URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [config/] [rx/] [rx.md] - Rev 310
Go to most recent revision | Compare with Previous | Blame | View Log
;; Machine Description for Renesas RX processors;; Copyright (C) 2008, 2009, 2010 Free Software Foundation, Inc.;; Contributed by Red Hat.;; This file is part of GCC.;; GCC is free software; you can redistribute it and/or modify;; it under the terms of the GNU General Public License as published by;; the Free Software Foundation; either version 3, or (at your option);; any later version.;; GCC is distributed in the hope that it will be useful,;; but WITHOUT ANY WARRANTY; without even the implied warranty of;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the;; GNU General Public License for more details.;; You should have received a copy of the GNU General Public License;; along with GCC; see the file COPYING3. If not see;; <http://www.gnu.org/licenses/>.;; This code iterator allows all branch instructions to;; be generated from a single define_expand template.(define_code_iterator most_cond [eq ne gt ge lt le gtu geu ltu leuunordered ordered ]);; This code iterator is used for sign- and zero- extensions.(define_mode_iterator small_int_modes [(HI "") (QI "")]);; We do not handle DFmode here because it is either;; the same as SFmode, or if -m64bit-doubles is active;; then all operations on doubles have to be handled by;; library functions.(define_mode_iterator register_modes[(SF "ALLOW_RX_FPU_INSNS") (SI "") (HI "") (QI "")]);; Used to map RX condition names to GCC;; condition names for builtin instructions.(define_code_iterator gcc_conds [eq ne gt ge lt le gtu geu ltu leuunge unlt uneq ltgt])(define_code_attr rx_conds [(eq "eq") (ne "ne") (gt "gt") (ge "ge") (lt "lt")(le "le") (gtu "gtu") (geu "geu") (ltu "ltu")(leu "leu") (unge "pz") (unlt "n") (uneq "o")(ltgt "no")])(define_constants[(SP_REG 0)(CC_REG 16)(UNSPEC_LOW_REG 0)(UNSPEC_HIGH_REG 1)(UNSPEC_RTE 10)(UNSPEC_RTFI 11)(UNSPEC_NAKED 12)(UNSPEC_MOVSTR 20)(UNSPEC_MOVMEM 21)(UNSPEC_SETMEM 22)(UNSPEC_STRLEN 23)(UNSPEC_CMPSTRN 24)(UNSPEC_BUILTIN_BRK 30)(UNSPEC_BUILTIN_CLRPSW 31)(UNSPEC_BUILTIN_INT 32)(UNSPEC_BUILTIN_MACHI 33)(UNSPEC_BUILTIN_MACLO 34)(UNSPEC_BUILTIN_MULHI 35)(UNSPEC_BUILTIN_MULLO 36)(UNSPEC_BUILTIN_MVFACHI 37)(UNSPEC_BUILTIN_MVFACMI 38)(UNSPEC_BUILTIN_MVFC 39)(UNSPEC_BUILTIN_MVFCP 40)(UNSPEC_BUILTIN_MVTACHI 41)(UNSPEC_BUILTIN_MVTACLO 42)(UNSPEC_BUILTIN_MVTC 43)(UNSPEC_BUILTIN_MVTIPL 44)(UNSPEC_BUILTIN_RACW 45)(UNSPEC_BUILTIN_REVW 46)(UNSPEC_BUILTIN_RMPA 47)(UNSPEC_BUILTIN_ROUND 48)(UNSPEC_BUILTIN_SAT 49)(UNSPEC_BUILTIN_SETPSW 50)(UNSPEC_BUILTIN_WAIT 51)])(define_attr "length" "" (const_int 8))(include "predicates.md")(include "constraints.md");; Pipeline description.;; The RX only has a single pipeline. It has five stages (fetch,;; decode, execute, memory access, writeback) each of which normally;; takes a single CPU clock cycle.;; The timings attribute consists of two numbers, the first is the;; throughput, which is the number of cycles the instruction takes;; to execute and generate a result. The second is the latency;; which is the effective number of cycles the instruction takes to;; execute if its result is used by the following instruction. The;; latency is always greater than or equal to the throughput.;; These values were taken from tables 2.13 and 2.14 in section 2.8;; of the RX610 Group Hardware Manual v0.11;; Note - it would be nice to use strings rather than integers for;; the possible values of this attribute, so that we can have the;; gcc build mechanism check for values that are not supported by;; the reservations below. But this will not work because the code;; in rx_adjust_sched_cost() needs integers not strings.(define_attr "timings" "" (const_int 11))(define_automaton "pipelining")(define_cpu_unit "throughput" "pipelining")(define_insn_reservation "throughput__1_latency__1" 1(eq_attr "timings" "11") "throughput")(define_insn_reservation "throughput__1_latency__2" 2(eq_attr "timings" "12") "throughput,nothing")(define_insn_reservation "throughput__2_latency__2" 1(eq_attr "timings" "22") "throughput*2")(define_insn_reservation "throughput__3_latency__3" 1(eq_attr "timings" "33") "throughput*3")(define_insn_reservation "throughput__3_latency__4" 2(eq_attr "timings" "34") "throughput*3,nothing")(define_insn_reservation "throughput__4_latency__4" 1(eq_attr "timings" "44") "throughput*4")(define_insn_reservation "throughput__4_latency__5" 2(eq_attr "timings" "45") "throughput*4,nothing")(define_insn_reservation "throughput__5_latency__5" 1(eq_attr "timings" "55") "throughput*5")(define_insn_reservation "throughput__5_latency__6" 2(eq_attr "timings" "56") "throughput*5,nothing")(define_insn_reservation "throughput__6_latency__6" 1(eq_attr "timings" "66") "throughput*6")(define_insn_reservation "throughput_10_latency_10" 1(eq_attr "timings" "1010") "throughput*10")(define_insn_reservation "throughput_11_latency_11" 1(eq_attr "timings" "1111") "throughput*11")(define_insn_reservation "throughput_16_latency_16" 1(eq_attr "timings" "1616") "throughput*16")(define_insn_reservation "throughput_18_latency_18" 1(eq_attr "timings" "1818") "throughput*18");; Comparisons;; Note - we do not specify the two instructions necessary to perform;; a compare-and-branch in the cbranchsi4 pattern because that would;; allow the comparison to be moved away from the jump before the reload;; pass has completed. That would be problematical because reload can;; generate ADDSI3 instructions which would corrupt the PSW flags.