OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [gdb/] [ChangeLog-2007] - Rev 24

Go to most recent revision | Compare with Previous | Blame | View Log

2007-12-31  Daniel Jacobowitz  <dan@codesourcery.com>

        * remote.c (unpack_nibble): Use fromhex.
        * symtab.c (find_line_common): Always set exact_match.

2007-12-31  Daniel Jacobowitz  <dan@codesourcery.com>

        * hppa-linux-nat.c: Use hppa-linux-offsets.h.
        * hppa-linux-offsets.h: New file.

2007-12-30  Pedro Alves  <pedro_alves@portugalmail.pt>

        * configure.tgt (*-*-mingw32ce*): Set gdb_osabi to
        GDB_OSABI_WINCE.
        (*-*-mingw* | *-*-cygwin*): Set gdb_osabi to GDB_OSABI_CYGWIN.

2007-12-29  Nick Hudson  <nick.hudson@dsl.pipex.com>

        * i386nbsd-tdep.c: Include "trad-frame.h" and "tramp-frame.h"
        (sigtramp_retcode, i386nbsd_sigtramp_offset, i386nbsd_sigtramp_p):
        Remove
        (i386nbsd_mc_reg_offset): New array.
        (i386nbsd_sigtramp_cache_init): New function.
        (i386nbsd_sigtramp_sc16, i386nbsd_sigtramp_sc2, i386nbsd_sigtramp_si2)
        (i386nbsd_sigtramp_si31, i386nbsd_sigtramp_si4): New signal trampoline
        frame descriptions.
        (i386nbsd_init_abi): Override ABI sigcontext defaults and register
        new signal frame unwinders
        * Makefile.in (i386nbsd-tdep.o): Update dependencies.
        * tramp-frame.h (struct tramp_frame): Allow for 48 instructions

2007-12-29  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (_initialize_ada_language): Attach executable_changed
        observer.

2007-12-28  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp): Break two large expressions
        using temporary variables.

2007-12-27  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_value_cast): New function, extracted out from
        the code in ada_evaluate_subexp, case UNOP_CAST.  The code handling
        the obscure case has been removed as we think that it is actually
        unnecessary.
        (ada_evaluate_subexp): Add type case when evaluating an OP_DOUBLE
        or an OP_LONG with a non-null expect_type. Replace extracted-out
        code with call to new ada_value_cast function.

2007-12-27  Paul Hilfinger  <hilfinger@adacore.com>

        * ada-lang.c (ada_evaluate_subexp): Add cases for BINOP_LOGICAL_AND,
        BINOP_LOGICAL_OR, UNOP_LOGICAL_NOT, BINOP_BITWISE_IOR,
        BINOP_BITWISE_XOR, BINOP_BITWISE_AND.
        * language.c (lang_bool_type): Add Ada case.

2007-12-26  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (read_base_type): Fix obvious &&/|| confusion.

2007-12-26  Luis Machado  <luisgpm@br.ibm.com>

        * dwarf2-frame.c (execute_cfa_program): Call dwarf2_restore_rule
        function to handle required actions for the DW_CFA_restore and
        DW_CFA_restore_extended instructions.
        (dwarf2_restore_rule): New function.

2007-12-24  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_is_character_type): Add recognition of type
        "Wide_Wide_Character".

2007-12-24  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
        for char and unsigned char types of Ada compilation units.
        * ada-lang.c (ada_is_character_type): Always return true if
        the type code is TYPE_CODE_CHAR.

2007-12-23  Joel Brobecker  <brobecker@adacore.com>

        * infrun.c (handle_inferior_event): Remove code that made us
        stop when stepping into the last line of the current function.

2007-12-22  Pierre Muller  <muller@ics.u-strasbg.fr>

        * win32-nat.c: Fix PR gdb/2388.
        (do_win32_fetch_inferior_registers): Do not overwrite debug register
        array dr if debug_registers_changed variable is set.

2007-12-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * dwarf2read.c (scan_partial_symbols partial_die_parent_scope)
        (add_partial_symbol, pdi_needs_namespace, process_die)
        (is_type_tag_for_partial, load_partial_dies, new_symbol)
        (read_type_die, determine_prefix): Extend the current code of
        `DW_TAG_class_type' also for `DW_TAG_interface_type'.

2007-12-21  Paul N. Hilfinger  <hilfinger@adacore.com>

        * ada-lang.h (ada_renaming_category): New enumerated type.
        (ada_lookup_encoded_symbol): Declare.
        (ada_parse_renaming): Declare.
        (ada_renaming_type,ada_is_object_renaming)
        (ada_simple_renamed_entity): Delete declarations.
        * ada-lang.c (ada_parse_renaming): New function to concentrate
        extraction of information from renaming symbols.
        (parse_old_style_renaming): New function to concentrate
        extraction of old-style (purely type-based) renaming information.
        (renaming_is_visible): Rename to...
        (old_renaming_is_invisible): Rename and change sense of
        renaming_is_visible.
        (remove_out_of_scope_renamings): Rename to...
        (remove_irrelevant_renamings): Renames remove_out_of_scope_renamings
        and augments with additional logic to handle cases where the same
        object renaming is encoded both as a reference variable and an
        encoded renaming.
        (ada_renaming_type,ada_is_object_renaming)
        (ada_simple_renamed_entity): Delete definitions.
        (ada_lookup_encoded_symbol): New function factored out of
        ada_lookup_symbol.
        (ada_lookup_symbol): Reimplement to call ada_lookup_encoded_symbol.
        (wild_match): Don't reject perfect match of prefix.
        (ada_find_renaming_symbol): Factor old-style renaming logic into
        find_old_style_renaming_symbol.
        (find_old_style_renaming_symbol): New name for content of old
        ada_find_renaming_symbol.
        (ada_prefer_type): Reimplement not to use ada_renaming_type.
        * ada-exp.y (write_object_renaming): Change interface.  Reimplement
        to use new arguments and ada_parse_renaming.
        Correct blocks used to find array index.
        (write_var_or_type): Reimplement to use ada_parse_renaming.

2007-12-21  Denis Pilat <denis.pilat@st.com>

        * tui/tui-data.h (MAX_LOCATOR_ELEMENT_LEN): Defined to a bigger
        value or to PATH_MAX when possible.

2007-12-20  Joel Brobecker  <brobecker@adacore.com>

        * rs6000-tdep.h: Remove defs.h #include.
        * Makefile.in (rs6000_tdep_h): Update dependencies.

2007-12-20  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * gdbtypes.c (gdbtypes_post_init): Change names of decimal float types
        to conform to C extension for decimal float.
        * c-lang.c (enum c_primitive_types): Add entries for Decimal Floating
        Point types.
        (enum cplus_primitive_types): Likewise.
        (c_language_arch_info): Add Decimal Floating Point builtin types to
        the primitive_type_vector.
        (cplus_language_arch_info): Likewise.

2007-12-20  David Ung  <davidu@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_n32n64_push_dummy_call): Sign-extend
        integers and 32-bit pointers as required by the ABI.

2007-12-20  Joel Brobecker  <brobecker@adacore.com>

        * symtab.h: Remove "defs.h" #include.
        * Makefile.in (symtab_h): Update dependencies.

2007-12-19  Joel Brobecker  <brobecker@adacore.com>

        * symtab.h: #include "defs.h".
        (enum language): Remove opaque declaration.
        * Makefile.in (symtab_h): Update dependencies.

2007-12-19  Joel Brobecker  <brobecker@adacore.com>

        * language.h (enum exp_opcode): Remove commented out forward
        declaration.
        (op_error): Delete declaration.

2007-12-19  Joel Brobecker  <brobecker@adacore.com>

        * infrun.c (handle_inferior_event): Fix spelling in comment.

2007-12-18  Daniel Jacobowitz  <dan@codesourcery.com>

        * minsyms.c (lookup_minimal_symbol): Also check the separate
        debug objfile.
        (lookup_minimal_symbol_text): Likewise.
        (lookup_minimal_symbol_solib_trampoline): Likewise.
        * symtab.c (lookup_global_symbol_from_objfile): Likewise.

2007-12-18  Vladimir Prus  <vladimir@codesourcery.com>

        * mi/mi-main.c (mi_cmd_list_features): Announce
        the 'pending-breakpoints' feature.

2007-12-17  Jim Blandy  <jimb@codesourcery.com>

        * dwarf2read.c (dwarf2_add_field): Correctly scale all byte
        offsets obtained from DW_AT_data_member_location before recording
        them in FIELD_BITPOS (*fp).

        * dwarf2read.c (attr_form_is_section_offset): Doc fixes.

2007-12-17  Nigel Stephens  <nigel@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * utils.c (string_to_core_addr): If the executable format
        indicates that addresses should be sign-extended and there are
        only 8 hex digits in the address, then do so.
        * Makefile.in (utils.o): Depend on $(gdbcore_h).

2007-12-17  Chris Dearman  <chris@mips.com>

        * symfile.c (init_filename_language_table): Recognise .sx as
        an assembler file.

2007-12-17  Joel Brobecker  <brobecker@adacore.com>

        * language.h (enum exp_opcode): Comment out this declaration,
        undoing the previous change.

2007-12-17  Luis Machado  <luisgpm@br.ibm.com>

        * breakpoint.c: (watch_command_1): Parse additional optional
        "thread" parameter to the watchpoint command and set the
        "thread" member of the breakpoint struct.

2007-12-17  Luis Machado  <luisgpm@br.ibm.com>

        * breakpoint.c (bpstat_stop_status): Check an additional
        condition before evaluating an expression value.

2007-12-17  Joel Brobecker  <brobecker@adacore.com>

        * language.h (enum exp_opcode): Add forward declaration.
        (language_string_char_type, language_lookup_primitive_type_by_name):
        Move declaration past declaration of language_defn.

2007-12-16  Daniel Jacobowitz  <dan@codesourcery.com>
            Joseph Myers  <joseph@codesourcery.com>

        * configure.ac: Check for *-*-solaris2.1[[0-9]]* instead of
        *-*-solaris2.1[[0-9]].
        * configure: Regenerate.
        * procfs.c (proc_set_current_signal): If redelivering a signal,
        reuse the current siginfo if possible.

2007-12-16  Francois-Xavier Coudert  <fxcoudert@gcc.gnu.org>

        * f-typeprint.c (print_equivalent_f77_float_type): Remove function.
        (f_type_print_base): Output the type names directly for real and
        complex types.

2007-12-16  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (bpstat_have_active_hw_watchpoints):
        Remove
        (bpstat_stop_status): Remove unused variable
        real_breakpoint.
        * breakpoint.h (bpstat_have_active_hw_watchpoints):
        Remove prototype.

2007-12-16  Vladimir Prus  <vladimir@codesourcery.com>

        * target.h (target_pid_or_tid_to_str): Remove.
        * infrun.c (handle_inferior_event):
        Use target_pid_to_str instead of 
        target_pid_or_tid_to_str.
        (normal_stop): Likewise.

2007-12-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * dwarf2read.c (dwarf_attr_name): Rename `DW_AT_stride_size' to its
        DWARF3 equivalent `DW_AT_bit_stride'.
        Rename `DW_AT_stride' to its DWARF3 equivalent `DW_AT_byte_stride'.

2007-12-16  Joel Brobecker  <brobecker@adacore.com>

        * mi/mi-main.c: Remove code that was commented out in 1999.

2007-12-16  Joel Brobecker  <brobecker@adacore.com>

        * expression.h (parse_expression_in_context): Delete prototype.
        * parse.c (parse_expression_in_context): Delete.

2007-12-14  Vladimir Prus  <vladimir@codesourcery.com>

        Add support for pending breakpoints in MI.
        * gdb.h (gdb_breakpoint): Add parameter pending.
        * breakpoint.c (gdb_breakpoint): Add parameter pending.
        * mi/mi-cmd-break.c (mi_break_insert): Change
        comment to refer to manual.  Add support for
        the -f flag, for pending breakpoint.

2007-12-14  Vladimir Prus  <vladimir@codesourcery.com>
        
        * breakpoint.c (break_command_really): New, copied
        from break_command_1. New parameters COND_STRING, THREAD
        PARSE_CONDITITION_AND_THREAD and PENDING_BREAK_SUPPORT.
        The previous FLAG parameter split into TEMPFLAG and
        HARDWAREFLAG.
        When PARSE_CONDITION_AND_THREAD is not set, duplicate
        the passed condition string.
        (struct captured_breakpoint_args): Remove
        (do_captured_breakpoint): Remove.
        (break_command_1): Relay to break_command_really.
        (gdb_breakpoint): Relay to break_command_really.
        
2007-12-13  Michael Snyder  <msnyder@specifix.com>

        * mips-linux-tdep.c (mips64_fill_gregset): Remove unused variable.

2007-12-13  Jim Blandy  <jimb@codesourcery.com>

        * dwarf2read.c (attr_form_is_constant): New function.
        (dwarf2_add_field): Use it and attr_form_is_section_offset to
        recognize DW_AT_data_member_location attributes.  Use
        dwarf2_get_attr_constant_value when the attribute is a constant.

        * dwarf2read.c (attr_form_is_section_offset): New function.
        (dwarf_add_member_fn, read_common_block, read_partial_die)
        (dwarf2_symbol_mark_computed): Use it, instead of writing it out.

2007-12-12  Jim Blandy  <jimb@codesourcery.com>

        Remove unused support for target-based exception catching.
        * target.h (struct target_ops): Delete
        to_enable_exception_callback and to_get_current_exception_event
        members.
        (target_enable_exception_callback)
        (target_get_current_exception_event): Delete macros.
        * target.c (update_current_target): Remove code to inherit and
        default those members.
        (debug_to_enable_exception_callback)
        (debug_to_get_current_exception_event): Delete functions.
        (setup_target_debug): Don't install those methods.
        * inf-child.c (inf_child_enable_exception_callback)
        (inf_child_get_current_exception_event): Delete dummy functions.
        (inf_child_target): Don't install them in the target vector.
        * breakpoint.h (enum bptype): Delete bp_catch_catch,
        bp_catch_throw.
        * breakpoint.c (cover_target_enable_exception_callback)
        (ep_is_exception_catchpoint, create_exception_catchpoint): Delete
        functions.
        (insert_bp_location, update_breakpoints_after_exec)
        (remove_breakpoint, ep_is_catchpoint, print_it_typical)
        (bpstat_stop_status, bpstat_what)
        (bpstat_get_triggered_catchpoints, print_one_breakpoint_location)
        (user_settable_breakpoint, allocate_bp_location)
        (disable_watchpoints_before_interactive_call_start)
        (enable_watchpoints_after_interactive_call_stop, mention)
        (delete_breakpoint, breakpoint_re_set_one, disable_command)
        (enable_command): Remove exception catchpoint cases.
        (catch_exception_command_1): Don't try target-based exception
        handling.
        * stack.c (catch_info): Call print_frame_label_vars
        unconditionally.
        
2007-12-12  Nigel Stephens  <nigel@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * remote-mips.c (mips_load): Use regcache_set_valid_p() instead
        of setting deprecated_register_valid array directly.

2007-12-07  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (extended_offset): Fix a comment.

2007-12-07  Maciej W. Rozycki  <macro@mips.com>

        * target.c (update_current_target): Inherit to_log_command.
        * target.h (struct target_ops). Add to_log_command.
        (target_log_command): New macro.
        * top.c (execute_command): Call target_log_command() rather than
        serial_log_command().
        * monitor.c (init_base_monitor_ops): Initialize to_log_command.
        * remote-m32r-sdi.c (init_m32r_ops): Likewise.
        * remote-mips.c (_initialize_remote_mips): Likewise.
        * remote.c (init_remote_ops): Likewise.

2007-12-06  Daniel Jacobowitz  <dan@codesourcery.com>

        * infrun.c (init_wait_for_inferior): Reset target_last_wait_ptid.
        (handle_inferior_event): Clear stop_stack_dummy earlier.

2007-12-06  Jim Blandy  <jimb@codesourcery.com>

        * addrmap.c (addrmap_splay_tree_remove): New function.
        (addrmap_mutable_set_empty): Use it.

        * addrmap.c, addrmap.h: Update to GPLv3.

        * addrmap.c (struct addrmap): Make the referenced function table
        const.
        (addrmap_fixed_funcs, addrmap_mutable_funcs): Declare const.
        Don't use designated initializers.

        * addrmap.c (addrmap_fixed_create_fixed, addrmap_mutable_find)
        (addrmap_mutable_relocate): Use internal_error, not abort.

        * NEWS: Mention support for non-contiguous lexical blocks and
        function bodies.

2007-12-06  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (stab_reg_to_regnum, dwarf_reg_to_regnum)
        ( dwarf2_reg_to_regnum, sdb_reg_to_regnum, ecoff_reg_to_regnum): Add
        gdbarch as parameter.
        * gdbarch.{c,h}: Regenerate.

        * xtensa-tdep.c (xtensa_reg_to_regnum): Add gdbarch as parameter.
        Replace current_gdbarch by gdbarch.
        * s390-tdep.c (s390_dwarf_reg_to_regnum): Likewise.
        * rs6000-tdep.c (rs6000_stab_reg_to_regnum)
        (rs6000_dwarf2_reg_to_regnum): Likewise.
        * mips-tdep.c (mips_stab_reg_to_regnum)
        (mips_dwarf_dwarf2_ecoff_reg_to_regnum): Likewise.
        * mep-tdep.c (mep_debug_reg_to_regnum): Likewise.
        * m32c-tdep.c (m32c_debug_info_reg_to_regnum): Likewise.
        * i386-tdep.c (i386_dbx_reg_to_regnum)
        (i386_svr4_reg_to_regnum): Likewise
        * h8300-tdep.c (h8300s_dbg_reg_to_regnum)
        (h8300_dbg_reg_to_regnum): Likewise.
        * amd64-tdep.c (amd64_dwarf_reg_to_regnum): Likewise.
        * arch-utils.c (no_op_reg_to_regnum): Likewise.
        * arch-utils.h (no_op_reg_to_regnum): Likewise.
        * arm-tdep.c (arm_dwarf_reg_to_regnum): Likewise.
        * cris-tdep.c (cris_dwarf2_reg_to_regnum): Likewise.
        * hppa-tdep.c (hppa64_dwarf_reg_to_regnum): Likewise.
        * ia64-tdep.c (ia64_dwarf_reg_to_regnum): Likewise.
        * m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.

2007-12-06  Vladimir Prus  <vladimir@codesourcery.com>

        Localize infrun use of remove_breakpoints.
        * infrun.c (handle_inferior_event): Remove
        calls to remove_breakpoints, except where needed to
        communicate change of breakpoint locations to inferior.
        (keep_going): If steppping over breakpoint, remove
        breakpoints.

2007-12-06  Vladimir Prus  <vladimir@codesourcery.com>  
        
        Clarify infrun variable naming.
        * infrun.c (trap_expected): Rename
        to stepping_over_breakpoint.  Document.
        (stepping_past_breakpoint): Remove.
        (stepping_past_breakpoint_ptdi): Renamed
        to deferred_step_ptid.
        (struct execution_control_state): Rename
        the another_trap field to stepping_over_breakpoint.
        (struct inferior_status): Rename the trap_expected
        field to stepping_over_breakpoint.
        (clear_proceed_status, proceed)
        (init_execution_control_state, context_switch)
        (handle_inferior_event, currently_stepping)
        (keep_going, save_inferior_status)
        (restore_inferior_status, prepare_to_proceed): Adjust.
        * gdbthread.h (struct thread_info): Rename the
        trap_expected field to stepping_over_breakpoint.
        * thread.c (load_infrun_state, save_infrun_state):
        Adjust.

2007-12-06  Pierre Muller  <muller@ics.u-strasbg.fr>

        * win32-nat.c: Allow compilation if CORE_ADDR is 8 byte long.
        Add "gdb_stdint.h" dependency required for uintptr_t type use.
        (handle_output_debug_string): Use uintptr_t typecast.
        (handle_exception): Ditto.
        (win32_xfer_memory): Ditto.
        * Makefile.in (win32-nat.o): Add dependency to gdb_stdint header.

2007-12-04  Jim Blandy  <jimb@codesourcery.com>

        Support lexical blocks and function bodies that occupy
        non-contiguous address ranges.
        * addrmap.c, addrmap.h: New files.
        * block.h (struct addrmap): New forward declaration.
        (struct blockvector): New member, 'map'.
        (BLOCKVECTOR_MAP): New accessor macro.
        * block.c: #include "addrmap.h"
        (blockvector_for_pc_sect): If the blockvector we've found has
        an address map, use it instead of searching the blocks.
        * buildsym.c: #include "addrmap.h"
        (pending_addrmap_obstack, pending_addrmap_interesting): New static
        variables.
        (really_free_pendings): If we have a pending addrmap, free it too.
        (record_block_range): New function.
        (make_blockvector): If we have an interesting pending addrmap,
        record it in the new blockvector.
        (start_symtab, buildsym_init): Assert that there is no pending
        addrmap now; we should have cleaned up any addrmaps we'd built
        previously.
        (end_symtab): If there is a pending addrmap left over that didn't
        get included in the blockvector, free it.
        * buildsym.h (struct addrmap): New forward declaration.
        (record_block_range): New prototype.
        * objfiles.c: #include "addrmap.h".
        (objfile_relocate): Relocate the blockvector's address map, if
        present.
        * dwarf2read.c (dwarf2_record_block_ranges): New function.
        (read_func_scope, read_lexical_block_scope): Call it.
        * Makefile.in (SFILES): Add addrmap.c.
        (addrmap_h): New header dependency variable.
        (COMMON_OBS): Add addrmap.o.
        (addrmap.o): New rule.l
        (block.o, objfiles.o, buildsym.o): Depend on $(addrmap_h).

        * block.c (blockvector_for_pc, blockvector_for_pc_sect): Return a
        pointer to the block, not its index in the blockvector.
        (block_for_pc_sect): Use the returned block, instead of looking it
        up ourselves.
        * block.h (blockvector_for_pc, blockvector_for_pc_sect): Update
        declarations.
        * breakpoint.c (resolve_sal_pc): Use returned block, instead of
        looking it up ourselves.
        * stack.c (print_frame_label_vars): Disable function, which
        depends on the block's index.

        * buildsym.c (finish_block): Return the block we've built.
        * buildsym.h (finish_block): Update prototype.

        * defs.h (CORE_ADDR_MAX): New constant.

2007-12-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * coffread.c (decode_type): Use builtin_type_int32 instead
        of FT_INTEGER fundamental type for array range index type.
        (decode_base_type): Use builtin types of current_gdbarch
        instead of fundamental types.

        * dwarf2read.c (struct dwarf2_cu): Remove ftypes member.
        (read_file_scope): Do not initialize ftypes member.
        (dwarf_base_type, dwarf2_fundamental_types): Remove functions.
        (read_array_type): Use builtin_type_int32 instead of FT_INTEGER
        fundamental type for array range index type.
        (read_tag_string_type): Likewise for string range index type.
        Also, do not overwrite FT_CHAR type with new string type.
        (read_base_type): If DW_AT_name is missing, create unnamed type
        with given properties instead of looking for a fundamental type.
        Create new types as TYPE_TARGET_TYPE for DW_ATE_address and
        DW_ATE_complex_float types.
        (read_subrange_type): Create new type to represent missing
        DW_AT_type instead of looking for a fundamental type.
        (die_type): Use builtin type to represent "void" instead of
        looking for a fundamental type.

        * stabsread.c (define_symbol): Use builtin types to represent
        'r' and 'i' floating-point and integer constants.

        * gdbtypes.c (lookup_fundamental_type): Remove.
        * gdbtypes.h (lookup_fundamental_type): Remove prototype.
        (FT_VOID, FT_BOOLEAN, FT_CHAR, FT_SIGNED_CHAR, FT_UNSIGNED_CHAR,
        FT_SHORT, FT_SIGNED_SHORT, FT_UNSIGNED_SHORT, FT_INTEGER,
        FT_SIGNED_INTEGER, FT_UNSIGNED_INTEGER, FT_LONG, FT_SIGNED_LONG,
        FT_UNSIGNED_LONG, FT_LONG_LONG, FT_SIGNED_LONG_LONG,
        FT_UNSIGNED_LONG_LONG, FT_FLOAT, FT_DBL_PREC_FLOAT, FT_EXT_PREC_FLOAT,
        FT_COMPLEX, FT_DBL_PREC_COMPLEX, FT_EXT_PREC_COMPLEX, FT_STRING,
        FT_FIXED_DECIMAL, FT_FLOAT_DECIMAL, FT_BYTE, FT_UNSIGNED_BYTE,
        FT_TEMPLATE_ARG, FT_DECFLOAT, FT_DBL_PREC_DECFLOAT,
        FT_EXT_PREC_DECFLOAT, FT_NUM_MEMBERS): Remove macros.
        * objfiles.c (struct objfile): Remove fundamental_types member.
        * symfile.c (reread_symbols): Do not clear fundamental_types.

        * language.h (struct language_defn): Remove la_fund_type member.
        (create_fundamental_type): Remove.
        * language.c (unk_lang_create_fundamental_type): Remove.
        (unknown_language_defn, auto_language_defn,
        local_language_defn): Adapt initializer.
        * ada-lang.c (ada_create_fundamental_type): Remove.
        (ada_language_defn): Adapt initializer.
        * c-lang.h (c_create_fundamental_type): Remove prototype.
        * c-lang.c (c_create_fundamental_type): Remove.
        (c_language_defn, cplus_language_defn, asm_language_defn,
        minimal_language_defn): Adapt initializer.
        * f-lang.c (f_create_fundamental_type): Remove.
        (f_language_defn): Adapt initializer.
        * jv-lang.c (java_create_fundamental_type): Remove.
        (java_language_defn): Adapt initializer.
        * m2-lang.c (m2_create_fundamental_type): Remove.
        (m2_language_defn): Adapt initializer.
        * objc-lang.c (objc_create_fundamental_type): Remove.
        (objc_language_defn): Adapt initializer.
        * p-lang.h (pascal_create_fundamental_type): Remove prototype.
        * p-lang.c (pascal_create_fundamental_type): Remove.
        (pascal_language_defn): Adapt initializer.
        * scm-lang.c (scm_language_defn): Adapt initializer.

2007-12-04  Maciej W. Rozycki  <macro@mips.com>

        * features/mips-cpu.xml: Specify "regnum" for "r0" explicitly.
        * features/mips64-cpu.xml: Likewise.
        * features/mips-fpu.xml: Specify "regnum" for "f0" explicitly.
        * features/mips64-fpu.xml: Likewise.
        * features/mips-linux.c: Regenerate.
        * features/mips64-linux.c: Regenerate.

2007-12-04  Maciej W. Rozycki  <macro@mips.com>

        * target.h (target_find_new_threads): Fix definition.

2007-12-02  Pierre Muller  <muller@ics.u-strasbg.fr>

        * win32-nat.c (win32_resume): Set the trace bit
        in the thread identified by inferior_ptid.


2007-12-02  Pierre Muller  <muller@ics.u-strasbg.fr>

        * win32-nat.c (open_process_used): New static variable.
        (win32_init_thread_list): Remove call to CloseHandle for thread.
        (win32_delete_thread): Ditto.
        (fake_create_process): Set open_process_used if OpenProcess call is
        successful.
        (get_win32_debug_event): Do not close process handle.
        (do_initial_win32_stuff): Set open_process_used to zero.
        (win32_mourn_inferior): Call CloseHandle for current_process_handle if
        open_process_used is set.
        (win32_kill_inferior): Do not close process and main_thread handles.

2007-11-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * remote.c (remote_cmdlist): New variable.
        (PACKET_vFile_open, PACKET_vFile_pread, PACKET_vFile_pwrite)
        (PACKET_vFile_close, PACKET_vFile_unlink): New constants.
        (remote_buffer_add_string, remote_buffer_add_bytes)
        (remote_buffer_add_int, remote_hostio_parse_result)
        (remote_hostio_send_command, remote_hostio_open, remote_hostio_pwrite)
        (remote_hostio_pread, remote_hostio_close, remote_hostio_unlink)
        (remote_fileio_errno_to_host, remote_hostio_error, fclose_cleanup)
        (remote_hostio_close_cleanup, remote_file_put, remote_file_get)
        (remote_file_delete, remote_put_command, remote_get_command)
        (remote_delete_command, remote_command): New functions.
        (_initialize_remote): Register new packets and commands.
        * Makefile.in (gdb_fileio_h): New variable.
        (remote.o): Update.
        (SUBDIR_MI_OBS): Add mi-cmd-target.o.
        (SUBDIR_MI_SRCS): Add mi/mi-cmd-target.c.
        (mi-cmd-target.o): New rule.
        * mi/mi-cmd-target.c: New file.
        * mi/mi-cmds.c (mi_cmds): Add target-file-delete, target-file-get,
        and target-file-put.
        * mi/mi-cmds.h (mi_cmd_target_file_get, mi_cmd_target_file_put)
        (mi_cmd_target_file_delete): Declare.
        * remote.h (remote_file_put, remote_file_get, remote_file_delete):
        Declare.
        * NEWS: Describe new file transfer support.

2007-11-30  Vladimir Prus  <vladimir@codesourcery.com>

        * infrun.c (handle_inferior_event): Don't
        ignore beakpoints if trap_expected is set.

2007-11-30  Vladimir Prus  <vladimir@codesourcery.com>

        Make insert_breakpoints return void.    
        * breakpoint.h (insert_breakpoints): Change
        return type to void.
        * breakpoint.c (insert_breakpoints): Change
        return type to void.  Rename local return_val
        variable to error.
        * infrun.c (keep_going): Instead of checking
        return value from insert_breakpoints, catch exception.

2007-11-29  Vladimir Prus  <vladimir@codesourcery.com>

        Stop infrun from tracking breakpoint insertion status.

        The checks of breakpoints_inserted before calling
        remove_breakpoints are removed, as remove_breakpoint 
        won't touch uninserted breakpoints. In a number of places,
        we're interested if a breakpoint is inserted at particular 
        PC, and we now use breakpoint_inserted_here_p.  In a few
        places, insert_breakpoints can be called unconditionally, 
        since it won't try to insert already inserted breakpoint.

        * breakpoint.h (regular_breakpoint_inserted_here_p): New
        declaration.
        * breakpoint.c (regular_breakpoint_inserted_here_p): New.
        (breakpoint_inserted_here_p): Use
        regular_breakpoint_inserted_here_p.
        * infrun.c (breakpoints_inserted): Remove.
        (resume): Don't check for breakpoints_inserted before
        remove_hw_watchpoints. Use breakpoint_inserted_here_p.
        (proceed, init_wait_for_inferior): Don't set breakpoints_inserted.
        (handle_inferior_event): Don't use breakpoints_inserted.
        Use breakpoints_meant_to_be_inserted and
        breakpoints_inserted_here_p.
        (insert_step_resume_breakpoint_at_sal, keep_going): Use
        breakpoints_meant_to_be_inserted. Don't set breakpoints_inserted.
        (normal_stop): Don't check for breakpoints_inserted.  Don't
        set breakpoints_inserted.
        (keep_going): Don't check for breakpoints_inserted.
        (insert_step_resume_breakpoint_at_sal): Don't insert
        breakpoints

2007-11-28  Jim Blandy  <jimb@codesourcery.com>

        * breakpoint.c (watch_command_1): When the watchpoint isn't local
        to any frame, initialize watchpoint_frame using null_frame_id, not
        a memset.

2007-11-28  Vladimir Prus  <vladimir@codesourcery.com>

        * infrun.c (resume): Set right thread even if 
        stepping over breakpoint using software single step.

2007-11-28  Nick Roberts  <nickrob@snap.net.nz>

        * mi/mi-cmd-var.c (print_varobj): Revert change from 2007-08-31.
        (mi_print_value_p): Guard against type = NULL.

2007-11-27  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * dfp.c (decimal_from_string): Remove superfluous newline from
        error string.
        (decimal_to_string): Likewise.
        * printcmd.c (printf_command): Change string buffer to use
        MAX_DECIMAL_STRING constant.
        * value.c (value_from_decfloat): Likewise.

2007-11-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * Makefile.in (ALL_TARGET_OBS): Remove object files that require
        64-bit CORE_ADDR and BFD support, move them to ...
        (ALL_64_TARGET_OBS): ... this new variable.
        * configure.ac: Check for --enable-64-bit-bfd option.  Only add
        64-bit targets with --enable-targets=all if BFD supports 64-bit.
        * configure: Regenerate.

        * i386-cygwin-tdep.c (i386_cygwin_osabi_sniffer): Do not claim
        all elf32-i386 executables, only cygwin core files.

2007-11-25  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * dwarf2read.c (dwarf2_get_pc_bounds): Moved the `DW_AT_ranges' parsing
        code with its variables OBJFILE, CU_HEADER and OBFD into ...
        (dwarf2_ranges_read): ... a new function.
        (read_partial_die): Implemented the parsing of `DW_AT_ranges'.

2007-11-24  Pedro Alves  <pedro_alves@portugalmail.pt>

        * win32-nat.c (DR6_CLEAR_VALUE): New define.
        (thread_info_struct): Rename suspend_count to suspended, to be
        used as a flag.
        (thread_rec): Only suspend the thread if it wasn't suspended by
        gdb before.  Warn if suspending failed.
        (win32_add_thread): Set Dr6 to DR6_CLEAR_VALUE.
        (win32_continue): Set Dr6 to DR6_CLEAR_VALUE.  Update usage of the
        `suspended' flag.  Do ContinueDebugEvent after resuming the
        suspended threads, not before.  Set threads' contexts before
        resuming them, not after.
        (win32_resume): Set Dr6 to DR6_CLEAR_VALUE.

2007-11-23  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (insert_breakpoints)
        (insert_bp_location): Remove stale comments.
        
2007-11-23  Maciej W. Rozycki  <macro@mips.com>

        * mips-linux-tdep.h: Fix some formatting.

2007-11-21  Markus Deuling  <deuling@de.ibm.com>

        * stack.c (print_args_stub): Use get_frame_arch to get at the current
        architecture and replace current_gdbarch.
        (frame_info): Likewise.

2007-11-21  Nick Roberts  <nickrob@snap.net.nz>

        * varobj.c (c_variable_editable, cplus_variable_editable)
        (java_variable_editable, variable_editable): Delete.
        (varobj_editable_p): Replace above functions with one language
        independent function.  Check for an lvalue.
        (varobj_get_attributes, varobj_set_value): Use varobj_editable_p.
        (struct language_specific): Delete variable_editable field.

        * mi-cmd-var.c (mi_cmd_var_assign): Simplify.

        * varobj.h: Add extern for varobj_editable_p.

2007-11-20  Vladimir Prus  <vladimir@codesourcery.com>

        Remove unused breakpoint fields.
        * breakpoint.h (struct breakpoint): Remove
        from_tty and flag fields.
        * breakpoint.c (break_command_1): Don't set
        from_tty and flag field set of breakpoint.
        (create_ada_exception_breakpoint): Don't set
        the from_tty field.

2007-11-20  David Ung  <davidu@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips16_scan_prologue): Handle the MIPS16e SAVE
        instruction.

2007-11-20  Vladimir Prus  <vladimir@codesourcery.com>

        * infrun.c (resume): Clarify logic that
        decides if a single thread must be resumed. Add
        comments.

2007-11-20  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (disable_breakpoints_in_unloaded_shlib):
        Make static.

2007-11-19  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (register_sim_regno): Add gdbarch as parameter.
        * gdbarch.{c,h}: Regenerate.

        * arch-utils.h (legacy_register_sim_regno): Add gdbarch as parameter.
        * score-tdep.c (score_register_sim_regno): Likewise.
        * sim-regno.h (one2one_register_sim_regno): Likewise.

        * arch-utils.c (legacy_register_sim_regno): Add gdbarch as parameter.
        Replace current_gdbarch by gdbarch. 
        * sh-tdep.c (sh_sh2a_register_sim_regno)
        (sh_dsp_register_sim_regno): Likewise.
        * rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
        * mips-tdep.c (mips_register_sim_regno): Likewise.
        * m32c-tdep.c (m32c_register_sim_regno): Likewise.
        * frv-tdep.c (frv_register_sim_regno): Likewise.
        * arm-tdep.c (arm_register_sim_regno): Likewise.
        * remote-sim.c (one2one_register_sim_regno): Likewise.

