URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [config/] [pdp11/] [pdp11.md] - Rev 282
Compare with Previous | Blame | View Log
;;- Machine description for the pdp11 for GNU C compiler;; Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2004, 2005;; 2007, 2008 Free Software Foundation, Inc.;; Contributed by Michael K. Gschwind (mike@vlsivie.tuwien.ac.at).;; This file is part of GCC.;; GCC is free software; you can redistribute it and/or modify;; it under the terms of the GNU General Public License as published by;; the Free Software Foundation; either version 3, or (at your option);; any later version.;; GCC is distributed in the hope that it will be useful,;; but WITHOUT ANY WARRANTY; without even the implied warranty of;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the;; GNU General Public License for more details.;; You should have received a copy of the GNU General Public License;; along with GCC; see the file COPYING3. If not see;; <http://www.gnu.org/licenses/>.;; Match CONST_DOUBLE zero for tstd/tstf.(define_predicate "register_or_const0_operand"(ior (match_operand 0 "register_operand")(match_test "op == CONST0_RTX (GET_MODE (op))")));; HI is 16 bit;; QI is 8 bit;;- See file "rtl.def" for documentation on define_insn, match_*, et. al.;;- cpp macro #define NOTICE_UPDATE_CC in file tm.h handles condition code;;- updates for most instructions.;;- Operand classes for the register allocator:;; Compare instructions.;; currently we only support df floats, which saves us quite some;; hassle switching the FP mode!;; we assume that CPU is always in long float mode, and;; 16 bit integer mode - currently, the prologue for main does this,;; but maybe we should just set up a NEW crt0 properly,;; -- and what about signal handling code?;; (we don't even let sf floats in the register file, so;; we only should have to worry about truncating and widening;; when going to memory);; abort() call by g++ - must define libfunc for cmp_optab;; and ucmp_optab for mode SImode, because we don't have that!!!;; - yet since no libfunc is there, we abort ();; The only thing that remains to be done then is output;; the floats in a way the assembler can handle it (and;; if you're really into it, use a PDP11 float emulation;; library to do floating point constant folding - but;; I guess you'll get reasonable results even when not;; doing this);; the last thing to do is fix the UPDATE_CC macro to check;; for floating point condition codes, and set cc_status;; properly, also setting the CC_IN_FCCR flag.;; define attributes;; currently type is only fpu or arith or unknown, maybe branch later ?;; default is arith(define_attr "type" "unknown,arith,fp" (const_string "arith"));; length default is 1 word each(define_attr "length" "" (const_int 1));; a user's asm statement(define_asm_attributes[(set_attr "type" "unknown"); all bets are off how long it is - make it 256, forces long jumps; whenever jumping around it !!!(set_attr "length" "256")]);; define function units;; arithmetic - values here immediately when next insn issued;; or does it mean the number of cycles after this insn was issued?;; how do I say that fpu insns use cpu also? (pre-interaction phase);(define_function_unit "cpu" 1 1 (eq_attr "type" "arith") 0 0);(define_function_unit "fpu" 1 1 (eq_attr "type" "fp") 0 0);; compare(define_insn "*cmpdf"[(set (cc0)(compare (match_operand:DF 0 "general_operand" "fR,fR,Q,Q,F")(match_operand:DF 1 "register_or_const0_operand" "G,a,G,a,a")))]"TARGET_FPU""*{cc_status.flags = CC_IN_FPU;if (which_alternative == 0 || which_alternative == 2)return \"{tstd|tstf} %0, %1\;cfcc\";elsereturn \"{cmpd|cmpf} %0, %1\;cfcc\";}"[(set_attr "length" "2,2,3,3,6")])(define_insn "*cmphi"[(set (cc0)(compare (match_operand:HI 0 "general_operand" "rR,rR,rR,Q,Qi,Qi")(match_operand:HI 1 "general_operand" "N,rR,Qi,N,rR,Qi")))]"""@tst %0cmp %0,%1cmp %0,%1tst %0cmp %0,%1cmp %0,%1"[(set_attr "length" "1,1,2,2,2,3")])(define_insn "*cmpqi"[(set (cc0)(compare (match_operand:QI 0 "general_operand" "rR,rR,rR,Q,Qi,Qi")(match_operand:QI 1 "general_operand" "N,rR,Qi,N,rR,Qi")))]"""@tstb %0cmpb %0,%1cmpb %0,%1tstb %0cmpb %0,%1cmpb %0,%1"[(set_attr "length" "1,1,2,2,2,3")]);; sob instruction - we need an assembler which can make this instruction;; valid under _all_ circumstances!