(define_expand "cbranchsi4"[(set (pc)(if_then_else (match_operator:SI 0 "comparison_operator"[(match_operand:SI 1 "register_operand")(match_operand:SI 2 "rx_source_operand")])(label_ref (match_operand 3 ""))(pc)))]"""")(define_insn_and_split "*cbranchsi4_<code>"[(set (pc)(if_then_else (most_cond:SI (match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "rx_source_operand" "riQ"))(label_ref (match_operand 2 "" ""))(pc)))]"""#""reload_completed"[(const_int 0)]"/* We contstruct the split by hand as otherwise the JUMP_LABELattribute is not set correctly on the jump insn. */emit_insn (gen_cmpsi (operands[0], operands[1]));emit_jump_insn (gen_conditional_branch (operands[2],gen_rtx_fmt_ee (<most_cond:CODE>, CCmode,gen_rtx_REG (CCmode, CC_REG), const0_rtx)));")(define_expand "cbranchsf4"[(set (pc)(if_then_else (match_operator:SF 0 "comparison_operator"[(match_operand:SF 1 "register_operand")(match_operand:SF 2 "rx_source_operand")])(label_ref (match_operand 3 ""))(pc)))]"ALLOW_RX_FPU_INSNS""")(define_insn_and_split "*cbranchsf4_<code>"[(set (pc)(if_then_else (most_cond:SF (match_operand:SF 0 "register_operand" "r")(match_operand:SF 1 "rx_source_operand" "rFiQ"))(label_ref (match_operand 2 "" ""))(pc)))]"ALLOW_RX_FPU_INSNS""#""&& reload_completed"[(const_int 0)]"/* We contstruct the split by hand as otherwise the JUMP_LABELattribute is not set correctly on the jump insn. */emit_insn (gen_cmpsf (operands[0], operands[1]));emit_jump_insn (gen_conditional_branch (operands[2],gen_rtx_fmt_ee (<most_cond:CODE>, CCmode,gen_rtx_REG (CCmode, CC_REG), const0_rtx)));")(define_insn "tstsi"[(set (reg:CC_ZS CC_REG)(compare:CC_ZS (and:SI (match_operand:SI 0 "register_operand" "r,r,r")(match_operand:SI 1 "rx_source_operand" "r,i,Q"))(const_int 0)))]""{rx_float_compare_mode = false;return "tst\t%Q1, %0";}[(set_attr "timings" "11,11,33")(set_attr "length" "3,7,6")])(define_insn "cmpsi"[(set (reg:CC CC_REG)(compare:CC (match_operand:SI 0 "register_operand" "r,r,r,r,r,r,r")(match_operand:SI 1 "rx_source_operand" "r,Uint04,Int08,Sint16,Sint24,i,Q")))]""{rx_float_compare_mode = false;if (rx_compare_redundant (insn))return "; Compare Eliminated: cmp %Q1, %0";return "cmp\t%Q1, %0";}[(set_attr "timings" "11,11,11,11,11,11,33")(set_attr "length" "2,2,3,4,5,6,5")]);; This pattern is disabled when -fnon-call-exceptions is active because;; it could generate a floating point exception, which would introduce an;; edge into the flow graph between this insn and the conditional branch;; insn to follow, thus breaking the cc0 relationship. Run the g++ test;; g++.dg/eh/080514-1.C to see this happen.(define_insn "cmpsf"[(set (reg:CC_ZSO CC_REG)(compare:CC_ZSO (match_operand:SF 0 "register_operand" "r,r,r")(match_operand:SF 1 "rx_source_operand" "r,iF,Q")))]"ALLOW_RX_FPU_INSNS"{rx_float_compare_mode = true;return "fcmp\t%1, %0";}[(set_attr "timings" "11,11,33")(set_attr "length" "3,7,5")]);; Flow Control Instructions:(define_expand "b<code>"[(set (pc)(if_then_else (most_cond (reg:CC CC_REG) (const_int 0))(label_ref (match_operand 0))(pc)))]"""")(define_insn "conditional_branch"[(set (pc)(if_then_else (match_operator 1 "comparison_operator"[(reg:CC CC_REG) (const_int 0)])(label_ref (match_operand 0 "" ""))(pc)))]""{return rx_gen_cond_branch_template (operands[1], false);}[(set_attr "length" "8") ;; This length is wrong, but it is;; too hard to compute statically.(set_attr "timings" "33")] ;; The timing assumes that the branch is taken.)(define_insn "*reveresed_conditional_branch"[(set (pc)(if_then_else (match_operator 1 "comparison_operator"[(reg:CC CC_REG) (const_int 0)])(pc)(label_ref (match_operand 0 "" ""))))]""{return rx_gen_cond_branch_template (operands[1], true);}[(set_attr "length" "8") ;; This length is wrong, but it is;; too hard to compute statically.(set_attr "timings" "33")] ;; The timing assumes that the branch is taken.)(define_insn "jump"[(set (pc)(label_ref (match_operand 0 "" "")))]"""bra\t%0"[(set_attr "length" "4")(set_attr "timings" "33")])(define_insn "indirect_jump"[(set (pc)(match_operand:SI 0 "register_operand" "r"))]"""jmp\t%0"[(set_attr "length" "2")(set_attr "timings" "33")])(define_insn "tablejump"[(set (pc)(match_operand:SI 0 "register_operand" "r"))(use (label_ref (match_operand 1 "" "")))]""{ return flag_pic ? (TARGET_AS100_SYNTAX ? "\n?:\tbra\t%0": "\n1:\tbra\t%0"): "jmp\t%0";}[(set_attr "timings" "33")(set_attr "length" "2")])(define_insn "simple_return"[(return)]"""rts"[(set_attr "length" "1")(set_attr "timings" "55")])(define_insn "deallocate_and_return"[(set (reg:SI SP_REG)(plus:SI (reg:SI SP_REG)(match_operand:SI 0 "immediate_operand" "i")))(return)]"""rtsd\t%0"[(set_attr "length" "2")(set_attr "timings" "55")])(define_insn "pop_and_return"[(match_parallel 1 "rx_rtsd_vector"[(set:SI (reg:SI SP_REG)(plus:SI (reg:SI SP_REG)(match_operand:SI 0 "const_int_operand" "n")))])]"reload_completed"{rx_emit_stack_popm (operands, false);return "";}[(set_attr "length" "3")(set_attr "timings" "56")])(define_insn "fast_interrupt_return"[(unspec_volatile [(return)] UNSPEC_RTFI) ]"""rtfi"[(set_attr "length" "2")(set_attr "timings" "33")])(define_insn "exception_return"[(unspec_volatile [(return)] UNSPEC_RTE) ]"""rte"[(set_attr "length" "2")(set_attr "timings" "66")])(define_insn "naked_return"[(unspec_volatile [(return)] UNSPEC_NAKED) ]"""; Naked function: epilogue provided by programmer.");; Note - the following set of patterns do not use the "memory_operand";; predicate or an "m" constraint because we do not allow symbol_refs;; or label_refs as legitmate memory addresses. This matches the;; behaviour of most of the RX instructions. Only the call/branch;; instructions are allowed to refer to symbols/labels directly.;; The call operands are in QImode because that is the value of;; FUNCTION_MODE(define_expand "call"[(call (match_operand:QI 0 "general_operand")(match_operand:SI 1 "general_operand"))]""{rtx dest = XEXP (operands[0], 0);if (! rx_call_operand (dest, Pmode))dest = force_reg (Pmode, dest);emit_call_insn (gen_call_internal (dest, operands[1]));DONE;})(define_insn "call_internal"[(call (mem:QI (match_operand:SI 0 "rx_call_operand" "r,Symbol"))(match_operand:SI 1 "general_operand" "g,g"))(clobber (reg:CC CC_REG))]"""@jsr\t%0bsr\t%A0"[(set_attr "length" "2,4")(set_attr "timings" "33")])(define_expand "call_value"[(set (match_operand 0 "register_operand")(call (match_operand:QI 1 "general_operand")(match_operand:SI 2 "general_operand")))]""{rtx dest = XEXP (operands[1], 0);if (! rx_call_operand (dest, Pmode))dest = force_reg (Pmode, dest);emit_call_insn (gen_call_value_internal (operands[0], dest, operands[2]));DONE;})(define_insn "call_value_internal"[(set (match_operand 0 "register_operand" "=r,r")(call (mem:QI (match_operand:SI 1 "rx_call_operand" "r,Symbol"))(match_operand:SI 2 "general_operand" "g,g")))(clobber (reg:CC CC_REG))]"""@jsr\t%1bsr\t%A1"[(set_attr "length" "2,4")(set_attr "timings" "33")]);; Note - we do not allow indirect sibcalls (with the address;; held in a register) because we cannot guarantee that the register;; chosen will be a call-used one. If it is a call-saved register,;; then the epilogue code will corrupt it by popping the saved value;; off of the stack.