URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gcc-4.5.1/] [gcc/] [tree-ssa-loop-manip.c] - Rev 328
Go to most recent revision | Compare with Previous | Blame | View Log
/* High-level loop manipulation functions. Copyright (C) 2004, 2005, 2006, 2007, 2008, 2010 Free Software Foundation, Inc. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "tree.h" #include "rtl.h" #include "tm_p.h" #include "hard-reg-set.h" #include "basic-block.h" #include "output.h" #include "diagnostic.h" #include "tree-flow.h" #include "tree-dump.h" #include "timevar.h" #include "cfgloop.h" #include "tree-pass.h" #include "cfglayout.h" #include "tree-scalar-evolution.h" #include "params.h" #include "tree-inline.h" #include "langhooks.h" /* Creates an induction variable with value BASE + STEP * iteration in LOOP. It is expected that neither BASE nor STEP are shared with other expressions (unless the sharing rules allow this). Use VAR as a base var_decl for it (if NULL, a new temporary will be created). The increment will occur at INCR_POS (after it if AFTER is true, before it otherwise). INCR_POS and AFTER can be computed using standard_iv_increment_position. The ssa versions of the variable before and after increment will be stored in VAR_BEFORE and VAR_AFTER (unless they are NULL). */ void create_iv (tree base, tree step, tree var, struct loop *loop, gimple_stmt_iterator *incr_pos, bool after, tree *var_before, tree *var_after) { gimple stmt; tree initial, step1; gimple_seq stmts; tree vb, va; enum tree_code incr_op = PLUS_EXPR; edge pe = loop_preheader_edge (loop); if (!var) { var = create_tmp_var (TREE_TYPE (base), "ivtmp"); add_referenced_var (var); } vb = make_ssa_name (var, NULL); if (var_before) *var_before = vb; va = make_ssa_name (var, NULL); if (var_after) *var_after = va; /* For easier readability of the created code, produce MINUS_EXPRs when suitable. */ if (TREE_CODE (step) == INTEGER_CST) { if (TYPE_UNSIGNED (TREE_TYPE (step))) { step1 = fold_build1 (NEGATE_EXPR, TREE_TYPE (step), step); if (tree_int_cst_lt (step1, step)) { incr_op = MINUS_EXPR; step = step1; } } else { bool ovf; if (!tree_expr_nonnegative_warnv_p (step, &ovf) && may_negate_without_overflow_p (step)) { incr_op = MINUS_EXPR; step = fold_build1 (NEGATE_EXPR, TREE_TYPE (step), step); } } } if (POINTER_TYPE_P (TREE_TYPE (base))) { if (TREE_CODE (base) == ADDR_EXPR) mark_addressable (TREE_OPERAND (base, 0)); step = fold_convert (sizetype, step); if (incr_op == MINUS_EXPR) step = fold_build1 (NEGATE_EXPR, sizetype, step); incr_op = POINTER_PLUS_EXPR; } /* Gimplify the step if necessary. We put the computations in front of the loop (i.e. the step should be loop invariant). */ step = force_gimple_operand (step, &stmts, true, NULL_TREE); if (stmts) gsi_insert_seq_on_edge_immediate (pe, stmts); stmt = gimple_build_assign_with_ops (incr_op, va, vb, step); if (after) gsi_insert_after (incr_pos, stmt, GSI_NEW_STMT); else gsi_insert_before (incr_pos, stmt, GSI_NEW_STMT); initial = force_gimple_operand (base, &stmts, true, var); if (stmts) gsi_insert_seq_on_edge_immediate (pe, stmts); stmt = create_phi_node (vb, loop->header); SSA_NAME_DEF_STMT (vb) = stmt; add_phi_arg (stmt, initial, loop_preheader_edge (loop), UNKNOWN_LOCATION); add_phi_arg (stmt, va, loop_latch_edge (loop), UNKNOWN_LOCATION); } /* Add exit phis for the USE on EXIT. */ static void add_exit_phis_edge (basic_block exit, tree use) { gimple phi, def_stmt = SSA_NAME_DEF_STMT (use); basic_block def_bb = gimple_bb (def_stmt); struct loop *def_loop; edge e; edge_iterator ei; /* Check that some of the edges entering the EXIT block exits a loop in that USE is defined. */ FOR_EACH_EDGE (e, ei, exit->preds) { def_loop = find_common_loop (def_bb->loop_father, e->src->loop_father); if (!flow_bb_inside_loop_p (def_loop, e->dest)) break; } if (!e) return; phi = create_phi_node (use, exit); create_new_def_for (gimple_phi_result (phi), phi, gimple_phi_result_ptr (phi)); FOR_EACH_EDGE (e, ei, exit->preds) add_phi_arg (phi, use, e, UNKNOWN_LOCATION); } /* Add exit phis for VAR that is used in LIVEIN. Exits of the loops are stored in EXITS. */ static void add_exit_phis_var (tree var, bitmap livein, bitmap exits) { bitmap