(define_insn ""[(set (pc)(if_then_else(ne (plus:HI (match_operand:HI 0 "register_operand" "+r")(const_int -1))(const_int 0))(label_ref (match_operand 1 "" ""))(pc)))(set (match_dup 0)(plus:HI (match_dup 0)(const_int -1)))]"TARGET_40_PLUS""*{static int labelcount = 0;static char buf[1000];if (get_attr_length (insn) == 1)return \"sob %0, %l1\";/* emulate sob */output_asm_insn (\"dec %0\", operands);sprintf (buf, \"bge LONG_SOB%d\", labelcount);output_asm_insn (buf, NULL);output_asm_insn (\"jmp %l1\", operands);sprintf (buf, \"LONG_SOB%d:\", labelcount++);output_asm_insn (buf, NULL);return \"\";}"[(set (attr "length") (if_then_else (ior (le (minus (match_dup 0)(pc))(const_int -256))(ge (minus (match_dup 0)(pc))(const_int 0)))(const_int 4)(const_int 1)))]);; These control RTL generation for conditional jump insns;; and match them for register allocation.(define_expand "cbranchdf4"[(set (cc0)(compare (match_operand:DF 1 "general_operand")(match_operand:DF 2 "general_operand")))(set (pc)(if_then_else (match_operator 0 "ordered_comparison_operator"[(cc0) (const_int 0)])(label_ref (match_operand 3 "" ""))(pc)))]"""")(define_expand "cbranchhi4"[(set (cc0)(compare (match_operand:HI 1 "general_operand")(match_operand:HI 2 "general_operand")))(set (pc)(if_then_else (match_operator 0 "ordered_comparison_operator"[(cc0) (const_int 0)])(label_ref (match_operand 3 "" ""))(pc)))]"""")(define_expand "cbranchqi4"[(set (cc0)(compare (match_operand:QI 1 "general_operand")(match_operand:QI 2 "general_operand")))(set (pc)(if_then_else (match_operator 0 "ordered_comparison_operator"[(cc0) (const_int 0)])(label_ref (match_operand 3 "" ""))(pc)))]"""");; problem with too short jump distance! we need an assembler which can;; make this valid for all jump distances!;; e.g. gas!;; these must be changed to check for CC_IN_FCCR if float is to be;; enabled(define_insn "*branch"[(set (pc)(if_then_else (match_operator 0 "ordered_comparison_operator"[(cc0) (const_int 0)])(label_ref (match_operand 1 "" ""))(pc)))]"""* return output_jump(GET_CODE (operands[0]), 0, get_attr_length(insn));"[(set (attr "length") (if_then_else (ior (le (minus (match_dup 1)(pc))(const_int -128))(ge (minus (match_dup 1)(pc))(const_int 128)))(const_int 3)(const_int 1)))]);; These match inverted jump insns for register allocation.(define_insn "*branch_inverted"[(set (pc)(if_then_else (match_operator 0 "ordered_comparison_operator"[(cc0) (const_int 0)])(pc)(label_ref (match_operand 1 "" ""))))]"""* return output_jump(GET_CODE (operands[0]), 1, get_attr_length(insn));"[(set (attr "length") (if_then_else (ior (le (minus (match_dup 1)(pc))(const_int -128))(ge (minus (match_dup 1)(pc))(const_int 128)))(const_int 3)(const_int 1)))]);; Move instructions(define_insn "movdi"[(set (match_operand:DI 0 "general_operand" "=g,rm,o")(match_operand:DI 1 "general_operand" "m,r,a"))]"""* return output_move_quad (operands);";; what's the mose expensive code - say twice movsi = 16[(set_attr "length" "16,16,16")])(define_insn "movsi"[(set (match_operand:SI 0 "general_operand" "=r,r,r,rm,m")(match_operand:SI 1 "general_operand" "rN,IJ,K,m,r"))]"""* return output_move_double (operands);";; what's the most expensive code ? - I think 8!;; we could split it up and make several sub-cases...[(set_attr "length" "2,3,4,8,8")])(define_insn "movhi"[(set (match_operand:HI 0 "general_operand" "=rR,rR,Q,Q")(match_operand:HI 1 "general_operand" "rRN,Qi,rRN,Qi"))]"""*{if (operands[1] == const0_rtx)return \"clr %0\";return \"mov %1, %0\";}"[(set_attr "length" "1,2,2,3")])(define_insn "movqi"[(set (match_operand:QI 0 "nonimmediate_operand" "=g")(match_operand:QI 1 "general_operand" "g"))]"""*{if (operands[1] == const0_rtx)return \"clrb %0\";return \"movb %1, %0\";}"[(set_attr "length" "1")]);; do we have to supply all these moves? e.g. to;; NO_LOAD_FPU_REGs ?(define_insn "movdf"[(set (match_operand:DF 0 "general_operand" "=a,fR,a,Q,m")(match_operand:DF 1 "general_operand" "fFR,a,Q,a,m"))]"""* if (which_alternative ==0)return \"ldd %1, %0\";else if (which_alternative == 1)return \"std %1, %0\";elsereturn output_move_quad (operands); ";; just a guess..[(set_attr "length" "1,1,5,5,16")])(define_insn "movsf"[(set (match_operand:SF 0 "general_operand" "=g,r,g")(match_operand:SF 1 "general_operand" "r,rmF,g"))]"TARGET_FPU""* return output_move_double (operands);"[(set_attr "length" "8,8,8")]);; maybe fiddle a bit with move_ratio, then;; let constraints only accept a register ...