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * configure.ac (--enable-targets): New configure option.
        Collect gdb_target_obs of multiple targets into TARGET_OBS.
        Call configure.tgt multiple times, using $targ as operand.
        * configure.tgt: Operate on $targ instead of $target.
        * configure: Regenerate.
        * Makefile.in (ALL_TARGET_OBS): Define.

        * NEWS: Mention --enable-targets option.

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * mips-tdep.c (show_mipsfpu_command): Do not crash if called when
        current architecture is not MIPS.

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * cli/cli-setshow.c (do_setshow_command): Use dynamically sized buffer
        to construct error message if no argument was supplied.

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * i386nbsd-tdep.c (i386nbsd_aout_supply_regset): Remove.
        (i386nbsd_aout_regset_from_core_section): Likewise.
        (i386nbsd_aout_init_abi): Likewise.
        (_initialize_i386nbsd_tdep): Do not register i386nbsd_aout_init_abi.

        * vaxnbsd-tdep.c (vaxnbsd_aout_init_abi): Remove.
        (_initialize_vaxnbsd_tdep): Do not register vaxnbsd_aout_init_abi.

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * amd64fsdb-tdep.c (amd64fbsd_sigtramp_start_addr): Use ULL suffix.
        (amd64fbsd_sigtramp_end_addr): Likewise.

        * iq2000-tdep.c (iq2000_pointer_to_address): Fix argument type.
        (iq2000_address_to_pointer): Likewise.
        (iq2000_frame_prev_register): Likewise.
        (iq2000_extract_return_value): Use regcache_cooked_read_unsigned
        instead of regcache_cooked_read into CORE_ADDR variable.
        (iq2000_return_value): Fix argument types.

        * m32r-rom.c (m32r_load_section): Fix printf argument type.
        (m32r_load): Likewise.

        * m68kbsd-tdep.c: Include "gdbtypes.h".
        * Makefile.in: Update dependencies.

        * mn10300-tdep.c (mn10300_frame_unwind_cache): Fix aliasing violation.

        * nto-tdep.c (LM_ADDR): Do not refer to no-longer-existing
        lmo->l_addr_size element.

        * remote-m32r-sdi.c (m32r_xfer_memory): Use paddr to print address.
        (m32r_insert_breakpoint): Likewise.
        (m32r_remove_breakpoint): Likewise.
        (m32r_insert_watchpoint): Likewise.
        (m32r_remove_watchpoint): Likewise.
        (m32r_load): Fix printf argument type.

        * xtensa-tdep.c (xtensa_regset_from_core_section): Fix printf
        argument type.
        (xtensa_frame_this_id): Do not cast pointers to "int" for output.
        (xtensa_frame_prev_register): Likewise.
        (xtensa_push_dummy_call): Likewise.

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/alpha/alpha-linux.mt: Remove file.
        * config/alpha/alpha.mt: Remove file.
        * config/alpha/alpha-osf1.mt: Remove file.
        * config/alpha/fbsd.mt: Remove file.
        * config/alpha/nbsd.mt: Remove file.
        * config/alpha/obsd.mt: Remove file.
        * config/arm/embed.mt: Remove file.
        * config/arm/linux.mt: Remove file.
        * config/arm/nbsd.mt: Remove file.
        * config/arm/obsd.mt: Remove file.
        * config/arm/wince.mt: Remove file.
        * config/avr/avr.mt: Remove file.
        * config/cris/cris.mt: Remove file.
        * config/frv/frv.mt: Remove file.
        * config/h8300/h8300.mt: Remove file.
        * config/i386/cygwin.mt: Remove file.
        * config/i386/fbsd64.mt: Remove file.
        * config/i386/fbsd.mt: Remove file.
        * config/i386/i386gnu.mt: Remove file.
        * config/i386/i386.mt: Remove file.
        * config/i386/i386sol2.mt: Remove file.
        * config/i386/linux64.mt: Remove file.
        * config/i386/linux.mt: Remove file.
        * config/i386/mingw.mt: Remove file.
        * config/i386/nbsd64.mt: Remove file.
        * config/i386/nbsd.mt: Remove file.
        * config/i386/nto.mt: Remove file.
        * config/i386/obsd64.mt: Remove file.
        * config/i386/obsd.mt: Remove file.
        * config/i386/sol2-64.mt: Remove file.
        * config/ia64/ia64.mt: Remove file.
        * config/ia64/linux.mt: Remove file.
        * config/iq2000/iq2000.mt: Remove file.
        * config/m32c/m32c.mt: Remove file.
        * config/m32r/linux.mt: Remove file.
        * config/m32r/m32r.mt: Remove file.
        * config/m68hc11/m68hc11.mt: Remove file.
        * config/m68k/linux.mt: Remove file.
        * config/m68k/monitor.mt: Remove file.
        * config/m68k/nbsd.mt: Remove file.
        * config/m68k/obsd.mt: Remove file.
        * config/m88k/obsd.mt: Remove file.
        * config/mep/mep.mt: Remove file.
        * config/mips/embed.mt: Remove file.
        * config/mips/irix5.mt: Remove file.
        * config/mips/irix6.mt: Remove file.
        * config/mips/linux.mt: Remove file.
        * config/mips/nbsd.mt: Remove file.
        * config/mips/obsd64.mt: Remove file.
        * config/mn10300/linux.mt: Remove file.
        * config/mn10300/mn10300.mt: Remove file.
        * config/mt/mt.mt: Remove file.
        * config/pa/hppahpux.mt: Remove file.
        * config/pa/hppa.mt: Remove file.
        * config/pa/linux.mt: Remove file.
        * config/pa/obsd.mt: Remove file.
        * config/powerpc/aix.mt: Remove file.
        * config/powerpc/linux.mt: Remove file.
        * config/powerpc/nbsd.mt: Remove file.
        * config/powerpc/obsd.mt: Remove file.
        * config/powerpc/ppc-eabi.mt: Remove file.
        * config/s390/s390.mt: Remove file.
        * config/score/embed.mt: Remove file.
        * config/sh/embed.mt: Remove file.
        * config/sh/linux.mt: Remove file.
        * config/sh/nbsd.mt: Remove file.
        * config/sh/obsd.mt: Remove file.
        * config/sh/sh64.mt: Remove file.
        * config/sparc/embed.mt: Remove file.
        * config/sparc/fbsd.mt: Remove file.
        * config/sparc/linux64.mt: Remove file.
        * config/sparc/linux.mt: Remove file.
        * config/sparc/nbsd64.mt: Remove file.
        * config/sparc/nbsd.mt: Remove file.
        * config/sparc/obsd64.mt: Remove file.
        * config/sparc/obsd.mt: Remove file.
        * config/sparc/sol2-64.mt: Remove file.
        * config/sparc/sol2.mt: Remove file.
        * config/sparc/sparc64.mt: Remove file.
        * config/sparc/sparc.mt: Remove file.
        * config/spu/spu.mt: Remove file.
        * config/v850/v850.mt: Remove file.
        * config/vax/nbsd.mt: Remove file.
        * config/vax/obsd.mt: Remove file.
        * config/vax/vax.mt: Remove file.
        * config/xstormy16/xstormy16.mt: Remove file.
        * config/xtensa/xtensa.mt: Remove file.

        * configure.tgt (gdb_target_cpu): Remove.  Do not set anywhere.
        (gdb_target): Likewise.
        (gdb_target_obs): Document.  Set for every target to contents
        of TDEPFILES in former .mt makefile fragment.

        * configure.ac (TARGET_OBS): Define.
        (target_makefile_frag, gdb_target_cpu): Do not define.
        * configure: Regenerate.

        * Makefile.in (MT_FLAGS): Remove.
        (GLOBAL_CFLAGS): Update.
        (TARGET_OBS): Substitute from configure.
        (DEPFILES): Remove TDEPFILES, add TARGET_OBS.
        (@target_makefile_frag@): Remove.

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/arm/embed.mt (SIM_OBS, SIM): Remove.
        * config/avr/avr.mt (SIM_OBS, SIM): Remove.
        * config/frv/frv.mt (SIM_OBS, SIM): Remove.
        * config/h8300/h8300.mt (SIM_OBS, SIM): Remove.
        * config/iq2000/iq2000.mt (SIM_OBS, SIM): Remove.
        * config/m32c/m32c.mt (SIM_OBS, SIM): Remove.
        * config/m32r/linux.mt (SIM_OBS, SIM): Remove.
        * config/m32r/m32r.mt (SIM_OBS, SIM): Remove.
        * config/m68hc11/m68hc11.mt (SIM_OBS, SIM): Remove.
        * config/mips/embed.mt (SIM_OBS, SIM): Remove.
        * config/mips/linux.mt (SIM_OBS, SIM): Remove.
        * config/mips/nbsd.mt (SIM_OBS, SIM): Remove.
        * config/mn10300/mn10300.mt (SIM_OBS, SIM): Remove.
        * config/powerpc/linux.mt (SIM_OBS, SIM): Remove.
        * config/powerpc/nbsd.mt (SIM_OBS, SIM): Remove.
        * config/powerpc/ppc-sim.mt: Remove file.
        * config/sh/embed.mt (SIM_OBS, SIM): Remove.
        * config/sh/linux.mt (SIM_OBS, SIM): Remove.
        * config/sh/nbsd.mt (SIM_OBS, SIM): Remove.
        * config/sh/sh64.mt (SIM_OBS, SIM): Remove.
        * config/sparc/embed.mt (SIM_OBS, SIM): Remove.
        * config/v850/v850.mt (SIM_OBS, SIM): Remove.
        * config/xstormy16/xstormy16.mt (SIM_OBS, SIM): Remove.

        * configure.tgt (gdb_sim): Document variable.
        (arm*-*-* | thumb*-*-* | strongarm*-*-* | xscale-*-*): Set it.
        (avr-*-*): Likewise.
        (frv-*-*): Likewise.
        (h8300-*-*): Likewise.
        (iq2000-*-*): Likewise.
        (m32c-*-*): Likewise.
        (m32r*-*-linux*): Likewise.
        (m32r*-*-*): Likewise.
        (m68hc11*-*-*|m6811*-*-*): Likewise.
        (mips*-*-*): Likewise.
        (mips*-*-linux*): Likewise.
        (mips*-*-netbsd* | mips*-*-knetbsd*-gnu): Likewise.
        (mn10300-*-*): Likewise.
        (powerpc-*-linux* | powerpc64-*-linux*): Likewise.
        (powerpc-*-netbsd* | powerpc-*-knetbsd*-gnu): Likewise.
        (powerpc*-*-*): Use ppc-eabi target.  Conditionally set gdb_sim.
        (sh*): Set gdb_sim.
        (sh-*-linux*): Likewise.
        (sh*-*-netbsdelf* | sh*-*-knetbsd*-gnu): Likewise.
        (sh64-*-elf*): Likewise.
        (sparc-*-rtems*): Likewise.
        (v850*-*-elf): Likewise.
        (xstormy16-*-*): Likewise.

        * configure.ac (IGNORE_SIM, IGNORE_SIM_OBS): Do not set.
        (SIM, SIM_OBS): Set depending on ${ignore_sim} and ${gdb_sim}.
        * configure: Regenerate.
        * Makefile.in (SIM, SIM_OBS): Substitute from configure.
        (@IGNORE_SIM@, @IGNORE_SIM_OBS@): Remove.

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * configure.tgt (gdb_osabi, build_gdbserver): Comment variables.
        (arm*-*-*): Do not set obsolete build_rdi_share variable.

        (*-*-freebsd* | *-*-kfreebsd*-gnu): Remove generic case, replace by ...
        (alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
        (i[34567]86-*-freebsd* | i[34567]86-*-kfreebsd*-gnu)
        (sparc*-*-freebsd* | sparc*-*-kfreebsd*-gnu): ... specific cases.
        (x86_64-*-freebsd* | x86_64-*-kfreebsd*-gnu): Re-sort.

        (xscale-*-*): Merge into arm*-*-* case.
        (fido-*-elf*): Merge into m68*-*-elf* case.
        (m68*-*-aout*, m68*-*-coff*, m68*-*-elf*, m68*-*-rtems*,
        m68*-*-uclinux*): Merge cases.
        (powerpc-*-linux*, powerpc64-*-linux*): Merge cases.
        (sh-*-coff*, sh-*-elf*): Merge into sh* case. 

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * configure.tgt: Reformat main case statement.

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * configure.ac (hostfile, targetfile): Remove.
        (GDB_XM_FILE, GDB_TM_FILE): Do not define.
        (xm_h, tm_h): Likewise.
        (DEPRECATED_TM_FILE, XM_FILE): Do not substitute into Makefile.
        * configure, config.in: Regenerate.

        * Makefile.in (xm_h, tm_h): Remove.  Update dependencies.
        (TAGS): Do not consider DEPRECATED_TM_FILE or XM_FILE.
        (clean, local-maintainer-clean): Do not remove xm.h or tm.h.
        * defs.h: Do not include "xm.h" or "tm.h".

        * gdbarch.sh (verify_gdbarch): Do not dump GDB_XM_FILE or GDB_TM_FILE.
        * gdbarch.c: Regenerate.

        * config/score/embed.mt: Remove obsolete comment.

2007-11-16  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (cannot_fetch_register, cannot_store_register): Add gdbarch
        as parameter.
        * gdbarch.{c,h}: Regenerate.

        * alpha-tdep.c (alpha_cannot_fetch_register)
        (alpha_cannot_store_register): Add gdbarch as parameter. Replace 
        current_gdbarch by gdbarch.
        * cris-tdep.c (cris_cannot_fetch_register, cris_cannot_store_register)
        (crisv32_cannot_fetch_register)
        (crisv32_cannot_store_register): Likewise.
        * arch-utils.c (cannot_register_not): Likewise.
        * arch-utils.h (cannot_register_not): Likewise.
        * hppa-tdep.c (hppa32_cannot_store_register)
        (hppa32_cannot_store_register, hppa64_cannot_store_register)
        (hppa64_cannot_fetch_register): Likewise.
        * mipsnbsd-tdep.c (mipsnbsd_cannot_fetch_register)
        (mipsnbsd_cannot_store_register): Likewise.

2007-11-16  Markus Deuling  <deuling@de.ibm.com>

        * m32r-rom.c (m32r_supply_register): Use get_regcache_arch to get at
        the current architecture by regcache.
        * ppcnbsd-nat.c (ppcnbsd_supply_pcb): Likewise.
        * ppc-linux-nat.c (fetch_altivec_register, fetch_spe_register)
        (fetch_register, supply_vrregset, fetch_ppc_registers)
        (store_altivec_register, store_spe_register, store_register)
        (fill_vrregset, store_ppc_registers): Likewise.
        * ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise.
        * win32-nat.c (do_win32_fetch_inferior_registers)
        (do_win32_store_inferior_registers): Likewise.
        * procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
        * remote-m32r-sdi.c (m32r_fetch_registers)
        (m32r_store_registers): Likewise.
        * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Likewise.

        * trad-frame.c (trad_frame_alloc_saved_regs): Replace current_gdbarch by
        gdbarch.
        * user-regs.c (user_reg_map_name_to_regnum): Likewise.
        * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call)
        (do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call)
        (ppc64_sysv_abi_return_value): Likewise.
        * m32c-tdep.c (m32c_register_reggroup_p): Likewise.
        * m2-lang.c (build_m2_types): Likewise.
        * ppc-linux-tdep.c (ppc_linux_sigtramp_cache
        * ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise.
        * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
        * rs6000-tdep.c (ppc_dwarf2_frame_init_reg): Likewise.

        * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Use get_frame_arch to
        get at the current architecture by frame_info.
        * gcore.c (derive_stack_segment): Likewise.

        * shnbsd-nat.c (GETREGS_SUPPLIES): Add gdbarch parameter.
        (shnbsd_fetch_inferior_registers, shnbsd_store_inferior_registers): Add
        gdbarch to GETREGS_SUPPLIES call.

2007-11-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * elfread.c (ST_REGULAR, ST_DYNAMIC, ST_SYNTHETIC): New defines.
        (elf_symtab_read): Rename DYNAMIC argument to TYPE.  Do not access
        ELF-private symbol data when processing synthetic symbols.  Use
        udata.p to get at size of ppc64 synthetic 'dot' symbols.
        (elf_symfile_read): Pass TYPE argument to elf_symtab_read.

2007-11-15  Doug Evans  <dje@google.com>

        * buildsym.h (subfiles): Move ...
        * buildsym.c (subfiles): ... to here and make static.

        * symmisc.c (maintenance_info_symtabs): Print linetable info.

2007-11-15  Markus Deuling  <deuling@de.ibm.com>

        * mipsnbsd-tdep.h (SIZEOF_STRUCT_REG, SIZEOF_STRUCT_FPREG): Remove

2007-11-15  Markus Deuling  <deuling@de.ibm.com>

        * arm-tdep.c (arm_prologue_this_id): Replace LOWEST_PC by its
        expression and use get_frame_arch to replace current_gdbarch by frame's
        architecture.
        * arm-tdep.h (LOWEST_PC): Remove

2007-11-15  Vladimir Prus  <vladimir@codesourcery.com>

        Apply const qualifier to some users of bp_location.
        * breakpoint.h (struct bpstats): Make
        the breakpoint_at field point at const bp_location.
        * breakpoint.c (bpstat_alloc): Accept const
        bp_location.
        (breakpoint_here_p, breakpoint_inserted_here_p)
        (software_breakpoint_inserted_here_p)
        (breakpoint_thread_match, bpstat_stop_status)
        (read_memory_nobpt, bpstat_have_active_hw_watchpoints): Use
        const bp_location for iteration.
        (print_it_typical, print_bp_stop_message): Use
        const bp_location variable.

2007-11-15  Vladimir Prus  <vladimir@codesourcery.com>

        Make mark_breakpoints_out static.
        * breakpoint.h (mark_breakpoints_out): Remove
        declaration.
        * breakpoint.c (mark_breakpoints_out): Make static.

2007-11-15  Vladimir Prus  <vladimir@codesourcery.com>

        Prevent clear_command from directly modifying breakpoint list.
        * Makefile.in (breakpoint_h): Update dependency.
        * breakpoint.c (clear_command): Do not remove
        breakpoints from breakpoint_chain.  Collect breakpoints
        to delete in a vector.
        * breakpoint.h (breakpoint_p): New typedef for pointer to
        breakpoint.  Register vector of breakpoint_p.

2007-11-15  Vladimir Prus  <vladimir@codesourcery.com>

        Remove 'run_cleanup'.
        * defs.h (do_run_cleanups, make_run_cleanup): Remove
        declarations.
        * infcmd.c (run_command_1): Call clear_solib instead
        of do_run_cleanups.
        * jv-lang.c (java_rerun_cleanup): Remove, for lack of
        any use.
        * solib.c (solib_cleanup_queued, do_clear_solib): Remove.
        (update_solib_lib): Don't setup run cleanup.
        (no_shared_libraries): Call clear_solib, not do_clear_solib.
        * utils.c (run_cleanup_chain, make_run_cleanup)
        (do_run_cleanups): Remove.
                
2007-11-15  Vladimir Prus  <vladimir@codesourcery.com>

        Remove CLEAR_SOLIB use.
        * corelow.c (core_close): Don't check for CLEAR_SOLIB.
        * infcmd.c (attach_command): Likewise.
        
2007-11-14  Doug Evans  <dje@google.com>

        * buildsym.c (start_subfile,start_symtab): Doc fixes.

2007-11-13  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * tui/tui-data.c (tui_prev_win): Guard against NULL.

2007-11-12  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (gdbarch_alloc): Replace current_gdbarch by gdbarch. Remove
        obsolete comment.
        (verify_gdbarch, gdbarch_dump): Likewise.
        (do_read): Update comment.
        (addr_bit, bfd_arch_info, target_desc, long_long_bit, floatformat)
        (ptr_bit, name_of_malloc): Replace current_gdbarch by gdbarch.
        * gdbarch.{c,h}: Regenerate.

2007-11-12  Markus Deuling  <deuling@de.ibm.com>

        * xtensa-tdep.c (ARG_1ST): Replace ARGS_FIRST_REG by its expression.
        (ARGS_FIRST_REG): Remove.
        (areg_numer): New function.
        (xtensa_pseudo_register_read, xtensa_frame_prev_register)
        (xtensa_extract_return_value, xtensa_store_return_value)
        (xtensa_frame_cache): Replace AREG_NUMBER by areg_number.
        (AREG_NUMBER): Remove.
        (XTENSA_IS_ENTRY, ARG_NOF, ARG_1ST): Add gdbarch as parameter.
        (xtensa_frame_cache): Update use of XTENSA_IS_ENTRY.
        (xtensa_push_dummy_call): Update use of ARG_NOF.
        (extract_call_winsize): Add gdbarch as parameter. Replace
        current_gdbarch by gdbarch.
        (xtensa_extract_return_value, xtensa_store_return_value): Update call
        of extract_call_winsize.

2007-11-10  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Add entry for new set/show print frame-args command.

2007-11-09  Kevin Buettner  <kevinb@redhat.com>

        * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add missing
        register number to map.  Adjust warning check and error/warning
        return value code to match expectations of this function's callers.

2007-11-09  Joel Brobecker  <brobecker@adacore.com>

        * stack.c (print_this_frame_argument_p): Handle arguments passed
        by reference properly.

2007-11-09  Joel Brobecker  <brobecker@adacore.com>

        * stack.c (print_frame_arguments_choices): New static global.
        (print_frame_arguments): Likewise.
        (print_this_frame_argument_p): New function.
        (print_frame_args): Print the argument value only when appropriate.
        (_initialize_task): Add new "set/show print frame-arguments" command.

2007-11-09  Luis Machado  <luisgpm@br.ibm.com>

        * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Move
        saved_dabr_value assignment to the correct position.
                
2007-11-09  Markus Deuling  <deuling@de.ibm.com>

        * arch-utils.c (generic_convert_register_p): Add gdbarch as parameter.
        * arch-utils.h (generic_convert_register_p): Likewise.

2007-11-09  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (convert_register_p): Add gdbarch as parameter.
        * ia64-tdep.c (ia64_convert_register_p): Likewise.
        * i387-tdep.c (i387_convert_register_p): Likewise.
        * i387-tdep.h (i387_convert_register_p): Likewise.
        * alpha-tdep.c (alpha_convert_register_p): Likewise.
        * gdbarch.{c,h}: Regenerate.

        * rs6000-tdep.c (rs6000_convert_register_p): Add gdbarch as parameter.
        Replace current_gdbarch by gdbarch.
        * mips-tdep.c (mips_convert_register_p): Likewise.
        * m68k-tdep.c (m68k_convert_register_p): Likewise.
        * i386-tdep.c (i386_convert_register_p): Likewise.

2007-11-08  Aleksandar Ristovski  <aristovski@qnx.com>

        * gdb_string.h: Include <strings.h>.

2007-11-08  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (break_command_1): Remove
        pending_bp parameter.
        (create_breakpoint): Likewise.
        (create_breakpoints): Likewise. Adjust call to
        create_breakpoint.
        (break_command_1): Likewise. Adjust call to
        create_breakpoints.
        (do_captured_breakpoint): Adjust call to
        create_breakpoints.
        (break_command, tbreak_command, hbreak_command)
        (stopin_command, stopat_command): Adjust call
        to break_command_1.
                        
2007-11-07  Joseph Myers  <joseph@codesourcery.com>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Right-align
        struct values smaller than one doubleword; left-align those
        larger.  Pass structs containing a single floating-point value in
        registers.

2007-11-07  Joseph Myers  <joseph@codesourcery.com>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * gdbtypes.c (floatformats_ibm_long_double): New.
        * gdbtypes.h (floatformats_ibm_long_double): Declare.
        * ia64-tdep.c (floatformat_ia64_ext): Update for addition of
        split_half field.
        * mips-tdep.c (n32n64_floatformat_always_valid,
        floatformat_n32n64_long_double_big, floatformats_n32n64_long):
        Remove.
        (mips_gdbarch_init): Use floatformats_ibm_long_double instead of
        floatformats_n32n64_long.
        * ppc-linux-tdep.c (ppc_linux_init_abi): Use 128-bit IBM long
        double.
        * doublest.c (convert_floatformat_to_doublest,
        convert_doublest_to_floatformat): Handle split floating-point
        formats.
        * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Handle IBM long
        double arguments.
        (ppc64_sysv_abi_push_dummy_call): Likewise.
        (do_ppc_sysv_return_value): Handle IBM long double return.

2007-11-07  Vladimir Prus  <vladimir@codesourcery.com>

        Fix crash when a variable object being deleted
        has any of its children deleted previously.
        
        * varobj.c (delete_variable_1): Don't recurse
        into deleted children.
        
2007-11-07  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (legacy_virtual_frame_pointer): Add gdbarch parameter.
        * gdbarch.{c,h}: Regenerate.
        * arch-utils.c (legacy_virtual_frame_pointer): Add gdbarch parameter.
        Replace current_gdbarch by gdbarch.
        * m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
        * mips-tdep.c (mips_virtual_frame_pointer): Likewise.
        * spu-tdep.c (spu_virtual_frame_pointer): Likewise.

2007-11-07  Markus Deuling  <deuling@de.ibm.com>

        * shnbsd-tdep.c (shnbsd_supply_gregset, shnbsd_collect_gregset): Use
        get_regcache_arch to get at the current architecture by regcache.
        * xstormy16-tdep.c (xstormy16_frame_prev_register): Use get_frame_arch
        to get at the current architecture by frame_info.
        * fbsd-nat.c (fbsd_make_corefile_notes): Use get_regcache_arch to get
        at the current architecture by regcache.
        * gnu-v3-abi.c (gnuv3_skip_trampoline): Use get_frame_arch to get at
        the current architecture by frame_info.
        (build_gdb_vtable_type): Replace current_gdbarch by gdbarch.
        * aix-thread.c (special_register_p): Add gdbarch as parameter.
        (fetch_regs_kernel_thread, store_regs_kernel_thread): Add gdbarch to
        caller of special_register_p.

2007-11-07  Markus Deuling  <deuling@de.ibm.com>

        * infcall.c (call_function_by_hand): Use get_frame_arch to get at the
        current architecture by frame_info.

2007-11-07  Markus Deuling  <deuling@de.ibm.com>

        * xtensa-tdep.h (SIZEOF_GREGSET, XTENSA_ELF_NGREG) Remove.

2007-11-07  Markus Deuling  <deuling@de.ibm.com>

        * s390-nat.c (supply_gregset, fill_gregset): Use get_regcache_arch to
        get at the current architecture by regcache.
        (SUBOFF): Add gdbarch to macro definition.

2007-11-07  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (breakpoint_from_pc): Add gdbarch parameter.
        * gdbarch.{c,h}: Regenerate.

        * xtensa-tdep.c (xtensa_breakpoint_from_pc): Add gdbarch parameter.
        Replace current_gdbarch by gdbarch.
        * sh-tdep.c (sh_breakpoint_from_pc): Likewise.
        * sh64-tdep.c (sh64_breakpoint_from_pc): Likewise.
        * score-tdep.c (score_breakpoint_from_pc): Likewise.
        * mips-tdep.c (mips_breakpoint_from_pc): Likewise.
        * m32r-tdep.c (m32r_breakpoint_from_pc): Likewise.
        * iq2000-tdep.c (iq2000_breakpoint_from_pc): Likewise.
        * arm-tdep.c (arm_breakpoint_from_pc): Likewise.

        * xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Add gdbarch
        parameter.
        * vax-tdep.c (vax_breakpoint_from_pc): Likewise.
        * v850-tdep.c (v850_breakpoint_from_pc): Likewise.
        * spu-tdep.c (spu_breakpoint_from_pc): Likewise.
        * sparc-tdep.c (sparc_breakpoint_from_pc): Likewise.
        * s390-tdep.c (s390_breakpoint_from_pc): Likewise.
        * mn10300-tdep.c (mn10300_breakpoint_from_pc): Likewise.
        * mt-tdep.c (mt_breakpoint_from_pc): Likewise.
        * mep-tdep.c (mep_breakpoint_from_pc): Likewise.
        * m88k-tdep.c (m88k_breakpoint_from_pc): Likewise.
        * m68hc11-tdep.c (m68hc11_breakpoint_from_pc): Likewise.
        * m32c-tdep.c (m32c_breakpoint_from_pc): Likewise.
        * ia64-tdep.c (ia64_breakpoint_from_pc): Likewise.
        * i386-tdep.c (i386_breakpoint_from_pc): Likewise.
        * hppa-tdep.c (hppa_breakpoint_from_pc): Likewise.
        * h8300-tdep.c (h8300_breakpoint_from_pc): Likewise.
        * frv-tdep.c (frv_breakpoint_from_pc): Likewise.
        * cris-tdep.c (cris_breakpoint_from_pc): Likewise.
        * avr-tdep.c (avr_breakpoint_from_pc): Likewise.
        * alpha-tdep.c (alpha_breakpoint_from_pc): Likewise.
        * m68k-tdep.c (m68k_local_breakpoint_from_pc): Likewise.

        * rs6000-tdep.c (rs6000_breakpoint_from_pc): Add gdbarch parameter.
        Replace current_gdbarch by gdbarch.
        (rs6000_software_single_step): Use get_frame_arch to get at the
        current architecture by frame_info. Add gdbarch to
        rs6000_breakpoint_from_pc call.

2007-11-07  Markus Deuling  <deuling@de.ibm.com>

        * frv-tdep.c (frv_register_name, frv_check_watch_resources): Replace
        macro CURRENT_VARIANT by its expression.
        (CURRENT_VARIANT): Remove.
        (frv_check_watch_resources): Add gdbarch parameter.

2007-11-07  Markus Deuling  <deuling@de.ibm.com>

        * MAINTAINERS (Write After Approval): Add self.

2007-11-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * features/rs6000/power-core.xml: Use uint32 as register type.
        * features/rs6000/power64-core.xml: Use uint64/uint32 as register type.
        * features/rs6000/powerpc-32.c: Regenerate.
        * features/rs6000/powerpc-403.c: Regenerate.
        * features/rs6000/powerpc-403gc.c: Regenerate.
        * features/rs6000/powerpc-505.c: Regenerate.
        * features/rs6000/powerpc-602.c: Regenerate.
        * features/rs6000/powerpc-603.c: Regenerate.
        * features/rs6000/powerpc-604.c: Regenerate.
        * features/rs6000/powerpc-64.c: Regenerate.
        * features/rs6000/powerpc-7400.c: Regenerate.
        * features/rs6000/powerpc-750.c: Regenerate.
        * features/rs6000/powerpc-860.c: Regenerate.
        * features/rs6000/powerpc-e500.c: Regenerate.

2007-11-05  Joel Brobecker  <brobecker@adacore.com>

        * breakpoint.c (set_raw_breakpoint_without_location): Make static.

2007-11-05  Joel Brobecker  <brobecker@adacore.com>

        * breakpoint.h (create_solib_load_event_breakpoint)
        (create_solib_unload_event_breakpoint)
        (create_fork_event_catchpoint, create_vfork_event_catchpoint)
        (create_exec_event_catchpoint): Delete declaration.
        * breakpoint.c (create_solib_load_event_breakpoint)
        (solib_load_unload_1, create_solib_unload_event_breakpoint): Delete.
        (create_fork_event_catchpoint, create_vfork_event_catchpoint)
        (create_exec_event_catchpoint): Make static.

2007-11-05  Joel Brobecker  <brobecker@adacore.com>

        * breakpoint.h (set_breakpoint_sal): Remove declaration.
        * breakpoint.c (set_breakpoint_sal): Delete.

2007-11-05  Joel Brobecker  <brobecker@adacore.com>

        * buildsym.c (finish_block): Remove "#if 1"/"#endif" brackets.
        (make_blockvector): Likewise. Remove FIXME comment.

2007-11-05  Luis Machado  <luisgpm@br.ibm.com>

        * printcmd.c: (printf_command): Add support for new DFP
        modifiers %H, %D and %DD.
        * configure.ac: Add check for DECFLOAT printf support.
        * configure: Regenerated.

2007-11-02  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (struct cplus_struct_type): Remove runtime_ptr member.
        (TYPE_RUNTIME_PTR, TYPE_VTABLE, TYPE_HAS_VTABLE,
        TYPE_PRIMARY_BASE, TYPE_VIRTUAL_BASE_LIST): Remove macros.
        (HP_ACC_VFUNC_START, HP_ACC_VBASE_START, HP_ACC_TYPEINFO_OFFSET,
        HP_ACC_TOP_OFFSET_OFFSET): Likewise.
        (has_vtable, primary_base_class, virtual_base_list_length,
        virtual_base_list_length_skip_primaries, virtual_base_index,
        virtual_base_index_skip_primaries, class_index_in_primary_list,
        count_virtual_fns): Remove prototypes.
        * gdbtypes.c (has_vtable, primary_base_class, current_vbase_list,
        virtual_base_list_aux, virtual_base_list, virtual_base_list_length,
        virtual_base_list_length_skip_primaries, virtual_base_index,
        virtual_base_index_skip_primaries, class_index_in_primary_list,
        count_virtual_fns): Remove.

        * cp-valprint.c (cp_print_hpacc_virtual_table_entries): Remove.
        (hpacc_vtbl_ptr_name, hpacc_vtbl_ptr_type_name): Remove.
        (cp_print_value_fields): Remove support for HP aCC vtables.
        (cp_print_value): Likewise.
        * c-typeprint.c (c_type_print_base): Likewise.

        * value.h (find_rt_vbase_offset): Remove prototype.
        * valops.c (find_rt_vbase_offset): Remove.
        (search_struct_method): Remove support for HP aCC vtables.
        (find_method_list): Likewise.

2007-11-02  Ulrich Weigand  <uweigand@de.ibm.com>

        * language.h (struct language_defn): Remove la_builtin_type_vector
        and string_char_type members.
        * language.c (language_string_char_type): No longer consult
        la->string_char_type.
        (language_lookup_primitive_type_by_name): No longer consult
        current_language->la_builtin_type_vector.

        * language.c (unknown_language_defn, auto_language_defn,
        local_language_defn): Adapt initializer.
        * ada-lang.c (ada_language_defn): Likewise.
        * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn,
        minimal_language_defn): Likewise.
        * f-lang.c (f_language_defn): Likewise.
        * jv-lang.c (java_language_defn): Likewise.
        * m2-lang.c (m2_language_defn): Likewise.
        * objc-lang.c (objc_language_defn): Likewise.
        * p-lang.c (pascal_language_defn): Likewise.
        * scm-lang.c (scm_language_defn): Likewise.

2007-11-02  Markus Deuling  <deuling@de.ibm.com>

        * frame.c (frame_id_inner): Add gdbarch parameter. Replace
        current_gdbarch by gdbarch.
        (frame_find_by_id, get_prev_frame_1): Use get_frame_arch to get at the
        current architecture by frame_info.
        * frame.h (frame_id_inner): Add gdbarch parameter.
        * stack.c (return_command): Use get_frame_arch to get at the current
        architecture by frame_info. Update call of frame_id_inner.
        * infrun.c (handle_inferior_event): Likewise.
        * dummy-frame.c (dummy_frame_push):  Use get_regcache_arch to get at the
        current architecture by regcache. Update call of frame_id_inner.

2007-11-02  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (register_name): Add gdbarch parameter.
        * gdbarch.{c,h}: Regenerate.

        * target-descriptions.c (tdesc_register_name): Add gdbarch parameter.
        (tdesc_register_name): Replace current_gdbarch by gdbarch.
        * target-descriptions.h (tdesc_register_name): Add gdbarch parameter.