def; unsigned index; basic_block def_bb = gimple_bb (SSA_NAME_DEF_STMT (var)); bitmap_iterator bi; if (is_gimple_reg (var)) bitmap_clear_bit (livein, def_bb->index); else bitmap_set_bit (livein, def_bb->index); def = BITMAP_ALLOC (NULL); bitmap_set_bit (def, def_bb->index); compute_global_livein (livein, def); BITMAP_FREE (def); EXECUTE_IF_AND_IN_BITMAP (exits, livein, 0, index, bi) { add_exit_phis_edge (BASIC_BLOCK (index), var); } } /* Add exit phis for the names marked in NAMES_TO_RENAME. Exits of the loops are stored in EXITS. Sets of blocks where the ssa names are used are stored in USE_BLOCKS. */ static void add_exit_phis (bitmap names_to_rename, bitmap *use_blocks, bitmap loop_exits) { unsigned i; bitmap_iterator bi; EXECUTE_IF_SET_IN_BITMAP (names_to_rename, 0, i, bi) { add_exit_phis_var (ssa_name (i), use_blocks[i], loop_exits); } } /* Returns a bitmap of all loop exit edge targets. */ static bitmap get_loops_exits (void) { bitmap exits = BITMAP_ALLOC (NULL); basic_block bb; edge e; edge_iterator ei; FOR_EACH_BB (bb) { FOR_EACH_EDGE (e, ei, bb->preds) if (e->src != ENTRY_BLOCK_PTR && !flow_bb_inside_loop_p (e->src->loop_father, bb)) { bitmap_set_bit (exits, bb->index); break; } } return exits; } /* For USE in BB, if it is used outside of the loop it is defined in, mark it for rewrite. Record basic block BB where it is used to USE_BLOCKS. Record the ssa name index to NEED_PHIS bitmap. */ static void find_uses_to_rename_use (basic_block bb, tree use, bitmap *use_blocks, bitmap need_phis) { unsigned ver; basic_block def_bb; struct loop *def_loop; if (TREE_CODE (use) != SSA_NAME) return; /* We don't need to keep virtual operands in loop-closed form. */ if (!is_gimple_reg (use)) return; ver = SSA_NAME_VERSION (use); def_bb = gimple_bb (SSA_NAME_DEF_STMT (use)); if (!def_bb) return; def_loop = def_bb->loop_father; /* If the definition is not inside a loop, it is not interesting. */ if (!loop_outer (def_loop)) return; /* If the use is not outside of the loop it is defined in, it is not interesting. */ if (flow_bb_inside_loop_p (def_loop, bb)) return; if (!use_blocks[ver]) use_blocks[ver] = BITMAP_ALLOC (NULL); bitmap_set_bit (use_blocks[ver], bb->index); bitmap_set_bit (need_phis, ver); } /* For uses in STMT, mark names that are used outside of the loop they are defined to rewrite. Record the set of blocks in that the ssa names are defined to USE_BLOCKS and the ssa names themselves to NEED_PHIS. */ static void find_uses_to_rename_stmt (gimple stmt, bitmap *use_blocks, bitmap need_phis) { ssa_op_iter iter; tree var; basic_block bb = gimple_bb (stmt); if (is_gimple_debug (stmt)) return; FOR_EACH_SSA_TREE_OPERAND (var, stmt, iter, SSA_OP_ALL_USES) find_uses_to_rename_use (bb, var, use_blocks, need_phis); } /* Marks names that are used in BB and outside of the loop they are defined in for rewrite. Records the set of blocks in that the ssa names are defined to USE_BLOCKS. Record the SSA names that will need exit PHIs in NEED_PHIS. */ static void find_uses_to_rename_bb (basic_block bb, bitmap *use_blocks, bitmap need_phis) { gimple_stmt_iterator bsi; edge e; edge_iterator ei; FOR_EACH_EDGE (e, ei, bb->succs) for (bsi = gsi_start_phis (e->dest); !gsi_end_p (bsi); gsi_next (&bsi)) find_uses_to_rename_use (bb, PHI_ARG_DEF_FROM_EDGE (gsi_stmt (bsi), e), use_blocks, need_phis); for (bsi = gsi_start_bb (bb); !gsi_end_p (bsi); gsi_next (&bsi)) find_uses_to_rename_stmt (gsi_stmt (bsi), use_blocks, need_phis); } /* Marks names that are used outside of the loop they are defined in for rewrite. Records the set of blocks in that the ssa names are defined to USE_BLOCKS. If CHANGED_BBS is not NULL, scan only blocks in this set. */ static void find_uses_to_rename (bitmap changed_bbs, bitmap *use_blocks, bitmap need_phis) { basic_block bb; unsigned index; bitmap_iterator bi; if (changed_bbs && !bitmap_empty_p (changed_bbs)) { EXECUTE_IF_SET_IN_BITMAP (changed_bbs, 0, index, bi) { find_uses_to_rename_bb (BASIC_BLOCK (index), use_blocks, need_phis); } } else { FOR_EACH_BB (bb) { find_uses_to_rename_bb (bb, use_blocks, need_phis); } } } /* Rewrites the program into a loop closed ssa form -- i.e. inserts extra phi nodes to ensure that no variable is used