(define_expand "movmemhi"[(parallel [(set (match_operand:BLK 0 "general_operand" "=g,g")(match_operand:BLK 1 "general_operand" "g,g"))(use (match_operand:HI 2 "arith_operand" "n,&mr"))(use (match_operand:HI 3 "immediate_operand" "i,i"))(clobber (match_scratch:HI 4 "=&r,X"))(clobber (match_dup 5))(clobber (match_dup 6))(clobber (match_dup 2))])]"(TARGET_BCOPY_BUILTIN)""{operands[0]= replace_equiv_address (operands[0],copy_to_mode_reg (Pmode, XEXP (operands[0], 0)));operands[1]= replace_equiv_address (operands[1],copy_to_mode_reg (Pmode, XEXP (operands[1], 0)));operands[5] = XEXP (operands[0], 0);operands[6] = XEXP (operands[1], 0);}")(define_insn "" ; "movmemhi"[(set (mem:BLK (match_operand:HI 0 "general_operand" "=r,r"))(mem:BLK (match_operand:HI 1 "general_operand" "r,r")))(use (match_operand:HI 2 "arith_operand" "n,&r"))(use (match_operand:HI 3 "immediate_operand" "i,i"))(clobber (match_scratch:HI 4 "=&r,X"))(clobber (match_dup 0))(clobber (match_dup 1))(clobber (match_dup 2))]"(TARGET_BCOPY_BUILTIN)""* return output_block_move (operands);";;; just a guess[(set_attr "length" "40")]);;- truncation instructions(define_insn "truncdfsf2"[(set (match_operand:SF 0 "general_operand" "=r,R,Q")(float_truncate:SF (match_operand:DF 1 "register_operand" "a,a,a")))]"TARGET_FPU""* if (which_alternative ==0){output_asm_insn(\"{stcdf|movfo} %1, -(sp)\", operands);output_asm_insn(\"mov (sp)+, %0\", operands);operands[0] = gen_rtx_REG (HImode, REGNO (operands[0])+1);output_asm_insn(\"mov (sp)+, %0\", operands);return \"\";}else if (which_alternative == 1)return \"{stcdf|movfo} %1, %0\";elsereturn \"{stcdf|movfo} %1, %0\";"[(set_attr "length" "3,1,2")])(define_expand "truncsihi2"[(set (match_operand:HI 0 "general_operand" "=g")(subreg:HI(match_operand:SI 1 "general_operand" "or")0))]"""");;- zero extension instructions(define_insn "zero_extendqihi2"[(set (match_operand:HI 0 "general_operand" "=r")(zero_extend:HI (match_operand:QI 1 "general_operand" "0")))]"""bic $0177400, %0"[(set_attr "length" "2")])(define_expand "zero_extendhisi2"[(set (subreg:HI(match_dup 0)2)(match_operand:HI 1 "register_operand" "r"))(set (subreg:HI(match_operand:SI 0 "register_operand" "=r")0)(const_int 0))]"""/* operands[1] = make_safe_from (operands[1], operands[0]); */");;- sign extension instructions(define_insn "extendsfdf2"[(set (match_operand:DF 0 "register_operand" "=a,a,a")(float_extend:DF (match_operand:SF 1 "general_operand" "r,R,Q")))]"TARGET_FPU""@mov %1, -(sp)\;{ldcfd|movof} (sp)+,%0{ldcfd|movof} %1, %0{ldcfd|movof} %1, %0"[(set_attr "length" "2,1,2")]);; does movb sign extend in register-to-register move?(define_insn "extendqihi2"[(set (match_operand:HI 0 "register_operand" "=r,r")(sign_extend:HI (match_operand:QI 1 "general_operand" "rR,Q")))]"""movb %1, %0"[(set_attr "length" "1,2")])(define_insn "extendqisi2"[(set (match_operand:SI 0 "register_operand" "=r,r")(sign_extend:SI (match_operand:QI 1 "general_operand" "rR,Q")))]"TARGET_40_PLUS""*{rtx latehalf[2];/* make register pair available */latehalf[0] = operands[0];operands[0] = gen_rtx_REG (HImode, REGNO (operands[0])+ 1);output_asm_insn(\"movb %1, %0\", operands);output_asm_insn(\"sxt %0\", latehalf);return \"\";}"[(set_attr "length" "2,3")]);; maybe we have to use define_expand to say that we have the instruction,;; unconditionally, and then match dependent on CPU type:(define_expand "extendhisi2"[(set (match_operand:SI 0 "general_operand" "=g")(sign_extend:SI (match_operand:HI 1 "general_operand" "g")))]"""")(define_insn "" ; "extendhisi2"[(set (match_operand:SI 0 "general_operand" "=o,<,r")(sign_extend:SI (match_operand:HI 1 "general_operand" "g,g,g")))]"TARGET_40_PLUS""*{rtx latehalf[2];/* we don't want to mess with auto increment */switch (which_alternative){case 0:latehalf[0] = operands[0];operands[0] = adjust_address(operands[0], HImode, 2);output_asm_insn(\"mov %1, %0\", operands);output_asm_insn(\"sxt %0\", latehalf);return \"\";case 1:/* - auto-decrement - right direction ;-) */output_asm_insn(\"mov %1, %0\", operands);output_asm_insn(\"sxt %0\", operands);return \"\";case 2:/* make register pair available */latehalf[0] = operands[0];operands[0] = gen_rtx_REG (HImode, REGNO (operands[0]) + 1);output_asm_insn(\"mov %1, %0\", operands);output_asm_insn(\"sxt %0\", latehalf);return \"\";default:gcc_unreachable ();}}"[(set_attr "length" "5,3,3")])(define_insn ""[(set (match_operand:SI 0 "register_operand" "=r")(sign_extend:SI (match_operand:HI 1 "general_operand" "0")))]"(! TARGET_40_PLUS)""*{static int count = 0;char buf[100];rtx lateoperands[2];lateoperands[0] = operands[0];operands[0] = gen_rtx_REG (HImode, REGNO (operands[0]) + 1);output_asm_insn(\"tst %0\", operands);sprintf(buf, \"bge extendhisi%d\", count);output_asm_insn(buf, NULL);output_asm_insn(\"mov -1, %0\", lateoperands);sprintf(buf, \"bne extendhisi%d\", count+1);output_asm_insn(buf, NULL);sprintf(buf, \"\\nextendhisi%d:\", count);output_asm_insn(buf, NULL);output_asm_insn(\"clr %0\", lateoperands);sprintf(buf, \"\\nextendhisi%d:\", count+1);output_asm_insn(buf, NULL);count += 2;return \"\";}"[(set_attr "length" "6")]);; make float to int and vice versa;; using the cc_status.flag field we could probably cut down;; on seti and setl;; assume that we are normally in double and integer mode -;; what do pdp library routines do to fpu mode ?