        * xstormy16-tdep.c (xstormy16_register_name): Add gdbarch parameter.
        * vax-tdep.c (vax_register_name): Add gdbarch parameter.
        * spu-tdep.c (spu_register_name): Add gdbarch parameter.
        * s390-tdep.c (s390_register_name): Add gdbarch parameter.
        * mt-tdep.c (mt_register_name): Add gdbarch parameter.
        (mt_registers_info): Replace current_gdbarch by gdbarch.
        (mt_register_reggroup_p): Add gdbarch to mt_register_name call.
        * mips-tdep.c (mips_register_name): Add gdbarch parameter. Replace
        current_gdbarch by gdbarch.
        (mips_register_name): Add gdbarch to tdesc_register_name call.
        * mep-tdep.c (mep_register_name): Add gdbarch parameter. Replace
        current_gdbarch by gdbarch.
        (mep_register_reggroup_p): Add gdbarch to mep_register_name call.
        * m32c-tdep.c (m32c_register_name): Add gdbarch parameter. Replace
        current_gdbarch by gdbarch.
        * m88k-tdep.c (m88k_register_name): Add gdbarch parameter.
        * m68k-tdep.c (m68k_register_name): Add gdbarch parameter.
        * m32r-tdep.c (m32r_register_name): Add gdbarch parameter.
        (m32r_frame_unwind_cache): Use get_frame_arch to get at the current
        architecture by frame_info.
        * iq2000-tdep.c (iq2000_register_name): Add gdbarch parameter.
        * ia64-tdep.c (ia64_register_name): Add gdbarch parameter.
        * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Add gdbarch
        parameter.
        * h8300-tdep.c (h8300_register_name, h8300s_register_name)
        (h8300sx_register_name): Add gdbarch parameter.
        * cris-tdep.c (cris_register_name, crisv32_register_name): Add
        gdbarch parameter. Replace current_gdbarch by gdbarch.
        (cris_gdbarch_init): Replace current_gdbarch by gdbarch (comment).
        * avr-tdep.c (avr_register_name): Add gdbarch parameter.
        * arm-tdep.c (arm_register_name): Add gdbarch paramete
        * amd64-tdep.c (amd64_register_name): Add gdbarch parameter. Update
        caller.
        * amd64-tdep.h (amd64_register_name): Add gdbarch parameter.
        * amd64-linux-tdep.c (amd64_linux_register_name): Add gdbarch parameter.
        * alpha-tdep.c (alpha_register_name): Add gdbarch parameter.
        (alpha_cannot_fetch_register, alpha_cannot_store_register): Update call
        of alpha_register_name.
        * frv-tdep.c (frv_register_name): Add gdbarch parameter.
        * i386-tdep.c (i386_register_name): Add gdbarch parameter. Replace
        current_gdbarch by gdbarch.
        (i386_register_type): Replace ?current_gdbarch by gdbarch.
        * i386-tdep.h (i386_register_name): Add gdbarch parameter.
        * i386-linux-tdep.c (i386_linux_register_name): Add gdbarch parameter.

        * m68hc11-tdep.c (m68hc11_register_name): Add gdbarch parameter.
        (m68hc11_register_reggroup_p): Add gdbarch to call of
        m68hc11_register_name.
        * mn10300-tdep.c (mn10300_generic_register_name, am33_register_name)
        (am33_2_register_name): Add gdbarch parameter.
        (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
        architecture by frame_info.
        (mn10300_dump_tdep): Replace current_gdbarch by gdbarch.
        * rs6000-tdep.c (rs6000_register_name): Add gdbarch parameter. Replace
        current_gdbarch by gdbarch.
        * score-tdep.c (score_register_name): Add gdbarch parameter.
        (score_return_value, score_push_dummy_call): Replace current_gdbarch
        by gdbarch.
        * sh64-tdep.c (sh64_register_name): Add gdbarch parameter.
        (sh64_compact_reg_base_num, sh64_register_convert_to_virtual)
        (sh64_register_convert_to_raw, sh64_fv_reg_base_num)
        (sh64_dr_reg_base_num, sh64_fpp_reg_base_num): Add gdbarch parameter
        and update caller. Replace current_gdbarch by gdbarch.
        (sh64_extract_return_value, sh64_store_return_value): Use
        get_regcache_arch to get at the current architecture by regcache.
        * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name)
        (sh_sh3e_register_name, sh_sh2e_register_name, sh_sh2a_register_name)
        (sh_sh2a_nofpu_register_name, sh_sh_dsp_register_name)
        (sh_sh3_dsp_register_name, sh_sh4_register_name)
        (sh_sh4_nofpu_register_name, sh_sh4al_dsp_register_name): Add gdbarch
        parameter.
        (fv_reg_base_num, dr_reg_base_num, sh_justify_value_in_reg)
        (sh_next_flt_argreg): Add gdbarch parameter and update caller. Replace
        current_gdbarch by gdbarch.
        (sh_extract_return_value_fpu, sh_store_return_value_fpu): Use
        get_regcache_arch to get at the current architecture by regcache.
        * sparc-tdep.c (sparc32_register_name): Add gdbarch parameter.
        * sparc64-tdep.c (sparc64_register_name): Add gdbarch parameter.
        * v850-tdep.c (v850_register_name, v850e_register_name): Add gdbarch
        parameter.
        (v850_unwind_sp, v850_unwind_pc): Replace current_gdbarch by gdbarch.
        * xtensa-tdep.c (xtensa_register_name): Add gdbarch parameter. Replace
        current_gdbarch by gdbarch.
        (xtensa_pseudo_register_read, xtensa_pseudo_register_write)
        (xtensa_frame_prev_register): Add gdbarch parameter to
        xtensa_register_name call.

2007-10-31  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Fall back to
        find_solib_trampoline_target if PC is not in .plt section.

2007-10-31  Ulrich Weigand  <uweigand@de.ibm.com>

        * elfread.c (elf_symtab_read): When constructing a solib trampoline
        minimal symbol from an undefined dynamic symbol, use proper section.

2007-10-31  Markus Deuling  <deuling@de.ibm.com>

        * arm-linux-nat.c (fetch_register, fetch_regs): Use get_regcache_arch
        to get at the current architecture by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * libunwind-frame.c (libunwind_frame_sniffer)
        libunwind_frame_prev_register, libunwind_sigtramp_frame_sniffer)
        (libunwind_frame_cache): Use get_frame_arch to get at the current
        architecture by frame_info.
        (libunwind_get_reg_special): Replace current_gdbarch by gdbarch.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * iq2000-tdep.c (iq2000_frame_prev_register): Use get_frame_arch to get
        at the current architecture by frame_info.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * inf-child.c (inf_child_fetch_inferior_registers): Use 
        get_regcache_arch to get at the current architecture by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * inf-ptrace.c (inf_ptrace_fetch_registers)
        (inf_ptrace_fetch_register, inf_ptrace_store_register)
        (inf_ptrace_store_registers): Use get_regcache_arch to get at the
        current architecture by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * hpux-thread.c (hpux_thread_fetch_registers)
        (hpux_thread_store_registers): Use get_regcache_arch to get at the
        current architecture by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * hppa-tdep.c (hppa_frame_cache): Use get_frame_arch to get at the
        current architecture by frame_info.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * go32-nat.c (fetch_register, go32_fetch_registers, store_register)
        (go32_store_registers): Use get_regcache_arch to get at the current
        architecture by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * gdbtypes.c (gdbtypes_post_init): Replace current_gdbarch by gdbarch.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Use get_frame_arch
        to get at the current architecture by frame_info.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * f-lang.c (build_fortran_types): Replace current_gdbarch by gdbarch.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * core-regset.c (fetch_core_registers): Use get_regcache_arch to get at
        the current architecture by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * corelow.c (get_core_registers): Use get_regcache_arch to get at the
        current architecture by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * bsd-uthread.c (bsd_uthread_fetch_registers)
        (bsd_uthread_store_registers): Use get_regcache_arch to get at the
        current architecture by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * avr-tdep.c (avr_frame_unwind_cache, avr_frame_prev_register): Use
        get_frame_arch to get at the current architecture by frame_info.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * arm-tdep.c (arm_get_next_pc): Replace current_gdbarch by gdbarch.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * armnbsd-nat.c (arm_supply_gregset, fetch_register, store_register)
        (store_regs): Use get_regcache_arch to get at the current architecture
        by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * arm-linux-tdep.c (arm_linux_supply_gregset): Use get_regcache_arch
        to get at the current architecture by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * alphabsd-nat.c (alphabsd_fetch_inferior_registers)
        (alphabsd_store_inferior_registers): Use get_regcache_arch to get at
        the current architecture by regcache.

2007-10-30  Markus Deuling  <deuling@de.ibm.com>

        * ada-lang.c (ada_language_arch_info): Replace current_gdbarch by
        gdbarch.

2007-10-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Check the selected
        soft float and vector ABIs.  Support the generic vector ABI for
        AltiVec types.
        (do_ppc_sysv_return_value): Likewise.  Correct argument types and
        casts.
        (ppc64_sysv_abi_push_dummy_call): Assert that floating point is
        supported.
        * ppc-tdep.h (enum powerpc_vector_abi): New.
        (struct gdbarch_tdep): Add soft_float and vector_abi.
        * rs6000-tdep.c (setpowerpccmdlist, showpowerpccmdlist)
        (powerpc_soft_float_global, powerpc_vector_strings)
        (powerpc_vector_abi_global, powerpc_vector_abi_string): New.
        (rs6000_gdbarch_init): Check for soft-float and vector ABI markings.
        (set_powerpc_command, show_powerpc_command, powerpc_set_soft_float)
        (powerpc_set_vector_abi): New.
        (_initialize_rs6000_tdep): Register "set powerpc" and "show powerpc"
        commands.
        * Makefile.in (elf_ppc_h): New.
        (rs6000-tdep.o): Update.

2007-10-29  Carlos Eduardo Seo  <cseo@linux.vnet.ibm.com>

        * ppc-linux-tdep.c (ppc32_linux_reg_offsets): Corrected
        swapped offsets and VRSAVE offset.
        (ppc64_linux_reg_offsets): Corrected swapped offsets.
        (ppc32_linux_vrregset): Added.
        (ppc_linux_regset_from_core_section): Added support for
        .reg-ppc-vmx section.
        * ppc-tdep.h (ppc_altivec_support_p): Declare.
        (ppc_supply_vrregset): Declare.
        (ppc_collect_vrregset): Declare.
        * rs6000-tdep.c (ppc_altivec_support_p): Added.
        (ppc_supply_vrregset): Added.
        (ppc_collect_vrregset): Added.
        * corelow.c (get_core_registers): Added support for
        .reg-ppc-vmx section.

2007-10-29  Joel Brobecker  <brobecker@adacore.com>

        GDB 6.7.1 released.

2007-10-26  Jim Blandy  <jimb@codesourcery.com>

        * ax-gdb.h (expr_to_address_and_size): Delete declaration for
        deleted function.

        * tracepoint.c (tracepoint_operation): Report the deletion event
        after we have unlinked the tracepoint from the list, and use the
        proper tracepoint number.

        * ax-gdb.c (expr_to_agent): Delete unused function.
        (expr_to_address_and_size): Delete #if 0'd function.
        * ax-gdb.h (expr_to_agent): Delete declaration.

        * ax-gdb.c (gen_cast): Remove redundant assignment to
        value->type.  Doc fix.

        * ax-general.c (gen_traced_pop, gen_int_literal)
        (gen_usual_arithmetic): Check for typedefs.

2007-10-26  Joel Brobecker  <brobecker@adacore.com>

        * parse.c (prefixify_expression): Minor reformatting.

2007-10-25  Daniel Jacobowitz  <dan@codesourcery.com>

        * version.in: Use dot instead of dash.

2007-10-25  Daniel Jacobowitz  <dan@codesourcery.com>

        * linux-thread-db.c (check_for_thread_db): Only print if info_verbose.

2007-10-25  Pedro Alves  <pedro_alves@portugalmail.pt>

        * memory-map.c (parse_memory_map): Don't use an empty struct
        initializer.

2007-10-25  Pedro Alves  <pedro_alves@portugalmail.pt>

        * signals/signals.c (signals): Update pointer to enum
        target_signal declaration.

2007-10-25  Wu Zhou  <woodzltc@cn.ibm.com>
            Carlos Eduardo Seo  <cseo@linux.vnet.ibm.com>
            Jim Blandy  <jimb@codesourcery.com>

        * dwarf2read.c (read_partial_die): check the value
        of DW_AT_calling_convention in Fortran programs.

2007-10-25  Wu Zhou  <woodzltc@cn.ibm.com> 
            Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * c-exp.y (YYSTYPE): Add typed_val_decfloat for decimal
        floating point in YYSTYPE union.
        (DECFLOAT) Add token and expression element handling code.
        (parse_number): Parse DFP constants, which end with suffix 'df',
        'dd' or 'dl'.  Return DECFLOAT.
        * eval.c (evaluate_subexp_standard): Call value_from_decfloat to
        handle OP_DECFLOAT.
        * expression.h (enum exp_opcode): Add an opcode (OP_DECFLOAT)
        for DFP constants.
        (union exp_element): Add decfloatconst to represent DFP
        elements, which is 16 bytes by default.
        * parse.c (write_exp_elt_decfloatcst): New function to write a
        decimal float const into the expression.
        (operator_length_standard): Set operator length for OP_DECFLOAT
        to 4.
        * parser-defs.h (write_exp_elt_decfloatcst): Prototype.
        * valarith.c (value_neg): Add code to handle the negation
        operation of DFP values.
        * value.c (value_from_decfloat): New function to get the value
        from a decimal floating point.
        * value.h (value_from_decfloat): Prototype.

2007-10-25  Wu Zhou  <woodzltc@cn.ibm.com> 
            Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * c-lang.c (c_create_fundamental_type): Create fundamental
        types for DFP.
        * c-typeprint.c (c_type_print_varspec_prefix): Add
        TYPE_CODE_DECFLOAT to no prefix needed case.
        (c_type_print_varspec_suffix): Add TYPE_CODE_DECFLOAT to no
        suffix needed case.
        * c-valprint.c (c_val_print): Call print_decimal_floating to
        print DFP values.
        * dwarf2read.c (read_base_type): Read DW_ATE_decimal_float
        attribute code and return TYPE_CODE_DECFLOAT.
        (dwarf_base_type): Set dwarf2_fundamental_type for DFP values.
        * gdbtypes.c (gdbtypes_post_init): Initialize builtin_decfloat,
        builtin_decdouble and builtin_declong. 
        * gdbtypes.h (enum type_code): Add TYPE_CODE_DECFLOAT as a
        type code for DFP.
        (FT_DECFLOAT, FT_DBL_PREC_DECFLOAT, FT_EXT_PREC_DECFLOAT): New
        types, for decimal floating point.
        (FT_NUM_MEMBERS):  Increment, new types added.
        (struct builtin_type): Add builtin_decfloat, builtin_decdouble
        and builtin_declong.
        * valprint.c (print_decimal_floating): New function to print DFP
        values.
        * value.h (print_decimal_floating): Prototype.

2007-10-25  Wu Zhou  <woodzltc@cn.ibm.com> 
            Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * Makefile.in (LIBDECNUMBER_DIR, LIBDECNUMBER, LIBDECNUMBER_SRC
        LIBDECNUMBER_CFLAGS): New macros for libdecnumber.
        (INTERNAL_CFLAGS_BASE): Add LIBDECNUMBER_CFLAGS in.
        (INSTALLED_LIBS): Add -ldecnumber in.
        (CLIBS): Add LIBDECNUMBER in.
        (decimal128_h, decimal64_h, decimal32_h): New macros for decimal
        headers.
        (dfp_h): New macros for decimal floating point.
        (dfp.o): New target.
        (COMMON_OBS): Add dfp.o in.
        (c-exp.o): Add dfp_h as dependency.
        (valprint.o): Add dfp_h as dependency.
        (value.o): Add dfp_h as dependency.
        * dfp.h: New header file for decimal floating point support in
        GDB.
        * dfp.c: New source file for decimal floating point support in
        GDB.  Implement decimal_from_string and decimal_to_string based
        on libdecnumber API.
        * configure.ac: Add AC_C_BIGENDIAN test.
        * config.in, configure: Regenerate.

2007-10-25  David Ung  <davidu@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        PR exp/1926
        * infcmd.c (registers_info): Check for a user register before
        calling target's gdbarch_print_registers_info().  If found to be
        so, extract the implicit value of user register and call
        print_scalar_formatted().
        * Makefile.in: (infcmd.o): Add $(user_regs_h).

2007-10-25  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Document status of hppa64-hpux support.

2007-10-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * solib-svr4.c (set_solib_svr4_fetch_link_map_offsets): Call
        set_solib_ops to install SVR4 operations.
        (_initialize_svr4_solib): Do not set current_target_so_ops.

        * config/i386/i386gnu.mh (NATDEPFILES): Move solib.o, solib-svr4.o ...
        * config/i386/i386gnu.mt (TDEPFILES): ... to here.

2007-10-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * solib-svr4.c (legacy_svr4_fetch_link_map_offsets_hook): Remove.
        (solib_svr4_init): Initialize fetch_link_map_offsets to NULL.
        * solib-svr4.h (legacy_svr4_fetch_link_map_offsets_hook): Remove.
        * solib-legacy.c: Remove file.

        * config/alpha/alpha-linux.mt (TDEPFILES): Remove solib-legacy.o.
        * config/arm/linux.mt (TDEPFILES): Likewise.
        * config/i386/i386gnu.mh (NATDEPFILES): Likewise.
        * config/ia64/linux.mt (TDEPFILES): Likewise.
        * config/m32r/linux.mt (TDEPFILES): Likewise.
        * config/powerpc/linux.mt (TDEPFILES): Likewise.
        * config/s390/s390.mt (TDEPFILES): Likewise.

        * alpha-linux-tdep.c (alpha_linux_init_abi): Call
        set_solib_svr4_fetch_link_map_offsets.
        * i386gnu-tdep.c (i386gnu_init_abi): Likewise.
        * ia64-linux-tdep.c (ia64_linux_init_abi): Likewise.

        * i386gnu-tdep.c: Include "solib-svr4.h".
        * Makefile.in: Update dependencies.

2007-10-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * i386-nto-tdep.c: Include "solib.h".
        (i386nto_init_abi): Use set_solib_ops instead of overwriting
        current_target_so_ops members.
        * solist.h (TARGET_SO_RELOCATE_SECTION_ADDRESSES): Remove.
        (TARGET_SO_FIND_AND_OPEN_SOLIB): Remove.
        (TARGET_SO_IN_DYNSYM_RESOLVE_CODE): Remove.
        * Makefile.in: Update dependencies.

2007-10-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * arm-wince-tdep.c: Include "solib.h" and "solib-target.h".
        (arm_wince_init_abi): Call set_solib_ops.
        * i386-cygwin-tdep.c: Include "solib.h" and "solib-target.h".
        (i386_cygwin_init_abi): Call set_solib_ops.
        * solib-target.c: Include "solib-target.h".
        (solib_target_so_ops): Make global.
        (_initialize_solib_target): Do not set current_target_so_ops.
        * solib-target.h: New file.
        * Makefile.in: Update dependencies.

2007-10-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * mips-irix-tdep.c: Include "gdb_string.h", "solib.h", "solib-irix.h".
        (mips_irix_init_abi): Call set_solib_ops.
        * solib-irix.c: Include "solib.h" and "solib-irix.h".
        (irix_so_ops): Make global.
        (_initialize_irix_solib): Do not set current_target_so_ops.
        * solib-irix.h: New file.
        * Makefile.in: Update dependencies.

2007-10-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * configure.tgt: Remove hppa*64*-*-hpux11* special case.
        * config/pa/hppa64.mt: Delete file.
        * config/pa/hppahpux.mt (MT_CFLAGS): Remove.
        (TDEPFILES): Move somread.o to ...
        * config/pa/hpux.mh (NATDEPFILES): ... here.

        * configure.ac: Add check for elf_hp.h header.
        Search libdl and libxpdl for dlgetmodinfo.
        * config.in, configure: Regenerate.
        * solib-pa64.c: Conditionalize compilation on #ifdef HAVE_ELF_HP_H
        instead of #ifndef PA_SOM_ONLY.  Include "solib.h".
        (pa64_solib_select): Take gdbarch instead of tdep argument.  Call
        set_solib_ops instead of modifying current_target_so_ops.
        * solib-pa64.h (pa64_solib_select): Update prototype.
        * solib-som.c: Remove include of "som.h".  Include "solib.h".
        (som_solib_select): Take gdbarch instead of tdep argument.  Call
        set_solib_ops instead of modifying current_target_so_ops.
        * solib-som.h (som_solib_select): Update prototype.
        * hppa-hpux-tdep.c (hppa_hpux_som_init_abi): Pass gdbarch instead
        of tdep to som_solib_select call.
        (hppa_hpux_elf_init_abi): Pass gdbarch instead of tdep to
        pa64_solib_select call.
        * Makefile.in: Update dependencies.

2007-10-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * frv-tdep.c: Include "solib.h".
        (frv_gdbarch_init): Call set_solib_ops.
        * frv-tdep.h (struct target_so_ops): Add forward reference.
        (frv_so_ops): Add extern declaration.
        * solib-frv.c (frv_so_ops): Make global.
        (_initialize_frv_solib): Do not set current_target_so_ops.
        * Makefile.in: Update dependencies.

2007-10-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * solib.c (solib_global_lookup): Use solib_ops instead of global
        current_target_so_ops.

2007-10-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/frv/frv.mt (DEPRECATED_TM_FILE): Remove.
        * config/frv-tm-frv.h: Delete file.

2007-10-24  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Mention gdbserver support for non-libthread_db operation.

2007-10-24  Daniel Jacobowitz  <dan@codesourcery.com>

        * amd64-tdep.c (amd64_convert_register_p): Delete.
        (amd64_init_abi): Use i387_convert_register_p.
        * alpha-tdep.c (alpha_convert_register_p): Return zero for
        eight byte types.
        (alpha_register_to_value, alpha_value_to_register): Do not handle
        eight byte types.
        * i386-tdep.c (i386_convert_register_p): Use i387_convert_register_p.
        * i387-tdep.c (i387_convert_register_p): New.
        (i387_register_to_value, i387_value_to_register): Update comments.
        * i387-tdep.h (i387_convert_register_p): Declare.
        * ia64-tdep.c (ia64_convert_register_p): Return zero for
        builtin_type_ia64_ext.
        (ia64_gdbarch_init): Do not initialize builtin_type_ia64_ext here.
        (_initialize_ia64_tdep): Initialize builtin_type_ia64_ext here.
        * m68k-tdep.c (m68k_convert_register_p): Return zero for
        builtin_type_m68881_ext.
        (m68k_register_to_value, m68k_value_to_register): Update comments.

2007-10-24  Nathan Sidwell  <nathan@codesourcery.com>

        * target-memory.c (claim_memory): Propagate baton for split memory
        requests.

2007-10-24  Pedro Alves  <pedro_alves@portugalmail.pt>

        PR gdb/2341
        * sol-thread.c (sol_thread_fetch_registers): Work around gcc 3.4
        alias warning bug.

2007-10-24  Carlos Eduardo Seo  <cseo@linux.vnet.ibm.com>

        * symtab.c (find_line_symtab): scan through psymtabs
        when exact_match is zero.

2007-10-23  Atsushi Nemoto  <anemo@mba.ocn.ne.jp>

        * mips-tdep.c (LL_OPCODE, LLD_OPCODE, SC_OPCODE, SCD_OPCODE): Define.
        (deal_with_atomic_sequence): New.
        (mips_software_single_step): Use it.

2007-10-23  Daniel Jacobowitz  <dan@codesourcery.com>

        PR gdb/2336
        * configure.ac: Modify $LIBINTL before the BFD check.
        * configure: Regenerated.

2007-10-23  Joel Brobecker  <brobecker@adacore.com>

        * buildsym.c (free_pending_blocks): Remove commented-out code.
        (make_blockvector): Likewise. Re-use free_pending_blocks.
        (end_symtab): Remove commented-out code.

2007-10-22  Daniel Jacobowitz  <dan@codesourcery.com>

        * top.c (command_loop): Fix output for shrinkage.

2007-10-22  Daniel Jacobowitz  <dan@codesourcery.com>

        * cp-name-parser.y (exp1): Add & ( var ) as a reference expression.
        (exp): Remove and document function-like casts.

2007-10-22  Daniel Jacobowitz  <dan@codesourcery.com>

        * cp-support.c: Include "safe-ctype.h".
        (cp_already_canonical): New function.
        (cp_canonicalize_string): Use it.  Return NULL for already canonical
        strings.
        (mangled_name_to_comp): Update call to cp_demangled_name_to_comp.
        (cp_func_name, remove_params): Likewise.
        (cp_find_first_component_aux): Use ISSPACE.
        * cp-support.h (cp_demangled_name_to_comp): Correct comment.  Remove
        MEMORY_P argument.
        * cp-name-parser.y (ALLOC_CHUNK): Define.
        (struct demangle_info): Add PREV and NEXT.  Increase the size of
        COMPS.
        (d_grab): Convert to a function.
        (allocate_info): Rewrite.
        (cp_demangled_name_to_comp): Remove MEMORY argument.  Do not use
        strlen.  Update call to allocate_info.  Do not free it on failure.
        (main): Update calls to cp_demangled_name_to_comp.
        * Makefile.in (cp-support.o): Update.

2007-10-22  Markus Deuling  <deuling@de.ibm.com>

        * std-regs.c (value_of_builtin_frame_fp_reg)
        value_of_builtin_frame_pc_reg, value_of_builtin_frame_sp_reg)
        value_of_builtin_frame_ps_reg): Use get_frame_arch to get at the
        current architecture by frame_info.

2007-10-22  Markus Deuling  <deuling@de.ibm.com>

        * reggroups.c (default_register_reggroup_p): Replace current_gdbarch
        by gdbarch.

2007-10-22  Markus Deuling  <deuling@de.ibm.com>

        * infcmd.c (default_print_registers_info, print_return_value)
        (print_vector_info, print_float_info): Replace current_gdbarch by
        gdbarch.
        (registers_info): Use get_frame_arch to get at the current 
        architecture by frame_info.

2007-10-22  Markus Deuling  <deuling@de.ibm.com>

        * i387-tdep.c (i387_collect_fsave, i387_collect_fxsave): Use
        get_regcache_arch to get at the current architecture by regcache.

2007-10-22  Markus Deuling  <deuling@de.ibm.com>

        * target.c (debug_print_register): Use get_regcache_arch to get at the
        current architecture by regcache. 

2007-10-21  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2read.c (read_file_scope): Add a comment.
        (dwarf2_add_field, dwarf2_add_member_fn, read_structure_type)
        (read_enumeration_type, process_enumeration_scope, read_array_type)
        (read_typedef, read_base_type, read_subrange_type)
        (read_unspecified_type): Use dwarf2_name.

2007-10-21  Daniel Jacobowitz  <dan@codesourcery.com>

        * coffread.c (coff_symfile_finish): Call dwarf2_free_objfile.
        * dwarf2read.c (dwarf2_free_objfile): New.
        * elfread.c (elf_symfile_finish): Call dwarf2_free_objfile.
        * symfile.h (dwarf2_free_objfile): Declare.

2007-10-21  Joel Brobecker  <brobecker@adacore.com>

        * hppa-hpux-nat.c (hppa_hpux_store_register): Add missing semi-colon.

2007-10-21  Luis Machado  <luisgpm@br.ibm.com>

        * rs6000-tdep.c (ppc_dwarf2_frame_init_reg): New function.
        * (rs6000_gdbarch_init): Install ppc_dwarf2_frame_init_reg as
        default dwarf2_frame_set_init_reg function.
                
2007-10-21  Pedro Alves  <pedro_alves@portugalmail.pt>

        * NEWS: Mention native MinGW configuration.

2007-10-19  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh: Remove "macro" column of input table.  Remove handling
        of "macro" column throughout the file.  Remove (empty) "macro" entry
        of all gdbarch functions.

2007-10-19  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (sofun_address_maybe_missing): New gdbarch variable.
        * gdbarch.c, gdbarch.h: Regenerate.
        * dbxread.c (find_stab_function_addr): Define unconditionally.
        (read_dbx_symtab): Use gdbarch_sofun_address_maybe_missing
        instead of SOFUN_ADDRESS_MAYBE_MISSING.
        (end_psymtab): Likewise.
        (process_one_symbol): Likewise.
        * mdebugread.c (parse_partial_symbols): Likewise.

        * symtab.h (struct minimal_symbol): Always define "filename" member.
        * elfread.c (elf_symtab_read): Use msym->filename unconditionally.
        * minsyms.c (lookup_minimal_symbol): Likewise.
        * symmisc.c (dump_msymbols): Likewise.

        * config/i386/i386sol2.mt (DEPRECATED_TM_FILE): Remove.
        * config/i386/linux.mt (DEPRECATED_TM_FILE): Remove.
        * config/i386/tm-i386sol2.h: Remove file.
        * config/i386/tm-linux.h: Remove file.
        * i386-linux-tdep.c (i386_linux_init_abi): Add call to
        set_gdbarch_sofun_address_maybe_missing.
        * i386-sol2-tdep.c (i386_sol2_init_abi): Likewise.

        * config/powerpc/linux.mt (DEPRECATED_TM_FILE): Remove.
        * config/powerpc/nbsd.mt (DEPRECATED_TM_FILE): Remove.
        * config/powerpc/obsd.mt (DEPRECATED_TM_FILE): Remove.
        * config/powerpc/ppc-eabi.mt (DEPRECATED_TM_FILE): Remove.
        * config/powerpc/ppc-sim.mt (DEPRECATED_TM_FILE): Remove.
        * config/powerpc/tm-ppc-eabi.h: Remove file.
        * rs6000-tdep.c (rs6000_gdbarch_init): Add call to
        set_gdbarch_sofun_address_maybe_missing.

        * config/sparc/sol2-64.mt (DEPRECATED_TM_FILE): Remove.
        * config/sparc/sol2.mt (DEPRECATED_TM_FILE): Remove.
        * config/sparc/tm-sol2.h: Remove file.
        * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Add call to
        set_gdbarch_sofun_address_maybe_missing.
        * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Likewise.

2007-10-19  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (static_transform_name): New gdbarch callback.
        * gdbarch.c, gdbarch.h: Regenerate.
        * dbxread.c (read_dbx_symtab): Use gdbarch_static_transform_name
        instead of STATIC_TRANSFORM_NAME.
        * mdebugread.c (parse_partial_symbols): Likewise.
        * stabsread.c (define_symbol): Likewise.
        * xcoffread.c (scan_xcoff_symtab): Likewise.

        * config/i368/tm-i386sol2.h (STATIC_TRANSFORM_NAME): Remove.
        (IS_STATIC_TRANSFORM_NAME): Remove.
        * i386-tdep.c (sunpro_static_transform_name): Remove, move to ...
        * i386-sol2-tdep.c (i386_sol2_static_transform_name): ... here.
        (i386_sol2_init_abi): Install it.

        * config/sparc/tm-sol2.h (STATIC_TRANSFORM_NAME): Remove.
        (IS_STATIC_TRANSFORM_NAME): Remove.
        * sparc-tdep.c (sparc_stabs_unglobalize_name): Remove, move to ...
        * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): ... here.
        (sparc32_sol2_init_abi): Install it.
        * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Likewise.
        * sparc-tdep.h (sparc_sol2_static_transform_name): Add prototype.

2007-10-18  Daniel Jacobowitz  <dan@codesourcery.com>

        * mips-tdep.c (mips_xfer_register): Take a gdbarch argument.
        (mips_n32n64_return_value, mips_o32_return_value)
        (mips_o64_return_value): Update calls to mips_xfer_register.

2007-10-17  Daniel Jacobowitz  <dan@codesourcery.com>

        * frame.c (frame_unwind_unsigned_register): Delete.
        (frame_sp_unwind): Use frame_unwind_register_unsigned instead.
        * frame.h (frame_unwind_unsigned_register): Delete prototype.

        * alpha-linux-tdep.c, alpha-mdebug-tdep.c, alpha-tdep.c,
        avr-tdep.c, cris-tdep.c, frv-tdep.c, m68hc11-tdep.c, mn10300-tdep.c,
        mt-tdep.c: Replace frame_unwind_unsigned_register with
        frame_unwind_register_unsigned.

2007-10-16  Pedro Alves  <pedro_alves@portugalmail.pt>

        * config/i386/mingw.mh, config/i386/mingw.mt: New files.
        * configure.tgt (i[34567]86-*-mingw32*): Set gdb_target = mingw.
        * win32-nat.c: Only include cygwin.h on Cygwin host.  Don't
        include procfs.h.
        (cygwin_load_start, cygwin_load_end, cygwin_exceptions): Disable
        if not building on Cygwin.
        (win32_make_so, handle_output_debug_string, handle_exception)
        (do_initial_win32_stuff): Wrap Cygwin specific code in __CYGWIN__.
        (win32_attach): Only fallback to Cygwin pids if building on
        Cygwin.
        (win32_pid_to_exec_file): Disable Cygwin specific code, if not
        building on Cygwin.
        (win32_create_inferior): Disable starting the inferior through a
        shell, environment var processing and tty handling if not building
        on Cygwin.
        (cygwin_pid_to_str): Rename to ...
        (win32_pid_to_str): ... this.
        (init_win32_ops): Update use of win32_pid_to_str.  Disable "shell"
        and "cygwin-exceptions" commands if not building on Cygwin.

2007-10-16  Gaius Mulley  <gaius@glam.ac.uk>

        * doc/gdb.texinfo:  Add TSIZE definition, removed
        statement about unbounded arrays being unimplemented.
        * m2-valprint.c (m2_print_array_contents):  New function.
        (m2_print_unbounded_array):  New function.
        (m2_print_array_contents):  New function.
        * m2-typeprint.c (m2_unbounded_array):  New function.
        (m2_is_unbounded_array):  New function.
        (m2_print_type):  Test for unbounded array when walking
        across structs.
        * m2-lang.h:  Added extern m2_is_unbounded_array.
        * m2-lang.c (evaluate_subexp_modula2):  New function.
        (exp_descriptor_modula2):  New structure.
        (m2_language_defn):  Use exp_descriptor_modula2.
        * m2-exp.y:  Added TSIZE and binary subscript.

2007-10-16  Daniel Jacobowitz  <dan@codesourcery.com>

        * mi/mi-main.c (captured_mi_execute_command): Clear mi_error_message
        after freeing it.

2007-10-16  Kevin Buettner  <kevinb@redhat.com>

        * m32r-tdep.c (decode_prologue): Sign extend offset for
        "addi sp, xx" case.
        (m32r_frame_unwind_cache): Likewise.

2007-10-15  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * rs6000-tdep.c (skip_prologue): Restore comment with
        function description to its proper place.

2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Mention gdbserver PowerPC improvements.

2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * features/Makefile (WHICH): Add PowerPC register definitions.
        (rs6000/powerpc-32-expedite, rs6000/powerpc-e500-expedite)
        (rs6000/powerpc-64-expedite): New macros.
        ($(outdir)/%.dat): Handle subdirectories.
        * regformats/rs6000/powerpc-32.dat, regformats/rs6000/powerpc-64.dat,
        regformats/rs6000/powerpc-e500.dat: New generated files.

2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * ppc-linux-nat.c (ppc_linux_read_description): New.
        (_initialize_ppc_linux_nat): Set to_read_description.
        * ppc-tdep.h (tdesc_powerpc_e500): Declare.

