ========================================================================== */ /* Target hook initialization. In most cases these use the static functions declared above. They have defaults, so must be undefined first, before being redefined. The description of what they do is found with the function above, unless it is a standard function, in which case it is defined here (as with TARGET_ASM_NAMED_SECTION). The final declaration is of the global "targetm" structure. */ /* Output assembly directives to switch to section name. The section should have attributes as specified by flags, which is a bit mask of the SECTION_* flags defined in ‘output.h’. If decl is non-NULL, it is the VAR_DECL or FUNCTION_DECL with which this section is associated. For OR32, we use the default ELF sectioning. */ #undef TARGET_ASM_NAMED_SECTION #define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section #undef TARGET_ASM_FUNCTION_PROLOGUE #define TARGET_ASM_FUNCTION_PROLOGUE or32_output_function_prologue #undef TARGET_ASM_FUNCTION_EPILOGUE #define TARGET_ASM_FUNCTION_EPILOGUE or32_output_function_epilogue #undef TARGET_FUNCTION_VALUE #define TARGET_FUNCTION_VALUE or32_function_value #undef TARGET_FUNCTION_OK_FOR_SIBCALL #define TARGET_FUNCTION_OK_FOR_SIBCALL or32_function_ok_for_sibcall #undef TARGET_PASS_BY_REFERENCE #define TARGET_PASS_BY_REFERENCE or32_pass_by_reference #undef TARGET_FRAME_POINTER_REQUIRED #define TARGET_FRAME_POINTER_REQUIRED or32_frame_pointer_required #undef TARGET_ARG_PARTIAL_BYTES #define TARGET_ARG_PARTIAL_BYTES or32_arg_partial_bytes /* This target hook returns TRUE if an argument declared in a prototype as an integral type smaller than int should actually be passed as an int. In addition to avoiding errors in certain cases of mismatch, it also makes for better code on certain machines. The default is to not promote prototypes. For the OR32 we do require this, so use a utility hook, which always returns TRUE. */ #undef TARGET_PROMOTE_PROTOTYPES #define TARGET_PROMOTE_PROTOTYPES hook_bool_const_tree_true #undef TARGET_PROMOTE_FUNCTION_MODE #define TARGET_PROMOTE_FUNCTION_MODE or32_promote_function_mode #undef TARGET_LEGITIMATE_ADDRESS_P #define TARGET_LEGITIMATE_ADDRESS_P or32_legitimate_address_p #undef TARGET_DWARF_CALLING_CONVENTION #define TARGET_DWARF_CALLING_CONVENTION or32_dwarf_calling_convention /* Trampoline stubs are yet to be written. */ /* #define TARGET_ASM_TRAMPOLINE_TEMPLATE */ /* #define TARGET_TRAMPOLINE_INIT */ /* Initialize the GCC target structure. */ struct gcc_target targetm = TARGET_INITIALIZER;
Go to most recent revision | Compare with Previous | Blame | View Log