(define_expand "sibcall"[(parallel[(call (mem:QI (match_operand:SI 0 "rx_symbolic_call_operand"))(match_operand:SI 1 "general_operand"))(return)])]""{if (MEM_P (operands[0]))operands[0] = XEXP (operands[0], 0);})(define_insn "sibcall_internal"[(call (mem:QI (match_operand:SI 0 "rx_symbolic_call_operand" "Symbol"))(match_operand:SI 1 "general_operand" "g"))(return)]"""bra\t%A0"[(set_attr "length" "4")(set_attr "timings" "33")])(define_expand "sibcall_value"[(parallel[(set (match_operand 0 "register_operand")(call (mem:QI (match_operand:SI 1 "rx_symbolic_call_operand"))(match_operand:SI 2 "general_operand")))(return)])]""{if (MEM_P (operands[1]))operands[1] = XEXP (operands[1], 0);})(define_insn "sibcall_value_internal"[(set (match_operand 0 "register_operand" "=r")(call (mem:QI (match_operand:SI 1 "rx_symbolic_call_operand" "Symbol"))(match_operand:SI 2 "general_operand" "g")))(return)]"""bra\t%A1"[(set_attr "length" "4")(set_attr "timings" "33")]);; Function Prologue/Epilogue Instructions(define_expand "prologue"[(const_int 0)]"""rx_expand_prologue (); DONE;")(define_expand "epilogue"[(return)]"""rx_expand_epilogue (false); DONE;")(define_expand "sibcall_epilogue"[(return)]"""rx_expand_epilogue (true); DONE;");; Move Instructions;; Note - we do not allow memory to memory moves, even though the ISA;; supports them. The reason is that the conditions on such moves are;; too restrictive, specifically the source addressing mode is limited;; by the destination addressing mode and vice versa. (For example it;; is not possible to use indexed register indirect addressing for one;; of the operands if the other operand is anything other than a register,;; but it is possible to use register relative addressing when the other;; operand also uses register relative or register indirect addressing).;;;; GCC does not support computing legitimate addresses based on the;; nature of other operands involved in the instruction, and reload is;; not smart enough to cope with a whole variety of different memory;; addressing constraints, so it is simpler and safer to just refuse;; to support memory to memory moves.(define_expand "mov<register_modes:mode>"[(set (match_operand:register_modes 0 "general_operand")(match_operand:register_modes 1 "general_operand"))]""{if (MEM_P (operand0) && MEM_P (operand1))operands[1] = copy_to_mode_reg (<register_modes:MODE>mode, operand1);})(define_insn "*mov<register_modes:mode>_internal"[(set (match_operand:register_modes0 "nonimmediate_operand" "=r,r,r,r,r,r,m,Q,Q,Q,Q")(match_operand:register_modes1 "general_operand" "Int08,Sint16,Sint24,i,r,m,r,Int08,Sint16,Sint24,i"))]""{ return rx_gen_move_template (operands, false); }[(set_attr "length" "3,4,5,6,2,4,6,5,6,7,8")(set_attr "timings" "11,11,11,11,11,12,11,11,11,11,11")])(define_insn "extend<small_int_modes:mode>si2"[(set (match_operand:SI 0 "register_operand" "=r,r")(sign_extend:SI (match_operand:small_int_modes1 "nonimmediate_operand" "r,m")))]""{ return rx_gen_move_template (operands, false); }[(set_attr "length" "2,6")(set_attr "timings" "11,12")])(define_insn "zero_extend<small_int_modes:mode>si2"[(set (match_operand:SI 0 "register_operand" "=r,r")(zero_extend:SI (match_operand:small_int_modes1 "nonimmediate_operand" "r,m")))]""{ return rx_gen_move_template (operands, true); }[(set_attr "length" "2,4")(set_attr "timings" "11,12")])(define_insn "stack_push"[(set:SI (reg:SI SP_REG)(minus:SI (reg:SI SP_REG)(const_int 4)))(set:SI (mem:SI (reg:SI SP_REG))(match_operand:SI 0 "register_operand" "r"))]"""push.l\t%0"[(set_attr "length" "2")])(define_insn "stack_pushm"[(match_parallel 1 "rx_store_multiple_vector"[(set:SI (reg:SI SP_REG)(minus:SI (reg:SI SP_REG)(match_operand:SI 0 "const_int_operand" "n")))])]"reload_completed"{rx_emit_stack_pushm (operands);return "";}[(set_attr "length" "2")(set_attr "timings" "44")] ;; The timing is a guesstimate average timing.)(define_insn "stack_pop"[(set:SI (match_operand:SI 0 "register_operand" "=r")(mem:SI (reg:SI SP_REG)))(set:SI (reg:SI SP_REG)(plus:SI (reg:SI SP_REG)(const_int 4)))]"""pop\t%0"[(set_attr "length" "2")(set_attr "timings" "12")])(define_insn "stack_popm"[(match_parallel 1 "rx_load_multiple_vector"[(set:SI (reg:SI SP_REG)(plus:SI (reg:SI SP_REG)(match_operand:SI 0 "const_int_operand" "n")))])]"reload_completed"{rx_emit_stack_popm (operands, true);return "";}[(set_attr "length" "2")(set_attr "timings" "45")] ;; The timing is a guesstimate average timing.);; FIXME: Add memory destination options ?(define_insn "cstoresi4"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r")(match_operator:SI 1 "comparison_operator"[(match_operand:SI 2 "register_operand" "r,r,r,r,r,r,r")(match_operand:SI 3 "rx_source_operand" "r,Uint04,Int08,Sint16,Sint24,i,Q")]))(clobber (reg:CC CC_REG))] ;; Because the cc flags are set based on comparing ops 2 & 3 not the value in op 0.""