2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Document target described register support for PowerPC.
        * ppc-tdep.h: Remove ppc_spr constants.
        (struct gdbarch_tdep): Remove regs, ppc_sr0_regnum, and
        ppc_builtin_type_vec128 members.
        (PPC_R0_REGNUM, PPC_F0_REGNUM, PPC_PC_REGNUM, PPC_MSR_REGNUM)
        (PPC_CR_REGNUM, PPC_LR_REGNUM, PPC_CTR_REGNUM, PPC_XER_REGNUM)
        (PPC_FPSCR_REGNUM, PPC_MQ_REGNUM, PPC_SPE_UPPER_GP0_REGNUM)
        (PPC_SPE_ACC_REGNUM, PPC_SPE_FSCR_REGNUM, PPC_VR0_REGNUM)
        (PPC_VSCR_REGNUM, PPC_VRSAVE_REGNUM, PPC_NUM_REGS): New constants.
        * rs6000-tdep.c: Include preparsed descriptions.
        (init_sim_regno_table): Do not iterate over pseudo registers.
        Look up segment registers by name.  Use sim_spr_register_name
        for SPRs.
        (rs6000_register_sim_regno): Call init_sim_regno_table here.
        (rs6000_builtin_type_vec128): Delete.
        (rs6000_register_name): Only handle SPE pseudo registers and upper
        halves.  Call tdesc_register_name for everything else.
        (rs6000_register_type): Delete.  Replace with...
        (rs6000_pseudo_register_type): ...this new function.  Only handle
        SPE pseudo registers.
        (rs6000_register_reggroup_p): Delete.  Replace with...
        (rs6000_pseudo_register_reggroup_p): ...this new function.  Only
        handle SPE pseudo registers.
        (rs6000_convert_register_p): Use ppc_fp0_regnum instead of
        "struct reg".
        (rs6000_register_to_value, rs6000_value_to_register): Remove check
        of reg->fpr.
        (e500_register_reggroup_p): Delete.
        (STR, R, R4, R8, R16, F, P8, R32, R64, R0, A4, S, S4, SN4, S64)
        (COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_UISA_NOFP_SPRS)
        (PPC_SEGMENT_REGS, PPC_OEA_SPRS, PPC_ALTIVEC_REGS, PPC_SPE_GP_REGS)
        (PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): Delete macros.
        (registers_powerpc, registers_403, registers_403GC, registers_505)
        (registers_860, registers_601, registers_602, registers_603)
        (registers_604, registers_750, registers_7400, registers_e500): Delete
        variables.
        (struct variant): Delete nregs, npregs, num_tot_regs, and regs.  Add
        tdesc.
        (tot_num_registers, num_registers, num_pseudo_registers): Delete.
        (variants): Delete outdated comment.  Use standard target descriptions
        instead of "struct reg" arrays.
        (init_variants): Delete.
        (rs6000_gdbarch_init): Do not guess word size from the BFD
        architecture if we have a target description.  Select a variant
        before creating a new architecture.  Use the variant's target
        description if the target did not define a register layout.
        Validate target-supplied registers.  Reject mismatches.  Use
        fixed register numbers and new constants instead of magic
        numbers.  Call set_gdbarch_ps_regnum.  Call tdesc_use_registers.
        (_initialize_rs6000_tdep): Initialize the preparsed target
        descriptions.
        * target-descriptions.c (tdesc_predefined_types): Add int128 and
        uint128.
        (tdesc_find_register_early): New function.
        (tdesc_numbered_register): Use it.
        (tdesc_register_size): New function.
        (tdesc_use_registers): Take a target_desc argument.  Do not use
        gdbarch_target_desc.
        * target-descriptions.h (tdesc_use_registers): Update prototype
        and comment.
        (tdesc_register_size): New prototype.
        * Makefile.in (powerpc_32_c, powerpc_403_c, powerpc_403gc_c)
        (powerpc_505_c, powerpc_601_c, powerpc_602_c, powerpc_603_c)
        (powerpc_604_c, powerpc_64_c, powerpc_7400_c, powerpc_750_c)
        (powerpc_860_c, powerpc_e500_c, rs6000_c): New macros.
        (rs6000-tdep.o): Update.
        * arm-tdep.c (arm_gdbarch_init): Update call to tdesc_use_registers.
        * m68k-tdep.c (m68k_gdbarch_init): Likewise.
        * mips-tdep.c (mips_gdbarch_init): Likewise.

2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
        features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
        features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
        features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
        features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
        features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
        features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: New
        generated files.

2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * features/rs6000/power-altivec.xml, features/rs6000/power-core.xml,
        features/rs6000/power-fpu.xml, features/rs6000/power-oea.xml,
        features/rs6000/power-spe.xml, features/rs6000/power64-core.xml: New
        feature descriptions for standard PowerPC register sets.

        * features/rs6000/powerpc-32.xml, features/rs6000/powerpc-403.xml,
        features/rs6000/powerpc-403gc.xml, features/rs6000/powerpc-505.xml,
        features/rs6000/powerpc-601.xml, features/rs6000/powerpc-602.xml,
        features/rs6000/powerpc-603.xml, features/rs6000/powerpc-604.xml,
        features/rs6000/powerpc-64.xml, features/rs6000/powerpc-7400.xml,
        features/rs6000/powerpc-750.xml, features/rs6000/powerpc-860.xml,
        features/rs6000/powerpc-e500.xml, features/rs6000/rs6000.xml: New
        target descriptions for PowerPC processors.

2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * target-descriptions.c (tdesc_predefined_types): New.
        (tdesc_named_type): Use it.
        (tdesc_type_id, maint_print_c_tdesc_cmd): New functions.
        (_intialize_target_descriptions): Register "maint print c-tdesc".
        * features/Makefile (XMLTOC, CFILES, GDB): New macros.
        (cfiles, %.c): New rules.
        * features/arm-with-iwmmxt.c, features/mips-linux.c,
        features/mips64-linux.c: New generated files.

        * arm-linux-nat.c: Include preparsed description instead of
        "xml-support.h".
        (super_xfer_partial, arm_linux_xfer_partial): Remove.
        (arm_linux_read_description): New function.
        (_initialize_arm_linux_nat): Set to_read_description instead of
        to_xfer_partial.  Initialize preparsed description.
        * config/arm/linux.mh (TDEP_XML): Delete.
        * mips-linux-nat.c: Include preparsed descriptions instead of
        "xml-support.h".
        (super_xfer_partial, mips_linux_xfer_partial): Remove.
        (mips_linux_read_description): New function.
        (_initialize_mips_linux_nat): Set to_read_description instead of
        to_xfer_partial.  Initialize preparsed description.
        * config/mips/linux.mh (TDEP_XML): Delete.
        * Makefile.in (XMLFILES): Remove $(TDEP_XML).
        (features_headers, arm_with_iwmmxt_c, mips_linux_c)
        (mips64_linux_c): New macros.
        (arm-linux-nat.o, mips-linux-nat.o): Update.

2007-10-15  Pierre Muller  <muller@ics.u-strasbg.fr>

        * cp-abi.c (set_cp_abi_as_auto_default): ARI fix:
        Replace xasprintf by xstrprintf.
        symfile-mem.c (add_vsyscall_page): Ditto.

2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * ia64-linux-nat.c (ia64_register_addr): Add gdbarch parameter,
        replacing use of global current_gdbarch.
        (ia64_cannot_fetch_register, ia64_cannot_store_register): Likewise.
        (ia64_linux_fetch_register, ia64_linux_store_register): Update callers.

        * ia64-tdep.c (SIGCONTEXT_REGISTER_ADDRESS): Remove macro.
        (ia64_sigtramp_frame_init_saved_regs): Add next_frame parameter,
        replace uses of SIGCONTEXT_REGISTER_ADDRESS.
        (ia64_sigtramp_frame_cache): Update caller.

2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (deprecated_use_struct_convention): Remove.
        (extract_return_value, store_return_value): Remove.
        (return_value): Remove default implementation.
        * gdbarch.c, gdbarch.h: Regenerate.

        * stack.c (return_command): Remove compatibility hack.
        * arch-utils.c (legacy_return_value): Remove.
        * arch-utils.h (legacy_return_value): Likewise.

        * arch-utils.c (always_use_struct_convention): Remove.
        * arch-utils.h (always_use_struct_convention): Likewise.
        * value.c (generic_use_struct_convention): Remove.
        * defs.h (generic_use_struct_convention): Likewise.

2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * avr-tdep.c (avr_return_value): New function.
        (avr_gdbarch_init): Call set_gdbarch_return_value instead of
        set_gdbarch_extract_return_value.

        * fvr-tdep.c (frv_return_value): New function.
        (frv_gdbarch_init): Call set_gdbarch_return_value instead of
        set_gdbarch_extract_return_value, set_gdbarch_store_return_value,
        and set_gdbarch_deprecated_use_struct_convention.

        * ia64-tdep.c (ia64_use_struct_convention): Make static.
        Add check for structure, union, or array types.
        (ia64_extract_return_value): Make static.
        (ia64_store_return_value): Make static.  Support multi-word values.
        (ia64_return_value): New function.
        (ia64_gdbarch_init): Call set_gdbarch_return_value instead of
        set_gdbarch_extract_return_value, set_gdbarch_store_return_value,
        and set_gdbarch_deprecated_use_struct_convention.

2007-10-12  Joel Brobecker  <brobecker@adacore.com>

        * solib-target.c (solib_target_parse_libraries)
        [HAVEHAVE_LIBEXPAT not defined]: Fix thinko in return type.

2007-10-12  Jim Blandy  <jimb@codesourcery.com>

        * serial.h (struct serial_ops): Document read_prim to return zero
        at EOF.
        * ser-base.c (do_ser_base_readchar): Return SERIAL_EOF when
        read_prim returns zero, not SERIAL_TIMEOUT.

2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * alpha-mdebug-tdep.c: Include "gdb_string.h".
        (find_proc_desc): Add fix-up code for setjmp procedure descriptor.
        * mdebugread.c (parse_procedure): Remove setjmp fix-up code.
        * Makefile.in (alpha-mdebug-tdep.o): Update dependencies.

        * config/alpha/alpha.mt (DEPRECATED_TM_FILE): Remove.
        * config/alpha/alpha-linux.mt (DEPRECATED_TM_FILE): Remove.
        * config/alpha/alpha-osf1.mt (DEPRECATED_TM_FILE): Remove.
        * config/alpha/fbsd.mt (DEPRECATED_TM_FILE): Remove.
        * config/alpha/tm-alpha.h: Remove file.

2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * breakpoint.c (breakpoint_sals_to_pc): Do not check for
        DEPRECATED_PC_REQUIRES_RUN_BEFORE_USE.

        * config/pa/tm-hppa.h: Delete file.
        * config/pa/hppa64.mt: Do not set DEPRECATED_TM_FILE.
        * config/pa/hppahpux.mt: Likewise.
        * config/pa/hppa.mt: Likewise.
        * config/pa/linux.mt: Likewise.
        * hppa-tdep.c (hppa_pc_requires_run_before_use): Delete.

2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/arm/nm-nbsdaout.h: Remove file.
        * config/nm-nbsdaout.h: Likewise.
        * config/nm-nbsd.h: Likewise.

2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * block.h (struct block): Remove "gcc_compile_flag" member.
        (BLOCK_GCC_COMPILED): Remove.
        * block.c (allocate_block): Do not clear BLOCK_GCC_COMPILED.
        * buildsym.c (finish_block): Do not set it.
        * symmisc.c (dump_symtab_1): Do not dump it.

        * value.h (using_struct_return): Remove "gcc_p" argument.
        * value.c (using_struct_return): Likewise.
        * eval.c (evaluate_subexp_standard): Adapt callers.
        * infcall.c (call_function_by_hand): Likewise.
        * stack.c (return_command): Likewise.
        * sparc-tdep.c (sparc32_push_dummy_code): Likewise.

        * gdbarch.sh (push_dummy_code): Remove "using_gcc" parameter.
        * gdbarch.c, gdbarch.h: Regenerate.
        * cris-tdep.c (cris_push_dummy_code): Adapt prototype.
        * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
        * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
        * infcall.c (generic_push_dummy_code, push_dummy_code): Likewise.
        (push_dummy_code, call_function_by_hand): Adapt callers.

2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * infcmd.c (print_return_value): Remove STRUCT_RETURN argument.
        (finish_command_continuation, finish_command): Adapt callers.

2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * infcall.c (call_function_by_hand): Remove special handling
        for HP aCC compiled code.

2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * cris-tdep.c (cris_push_dummy_call): Support arguments passed by
        reference.  Fix endianness bugs.
        (cris_reg_struct_has_address): Remove.
        (cris_gdbarch_init): Remove set_gdbarch_deprecated_reg_struct_has_addr
        and set_gdbarch_deprecated_use_struct_convention calls.

        * gdbarch.sh (deprecated_reg_struct_has_addr): Remove.
        * gdbarch.c, gdbarch.h: Regenerate.
        * infcall.c (call_function_by_hand): Remove handling of
        deprecated_reg_struct_has_addr.

2007-10-11  Daniel Jacobowitz  <dan@codesourcery.com>
            Kazu Hirata  <kazu@codesourcery.com>

        * breakpoint.c (do_enable_breakpoint): Delay enabling until after
        checking watchpoint resources.

2007-10-11  Kazu Hirata  <kazu@codesourcery.com>

        * memattr.c (inaccessible_by_default): Change the initial
        value to 1.

2007-10-11  Daniel Jacobowitz  <dan@codesourcery.com>

        PR gdb/2280
        * coffread.c (read_one_sym): Check for read errors.

2007-10-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * linux-nat.c (lin_lwp_attach_lwp): Use "Linux kernel 2.6.19"
        instead of "Linux 2.6.19" in comment.
        (linux_xfer_partial): Use "GNU/Linux target" instead of 
        "Linux target" in comment.
        * m68klinux-tdep.c (m68k_linux_inferior_created): Likewise.
        (m68k_linux_get_sigtramp_info): Likewise.

2007-10-11  Daniel Jacobowitz  <dan@codesourcery.com>

        * MAINTAINERS (language support): List Joel and Paul as
        Ada maintainers.

2007-10-11  Daniel Jacobowitz  <dan@codesourcery.com>

        * dbxread.c (process_one_symbol): Remove VARIABLES_INSIDE_BLOCK
        checks.
        * config/arm/embed.mt, config/arm/linux.mt, config/arm/wince.mt: Do
        not set DEPRECATED_TM_FILE.
        * config/arm/tm-arm.h: Delete file.

2007-10-11  Luis Machado  <luisgpm@br.ibm.com>

        * MAINTAINERS (Write After Approval): Add self.

2007-10-11  Daniel Jacobowitz  <dan@codesourcery.com>

        * buildsym.c (record_line): Remove empty lines followed by
        end-of-sequence markers.

2007-10-11  Kazu Hirata  <kazu@codesourcery.com>

        * configure.tgt: Recognize fido-*-elf.

2007-10-10  Joel Brobecker  <brobecker@adacore.com>

        GDB 6.7 released.

2007-10-10  Markus Deuling  <deuling@de.ibm.com>

        * stack.c (print_frame_args, frame_info, return_command): Use
        get_regcache_arch or get_frame_arch to get at the current architecture
        by regcache or by frame, respectively.

2007-10-10  Markus Deuling  <deuling@de.ibm.com>

        * rs6000-nat.c (fetch_register, store_register)
        (rs6000_fetch_inferior_registers, rs6000_store_inferior_registers): Use
        get_regcache_arch to get at the current architecture by regcache.

        * rs6000-tdep.c (rs6000_push_dummy_call, rs6000_return_value)
        (rs6000_register_reggroup_p, e500_move_ev_registe, rs6000_unwind_pc)
        (rs6000_unwind_dummy_id, rs6000_frame_cache, rs6000_dump_tdep): Replace
        current_gdbarch by gdbarch.
        (rs6000_skip_trampoline_code, rs6000_register_to_value)
        (rs6000_value_to_register): Use get_frame_arch to get at the current
        architecture by frame_info.

2007-10-10  Markus Deuling  <deuling@de.ibm.com>

        * sparc-tdep.c (sparc_supply_rwindow, sparc_collect_rwindow): Use
        get_regcache_arch to get at the current architecture by regcache.

        * sparc64-tdep.c (sparc64_supply_gregset, sparc64_collect_gregset)
        (sparc64_supply_fpregset, sparc64_collect_fpregset): Use
        get_regcache_arch to get at the current architecture by regcache.

        * sparc64nbsd-nat. (sparc64nbsd_supply_gregset)
        (sparc64nbsd_collect_gregset, sparc64nbsd_supply_fpregset)
        (sparc64nbsd_collect_fpregset): Use get_regcache_arch to get at the
        current architecture by regcache.

2007-10-10  Markus Deuling  <deuling@de.ibm.com>

        * remote-mips.c (mips_wait, mips_fetch_registers)
        (mips_store_registers): Use get_regcache_arch to get at the
        current architecture by regcache.

        * mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_fill_reg)
        (mipsnbsd_supply_fpreg, mipsnbsd_fill_fpreg): Use get_regcache_arch to
        get at the current architecture by regcache.
        (mipsnbsd_sigtramp_offset): Use get_frame_arch to get at the current
        architecture by frame_info.

        * mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
        (mipsnbsd_store_inferior_registers): Use get_regcache_arch to get at
        the current architecture by regcache.

        * mips-linux-tdep.c (mips_linux_get_longjmp_target)
        (mips64_linux_get_longjmp_target, mips_linux_o32_sigframe_init)
        (mips_linux_n32n64_sigframe_init): Use get_frame_arch to get at the
        current architecture by frame_info.
        (supply_32bit_reg, mips_supply_gregset, mips_fill_gregset)
        (mips_supply_fpregset, mips_fill_fpregset, supply_64bit_reg)
        (mips64_supply_gregset, mips64_fill_gregset, mips64_supply_fpregset)
        (mips64_fill_fpregset, mips_linux_write_pc): Use get_regcache_arch to
        get at the current architecture by regcache.

        * mips-linux-nat.c (mips_linux_register_addr)
        (mips64_linux_register_addr): Replace current_gdbarch by gdbarch.
        (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset)
        (mips64_linux_regsets_fetch_registers)
        (mips64_linux_regsets_store_registers): Use get_regcache_arch to get at
        the current architecture by regcache.

        * mips64obsd-tdep.c (mips64obsd_sigframe_init): Use get_frame_arch to
        get at the current architecture by frame_info.

2007-10-10  Markus Deuling  <deuling@de.ibm.com>

        * mips-tdep.c (mips_xfer_register): Use get_regcache_arch to get at the
        current architecture by regcache.
        (mips2_fp_compat, mips32_next_pc, mips16_scan_prologue)
        (mips_insn16_frame_cache, mips32_scan_prologue, mips_insn32_frame_cache)
        (mips_stub_frame_cache, mips_read_fp_register_single)
        (mips_read_fp_register_double, mips_print_fp_register)
        (mips_print_register, print_gp_register_row): Use get_frame_arch to get
        at the current architecture by frame_info.
        (mips_register_reggroup_p, mips_pseudo_register_read, mips_unwind_sp)
        (mips_pseudo_register_write, mips_register_type, mips_unwind_pc)
        (mips_unwind_dummy_id, mips_eabi_push_dummy_call)
        (mips_n32n64_push_dummy_call, mips_n32n64_return_value)
        (mips_o32_push_dummy_call, mips_o32_return_value)
        (mips_o64_push_dummy_call, mips_o64_return_value)
        (mips_print_registers_info, mips_dump_tdep): Replace current_gdbarch by
        gdbarch.

2007-10-10  Markus Deuling  <deuling@de.ibm.com>

        * xtensa-tdep.c (xtensa_register_type, xtensa_pseudo_register_read)
        (xtensa_pseudo_register_write, xtensa_register_reggroup_p)
        (xtensa_unwind_pc, xtensa_unwind_dummy_id, xtensa_push_dummy_call)
        (xtensa_dump_tdep): Replace current_gdbarch by gdbarch.
        (xtensa_register_write_masked, xtensa_register_read_masked)
        (xtensa_supply_gregset, xtensa_store_return_value)
        (xtensa_extract_return_value): Use get_regcache_arch to get at the
        current architecture by regcache.
        (xtensa_frame_cache, call0_frame_get_reg_at_entry, call0_frame_cache)
        (xtensa_frame_prev_register): Use get_frame_arch to get at the current
        architecture by frame_info.

2007-10-10  Daniel Jacobowitz  <dan@codesourcery.com>

        * arm-tdep.c (struct arm_prologue_cache): Remove frameoffset.
        (thumb_analyze_prologue): Move pv_area_store_would_trash call
        out of loop.  Do not set cache->frameoffset.
        (arm_scan_prologue): Use prologue-value mechanism.  Do not set
        frameoffset.  Simplify framesize.
        (arm_make_prologue_cache, arm_normal_frame_base): Do not use
        frameoffset.
        * arm-tdep.h (enum gdb_regnum): Add ARM_IP_REGNUM.

2007-10-10  Daniel Jacobowitz  <dan@codesourcery.com>

        * target.c (update_current_target): Call setup_target_debug.
        (push_target): Do not call it here.

2007-10-09  Michael Snyder  <msnyder@specifix.com>

        * MAINTAINERS: Update my email address.

2007-10-09  Markus Deuling  <deuling@de.ibm.com>

        * xtensa-tdep.c: Replace following current-gdbarch based macros by
        their expression:
        (xtensa_pseudo_register_read)
        (xtensa_pseudo_register_write): XTENSA_TARGET_FLAGS.
        (ARG_NOF, ARG_1ST, xtensa_extract_return_value)
        (xtensa_store_return_value, xtensa_push_dummy_call): CALL_ABI.
        (xtensa_pseudo_register_read)
        (xtensa_pseudo_register_write): ISA_USE_WINDOWED_REGISTERS.
        (xtensa_breakpoint_from_pc): ISA_USE_DENSITY_INSTRUCTIONS.
        (xtensa_register_type, xtensa_supply_gregset, xtensa_frame_cache)
        (xtensa_frame_prev_register): NUM_AREGS.
        (xtensa_pseudo_register_read, xtensa_pseudo_register_write,
        (xtensa_supply_gregset, xtensa_frame_cache, xtensa_frame_prev_register,
        (xtensa_extract_return_value, xtensa_store_return_value): WB_REGNUM.
        (xtensa_supply_gregset, xtensa_frame_cache)
        (xtensa_frame_prev_register): WS_REGNUM.
        (xtensa_supply_gregset): LBEG_REGNUM, LEND_REGNUM, LCOUNT_REGNUM,
        SAR_REGNUM, EXCCAUSE_REGNUM, EXCVADDR_REGNUM
        (xtensa_register_name, xtensa_register_type, xtensa_reg_to_regnum)
        (xtensa_pseudo_register_read, xtensa_pseudo_register_write)
        (xtensa_register_reggroup_p): REGMAP.
        (call0_track_op): LITBASE_REGNUM.
        (xtensa_register_type, xtensa_reg_to_regnum, call0_frame_cache):A0_BASE
        (xtensa_supply_gregset, call0_frame_get_reg_at_entry)
        (xtensa_frame_prev_register, AREG_NUMBER)
        (xtensa_register_type): AR_BASE.
        (xtensa_pseudo_register_read, xtensa_pseudo_register_write): FP_ALIAS.
        (AREG_NUMBER): AREGS_MASK, WB_MASK, A0_REGNUM.
        (ARG_1ST, xtensa_pseudo_register_read, xtensa_pseudo_register_write)
        (xtensa_frame_cache, xtensa_frame_prev_register)
        (xtensa_extract_return_value, xtensa_store_return_value)
        (xtensa_push_dummy_call, call0_frame_cache): A0_REGNUM.
        (xtensa_register_type, xtensa_pseudo_register_read, xtensa_frame_cache)
        (xtensa_pseudo_register_write, xtensa_unwind_dummy_id)
        (xtensa_frame_prev_register, xtensa_push_dummy_call)
        (call0_frame_cache): A1_REGNUM.
        (xtensa_extract_return_value, xtensa_store_return_value): A2_REGNUM.
        (xtensa_push_dummy_call): A4_REGNUM.
        (ARGS_FIRST_REG): A6_REGNUM.
        (xtensa_pseudo_register_read, xtensa_pseudo_register_write)
        (xtensa_frame_prev_register): A15_REGNUM.
        * xtensa-tdep.h: Delete current_gdbarch based macros after replacing
        them in the appropriate source file:
        XTENSA_TARGET_FLAGS, SPILL_LOCATION, SPILL_SIZE, CALL_ABI, NUM_AREGS,
        ISA_USE_WINDOWED_REGISTERS, ISA_USE_DENSITY_INSTRUCTIONS, WB_REGNUM,
        ISA_USE_EXCEPTIONS, ISA_USE_EXT_L32R, DEBUG_DATA_VADDR_TRAP_COUNT,
        DEBUG_INST_VADDR_TRAP_COUNT, ISA_MAX_INSN_SIZE, DEBUG_NUM_IBREAKS,
        DEBUG_NUM_DBREAKS, WS_REGNUM, LBEG_REGNUM, LEND_REGNUM, SAR_REGNUM,
        REGMAP, LITBASE_REGNUM, DEBUGCAUSE_REGNUM, EXCCAUSE_REGNUM, AR_BASE,
        EXCVADDR_REGNUM, NUM_IBREAKS, REGMAP_BYTES, NUM_CONTEXTS, FP_ALIAS,
        FP_LAYOUT, FP_LAYOUT_BYTES, GREGMAP, AREGS_MASK, WB_MASK, A0_REGNUM,
        A1_REGNUM, A2_REGNUM, A3_REGNUM, A4_REGNUM, A5_REGNUM, A6_REGNUM,
        A7_REGNUM, A8_REGNUM, A9_REGNUM, A10_REGNUM, A11_REGNUM, A12_REGNUM,
        A13_REGNUM, A14_REGNUM, A15_REGNUM.

2007-10-09  Markus Deuling  <deuling@de.ibm.com>

        * h8300-tdep.c (h8300_frame_cache): Use get_frame_arch to get at
        the current architecture by frame_info.
        (h8300_frame_prev_register
        (h8300_print_register): Replace current_gdbarch by gdbarch.
        (h8300_print_registers_info, h8300_register_type)
        (h8300_register_type): Likewise.

2007-10-09  Markus Deuling  <deuling@de.ibm.com>

        * i386-linux-nat.c (fetch_register): Use get_regcache_arch to get at
        the current architecture by regcache.
        (store_register, supply_gregset, fill_gregset, i386_linux_resume)
        (i386_linux_fetch_inferior_registers)
        (i386_linux_store_inferior_registers): Likewise.
        * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Likewise.
        * i386-nto-tdep.c (i386nto_supply_gregset): Likewise.
        * i386v4-nat.c (supply_fpregset, fill_fpregset): Likewise.
        * i386-tdep.c (i386_unwind_pc): Replace current_gdbarch by gdbarch.
        (i386_extract_return_value, i386_store_return_value): Likewise.
        * i386-tdep.c (i386_frame_prev_register): Use get_frame_arch to get at
        the current architecture by frame_info.
        (i386_sigtramp_frame_cache, i386_get_longjmp_target)
        (i386_register_to_value, i386_value_to_register): Likewise.

2007-10-09  Markus Deuling  <deuling@de.ibm.com>

        * monitor.c (monitor_supply_register): Use get_regcache_arch to get at
        the current architecture by regcache.
        (monitor_store_register, monitor_store_registers): Likewise.

2007-10-09  Markus Deuling  <deuling@de.ibm.com>

        * dbug-rom.c (dbug_supply_register): Use get_regcache_arch to get at
        the current architecture by regcache.

2007-10-09  Markus Deuling  <deuling@de.ibm.com>

        * arch-utils.c (legacy_return_value): Replace current_gdbarch by
        gdbarch.

2007-10-09  Markus Deuling  <deuling@de.ibm.com>

        * frame.c (frame_pc_unwind): Use get_frame_arch to get at the current
        architecture by frame.
        (frame_save_as_regcache, frame_register_unwind, get_prev_frame_1)
        (inside_main_func, frame_sp_unwind): Likewise.

2007-10-09  Daniel Jacobowitz  <dan@codesourcery.com>

        * solib-svr4.c (enable_break): Add the dynamic linker also if
        auxv succeeds.

2007-10-09  Carlos Eduardo Seo  <cseo@linux.vnet.ibm.com>

        * MAINTAINERS (Write After Approval): Add self.

2007-10-09  Pedro Alves  <pedro_alves@portugalmail.pt>

        * stabsread.c (read_huge_number): Initialize local variable to 0.

2007-10-09  Pierre Muller  <muller@ics.u-strasbg.fr>

        * p-lang.h (pascal_main_name): Add declaration.
        * p-lang.c (GPC_P_INITIALIZE, GPC_MAIN_PROGRAM_NAME_1)
        (GPC_MAIN_PROGRAM_NAME_2): New constants.
        (pascal_main_name): New function.
        * symtab.c: Include p-lang.h.
        (find_main_name): Add call to pascal_main_name.
        * Makefile.in (symtab.o): Add dependency on p-lang.h.

2007-10-09  Pedro Alves  <pedro_alves@portugalmail.pt>

        * stabsread.c (read_huge_number): Fix handling of octal
        representation when the bit width is known.
        (read_range_type): Record unsigned integral types with their size,
        when the type size is known.

2007-10-08  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * MAINTAINERS (Write After Approval): Add self.

2007-10-08  Pierre Muller  <muller@ics.u-strasbg.fr>

        * breakpoint.c (print_one_breakpoint_location): ARI fix: 
        Replace asprintf by xstrprintf.

2007-10-08  Pierre Muller  <muller@ics.u-strasbg.fr>

        * linux-fork.c: ARI fix: include "gdb_dirent.h" instead of <dirent.h>.
        Makefile.in (linux-fork.o): Add gdb_dirent.h dependency. 

2007-10-08  Pierre Muller  <muller@ics.u-strasbg.fr>

        * linux-fork.c: Move "gdb_wait.h" include back to the position of
        <sys/wait.h> include before last commit.

2007-10-08  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips32_next_pc): Fix a typo in BGTZL.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * aix-thread.c (supply_gprs64, supply_fprs, supply_sprs64)
        (supply_sprs32, fetch_regs_user_thread, fetch_regs_kernel_thread)
        (fill_gprs64, fill_gprs32, fill_fprs, fill_sprs64, fill_sprs32)
        (store_regs_user_thread, store_regs_kernel_thread): Use
        get_regcache_arch or get_frame_arch to get at the current architecture
        by regcache or by frame, respectively.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * sh64-tdep.c (sh64_push_dummy_call, sh64_register_type)
        (sh64_pseudo_register_read, sh64_pseudo_register_write)
        (sh64_do_fp_register, sh64_do_pseudo_register, sh64_do_register)
        (sh64_print_register, sh64_media_print_registers_info)
        (sh64_compact_print_registers_info, sh64_unwind_sp)
        (sh64_unwind_pc): Replace current_gdbarch by gdbarch.
        (sh64_show_media_regs, sh64_show_compact_regs, sh64_frame_cache)
        (sh64_frame_prev_register): Use FRAME to recognize current
        architecture.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * sh-tdep.c (sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu)
        (sh_sh2a_register_type, sh_sh3e_register_type, sh_sh4_register_type)
        (sh_register_reggroup_p, sh_dwarf2_frame_init_reg): Replace
        current_gdbarch by gdbarch.
        (sh_generic_show_regs, sh3_show_reg, sh2e_show_regs, sh2a_show_regs)
        (sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs)
        (sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs, sh_frame_cache)
        (sh_frame_prev_register, sh_unwind_sp, sh_unwind_pc): Use FRAME to
        recognize current architecture.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * remote.c (init_remote_state, fetch_register_using_p)
        (process_g_packet, remote_fetch_registers, remote_prepare_to_store)
        (store_register_using_P, store_registers_using_G)
        (remote_store_registers): Use get_regcache_arch or get_frame_arch to
        get at the current architecture by regcache or by frame, respectively.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * m68k-tdep.c (m68k_register_to_value, m68k_value_to_register)
        (m68k_svr4_extract_return_value, m68k_svr4_store_return_value)
        (m68k_frame_prev_register, m68k_get_longjmp_target): Use
        get_regcache_arch or get_frame_arch to get at the current architecture
        by regcache or by frame, respectively.
        * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
        * m68klinux-nat.c (fetch_register, old_fetch_inferior_registers)
        (store_register, old_store_inferior_registers, supply_gregset)
        (supply_fpregset, fill_fpregset): Likewise.
        * m68k-tdep.c (m68k_register_type, m68k_unwind_pc, m68k_dump_tdep):
        Replace current_gdbarch by gdbarch.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * irix5-nat.c (supply_gregset, fill_gregset, supply_fpregset)
        (fill_fpregset, fetch_core_registers): Use get_regcache_arch or
        get_frame_arch to get at the current architecture by regcache or by
        frame, respectively.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write):
        Replace current_gdbarch by gdbarch.
        * ia64-tdep.c (ia64_frame_prev_register
        (ia64_sigtramp_frame_prev_register)
        (ia64_libunwind_frame_prev_register): Use get_regcache_arch or
        get_frame_arch to get at the current architecture by regcache or by
        frame, respectively.
        * ia64-linux-nat.c (ia64_linux_fetch_register)
        (ia64_linux_fetch_registers, ia64_linux_store_register)
        (ia64_linux_store_registers): Likewise.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * hppa-tdep.c (hppa_stub_unwind_sniffer, hppa_dump_tdep): Replace
        current_gdbarch by gdbarch.
        * hppa-linux-nat.c (fetch_register, store_register)
        (hppa_linux_fetch_inferior_registers)
        (hppa_linux_store_inferior_registers): Use get_regcache_arch or
        get_frame_arch to get at the current architecture by regcache or by
        frame, respectively.
        * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code
        (hppa_hpux_unwind_adjust_stub): Likewise.
        * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register)
        (hppa_hpux_fetch_inferior_registers)
        (hppa_hpux_store_inferior_registers): Likewise.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache)
        (cris_scan_prologue, crisv32_scan_prologue, find_step_target)
        (cris_software_single_step, cris_supply_gregset): Use get_regcache_arch
        or get_frame_arch to get at the current architecture by regcache or by
        frame, respectively.
        * cris-tdep.c (crisv32_single_step_through_delay, cris_push_dummy_call)
        (cris_unwind_pc, cris_unwind_sp, cris_register_type, cris_dump_tdep)
        (crisv32_register_type, cris_dwarf2_frame_init_reg): Replace
        current_gdbarch by gdbarch.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * arm-tdep.c (arm_scan_prologue, arm_make_prologue_cache)
        (thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value)
        (arm_store_return_value): Use get_regcache_arch or get_frame_arch to
        get at the current architecture by regcache or by·frame, respectively.
        (arm_push_dummy_call, arm_dump_tdep): Replace current_gdbarch by
        gdbarch.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * amd64-tdep.c (amd64_frame_prev_register, amd64_sigtramp_frame_cache):
        Use get_regcache_arch or get_frame_arch to get at the current
        architecture by regcache or by frame, respectively.
        * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Likewise.
        * amd64-nat.c (amd64_supply_native_gregset)
        (amd64_collect_native_gregset): Replace current_gdbarch by gdbarch.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * alpha-tdep.c (alpha_register_reggroup_p): Replace current_gdbarch by
        gdbarch.
        * alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise.
        (alpha_sigtramp_frame_unwind_cache, alpha_sigtramp_frame_this_id)
        (alpha_sigtramp_frame_sniffer, alpha_next_pc): Use get_regcache_arch or
        get_frame_arch to get at the current architecture by regcache or by 
        frame, respectively.
        * alpha-nat.c (fetch_osf_core_registers): Likewise.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * dwarf2-frame.c (read_reg, execute_cfa_program, dwarf2_frame_cache)
        (dwarf2_frame_default_init_reg, dwarf2_frame_prev_register): Replace
        current_gdbarch by gdbarch.
        * dwarf2loc.c (dwarf2_evaluate_loc_desc): Likewise.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * regcache.c (init_regcache_descr, register_type, read_pc_pid)
        (write_pc_pid, regcache_dump): Replace current_gdbarch by gdbarch.
        * regcache.c (regcache_raw_write): Use get_regcache_arch or
        get_frame_arch to get at the current architecture by regcache or by
        frame, respectively.

2007-10-08  Markus Deuling  <deuling@de.ibm.com>

        * findvar.c (value_of_register, locate_var_value): Use
        get_regcache_arch or get_frame_arch to get at the current architecture
        by regcache or by frame, respectively.
        * findvar.c (default_value_from_register, value_from_register): Replace
        current_gdbarch by gdbarch.

2007-10-08  Pierre Muller  <muller@ics.u-strasbg.fr>

        * config/i386/nm-i386.h (CHILD_POST_STARTUP_INFERIOR): ARI fix: Remove.

2007-10-08  Pierre Muller  <muller@ics.u-strasbg.fr>

        * linux-fork.c: ARI fix: include "gdb_wait.h" instead of <sys/wait.h>.
        Makefile.in (linux-fork.o): Add gdb_wait.h dependency. 

2007-10-05  Daniel Jacobowitz  <dan@codesourcery.com>

        * remote.c (get_offsets): Only call free_symfile_segment_data if
        data was allocated.

2007-10-03  Pierre Muller  <muller@ics.u-strasbg.fr>

        * objc-exp.y: ARI fix: remove 4 PARAMS. 

2007-10-03  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Use uniform spacing.  Correct version number for GDB 6.7
        news.  Mention XML support for M68K in GDB 6.7.

2007-10-03  Daniel Jacobowitz  <dan@codesourcery.com>

        * gdbtypes.c (create_range_type): Do not set TYPE_FIELD_TYPE for the
        bounds.
        (init_vector_type): Use builtin_type_int32.

2007-10-02  Ulrich Weigand  <uweigand@de.ibm.com>

        * s390-tdep.c (s390_regset_from_core_section): Allow excess section
        size to enable bi-arch generate-core-file support.