(define_insn "floatsidf2"[(set (match_operand:DF 0 "register_operand" "=a,a,a")(float:DF (match_operand:SI 1 "general_operand" "r,R,Q")))]"TARGET_FPU""* if (which_alternative ==0){rtx latehalf[2];latehalf[0] = NULL;latehalf[1] = gen_rtx_REG (HImode, REGNO (operands[1]) + 1);output_asm_insn(\"mov %1, -(sp)\", latehalf);output_asm_insn(\"mov %1, -(sp)\", operands);output_asm_insn(\"setl\", operands);output_asm_insn(\"{ldcld|movif} (sp)+, %0\", operands);output_asm_insn(\"seti\", operands);return \"\";}else if (which_alternative == 1)return \"setl\;{ldcld|movif} %1, %0\;seti\";elsereturn \"setl\;{ldcld|movif} %1, %0\;seti\";"[(set_attr "length" "5,3,4")])(define_insn "floathidf2"[(set (match_operand:DF 0 "register_operand" "=a,a")(float:DF (match_operand:HI 1 "general_operand" "rR,Qi")))]"TARGET_FPU""{ldcid|movif} %1, %0"[(set_attr "length" "1,2")]);; cut float to int(define_insn "fix_truncdfsi2"[(set (match_operand:SI 0 "general_operand" "=r,R,Q")(fix:SI (fix:DF (match_operand:DF 1 "register_operand" "a,a,a"))))]"TARGET_FPU""* if (which_alternative ==0){output_asm_insn(\"setl\", operands);output_asm_insn(\"{stcdl|movfi} %1, -(sp)\", operands);output_asm_insn(\"seti\", operands);output_asm_insn(\"mov (sp)+, %0\", operands);operands[0] = gen_rtx_REG (HImode, REGNO (operands[0]) + 1);output_asm_insn(\"mov (sp)+, %0\", operands);return \"\";}else if (which_alternative == 1)return \"setl\;{stcdl|movfi} %1, %0\;seti\";elsereturn \"setl\;{stcdl|movfi} %1, %0\;seti\";"[(set_attr "length" "5,3,4")])(define_insn "fix_truncdfhi2"[(set (match_operand:HI 0 "general_operand" "=rR,Q")(fix:HI (fix:DF (match_operand:DF 1 "register_operand" "a,a"))))]"TARGET_FPU""{stcdi|movfi} %1, %0"[(set_attr "length" "1,2")]);;- arithmetic instructions;;- add instructions(define_insn "adddf3"[(set (match_operand:DF 0 "register_operand" "=a,a,a")(plus:DF (match_operand:DF 1 "register_operand" "%0,0,0")(match_operand:DF 2 "general_operand" "fR,Q,F")))]"TARGET_FPU""{addd|addf} %2, %0"[(set_attr "length" "1,2,5")])(define_insn "addsi3"[(set (match_operand:SI 0 "general_operand" "=r,r,o,o,r,r,r,o,o,o")(plus:SI (match_operand:SI 1 "general_operand" "%0,0,0,0,0,0,0,0,0,0")(match_operand:SI 2 "general_operand" "r,o,r,o,I,J,K,I,J,K")))]"""*{ /* Here we trust that operands don't overlapor is lateoperands the low word?? - looks like it! */rtx lateoperands[3];lateoperands[0] = operands[0];if (REG_P (operands[0]))operands[0] = gen_rtx_REG (HImode, REGNO (operands[0]) + 1);elseoperands[0] = adjust_address (operands[0], HImode, 2);if (! CONSTANT_P(operands[2])){lateoperands[2] = operands[2];if (REG_P (operands[2]))operands[2] = gen_rtx_REG (HImode, REGNO (operands[2]) + 1);elseoperands[2] = adjust_address (operands[2], HImode, 2);output_asm_insn (\"add %2, %0\", operands);output_asm_insn (\"adc %0\", lateoperands);output_asm_insn (\"add %2, %0\", lateoperands);return \"\";}lateoperands[2] = GEN_INT ((INTVAL (operands[2]) >> 16) & 0xffff);operands[2] = GEN_INT (INTVAL (operands[2]) & 0xffff);if (INTVAL(operands[2])){output_asm_insn (\"add %2, %0\", operands);output_asm_insn (\"adc %0\", lateoperands);}if (INTVAL(lateoperands[2]))output_asm_insn (\"add %2, %0\", lateoperands);return \"\";}"[(set_attr "length" "3,5,6,8,3,1,5,5,3,8")])(define_insn "addhi3"[(set (match_operand:HI 0 "general_operand" "=rR,rR,Q,Q")(plus:HI (match_operand:HI 1 "general_operand" "%0,0,0,0")(match_operand:HI 2 "general_operand" "rRLM,Qi,rRLM,Qi")))]"""*{if (GET_CODE (operands[2]) == CONST_INT){if (INTVAL(operands[2]) == 1)return \"inc %0\";else if (INTVAL(operands[2]) == -1)return \"dec %0\";}return \"add %2, %0\";}"[(set_attr "length" "1,2,2,3")])(define_insn "addqi3"[(set (match_operand:QI 0 "general_operand" "=rR,rR,Q,Q")(plus:QI (match_operand:QI 1 "general_operand" "%0,0,0,0")(match_operand:QI 2 "general_operand" "rRLM,Qi,rRLM,Qi")))]"""*{if (GET_CODE (operands[2]) == CONST_INT){if (INTVAL(operands[2]) == 1)return \"incb %0\";else if (INTVAL(operands[2]) == -1)return \"decb %0\";}return \"add %2, %0\";}"[(set_attr "length" "1,2,2,3")]);;- subtract instructions;; we don't have to care for constant second;; args, since they are canonical plus:xx now!;; also for minus:DF ??