{rx_float_compare_mode = false;return "cmp\t%Q3, %Q2\n\tsc%B1.L\t%0";}[(set_attr "timings" "22,22,22,22,22,22,44")(set_attr "length" "5,5,6,7,8,9,8")])(define_expand "movsicc"[(parallel[(set (match_operand:SI 0 "register_operand")(if_then_else:SI (match_operand:SI 1 "comparison_operator")(match_operand:SI 2 "nonmemory_operand")(match_operand:SI 3 "immediate_operand")))(clobber (reg:CC CC_REG))])] ;; See cstoresi4""{if (GET_CODE (operands[1]) != EQ && GET_CODE (operands[1]) != NE)FAIL;if (! CONST_INT_P (operands[3]))FAIL;})(define_insn "*movsieq"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(if_then_else:SI (eq (match_operand:SI 3 "register_operand" "r,r,r")(match_operand:SI 4 "rx_source_operand" "riQ,riQ,riQ"))(match_operand:SI 1 "nonmemory_operand" "0,i,r")(match_operand:SI 2 "immediate_operand" "i,i,i")))(clobber (reg:CC CC_REG))] ;; See cstoresi4"""@cmp\t%Q4, %Q3\n\tstnz\t%2, %0cmp\t%Q4, %Q3\n\tmov.l\t%2, %0\n\tstz\t%1, %0cmp\t%Q4, %Q3\n\tmov.l\t%1, %0\n\tstnz\t%2, %0"[(set_attr "length" "13,19,15")(set_attr "timings" "22,33,33")])(define_insn "*movsine"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(if_then_else:SI (ne (match_operand:SI 3 "register_operand" "r,r,r")(match_operand:SI 4 "rx_source_operand" "riQ,riQ,riQ"))(match_operand:SI 1 "nonmemory_operand" "0,i,r")(match_operand:SI 2 "immediate_operand" "i,i,i")))(clobber (reg:CC CC_REG))] ;; See cstoresi4"""@cmp\t%Q4, %Q3\n\tstz\t%2, %0cmp\t%Q4, %Q3\n\tmov.l\t%2, %0\n\tstnz\t%1, %0cmp\t%Q4, %Q3\n\tmov.l\t%1, %0\n\tstz\t%2, %0"[(set_attr "length" "13,19,15")(set_attr "timings" "22,33,33")]);; Arithmetic Instructions(define_insn "abssi2"[(set (match_operand:SI 0 "register_operand" "=r,r")(abs:SI (match_operand:SI 1 "register_operand" "0,r")))(set (reg:CC_ZSO CC_REG)(compare:CC_ZSO (abs:SI (match_dup 1))(const_int 0)))]"""@abs\t%0abs\t%1, %0"[(set_attr "length" "2,3")])(define_insn "addsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r,r,r,r,r,r")(plus:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,0,r,r,r,r,r,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,NEGint4,Sint08,Sint16,Sint24,i,0,r,Sint08,Sint16,Sint24,i,Q")))(set (reg:CC_ZSC CC_REG) ;; See subsi3(compare:CC_ZSC (plus:SI (match_dup 1) (match_dup 2))(const_int 0)))]"""@add\t%2, %0add\t%2, %0sub\t%N2, %0add\t%2, %0add\t%2, %0add\t%2, %0add\t%2, %0add\t%1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,11,11,11,11,11,11,11,11,33")(set_attr "length" "2,2,2,3,4,5,6,2,3,3,4,5,6,5")])(define_insn "adddi3"[(set (match_operand:DI 0 "register_operand" "=r,r,r,r,r,r")(plus:DI (match_operand:DI 1 "register_operand" "%0,0,0,0,0,0")(match_operand:DI 2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q")))(set (reg:CC_ZSC CC_REG) ;; See subsi3(compare:CC_ZSC (plus:DI (match_dup 1) (match_dup 2))(const_int 0)))]"""add\t%L2, %L0\n\tadc\t%H2, %H0"[(set_attr "timings" "22,22,22,22,22,44")(set_attr "length" "5,7,9,11,13,11")])(define_insn "andsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r")(and:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,r,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,Sint08,Sint16,Sint24,i,0,r,Q")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (and:SI (match_dup 1) (match_dup 2))(const_int 0)))]"""@and\t%2, %0and\t%2, %0and\t%2, %0and\t%2, %0and\t%2, %0and\t%2, %0and\t%1, %0and\t%2, %1, %0and\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,11,11,33,33")(set_attr "length" "2,2,3,4,5,6,2,5,5")]);; Byte swap (single 32-bit value).(define_insn "bswapsi2"[(set (match_operand:SI 0 "register_operand" "+r")(bswap:SI (match_operand:SI 1 "register_operand" "r")))]"""revl\t%1, %0"[(set_attr "length" "3")]);; Byte swap (single 16-bit value). Note - we ignore the swapping of the high 16-bits.(define_insn "bswaphi2"[(set (match_operand:HI 0 "register_operand" "+r")(bswap:HI (match_operand:HI 1 "register_operand" "r")))]"""revw\t%1, %0"[(set_attr "length" "3")])(define_insn "divsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(div:SI (match_operand:SI 1 "register_operand" "0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand" "r,Sint08,Sint16,Sint24,i,Q")))(clobber (reg:CC CC_REG))]"""div\t%Q2, %0"[(set_attr "timings" "1111") ;; Strictly speaking the timing should be;; 2222, but that is a worst case sceanario.(set_attr "length" "3,4,5,6,7,6")])(define_insn "udivsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(udiv:SI (match_operand:SI 1 "register_operand" "0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand" "r,Sint08,Sint16,Sint24,i,Q")))(clobber (reg:CC CC_REG))]"""divu\t%Q2, %0"[(set_attr "timings" "1010") ;; Strictly speaking the timing should be;; 2020, but that is a worst case sceanario.(set_attr "length" "3,4,5,6,7,6")]);; Note - these patterns are suppressed in big-endian mode because they;; generate a little endian result. ie the most significant word of the;; result is placed in the higher numbered register of the destination;; register pair.(define_insn "mulsidi3"[(set (match_operand:DI 0 "register_operand" "=r,r,r,r,r,r")(mult:DI (sign_extend:DI (match_operand:SI1 "register_operand" "%0,0,0,0,0,0"))(sign_extend:DI (match_operand:SI2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q"))))]"! TARGET_BIG_ENDIAN_DATA""emul\t%Q2, %0"[(set_attr "length" "3,4,5,6,7,6")(set_attr "timings" "22,22,22,22,22,44")]);; See comment for mulsidi3.;; Note - the zero_extends are to distinguish this pattern from the;; mulsidi3 pattern. Immediate mode addressing is not supported;; because gcc cannot handle the expression: (zero_extend (const_int)).