OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [testsuite/] [ada/] [acats/] [tests/] [cxf/] [cxf3a06.a] - Rev 316

Go to most recent revision | Compare with Previous | Blame | View Log

-- CXF3A06.A 
--
--                             Grant of Unlimited Rights
--
--     Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,
--     F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained 
--     unlimited rights in the software and documentation contained herein.
--     Unlimited rights are defined in DFAR 252.227-7013(a)(19).  By making 
--     this public release, the Government intends to confer upon all 
--     recipients unlimited rights  equal to those held by the Government.  
--     These rights include rights to use, duplicate, release or disclose the 
--     released technical data and computer software in whole or in part, in 
--     any manner and for any purpose whatsoever, and to have or permit others 
--     to do so.
--
--                                    DISCLAIMER
--
--     ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR
--     DISCLOSED ARE AS IS.  THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED 
--     WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE
--     SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE 
--     OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A
--     PARTICULAR PURPOSE OF SAID MATERIAL.
--*
--
-- OBJECTIVE:
--      Check that Ada.Text_IO.Editing.Put and Ada.Text_IO.Put have the same
--      effect.  
--
-- TEST DESCRIPTION:
--      This test is structured using tables of data, consisting of
--      numerical values, picture strings, and expected image
--      result strings.  These data tables are found in package FXF3A00.
--      
--      The testing approach used in this test is that of writing edited
--      output data to a text file, using two different approaches.  First,
--      Ada.Text_IO.Put is used, with a call to an instantiated version of
--      Function Image supplied as the actual for parameter Item.  The 
--      second approach is to use a version of Function Put from an 
--      instantiation of Ada.Text_IO.Editing.Decimal_Output, with the
--      appropriate parameters for decimal data, picture, and format
--      specific parameters.  A call to New_Line follows each Put, so that
--      each entry is placed on a separate line in the text file.
--      
--      Edited output for decimal data with two decimal places is in the 
--      first loop, and once the data has been written to the file, the 
--      text file is closed, then opened in In_File mode.  The edited
--      output data is read from the file, and data on successive lines
--      is compared with the expected edited output result.  The edited
--      output data produced by both of the Put procedures should be
--      identical.
--      
--      This process is repeated for decimal data with no decimal places.
--      The file is reopened in Append_File mode, and the edited output
--      data is added to the file in the same manner as described above.
--      The file is closed, and reopened to verify the data written.  
--      The data written above (with two decimal places) is skipped, then
--      the data to be verified is extracted as above and verified against
--      the expected edited output string values.
--      
-- APPLICABILITY CRITERIA: 
--      This test is applicable only to implementations that support
--      external text files.
--
-- TEST FILES:
--      The following files comprise this test:
--
--         FXF3A00.A   (foundation code)
--      => CXF3A06.A
--
--       
-- CHANGE HISTORY:
--      26 JAN 95   SAIC    Initial prerelease version.
--      26 FEB 97   PWB.CTA Made input buffers sufficiently long
--                          and removed code depending on shorter buffers
--!

with FXF3A00;
with Ada.Text_IO.Editing;
with Report;

procedure CXF3A06 is
   use Ada;
begin

   Report.Test ("CXF3A06", "Check that Ada.Text_IO.Editing.Put and " &
                           "Ada.Text_IO.Put have the same effect");

   Test_for_Text_IO_Support:
   declare
      Text_File     : Ada.Text_IO.File_Type;
      Text_Filename : constant String := Report.Legal_File_Name(1);
   begin

      -- Use_Error will be raised if Text_IO operations or external files
      -- are not supported.

      Text_IO.Create (Text_File, Text_IO.Out_File, Text_Filename);

      Test_Block:
      declare
         use Ada.Text_IO;

         -- Instantiate the Decimal_Output generic package for two
         -- different decimal data types.

         package Pack_2DP is          -- Uses decimal type with delta 0.01.
           new Editing.Decimal_Output(FXF3A00.Decimal_Type_2DP);

         package Pack_NDP is          -- Uses decimal type with delta 1.0.
           new Editing.Decimal_Output(Num => FXF3A00.Decimal_Type_NDP,
                                      Default_Currency   => "$",
                                      Default_Fill       => '*',
                                      Default_Separator  => ',',
                                      Default_Radix_Mark => '.');

         TC_Picture    : Editing.Picture;
         TC_Start_Loop : constant :=  1;
         TC_End_Loop_1 : constant := FXF3A00.Number_Of_2DP_Items -    -- 20-10
                                     FXF3A00.Number_Of_Foreign_Strings;
         TC_End_Loop_2 : constant := FXF3A00.Number_Of_NDP_Items;     -- 12
         TC_Offset     : constant := FXF3A00.Number_Of_2DP_Items;     -- 20

         TC_String_1, TC_String_2 : String(1..255) := (others => ' ');
         TC_Last_1,   TC_Last_2   : Natural := 0;

      begin

         -- Use the two versions of Put, for data with two decimal points,
         -- to write edited output strings to the text file.  Use a separate
         -- line for each string entry.

         for i in TC_Start_Loop..TC_End_Loop_1 loop               -- 1..10

            -- Create the picture object from the picture string.

            TC_Picture := Editing.To_Picture(FXF3A00.Valid_Strings(i).all);

            -- Use the Text_IO version of Put to place an edited output 
            -- string into a text file. Use default parameters in the call
            -- to Image for Currency, Fill, Separator, and Radix_Mark.