2007-10-02  Markus Deuling  <deuling@de.ibm.com>

        * spu-tdep.c (info_spu_signal_command): Fix output for SPU signal.

2007-10-02  Carlos Eduardo Seo  <cseo@linux.vnet.ibm.com>

        * tui/tui-interp.c (tui_init): Initialize tui's SIGWINCH
        signal handler.
        * tui/tui-win.c (tui_initialize_win): New function for
        initializing tui's SIGWINCH signal handler.
        * tui/tui-win.h (tui_initialize_win): Declare.

2007-10-02  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-linux-nat.c (ppc_linux_stopped_data_address): Cast
        pointer to uintptr_t before casting to CORE_ADDR.

2007-10-02  Markus Deuling  <deuling@de.ibm.com>

        * linux-nat.c (PTRACE_GETSIGINFO): Add define.

2007-10-02  Mark Mitchell  <mark@codesourcery.com>

        * mingw-hdep.c (gdb_select): Stop helper threads before returning.
        * ser-mingw.c (enum select_thread_state): New type.
        (struct ser_console_state): Add have_started and thread_state.
        (select_thread_wait): New function.
        (thread_fn_type): New type.
        (create_select_thread): New function.
        (destroy_select_thread): Likewise.
        (start_select_thread): Likewise.
        (stop_select_thread): Likewise.
        (console_select_thread): Use new functions.
        (pipe_select_thread): Likewise.
        (file_select_thread): Likewise.
        (ser_console_wait_handle): Likewise.
        (ser_console_done_wait_handle): Likewise.
        (ser_console_close): Likewise.
        (free_pipe_state): Likewise.
        (pipe_wait_handle): Likewise.
        (pipe_done_wait_handle): Likewise.
        (struct net_windows_state): Derive from ser_console_state.
        (net_windows_select_thread): Use new functions.
        (net_windows_wait_handle): Likewise.
        (net_windows_done_wait_handle): Likewise.
        (net_windows_close): Likewise.

2007-10-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * inflow.c (terminal_ours_1): Remove useless line.

2007-10-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * mips-tdep.c (mips_read_fp_register_double): Correct check for
        odd FP registers.
        (mips_print_fp_register): Correct check for even FP registers.
        (mips_virtual_frame_pointer): New function.
        (mips_gdbarch_init): Call set_gdbarch_virtual_frame_pointer.

2007-09-30  Mike Frysinger  <vapier@gentoo.org>

        * value.h (lookup_only_internalvar): New prototype.
        (create_internalvar): Likewise.
        * value.c (lookup_only_internalvar): New function.
        (create_internalvar): Likewise.
        (lookup_internalvar): Use new lookup_only_internalvar and
        create_internalvar functions.
        * parse.c (write_dollar_variable): Look up $ symbols in internal
        table first rather than last.

2007-09-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * linux-nat.c (linux_nat_new_thread): New variable.
        (linux_child_follow_fork): Set inferior_ptid to include LWP ID.  Use
        linux_nat_switch_fork.
        (lwp_list): Make public.
        (add_lwp): Call linux_nat_new_thread.
        (lin_lwp_attach_lwp, linux_nat_attach): Call add_lwp after stopping
        the new thread.
        (resume_callback): Clear lp->siginfo.  Remove unused variable.
        (linux_nat_resume): Assert that the LWP list is already initialized.
        Clear lp->siginfo.
        (save_siginfo): New.
        (stop_wait_callback, linux_nat_wait): Call it.
        (linux_nat_set_new_thread, linux_nat_get_siginfo): New.
        * linux-nat.h (struct lwp_info): Add siginfo.
        (lwp_list, linux_nat_set_new_thread, linux_nat_get_siginfo): Declare.
        (ALL_LWPS): Define.

        * amd64-linux-nat.c (amd64_linux_dr): New.
        (amd64_linux_dr_get): Take a PTID argument.  Correct typo.
        (amd64_linux_dr_set): Take a PTID argument.
        (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use ALL_LWPS.
        (amd64_linux_dr_reset_addr): Use amd64_linux_dr_set_addr.
        (amd64_linux_dr_get_status): Pass inferior_ptid to amd64_linux_dr_get.
        (amd64_linux_new_thread): New.
        (_initialize_amd64_linux_nat): Call linux_nat_set_new_thread.
        * i386-linux-nat.c (i386_linux_dr): New.
        (i386_linux_dr_get, i386_linux_dr_set): Take a PTID argument.
        (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use ALL_LWPS.
        (i386_linux_dr_reset_addr): Use i386_linux_dr_set_addr.
        (i386_linux_dr_get_status): Pass inferior_ptid to i386_linux_dr_get.
        (i386_linux_new_thread): New.
        (i386_linux_resume): Remove unnecessary PID check.
        (_initialize_i386_linux_nat): Call linux_nat_set_new_thread.
        * ia64-linux-nat.c (enable_watchpoints_in_psr): Take PTID argument.
        (fetch_debug_register, fetch_debug_register_pair): Delete.
        (debug_registers): New.
        (ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint): Use
        ALL_LWPS and debug_registers.
        (ia64_linux_new_thread): New.
        (ia64_linux_stopped_data_address): Use linux_nat_get_siginfo.
        (_initialize_ia64_linux_nat): Call linux_nat_set_new_thread.
        * ppc-linux-nat.c (last_stopped_data_address): Delete.
        (saved_dabr_value): New.
        (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
        ALL_LWPS.
        (ppc_linux_new_thread): New.
        (ppc_linux_stopped_data_address): Use linux_nat_get_siginfo.
        (ppc_linux_stopped_by_watchpoint): Call ppc_linux_stopped_data_address.
        (_initialize_ppc_linux_nat): Call linux_nat_set_new_thread.
        * s390-nat.c (s390_stopped_by_watchpoint): Clear the watchpoint status
        after reading it.
        (s390_fix_watch_points): Take a PTID argument.
        (s390_insert_watchpoint, s390_remove_watchpoint): Use ALL_LWPS.
        (_initialize_s390_nat): Call linux_nat_set_new_thread.

2007-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
            Jeff Johnston  <jjohnstn@redhat.com>

        * breakpoint.c (watchpoints_triggered): New.
        (bpstat_stop_status): Remove STOPPED_BY_WATCHPOINT argument.
        Check watchpoint_triggered instead.  Combine handling for software
        and hardware watchpoints.  Do not use target_stopped_data_address
        here.  Always check a watchpoint if its scope breakpoint triggers.
        Do not stop for thread or overlay events.  Improve check for
        triggered watchpoints without a value change.
        (watch_command_1): Insert the scope breakpoint first.  Link the
        scope breakpoint to the watchpoint.
        * breakpoint.h (enum watchpoint_triggered): New.
        (struct breakpoint): Add watchpoint_triggered.
        (bpstat_stop_status): Update prototype.
        (watchpoints_triggered): Declare.
        * infrun.c (enum infwait_status): Add infwait_step_watch_state.
        (stepped_after_stopped_by_watchpoint): Delete.
        (handle_inferior_event): Make stepped_after_stopped_by_watchpoint
        local.  Handle infwait_step_watch_state.  Update calls to
        bpstat_stop_status.  Use watchpoints_triggered to check
        watchpoints.
        * remote.c (stepped_after_stopped_by_watchpoint): Remove extern.
        (remote_stopped_data_address): Do not check it.

2007-09-29  Daniel Jacobowitz  <dan@codesourcery.com>

        * configure.ac: Add $LIBINTL when testing libbfd.
        * configure: Regenerated.

2007-09-28  Vladimir Prus  <vladimir@codesourcery.com>

        * NEW: Mention pending breakpoint changes and
        support for breakpoints at multiple locations.
        
2007-09-27  Daniel Jacobowitz  <dan@codesourcery.com>

        * arm-linux-tdep.c (arm_linux_software_single_step): New.
        (arm_linux_init_abi): Use it.
        * arm-tdep.c (arm_get_next_pc): Make global.  Handle all-ones
        condition correctly.
        * arm-tdep.h (arm_get_next_pc): Declare.
        * Makefile.in (arm-linux-tdep.o): Update.

2007-09-26  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c (install_new_value): Don't
        call value_get_print_value when a value is
        lazy.  Update the print_value member in a
        single place.

2007-09-26  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (create_breakpoint): Set
        condition on each location, not on the first
        location of breakpoint.
        
2007-09-26  Jim Blandy  <jimb@codesourcery.com>

        * remote.c (getpkt_sane): Fix error message.  No animals were
        harmed in the making of this debugger.

2007-09-26  Pierre Muller  <muller@ics.u-strasbg.fr>

        * p-typeprint.c: Fix 11 ARI reported problems.
        (pascal_print_type): Fix 4 operator at end of line.
        (pascal_type_print_method_args) : Replace 2 DEPRECATED_STREQN macros 
        using strncmp function.
        (pascal_type_print_base): Fix 2 operator at end of line.
        (pascal_type_print_base) : Replace 3 DEPRECATED_STREQN macros 
        using strncmp function.


2007-09-26  Pierre Muller  <muller@ics.u-strasbg.fr>

        * Fix PR pascal/2231
        dwarf2read.c (read_subroutine_type): 
        All pascal functions are prototyped. 

2007-09-26  Pierre Muller  <muller@ics.u-strasbg.fr>

        * Fix PR pascal/2283
        p-valprint.c (pascal_val_print): correct current language check.
        Also print array of char as strings.


2007-09-26  David Ung  <davidu@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_n32n64_return_value): Fix a comment.

2007-09-25  Pierre Muller  <muller@ics.u-strasbg.fr>

        * p-exp.y: Fix 12 ARI reported problems.
        (name_not_typename): Fix 2 operator at end of line issues.
        (yylex): Fix 3 operator at end of line issues.
        Replace 7 DEPRECATED_STREQ macros using strcmp function.

2007-09-25  David Ung  <davidu@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_n32n64_return_value): Per N32/N64 ABI
        rules return composite types in registers as appropriate.

2007-09-24  Jim Blandy  <jimb@codesourcery.com>

        * symfile.h (struct symfile_segment_data): Doc fixes.
        * symfile.c (symfile_map_offsets_to_segments): Doc fixes.
        Assert that we were passed some loaded segment addresses,
        and that sections' segment numbers are valid.
        Simplify offset calculation.
        * remote.c (get_offsets): Clarify selection of relocate-by-segment
        strategy, and set num_segments correctly.  Delete redundant
        assignments to do_sections.

2007-09-24  Daniel Jacobowitz  <dan@codesourcery.com>

        * frame.c (get_prev_frame_1): Also check for PC in the same register.

2007-09-24  Vladimir Prus  <vladimir@codesourcery.com>
        
        * breakpoint.c (remove_sal): New.
        (expand_line_sal_maybe): New.
        (create_breakpoints): Call expand_line_sal_maybe.
        (clear_command): Add comment.
        (breakpoint_re_set_one): Call expand_line_sal_maybe.
        * linespec.c (decode_indirect): Set explicit_pc to 1.
        (decode_all_digits): Set explicit_line to 1.
        (append_expanded_sal): New.
        (expand_line_sal): New.
        * linespec.h (expand_line_sal): Declare.
        * symtab.c (init_sal): Initialize explicit_pc 
        and explicit_line.
        * symtab.h (struct symtab_and_line): New fields
        explicit_pc and explicit_line.  

2007-09-23  Daniel Jacobowitz  <dan@codesourcery.com>

        * infcall.c (call_function_by_hand): Handle language-specific
        pass and return by reference.

        * cp-abi.c (cp_pass_by_reference): New.
        * cp-abi.h (cp_pass_by_reference): Declare.
        (struct cp_abi_ops): Add pass_by_reference.
        * gnu-v3-abi.c (gnuv3_pass_by_reference): New.
        (init_gnuv3_ops): Set pass_by_reference.

        * language.c (language_pass_by_reference): New.
        (default_pass_by_reference): New.
        (unknown_language_defn, auto_language_defn, local_language_defn): Add
        default_pass_by_reference.
        * langauge.h (struct language_defn): Add la_pass_by_reference.
        (language_pass_by_reference, default_pass_by_reference): Declare.
        * ada-lang.c (ada_language_defn): Add default_pass_by_reference.
        * c-lang.c (c_language_defn, asm_language_defn)
        (minimal_language_defn): Likewise.
        (cplus_language_defn): Add cp_pass_by_reference.
        * f-lang.c (f_language_defn): Add default_pass_by_reference.
        * jv-lang.c (java_language_defn): Likewise.
        * m2-lang.c (m2_language_defn): Likewise.
        * objc-lang.c (objc_language_defn): Likewise.
        * p-lang.c (pascal_language_defn): Likewise.
        * scm-lang.c (scm_language_defn): Likewise

2007-09-23  Vladimir Prus  <vladimir@codesourcery.com>

        Allow a code breakpoint to have several locations
        associated with it.
        * breakpoint.h (enum enable_state): Remove the
        bp_shlib_disabled enumerator. 
        (struct bp_location): New members shlib_disabled,
        global_next, enabled and function_name.
        Rename pending to condition_not_parsed.

        * breakpoint.c (ALL_BP_LOCATIONS): Iterate over global_next.
        (ALL_BP_LOCATIONS_SAFE): Likewise.
        (breakpoint_enabled): Don't check for pending.
        (condition_command): Free and update all locations of
        a breakpoint.
        (insert_bp_location): Adjust.
        (software_breakpoint_inserted_here_p): Don't care
        if breakpoint is enabled, as soon as it's inserted.
        (print_it_typical): Print bpstat's location, not
        bpstat's breakpoint's location.
        (bpstat_stop_status): Iterate over all locations, not
        all breakpoints.
        (print_breakpoint_location): New.
        (print_one_breakpoint): Renamed to
        (print_one_breakpoint_location): ...this. Take
        parameters to describe which location is being
        printed. Modify code to properly print header
        for several locations and individual locations.
        (print_one_breakpoint): Print all locations.
        (breakpoint_has_pc): New.
        (describe_other_breakpoints): Use the above.
        (check_duplicates): Renamed to...
        (check_duplicates_for): .. this.
        (check_duplicates): Use check_duplicates_for.
        (allocate_bp_location): Adjust.
        (set_raw_breakpoint_without_location): New,
        extracted from set_raw_breakpoint.
        (set_breakpoint_location_function): New.
        (set_raw_breakpoint): Use 
        set_raw_breakpoint_without_location.
        (make_breakpoint_permanent): Mark all locations
        as inserted.
        (disable_breakpoints_in_shlibs): Iterate over
        locations.
        (disable_breakpoints_in_unloaded_shlib): Likewise.
        (re_enable_breakpoints_in_shlibs): Likewise.
        (mention): Say "pending" when breakpoint has
        zero locations.  If breakpoint has more than one
        location, say so.
        (add_location_to_breakpoint): New.
        (create_breakpoint): Accept symtabs_and_lines, not
        symtab_and_line. Pass extra sals to 
        add_location_to_breakpoint.
        (create_breakpoints): Pass symtabs_and_lines to
        create_breakpoints.
        (break_command_1): Make pending breakpoints
        have zero locations.
        (do_captured_breakpoint): Remove wrong allocation.
        (clear_command): Iterate over all locations.
        (unlink_locations_from_global_list): Renamed
        from unlink_location_from_global_list. Remove
        all locations.
        (delete_breakpoint): Remove all locations.
        Iterate over all locations when deciding which
        other location to re-enable.
        (all_locations_are_pending): New.
        (update_breakpoint_locations): Renamed from
        update_breakpoint_location. Try to match old
        and new locations using names of containing
        functions.
        (breakpoint_re_set_one): Adjust.
        (find_location_by_number): New.
        (disable_command): Allow disabling individual location.
        (enable_command): Allow enabling individual location.
        * breakpoint.c: Adjust all uses of breakpoint's
        enable state to for bp_shlib_disabled change.
        
2007-09-22  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (do_restore_lang_radix_cleanup): Remove.
        (resolve_pending_breakpoint): Remove.
        (re_enable_breakpoints_in_shlibs): Remove.
        (unlink_locations_from_global_list): New.
        (update_breakpoint_locations): New.
        (breakpoint_re_set_one): Don't bail out on pending breakpoints.
        Use parse_condition and update_breakpoint_location to
        reset breakpoint.  Ignore 'symbol not found' error from
        decode_line_1.
        (breakpoint_re_set): Don't emit newline before the
        reason why breakpoint is not reset.
        (do_enable_breakpoint): Don't specially process pending
        breakpoints.
        (free_bp_location): New.
        (break_command_1): For pending breakpoints, initialize
        all fields of a sal with zeroes.
        * breakpoint.h (re_enable_breakpoints_in_shlibs): Remove.
        * infcmd.c (post_create_inferior): Don't call
        re_enable_breakpoints_in_shlibs.
        * infrun.c (handle_inferior_event): Likewise.
        * solib-irix.c (irix_solib_create_inferior_hook): Likewise.
        * solib-osf.c (osf_solib_create_inferior_hook): Likewise.
        * win32-nat.c (get_win32_debug_event): Likewise.
        
2007-09-22  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (create_breakpoint): Split from
        create_breakpoints, implementing most of its logic.
        Take just a single sal, single address string and
        single condition.  Do not take parsed condition at
        all.
        (create_breakpoints): Just call create_breakpoint
        for each sal.
        (find_condition_and_thread): New.
        (break_command_1): Use find_condition_and_thread.
        Do not keep parsed conditions.
        (do_captured_breakpoint): Don't convert
        condition string to struct expression.
        
2007-09-22  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.h (struct breakpoint): Move the cond 
        field to...
        (struct bp_location): Here.
        * breakpoint.c (condition_command, bpstat_stop_status)
        (print_one_breakpoint, allocate_bp_location)
        (solib_load_unload_1, create_fork_vfork_event_catchpoint)
        (create_exec_event_catchpoint, create_breakpoints)
        (break_command_1, watch_command_1, handle_gnu_v3_exceptions)
        (create_ada_exception_breakpoint, set_breakpoint_sal)
        (delete_breakpoint, breakpoint_re_set_one): Adjust.
        * tui/tui-winsource.c (tui_update_breakpoint_info): Adjust.
        
2007-09-22  Vladimir Prus  <vladimir@codesourcery.com>

        Associate bp_stat with bp_location, not breakpoint.
        * breakpoint.h (breakpoint_at): Change type
        to bp_location*.
        * breakpoint.c (bpstat_alloc): Take bp_location,
        not breakpoint.
        (bpstat_find_breakpoint): Look at bpstat's location's
        owner, not at bpstat->breakpoint_at.
        (bpstat_find_step_resume_breakpoint): Likewise.
        (bpstat_num): Likewise.
        (print_it_typical): Likewise.
        (print_bp_stop_message): Likewise.
        (watchpoint_check): Likewise.
        (bpstat_what): Likewise.
        (bpstat_get_triggered_catchpoints): Likewise.
        (breakpoint_auto_delete): Likewise.
        (delete_breakpoint): Likewise.  
        (bpstat_stop_status): Pass location, not breakpoint,
        to bpstat_alloc.  Look at bpstat's location's
        owner, not at bpstat->breakpoint_at.

2007-09-21  Jim Blandy  <jimb@codesourcery.com>

        * macrotab.h (new_macro_table): Document that removing information
        from an obstack/bcache-managed macro table leaks memory.
        * macrotab.c (macro_free, macro_bcache_free): Instead of asserting
        that data is never freed in obstack/bcache-managed macro tables,
        just leak the storage.
        (macro_undef): If we're undefining a macro at exactly the same
        source location that we defined it, simply remove the definition
        altogether.

2007-09-21  Joel Brobecker  <brobecker@adacore.com>

        * symfile.h (struct sym_fns): Add new field sym_read_linetable.
        * coffread.c, dbxread.c, elfread.c, mipsread.c somread.c:
        Adjust the struct sym_fns object accordingly by setting
        the new field to NULL.
        * xcoffread.c (aix_process_linenos): Make static.
        (xcoff_sym_fns): Set new field to aix_process_linenos.
        * buildsym.c (end_symtab): Replace call to PROCESS_LINENUMBER_HOOK
        by call to new the new sym_fns sym_read_linetable function.
        * config/powerpc/aix.mt (DEPRECATED_TM_FILE): Delete.
        * config/rs6000/tm-rs6000.h: Delete.

2007-09-21  David Ung  <davidu@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_n32n64_push_dummy_call): Per N32/N64 ABI
        rules do not treat composite types specially.

2007-09-20  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips32_in_function_epilogue_p): New function.
        (mips16_in_function_epilogue_p): Likewise.
        (mips_in_function_epilogue_p): Likewise.
        (mips_gdbarch_init): Register mips_in_function_epilogue_p().

2007-09-19  Joel Brobecker  <brobecker@adacore.com>

        * configure.ac: Add check for "etext".
        * configure, config.in: Regenerate.
        * maint.c (TEXTEND): Only define if either _etext or etext
        are available.
        Disable the profiling functionality if TEXTEND is not defined.

2007-09-19  Daniel Jacobowitz  <dan@codesourcery.com>

        * mips-tdep.c (mips_stub_frame_cache): Correct the saved return
        address register.  Correct the call to frame_id_build.
        (mips_stub_frame_sniffer): Use the stub unwinder when the PC
        is invalid.

2007-09-18  Joel Brobecker  <brobecker@adacore.com>

        * ia64-tdep.c (refine_prologue_limit): Make sure we don't scan
        the linetable past the function end.

2007-09-18  James E. Wilson  <wilson@specifix.com>

        * MAINTAINERS: Update my email address.

2007-09-18  Jerome Guitton  <guitton@adacore.com>

        * inf-ttrace.c (inf_ttrace_private_thread_info): New structure type.
        (inf_ttrace_delete_dying_threads_callback): New function.
        (inf_ttrace_resume): After resuming the execution, iterate over
        the dying threads to delete them for the thread list.
        (inf_ttrace_wait): on TTEVT_LWP_EXIT and TTEVT_LWP_TERMINATE,
        mark the corresponding thread as dying instead of removing it
        from the thread list.
        (inf_ttrace_thread_alive): return 0 for dying threads.

2007-09-17  Joel Brobecker  <brobecker@adacore.com>

        * infrun.c (insert_step_resume_breakpoint_at_frame): Add assertion
        that return_frame is not null.

2007-09-17  Joel Brobecker  <brobecker@adacore.com>

        * solib-svr4.c: Add include of "auxv.h".
        (enable_break): Use the AT_BASE auxiliary entry if available.
        * Makefile.in (solib-svr4.o): Update dependencies.

2007-09-17  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

2007-09-17  Jerome Guitton  <guitton@adacore.com>

        * dwarf2loc.c (dwarf_expr_frame_base): Guard against NULL.
        * Makefile.in (dwarf2loc.o): Depend on gdb_assert.h.

2007-09-16  Vladimir Prus  <vladimir@codesourcery.com>

        * mi/mi-cmds.c (mi_cmds): Register -list-features.
        * mi/mi-cmds.h (mi_cmd_list_features): New.
        * mi/mi-main.c (mi_cmd_list_features): New.
        
2007-09-11  Joel Brobecker  <brobecker@adacore.com>

        GDB 6.7 branch created (branch timestamp: 2007-09-07 14:00 UTC)
        * version.in: Bump version to 6.7.50-20070911-cvs.

2007-09-10  Daniel Jacobowitz  <dan@codesourcery.com>

        * thread.c (free_thread): Do not delete the step resume breakpoint
        right away.

2007-09-10  Daniel Jacobowitz  <dan@codesourcery.com>

        * arch-utils.c (gdbarch_info_fill): Also try core_bfd.
        * corelow.c (core_read_description): New.
        (init_core_ops): Set to_read_description.
        * gdbarch.sh: Add gdbarch_core_read_description.
        * mips-linux-tdep.c (mips_linux_core_read_description): New.
        (mips_linux_init_abi): Call set_gdbarch_core_read_description.
        * mips-tdep.c (mips_tdesc_gp32, mips_tdesc_gp64): New.
        (mips_register_g_packet_guesses): Use them.
        (_initialize_mips_tdep): Initialize them.
        * mips-tdep.h (mips_tdesc_gp32, mips_tdesc_gp64): Declare.
        * gdbarch.h, gdbarch.c: Regenerated.

2007-09-10  Ulrich Weigand  <uweigand@de.ibm.com>

        * infrun.c (stepping_past_breakpoint): New global variable.
        (stepping_past_breakpoint_ptid): Likewise.
        (prepare_to_proceed): Add STEP parameter.  Do not check for Ctrl-C.
        Only switch threads if we need to single-step over a breakpoint hit
        in the previously selected thread.  If stepping, remember previous
        thread to switch back to in STEPPING_PAST_BREAKPOINT[_PTID].  Call
        switch_to_thread instead of copying its contents.
        (proceed): Pass STEP to prepare_to_proceed.  Always set ONEPROC if
        prepare_to_proceed returns true.
        (init_wait_for_inferior): Reset STEPPING_PAST_BREAKPOINT.
        (context_switch): Call switch_to_thread.
        (handle_inferior_event): Switch back to previous thread if requested
        in STEPPING_PAST_BREAKPOINT[_PTID] by prepare_to_proceed.
        * gdbthread.h (switch_to_thread): Add prototype.
        * thread.c (switch_to_thread): Make global.

2007-09-07  Pierre Muller  <muller@ics.u-strasbg.fr>

         * p-valprint.c: Fix 7 ARI reported problems.
         (pascal_val_print): Fix one operator at end of line issue.
         Use paddress function to remove use of
         deprecated_print_address_numeric function (2 times).
         Use SYMBOL_LINKAGE_NAME instead of DEPRECATED_SYMBOL_NAME.
         (pascal_value_print): Fix 3 operator at end of line issues.

2007-09-07  Daniel Jacobowitz  <dan@codesourcery.com>

        PR gdb/2103
        * arm-tdep.c (arm_in_call_stub): Delete.
        (arm_skip_stub): Handle from_arm and from_thumb stubs.

2007-09-06  Daniel Jacobowitz  <dan@codesourcery.com>

        * ppc-sysv-tdep.c (do_ppc_sysv_return_value): Handle other integer
        types.

2007-09-04  Daniel Jacobowitz  <dan@codesourcery.com>
            Jim Blandy  <jimb@codesourcery.com>

        * NEWS: Update description of string changes.  Mention print/s.
        * c-valprint.c (textual_element_type): New.
        (c_val_print): Use it.  Do not skip address printing for pointers
        with a string format.
        (c_value_print): Doc update.
        * dwarf2read.c (read_array_type): Use make_vector_type.
        * gdbtypes.c (make_vector_type): New.
        (init_vector_type): Use it.
        (gdbtypes_post_init): Initialize builtin_true_unsigned_char.
        (_initialize_gdbtypes): Mark int8_t and uint8_t as TYPE_FLAG_NOTTEXT.
        * gdbtypes.h (struct builtin_type): Add builtin_true_unsigned_char.
        (TYPE_FLAG_NOTTEXT, TYPE_NOTTEXT): New.
        (make_vector_type): New.
        * printcmd.c (print_formatted): Only handle 's' and 'i' for examine.
        Call the language print routine for string format.
        (print_scalar_formatted): Call val_print for string format.  Handle
        unsigned original types for char format.
        (validate_format): Do not reject string format.
        * stabsread.c (read_type): Use make_vector_type.
        * xml-tdesc.c (tdesc_start_vector): Use init_vector_type.

2007-09-04  Michael Snyder  <msnyder@access-company.com>

        * expprint.c (print_subexp_standard): Check strchr for null.
        * Makefile.in (expprint.o): Depend on gdb_assert.h.

        * gnu-v2-abi.c (gnuv2_value_rtti_type): Guard against null.

        * stabsread.c (patch_block_status): Guard against null.
        * Makefile.in (stabsread.o): Depend on gdb_assert.h.

2007-09-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * printcmd.c (printf_command): Handle ptr_arg.  Correct typo
        in internal error message.

2007-09-04  Pedro Alves  <pedro_alves@portugalmail.pt>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * infcmd.c (post_create_inferior): Update comment.
        (run_command_1): Always call post_create_inferior with 0 as
        from_tty.

        * i386-cygwin-tdep.h: New.
        * i386-cygwin-tdep.c: Include "i386-cygwin-tdep.h".
        (win32_xfer_shared_library): Make it extern.

        * win32-nat.c: Include gdb_obstack.h and xml-support.h and
        i386-cygwin-tdep.h.
        (win32_so_ops): Delete.
        (get_relocated_section_addrs): Delete.
        (solib_symbols_add): Delete.
        (register_loaded_dll): Delete.
        (win32_make_so): New.
        (handle_load_dll): Use win32_make_so.
        (win32_free_so): Free the passed in so.
        (win32_relocate_section_addresses): Delete.
        (win32_solib_create_inferior_hook): Delete.
        (handle_unload_dll): Don't add PE offset here.  Free so with
        win32_free_so instead of free_so.
        (win32_special_symbol_handling): Delete.
        (get_win32_debug_event): Remove unneeded calls.  Set state to
        TARGET_WAITKIND_LOADED on a dll unload.
        (do_initial_win32_stuff): Clear cygwin_load_start and
        cygwin_load_end.
        (map_code_section_args): Delete.
        (dll_code_sections_add): Delete.
        (core_section_load_dll_symbols): Delete.
        (win32_xfer_shared_libraries): New.
        (win32_current_sos): Delete.
        (win32_xfer_partial): New.
        (open_symbol_file_object): Delete.
        (in_dynsym_resolve_code): Delete.
        (init_win32_ops): Set win32_xfer_partial as to_xfer_partial member
        of win32_ops.  Remove win32_so_ops settings.  Don't set
        current_target_so_ops here.

        * Makefile.in (i386_cygwin_tdep_h): New variable.
        (i386-cygwin-tdep.o): Update dependencies.
        (win32-nat.o): Update dependencies.

2007-09-04  Pedro Alves  <pedro_alves@portugalmail.pt>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * gdbarch.sh (core_xfer_shared_libraries): New.

        * corelow.c (core_xfer_partial): Handle TARGET_OBJECT_LIBRARIES.

        * gdb_obstack.h (obstack_grow_str, obstack_grow_str0): New.

        * xml-support.c (gdb_xml_parse): Debug output tweaks.
        (xml_escape_text): New.
        * xml-support.h (xml_escape_text): Declare.

        * config/i386/cygwin.mh (NATDEPFILES): Move corelow.o to ...
        * config/i386/cygwin.mt (TDEPFILES): ... here.

        * win32-nat.c: (fetch_elf_core_registers): Delete.
        (win32_elf_core_fn): Delete.
        (_initialize_core_win32): Delete.

        * i386-cygwin-tdep.c: Include "regset.h", "gdb_objstack.h",
        "xml-support.h" and "gdbcore.h".
        (i386_win32_gregset_reg_offset): New.
        (I386_WIN32_SIZEOF_GREGSET): New.
        (i386_win32_regset_from_core_section): New.
        (win32_xfer_shared_library): New.
        (struct cpms_data): New.
        (core_process_module_section): New.
        (win32_core_xfer_shared_libraries): New.
        (i386_cygwin_skip_trampoline_code): Register gregset_reg_offset,
        gregset_num_regs, sizeof_gregset members of tdep.  Register
        regset_from_core_section and core_xfer_shared_libraries callbacks.

        * Makefile.in (i386-cygwin-tdep.o): Update dependencies.
        * gdbarch.h, gdbarch.c: Regenerate.

2007-09-03  Daniel Jacobowitz  <dan@codesourcery.com>

        * corelow.c (core_xfer_partial): Pass writebuf to
        deprecated_xfer_memory in TARGET_OBJECT_MEMORY write case.

2007-09-03  Pedro Alves  <pedro_alves@portugalmail.pt>

        * arm-tdep.h (arm_skip_stub): Declare.
        * arm-wince-tdep.c: Don't include "solib-svr4.h".  Include
        "gdbcore.h".
        (arm_pe_skip_trampoline_code): New function.
        (arm_wince_init_abi): Register arm_pe_skip_trampoline_code as
        gdbarch_skip_trampoline_code callback.
        * Makefile.in (arm-wince-tdep.o): Update dependencies.

2007-09-03  Daniel Jacobowitz  <dan@codesourcery.com>

        * MAINTAINERS: Move Fred Fish to Past Maintainers.

2007-09-03  Daniel Jacobowitz  <dan@codesourcery.com>

        * configure.ac: Add --with-expat.
        * configure: Regenerated.

2007-09-03  Andreas Schwab  <schwab@suse.de>

        * configure.ac: Accept --with-system-readline.
        (READLINE, READLINE_DEPS, READLINE_CFLAGS): Define and substitute.
        * configure: Regenerate.
        * Makefile.in (READLINE, READLINE_DEPS, READLINE_CFLAGS): Use
        substituted values.
        (CDEPS): Use $(READLINE_DEPS) instead of $(READLINE).

2007-09-03  Maxim Grigoriev  <maxim2405@gmail.com>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * mi-main.c (mi_load_progress): Handle MI2 and MI3 interpreters.

2007-09-02  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * top.c (print_gdb_version): Fixed a string end-of-line compiler error.

2007-09-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * top.c (print_gdb_version): Update for GPL version 3.

2007-09-02  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * NEWS: Mention the build-id .debug files verification.

2007-09-02  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * linux-nat.c (linux_nat_make_corefile_notes): Fixed a buffer overflow.

2007-09-01  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * Makefile.in (symfile.o): Update dependencies.
        * symfile.c (symbol_file_add_with_addrs_or_offsets): Initialize the
        DEBUGFILE variable.  FIND_SEPARATE_DEBUG_FILE called only if !PSYMTABS.
        (struct build_id): New structure.
        (build_id_bfd_get, build_id_verify, build_id_to_debug_filename): New.
        (find_separate_debug_file): New variable BUILD_ID.
        Call BUILD_ID_BFD_GET with BUILD_ID_TO_DEBUG_FILENAME as the first try.

2007-08-31  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c (struct varobj): Fix comment
        for the type member not to lie when it can be 
        NULL.
        
2007-08-31  Vladimir Prus  <vladimir@codesourcery.com>

        Implement -var-info-path-expression.

        * mi/mi-cmds.h (mi_cmd_var_info_path_expression):
        Declare.
        * mi/mi-cmds.c (mi_cmds): Register var-info-path-expression.
        * mi/mi-cmd-var.c (mi_cmd_var_info_path_expression): New.
        * varobj.c (struct varobj): New field 'path_expr'.
        (c_path_expr_of_child, cplus_path_expr_of_child)
        (java_path_expr_of_child): New.
        (struct language_specific): New field path_expr_of_child.
        (varobj_create): Initialize the path_expr field.
        (varobj_get_path_expr): New.
        (new_variable): Initialize the path_expr field.
        (free_variable): Free the path_expr field.
        (adjust_value_for_children_access): New parameter
        WAS_TYPE.
        (c_number_of_children): Adjust.
        (c_describe_child): New parameter CFULL_EXPRESSION.
        Compute full expression.
        (c_value_of_child, c_type_of_child): Adjust.
        (cplus_number_of_children): Adjust.
        (cplus_describe_child): New parameter CFULL_EXPRESSION.
        Compute full expression.
        (cplus_name_of_child, cplus_value_of_child)
        (cplus_type_of_child): Adjust.
        * varobj.h (varobj_get_path_expr): Declare.

2007-08-31  Vladimir Prus  <vladimir@codesourcery.com>

        * mi/mi-cmd-var.c (print_varobj): If a varobj
        type is NULL, don't try to print it.
        