(define_insn "subdf3"[(set (match_operand:DF 0 "register_operand" "=a,a")(minus:DF (match_operand:DF 1 "register_operand" "0,0")(match_operand:DF 2 "general_operand" "fR,Q")))]"TARGET_FPU""{subd|subf} %2, %0"[(set_attr "length" "1,2")])(define_insn "subsi3"[(set (match_operand:SI 0 "general_operand" "=r,r,o,o")(minus:SI (match_operand:SI 1 "general_operand" "0,0,0,0")(match_operand:SI 2 "general_operand" "r,o,r,o")))]"""*{ /* Here we trust that operands don't overlapor is lateoperands the low word?? - looks like it! */rtx lateoperands[3];lateoperands[0] = operands[0];if (REG_P (operands[0]))operands[0] = gen_rtx_REG (HImode, REGNO (operands[0]) + 1);elseoperands[0] = adjust_address (operands[0], HImode, 2);lateoperands[2] = operands[2];if (REG_P (operands[2]))operands[2] = gen_rtx_REG (HImode, REGNO (operands[2]) + 1);elseoperands[2] = adjust_address (operands[2], HImode, 2);output_asm_insn (\"sub %2, %0\", operands);output_asm_insn (\"sbc %0\", lateoperands);output_asm_insn (\"sub %2, %0\", lateoperands);return \"\";}";; offsettable memory addresses always are expensive!!![(set_attr "length" "3,5,6,8")])(define_insn "subhi3"[(set (match_operand:HI 0 "general_operand" "=rR,rR,Q,Q")(minus:HI (match_operand:HI 1 "general_operand" "0,0,0,0")(match_operand:HI 2 "general_operand" "rR,Qi,rR,Qi")))]"""*{gcc_assert (GET_CODE (operands[2]) != CONST_INT);return \"sub %2, %0\";}"[(set_attr "length" "1,2,2,3")])(define_insn "subqi3"[(set (match_operand:QI 0 "general_operand" "=rR,rR,Q,Q")(minus:QI (match_operand:QI 1 "general_operand" "0,0,0,0")(match_operand:QI 2 "general_operand" "rR,Qi,rR,Qi")))]"""*{gcc_assert (GET_CODE (operands[2]) != CONST_INT);return \"sub %2, %0\";}"[(set_attr "length" "1,2,2,3")]);;;;- and instructions;; Bit-and on the pdp (like on the VAX) is done with a clear-bits insn.(define_insn "andsi3"[(set (match_operand:SI 0 "general_operand" "=r,r,o,o,r,r,r,o,o,o")(and:SI (match_operand:SI 1 "general_operand" "%0,0,0,0,0,0,0,0,0,0")(not:SI (match_operand:SI 2 "general_operand" "r,o,r,o,I,J,K,I,J,K"))))]"""*{ /* Here we trust that operands don't overlapor is lateoperands the low word?? - looks like it! */rtx lateoperands[3];lateoperands[0] = operands[0];if (REG_P (operands[0]))operands[0] = gen_rtx_REG (HImode, REGNO (operands[0]) + 1);elseoperands[0] = adjust_address (operands[0], HImode, 2);if (! CONSTANT_P(operands[2])){lateoperands[2] = operands[2];if (REG_P (operands[2]))operands[2] = gen_rtx_REG (HImode, REGNO (operands[2]) + 1);elseoperands[2] = adjust_address (operands[2], HImode, 2);output_asm_insn (\"bic %2, %0\", operands);output_asm_insn (\"bic %2, %0\", lateoperands);return \"\";}lateoperands[2] = GEN_INT ((INTVAL (operands[2]) >> 16) & 0xffff);operands[2] = GEN_INT (INTVAL (operands[2]) & 0xffff);/* these have different lengths, so we should havedifferent constraints! */if (INTVAL(operands[2]))output_asm_insn (\"bic %2, %0\", operands);if (INTVAL(lateoperands[2]))output_asm_insn (\"bic %2, %0\", lateoperands);return \"\";}"[(set_attr "length" "2,4,4,6,2,2,4,3,3,6")])(define_insn "andhi3"[(set (match_operand:HI 0 "general_operand" "=rR,rR,Q,Q")(and:HI (match_operand:HI 1 "general_operand" "0,0,0,0")(not:HI (match_operand:HI 2 "general_operand" "rR,Qi,rR,Qi"))))]"""bic %2, %0"[(set_attr "length" "1,2,2,3")])(define_insn "andqi3"[(set (match_operand:QI 0 "general_operand" "=rR,rR,Q,Q")(and:QI (match_operand:QI 1 "general_operand" "0,0,0,0")(not:QI (match_operand:QI 2 "general_operand" "rR,Qi,rR,Qi"))))]"""bicb %2, %0"[(set_attr "length" "1,2,2,3")]);;- Bit set (inclusive or) instructions(define_insn "iorsi3"[(set (match_operand:SI 0 "general_operand" "=r,r,o,o,r,r,r,o,o,o")(ior:SI (match_operand:SI 1 "general_operand" "%0,0,0,0,0,0,0,0,0,0")(match_operand:SI 2 "general_operand" "r,o,r,o,I,J,K,I,J,K")))]"""*{ /* Here we trust that operands don't overlapor is lateoperands the low word?? - looks like it! */rtx lateoperands[3];lateoperands[0] = operands[0];if (REG_P (operands[0]))operands[0] = gen_rtx_REG (HImode, REGNO (operands[0]) + 1);elseoperands[0] = adjust_address (operands[0], HImode, 2);if (! CONSTANT_P(operands[2])){lateoperands[2] = operands[2];if (REG_P (operands[2]))operands[2] = gen_rtx_REG (HImode, REGNO (operands[2]) + 1);elseoperands[2] = adjust_address (operands[2], HImode, 2);output_asm_insn (\"bis %2, %0\", operands);output_asm_insn (\"bis %2, %0\", lateoperands);return \"\";}lateoperands[2] = GEN_INT ((INTVAL (operands[2]) >> 16) & 0xffff);operands[2] = GEN_INT (INTVAL (operands[2]) & 0xffff);/* these have different lengths, so we should havedifferent constraints! */if (INTVAL(operands[2]))output_asm_insn (\"bis %2, %0\", operands);if (INTVAL(lateoperands[2]))output_asm_insn (\"bis %2, %0\", lateoperands);return \"\";}"[(set_attr "length" "2,4,4,6,2,2,4,3,3,6")])(define_insn "iorhi3"[(set (match_operand:HI 0 "general_operand" "=rR,rR,Q,Q")(ior:HI (match_operand:HI 1 "general_operand" "%0,0,0,0")(match_operand:HI 2 "general_operand" "rR,Qi,rR,Qi")))]"""bis %2, %0"[(set_attr "length" "1,2,2,3")])(define_insn "iorqi3"[(set (match_operand:QI 0 "general_operand" "=rR,rR,Q,Q")(ior:QI (match_operand:QI 1 "general_operand" "%0,0,0,0")(match_operand:QI 2 "general_operand" "rR,Qi,rR,Qi")))]"""bisb %2, %0");;- xor instructions(define_insn "xorsi3"[(set (match_operand:SI 0 "register_operand" "=r")(xor:SI (match_operand:SI 1 "register_operand" "%0")(match_operand:SI 2 "arith_operand" "r")))]"TARGET_40_PLUS""*{ /* Here we trust that operands don't overlap */rtx lateoperands[3];lateoperands[0] = operands[0];operands[0] = gen_rtx_REG (HImode, REGNO (operands[0]) + 1);if (REG_P(operands[2])){lateoperands[2] = operands[2];operands[2] = gen_rtx_REG (HImode, REGNO (operands[2]) + 1);output_asm_insn (\"xor %2, %0\", operands);output_asm_insn (\"xor %2, %0\", lateoperands);return \"\";}}"[(set_attr "length" "2")])(define_insn "xorhi3"[(set (match_operand:HI 0 "general_operand" "=rR,Q")(xor:HI (match_operand:HI 1 "general_operand" "%0,0")(match_operand:HI 2 "register_operand" "r,r")))]"TARGET_40_PLUS""xor %2, %0"[(set_attr "length" "1,2")]);;- one complement instructions(define_insn "one_cmplhi2"[(set (match_operand:HI 0 "general_operand" "=rR,Q")(not:HI (match_operand:HI 1 "general_operand" "0,0")))]"""com %0"[(set_attr "length" "1,2")])(define_insn "one_cmplqi2"[(set (match_operand:QI 0 "general_operand" "=rR,rR")(not:QI (match_operand:QI 1 "general_operand" "0,g")))]"""@comb %0movb %1, %0\; comb %0"[(set_attr "length" "1,2")]);;- arithmetic shift instructions(define_insn "ashlsi3"[(set (match_operand:SI 0 "register_operand" "=r,r")(ashift:SI (match_operand:SI 1 "register_operand" "0,0")(match_operand:HI 2 "general_operand" "rR,Qi")))]"TARGET_45""ashc %2,%0"[(set_attr "length" "1,2")]);; Arithmetic right shift on the pdp works by negating the shift count.(define_expand "ashrsi3"[(set (match_operand:SI 0 "register_operand" "=r")(ashift:SI (match_operand:SI 1 "register_operand" "0")(match_operand:HI 2 "general_operand" "g")))]"""{operands[2] = negate_rtx (HImode, operands[2]);}");; define asl aslb asr asrb - ashc missing!;; asl(define_insn ""[(set (match_operand:HI 0 "general_operand" "=rR,Q")(ashift:HI (match_operand:HI 1 "general_operand" "0,0")(const_int 1)))]"""asl %0"[(set_attr "length" "1,2")]);; and another possibility for asr is << -1;; might cause problems since -1 can also be encoded as 65535!;; not in gcc2 ???;; asr(define_insn ""[(set (match_operand:HI 0 "general_operand" "=rR,Q")(ashift:HI (match_operand:HI 1 "general_operand" "0,0")(const_int -1)))]"""asr %0"[(set_attr "length" "1,2")]);; lsr(define_insn ""[(set (match_operand:HI 0 "general_operand" "=rR,Q")(lshiftrt:HI (match_operand:HI 1 "general_operand" "0,0")(const_int 1)))]"""clc\;ror %0"[(set_attr "length" "1,2")])(define_insn "lshrsi3"[(set (match_operand:SI 0 "register_operand" "=r")(lshiftrt:SI (match_operand:SI 1 "general_operand" "0")(const_int 1)))]""{rtx lateoperands[2];lateoperands[0] = operands[0];operands[0] = gen_rtx_REG (HImode, REGNO (operands[0]) + 1);lateoperands[1] = operands[1];operands[1] = gen_rtx_REG (HImode, REGNO (operands[1]) + 1);output_asm_insn (\"clc\", operands);output_asm_insn (\"ror %0\", lateoperands);output_asm_insn (\"ror %0\", operands);return \"\";}[(set_attr "length" "5")]);; shift is by arbitrary count is expensive,;; shift by one cheap - so let's do that, if;; space doesn't matter(define_insn ""[(set (match_operand:HI 0 "general_operand" "=r")(ashift:HI (match_operand:HI 1 "general_operand" "0")(match_operand:HI 2 "expand_shift_operand" "O")))]"! optimize_size""*{register int i;for (i = 1; i <= abs(INTVAL(operands[2])); i++)if (INTVAL(operands[2]) < 0)output_asm_insn(\"asr %0\", operands);elseoutput_asm_insn(\"asl %0\", operands);return \"\";}";; longest is 4[(set (attr "length") (const_int 4))]);; aslb(define_insn ""[(set (match_operand:QI 0 "general_operand" "=r,o")(ashift:QI (match_operand:QI 1 "general_operand" "0,0")(match_operand:HI 2 "const_immediate_operand" "n,n")))]"""*{ /* allowing predec or post_inc is possible, but hairy! */int i, cnt;cnt = INTVAL(operands[2]) & 0x0007;for (i=0 ; i < cnt ; i++)output_asm_insn(\"aslb %0\", operands);return \"\";}";; set attribute length ( match_dup 2 & 7 ) *(1 or 