            Text_IO.Put(Text_File,
                        Pack_2DP.Image(Item => FXF3A00.Data_With_2DP(i),
                                       Pic  => TC_Picture));
            Text_IO.New_Line(Text_File);

            -- Use the version of Put from the instantiation of 
            -- Decimal_Output to place an edited output string on a separate
            -- line of the Text_File.  Use default parameters for Currency,
            -- Fill, Separator, and Radix_Mark.

            Pack_2DP.Put(File => Text_File,
                         Item => FXF3A00.Data_With_2DP(i),
                         Pic  => TC_Picture);
            Text_IO.New_Line(Text_File);

         end loop;

         Text_IO.Close(Text_File);

         -- Reopen the text file in In_File mode, and verify the edited
         -- output found on consecutive lines of the file.

         Text_IO.Open(Text_File, Text_IO.In_File, Text_Filename);

         for i in TC_Start_Loop..TC_End_Loop_1 loop
               -- Read successive lines in the text file.
               Text_IO.Get_Line(Text_File, TC_String_1, TC_Last_1);
               Text_IO.Get_Line(Text_File, TC_String_2, TC_Last_2);

            -- Compare the two strings for equality with the expected edited
            -- output result.  Failure results if strings don't match, or if
            -- a reading error occurred from the attempted Get_Line resulting 
            -- from an improperly formed edited output string.

            if TC_String_1(1..TC_Last_1) /= FXF3A00.Edited_Output(i).all  or 
               TC_String_2(1..TC_Last_2) /= FXF3A00.Edited_Output(i).all
            then
               Report.Failed("Failed comparison of two edited output "    &
                             "strings from data with two decimal points " &
                             ", loop number = " & Integer'Image(i));
            end if;
         end loop;

         Text_IO.Close(Text_File);

         -- Reopen the text file in Append_File mode.
         -- Use the two versions of Put, for data with no decimal points,
         -- to write edited output strings to the text file.  Use a separate
         -- line for each string entry.

         Text_IO.Open(Text_File, Text_IO.Append_File, Text_Filename);

         for i in TC_Start_Loop..TC_End_Loop_2 loop               -- 1..12

            -- Create the picture object from the picture string specific to
            -- data with no decimal points.  Use appropriate offset into the
            -- Valid_Strings array to account for the string data used above.

            TC_Picture := 
              Editing.To_Picture(FXF3A00.Valid_Strings(i+TC_End_Loop_1).all);

            -- Use the Text_IO version of Put to place an edited output 
            -- string into a text file.  Use non-default parameters in the
            -- call to Image for Currency, Fill, Separator, and Radix_Mark.

            Text_IO.Put(Text_File,
                        Pack_NDP.Image(Item => FXF3A00.Data_With_NDP(i),
                                       Pic  => TC_Picture,
                                       Currency   => "$",
                                       Fill       => '*',
                                       Separator  => ',',
                                       Radix_Mark => '.'));
            Text_IO.New_Line(Text_File);

            -- Use the version of Put from the instantiation of 
            -- Decimal_Output to place an edited output string on a separate
            -- line of the Text_File.  Use non-default parameters for
            -- Currency, Fill, Separator, and Radix_Mark.

            Pack_NDP.Put(File       => Text_File,
                         Item       => FXF3A00.Data_With_NDP(i),
                         Pic        => TC_Picture,
                         Currency   => "$",
                         Fill       => '*',
                         Separator  => ',',
                         Radix_Mark => '.');
            Text_IO.New_Line(Text_File);

         end loop;

         Text_IO.Close(Text_File);

         -- Reopen the text file in In_File mode, and verify the edited
         -- output found on consecutive lines of the file.

         Text_IO.Open(Text_File, Text_IO.In_File, Text_Filename);

         -- Read past data that has been verified above, skipping two lines 
         -- of the data file for each loop.

         for i in TC_Start_Loop..TC_End_Loop_1 loop               -- 1..10
            Text_IO.Skip_Line(Text_File, 2);
         end loop;

         -- Verify the last data set that was written to the file.

         for i in TC_Start_Loop..TC_End_Loop_2 loop               -- 1..12
               Text_IO.Get_Line(Text_File, TC_String_1, TC_Last_1);
               Text_IO.Get_Line(Text_File, TC_String_2, TC_Last_2);

            -- Compare the two strings for equality with the expected edited
            -- output result.  Failure results if strings don't match, or if
            -- a reading error occurred from the attempted Get_Line resulting 
            -- from an improperly formed edited output string.

            if TC_String_1(1..TC_Last_1)              /= 
               FXF3A00.Edited_Output(i+TC_Offset).all    or 
               TC_String_2(1..TC_Last_2)              /= 
               FXF3A00.Edited_Output(i+TC_Offset).all
            then
               Report.Failed("Failed comparison of two edited output "   &
                             "strings from data with no decimal points " &
                             ", loop number = " & 
                             Integer'Image(i));
            end if;

         end loop;

      exception
         when others => Report.Failed("Exception raised in Test_Block");
      end Test_Block;

      -- Delete the external file.
      if Text_IO.Is_Open (Text_File) then
         Text_IO.Delete (Text_File);
      else
         Text_IO.Open (Text_File, Text_IO.In_File, Text_Filename);
         Text_IO.Delete (Text_File);
      end if;

   exception

      -- Since Use_Error can be raised if, for the specified mode,
      -- the environment does not support Text_IO operations, the 
      -- following handlers are included:

      when Text_IO.Use_Error  =>
         Report.Not_Applicable ("Use_Error raised on Text_IO Create");

      when Text_IO.Name_Error =>
         Report.Not_Applicable ("Name_Error raised on Text_IO Create");

      when others             =>
         Report.Failed ("Unexpected exception raised in Create block");

   end Test_for_Text_IO_Support;

   Report.Result;

end CXF3A06;

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.