2007-08-30  Alan Modra  <amodra@bigpond.net.au>

        * ppc-linux-nat.c (right_fill_reg): Delete.
        (supply_gregset): Use ppc_supply_gregset.
        (supply_fpregset): Use ppc_supply_fpregset.
        (fill_gregset): Use ppc_collect_gregset.
        (fill_fpregset): Use ppc_collect_fpregset.
        * ppc-linux-tdep.c (PPC_LINUX_PT_*): Don't define.
        (right_supply_register, ppc_linux_supply_gregset): Delete.
        (ppc32_linux_supply_gregset, ppc64_linux_supply_gregset): Delete.
        (ppc_linux_supply_fpregset): Delete.
        (ppc_linux_collect_gregset): New function.
        (ppc32_linux_reg_offsets, ppc64_linux_reg_offsets): New.
        (ppc32_linux_gregset, ppc64_linux_gregset): Update to use reg offsets,
        ppc_linux_supply_gregset, and ppc_collect_gregset.
        (ppc_linux_fpregset): Rename to ppc32_linux_fpregset and update.
        (ppc_linux_gregset, ppc_linux_fpregset): New functions.
        (ppc_linux_regset_from_core_section): Update.
        * ppc-tdep.h (ppc_linux_gregset, ppc_linux_fpregset): Declare.
        (ppc_linux_supply_gregset, ppc_linux_supply_fpregset): Delete.
        (struct ppc_reg_offsets): Add gpr_size, xr_size, fpscr_size fields.
        * ppcobsd-tdep.c (ppcobsd_supply_gregset): Delete FIXME and assert.
        (ppcobsd_collect_gregset): Likewise.
        (_initialize_ppcnbsd_tdep): Init gpr_size, xr_size, fpscr_size.
        * ppcnbsd-tdep.c (_initialize_ppcobsd_tdep): Likewise.
        * ppcobsd-nat.c (_initialize_ppcobsd_nat): Likewise.
        * rs6000-aix-tdep.c (rs6000_aix32_reg_offsets): Likewise.
        (rs6000_aix64_reg_offsets): Likewise.
        (rs6000_aix_supply_regset): Call ppc_supply_fpregset without testing
        ppc_floating_point_unit_p.
        (rs6000_aix_collect_regset): Similarly.
        * rs6000-tdep.c (ppc_supply_reg): Add regsize param.  Adjust offset
        when regsize is larger than regcache register size.
        (ppc_collect_reg): Similarly zero pad when regsize is larger than
        regcache register size.
        (ppc_greg_offset): New function, split out from..
        (ppc_supply_gregset): ..here.  Separate code handling all regs from
        single reg case.  Correct xer offset.
        (ppc_fpreg_offset): New function, split out from..
        (ppc_supply_fpregset): ..here.  Separate code handling all regs from
        single reg case.
        (ppc_collect_gregset, ppc_collect_fpregset): Likewise.
        (ppc_supply_fpregset, ppc_collect_fpregset): Don't assert we have
        a fp unit, instead return if no fp.

2007-08-29  Jim Blandy  <jimb@codesourcery.com>

        * breakpoint.c (watch_command_1): Remove '#ifdef HPUXHPPA' block;
        this code has not been compiled for two years.

2007-08-29  Michael Snyder  <msnyder@access-company.com>

        * event-top.c (gdb_readline2): Return after EOF.

2007-08-29  Joel Brobecker  <brobecker@adacore.com>

        * symtab.c: Remove a function that has been commented out 3 years ago.

2007-08-29  Randolph Chung  <tausq@debian.org>

        * hppa-tdep.c (hppa32_cannot_fetch_register)
        (hppa64_cannot_fetch_register): New functions.
        (hppa_gdbarch_init): Set cannot_fetch_register appropriately.
        * hppa-tdep.h (hppa_regnum): Add HPPA_CR26_REGNUM.

2007-08-28  Michael Snyder  <msnyder@access-company.com>

        * mi/mi-cmd-var.c (mi_print_value_p): No longer necessary to 
        check for null before calling check_typedef.

        * NEWS: Mention Coverity bug fixes.

2007-08-27  Markus Deuling  <deuling@de.ibm.com>

        * spu-tdep.c (spu_pointer_to_address): New function.
        (spu_integer_to_address): Likewise.
        (spu_gdbarch_init): Add spu_pointer_to_address and 
        spu_integer_to_address to gdbarch.

2007-08-26  Pedro Alves  <pedro_alves@portugalmail.pt>

        * arm-wince-tdep.c (ARM_WINCE_JB_PC): Change to 10.

2007-08-23  Joel Brobecker  <brobecker@adacore.com>

        * Makefile.in (copying.c): Use the top-level COPYING3 as the file
        that contains the GDB license.
        * copying.awk: Adjust to the GPLv3 wording.
        * copying.c: Regenerate.

2007-08-23  Joel Brobecker  <brobecker@adacore.com>

        * copying.awk: Protoization, and i18n markup.

2007-08-23  Joel Brobecker  <brobecker@adacore.com>

        * config/djgpp/djconfig.sh: Switch license to GPLv3.
        * copyright.sh: Likewise.
        * gdb-events.sh: Likewise.
        * gdb_gcore.sh: Likewise.
        * gdb_mbuild.sh: Likewise.
        * gdbarch.sh: Likewise.
        * observer.sh: Likewise.
        * features/feature_to_c.sh: Likewise.
        * regformats/regdat.sh: Likewise.

2007-08-23  Joel Brobecker  <brobecker@adacore.com>

        Switch the license of all .c files to GPLv3.
        Switch the license of all .h files to GPLv3.
        Switch the license of all .cc files to GPLv3.

2007-08-23  Joel Brobecker  <brobecker@adacore.com>

        * configure.ac: Switch license to GPLv3.

2007-08-22  Daniel Jacobowitz  <dan@codesourcery.com>

        * mips-tdep.c (mips_gdbarch_init): Use Tag_GNU_MIPS_ABI_FP to
        determine the file's FPU type.

2007-08-22  Daniel Jacobowitz  <dan@codesourcery.com>

        * mips-tdep.c (mips_n32n64_fp_arg_chunk_p): New.
        (mips_n32n64_push_dummy_call): Always increment float_argreg along
        with argreg.  Use mips_n32n64_fp_arg_chunk_p.

2007-08-22  Daniel Jacobowitz  <dan@codesourcery.com>

        * solib-svr4.c (scan_dyntag): Only read target memory when necessary.
        Fix formatting.
        (elf_locate_base): Look for DT_MIPS_RLD_MAP first.  Expand comments.
        (elf_lookup_lib_symbol): Fix formatting.

2007-08-21  Michael Snyder  <msnyder@access-company.com>

        * dbxread.c (read_dbx_symtab): Guard null deref.
        Break up long line.

        * valops.c (find_overload_match): Guard against NULL.

2007-08-21  Daniel Jacobowitz  <dan@codesourcery.com>

        * MAINTAINERS (Patch Champions): Remove self.

2007-08-21  Chris Smith  <chris.smith@st.com>

        * cli/cli-script.c (read_command_lines): Call dont_repeat for each
        line.

2007-08-18  Michael Snyder  <msnyder@access-company.com>

        * stabsread.c (dbx_lookup_type): Memory leak.

        * event-loop.c (delete_async_signal_handler): Move pointer null
        test to before pointer dereference.

        * ui-out.c (append_header_to_list): Possible cut and paste error.

        * MAINTAINERS: white space tweak.

2007-08-17  Michael Snyder  <msnyder@access-company.com>

        * stack.c (print_frame): Memory leak.

        * completer.c (filename_completer): Avoid memory leak.
        Remove unnecessary nested block.

        * c-exp.y (parse_number): Memory leak.

        * completer.c (location_completer): Must free 'fn_list', except 
        in the one case where it is returned (as 'list').

        * varobj.c (value_of_root): Memory leak.

        * gdbtypes.h (virtual_base_list): Remove export decl.
        * gdbtypes.c (virtual_base_list): Make static.  Not called outside.
        (virtual_base_index): Memory leak.
        (virtual_base_index_skip_primaries): Ditto.

2007-08-17  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.c (ARG_NOF, ARG_1ST, PS_WOE, PS_EXC, C0_MAXOPDS)
        (C0_NREGS, C0_CLESV, C0_SP, C0_FP, C0_RA, C0_ARGS, C0_NARGS)
        (C0_CONST, C0_INEXP, C0_NOSTK): New macros.
        (xtensa_read_register): New function.
        (xtensa_windowed_frame_cache, xtensa_call0_frame_cache, xtensa_c0reg)
        (xtensa_insn_kind): New types.
        (xtensa_frame_cache, xtensa_alloc_frame_cache, xtensa_frame_cache)
        (xtensa_frame_prev_register, xtensa_return_value, xtensa_skip_prologue)
        (xtensa_verify_config, xtensa_pseudo_register_read)
        (xtensa_pseudo_register_write, xtensa_extract_return_value)
        (xtensa_store_return_value)
        (xtensa_push_dummy_call): Extended to support Xtensa Call0 ABI.
        (windowing_enabled, extract_call_winsize, xtensa_unwind_dummy_id)
        (xtensa_frame_this_id, xtensa_frame_prev_register)
        (xtensa_register_type, xtensa_reg_to_regnum): Cosmetic changes.
        (call0_frame_cache, call0_frame_get_reg_at_entry)
        (call0_classify_opcode, call0_track_op)
        (call0_analyze_prologue, call0_frame_cache): New functions.

2007-08-17  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (bpstat_free): New.
        (bpstat_clear): Use bpstat_free.
        (delete_breakpoint): Document why we cannot
        remove bpstats from stop_bpstat.
        * breakpoint.h (bpstat_free): Declare.
                
2007-08-16  Michael Snyder  <msnyder@access-company.com>

        * event-loop.c (gdb_wait_for_event): Move statement into "if" block.

2007-08-15  Paul Hilfinger  <hilfinger@adacore.com>
            Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (resolve_subexp): Correct arity of binary operators.

2007-08-15  Paul Hilfinger  <hilfinger@adacore.com>
            Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (possible_user_operator_p): Alternative fix to last
        checkin guarding against NULL.

2007-08-14  Michael Snyder  <msnyder@access-company.com>

        * tui-command.c, tui-data.c, tui-disasm.c, tui-file.c, tui-io.c,
        tui-layout.c, tui-regs.c, tui-source.c, tui-win.c, tui-windata.c,
        tui-wingeneral.c, tui-winsource.c: Coding standard, && and ||
        go at beginning of new line.

        * tui-data.c, tui-data.h, tui-disasm.c, tui-disasm.h, tui-hooks.c,
        tui-io.c, tui-layout.c, tui-layout.h, tui-out.c, tui-regs.c,
        tui-source.c, tui-source.h, tui-stack.c, tui-win.c, tui-win.h,
        tui-windata.c, tui-windata.h, tui-wingeneral.c, tui-winsource.c,
        tui-winsource.h, tui.c, tui.h: Function declarations and 
        definitions, wrap long lines.

        * tui-command.c, tui-data.c, tui-disasm.c, tui-layout.c,
        tui-regs.c, tui-win.c, tui-windata.c, tui-winsource.c, tui.c:
        Reformat block comments to GNU standard.

        * tui-command.c, tui-data.c, tui-data.h, tui-disasm.c, tui-file.c,
        tui-hooks.c, tui-interp.c, tui-io.c, tui-layout.c, tui-out.c,
        tui-regs.c, tui-regs.h, tui-source.c, tui-stack.c, tui-win.c,
        tui-windata.c, tui-wingeneral.c, tui-winsource.c, tui-winsource.h,
        tui.c, tui.h: Comment reformatting to coding standard (capitals, 
        spaces after periods, etc).     

        * tui-data.c, tui-data.h, tui-disasm.c, tui-hooks.c, tui-layout.c,
        tui-regs.c, tui-source.c, tui-stack.c, tui-win.c, tui-windata.c,
        tui-wingeneral.c, tui-wingeneral.h, tui-winsource.c, tui.c,
        tui-winsource.h: Whitespace changes, fix pointer declarations
        to be consistant.

2007-08-14  Joel Brobecker  <brobecker@adacore.com>
            Michael Snyder  <msnyder@access-company.com>

        * ada-lang.c (field_alignment): Guard against NULL.

2007-08-14  Joel Brobecker  <brobecker@adacore.com>

        * MAINTAINERS (Global Maintainers): Add self.

2007-08-14  Michael Snyder  <msnyder@access-company.com>

        * mi/mi-interp.c (mi_cmd_interpreter_exec): Dead code, dead variable.

        * ada-lang.c (possible_user_operator_p): Guard against NULL.

        * varobj.c (cplus_describe_child): Guard against null.
        Use "NULL" instead of "0" to initialize pointers.

2007-08-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * arm-tdep.c (arm_gdbarch_init): Allow unknown ABI and FPU settings
        to match any gdbarch with matching OSABI.  Set default ABI and FPU
        after running the OSABI handler.

2007-08-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * config/i386/linux.mh (NATDEPFILES): Move corelow.o from here...
        * config/i386/linux.mt (TDEPFILES): ...to here.

2007-08-14  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (disable_breakpoints_in_shlibs): Remove
        the 'silent' parameter and code to implement that.
        * breakpoint.h (disable_breakpoints_in_shlibs): Adjust
        prototype.
        * win32-nat.c: Adjust.
        * solib.c: Adjust.
        
2007-08-14  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (update_breakpoints_after_exec): Don't
        set address to zero.

2007-08-13  Michael Snyder  <msnyder@access-company.com>

        * valops.c: Whitespace clean-up.

        * tui/tui-winsource.c (tui_alloc_source_buffer): Clean up allocation.

        * event-top.c (command_line_handler): Memory leak.

        * mi/mi-cmd-var.c (mi_cmd_var_set_format): Memory leak.
        No need to make copy.

        * source.c (find_source_lines): Require symtab 's'.

2007-08-11  Michael Snyder  <msnyder@access-company.com>

        * completer.c: Spelling fix in comments.

2007-08-10  Michael Snyder  <msnyder@access-company.com>

        * gdbtypes.c: Coding standard cleanup.
        * gdbtypes.c: Comment/whitespace cleanup.

        * stabsread.c (read_huge_number): Attempt to compute value before
        values that it depends on.

        * linespec.c (decode_dollar): Dead code, ptr can't be non-null.
        (decode_objc): Use "NULL" instead of 0.
        (find_method): Ditto.
        (decode_all_digits): Ditto.
        (decode_dollar): Ditto.

        * mi/mi-main.c (mi_cmd_data_evaluate_expression): Resource leak.

        * mi/mi-cmd-var.c (mi_cmd_var_list_children): Memory leak.

        * solib-svr4.c (enable_break): Don't free tmp_pathname until
        after closing bfd.

        * completer.c: Comment/whitespace cleanup.

2007-08-10  Joel Brobecker  <brobecker@adacore.com>

        * Makefile.in (i386nbsd-nat.o): Add missing dependency.

2007-08-10  Maxim Grigoriev  <maxim2405@gmail.com>

        * remote-fileio.c (remote_fileio_resize_fd_map): Initialize newly
        allocated file descriptors.

2007-08-10  Joel Brobecker  <brobecker@adacore.com>

        * Makefile.in: Minor cleanup throughout; add some missing variables,
        add some missing rules, remove some rules that are no longer needed,
        and fix the dependencies in several rules.

2007-08-10  Ludovic Courtès  <ludo@gnu.org>

        * Makefile.in (SFILES): Add scm-{exp,lang,valprint}.c.
        (scm_lang_h, scm_tags_h): New.
        (COMMON_OBS): Add scm-{exp,lang,valprint}.o.
        (scm-exp.o, scm-lang.o, scm-valprint.o): New targets.
        * defs.h (enum language): Add `language_scm'.

        * MAINTAINERS: Add Emacs local variables to use UTF-8 upon
        opening.

2007-08-09  Ludovic Courtès  <ludo@gnu.org>

        * MAINTAINERS (Write After Approval): Add myself.

2007-08-09  Michael Snyder  <msnyder@access-company.com>

        * solib.c (solib_open): Memory leak -- openp returns xmalloc buffer.

2007-08-09  Joel Brobecker  <brobecker@adacore.com>

        * solib-som.c (som_relocate_section_addresses): Stop saving
        the $CODE$ section in the so_list structure.

2007-08-08  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): New.
        (xtensa_register_group_t): Add entries for coprocessors.
        * xtensa-tdep.c (xtensa_init_reggroups): New register groups.
        (xtensa_add_reggroups): Likewise.
        (xtensa_register_reggroup_p): Likewise.
        (xtensa_coprocessor_register_group): New function.
        (xtensa_cp): New.

2007-08-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * serial.c (serial_open): Fix the OPEN parameter macro expansion.

2007-08-08  Michael Snyder  <msnyder@access-company.com>

        * target.c (target_read_string): Guard against null.

        * varobj.c (value_of_root): Move alloc after return to avoid leak.

        * tui/tui-layout.c (tui_set_layout): Dead code, dead variable.
        (tui_set_layout_for_display_command): Mem leak.

        * top.c (command_line_input): Memory leak.

        * solib-svr4.c (open_symbol_file_object): Memory leak.
        (svr4_current_sos): Ditto.
        (enable_break): Ditto.

        * cp-valprint.c (cp_print_hpacc_virtual_table_entries): Memory leak.

        * dwarf2read.c (add_partial_symbol): Memory leak.

2007-08-06  Michael Snyder  <msnyder@access-company.com>

        * ada-lang.c (desc_bounds): Comparison of function address to NULL.

2007-08-05  Jim Blandy  <jimb@codesourcery.com>

        * macroexp.c (init_buffer): Remove testing code that overrides the
        caller's length guess.
        (gather_arguments): Use a larger initial size, now that the vector
        growth code has been exercised.

2007-08-05  Pedro Alves  <pedro_alves@portugalmail.pt>

        * solib-target.c (solib_target_relocate_section_addresses): Add
        orig_delta to addr_high.

2007-08-04  Michael Snyder  <msnyder@access-company.com>

        * remote-fileio.c (remote_fileio_func_write): Memory leak.

        * breakpoint.c (print_one_breakpoint): Off by one error.

        * tracepoint.c (add_register): Off by one error.
        (stringify_collection_list): Free malloc buffer.

2007-08-03  Michael Snyder  <msnyder@access-company.com>

        * mi-cmd-var.c (mi_cmd_var_delete): Remove unused variable,
        stop memory leak, straighten out cleanups.

        * jv-lang.c (java_link_class_type): Guard against NULL.

2007-08-02  Michael Snyder  <msnyder@access-company.com>

        * gdbtypes.c (create_set_type): Test should only be done within
        the preceeding if block.  Otherwise, variable is uninitialized.

        * gdbtypes.c (check_typedef): Guard NULL.

2007-08-01  Michael Snyder  <msnyder@access-company.com>

        * cli/cli-decode.c (lookup_cmd): Check for null earlier, to 
        avoid dereference in lookup_cmd_1.

        * tui/tui-data.c (tui_alloc_content): Move assign out of if, 
        clean up long lines.
        (tui_alloc_generic_win_info): Tidy by using XMALLOC macro.
        (tui_alloc_win_info): Ditto.
        (tui_add_content_elements): Ditto.
        * tui/tui-file.c (tui_file_magic): Ditto.

2007-07-31  Michael Snyder  <msnyder@access-company.com>

        * breakpoint.c (breakpoint_init_inferior): Add 'else' to 'if'.
        True and false paths are mutually exclusive.

        * event-top.c (command_line_handler): Add pedantic return.

        * f-valprint.c (info_common_command): Bail out to prevent null
        pointer deref.  Break up a long line.

        * exec.c (xfer_memory): Remove redundant condition from 'if'.

        * symfile.c (reread_separate_symbols): Free xmalloced memory.

        * printcmd.c (build_address_symbolic): Remove dead code and dead 
        variable.

2007-07-31  Daniel Jacobowitz  <dan@codesourcery.com>

        * linespec.c (minsym_found): Advance to the next line if possible.

2007-07-31  Pedro Alves  <pedro_alves@portugalmail.pt>

        * arm-wince-tdep.c (arm_wince_init_abi): Remove svr4 related call.
        * config/arm/wince.mt (TDEPFILES): Remove solib-legacy.o and
        solib-svr4.o, and add solib-target.o

2007-07-27  Michael Snyder  <msnyder@access-company.com>

        * tui/tui-data.c (tui_alloc_generic_win_info): Wrong arg for sizeof.

2007-07-26  Maciej W. Rozycki  <macro@linux-mips.org>

        * MAINTAINERS (Write After Approval): Add myself.

2007-07-26  Maciej W. Rozycki  <macro@mips.com>

        * Makefile.in (MAKEHTMLFLAGS): Also search the current directory
        for include files.

2007-07-25  Maciej W. Rozycki  <macro@mips.com>

        * Makefile.in (MAKEHTMLFLAGS): Remove "-glossary".

2007-07-24  Michael Snyder  <msnyder@access-company.com>

        * solib-svr4.c (svr4_fetch_objfile_link_map): Null pointer check of
        'buffer' must cover both branches that call strcmp (Coverity).

        * stack.c (print_frame_args): Check return value of lookup_symbol.

        * ax-gdb.c (find_field): Guard against null ptr.

2007-07-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * regformats/reg-spu.dat: Fix order of npc, id registers.

2007-07-24  Ulrich Weigand  <uweigand@de.ibm.com>

        * target.c (memory_xfer_partial): Accesses to unmapped overlay
        sections should always go to the executable file.

2004-07-20  Chris Dearman  <chris@mips.com>

        * mips-tdep.c (heuristic_proc_start): Add more MIPS16 function
        prologue instructions.

2007-07-20  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_next_pc): Use is_mips16_addr() instead of
        a direct test.

2007-07-20  Chris Dearman  <chris@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (fetch_mips_16): Fix typos and reformat the
        description.

2007-07-17  Pedro Alves  <pedro_alves@portugalmail.pt>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * config/i386/cygwin.mt (TDEPFILES): Add solib-target.o.
        * coff-pe-read.c (read_pe_exported_syms): Delete verbose
        printf.
        * NEWS: Mention gdbserver DLL support.

2007-07-17  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2read.c (dwarf_decode_lines): Detect address size mismatches.

2007-07-16  H.J. Lu  <hongjiu.lu@intel.com>

        * i386-linux-nat.c (fetch_regs): Work around gcc 3.4 alias
        warning bug.

2007-07-13  Kevin Buettner  <kevinb@redhat.com>

        * mep-tdep.c (mep_analyze_prologue): Update comment for BRA
        instruction case.

2007-07-12  Kevin Buettner  <kevinb@redhat.com>

        * mep-tdep.c (IS_BRA, BRA_DISP): New macros.
        (mep_analyze_prologue): Add case for BRA instruction.

2007-07-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * solib-svr4.c (LM_ADDR_CHECK): Relax prelink recognition heuristic.

2007-07-10  Nick Roberts  <nickrob@snap.net.nz>

        * breakpoint.c: Include "top.h".
        (breakpoint_1): Don't set convenience variable $_ if server prefix
        is used.
        (_initialize_breakpoint): Describe this behaviour in command help.

2007-07-08  Pedro Alves  <pedro_alves@portugalmail.pt>

        * solib-target.c (library_list_start_segment): Cast address to
        CORE_ADDR.

2007-07-06  Mark Kettenis  <kettenis@gnu.org>

        * bsd-uthread.c (bsd_uthread_wait): Don't try to fetch thread IDs
        for terminated processes.

2007-07-05  Michael Snyder  <msnyder@access-company.com>

        * event-top.c (cli_command_loop): Prompt string can (and should)
        be freed after call to readline (Coverity).  Also move local var
        declarations into block where they are used.

        * tui/tui-interp.c (tui_command_loop): Prompt string can (and
        should) be freed after call to readline (Coverity).  Also move
        local var declarations into block where they are used.

2007-07-03  Andreas Schwab  <schwab@suse.de>

        * linux-nat.c (linux_nat_info_proc_cmd): Fix parsing of columns in
        /proc/../stat.

2007-07-03  Paul Gilliam  <pgilliam@us.ibm.com>
            Thiago Bauermann  <bauerman@br.ibm.com>
            Joseph S. Myers  <joseph@codesourcery.com>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * remote.c (remote_check_symbols): Use
        gdbarch_convert_from_func_ptr_addr.
        * infcall.c (find_function_addr): Handle function descriptors
        without debugging information.
        * ppc-linux-tdep.c (ppc_linux_convert_from_func_ptr_addr): Renamed
        from ppc64_linux_convert_from_func_ptr_addr.  Handle -msecure-plt.
        (ppc_linux_init_abi): Always set convert_from_func_ptr_addr.
        * solib-svr4.c (solib_break_names): Remove "._dl_debug_state".
        (bfd_lookup_symbol): Do not take a SECT_FLAGS argument.  Always
        allow SEC_CODE and SEC_DATA.
        (enable_break): Update calls.  Pass current_target to solib_add.
        Use gdbarch_convert_from_func_ptr_addr.

2007-07-03  Ilko Iliev  <iliev@ronetix.at>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * symfile.c (print_transfer_performance): Avoid integer overflow.
        Use larger units.

2007-07-03  Markus Deuling  <deuling@de.ibm.com>

        * cp-namespace.c (lookup_symbol_file): Add block to
        lookup_symbol_global call.
        * Makefile.in (solist_h): Add dependency on symtab header.
        (symtab.o): Add dependency on solist header.
        * solib.c (solib_global_lookup): New function.
        * solib-svr4.c (scan_dyntag): Likewise.
        (elf_locate_base): Call helper routine scan_dyntag.
        (elf_lookup_lib_symbol): New function.
        (_initialize_svr4_solib): Add elf_lookup_lib_symbol to svr4_so_ops.
        * solist.h (symtab.h): New include.
        (struct target_so_ops): New member lookup_lib_global_symbol.
        (solib_global_lookup): New prototype.
        * symtab.c: New include solist.h.
        (lookup_objfile_from_block): New function.
        (lookup_global_symbol_from_objfile): New function.
        (basic_lookup_symbol_nonlocal): Add block to lookup_symbol_global call.
        (lookup_symbol_global): Call library-specific lookup procedure.
        * symtab.h (lookup_global_symbol_from_objfile): New prototype.

        * NEWS: Document framework.

2007-07-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * target-descriptions.c (tdesc_create_reg): Do not set reg->type
        to NULL.

        * cli/cli-script.c (build_command_line): Update NULL check.

2007-07-02  Michael Snyder  <msnyder@access-company.com>

        * p-exp.y (yylex): Memory leak, 'uptokstart' must be freed (Coverity).

2007-07-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (XMLFILES): Add library-list.dtd.
        (ALLDEPFILES): Add solib-target.o.
        (solib-target.o): New rule.
        * remote.c (PACKET_qXfer_libraries): New constant.
        (remote_protocol_features): Add qXfer:libraries:read.
        (remote_wait): Recognize library stop replies.
        (remote_async_wait): Likewise.  Fix typo.
        (remote_xfer_partial): Handle TARGET_OBJECT_LIBRARIES.
        (init_remote_async_ops): Fix typo.
        (_initialize_remote): Register "set remote library-info-packet".
        * solib-som.c (som_current_sos): Set addr_low and addr_high.
        * solib-target.c: New file.
        * solib.c (solib_map_sections): Use addr_low and addr_high instead
        of textsection.
        (info_sharedlibrary_command): Likewise.
        (solib_add_library, solib_remove_library): New.
        * solist.h (struct so_list): Replace textsection with addr_low and
        addr_high.
        * target.h (enum target_object): Add TARGET_OBJECT_LIBRARIES.
        * NEWS: Describe new qXfer:libraries:read and shared library
        event support.
        * features/library-list.dtd: New.

2007-07-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * infrun.c (inferior_ignoring_startup_exec_events): Delete.
        (start_remote): Use STOP_QUIETLY_REMOTE.
        (handle_inferior_event): Do not condition TARGET_WAITKIND_LOADED
        support on a SOLIB_ADD definition.  Update breakpoints_inserted.
        Update to match shared library event breakpoint support.  Only
        resume if appropriate.  Handle STOP_QUIETLY_REMOTE.
        (normal_stop): Handle TARGET_WAITKIND_LOADED.
        * fork-child.c (startup_inferior): Do not set
        inferior_ignoring_startup_exec_events
        * inferior.h (inferior_ignoring_startup_exec_events): Delete
        declaration.
        (enum stop_kind): Improve documentation.  Add STOP_QUIETLY_REMOTE.

2007-07-02  Markus Deuling  <deuling@de.ibm.com>

        * breakpoint.c (insert_bp_location): Remove dead code
        (DISABLE_UNSETTABLE_BREAK).
        (disable_breakpoints_in_shlibs)
        (disable_breakpoints_in_unloaded_shlib): Likewise (comment).

2007-07-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * breakpoint.c (reattach_breakpoints): Do not use remove_breakpoint.
        Call insert_bp_location.

2007-07-01  H.J. Lu  <hongjiu.lu@intel.com>

        * core-regset.c (fetch_core_registers): Work around gcc 3.4
        alias warning bug.

2007-07-01  Daniel Jacobowitz  <dan@codesourcery.com>

        * minsyms.c (lookup_minimal_symbol_by_pc_section): Search fewer
        objfiles.

2007-07-01  Daniel Jacobowitz  <dan@codesourcery.com>

        * top.c (gdb_readline_wrapper_line): Call rl_callback_handler_remove.
        (struct gdb_readline_wrapper_cleanup): Remove prompt_orig.
        (gdb_readline_wrapper_cleanup): Do not reset the prompt.
        (gdb_readline_wrapper): Do not save the prompt.  Pass our prompt
        to display_gdb_prompt.

2007-07-01  Daniel Jacobowitz  <dan@codesourcery.com>

        PR symtab/2161
        * target.c (memory_xfer_partial): Do not continue past targets with
        all memory.

2007-06-30  Andreas Schwab  <schwab@suse.de>

        * m68k-tdep.c (m68k_ps_type): New.
        (m68k_init_types): New.
        (m68k_register_type): Use m68k_ps_type for PS register.
        (_initialize_m68k_tdep): Call m68k_init_types.

        * m68k-tdep.c (m68k_gdbarch_init): Don't infer coldfire flavour
        from the generic m68k arch.

2007-06-28  Michael Snyder  <msnyder@access-company.com>

        * m2-typeprint.c (m2_print_type): Move pointer ref after null test
        (Coverity).

        * linux-thread-db.c (thread_db_get_thread_local_address): Add
        gdb_assert before using return value of find_thread_pid (Coverity).

        * source.c (unset_substitute_path_command): Plug leak (Coverity).

        * cli/cli-script.c (build_command_line): Add null pointer guard 
        (Coverity).
        
2007-06-27  Daniel Jacobowitz  <dan@codesourcery.com>

        * linux-thread-db.c (thread_db_attach): Delete.
        (thread_db_detach): Typo fix.  Call target_mourn_inferior
        instead of fixing up proc_handle.
        (have_threads_callback, have_threads): New functions.
        (thread_db_wait): Remove dead proc_handle.pid check.  Only
        translate PTIDs if we have registered threads.  Check for new
        threads if we have none.
        (thread_db_create_inferior, thread_db_post_startup_inferior): Delete.
        (find_new_threads_callback): Only enable event reporting if TID == 0.
        (same_ptid_callback): New.
        (thread_db_get_thread_local_address): Check for new threads.
        (init_thread_db_ops): Don't set to_attach, to_create_inferior,
        or to_post_startup_inferior.

2007-06-22  Ulrich Weigand  <uweigand@de.ibm.com>

        * infrun.c (adjust_pc_after_break): Do not assume software single-step
        is always active if SOFTWARE_SINGLE_STEP_P is true.
        (resume): Use gdbarch_software_single_step[_p] instead of
        SOFTWARE_SINGLE_STEP[_P].
        (handle_inferior_event): Do not check for SOFTWARE_SINGLE_STEP_P.

        * gdbarch.sh (software_single_step): Remove target macro.
        * gdbarch.h, gdbarch.c: Regenerate.

2007-06-22  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (gdbarch_swap_ftype, deprecated_register_gdbarch_swap,
        DEPRECATED_REGISTER_GDBARCH_SWAP): Remove.
        (struct gdbarch_swap, struct gdbarch_swap_registration, 
        struct gdbarch_swap_registry, gdbarch_swap_registry,
        current_gdbarch_swap_init_hack, current_gdbarch_swap_out_hack,
        current_gdbarch_swap_in_hack): Remove.
        (find_arch_by_info): Do not call current_gdbarch_swap_init_hack.
        (gdbarch_find_by_info): Do not call current_gdbarch_swap_in_hack
        and current_gdbarch_swap_out_hack, update current_gdbarch directly.
        (deprecated_current_gdbarch_select_hack): Likewise.
        * gdbarch.h, gdbarch.c: Regenerate.

2007-06-22  Ulrich Weigand  <uweigand@de.ibm.com>

        * infrun.c (clear_proceed_status): Clean up stop_registers.
        (normal_stop): Allocate regcache for stop_registers.
        (struct inferior_status): Remove stop_registers member.
        (save_inferior_status): Do not save stop_registers.
        (restore_inferior_status): Do not restore stop_registers.
        (discard_inferior_status): Do not discard stop_registers.
        (build_infrun): Remove.
        (_initialize_infrun): Do not swap stop_registers.

2007-06-22  Ulrich Weigand  <uweigand@de.ibm.com>

        * remote.c (remote_address_masked): If remote_address_size is zero,
        default to target address size.
        (build_remote_gdbarch_data): Remove.
        (_initialize_remote): Do not swap remote_address_size.

2007-06-22  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (builtin_type_true_char, builtin_type_void,
        builtin_type_char, builtin_type_short, builtin_type_int,
        builtin_type_long, builtin_type_signed_char,
        builtin_type_unsigned_char, builtin_type_unsigned_short,
        builtin_type_unsigned_int, builtin_type_unsigned_long,
        builtin_type_float, builtin_type_double, builtin_type_long_double,
        builtin_type_complex, builtin_type_double_complex, builtin_type_string,
        builtin_type_bool, builtin_type_long_long,
        builtin_type_unsigned_long_long, builtin_type_void_data_ptr,
        builtin_type_void_func_ptr, builtin_type_CORE_ADDR): Replace global
        variable declaration with compatibility macro.
        * gdbtypes.c (builtin_type_true_char, builtin_type_void,
        builtin_type_char, builtin_type_short, builtin_type_int,
        builtin_type_long, builtin_type_signed_char,
        builtin_type_unsigned_char, builtin_type_unsigned_short,
        builtin_type_unsigned_int, builtin_type_unsigned_long,
        builtin_type_float, builtin_type_double, builtin_type_long_double,
        builtin_type_complex, builtin_type_double_complex, builtin_type_string,
        builtin_type_bool, builtin_type_long_long,
        builtin_type_unsigned_long_long, builtin_type_void_data_ptr,
        builtin_type_void_func_ptr, builtin_type_CORE_ADDR): Remove.
        (build_gdbtypes): Remove.
        (_initialize_gdbtypes): Do not call build_gdbtypes, move installing
        opaque-type-resolution command here.   Do not call 
        deprecated_register_gdbarch_swap.

2007-06-22  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (struct builtin_type): New members nodebug_text_symbol,
        nodebug_data_symbol, nodebug_unknown_symbol, and nodebug_tls_symbol.
        * gdbtypes.c (gdbtypes_post_init): Initialize nodebug_ default types.

        * parse.c (msym_text_symbol_type, msym_data_symbol_type): Remove.
        (msym_unknown_symbol_type, msym_tls_symbol_type): Remove.
        (write_exp_msymbol): Use builtin nodebug_ types instead of them.
        (build_parse): Remove.
        (_initialize_parse): Do not call build_parse.  Do not register
        msym_ types for gdbarch-swapping.

        * dwarf2read.c (new_symbol): Use default nodebug_data_symbol type
        instead of creating private type.

        * xcoffread.c (func_symbol_type, var_symbol_type): Remove.
        (_initialize_xcoffread): Do not initialized them.
        (process_xcoff_symbol): Use builtin nodebug_ types instead of them.

        * mdebugread.c (nodebug_func_symbol_type): Remove.
        (nodebug_var_symbol_type): Remove.
        (_initialize_mdebugread): Do not initialize them.
        (parse_symbol): Use builtin nodebug_ type instead of them.
        (parse_procedure): Likewise.

2007-06-21  Chris Dearman  <chris@mips.com>

        * printcmd.c (do_one_display): If display/i, start with an initial
        line feed to avoid bad layout if there is a branch delay slot.

2007-06-21  Nigel Stephens  <nigel@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * disasm.c (gdb_print_insn): Return the number of branch delay
        slot instructions too.
        * disasm.h (gdb_print_insn): Update prototype.
        * printcmd.c (branch_delay_insns): New variable to record the
        number of delay slot instructions after disassembling a branch.
        (print_formatted): Record the number of branch delay slot
        instructions.
        (do_examine): When disassembling, if the last instruction
        disassembled has any branch delay slots, then bump the count so
        that they get disassembled too.
        * tui/tui-disasm.c (tui_disassemble): Update the call to
        gdb_print_insn().
        * NEWS: Document the new behaviour.

2007-06-21  Andreas Schwab  <schwab@suse.de>

        * regcache.c (write_pc_pid): Restore missing else.