outside the loop it is defined in. This strengthening of the basic ssa form has several advantages: 1) Updating it during unrolling/peeling/versioning is trivial, since we do not need to care about the uses outside of the loop. 2) The behavior of all uses of an induction variable is the same. Without this, you need to distinguish the case when the variable is used outside of the loop it is defined in, for example for (i = 0; i < 100; i++) { for (j = 0; j < 100; j++) { k = i + j; use1 (k); } use2 (k); } Looking from the outer loop with the normal SSA form, the first use of k is not well-behaved, while the second one is an induction variable with base 99 and step 1. If CHANGED_BBS is not NULL, we look for uses outside loops only in the basic blocks in this set. UPDATE_FLAG is used in the call to update_ssa. See TODO_update_ssa* for documentation. */ void rewrite_into_loop_closed_ssa (bitmap changed_bbs, unsigned update_flag) { bitmap loop_exits; bitmap *use_blocks; unsigned i, old_num_ssa_names; bitmap names_to_rename; loops_state_set (LOOP_CLOSED_SSA); if (number_of_loops () <= 1) return; loop_exits = get_loops_exits (); names_to_rename = BITMAP_ALLOC (NULL); /* If the pass has caused the SSA form to be out-of-date, update it now. */ update_ssa (update_flag); old_num_ssa_names = num_ssa_names; use_blocks = XCNEWVEC (bitmap, old_num_ssa_names); /* Find the uses outside loops. */ find_uses_to_rename (changed_bbs, use_blocks, names_to_rename); /* Add the PHI nodes on exits of the loops for the names we need to rewrite. */ add_exit_phis (names_to_rename, use_blocks, loop_exits); for (i = 0; i < old_num_ssa_names; i++) BITMAP_FREE (use_blocks[i]); free (use_blocks); BITMAP_FREE (loop_exits); BITMAP_FREE (names_to_rename); /* Fix up all the names found to be used outside their original loops. */ update_ssa (TODO_update_ssa); } /* Check invariants of the loop closed ssa form for the USE in BB. */ static void check_loop_closed_ssa_use (basic_block bb, tree use) { gimple def; basic_block def_bb; if (TREE_CODE (use) != SSA_NAME || !is_gimple_reg (use)) return; def = SSA_NAME_DEF_STMT (use); def_bb = gimple_bb (def); gcc_assert (!def_bb || flow_bb_inside_loop_p (def_bb->loop_father, bb)); } /* Checks invariants of loop closed ssa form in statement STMT in BB. */ static void check_loop_closed_ssa_stmt (basic_block bb, gimple stmt) { ssa_op_iter iter; tree var; if (is_gimple_debug (stmt)) return; FOR_EACH_SSA_TREE_OPERAND (var, stmt, iter, SSA_OP_ALL_USES) check_loop_closed_ssa_use (bb, var); } /* Checks that invariants of the loop closed ssa form are preserved. */ void verify_loop_closed_ssa (void) { basic_block bb; gimple_stmt_iterator bsi; gimple phi; edge e; edge_iterator ei; if (number_of_loops () <= 1) return; verify_ssa (false); FOR_EACH_BB (bb) { for (bsi = gsi_start_phis (bb); !gsi_end_p (bsi); gsi_next (&bsi)) { phi = gsi_stmt (bsi); FOR_EACH_EDGE (e, ei, bb->preds) check_loop_closed_ssa_use (e->src, PHI_ARG_DEF_FROM_EDGE (phi, e)); } for (bsi = gsi_start_bb (bb); !gsi_end_p (bsi); gsi_next (&bsi)) check_loop_closed_ssa_stmt (bb, gsi_stmt (bsi)); } } /* Split loop exit edge EXIT. The things are a bit complicated by a need to preserve the loop closed ssa form. The newly created block is returned. */ basic_block split_loop_exit_edge (edge exit) { basic_block dest = exit->dest; basic_block bb = split_edge (exit); gimple phi, new_phi; tree new_name, name; use_operand_p op_p; gimple_stmt_iterator psi; source_location locus; for (psi = gsi_start_phis (dest); !gsi_end_p (psi); gsi_next (&psi)) { phi = gsi_stmt (psi); op_p = PHI_ARG_DEF_PTR_FROM_EDGE (phi, single_succ_edge (bb)); locus = gimple_phi_arg_location_from_edge (phi, single_succ_edge (bb)); name = USE_FROM_PTR (op_p); /* If the argument of the PHI node is a constant, we do not need to keep it inside loop. */ if (TREE_CODE (name) != SSA_NAME) continue; /* Otherwise create an auxiliary phi node that will copy the value of the SSA name out of the loop. */ new_name = duplicate_ssa_name (name, NULL); new_phi = create_phi_node (new_name, bb); SSA_NAME_DEF_STMT (new_name) = new_phi; add_phi_arg (new_phi, name, exit, locus); SET_USE (op_p, new_name); } return bb; } /* Returns the