2) !!![(set_attr_alternative "length"[(const_int 7)(const_int 14)])]);;; asr;(define_insn ""; [(set (match_operand:HI 0 "general_operand" "=rR,Q"); (ashiftrt:HI (match_operand:HI 1 "general_operand" "0,0"); (const_int 1)))]; ""; "asr %0"; [(set_attr "length" "1,2")]);; asrb(define_insn ""[(set (match_operand:QI 0 "general_operand" "=r,o")(ashiftrt:QI (match_operand:QI 1 "general_operand" "0,0")(match_operand:HI 2 "const_immediate_operand" "n,n")))]"""*{ /* allowing predec or post_inc is possible, but hairy! */int i, cnt;cnt = INTVAL(operands[2]) & 0x0007;for (i=0 ; i < cnt ; i++)output_asm_insn(\"asrb %0\", operands);return \"\";}"[(set_attr_alternative "length"[(const_int 7)(const_int 14)])]);; the following is invalid - too complex!!! - just say 14 !!!; [(set (attr "length") (plus (and (match_dup 2); (const_int 7)); (and (match_dup 2); (const_int 7))))]);; can we get +-1 in the next pattern? should;; have been caught by previous patterns!(define_insn "ashlhi3"[(set (match_operand:HI 0 "register_operand" "=r,r")(ashift:HI (match_operand:HI 1 "register_operand" "0,0")(match_operand:HI 2 "general_operand" "rR,Qi")))]"""*{if (GET_CODE(operands[2]) == CONST_INT){if (INTVAL(operands[2]) == 1)return \"asl %0\";else if (INTVAL(operands[2]) == -1)return \"asr %0\";}return \"ash %2,%0\";}"[(set_attr "length" "1,2")]);; Arithmetic right shift on the pdp works by negating the shift count.(define_expand "ashrhi3"[(set (match_operand:HI 0 "register_operand" "=r")(ashift:HI (match_operand:HI 1 "register_operand" "0")(match_operand:HI 2 "general_operand" "g")))]"""{operands[2] = negate_rtx (HImode, operands[2]);}");;;;- logical shift instructions;;(define_insn "lshrsi3";; [(set (match_operand:HI 0 "register_operand" "=r");; (lshiftrt:HI (match_operand:HI 1 "register_operand" "0");; (match_operand:HI 2 "arith_operand" "rI")))];; "";; "srl %0,%2");; absolute(define_insn "absdf2"[(set (match_operand:DF 0 "general_operand" "=fR,Q")(abs:DF (match_operand:DF 1 "general_operand" "0,0")))]"TARGET_FPU""{absd|absf} %0"[(set_attr "length" "1,2")])(define_insn "abshi2"[(set (match_operand:HI 0 "general_operand" "=r,o")(abs:HI (match_operand:HI 1 "general_operand" "0,0")))]"TARGET_ABSHI_BUILTIN""*{static int count = 0;char buf[200];output_asm_insn(\"tst %0\", operands);sprintf(buf, \"bge abshi%d\", count);output_asm_insn(buf, NULL);output_asm_insn(\"neg %0\", operands);sprintf(buf, \"\\nabshi%d:\", count++);output_asm_insn(buf, NULL);return \"\";}"[(set_attr "length" "3,5")]);; define expand abshi - is much better !!! - but;; will it be optimized into an abshi2 ?;; it will leave better code, because the tsthi might be;; optimized away!!; -- just a thought - don't have time to check;;(define_expand "abshi2"; [(match_operand:HI 0 "general_operand" ""); (match_operand:HI 1 "general_operand" "")]; ""; ";{; rtx label = gen_label_rtx ();;; /* do I need this? */; do_pending_stack_adjust ();;; emit_move_insn (operands[0], operands[1]);;; emit_insn (gen_tsthi (operands[0]));; emit_insn (gen_bge (label1));;; emit_insn (gen_neghi(operands[0], operands[0]);; emit_barrier ();;; emit_label (label);;; /* allow REG_NOTES to be set on last insn (labels don't have enough; fields, and can't be used for REG_NOTES anyway). */; emit_use (stack_pointer_rtx);; DONE;;}");; negate insns(define_insn "negdf2"[(set (match_operand:DF 0 "general_operand" "=fR,Q")(neg:DF (match_operand:DF 1 "register_operand" "0,0")))]"TARGET_FPU""{negd|negf} %0"[(set_attr "length" "1,2")])(define_insn "negsi2"[(set (match_operand:SI 0 "register_operand" "=r")(neg:SI (match_operand:SI 1 "general_operand" "0")))]""{rtx lateoperands[2];lateoperands[0] = operands[0];operands[0] = gen_rtx_REG (HImode, REGNO (operands[0]) + 1);lateoperands[1] = operands[1];operands[1] = gen_rtx_REG (HImode, REGNO (operands[1]) + 1);output_asm_insn (\"com %0\", operands);output_asm_insn (\"com %0\", lateoperands);output_asm_insn (\"inc %0\", operands);output_asm_insn (\"adc %0\", lateoperands);return \"\";}[(set_attr "length" "5")])(define_insn "neghi2"[(set (match_operand:HI 0 "general_operand" "=rR,Q")(neg:HI (match_operand:HI 1 "general_operand" "0,0")))]"""neg %0"[(set_attr "length" "1,2")])(define_insn "negqi2"[(set (match_operand:QI 0 "general_operand" "=rR,Q")(neg:QI (match_operand:QI 1 "general_operand" "0,0")))]"""negb %0"[(set_attr "length" "1,2")]);; Unconditional and other jump instructions(define_insn "jump"[(set (pc)(label_ref (match_operand 0 "" "")))]"""jmp %l0"[(set_attr "length" "2")])(define_insn ""[(set (pc)(label_ref (match_operand 0 "" "")))(clobber (const_int 1))]"""jmp %l0"[(set_attr "length" "2")])(define_insn "tablejump"[(set (pc) (match_operand:HI 0 "general_operand" "rR,Q"))(use (label_ref (match_operand 1 "" "")))]"""jmp %0"[(set_attr "length" "1,2")]);; indirect jump - let's be conservative!;; allow only register_operand, even though we could also;; allow labels etc.