(define_insn "umulsidi3"[(set (match_operand:DI 0 "register_operand" "=r,r")(mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "%0,0"))(zero_extend:DI (match_operand:SI 2 "rx_compare_operand" "r,Q"))))]"! TARGET_BIG_ENDIAN_DATA""emulu\t%Q2, %0"[(set_attr "length" "3,6")(set_attr "timings" "22,44")])(define_insn "smaxsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(smax:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q")))]"""max\t%Q2, %0"[(set_attr "length" "3,4,5,6,7,6")(set_attr "timings" "11,11,11,11,11,33")])(define_insn "sminsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(smin:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q")))]"""min\t%Q2, %0"[(set_attr "length" "3,4,5,6,7,6")(set_attr "timings" "11,11,11,11,11,33")])(define_insn "mulsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r")(mult:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,0,r,r")(match_operand:SI 2 "rx_source_operand""r,Uint04,Sint08,Sint16,Sint24,i,Q,0,r")))]"""@mul\t%2, %0mul\t%2, %0mul\t%2, %0mul\t%2, %0mul\t%2, %0mul\t%Q2, %0mul\t%Q2, %0mul\t%1, %0mul\t%2, %1, %0"[(set_attr "length" "2,2,3,4,5,6,5,2,3")(set_attr "timings" "11,11,11,11,11,11,33,11,11")])(define_insn "negsi2"[(set (match_operand:SI 0 "register_operand" "=r,r")(neg:SI (match_operand:SI 1 "register_operand" "0,r")))(set (reg:CC CC_REG)(compare:CC (neg:SI (match_dup 1))(const_int 0)))];; The NEG instruction does not comply with -fwrapv semantics.;; See gcc.c-torture/execute/pr22493-1.c for an example of this."! flag_wrapv""@neg\t%0neg\t%1, %0"[(set_attr "length" "2,3")])(define_insn "one_cmplsi2"[(set (match_operand:SI 0 "register_operand" "=r,r")(not:SI (match_operand:SI 1 "register_operand" "0,r")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (not:SI (match_dup 1))(const_int 0)))]"""@not\t%0not\t%1, %0"[(set_attr "length" "2,3")])(define_insn "iorsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r")(ior:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,r,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,Sint08,Sint16,Sint24,i,0,r,Q")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (ior:SI (match_dup 1) (match_dup 2))(const_int 0)))]"""@or\t%2, %0or\t%2, %0or\t%2, %0or\t%2, %0or\t%2, %0or\t%Q2, %0or\t%1, %0or\t%2, %1, %0or\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,11,11,11,33")(set_attr "length" "2,2,3,4,5,6,2,3,5")])(define_insn "rotlsi3"[(set (match_operand:SI 0 "register_operand" "=r")(rotate:SI (match_operand:SI 1 "register_operand" "0")(match_operand:SI 2 "rx_shift_operand" "rn")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (rotate:SI (match_dup 1) (match_dup 2))(const_int 0)))]"""rotl\t%2, %0"[(set_attr "length" "3")])(define_insn "rotrsi3"[(set (match_operand:SI 0 "register_operand" "=r")(rotatert:SI (match_operand:SI 1 "register_operand" "0")(match_operand:SI 2 "rx_shift_operand" "rn")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (rotatert:SI (match_dup 1) (match_dup 2))(const_int 0)))]"""rotr\t%2, %0"[(set_attr "length" "3")])(define_insn "ashrsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(ashiftrt:SI (match_operand:SI 1 "register_operand" "0,0,r")(match_operand:SI 2 "rx_shift_operand" "r,n,n")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (ashiftrt:SI (match_dup 1) (match_dup 2))(const_int 0)))]"""@shar\t%2, %0shar\t%2, %0shar\t%2, %1, %0"[(set_attr "length" "3,2,3")])(define_insn "lshrsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(lshiftrt:SI (match_operand:SI 1 "register_operand" "0,0,r")(match_operand:SI 2 "rx_shift_operand" "r,n,n")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (lshiftrt:SI (match_dup 1) (match_dup 2))(const_int 0)))]"""@shlr\t%2, %0shlr\t%2, %0shlr\t%2, %1, %0"[(set_attr "length" "3,2,3")])(define_insn "ashlsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(ashift:SI (match_operand:SI 1 "register_operand" "0,0,r")(match_operand:SI 2 "rx_shift_operand" "r,n,n")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (ashift:SI (match_dup 1) (match_dup 2))(const_int 0)))]"""@shll\t%2, %0shll\t%2, %0shll\t%2, %1, %0"[(set_attr "length" "3,2,3")])(define_insn "subsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r")(minus:SI (match_operand:SI 1 "register_operand" "0,0,0,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,n,r,Q")))(set (reg:CC_ZSC CC_REG);; Note - we do not acknowledge that the SUB instruction sets the Overflow;; flag because its interpretation is different from comparing the result;; against zero. Compile and run gcc.c-torture/execute/cmpsi-1.c to see this.(compare:CC_ZSC (minus:SI (match_dup 1) (match_dup 2))(const_int 0)))]"""@sub\t%2, %0sub\t%2, %0add\t%N2, %0sub\t%2, %1, %0sub\t%Q2, %0"[(set_attr "timings" "11,11,11,11,33")(set_attr "length" "2,2,6,3,5")])(define_insn "subdi3"[(set (match_operand:DI 0 "register_operand" "=r,r")(minus:DI (match_operand:DI 1 "register_operand" "0,0")(match_operand:DI 2 "rx_source_operand" "r,Q")))(set (reg:CC_ZSC CC_REG) ;; See subsi3(compare:CC_ZSC (minus:DI (match_dup 1) (match_dup 2))(const_int 0)))]"""sub\t%L2, %L0\n\tsbb\t%H2, %H0"[(set_attr "timings" "22,44")(set_attr "length" "5,11")])(define_insn "xorsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(xor:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (xor:SI (match_dup 1) (match_dup 2))(const_int 0)))]"""xor\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,33")(set_attr "length" "3,4,5,6,7,6")]);; Floating Point Instructions(define_insn "addsf3"[(set (match_operand:SF 0 "register_operand" "=r,r,r")(plus:SF (match_operand:SF 1 "register_operand" "%0,0,0")(match_operand:SF 2 "rx_source_operand" "r,F,Q")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (plus:SF (match_dup 1) (match_dup 2))(const_int 0)))]"ALLOW_RX_FPU_INSNS""fadd\t%2, %0"[(set_attr "timings" "44,44,66")(set_attr "length" "3,7,5")])(define_insn "divsf3"[(set (match_operand:SF 0 "register_operand" "=r,r,r")(div:SF (match_operand:SF 1 "register_operand" "0,0,0")(match_operand:SF 2 "rx_source_operand" "r,F,Q")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (div:SF (match_dup 1) (match_dup 2))(const_int 0)))]"ALLOW_RX_FPU_INSNS""fdiv\t%2, %0"[(set_attr "timings" "1616,1616,1818")(set_attr "length" "3,7,5")])(define_insn "mulsf3"[(set (match_operand:SF 0 "register_operand" "=r,r,r")(mult:SF (match_operand:SF 1 "register_operand" "%0,0,0")(match_operand:SF 2 "rx_source_operand" "r,F,Q")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (mult:SF (match_dup 1) (match_dup 2))(const_int 0)))]"ALLOW_RX_FPU_INSNS""fmul\t%2, %0"[(set_attr "timings" "33,33,55")(set_attr "length" "3,7,5")])(define_insn "subsf3"[(set (match_operand:SF 0 "register_operand" "=r,r,r")(minus:SF (match_operand:SF 1 "register_operand" "0,0,0")(match_operand:SF 2 "rx_source_operand" "r,F,Q")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (minus:SF (match_dup 1) (match_dup 2))(const_int 0)))]"ALLOW_RX_FPU_INSNS""fsub\t%Q2, %0"[(set_attr "timings" "44,44,66")(set_attr "length" "3,7,5")])(define_insn "fix_truncsfsi2"[(set (match_operand:SI 0 "register_operand" "=r,r")(fix:SI (match_operand:SF 1 "rx_compare_operand" "r,Q")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (fix:SI (match_dup 1))(const_int 0)))]"ALLOW_RX_FPU_INSNS""ftoi\t%Q1, %0"[(set_attr "timings" "22,44")(set_attr "length" "3,5")])(define_insn "floatsisf2"[(set (match_operand:SF 0 "register_operand" "=r,r")(float:SF (match_operand:SI 1 "rx_compare_operand" "r,Q")))(set (reg:CC_ZS CC_REG)(compare:CC_ZS (float:SF (match_dup 1))(const_int 0)))]"ALLOW_RX_FPU_INSNS""itof\t%Q1, %0"[(set_attr "timings" "22,44")(set_attr "length" "3,6")]);; Bit manipulation instructions.;; Note - there are two versions of each pattern because the memory;; accessing versions use QImode whilst the register accessing;; versions use SImode.;; The peephole are here because the combiner only looks at a maximum;; of three instructions at a time.(define_insn "bitset"[(set:SI (match_operand:SI 0 "register_operand" "=r")(ior:SI (match_operand:SI 1 "register_operand" "0")(ashift:SI (const_int 1)(match_operand:SI 2 "nonmemory_operand" "ri"))))]"""bset\t%2, %0"[(set_attr "length" "3")])(define_insn "bitset_in_memory"[(set:QI (match_operand:QI 0 "memory_operand" "=m")(ior:QI (match_operand:QI 1 "memory_operand" "0")(ashift:QI (const_int 1)(match_operand:QI 2 "nonmemory_operand" "ri"))))]"""bset\t%2, %0.B"[(set_attr "length" "3")(set_attr "timings" "34")]);; (set (reg A) (const_int 1));; (set (reg A) (ashift (reg A) (reg B)));; (set (reg C) (ior (reg A) (reg C)))(define_peephole2[(set:SI (match_operand:SI 0 "register_operand" "")(const_int 1))(set:SI (match_dup 0)(ashift:SI (match_dup 0)(match_operand:SI 1 "register_operand" "")))(set:SI (match_operand:SI 2 "register_operand" "")(ior:SI (match_dup 0)(match_dup 2)))]"dead_or_set_p (insn, operands[0])"[(set:SI (match_dup 2)(ior:SI (match_dup 2)(ashift:SI (const_int 1)(match_dup 1))))]);; (set (reg A) (const_int 1));; (set (reg A) (ashift (reg A) (reg B)));; (set (reg A) (ior (reg A) (reg C)));; (set (reg C) (reg A)(define_peephole2[(set:SI (match_operand:SI 0 "register_operand" "")(const_int 1))(set:SI (match_dup 0)(ashift:SI (match_dup 0)(match_operand:SI 1 "register_operand" "")))(set:SI (match_dup 0)(ior:SI (match_dup 0)(match_operand:SI 2 "register_operand" "")))(set:SI (match_dup 2) (match_dup 0))]"dead_or_set_p (insn, operands[0])"[(set:SI (match_dup 2)(ior:SI (match_dup 2)(ashift:SI (const_int 1)(match_dup 1))))])(define_insn "bitinvert"[(set:SI (match_operand:SI 0 "register_operand" "+r")(xor:SI (match_operand:SI 1 "register_operand" "0")(ashift:SI (const_int 1)(match_operand:SI 2 "nonmemory_operand" "ri"))))]"""bnot\t%2, %0"[(set_attr "length" "3")])(define_insn "bitinvert_in_memory"[(set:QI (match_operand:QI 0 "memory_operand" "+m")(xor:QI (match_operand:QI 1 "register_operand" "0")(ashift:QI (const_int 1)(match_operand:QI 2 "nonmemory_operand" "ri"))))]"""bnot\t%2, %0.B"[(set_attr "length" "5")(set_attr "timings" "33")]);; (set (reg A) (const_int 1));; (set (reg A) (ashift (reg A) (reg B)));; (set (reg C) (xor (reg A) (reg C)))(define_peephole2[(set:SI (match_operand:SI 0 "register_operand" "")(const_int 1))(set:SI (match_dup 0)(ashift:SI (match_dup 0)(match_operand:SI 1 "register_operand" "")))(set:SI (match_operand:SI 2 "register_operand" "")(xor:SI (match_dup 0)(match_dup 2)))]"dead_or_set_p (insn, operands[0])"[(set:SI (match_dup 2)(xor:SI (match_dup 2)(ashift:SI (const_int 1)(match_dup 1))))]"");; (set (reg A) (const_int 1));; (set (reg A) (ashift (reg A) (reg B)));; (set (reg A) (xor (reg A) (reg C)));; (set (reg C) (reg A))(define_peephole2[(set:SI (match_operand:SI 0 "register_operand" "")(const_int 1))(set:SI (match_dup 0)(ashift:SI (match_dup 0)(match_operand:SI 1 "register_operand" "")))(set:SI (match_dup 0)(xor:SI (match_dup 0)(match_operand:SI 2 "register_operand" "")))(set:SI (match_dup 2) (match_dup 0))]"dead_or_set_p (insn, operands[0])"[(set:SI (match_dup 2)(xor:SI (match_dup 2)(ashift:SI (const_int 1)(match_dup 1))))]"")(define_insn "bitclr"[(set:SI (match_operand:SI 0 "register_operand" "+r")(and:SI (match_operand:SI 1 "register_operand" "0")(not:SI (ashift:SI (const_int 1)(match_operand:SI 2 "nonmemory_operand" "ri")))))]"""bclr\t%2, %0"[(set_attr "length" "3")])(define_insn "bitclr_in_memory"[(set:QI (match_operand:QI 0 "memory_operand" "+m")(and:QI (match_operand:QI 1 "memory_operand" "0")(not:QI (ashift:QI (const_int 1)(match_operand:QI 2 "nonmemory_operand" "ri")))))]"""bclr\t%2, %0.B"[(set_attr "length" "3")(set_attr "timings" "34")]);; (set (reg A) (const_int -2));; (set (reg A) (rotate (reg A) (reg B)));; (set (reg C) (and (reg A) (reg C)))(define_peephole2[(set:SI (match_operand:SI 0 "register_operand" "")(const_int -2))(set:SI (match_dup 0)(rotate:SI (match_dup 0)(match_operand:SI 1 "register_operand" "")))(set:SI (match_operand:SI 2 "register_operand" "")(and:SI (match_dup 0)(match_dup 2)))]"dead_or_set_p (insn, operands[0])"[(set:SI (match_dup 2)(and:SI (match_dup 2)(not:SI (ashift:SI (const_int 1)(match_dup 1)))))]);; (set (reg A) (const_int -2));; (set (reg A) (rotate (reg A) (reg B)));; (set (reg A) (and (reg A) (reg C)));; (set (reg C) (reg A)(define_peephole2[(set:SI (match_operand:SI 0 "register_operand" "")(const_int -2))(set:SI (match_dup 0)(rotate:SI (match_dup 0)(match_operand:SI 1 "register_operand" "")))(set:SI (match_dup 0)(and:SI (match_dup 0)(match_operand:SI 2 "register_operand" "")))(set:SI (match_dup 2) (match_dup 0))]"dead_or_set_p (insn, operands[0])"[(set:SI (match_dup 2)(and:SI (match_dup 2)(not:SI (ashift:SI (const_int 1)(match_dup 1)))))])(define_expand "insv"[(set:SI (zero_extract:SI (match_operand:SI 0 "nonimmediate_operand") ;; Destination(match_operand 1 "immediate_operand") ;; # of bits to set(match_operand 2 "immediate_operand")) ;; Starting bit(match_operand 3 "immediate_operand"))] ;; Bits to insert""{if (rx_expand_insv (operands))DONE;FAIL;});; Atomic exchange operation.