basic block in that statements should be emitted for induction variables incremented at the end of the LOOP. */ basic_block ip_end_pos (struct loop *loop) { return loop->latch; } /* Returns the basic block in that statements should be emitted for induction variables incremented just before exit condition of a LOOP. */ basic_block ip_normal_pos (struct loop *loop) { gimple last; basic_block bb; edge exit; if (!single_pred_p (loop->latch)) return NULL; bb = single_pred (loop->latch); last = last_stmt (bb); if (!last || gimple_code (last) != GIMPLE_COND) return NULL; exit = EDGE_SUCC (bb, 0); if (exit->dest == loop->latch) exit = EDGE_SUCC (bb, 1); if (flow_bb_inside_loop_p (loop, exit->dest)) return NULL; return bb; } /* Stores the standard position for induction variable increment in LOOP (just before the exit condition if it is available and latch block is empty, end of the latch block otherwise) to BSI. INSERT_AFTER is set to true if the increment should be inserted after *BSI. */ void standard_iv_increment_position (struct loop *loop, gimple_stmt_iterator *bsi, bool *insert_after) { basic_block bb = ip_normal_pos (loop), latch = ip_end_pos (loop); gimple last = last_stmt (latch); if (!bb || (last && gimple_code (last) != GIMPLE_LABEL)) { *bsi = gsi_last_bb (latch); *insert_after = true; } else { *bsi = gsi_last_bb (bb); *insert_after = false; } } /* Copies phi node arguments for duplicated blocks. The index of the first duplicated block is FIRST_NEW_BLOCK. */ static void copy_phi_node_args (unsigned first_new_block) { unsigned i; for (i = first_new_block; i < (unsigned) last_basic_block; i++) BASIC_BLOCK (i)->flags |= BB_DUPLICATED; for (i = first_new_block; i < (unsigned) last_basic_block; i++) add_phi_args_after_copy_bb (BASIC_BLOCK (i)); for (i = first_new_block; i < (unsigned) last_basic_block; i++) BASIC_BLOCK (i)->flags &= ~BB_DUPLICATED; } /* The same as cfgloopmanip.c:duplicate_loop_to_header_edge, but also updates the PHI nodes at start of the copied region. In order to achieve this, only loops whose exits all lead to the same location are handled. Notice that we do not completely update the SSA web after duplication. The caller is responsible for calling update_ssa after the loop has been duplicated. */ bool gimple_duplicate_loop_to_header_edge (struct loop *loop, edge e, unsigned int ndupl, sbitmap wont_exit, edge orig, VEC (edge, heap) **to_remove, int flags) { unsigned first_new_block; if (!loops_state_satisfies_p (LOOPS_HAVE_SIMPLE_LATCHES)) return false; if (!loops_state_satisfies_p (LOOPS_HAVE_PREHEADERS)) return false; #ifdef ENABLE_CHECKING if (loops_state_satisfies_p (LOOP_CLOSED_SSA)) verify_loop_closed_ssa (); #endif first_new_block = last_basic_block; if (!duplicate_loop_to_header_edge (loop, e, ndupl, wont_exit, orig, to_remove, flags)) return false; /* Readd the removed phi args for e. */ flush_pending_stmts (e); /* Copy the phi node arguments. */ copy_phi_node_args (first_new_block); scev_reset (); return true; } /* Returns true if we can unroll LOOP FACTOR times. Number of iterations of the loop is returned in NITER. */ bool can_unroll_loop_p (struct loop *loop, unsigned factor, struct tree_niter_desc *niter) { edge exit; /* Check whether unrolling is possible. We only want to unroll loops for that we are able to determine number of iterations. We also want to split the extra iterations of the loop from its end, therefore we require that the loop has precisely one exit. */ exit = single_dom_exit (loop); if (!exit) return false; if (!number_of_iterations_exit (loop, exit, niter, false) || niter->cmp == ERROR_MARK /* Scalar evolutions analysis might have copy propagated the abnormal ssa names into these expressions, hence emitting the computations based on them during loop unrolling might create overlapping life ranges for them, and failures in out-of-ssa. */ || contains_abnormal_ssa_name_p (niter->may_be_zero) || contains_abnormal_ssa_name_p (niter->control.base) || contains_abnormal_ssa_name_p (niter->control.step) || contains_abnormal_ssa_name_p (niter->bound)) return false; /* And of course, we must be able to duplicate the loop. */ if (!can_duplicate_loop_p (loop)) return false; /* The final