(define_insn "indirect_jump"[(set (pc) (match_operand:HI 0 "register_operand" "r"))]"""jmp (%0)");;- jump to subroutine(define_insn "call"[(call (match_operand:HI 0 "general_operand" "rR,Q")(match_operand:HI 1 "general_operand" "g,g"));; (use (reg:HI 0)) what was that ???];;- Don't use operand 1 for most machines."""jsr pc, %0"[(set_attr "length" "1,2")]);;- jump to subroutine(define_insn "call_value"[(set (match_operand 0 "" "")(call (match_operand:HI 1 "general_operand" "rR,Q")(match_operand:HI 2 "general_operand" "g,g")));; (use (reg:HI 0)) - what was that ????];;- Don't use operand 2 for most machines."""jsr pc, %1"[(set_attr "length" "1,2")]);;- nop instruction(define_insn "nop"[(const_int 0)]"""nop");;- multiply(define_insn "muldf3"[(set (match_operand:DF 0 "register_operand" "=a,a,a")(mult:DF (match_operand:DF 1 "register_operand" "%0,0,0")(match_operand:DF 2 "general_operand" "fR,Q,F")))]"TARGET_FPU""{muld|mulf} %2, %0"[(set_attr "length" "1,2,5")]);; 16 bit result multiply:;; currently we multiply only into odd registers, so we don't use two;; registers - but this is a bit inefficient at times. If we define;; a register class for each register, then we can specify properly;; which register need which scratch register ....(define_insn "mulhi3"[(set (match_operand:HI 0 "register_operand" "=d,d") ; multiply regs(mult:HI (match_operand:HI 1 "register_operand" "%0,0")(match_operand:HI 2 "general_operand" "rR,Qi")))]"TARGET_45""mul %2, %0"[(set_attr "length" "1,2")]);; 32 bit result(define_expand "mulhisi3"[(set (match_dup 3)(match_operand:HI 1 "general_operand" "g,g"))(set (match_operand:SI 0 "register_operand" "=r,r") ; even numbered!(mult:SI (truncate:HI(match_dup 0))(match_operand:HI 2 "general_operand" "rR,Qi")))]"TARGET_45""operands[3] = gen_lowpart(HImode, operands[1]);")(define_insn ""[(set (match_operand:SI 0 "register_operand" "=r,r") ; even numbered!(mult:SI (truncate:HI(match_operand:SI 1 "register_operand" "%0,0"))(match_operand:HI 2 "general_operand" "rR,Qi")))]"TARGET_45""mul %2, %0"[(set_attr "length" "1,2")]);(define_insn "mulhisi3"; [(set (match_operand:SI 0 "register_operand" "=r,r") ; even numbered!; (mult:SI (truncate:HI; (match_operand:SI 1 "register_operand" "%0,0")); (match_operand:HI 2 "general_operand" "rR,Qi")))]; "TARGET_45"; "mul %2, %0"; [(set_attr "length" "1,2")]);;- divide(define_insn "divdf3"[(set (match_operand:DF 0 "register_operand" "=a,a,a")(div:DF (match_operand:DF 1 "register_operand" "0,0,0")(match_operand:DF 2 "general_operand" "fR,Q,F")))]"TARGET_FPU""{divd|divf} %2, %0"[(set_attr "length" "1,2,5")])(define_expand "divhi3"[(set (subreg:HI (match_dup 1) 0)(div:HI (match_operand:SI 1 "general_operand" "0")(match_operand:HI 2 "general_operand" "g")))(set (match_operand:HI 0 "general_operand" "=r")(subreg:HI (match_dup 1) 0))]"TARGET_45""")(define_insn ""[(set (subreg:HI (match_operand:SI 0 "general_operand" "=r") 0)(div:HI (match_operand:SI 1 "general_operand" "0")(match_operand:HI 2 "general_operand" "g")))]"TARGET_45""div %2,%0"[(set_attr "length" "2")])(define_expand "modhi3"[(set (subreg:HI (match_dup 1) 2)(mod:HI (match_operand:SI 1 "general_operand" "0")(match_operand:HI 2 "general_operand" "g")))(set (match_operand:HI 0 "general_operand" "=r")(subreg:HI (match_dup 1) 2))]"TARGET_45""")(define_insn ""[(set (subreg:HI (match_operand:SI 0 "general_operand" "=r") 2)(mod:HI (match_operand:SI 1 "general_operand" "0")(match_operand:HI 2 "general_operand" "g")))]"TARGET_45""div %2,%0"[(set_attr "length" "2")]);(define_expand "divmodhi4"; [(parallel [(set (subreg:HI (match_dup 1) 0); (div:HI (match_operand:SI 1 "general_operand" "0"); (match_operand:HI 2 "general_operand" "g"))); (set (subreg:HI (match_dup 1) 2); (mod:HI (match_dup 1); (match_dup 2)))]); (set (match_operand:HI 3 "general_operand" "=r"); (subreg:HI (match_dup 1) 2)); (set (match_operand:HI 0 "general_operand" "=r"); (subreg:HI (match_dup 1) 0))]; "TARGET_45"; "");;(define_insn ""; [(set (subreg:HI (match_operand:SI 0 "general_operand" "=r") 0); (div:HI (match_operand:SI 1 "general_operand" "0"); (match_operand:HI 2 "general_operand" "g"))); (set (subreg:HI (match_dup 0) 2); (mod:HI (match_dup 1); (match_dup 2)))]; "TARGET_45"; "div %2, %0");;; is rotate doing the right thing to be included here ????