(define_insn "sync_lock_test_and_setsi"[(set:SI (match_operand:SI 0 "register_operand" "=r,r")(match_operand:SI 1 "rx_compare_operand" "=r,Q"))(set:SI (match_dup 1)(match_operand:SI 2 "register_operand" "0,0"))]"""xchg\t%1, %0"[(set_attr "length" "3,6")(set_attr "timings" "22")]);; Block move functions.(define_expand "movstr"[(set:SI (match_operand:BLK 1 "memory_operand") ;; Dest(match_operand:BLK 2 "memory_operand")) ;; Source(use (match_operand:SI 0 "register_operand")) ;; Updated Dest]""{rtx addr1 = gen_rtx_REG (SImode, 1);rtx addr2 = gen_rtx_REG (SImode, 2);rtx len = gen_rtx_REG (SImode, 3);rtx dest_copy = gen_reg_rtx (SImode);emit_move_insn (len, GEN_INT (-1));emit_move_insn (addr1, force_operand (XEXP (operands[1], 0), NULL_RTX));emit_move_insn (addr2, force_operand (XEXP (operands[2], 0), NULL_RTX));operands[1] = replace_equiv_address_nv (operands[1], addr1);operands[2] = replace_equiv_address_nv (operands[2], addr2);emit_move_insn (dest_copy, addr1);emit_insn (gen_rx_movstr ());emit_move_insn (len, GEN_INT (-1));emit_insn (gen_rx_strend (operands[0], dest_copy));DONE;})(define_insn "rx_movstr"[(set:SI (mem:BLK (reg:SI 1))(mem:BLK (reg:SI 2)))(unspec_volatile:BLK [(reg:SI 1) (reg:SI 2) (reg:SI 3)] UNSPEC_MOVSTR)(clobber (reg:SI 1))(clobber (reg:SI 2))(clobber (reg:SI 3))]"""smovu"[(set_attr "length" "2")(set_attr "timings" "1111")] ;; The timing is a guesstimate.)(define_insn "rx_strend"[(set:SI (match_operand:SI 0 "register_operand" "=r")(unspec_volatile:SI [(match_operand:SI 1 "register_operand" "r")(reg:SI 3)] UNSPEC_STRLEN))(clobber (reg:SI 1))(clobber (reg:SI 2))(clobber (reg:SI 3))(clobber (reg:CC CC_REG))]"""mov\t%1, r1\n\tmov\t#0, r2\n\tsuntil.b\n\tmov\tr1, %0\n\tsub\t#1, %0"[(set_attr "length" "10")(set_attr "timings" "1111")] ;; The timing is a guesstimate.)(define_expand "movmemsi"[(parallel[(set (match_operand:BLK 0 "memory_operand") ;; Dest(match_operand:BLK 1 "memory_operand")) ;; Source(use (match_operand:SI 2 "register_operand")) ;; Length in bytes(match_operand 3 "immediate_operand") ;; Align(unspec_volatile:BLK [(reg:SI 1) (reg:SI 2) (reg:SI 3)] UNSPEC_MOVMEM)])]""{rtx addr1 = gen_rtx_REG (SImode, 1);rtx addr2 = gen_rtx_REG (SImode, 2);rtx len = gen_rtx_REG (SImode, 3);if (REG_P (operands[0]) && (REGNO (operands[0]) == 2|| REGNO (operands[0]) == 3))FAIL;if (REG_P (operands[1]) && (REGNO (operands[1]) == 1|| REGNO (operands[1]) == 3))FAIL;if (REG_P (operands[2]) && (REGNO (operands[2]) == 1|| REGNO (operands[2]) == 2))FAIL;emit_move_insn (addr1, force_operand (XEXP (operands[0], 0), NULL_RTX));emit_move_insn (addr2, force_operand (XEXP (operands[1], 0), NULL_RTX));emit_move_insn (len, force_operand (operands[2], NULL_RTX));operands[0] = replace_equiv_address_nv (operands[0], addr1);operands[1] = replace_equiv_address_nv (operands[1], addr2);emit_insn (gen_rx_movmem ());DONE;})(define_insn "rx_movmem"[(set (mem:BLK (reg:SI 1))(mem:BLK (reg:SI 2)))(use (reg:SI 3))(unspec_volatile:BLK [(reg:SI 1) (reg:SI 2) (reg:SI 3)] UNSPEC_MOVMEM)(clobber (reg:SI 1))(clobber (reg:SI 2))(clobber (reg:SI 3))]"""smovf"[(set_attr "length" "2")(set_attr "timings" "1111")] ;; The timing is a guesstimate.)(define_expand "setmemsi"[(set (match_operand:BLK 0 "memory_operand") ;; Dest(match_operand:QI 2 "nonmemory_operand")) ;; Value(use (match_operand:SI 1 "nonmemory_operand")) ;; Length(match_operand 3 "immediate_operand") ;; Align(unspec_volatile:BLK [(reg:SI 1) (reg:SI 2) (reg:SI 3)] UNSPEC_SETMEM)]""{rtx addr = gen_rtx_REG (SImode, 1);rtx val = gen_rtx_REG (QImode, 2);rtx len = gen_rtx_REG (SImode, 3);emit_move_insn (addr, force_operand (XEXP (operands[0], 0), NULL_RTX));emit_move_insn (len, force_operand (operands[1], NULL_RTX));emit_move_insn (val, operands[2]);emit_insn (gen_rx_setmem ());DONE;})(define_insn "rx_setmem"[(set:BLK (mem:BLK (reg:SI 1)) (reg 2))(unspec_volatile:BLK [(reg:SI 1) (reg:SI 2) (reg:SI 3)] UNSPEC_SETMEM)(clobber (reg:SI 1))(clobber (reg:SI 3))]"""sstr.b"[(set_attr "length" "2")(set_attr "timings" "1111")] ;; The timing is a guesstimate.)(define_expand "cmpstrnsi"[(set (match_operand:SI 0 "register_operand") ;; Result(unspec_volatile:SI [(match_operand:BLK 1 "memory_operand") ;; String1(match_operand:BLK 2 "memory_operand")] ;; String2UNSPEC_CMPSTRN))(use (match_operand:SI 3 "register_operand")) ;; Max Length(match_operand:SI 4 "immediate_operand")] ;; Known Align""{rtx str1 = gen_rtx_REG (SImode, 1);rtx str2 = gen_rtx_REG (SImode, 2);rtx len = gen_rtx_REG (SImode, 3);emit_move_insn (str1, force_operand (XEXP (operands[1], 0), NULL_RTX));emit_move_insn (str2, force_operand (XEXP (operands[2], 0), NULL_RTX));emit_move_insn (len, force_operand (operands[3], NULL_RTX));emit_insn (gen_rx_cmpstrn (operands[0], operands[1], operands[2]));DONE;})(define_expand "cmpstrsi"[(set (match_operand:SI 0 "register_operand") ;; Result(unspec_volatile:SI [(match_operand:BLK 1 "memory_operand") ;; String1(match_operand:BLK 2 "memory_operand")] ;; String2UNSPEC_CMPSTRN))(match_operand:SI 3 "immediate_operand")] ;; Known Align""{rtx str1 = gen_rtx_REG (SImode, 1);rtx str2 = gen_rtx_REG (SImode, 2);rtx len = gen_rtx_REG (SImode, 3);emit_move_insn (str1, force_reg (SImode, XEXP (operands[1], 0)));emit_move_insn (str2, force_reg (SImode, XEXP (operands[2], 0)));emit_move_insn (len, GEN_INT (-1));emit_insn (gen_rx_cmpstrn (operands[0], operands[1], operands[2]));DONE;})(define_insn "rx_cmpstrn"[(set:SI (match_operand:SI 0 "register_operand" "=r")(unspec_volatile:SI [(reg:SI 1) (reg:SI 2) (reg:SI 3)]UNSPEC_CMPSTRN))(use (match_operand:BLK 1 "memory_operand" "m"))(use (match_operand:BLK 2 "memory_operand" "m"))(clobber (reg:SI 1))(clobber (reg:SI 2))(clobber (reg:SI 3))(clobber (reg:CC CC_REG))]"""scmpu ; Perform the string comparisonmov #-1, %0 ; Set up -1 result (which cannot be created; by the SC insn)bnc ?