loop should be small enough. */ if (tree_num_loop_insns (loop, &eni_size_weights) * factor > (unsigned) PARAM_VALUE (PARAM_MAX_UNROLLED_INSNS)) return false; return true; } /* Determines the conditions that control execution of LOOP unrolled FACTOR times. DESC is number of iterations of LOOP. ENTER_COND is set to condition that must be true if the main loop can be entered. EXIT_BASE, EXIT_STEP, EXIT_CMP and EXIT_BOUND are set to values describing how the exit from the unrolled loop should be controlled. */ static void determine_exit_conditions (struct loop *loop, struct tree_niter_desc *desc, unsigned factor, tree *enter_cond, tree *exit_base, tree *exit_step, enum tree_code *exit_cmp, tree *exit_bound) { gimple_seq stmts; tree base = desc->control.base; tree step = desc->control.step; tree bound = desc->bound; tree type = TREE_TYPE (step); tree bigstep, delta; tree min = lower_bound_in_type (type, type); tree max = upper_bound_in_type (type, type); enum tree_code cmp = desc->cmp; tree cond = boolean_true_node, assum; /* For pointers, do the arithmetics in the type of step (sizetype). */ base = fold_convert (type, base); bound = fold_convert (type, bound); *enter_cond = boolean_false_node; *exit_base = NULL_TREE; *exit_step = NULL_TREE; *exit_cmp = ERROR_MARK; *exit_bound = NULL_TREE; gcc_assert (cmp != ERROR_MARK); /* We only need to be correct when we answer question "Do at least FACTOR more iterations remain?" in the unrolled loop. Thus, transforming BASE + STEP * i <> BOUND to BASE + STEP * i < BOUND is ok. */ if (cmp == NE_EXPR) { if (tree_int_cst_sign_bit (step)) cmp = GT_EXPR; else cmp = LT_EXPR; } else if (cmp == LT_EXPR) { gcc_assert (!tree_int_cst_sign_bit (step)); } else if (cmp == GT_EXPR) { gcc_assert (tree_int_cst_sign_bit (step)); } else gcc_unreachable (); /* The main body of the loop may be entered iff: 1) desc->may_be_zero is false. 2) it is possible to check that there are at least FACTOR iterations of the loop, i.e., BOUND - step * FACTOR does not overflow. 3) # of iterations is at least FACTOR */ if (!integer_zerop (desc->may_be_zero)) cond = fold_build2 (TRUTH_AND_EXPR, boolean_type_node, invert_truthvalue (desc->may_be_zero), cond); bigstep = fold_build2 (MULT_EXPR, type, step, build_int_cst_type (type, factor)); delta = fold_build2 (MINUS_EXPR, type, bigstep, step); if (cmp == LT_EXPR) assum = fold_build2 (GE_EXPR, boolean_type_node, bound, fold_build2 (PLUS_EXPR, type, min, delta)); else assum = fold_build2 (LE_EXPR, boolean_type_node, bound, fold_build2 (PLUS_EXPR, type, max, delta)); cond = fold_build2 (TRUTH_AND_EXPR, boolean_type_node, assum, cond); bound = fold_build2 (MINUS_EXPR, type, bound, delta); assum = fold_build2 (cmp, boolean_type_node, base, bound); cond = fold_build2 (TRUTH_AND_EXPR, boolean_type_node, assum, cond); cond = force_gimple_operand (unshare_expr (cond), &stmts, false, NULL_TREE); if (stmts) gsi_insert_seq_on_edge_immediate (loop_preheader_edge (loop), stmts); /* cond now may be a gimple comparison, which would be OK, but also any other gimple rhs (say a && b). In this case we need to force it to operand. */ if (!is_gimple_condexpr (cond)) { cond = force_gimple_operand (cond, &stmts, true, NULL_TREE); if (stmts) gsi_insert_seq_on_edge_immediate (loop_preheader_edge (loop), stmts); } *enter_cond = cond; base = force_gimple_operand (unshare_expr (base), &stmts, true, NULL_TREE); if (stmts) gsi_insert_seq_on_edge_immediate (loop_preheader_edge (loop), stmts); bound = force_gimple_operand (unshare_expr (bound), &stmts, true, NULL_TREE); if (stmts) gsi_insert_seq_on_edge_immediate (loop_preheader_edge (loop), stmts); *exit_base = base; *exit_step = bigstep; *exit_cmp = cmp; *exit_bound = bound; } /* Scales the frequencies of all basic blocks in LOOP that are strictly dominated by BB by NUM/DEN. */ static void scale_dominated_blocks_in_loop (struct loop *loop, basic_block bb, int num, int den) { basic_block son; if (den == 0) return; for (son = first_dom_son (CDI_DOMINATORS, bb); son; son = next_dom_son (CDI_DOMINATORS, son)) { if (!flow_bb_inside_loop_p (loop, son)) continue; scale_bbs_frequencies_int (&son, 1, num, den); scale_dominated_blocks_in_loop (loop, son, num, den); } } /* Unroll