2007-06-20  Ulrich Weigand  <uweigand@de.ibm.com>

        * regcache.c (regcache_print): Use get_current_regcache ()
        instead of current_regcache.

2007-06-20  H.J. Lu  <hongjiu.lu@intel.com>

        PR 4606
        * gcore.c (gcore_command): Use bfd_make_section_anyway_with_flags
        instead of bfd_make_section_anyway.
        (gcore_create_callback): Likewise.  Also set SEC_NEVER_LOAD
        when clearing SEC_LOAD.

2007-06-19  Joseph Myers  <joseph@codesourcery.com>

        * arm-tdep.c (arm_push_dummy_call): Correct padding of partial
        registers for big-endian.

2007-06-19  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_PRINT_INSN): Replace by gdbarch_print_insn.
        * disasm.c (dump_insns, gdb_print_insn): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-19  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (BELIEVE_PCC_PROMOTION): Replace by
        gdbarch_believe_pcc_promotion.
        * stabsread.c (define_symbol): Likewise.
        Remove unnecessary definition.
        * coffread.c (process_coff_symbol): Remove unnecessary code.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-19  Daniel Jacobowitz  <dan@codesourcery.com>

        * configure.ac: Do not use ${objdir}.
        * configure: Regenerated.

2007-06-18  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (deprecated_register_size): Remove.
        * gdbarch.h, gdbarch.c: Regenerate.

        * arm-tdep.c (arm_push_dummy_call): Replace DEPRECATED_REGISTER_SIZE
        by INT_REGISTER_SIZE.
        (thumb_get_next_pc, arm_return_in_memory): Likewise.
        (arm_gdbarch_init): Do not call set_gdbarch_deprecated_register_size.
        * ia64-tdep.c (ia64_gdbarch_init): Do not call
        set_gdbarch_deprecated_register_size.

2007-06-18  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (DEPRECATED_FP_REGNUM): Replace by
        gdbarch_deprecated_fp_regnum.
        * std-regs.c (value_of_builtin_frame_fp_reg): Likewise.
        * remote-mips.c (mips_wait, mips_fetch_registers): Likewise.
        * arch-utils.c (legacy_virtual_frame_pointer): Likewise.
        * arch-utils.h (gdbarch_virtual_frame_pointer_ftype): Likewise
        (comment).
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-18  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (EXTRACT_RETURN_VALUE): Replace with
        gdbarch_extract_return_value.
        * value.c (generic_use_struct_convention): Likewise (comment).
        * ia64-tdep.c (ia64_use_struct_convention): Likewise (comment).
        * arch-utils.c (legacy_return_value): Likewise.
        * arch-utils.h (legacy_return_value): Likewise (comment).
        * gdbarch.sh (STORE_RETURN_VALUE): Replace by
        gdbarch_store_return_value.
        * stack.c (return_command): Likewise (comment).
        * arch-utils.h (legacy_return_value): Likewise (comment).
        * arch-utils.c (legacy_return_value): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-18  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (DEPRECATED_USE_STRUCT_CONVENTION): Replace by
        gdbarch_deprecated_use_struct_convention.
        * arch-utils.c (legacy_return_value): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-18  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (DEPRECATED_FUNCTION_START_OFFSET): Replace by
        gdbarch_deprecated_function_start_offset.
        * symtab.c (find_function_start_sal)skip_prologue_using_sal): Likewise.
        * linespec.c (minsym_found): Likewise.
        * infrun.c (handle_inferior_event): Likewise.
        * infcall.c (find_function_addr): Likewise.
        * cli/cli-cmds.c (disassemble_command): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-18  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (DEPRECATED_REG_STRUCT_HAS_ADDR): Replace by
        gdbarch_deprecated_reg_struct_has_addr.
        * infcall.c (call_function_by_hand): Likewise.
        (DEPRECATED_REG_STRUCT_HAS_ADDR_P): Replace by
        * gdbarch_deprecated_reg_struct_has_addr_p.
        * infcall.c (call_function_by_hand): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-18  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
        * sh-tdep.c (sh_extract_struct_value_address): Remove.
        (sh_gdbarch_init): Remove
        set_gdbarch_deprecated_extract_struct_value_address.
        * sh64-tdep.c (sh64_extract_struct_value_address): Remove.
        (sh64_gdbarch_init): Remove
        set_gdbarch_deprecated_extract_struct_value_address.
        * ia64-tdep.c (ia64_extract_struct_value_address): Remove.
        (ia64_gdbarch_init): Remove
        set_gdbarch_deprecated_extract_struct_value_address.
        * frv-tdep.c (frv_extract_struct_value_address): Remove.
        (frv_gdbarch_init): Remove
        set_gdbarch_deprecated_extract_struct_value_address.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-18  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (SP_REGNUM): Replace by gdbarch_sp_regnum.
        * v850-tdep.c (v850_unwind_sp): Likewise.
        * std-regs.c (value_of_builtin_frame_sp_reg): Likewise.
        * stack.c (frame_info): Likewise.
        * stabsread.c (define_symbol): Likewise.
        * sh-tdep.c (sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu)
        (sh_dwarf2_frame_init_reg, sh_frame_cache, sh_frame_prev_register)
        (sh_unwind_sp): Likewise.
        * sh64-tdep.c (sh64_push_dummy_call, sh64_frame_cache)
        (sh64_frame_prev_register, sh64_unwind_sp): Likewise.
        * rs6000-tdep.c (rs6000_push_dummy_call, rs6000_unwind_dummy_id)
        (rs6000_frame_cache): Likewise.
        * rs6000-nat.c (store_register): Likewise.
        * remote-mips.c (mips_wait): Likewise.
        * procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
        * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call)
        (ppc64_sysv_abi_push_dummy_call): Likewise.
        * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
        * ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise.
        * ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise.
        * ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise.
        * m32r-rom.c (m32r_supply_register): Likewise.
        * frame.c (frame_sp_unwind): Likewise.
        * mips-tdep.c (mips_insn16_frame_cache)
        (mips_insn32_frame_cache): Likewise (comment).
        * m68klinux-nat.c (supply_gregset): Likewise.
        * m68k-tdep.c (m68k_get_longjmp_target): Likewise.
        * ia64-tdep.c (ia64_frame_prev_register): Likewise.
        * i386-tdep.c (i386_get_longjmp_target): Likewise.
        * dwarf2-frame.c (dwarf2_frame_default_init_reg): Likewise.
        * cris-tdep.c (cris_regnums, cris_sigcontext_addr)
        (cris_sigtramp_frame_unwind_cache, cris_push_dummy_call)
        (cris_scan_prologue, crisv32_scan_prologue, cris_unwind_sp)
        (cris_register_type, crisv32_register_type)
        (cris_dwarf2_frame_init_reg): Likewise.
        * arch-utils.c (legacy_virtual_frame_pointer): Likewise.
        * amd64-tdep.c (amd64_frame_prev_register): Likewise.
        * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Likewise.
        * libunwind-frame.c (libunwind_frame_cache): Likewise.

        * gdbarch.sh (PC_REGNUM): Replace by gdbarch_pc_regnum.
        * regcache.c (read_pc_pid, generic_target_write_pc): Likewise.
        * xtensa-tdep.c (xtensa_register_type, xtensa_supply_gregset)
        (xtensa_unwind_pc, xtensa_frame_cache, xtensa_frame_prev_register)
        (xtensa_extract_return_value, xtensa_store_return_value): Likewise.
        * v850-tdep.c (v850_unwind_pc): Likewise.
        * stack.c (frame_info): Likewise.
        * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs)
        (sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs)
        (sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs)
        (sh_dwarf2_frame_init_reg, sh_frame_prev_register, sh_unwind_pc)
        (sh_dsp_show_regs): Likewise.
        * shnbsd-tdep.c (shnbsd_supply_gregset)
        (shnbsd_collect_gregset): Likewise.
        * shnbsd-nat.c (GETREGS_SUPPLIES): Likewise.
        * sh64-tdep.c (sh64_compact_reg_base_num, sh64_show_media_regs)
        (sh64_frame_prev_register, sh64_unwind_pc): Likewise.
        * rs6000-tdep.c (ppc_supply_gregset, ppc_collect_gregset)
        (6000_register_reggroup_p, rs6000_unwind_pc)
        (rs6000_frame_cache): Likewise.
        * rs6000-nat.c (regmap, rs6000_fetch_inferior_registers)
        (rs6000_store_inferior_registers): Likewise.
        * remote-mips.c (mips_wait, mips_load): Likewise.
        * procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
        * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
        * ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise.
        * ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise.
        * ppcnbsd-nat.c (getregs_supplies, ppcnbsd_supply_pcb): Likewise.
        * ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise.
        * ppc-linux-nat.c (ppc_register_u_addr, fetch_ppc_registers)
        (store_ppc_registers, fill_gregset): Likewise.
        * mips-tdep.c (mips_stub_frame_cache, mips_gdbarch_init): Likewise.
        * mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_fill_reg): Likewise.
        * mipsnbsd-nat.c (getregs_supplies): Likewise.
        * m68k-tdep.c (m68k_register_type, m68k_unwind_pc): Likewise.
        * m68klinux-nat.c (supply_gregset): Likewise.
        * irix5-nat.c (fill_gregset): Likewise.
        * i386-tdep.c (i386_unwind_pc): Likewise.
        * i386-linux-nat.c (i386_linux_resume): Likewise.
        * frame.c (get_prev_frame_1): Likewise.
        * dwarf2-frame.c (dwarf2_frame_default_init_reg): Likewise.
        * dbug-rom.c (dbug_supply_register): Likewise.
        * cris-tdep.c (cris_sigtramp_frame_unwind_cache, cris_scan_prologue)
        (crisv32_scan_prologue, cris_unwind_pc, cris_register_size)
        (cris_register_type, crisv32_register_type, crisv32_register_name)
        (cris_dwarf2_frame_init_reg, find_step_target)
        (cris_software_single_step, cris_supply_gregset)
        (cris_regnums): Likewise.
        * alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise.
        * aix-thread.c (special_register_p, supply_sprs64, supply_sprs32)
        (fill_sprs64, fill_sprs32, store_regs_user_thread): Likewise.
        * std-regs.c (value_of_builtin_frame_pc_reg): Likewise.
        * mips-linux-tdep.c (mips_linux_write_pc): Likewise.

        * gdbarch.sh (PS_REGNUM): Replace by gdbarch_ps_regnum.
        * dbug-rom.c (dbug_supply_register): Likewise.
        * xtensa-tdep.c (xtensa_supply_gregset, xtensa_frame_cache)
        (xtensa_frame_prev_register, xtensa_push_dummy_call): Likewise.
        * win32-nat.c (win32_resume): Likewise.
        * std-regs.c (value_of_builtin_frame_ps_reg): Likewise.
        * m68k-tdep.c (m68k_register_type): Likewise.
        * m68klinux-nat.c (supply_gregset): Likewise.

        * gdbarch.sh (FP0_REGNUM): Replace by gdbarch_fp0_regnum.
        * sh-tdep.c (sh_extract_return_value_fpu, sh_store_return_value_fpu)
        (sh2e_show_regs, sh2a_show_regs, sh3e_show_regs, sh4_show_regs)
        (sh_sh2a_register_type, sh_sh3e_register_type, sh_sh4_register_type)
        (fv_reg_base_num, dr_reg_base_num): Likewise.
        * sh64-tdep.c (sh64_fv_reg_base_num, sh64_dr_reg_base_num)
        (sh64_fpp_reg_base_num, sh64_compact_reg_base_num, sh64_push_dummy_call)
        (sh64_extract_return_value, sh64_store_return_value)
        (sh64_show_media_regs, sh64_show_compact_regs, sh64_register_type)
        (sh64_do_fp_register, sh64_media_print_registers_info): Likewise.
        * procfs.c (procfs_fetch_registers, procfs_store_registers)
        (invalidate_cache): Likewise.
        * ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise.
        * mipsnbsd-tdep.c (mipsnbsd_supply_fpreg)
        (mipsnbsd_fill_fpreg): Likewise.
        * mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
        (mipsnbsd_store_inferior_registers): Likewise.
        * mips-linux-tdep.c (mips_supply_fpregset, mips_fill_fpregset)
        (mips64_supply_fpregset, mips64_fill_fpregset): Likewise.
        * mips-linux-nat.c (mips64_linux_register_addr): Likewise.
        * m68k-tdep.c (m68k_register_type, m68k_convert_register_p): Likewise.
        * m68klinux-nat.c (getfpregs_supplies, supply_fpregset)
        (fill_fpregset): Likewise.
        * irix5-nat.c (supply_fpregset, fill_fpregset): Likewise.
        * i386-tdep.h (struct_return): Likewise (comment).
        * i386-nto-tdep.c (i386nto_register_area): Likewise.
        * go32-nat.c (fetch_register, go32_fetch_registers, store_register)
        (go32_store_registers): Likewise.
        * alpha-tdep.c (alpha_next_pc): Likewise.
        * alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise.
        * alphabsd-nat.c (alphabsd_fetch_inferior_registers)
        (alphabsd_store_inferior_registers): Likewise.
        * core-regset.c (fetch_core_registers): Likewise.
        * i386v4-nat.c (supply_fpregset, fill_fpregset): Likewise.

        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-18  Daniel Jacobowitz  <dan@codesourcery.com>

        * coffread.c (coff_sym_fns): Add default_symfile_segments.
        * dbxread.c (start_psymtab): Check HAVE_ELF.
        (aout_sym_fns): Likewise.
        * elfread.c (elf_symfile_segments): New.
        (elf_sym_fns): Add elf_symfile_segments.
        * mipsread.c (ecoff_sym_fns): Add default_symfile_segments.
        * remote.c (get_offsets): Use symfile_map_offsets_to_segments.
        Skip if there is no symfile_objfile.  Handle TextSeg and DataSeg.
        * somread.c (som_sym_fns): Use default_symfile_segments.
        * symfile.c (find_sym_fns): Take a BFD and return the sym_fns.
        (init_objfile_sect_indices): Call symfile_find_segment_sections.
        (default_symfile_segments): New function.
        (syms_from_objfile): Update call to find_sym_fns.
        (symfile_get_segment_data, free_symfile_segment_data): New.
        (symfile_map_offsets_to_segments): New.
        (symfile_find_segment_sections): New.
        * symfile.h (struct symfile_segment_data): New.
        (struct sym_fns): Add sym_segments.
        (default_symfile_segments, symfile_get_segment_data)
        (free_symfile_segment_data): New prototypes.
        (symfile_map_offsets_to_segments): Likewise.
        * xcoffread.c (xcoff_sym_fns): Add default_symfile_segments.
        * Makefile.in (COMMON_OBS): Remove elfread.o.
        (elf_internal_h): New.
        (elfread.o): Update.
        * configure.ac: Add elfread.o to COMMON_OBS if bfd/elf.o was
        compiled.
        * config.in, configure: Regenerated.
        * NEWS: Mention qOffsets changes.

2007-06-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (builtin_type_m2_char, builtin_type_m2_int,
        builtin_type_m2_card, builtin_type_m2_real, builtin_type_m2_bool):
        Replace global variable declaration with compatibility macro.
        (struct builtin_m2_type): New data type.
        (builtin_m2_type): Add prototype.
        * m2-lang.c (builtin_type_m2_char, builtin_type_m2_int,
        builtin_type_m2_card, builtin_type_m2_real, builtin_type_m2_bool):
        Remove global variables.
        (m2_language_arch_info): Use builtin_m2_type instead of variables.
        (build_m2_types): New function.
        (m2_type_data): New variable.
        (builtin_m2_type): New function.
        (_initialize_m2_language): Do not build data types.  Register
        m2_type_data per-gdbarch data.

2007-06-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (builtin_type_f_character, builtin_type_f_logical,
        builtin_type_f_logical_s1, builtin_type_f_logical_s2,
        builtin_type_f_integer, builtin_type_f_integer_s2, builtin_type_f_real,
        builtin_type_f_real_s8, builtin_type_f_real_s16,
        builtin_type_f_complex_s8, builtin_type_f_complex_s16,
        builtin_type_f_complex_s32, builtin_type_f_void): Replace global
        variable declaration with compatibility macro.
        (struct builtin_f_type): New data type.
        (builtin_f_type): Add prototype.
        * f-lang.c (builtin_type_f_character, builtin_type_f_logical,
        builtin_type_f_logical_s1, builtin_type_f_logical_s2,
        builtin_type_f_integer, builtin_type_f_integer_s2, builtin_type_f_real,
        builtin_type_f_real_s8, builtin_type_f_real_s16,
        builtin_type_f_complex_s8, builtin_type_f_complex_s16,
        builtin_type_f_complex_s32, builtin_type_f_void): Remove variables.
        (f_language_arch_info): Use builtin_f_type instead of variables.
        (build_fortran_types): Build builtin_f_type structure instead of
        setting global type variables.
        (f_type_data): New variable.
        (builtin_f_type): New function.
        (_initialize_f_language): Do not call build_fortran_types.  Do not
        swap global type variables.  Register f_type_data per-gdbarch data.

2007-06-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * f-lang.c (_initialize_f_language): Do not initialize or
        swap builtin_type_string.

2007-06-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * std-regs.c (builtin_type_frame_reg, build_builtin_type_frame_reg,
        value_of_builtin_frame_reg): Remove.
        (_initialize_frame_reg): Do not swap builtin_type_frame_reg.  Remove
        inactive call to value_of_builtin_frame_reg.

2007-06-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (bfd_vma_bit): Remove.
        * gdbarch.c, gdbarch.h: Regenerate.

        * gdbtypes.h (builtin_bfd_vma_type): Remove.
        * gdbtypes.h (builtin_bfd_vma_type): Remove.
        (build_gdbtypes): Do not initialize it.
        (_initialize_gdbtypes): Do not swap it.

2007-06-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.c (builtin_type_v2_double, builtin_type_v4_float, 
        builtin_type_v2_int64, builtin_type_v4_int32, builtin_type_v8_int16,
        builtin_type_v16_int8, builtin_type_v2_float, builtin_type_v2_int32,
        builtin_type_v4_int16, builtin_type_v8_int8, builtin_type_v4sf,
        builtin_type_v4si, builtin_type_v16qi, builtin_type_v8qi, 
        builtin_type_v8hi, builtin_type_v4hi, builtin_type_v2si,
        builtin_type_vec64, builtin_type_vec128): Remove.
        (init_simd_type): Remove.
        (init_vector_type): Make global.
        (build_builtin_type_vec64, build_builtin_type_vec128): Remove.
        (build_gdbtypes): Do not build vector types.
        (_initialize_gdbtypes): Do not swap vector types.
        * gdbtypes.h (builtin_type_v2_double, builtin_type_v4_float, 
        builtin_type_v2_int64, builtin_type_v4_int32, builtin_type_v8_int16,
        builtin_type_v16_int8, builtin_type_v2_float, builtin_type_v2_int32,
        builtin_type_v4_int16, builtin_type_v8_int8, builtin_type_v4sf,
        builtin_type_v4si, builtin_type_v16qi, builtin_type_v8qi, 
        builtin_type_v8hi, builtin_type_v4hi, builtin_type_v2si,
        builtin_type_vec64, builtin_type_vec128): Remove declarations.
        (init_vector_type): Add prototype.

        * i386-tdep.h (struct gdbarch_tdep): Add i386_mmx_type and
        i386_sse_type members.
        (i386_mmx_type, i386_sse_type): Change from variables to functions.
        * i386-tdep.c (i386_mmx_type, i386_sse_type): Remove variables.
        (i386_init_types): Do not build vector types.
        (i386_mmx_type, i386_sse_type): New functions.
        (i386_register_type): Call them instead of using global variables.
        (i386_gdbarch_init): Use XCALLOC to allocate tdep structure.
        * amd64-tdep.c (amd64_register_type): Call i386_sse_type instead
        of using global variable.

        * rs6000-tdep.h (struct gdbarch_tdep): Add ppc_builtin_type_vec64
        and ppc_builtin_type_vec128 members.
        * rs6000-tdep.c (rs6000_builtin_type_vec64): New function.
        (rs6000_builtin_type_vec128): Likewise.
        (rs6000_register_type): Call them instead of using builtin_type_vec64
        and builtin_type_vec128.
        (rs6000_gdbarch_init): Use XCALLOC to allocate tdep structure.

        * spu-tdep.c (struct gdbarch_tdep): New data type.
        (spu_builtin_type_vec128): Remove variable.
        (spu_builtin_type_vec128): New function.
        (spu_register_type): Call it instead of using global variable.
        (spu_gdbarch_init): Allocate tdep structure.
        (spu_init_vector_type): Remove function.
        (_initialize_spu_tdep): Do not call it.

2007-06-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * amd64-tdep.c (struct amd64_register_info): Remove.
        (amd64_register_info): Remove.
        (amd64_register_names): New static variable.
        (AMD64_NUM_REGS): Use amd64_register_names instead of
        amd64_register_info.
        (amd64_register_name): Likewise.
        (amd64_register_type): Do not refer to amd64_register_info.

        * s390-tdep.c (struct s390_register_info): Remove.
        (s390_register_info): Remove.
        (s390_register_name): Do not refer to s390_register_info.
        (s390_register_type): Likewise.

        * sparc64-tdep.c (struct sparc64_register_info): Remove.
        (sparc64_register_info, sparc64_pseudo_register_info): Remove.
        (sparc64_register_names, sparc64_pseudo_register_names): New.
        (SPARC64_NUM_REGS, SPARC64_NUM_PSEUDO_REGS): Use
        sparc64_register_names and sparc64_pseudo_register_names instead of
        sparc64_register_info and sparc64_pseudo_register_info.
        (sparc64_register_name): Likewise.
        (sparc64_register_type): Do not refer to sparc64_register_info
        and sparc64_pseudo_register_info.

2007-06-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * c-lang.c (cplus_builtin_types): Remove.
        (enum cplus_primitive_types): New data type.
        (cplus_language_arch_info): New function.
        (cplus_language_defn): Set la_language_arch_info member.  Do not set
        la_builtin_type_vector and string_char_type members.

        * f-lang.c (f_builtin_types): Remove.
        (enum f_primitive_types): New data type.
        (f_language_arch_info): New function.
        (f_language_de): Set la_language_arch_info member.  Do not set
        la_builtin_type_vector and string_char_type members.

        * m2-lang.c (m2_builtin_types): Remove.
        (enum m2_primitive_types): New data type.
        (m2_language_arch_info): New function.
        (m2_language_defn): Set la_language_arch_info member.  Do not set
        la_builtin_type_vector and string_char_type members.

        * objc-lang.c (objc_builtin_types): Remove.
        (objc_language): Set la_language_arch_info member.  Do not set
        la_builtin_type_vector and string_char_type members.

        * p-lang.c (pascal_builtin_types): Remove.
        (enum pascal_primitive_types): New data type.
        (pascal_language_arch_info): New function.
        (pascal_language_defn): Set la_language_arch_info member.  Do not set
        la_builtin_type_vector and string_char_type members.

2007-06-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * regcache.c (struct regcache): Add ptid_t member.
        (regcache_xmalloc): Initialize it.
        (regcache_cpy_no_passthrough): Do not refer to current_regcache.
        (regcache_dup): Likewise.
        (regcache_dup_no_passthrough): Likewise.
        (current_regcache): Make static.
        (registers_ptid): Remove variable.
        (get_thread_regcache): New function.
        (get_current_regcache): New function.
        (registers_changed): Implement by freeing current regcache.
        (regcache_raw_read): Do not refer to current_regcache.  Set 
        inferior_ptid to regcache->ptid while calling target routines.
        (regcache_raw_write): Likewise.
        (regcache_raw_supply): Do not refer to current_regcache.
        (read_pc_pid): Use thread regcache.  Do not modify inferior_ptid.
        (write_pc_pid): Likewise.
        (build_regcache): Remove.
        (_initialize_regcache): Do not call DEPRECATED_REGISTER_GDBARCH_SWAP
        or deprecated_register_gdbarch_swap.  Do not initialize
        registers_ptid.
        * regcache.h (get_current_regcache): Add prototype.
        (get_thread_regcache): Likewise.
        (current_regcache): Remove declaration.

        * corelow.c (core_open): Replace current_regcache by
        get_current_regcache ().
        * frame.c (frame_pop): Likewise.
        (put_frame_register): Likewise.
        (get_current_frame, create_new_frame): Likewise.
        * mi/mi-main.c (mi_cmd_data_write_register_values): Likewise.
        * stack.c (return_command): Likewise.
        * infcall.c (call_function_by_hand): Likewise.
        * infrun.c (resume): Likewise.
        (save_inferior_status, restore_inferior_status): Likewise.
        * linux-fork.c (fork_load_infrun_state): Likewise.
        (fork_save_infrun_state): Likewise.
        * win32-nat.c (win32_resume): Likewise.
        * i386fbsd-nat.c (i386fbsd_resume): Likewise.
        * monitor.c (monitor_wait): Likewise.
        * remote.c (remote_wait): Likewise.
        * remote-mips.c (mips_wait): Likewise.

        * bsd-kvm.c (bsd_kvm_open): Likewise
        (bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): Likewise.
        * fbsd-nat.c (fbsd_make_corefile_notes): Likewise.
        * i386-linux-nat.c (i386_linux_resume): Likewise.
        * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
        (ia64_linux_stopped_data_address): Likewise.

        * frv-tdep.c (frv_fdpic_loadmap_addresses): Likewise.
        * m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
        * mep-tdep.c (current_me_module, current_options): Likewise.
        * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Likewise.

        * linux-nat.c (linux_nat_do_thread_registers): Use thread
        regcache instead of current_regcache.  Call target_fetch_registers.
        (linux_nat_corefile_thread_callback): Update call site.
        (linux_nat_do_registers): Likewise.
        * procfs.c (procfs_do_thread_registers): Use thread regcache instead
        of current_regcache.
        (procfs_make_note_section): Likewise.
        * proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
        (ps_lgetfpregs, ps_lsetfpregs): Likewise.
        * sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
        (ps_lgetfpregs, ps_lsetfpregs): Likewise.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * regcache.c (read_register, read_register_pid): Remove.
        (write_register, write_register_pid): Likewise.
        * regcache.h (read_register, read_register_pid): Remove prototype.
        (write_register, write_register_pid): Likewise.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (read_pc): Add REGCACHE argument.  Remove PTID argument.
        (write_pc): Likewise.  Remove default implementation, add predicate.
        * gdbarch.c, gdbarch.h: Regenerate.
        * regcache.c (read_pc_pid): Use current regcache instead of calling
        read_register_pid.
        (write_pc_pid): Check gdbarch_write_pc predicate, implement default
        case inline.
        (generic_target_write_pc): Remove.
        * inferior.h (generic_target_write_pc): Remove.
        * frv-tdep.c (frv_gdbarch_init): Do not install it.
        * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
        * rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
        * sh64-tdep.c (sh64_gdbarch_init): Likewise.
        * sh-tdep.c (sh_gdbarch_init): Likewise.
        * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.

        * avr-tdep.c (avr_read_pc): Add REGCACHE argument.  Remove PTID
        argument.  Use REGCACHE instead of calling read_register_pid.
        * hppa-hpux-tdep.c (hppa_hpux_read_pc): Likewise.
        * hppa-tdep.c (hppa_read_pc): Likewise.
        * hppa-tdep.h (hppa_read_pc): Likewise.
        * ia64-tdep.c (ia64_read_pc): Likewise.
        * m32r-tdep.c (m32r_read_pc): Likewise.
        * mep-tdep.c (mep_read_pc): Likewise.
        * mn10300-tdep.c (mn10300_read_pc): Likewise.
        * spu-tdep.c (spu_read_pc): Likewise.

        * arm-tdep.c (arm_write_pc): Add REGCACHE argument.  Remove PTID
        argument.  Use REGCACHE instead of calling write_register_pid.
        * avr-tdep.c (avr_write_pc): Likewise.
        * hppa-hpux-tdep.c (hppa_hpux_write_pc): Likewise.
        * hppa-tdep.c (hppa_write_pc): Likewise.
        * hppa-tdep.h (hppa_write_pc): Likewise.
        * i386-linux-tdep.c (i386_linux_write_pc): Likewise.
        * amd64-linux-tdep.c (amd64_linux_write_pc): Likewise.
        * ia64-linux-tdep.c (ia64_linux_write_pc): Likewise.
        * ia64-tdep.c (ia64_write_pc): Likewise.
        * ia64-tdep.h (ia64_write_pc): Likewise.
        * m32r-tdep.c (m32r_write_pc): Likewise.
        * m88k-tdep.c (m88k_write_pc): Likewise.
        * mep-tdep.c (mep_write_pc): Likewise.
        * mips-tdep.c (mips_write_pc): Likewise.
        * mips-linux-tdep.c (mips_linux_write_pc): Likewise.
        * mn10300-tdep.c (mn10300_write_pc): Likewise.
        * sparc-tdep.c (sparc_write_pc): Likewise.
        * spu-tdep.c (spu_write_pc): Likewise.

        * mips-tdep.c (read_signed_register): Remove.
        (read_signed_register_pid): Likewise.
        (mips_read_pc): Add REGCACHE argument.  Remove PTID argument.
        Use REGCACHE instead of calling read_signed_register_pid.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (push_dummy_code): Add REGCACHE argument.
        * gdbarch.c, gdbarch.h: Regenerate.
        * infcall.c (generic_push_dummy_code): Add REGCACHE argument.
        (push_dummy_code): Likewise.  Pass it to callee.
        (call_function_by_hand): Pass current regcache to push_dummy_code.

        * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Add REGCACHE
        argument.  Use it instead of current_regcache.

        * cris-tdep.c (cris_push_dummy_code): Add REGCACHE argument.
        * sparc-tdep.c (sparc32_push_dummy_code): Likewise.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (get_longjmp_target): Add FRAME argument.
        * gdbarch.c, gdbarch.h: Regenerate.
        * infrun.c (handle_inferior_event): Pass current frame to
        gdbarch_get_longjmp_target.

        * alpha-tdep.c (alpha_get_longjmp_target): Add FRAME argument.
        Read registers from FRAME instead of using read_register.
        Use get_frame_arch instead of current_gdbarch.
        * arm-tdep.c (arm_get_longjmp_target): Likewise.
        * i386-tdep.c (i386_get_longjmp_target): Likewise.
        * m68k-tdep.c (m68k_get_longjmp_target): Likewise.
        * mips-linux-tdep.c (mips_linux_get_longjmp_target): Likewise.
        (mips64_linux_get_longjmp_target): Likewise.
        * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (skip_trampoline_code): Add FRAME argument.
        * gdbarch.c, gdbarch.h: Regenerate.
        * arch-utils.c (generic_skip_trampoline_code): Add FRAME argument.
        * arch-utils.h (generic_skip_trampoline_code): Likewise.
        * infrun.c (handle_inferior_event): Pass current frame to
        gdbarch_skip_trampoline_code and skip_language_trampoline.

        * language.c (unk_lang_trampoline): Add FRAME argument.
        (skip_language_trampoline): Add FRAME argument.  Pass it to
        skip_trampoline callback.
        * language.h: Add forward declaration of struct frame_info.
        (struct language_defn): Add FRAME argument to skip_trampoline.
        (skip_language_trampoline): Add FRAME argument.
        * cp-abi.c (cplus_skip_trampoline): Add FRAME argument.  Pass it
        to skip_trampoline callback.
        * cp-abi.h: Add forward declaration of struct frame_info.
        (cplus_skip_trampoline): Add FRAME argument.
        (struct cp_abi_ops): Add FRAME argument to skip_trampoline callback.
        * gnu-v3-abi.c (gnuv3_skip_trampoline): Add FRAME argument.  Pass it
        to gdbarch_skip_trampoline_code.
        * objc-lang.c (objc_skip_trampoline): Add FRAME argument.  Pass it
        to gdbarch_skip_trampoline_code.

        * minsyms.c (find_solib_trampoline_target): Add FRAME argument.
        * symtab.h (find_solib_trampoline_target): Likewise.
        * obsd-tdep.c (obsd_skip_solib_resolver): Pass current frame to
        find_solib_trampoline_target.

        * arm-tdep.c (arm_skip_stub): Add FRAME argument.  Read registers
        from FRAME instead of calling read_register.

        * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Add FRAME
        argument.  Read registers from FRAME instead of using read_register.
        * hppa-tdep.c (hppa_skip_trampoline_code): Likewise.
        * hppa-tdep.h (hppa_skip_trampoline_code): Add FRAME argument.

        * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Add FRAME
        argument.

        * m32c-tdep.c (m32c_skip_trampoline_code): Add FRAME argument.

        * mips-tdep.c (mips_skip_trampoline_code): Add FRAME argument.  Read
        registers from FRAME instead of using read_signed_register.

        * ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Add FRAME
        argument.
        (ppc64_standard_linkage_target): Likewise.  Read registers from FRAME
        instead of using read_register.
        (ppc64_skip_trampoline_code): Add FRAME argument.  Pass it to
        ppc64_standard_linkage_target.
        * rs6000-tdep.c (rs6000_skip_trampoline_code): Add FRAME argument.
        Pass it to find_solib_trampoline_target.  Read registers from FRAME
        instead of using read_register.

        * xstormy16-tdep.c (xstormy16_skip_trampoline_code): Add FRAME
        argument.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (software_single_step): Replace REGCACHE argument by
        FRAME argument.
        * gdbarch.c, gdbarch.h: Regenerate.
        * infrun.c (resume): Pass current frame to SOFTWARE_SINGLE_STEP.

        * alpha-tdep.c (alpha_next_pc): Add FRAME argument.  Retrieve
        registers from FRAME instead of using read_register.
        (alpha_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
        to alpha_next_pc.  Use get_frame_pc instead of read_pc.
        * alpha-tdep.h (alpha_software_single_step): Replace REGCACHE
        argument by FRAME.

        * arm-tdep.c (shifted_reg_val): Add FRAME argument.  Read registers
        from FRAME instead of using read_register.
        (thumb_get_next_pc): Likewise.
        (arm_get_next_pc): Likewise.
        (arm_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
        to arm_get_next_pc.  Use get_frame_pc instead of read_register.
        * arm-tdep.h (arm_software_single_step): Replace REGCACHE
        argument by FRAME.

        * cris-tdep.c (find_step_target): Add FRAME argument.  Read registers
        from FRAME instead of using read_register.
        (cris_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
        to find_step_target.

        * mips-tdep.c (mips32_next_pc): Add FRAME argument.  Read registers
        from FRAME instead of using read_register / read_signed_register.
        (extended_mips16_next_pc): Likewise.
        (mips16_next_pc): Likewise.
        (mips_next_pc): Likewise.
        (mips_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
        to mips_next_pc.  Use get_frame_pc instead of read_pc.
        * mips-tdep.h (mips_software_single_step): Replace REGCACHE
        argument by FRAME.

        * rs6000-tdep.c (branch_dest): Add FRAME argument.  Use it instead
        of current frame.  Read registers from FRAME.
        (deal_with_atomic_sequence): Add FRAME argument.  Pass it to
        branch_dest.  Use get_frame_pc instead of read_pc.
        (rs6000_software_single_step): Likewise.
        (bl_to_blrl_insn_p): Do not call branch_dest.
        * rs6000-tdep.h (rs6000_software_single_step): Replace REGCACHE
        argument by FRAME.

        * sparc64-linux-tdep.c (sparc64_linux_step_trap): Add FRAME argument.
        Read registers from FRAME instead of current regcache.
        * sparc-linux-tdep.c (sparc32_linux_step_trap): Likewise.
        * sparcnbsd-tdep.c (sparcnbsd_step_trap): Likewise.
        * sparc-tdep.c (sparc_address_from_register): Remove.
        (sparc_analyze_control_transfer): Pass FRAME argument instead of
        GDBARCH.  Pass FRAME to step_trap callback.
        (sparc_step_trap): Add FRAME argument.
        (space_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
        to sparc_analyze_control_transfer.  Read registers from FRAME instead
        of calling sparc_address_from_register.
        * sparc-tdep.h (struct gdbarch_tdep): Add FRAME argument to
        step_trap callback.
        (sparc_address_from_register): Remove prototype.
        (sparc_software_single_step): Replace REGCACHE argument by FRAME.
        (sparcnbsd_step_trap): Add FRAME argument.