+ ; If Carry is not set skip overscne.L %0 ; Set result based on Z flag?:"[(set_attr "length" "9")(set_attr "timings" "1111")] ;; The timing is a guesstimate.);; Builtin Functions;;;; GCC does not have the ability to generate the following instructions;; on its own so they are provided as builtins instead. To use them from;; a program for example invoke them as __builtin_rx_<insn_name>. For;; example:;;;; int short_byte_swap (int arg) { return __builtin_rx_revw (arg); };;---------- Accumulator Support ------------------------;; Multiply & Accumulate (high)(define_insn "machi"[(unspec:SI [(match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "register_operand" "r")]UNSPEC_BUILTIN_MACHI)]"""machi\t%0, %1"[(set_attr "length" "3")]);; Multiply & Accumulate (low)(define_insn "maclo"[(unspec:SI [(match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "register_operand" "r")]UNSPEC_BUILTIN_MACLO)]"""maclo\t%0, %1"[(set_attr "length" "3")]);; Multiply (high)(define_insn "mulhi"[(unspec:SI [(match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "register_operand" "r")]UNSPEC_BUILTIN_MULHI)]"""mulhi\t%0, %1"[(set_attr "length" "3")]);; Multiply (low)(define_insn "mullo"[(unspec:SI [(match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "register_operand" "r")]UNSPEC_BUILTIN_MULLO)]"""mullo\t%0, %1"[(set_attr "length" "3")]);; Move from Accumulator (high)(define_insn "mvfachi"[(set (match_operand:SI 0 "register_operand" "=r")(unspec:SI [(const_int 0)]UNSPEC_BUILTIN_MVFACHI))]"""mvfachi\t%0"[(set_attr "length" "3")]);; Move from Accumulator (middle)(define_insn "mvfacmi"[(set (match_operand:SI 0 "register_operand" "=r")(unspec:SI [(const_int 0)]UNSPEC_BUILTIN_MVFACMI))]"""mvfacmi\t%0"[(set_attr "length" "3")]);; Move to Accumulator (high)(define_insn "mvtachi"[(unspec_volatile:SI [(match_operand:SI 0 "register_operand" "r")]UNSPEC_BUILTIN_MVTACHI)]"""mvtachi\t%0"[(set_attr "length" "3")]);; Move to Accumulator (low)(define_insn "mvtaclo"[(unspec_volatile:SI [(match_operand:SI 0 "register_operand" "r")]UNSPEC_BUILTIN_MVTACLO)]"""mvtaclo\t%0"[(set_attr "length" "3")]);; Round Accumulator(define_insn "racw"[(unspec_volatile:SI [(match_operand:SI 0 "immediate_operand" "i")]UNSPEC_BUILTIN_RACW)]"""racw\t%0"[(set_attr "length" "3")]);; Repeat multiply and accumulate(define_insn "rmpa"[(unspec:SI [(const_int 0) (reg:SI 1) (reg:SI 2) (reg:SI 3)(reg:SI 4) (reg:SI 5) (reg:SI 6)]UNSPEC_BUILTIN_RMPA)(clobber (reg:SI 1))(clobber (reg:SI 2))(clobber (reg:SI 3))]"""rmpa"[(set_attr "length" "2")(set_attr "timings" "1010")]);;---------- Arithmetic ------------------------;; Byte swap (two 16-bit values).(define_insn "revw"[(set (match_operand:SI 0 "register_operand" "+r")(unspec:SI [(match_operand:SI 1 "register_operand" "r")]UNSPEC_BUILTIN_REVW))]"""revw\t%1, %0"[(set_attr "length" "3")]);; Round to integer.(define_insn "lrintsf2"[(set (match_operand:SI 0 "register_operand" "=r,r")(unspec:SI [(match_operand:SF 1 "rx_compare_operand" "r,Q")]UNSPEC_BUILTIN_ROUND))(clobber (reg:CC CC_REG))]"""round\t%1, %0"[(set_attr "timings" "22,44")(set_attr "length" "3,5")]);; Saturate to 32-bits(define_insn "sat"[(set (match_operand:SI 0 "register_operand" "=r")(unspec:SI [(match_operand:SI 1 "register_operand" "0")]UNSPEC_BUILTIN_SAT))]"""sat\t%0"[(set_attr "length" "2")]);;---------- Control Registers ------------------------;; Clear Processor Status Word(define_insn "clrpsw"[(unspec:SI [(match_operand:SI 0 "immediate_operand" "i")]UNSPEC_BUILTIN_CLRPSW)(clobber (reg:CC CC_REG))]"""clrpsw\t%F0"[(set_attr "length" "2")]);; Set Processor Status Word(define_insn "setpsw"[(unspec:SI [(match_operand:SI 0 "immediate_operand" "i")]UNSPEC_BUILTIN_SETPSW)(clobber (reg:CC CC_REG))]"""setpsw\t%F0"[(set_attr "length" "2")]);; Move from control register(define_insn "mvfc"[(set (match_operand:SI 0 "register_operand" "=r")(unspec:SI [(match_operand:SI 1 "immediate_operand" "i")]UNSPEC_BUILTIN_MVFC))]"""mvfc\t%C1, %0"[(set_attr "length" "3")]);; Move to control register(define_insn "mvtc"[(unspec:SI [(match_operand:SI 0 "immediate_operand" "i,i")(match_operand:SI 1 "nonmemory_operand" "r,i")]UNSPEC_BUILTIN_MVTC)]"""mvtc\t%1, %C0"[(set_attr "length" "3,7")];; Ignore possible clobbering of the comparison flags in the;; PSW register. This is a cc0 target so any cc0 setting;; instruction will always be paired with a cc0 user, without;; the possibility of this instruction being placed in between;; them.);; Move to interrupt priority level(define_insn "mvtipl"[(unspec:SI [(match_operand:SI 0 "immediate_operand" "Uint04")]UNSPEC_BUILTIN_MVTIPL)]"""mvtipl\t%0"[(set_attr "length" "3")]);;---------- Interrupts ------------------------;; Break(define_insn "brk"[(unspec_volatile [(const_int 0)]UNSPEC_BUILTIN_BRK)]"""brk"[(set_attr "length" "1")(set_attr "timings" "66")]);; Interrupt(define_insn "int"[(unspec_volatile:SI [(match_operand:SI 0 "immediate_operand" "i")]UNSPEC_BUILTIN_INT)]"""int\t%0"[(set_attr "length" "3")]);; Wait(define_insn "wait"[(unspec_volatile [(const_int 0)]UNSPEC_BUILTIN_WAIT)]"""wait"[(set_attr "length" "2")]);;---------- CoProcessor Support ------------------------;; FIXME: The instructions are currently commented out because;; the bit patterns have not been finalized, so the assembler;; does not support them. Once they are decided and the assembler;; supports them, enable the instructions here.;; Move from co-processor register(define_insn "mvfcp"[(set (match_operand:SI 0 "register_operand" "=r")(unspec:SI [(match_operand:SI 1 "immediate_operand" "i")(match_operand:SI 2 "immediate_operand" "i")]UNSPEC_BUILTIN_MVFCP))]"""; mvfcp\t%1, %0, %2"[(set_attr "length" "5")]);;---------- Misc ------------------------;; Required by cfglayout.c...(define_insn "nop"[(const_int 0)]"""nop"[(set_attr "length" "1")])
Go to most recent revision | Compare with Previous | Blame | View Log