LOOP FACTOR times. DESC describes number of iterations of LOOP. EXIT is the exit of the loop to that DESC corresponds. If N is number of iterations of the loop and MAY_BE_ZERO is the condition under that loop exits in the first iteration even if N != 0, while (1) { x = phi (init, next); pre; if (st) break; post; } becomes (with possibly the exit conditions formulated a bit differently, avoiding the need to create a new iv): if (MAY_BE_ZERO || N < FACTOR) goto rest; do { x = phi (init, next); pre; post; pre; post; ... pre; post; N -= FACTOR; } while (N >= FACTOR); rest: init' = phi (init, x); while (1) { x = phi (init', next); pre; if (st) break; post; } Before the loop is unrolled, TRANSFORM is called for it (only for the unrolled loop, but not for its versioned copy). DATA is passed to TRANSFORM. */ /* Probability in % that the unrolled loop is entered. Just a guess. */ #define PROB_UNROLLED_LOOP_ENTERED 90 void tree_transform_and_unroll_loop (struct loop *loop, unsigned factor, edge exit, struct tree_niter_desc *desc, transform_callback transform, void *data) { gimple exit_if; tree ctr_before, ctr_after; tree enter_main_cond, exit_base, exit_step, exit_bound; enum tree_code exit_cmp; gimple phi_old_loop, phi_new_loop, phi_rest; gimple_stmt_iterator psi_old_loop, psi_new_loop; tree init, next, new_init, var; struct loop *new_loop; basic_block rest, exit_bb; edge old_entry, new_entry, old_latch, precond_edge, new_exit; edge new_nonexit, e; gimple_stmt_iterator bsi; use_operand_p op; bool ok; unsigned est_niter, prob_entry, scale_unrolled, scale_rest, freq_e, freq_h; unsigned new_est_niter, i, prob; unsigned irr = loop_preheader_edge (loop)->flags & EDGE_IRREDUCIBLE_LOOP; sbitmap wont_exit; VEC (edge, heap) *to_remove = NULL; est_niter = expected_loop_iterations (loop); determine_exit_conditions (loop, desc, factor, &enter_main_cond, &exit_base, &exit_step, &exit_cmp, &exit_bound); /* Let us assume that the unrolled loop is quite likely to be entered. */ if (integer_nonzerop (enter_main_cond)) prob_entry = REG_BR_PROB_BASE; else prob_entry = PROB_UNROLLED_LOOP_ENTERED * REG_BR_PROB_BASE / 100; /* The values for scales should keep profile consistent, and somewhat close to correct. TODO: The current value of SCALE_REST makes it appear that the loop that is created by splitting the remaining iterations of the unrolled loop is executed the same number of times as the original loop, and with the same frequencies, which is obviously wrong. This does not appear to cause problems, so we do not bother with fixing it for now. To make the profile correct, we would need to change the probability of the exit edge of the loop, and recompute the distribution of frequencies in its body because of this change (scale the frequencies of blocks before and after the exit by appropriate factors). */ scale_unrolled = prob_entry; scale_rest = REG_BR_PROB_BASE; new_loop = loop_version (loop, enter_main_cond, NULL, prob_entry, scale_unrolled, scale_rest, true); gcc_assert (new_loop != NULL); update_ssa (TODO_update_ssa); /* Determine the probability of the exit edge of the unrolled loop. */ new_est_niter = est_niter / factor; /* Without profile feedback, loops for that we do not know a better estimate are assumed to roll 10 times. When we unroll such loop, it appears to roll too little, and it may even seem to be cold. To avoid this, we ensure that the created loop appears to roll at least 5 times (but at most as many times as before unrolling). */ if (new_est_niter < 5) { if (est_niter < 5) new_est_niter = est_niter; else new_est_niter = 5; } /* Prepare the cfg and update the phi nodes. Move the loop exit to the loop latch (and make its condition dummy, for the moment). */ rest = loop_preheader_edge (new_loop)->src; precond_edge = single_pred_edge (rest); split_edge (loop_latch_edge (loop)); exit_bb = single_pred (loop->latch); /* Since the exit edge will be removed, the frequency of all the blocks in the loop that are dominated by it must be scaled by 1 / (1 - exit->probability). */ scale_dominated_blocks_in_loop (loop, exit->src, REG_BR_PROB_BASE, REG_BR_PROB_BASE - exit->probability); bsi = gsi_last_bb (exit_bb); exit_if = gimple_build_cond (EQ_EXPR, integer_zero_node, integer_zero_node, NULL_TREE, NULL_TREE); gsi_insert_after (&bsi, exit_if, GSI_NEW_STMT); new_exit = make_edge (exit_bb, rest, EDGE_FALSE_VALUE | irr); rescan_loop_exit (new_exit, true, false); /* Set the probability of new exit to the same of the old one. Fix the frequency of the latch block, by scaling it back by 1 - exit->probability. */ new_exit->count = exit->count; new_exit->probability = exit->probability; new_nonexit = single_pred_edge (loop->latch); new_nonexit->probability = REG_BR_PROB_BASE - exit->probability; new_nonexit->flags = EDGE_TRUE_VALUE; new_nonexit->count -= exit->count; if (new_nonexit->count < 0) new_nonexit->count = 0; scale_bbs_frequencies_int (&loop->latch, 1, new_nonexit->probability, REG_BR_PROB_BASE); old_entry = loop_preheader_edge (loop); new_entry = loop_preheader_edge (new_loop); old_latch = loop_latch_edge (loop); for (psi_old_loop = gsi_start_phis (loop->header), psi_new_loop = gsi_start_phis (new_loop->header); !gsi_end_p (psi_old_loop); gsi_next (&psi_old_loop), gsi_next (&psi_new_loop)) { phi_old_loop = gsi_stmt (psi_old_loop); phi_new_loop = gsi_stmt (psi_new_loop); init = PHI_ARG_DEF_FROM_EDGE (phi_old_loop, old_entry); op = PHI_ARG_DEF_PTR_FROM_EDGE (phi_new_loop, new_entry); gcc_assert (operand_equal_for_phi_arg_p (init, USE_FROM_PTR (op))); next = PHI_ARG_DEF_FROM_EDGE (phi_old_loop, old_latch); /* Prefer using original variable as a base for the new ssa name. This is necessary for virtual ops, and useful in order to avoid losing debug info for real ops. */ if (TREE_CODE (next) == SSA_NAME && useless_type_conversion_p (TREE_TYPE (next), TREE_TYPE (init))) var = SSA_NAME_VAR (next); else if (TREE_CODE (init) == SSA_NAME && useless_type_conversion_p (TREE_TYPE (init), TREE_TYPE (next))) var = SSA_NAME_VAR (init); else if (useless_type_conversion_p (TREE_TYPE (next), TREE_TYPE (init))) { var = create_tmp_var (TREE_TYPE (next), "unrinittmp"); add_referenced_var (var); } else { var = create_tmp_var (TREE_TYPE (init), "unrinittmp"); add_referenced_var (var); } new_init = make_ssa_name (var, NULL); phi_rest = create_phi_node (new_init, rest); SSA_NAME_DEF_STMT (new_init) = phi_rest; add_phi_arg (phi_rest, init, precond_edge, UNKNOWN_LOCATION); add_phi_arg (phi_rest, next, new_exit, UNKNOWN_LOCATION); SET_USE (op, new_init); } remove_path (exit); /* Transform the loop. */ if (transform) (*transform) (loop, data); /* Unroll the loop and remove the exits in all iterations except for the last one. */ wont_exit = sbitmap_alloc (factor); sbitmap_ones (wont_exit); RESET_BIT (wont_exit, factor - 1); ok = gimple_duplicate_loop_to_header_edge (loop, loop_latch_edge (loop), factor - 1, wont_exit, new_exit, &to_remove, DLTHE_FLAG_UPDATE_FREQ); free (wont_exit); gcc_assert (ok); for (i = 0; VEC_iterate (edge, to_remove, i, e); i++) { ok = remove_path (e); gcc_assert (ok); } VEC_free (edge, heap, to_remove); update_ssa (TODO_update_ssa); /* Ensure that the frequencies in the loop match the new estimated number of iterations, and change the probability of the new exit edge. */ freq_h = loop->header->frequency; freq_e = EDGE_FREQUENCY (loop_preheader_edge (loop)); if (freq_h != 0) scale_loop_frequencies (loop, freq_e * (new_est_niter + 1), freq_h); exit_bb = single_pred (loop->latch); new_exit = find_edge (exit_bb, rest); new_exit->count = loop_preheader_edge (loop)->count; new_exit->probability = REG_BR_PROB_BASE / (new_est_niter + 1); rest->count += new_exit->count; rest->frequency += EDGE_FREQUENCY (new_exit); new_nonexit = single_pred_edge (loop->latch); prob = new_nonexit->probability; new_nonexit->probability = REG_BR_PROB_BASE - new_exit->probability; new_nonexit->count = exit_bb->count - new_exit->count; if (new_nonexit->count < 0) new_nonexit->count = 0; if (prob > 0) scale_bbs_frequencies_int (&loop->latch, 1, new_nonexit->probability, prob); /* Finally create the new counter for number of iterations and add the new exit instruction. */ bsi = gsi_last_bb (exit_bb); exit_if = gsi_stmt (bsi); create_iv (exit_base, exit_step, NULL_TREE, loop, &bsi, false, &ctr_before, &ctr_after); gimple_cond_set_code (exit_if, exit_cmp); gimple_cond_set_lhs (exit_if, ctr_after); gimple_cond_set_rhs (exit_if, exit_bound); update_stmt (exit_if); #ifdef ENABLE_CHECKING verify_flow_info (); verify_dominators (CDI_DOMINATORS); verify_loop_structure (); verify_loop_closed_ssa (); #endif } /* Wrapper over tree_transform_and_unroll_loop for case we do not want to transform the loop before unrolling. The meaning of the arguments is the same as for tree_transform_and_unroll_loop. */ void tree_unroll_loop (struct loop *loop, unsigned factor, edge exit, struct tree_niter_desc *desc) { tree_transform_and_unroll_loop (loop, factor, exit, desc, NULL, NULL); } /* Rewrite the phi node at position PSI in function of the main induction variable MAIN_IV and insert the generated code at GSI. */ static void rewrite_phi_with_iv (loop_p loop, gimple_stmt_iterator *psi, gimple_stmt_iterator *gsi, tree main_iv) { affine_iv iv; gimple stmt, phi = gsi_stmt (*psi); tree atype, mtype, val, res = PHI_RESULT (phi); if (!is_gimple_reg (res) || res == main_iv) { gsi_next (psi); return; } if (!simple_iv (loop, loop, res, &iv, true)) { gsi_next (psi); return; } remove_phi_node (psi, false); atype = TREE_TYPE (res); mtype = POINTER_TYPE_P (atype) ? sizetype : atype; val = fold_build2 (MULT_EXPR, mtype, unshare_expr (iv.step), fold_convert (mtype, main_iv)); val = fold_build2 (POINTER_TYPE_P (atype) ? POINTER_PLUS_EXPR : PLUS_EXPR, atype, unshare_expr (iv.base), val); val = force_gimple_operand_gsi (gsi, val, false, NULL_TREE, true, GSI_SAME_STMT); stmt = gimple_build_assign (res, val); gsi_insert_before (gsi, stmt, GSI_SAME_STMT); SSA_NAME_DEF_STMT (res) = stmt; } /* Rewrite all the phi nodes of LOOP in function of the main induction variable MAIN_IV. */ static void rewrite_all_phi_nodes_with_iv (loop_p loop, tree main_iv) { unsigned i; basic_block *bbs = get_loop_body_in_dom_order (loop); gimple_stmt_iterator psi; for (i = 0; i < loop->num_nodes; i++) { basic_block bb = bbs[i]; gimple_stmt_iterator gsi = gsi_after_labels (bb); if (bb->loop_father != loop) continue; for (psi = gsi_start_phis (bb); !gsi_end_p (psi); ) rewrite_phi_with_iv (loop, &psi, &gsi, main_iv); } free (bbs); } /* Bases all the induction variables in LOOP on a single induction variable (unsigned with base 0 and step 1), whose final value is compared with *NIT. When the IV type precision has to be larger than *NIT type precision, *NIT is converted to the larger type, the conversion code is inserted before the loop, and *NIT is updated to the new definition. When BUMP_IN_LATCH is true, the induction variable is incremented in the loop latch, otherwise it is incremented in the loop header. Return the induction variable that was created. */ tree canonicalize_loop_ivs (struct loop *loop, tree *nit, bool bump_in_latch) { unsigned precision = TYPE_PRECISION (TREE_TYPE (*nit)); unsigned original_precision = precision; tree type, var_before; gimple_stmt_iterator gsi, psi; gimple stmt; edge exit = single_dom_exit (loop); gimple_seq stmts; for (psi = gsi_start_phis (loop->header); !gsi_end_p (psi); gsi_next (&psi)) { gimple phi = gsi_stmt (psi); tree res = PHI_RESULT (phi); if (is_gimple_reg (res) && TYPE_PRECISION (TREE_TYPE (res)) > precision) precision = TYPE_PRECISION (TREE_TYPE (res)); } type = lang_hooks.types.type_for_size (precision, 1); if (original_precision != precision) { *nit = fold_convert (type, *nit); *nit = force_gimple_operand (*nit, &stmts, true, NULL_TREE); if (stmts) gsi_insert_seq_on_edge_immediate (loop_preheader_edge (loop), stmts); } gsi = gsi_last_bb (bump_in_latch ? loop->latch : loop->header); create_iv (build_int_cst_type (type, 0), build_int_cst (type, 1), NULL_TREE, loop, &gsi, bump_in_latch, &var_before, NULL); rewrite_all_phi_nodes_with_iv (loop, var_before); stmt = last_stmt (exit->src); /* Make the loop exit if the control condition is not satisfied. */ if (exit->flags & EDGE_TRUE_VALUE) { edge te, fe; extract_true_false_edges_from_block (exit->src, &te, &fe); te->flags = EDGE_FALSE_VALUE; fe->flags = EDGE_TRUE_VALUE; } gimple_cond_set_code (stmt, LT_EXPR); gimple_cond_set_lhs (stmt, var_before); gimple_cond_set_rhs (stmt, *nit); update_stmt (stmt); return var_before; }
Go to most recent revision | Compare with Previous | Blame | View Log