        * spu-tdep.c (spu_software_single_step): Replace REGCACHE argument
        by FRAME.  Read registers from FRAME instead of REGCACHE.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * arm-tdep.c (arm_print_float_info): Use register value from FRAME
        instead of calling read_register.

        * avr-tdep.c (avr_push_dummy_call): Write to REGCACHE instead of
        calling write_register.

        * hppa-tdep.c (hppa32_push_dummy_call): Write to REGCACHE instead of
        calling write_register.

        * ia64-tdep.c (find_func_descr): Add REGCACHE parameter.  Use it
        instead of calling read_register.
        (ia64_push_dummy_call): Update call to find_func_descr.  Use REGCACHE
        instead of calling read_register and write_register.

        * m32r-tdep.c (m32r_linux_supply_gregset): Use REGCACHE parameter
        instead of current_regcache.

        * mn10300-tdep.c (mn10300_push_dummy_call): Write to REGCACHE instead
        of calling write_register.
        * mn10300-linux-tdep.c (am33_supply_fpregset_method): Use REGCACHE
        parameter instead of current_regcache.

        * mips-tdep.c (mips2_fp_compat): Add FRAME parameter.  Use it 
        instead of calling read_register.
        (mips_read_fp_register_double, mips_print_fp_register): Update calls.
        (mips_eabi_push_dummy_call): Use REGCACHE instead of write_register.
        (mips_n32n64_push_dummy_call): Likewise.
        (mips_o32_push_dummy_call): Likewise.
        (mips_o64_push_dummy_call): Likewise.

        * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Use REGCACHE
        parameter instead of current_regcache.

        * xtensa-tdep.c (xtensa_register_write_masked): Add REGCACHE parameter.
        Use it instead of read_register and write_register.
        (xtensa_register_read_masked): Likewise.
        (xtensa_pseudo_register_read): Update call.
        (xtensa_pseudo_register_write): Likewise.
        (xtensa_frame_cache): Use register values unwound from NEXT_FRAME
        instead of calling read_register.
        (xtensa_push_dummy_call): Update comment.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * mips-tdep.c (mips16_scan_prologue): Replace read_next_frame_reg
        by frame_unwind_register_signed calls.
        (mips32_scan_prologue): Likewise.  Skip analysis of alloca stack
        frame allocations when called with NULL NEXT_FRAME parameter.
        (read_next_frame_reg): Remove.

        * sh-tdep.c (sh_analyze_prologue): Add FPSCR parameter.  Use it
        instead of reading the FPSCR register.
        (sh_frame_cache): Pass unwound FPSCR register value to
        sh_analyze_prologue.
        (sh_skip_prologue): Pass dummy FPSCR value to sh_analyze_prologue.

        * v850-tdep.c (v850_analyze_prologue): Add CTBP parameter.  Use it
        instead of reading the CTBP register.
        (v850_frame_cache): Pass unwound CTBP register value to
        v850_analyze_prologue.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * sh-tdep.h (sh_show_regs): Add FRAME parameter.
        * sh-tdep.c (sh_show_regs): Likewise.
        (sh_show_regs_command): Pass current frame to sh_show_regs routine.
        (sh_generic_show_regs): Add FRAME parameter.  Use register
        values from that frame instead of calling read_register.
        (sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs,
        sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
        sh_dsp_show_regs): Likewise.
        * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs,
        sh64_show_regs): Likewise.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Read from
        current regcache instead of calling read_register.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * mep-tdep.c (current_me_module): Read from current regcache
        instead of calling read_register.
        (current_options): Likewise.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * cris-tdep.c (cris_stopped_data_address): Read register values
        from current frame instead of calling read_register.
        * frv-tdep.c (frv_stopped_data_address): Likewise.

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * solib-sunos.c (sunos_solib_create_inferior_hook): Use write_pc
        instead of write_register (PC_REGNUM, ...).

2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * solib-sunos.c (sunos_solib_create_inferior_hook): Add comment
        explaining why the PC adjustment code is necessary.

2007-06-15  Vladimir Prus  <vladimir@codesourcery.com>

        * m68k-tdep.h (enum m68k_flavour): New. 
        (struct gdbarch_tdep): New fields
        float_return, flavour and fpregs_present.
        * m68k-tdep.c (m68k_register_type): Use
        fpregs_present and conditionalize floating
        registers type on flavour.
        (m68k_register_names): New.
        (m68k_register_name): Use the above.
        (m68k_convert_register_p): Consult fpregs_present.
        (m68k_register_to_value, m68k_value_to_register):
        Use register_type to obtain the type of floating
        point registers.
        (m68k_svr4_extract_return_value): Check tdep->float_return.
        Use register_type to get the type of floating
        point regiters.
        (m68k_svr4_store_return_value): Likewise.
        (m68k_dwarf_reg_to_regnum): Check tdep->fpregs_present.
        (m68k_analyze_register_saves): Likewise.
        (m68k_gdbarch_init): Extract infromation
        from XML description, if present.  Guess coldfire by
        looking at the file, if present. Conditionalize
        setting of long double format.  Set decr_pc_after_break
        to 2 on coldfire and fido.  Enable XML-driven
        register description.
        * m68kbsd-tdep.c (m68kbsd_fpreg_offset): Use
        size of tdep->fpreg_type, as opposed to hardcoded value.
        * Makefile.in (m68k-tdep.o): Update dependencies.
        
2007-06-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * NEWS: Mention "info spu" commands and qXfer:spu:read and
        qXfer:spu:write remote packet types.

2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * xml-tdesc.c (tdesc_start_target): New.
        (target_attributes): New.
        (tdesc_elements): Use it.
        * features/gdb-target.dtd: Add #FIXED version attribute for
        <target>.

2007-06-13  Arthur Huillet  <arthur.huillet@free.fr>

        * mi/mi-cmd-var.c (mi_cmd_var_assign): Fix typo.

2007-06-13  Claudio Fontana <claudio.fontana@gmail.com>

        * fork-child.c (fork_inferior): Update comment.

2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * features/Makefile: Generate regformats for mips-linux and
        mips64-linux.
        * features/sort-regs.xsl: Correct typo.
        * regformats/reg-mips.dat, regformats/reg-mips64.dat: Delete.
        * regformats/mips-linux.dat, regformats/mips64-linux.dat: New generated
        files.

2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * config/mips/linux.mh (TDEP_XML): New.
        * features/mips-linux.xml, features/mips64-linux.xml: New files.
        * mips-linux-nat.c (mips_linux_register_addr): Handle
        MIPS_RESTART_REGNUM.
        (mips64_linux_register_addr): Likewise.
        (super_xfer_partial, mips_linux_xfer_partial): New.
        (_initialize_mips_linux_nat): Add them to the target_ops.
        * mips-linux-tdep.c (mips_supply_gregset): Handle MIPS_RESTART_REGNUM.
        (mips_fill_gregset, mips64_supply_gregset, mips64_fill_gregset)
        (mips_linux_o32_sigframe_init)
        (mips_linux_n32n64_sigframe_init): Likewise.
        (mips_linux_write_pc, mips_linux_restart_reg_p): New.
        (mips_linux_init_abi): Use mips_linux_write_pc.  Check for the
        "org.gnu.gdb.mips.linux" feature.
        * mips-linux-tdep.h (MIPS_RESTART_REGNUM): New constant.
        (mips_linux_restart_reg_p): New prototype.
        * mips-tdep.c (mips_gdbarch_init): Pass tdesc_data to the OS/ABI
        initialization routine.
        * Makefile.in (mips-linux-tdep.o, mips-linux-nat.o): Update.

2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (mips-tdep.o): Update.
        * mips-tdep.c (struct register_alias, mips_o32_aliases)
        (mips_n32_n64_aliases, mips_register_aliases): New.
        (mips_register_name): Call tdesc_register_name.
        (mips_tdesc_register_reggroup_p): New.
        (mips_pseudo_register_type, value_of_mips_user_reg): New.
        (mips_gdbarch_init): Add target-described register support.
        Register aliases for register names.
        * target-descriptions.c (tdesc_register_name): Make global.
        (tdesc_register_in_reggroup_p): New function, broken out from
        tdesc_register_reggroup_p.
        (tdesc_register_reggroup_p): Use it.
        * target-descriptions.h (tdesc_register_name)
        (tdesc_register_in_reggroup_p): New prototypes.
        * NEWS: Correct formatting.  Mention MIPS register support.
        * features/mips-cp0.xml, features/mips-fpu.xml,
        features/mips64-cp0.xml, gdb/features/mips64-fpu.xml, mips-cpu.xml,
        features/mips64-cpu.xml: New files.

2007-06-13  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_ADDR_BIT): Replace by gdbarch_addr_bit.
        * valops.c (value_cast): Likewise.
        * utils.c (strlen_paddr, paddr, paddr_nz, paddress): Likewise.
        * ui-out.c (ui_out_field_core_addr): Likewise.
        * tracepoint.c (tracepoints_info): Likewise.
        * symtab.c (print_msymbol_info): Likewise.
        * solib-irix.c (irix_current_sos)
        (irix_open_symbol_file_object): Likewise.
        * remote.c (build_remote_gdbarch_data): Likewise.
        * prologue-value.c (make_pv_area): Likewise.
        * procfs.c (info_mappings_callback): Likewise.
        * printcmd.c (print_scalar_formatted)
        (deprecated_print_address_numeric): Likewise.
        * memattr.c (mem_info_command): Likewise.
        * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
        * gdbtypes.c (build_flt, gdbtypes_post_init): Likewise.
        * exec.c (print_section_info): Likewise.
        * dwarf2read.c (read_subrange_type): Likewise.
        * dwarf2loc.c (find_location_expression): Likewise.
        * dwarf2expr.c (dwarf2_read_address, unsigned_address_type)
        (signed_address_type, execute_stack_op): Likewise.
        * breakpoint.c (print_one_breakpoint, breakpoint_1): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-13  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_ARCHITECTURE): Replace by gdbarch_bfd_arch_info.
        * arch-utils.c (show_architecture): Likewise.
        * remote-mips.c (mips_open): Likewise
        * nto-tdep.c (nto_find_and_open_solib)
        (nto_init_solib_absolute_prefix): Likewise.
        * nto-procfs (procfs_open): Likewise.
        * m68hc11-tdep.c (gdb_print_insn_m68hc11): Likewise.
        * gcore.c (default_gcore_mach, default_gcore_arch): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-13  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_BFD_VMA_BIT): Replace by gdbarch_bfd_vma_bit.
        * gdbtypes.c (build_flt): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-13  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (BREAKPOINT_FROM_PC): Replace by
        gdbarch_breakpoint_from_pc.
        * s390-tdep.c (s390_gdbarch_init): Likewise (comment).
        * remote.c (remote_insert_breakpoint)
        (remote_insert_hw_breakpoint): Likewise.
        * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
        * mips-tdep.c (mips_breakpoint_from_pc): Likewise (comment).
        * breakpoint.h (bp_target_info): Likewise (comment).
        * breakpoint.c (read_memory_nobpt): Likewise.
        * mem-break.c (default_memory_insert_breakpoint): Likewise.
        (symtab.h, breakpoint.h): Remove include. Remove unnecessary comment.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-13  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_PTR_BIT): Replace with gdbarch_ptr_bit.
        * solib-svr4.c (svr4_truncate_ptr): Likewise.
        * solib-pa64.c (read_dynamic_info): Likewise.
        * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Likewise.
        * solib.c (info_sharedlibrary_command): Likewise.
        * s390-nat.c (SUBOFF): Likewise.
        * p-valprint.c (pascal_val_print): Likewise.
        * procfs.c (info_proc_mappings): Likewise.
        * printcmd.c (decode_format): Likewise.
        * nto-tdep.c (nto_truncate_ptr): Likewise.
        * mips-linux-tdep.c (mips_linux_get_longjmp_target)
        (mips64_linux_get_longjmp_target): Likewise.
        * m68k-tdep.c (m68k_get_longjmp_target): Likewise.
        * jv-valprint.c (java_value_print): Likewise.
        * jv-lang.c (get_java_object_header_size): Likewise.
        * hppa-tdep.c (skip_prologue_hard_way, hppa_frame_cache): Likewise.
        * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code)
        (hppa_hpux_unwind_adjust_stub): Likewise.
        * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
        * gdbtypes.c (make_pointer_type, make_reference_type)
        (smash_to_memberptr_type): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * mips-tdep.c (mips_print_register): Remove unused ALL argument.
        (print_gp_register_row): Stop before printing a register bigger
        than the ABI register size.
        (mips_print_registers_info): Update call to mips_print_register.

2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * expression.h (enum exp_opcode): Document a register name for
        OP_REGISTER.
        * parse.c (write_dollar_variable): Write the register name for
        OP_REGISTER.
        (operator_length_standard): Expect the register name following
        OP_REGISTER.
        * ada-lang.c (resolve_subexp): Likewise.
        * ax-gdb.c (gen_expr): Likewise.
        * eval.c (evaluate_subexp_standard): Likewise.
        * expprint.c (print_subexp_standard, dump_subexp_body_standard):
        Likewise.
        * tracepoint.c (encode_actions): Likewise.

2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * utils.c (set_screen_size): Use INT_MAX for default columns.

2007-06-13  Ulrich Weigand  <uweigand@de.ibm.com>

        * remote.c (remote_protocol_features): Add qXfer:spu:read and
        qXfer:spu:write packet types.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (DEPRECATED_STACK_ALIGN): Remove.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (STAB_REG_TO_REGNUM): Replace by
        gdbarch_stab_reg_to_regnum.
        * stabsread.c (define_symbol): Likewise.
        * gdbarch.sh (ECOFF_REG_TO_REGNUM): Replace by
        gdbarch_ecoff_reg_to_regnum.
        * mdebugread.c (parse_symbol): Likewise.
        * i386-tdep.c (i386_gdbarch_init): Likewise (comment).
        * gdbarch.sh (DWARF_REG_TO_REGNUM): Replace by
        gdbarch_dwarf_reg_to_regnum.
        * gdbarch.sh (SDB_REG_TO_REGNUM): Replace by gdbarch_sdb_reg_to_regnum.
        * coffread.c (process_coff_symbol): Likewise.
        * gdbarch.sh (DWARF2_REG_TO_REGNUM): Replace by
        gdbarch_dwarf2_reg_to_regnum.
        * dwarf2loc.c (dwarf_expr_read_reg,dwarf2_evaluate_loc_desc)
        (locexpr_describe_location): Likewise.
        * dwarf2-frame.c (read_reg,execute_cfa_program,dwarf2_frame_cache)
        (dwarf2_frame_prev_register,dwarf2_signal_frame_this_id): Likewise.
        * dwarf2loc.c (DWARF2_REG_TO_REGNUM): Remove macro.
        * dwarf2read.c (DWARF2_REG_TO_REGNUM): Remove macro.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (SMASH_TEXT_ADDRESS): Replace by
        gdbarch_smash_text_address.
        * somread.c (som_symtab_read): Likewise.
        * elfread.c (record_minimal_symbol): Likewise.
        * dbxread.c (process_one_symbol): Likewise.
        * coffread.c (coff_symtab_read): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (REGISTER_TO_VALUE): Replace by gdbarch_register_to_value.
        * findvar.c (value_from_register): Likewise.
        * gdbarch.sh (VALUE_TO_REGISTER): Replace by gdbarch_value_to_register.
        * valops.c (value_assign): Likewise.
        * gdbarch.sh (CONVERT_REGISTER_P): Replace by
        gdbarch_convert_register_p.
        * findvar.c (value_from_register): Likewise.
        * valops.c (value_assign): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (REGISTER_SIM_REGNO): Replace by
        gdbarch_register_sim_regno.
        * sim-regno.h (sim_regno): Likewise (comment).
        * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_VIRTUAL_FRAME_POINTER): Replace by
        gdbarch_virtual_frame_pointer.
        * tracepoint.c (encode_actions): Likewise.
        * dwarf2loc.c (dwarf2_loc_desc_needs_frame): Likewise.
        * ax-gdb.c (gen_frame_args_address, gen_frame_locals_address): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_FLOAT_BIT): Replace by gdbarch_float_bit.
        * p-lang.c (pascal_create_fundamental_type): Likewise.
        * objc-lang.c (objc_create_fundamental_type): Likewise.
        * mdebugread.c (_initialize_mdebugread): Likewise.
        * m2-lang.c (m2_create_fundamental_type)
        (_initialize_m2_language): Likewise.
        * gdbtypes.c (build_gdbtypes): Likewise.
        * f-lang.c (f_create_fundamental_type, build_fortran_types): Likewise.
        * doublest.c (floatformat_from_length): Likewise.
        * c-lang.c (c_create_fundamental_type): Likewise.
        * ada-lang.c (ada_create_fundamental_type)
        (ada_language_arch_info): Likewise.
        * gdbarch.sh (TARGET_FLOAT_FORMAT): Replace by gdbarch_float_format.
        * value.c (unpack_double): Likewise (comment).
        * gdbtypes.c (build_gdbtypes): Likewise.
        * doublest.c (floatformat_from_length): Likewise.
        * gdbarch.sh (TARGET_DOUBLE_BIT): Replace by gdbarch_double_bit.
        * valarith.c (value_binop): Likewise.
        * p-lang.c (pascal_create_fundamental_type): Likewise.
        * objc-lang.c (objc_create_fundamental_type): Likewise.
        * mdebugread.c (_initialize_mdebugread): Likewise.
        * m2-lang.c (m2_create_fundamental_type): Likewise.
        * gdbtypes.c (build_gdbtypes): Likewise.
        * f-lang.c (f_create_fundamental_type, build_fortran_types): Likewise.
        * doublest.c (floatformat_from_length): Likewise.
        * cris-tdep.c (cris_gdbarch_init): Likewise (comment).
        * c-lang.c (c_create_fundamental_type): Likewise.
        * ada-lex.l (processReal): Likewise.
        * ada-lang.c (ada_create_fundamental_type)
        (ada_language_arch_info): Likewise.
        * gdbarch.sh (TARGET_DOUBLE_FORMAT): Replace by gdbarch_double_format.
        * value.c (unpack_double): Likewise (comment).
        * gdbtypes.c (build_gdbtypes): Likewise.
        * doublest.c (floatformat_from_length): Likewise.
        * gdbarch.sh (TARGET_LONG_DOUBLE_BIT): Replace by
        gdbarch_long_double_bit.
        * p-lang.c (pascal_create_fundamental_type): Likewise.
        * objc-lang.c (objc_create_fundamental_type): Likewise.
        * m2-lang.c (m2_create_fundamental_type): Likewise.
        * gdbtypes.c (build_gdbtypes): Likewise.
        * f-lang.c (f_create_fundamental_type, build_fortran_types): Likewise.
        * doublest.c (floatformat_from_length): Likewise.
        * c-lang.c (c_create_fundamental_type): Likewise.
        * ada-lex.l (processReal): Likewise.
        * ada-lang.c (ada_create_fundamental_type)
        (ada_language_arch_info): Likewise.
        * gdbarch.sh (TARGET_LONG_DOUBLE_FORMAT): Replace by
        gdbarch_long_double_format.
        * gdbtypes.c (build_gdbtypes): Likewise.
        * doublest.c (floatformat_from_length): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_SHORT_BIT): Replace by gdbarch_int_bit.
        * ada-lang.c (ada_create_fundamental_type)
        (ada_language_arch_info): Likewise.
        * c-lang.c (c_create_fundamental_type): Likewise.
        * f-lang.c (f_create_fundamental_type, build_fortran_types): Likewise.
        * gdbtypes.c (build_gdbtypes, gdbtypes_post_init): Likewise.
        * m2-lang.c (m2_create_fundamental_type): Likewise.
        * objc-lang.c (objc_create_fundamental_type): Likewise.
        * p-lang.c (pascal_create_fundamental_type): Likewise.
        * gdbarch.sh (TARGET_INT_BIT): Replace by gdbarch_int_bit.
        * c-exp.y (parse_number): Likewise.
        * objc-exp.y (parse_number): Likewise.
        * ada-lex.l (processInt): Likewise.
        * f-exp.y (parse_number): Likewise.
        * p-exp.y (parse_number): Likewise.
        * ada-lang.c (ada_create_fundamental_type, ada_language_arch_info)
        (gdbtypes_post_init, build_gdbtypes): Likewise.
        * p-lang.c (pascal_create_fundamental_type): Likewise.
        * parse.c (build_parse): Likewise.
        * xcoffread.c (_initialize_xcoffread): Likewise.
        * stabsread.c (define_symbol, read_one_struct_field, read_enum_type)
        (read_range_type): Likewise.
        * objc-lang.c (objc_create_fundamental_type): Likewise.
        * f-lang.c (build_fortran_types, f_create_fundamental_type): Likewise.
        * m2-lang.c (m2_create_fundamental_type, _initialize_m2_language)
        (m2_create_fundamental_type): Likewise.
        * c-lang.c (c_create_fundamental_type): Likewise.
        * coffread.c (coff_read_enum_type): Likewise.
        * mdebugread.c (parse_symbol, _initialize_mdebugread): Likewise.
        * dwarf2read.c (new_symbol): Likewise.
        * gdbarch.sh (TARGET_LONG_BIT): Replace by gdbarch_long_bit.
        * c-exp.y (parse_number): Likewise.
        * objc-exp.y (parse_number): Likewise.
        * ada-lex.l (processInt): Likewise.
        * f-exp.y (parse_number): Likewise.
        * p-exp.y (parse_number): Likewise.
        * valarith.c (value_binop): Likewise.
        * symfile.c (read_target_long_array, simple_overlay_update_1): Likewise.
        * ada-lang.c (ada_create_fundamental_type)
        (ada_language_arch_info): Likewise.
        * gdbtypes.c (build_gdbtypes, gdbtypes_post_init): Likewise.
        * symfile.c (TARGET_LONG_BYTES): Likewise.
        * p-lang.c (pascal_create_fundamental_type): Likewise.
        * objc-lang.c (objc_create_fundamental_type): Likewise.
        * m2-lang.c (m2_create_fundamental_type): Likewise.
        * f-lang.c (f_create_fundamental_type): Likewise.
        * c-lang.c (c_create_fundamental_type): Likewise.
        * coffread.c (decode_base_type): Likewise.
        * gdbarch.sh (TARGET_LONG_LONG_BIT): Replace by gdbarch_long_long_bit.
        * c-exp.y (parse_number): Likewise.
        * objc-exp.y (parse_number): Likewise.
        * p-exp.y (parse_number): Likewise.
        * ada-lang.c (ada_create_fundamental_type)
        (ada_language_arch_info): Likewise.
        * gdbtypes.c (gdbtypes_post_init, build_gdbtypes): Likewise.
        * stabsread.c (read_range_type): Likewise.
        * p-lang.c (pascal_create_fundamental_type): Likewise.
        * objc-lang.c (objc_create_fundamental_type): Likewise.
        * m2-lang.c (m2_create_fundamental_type): Likewise.
        * f-lang.c (f_create_fundamental_type): Likewise.
        * c-lang.c (c_create_fundamental_type): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Andreas Schwab  <schwab@suse.de>

        * frame-unwind.h (frame_dealloc_cache_ftype): Define.
        (struct frame_unwind): Add dealloc_cache.
        * frame.c (reinit_frame_cache): Call dealloc_cache on all caches.

        * libunwind-frame.h (libunwind_frame_dealloc_cache): Declare.
        * libunwind-frame.c (libunwind_frame_dealloc_cache): Define.
        (libunwind_frame_unwind): Set dealloc_cache.
        * ia64-tdep.c (ia64_libunwind_frame_unwind): Set dealloc_cache.

2007-06-12  Ulrich Weigand  <uweigand@de.ibm.com>
            Markus Deuling  <deuling@de.ibm.com>

        * remote.c (remote_write_qxfer): New function.
        (remote_xfer_partial): Add handling for TARGET_OBJECT_SPU.
        (remote_read_qxfer): Do not cache empty objects.
        (_initialize_remote): Add PACKET_qXfer_spu_read and
        PACKET_qXfer_spu_write.

2007-06-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * target.h (enum target_object): Add TARGET_OBJECT_SPU.
        * spu-linux-nat.c (spu_xfer_partial): Handle TARGET_OBJECT_SPU.

        * spu-tdep.h (SPU_NUM_PSEUDO_REGS): Add 5 pseudo registers.
        (enum spu_regnum): Add SPU_FPSCR_REGNUM, SPU_SRR0_REGNUM,
        SPU_LSLR_REGNUM, SPU_DECR_REGNUM, SPU_DECR_STATUS_REGNUM.
        * spu-tdep.c (infospucmdlist): New variable.
        (spu_register_name): Handle additional pseudo registers.
        (spu_register_type): Likewise.
        (spu_pseudo_register_read): Likewise.
        (spu_pseudo_register_write): Likewise.
        (spu_pseudo_register_read_spu): New function.
        (spu_pseudo_register_write_spu): Likewise.
        (info_spu_event_command): New function.
        (info_spu_signal_command): Likewise.
        (info_spu_mailbox_list): Likewise.
        (info_spu_mailbox_command): Likewise.
        (spu_mfc_get_bitfield): Likewise.
        (info_spu_dma_cmdlist): Likewise.
        (info_spu_dma_command): Likewise.
        (info_spu_proxydma_command): Likewise.
        (info_spu_command): Likewise.
        (_initialize_spu_tdep): Install "info spu" commands.

2007-06-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-linux-nat.c (spu_proc_xfer_spu): Do not return failure when
        accessing non-seekable spufs files.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (SKIP_TRAMPOLINE_CODE): Replace by
        gdbarch_skip_trampoline_code.
        * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise (comment).
        * objc-lang.c (objc_skip_trampoline)
        (objc_submethod_helper_data): Likewise.
        * m32c-lang.c (m32c_skip_trampoline_code): Likewise (comment).
        * infrun.c (handle_inferior_event): Likewise.
        * gnu-v3-abi.c (gnuv3_skip_trampoline): Likewise.
        * gdbarch.sh (IN_SOLIB_RETURN_TRAMPOLINE): Replace by
        gdbarch_in_solib_return_trampoline.
        * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise (comment).
        * infrun.c (handle_inferior_event): Likewise.
        * hppa-tdep.c (hppa_stub_unwind_sniffer): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (SKIP_PROLOGUE): Replace by gdbarch_skip_prologue.
        * symtab.c (find_function_start_sal, in_prologue): Likewise.
        * linespec.c (minsym_found): Likewise.
        * infrun.c (step_into_function): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (NAME_OF_MALLOC): Replace by gdbarch_name_of_malloc.
        * valops.c (value_allocate_space_in_inferior): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (MEMORY_INSERT_BREAKPOINT): Replace by
        gdbarch_memory_insert_breakpoint.
        * mem-break.c (memory_insert_breakpoint): Likewise.
        * gdbarch.sh (MEMORY_REMOVE_BREAKPOINT): Replace by
        gdbarch_memory_remove_breakpoint.
        * mem-break.c (memory_remove_breakpoint): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (FETCH_TLS_LOAD_MODULE_ADDRESS): Replace by
        gdbarch_fetch_tls_load_module_address.
        * gdbarch.sh (FETCH_TLS_LOAD_MODULE_ADDRESS_P): Replace by
        gdbarch_fetch_tls_load_module_address_p.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (DECR_PC_AFTER_BREAK): Replace by
        gdbarch_decr_pc_after_break.
        * tracepoint.c (trace_dump_command): Likewise.
        * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
        * linux-thread-db.c (check_event): Likewise.
        * linux-nat.c (cancel_breakpoints_callback): Likewise.
        * infrun.c (adjust_pc_after_break, normal_stop): Likewise.
        * frame.h: Likewise (comment).
        * dummy-frame.c (deprecated_pc_in_call_dummy): Likewise.
        * aix-thread.c (aix_thread_wait): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (ADDRESS_CLASS_TYPE_FLAGS): Replace by
        gdbarch_address_class_type_flags.
        * dwarf2read.c (read_tag_pointer_type): Likewise.
        * gdbarch.sh (ADDRESS_CLASS_TYPE_FLAGS_P): Replace by
        gdbarch_address_class_type_flags_p.
        * dwarf2read.c (read_tag_pointer_type): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (ADDR_BITS_REMOVE): Replace by gdbarch_addr_bits_remove.
        * value.c (value_as_address): Likewise (comment).
        * remote-mips.c (common_breakpoint): Likewise.
        * regcache.c (read_pc_pid): Likewise.
        * printcmd.c (do_one_display): Likewise.
        * monitor.c (monitor_write_memory, monitor_read_memory)
        (monitor_insert_breakpoint): Likewise.
        * mips-tdep.c (heuristic_proc_start): Likewise.
        * infrun.c (insert_step_resume_breakpoint_at_frame)
        (insert_step_resume_breakpoint_at_caller): Likewise.
        * buildsym.c (record_line): Likewise.
        * arm-tdep.c (arm_scan_prologue, thumb_get_next_pc)
        (arm_get_next_pc): Likewise.
        * armnbsd-nat.c (arm_supply_gregset, fetch_register, store_register)
        (store_regs): Likewise.
        * arm-linux-tdep.c (arm_linux_supply_gregset): Likewise.
        * arm-linux-nat.c (fetch_register, fetch_regs): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (REGISTER_NAME): Replace by gdbarch_register_name.
        * tracepoint.c (scope_info): Likewise.
        * target.c (debug_print_register): Likewise.
        * stack.c (frame_info): Likewise.
        * sh-tdep.c (sh_register_reggroup_p): Likewise.
        * sh64-tdep.c (sh64_do_fp_register, sh64_do_register)
        (sh64_media_print_registers_info)
        (sh64_compact_print_registers_info): Likewise.
        * rs6000-tdep.c (rs6000_register_reggroup_p): Likewise.
        * remote-sim.c (gdbsim_fetch_register): Likewise.
        * remote.c (packet_reg): Likewise (comment).
        * reggroups.c (default_register_reggroup_p): Likewise.
        * regcache.c (regcache_dump): Likewise.
        * printcmd.c (address_info): Likewise.
        * ppc-linux-nat.c (fetch_register, store_register): Likewise.
        * mt-dep.c (mt_registers_info): Likewise.
        * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Likewise (comment).
        * mips-tdep.c (mips_register_reggroup_p, mips_read_fp_register_single)
        (mips_read_fp_register_double, mips_print_fp_register)
        (mips_print_register, print_gp_register_row, mips_print_registers_info)
        (mips_register_sim_regno): Likewise.
        * m68klinux-nat.c (regmap, fetch_register, store_register): Likewise.
        * inf-ptrace.c (inf_ptrace_fetch_register)
        (inf_ptrace_store_register): Likewise.
        * infcmd.c (default_print_registers_info): Likewise.
        * ia64-linux-nat.c (ia64_linux_fetch_register)
        (ia64_linux_store_register): Likewise.
        * i386-linux-nat.c (fetch_register, store_register): Likewise.
        * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Likewise.
        * hppa-linux-nat.c (fetch_register, store_register): Likewise.
        * hppa-hpux-nat.c (hppa_hpux_fetch_register)
        (hppa_hpux_store_register): Likewise.
        * findvar.c (locate_var_value): Likewise.
        * dwarf2loc.c (locexpr_describe_location): Likewise.
        * dwarf2-frame.c (execute_cfa_program): Likewise.
        * arm-tdep.c (arm_push_dummy_call): Likewise.
        * arch-utils.c (legacy_register_sim_regno): Likewise.
        * alpha-tdep.c (alpha_register_reggroup_p): Likewise.
        * alpha-nat.c (fetch_osf_core_registers): Likewise.
        * mi/mi-main.c (mi_cmd_data_list_register_names)
        (mi_cmd_data_list_changed_registers, mi_cmd_data_list_register_values)
        (mi_cmd_data_write_register_values): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-07  Daniel Jacobowitz  <dan@codesourcery.com>

        * target-memory.c (blocks_to_erase): Correct off-by-one error.

2007-06-06  Vladimir Prus  <vladimir@codesourcery.com>
        
        * remote.c (process_g_packet): Don't check size.
        * gdbarch.sh: Remove register_bytes_ok.
        * gdbarch.c: Regenerated.
        * gdbarch.h: Regenerated.
        * m68k-tdep.c (REGISTER_BYTES_NOFP): Remove.
        (m68k_register_bytes_ok): Remove.
        (m68k_gdbarch_init): Don't register m68k_register_bytes_ok.
        
2007-06-06  Andreas Schwab  <schwab@suse.de>

        * libunwind-frame.c (unw_destroy_addr_space_p): Define.
        (destroy_addr_space_name): Define.
        (libunwind_load): Get address of destroy_addr_space function.
        (libunwind_frame_cache): Destroy unw_addr_space_t object before
        returning unsuccessfully.
        (libunwind_frame_sniffer): Destroy unw_addr_space_t object before
        returning.
        (libunwind_sigtramp_frame_sniffer): Likewise.
        (libunwind_get_reg_special): Likewise.

2007-06-06  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (FETCH_POINTER_ARGUMENT): Replace by
        gdbarch_fetch_pointer_argument.
        * objc-lang.c (OBJC_FETCH_POINTER_ARGUMENT): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-06  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (HAVE_NONSTEPPABLE_WATCHPOINT): Replace by
        gdbarch_have_nonsteppable_watchpoint.
        * infrun.c (handle_inferior_event, adjust_pc_after_break): Likewise.
        * gdbarch.sh (CANNOT_STEP_BREAKPOINT): Replace by
        gdbarch_cannot_step_breakpoint.
        * infrun.c (resume): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-06  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (FRAME_ARGS_SKIP): Replace by gdbarch_frame_args_skip.
        * stack.c (print_frame_args): Likewise.
        * gdbarch.sh (FRAME_NUM_ARGS): Replace by gdbarch_frame_num_args.
        * stack.c (print_args_stub, frame_info): Likewise.
        * gdbarch.sh (FRAME_NUM_ARGS_P): Replace by gdbarch_frame_num_args_p.
        * stack.c (print_args_stub, frame_info): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-06  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (COFF_MAKE_MSYMBOL_SPECIAL): Replace by
        gdbarch_coff_make_msymbol_special.
        * coffread.c (coff_symtab_read): Likewise.
        * gdbarch.sh (ELF_MAKE_MSYMBOL_SPECIAL): Replace by
        gdbarch_elf_make_msymbol_special.
        * elfread.c (elf_symtab_read): Likewise.
        * mips-tdep.c (mips_elf_make_msymbol_special): Likewise (comment).
        * sh64-tdep.c (MSYMBOL_IS_SPECIAL): Likewise (comment).
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-06  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (FRAME_RED_ZONE_SIZE): Replace by
        gdbarch_frame_red_zone_size.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-06  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (INNER_THAN): Replace by gdbarch_inner_than.
        * infcall.c (call_function_by_hand): Likewise.
        * gcore.c (derive_stack_segment): Likewise.
        * frame.c (frame_id_inner): Likewise.
        * arch-utils.c (core_addr_lessthan): Likewise (comment).
        * ada-lang.c (ensure_lval): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-06  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (ADDRESS_TO_POINTER): Replace by
        gdbarch_address_to_pointer.
        * findvar.c (store_typed_address): Likewise.
        * gdbtypes.c (make_pointer_type): Likewise (comment).
        * procfs.c (procfs_address_to_host_pointer): Likewise.
        * std-regs.c (value_of_builtin_frame_reg): Likewise.
        (value_of_builtin_frame_fp_reg): Likewise.
        (value_of_builtin_frame_pc_reg): Likewise.
        * utils.c (paddress): Likewise (comment).
        * gdbarch.sh (POINTER_TO_ADDRESS): Replace by
        gdbarch_pointer_to_address.
        * findvar.c (extract_typed_address): Likewise.
        * gdbtypes.c (make_pointer_type): Likewise (comment).
        * valops.c (value_cast): Likewise (comment).
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-06  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (GET_LONGJMP_TARGET): Replace by gdbarch_get_longjmp_target.
        * infrun.c (handle_inferior_event): Likewise.
        * gdbarch.sh (GET_LONGJMP_TARGET_P): Replace by
        gdbarch_get_longjmp_target_p.
        * breakpoint.c (breakpoint_re_set): Likewise.
        * infrun.c (handle_inferior_event): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-06-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * hppa-hpux-tdep.c (args_for_find_stub, HP_ACC_EH_notify_hook,
        HP_ACC_EH_set_hook_value, HP_ACC_EH_notify_callback, HP_ACC_EH_break,
        HP_ACC_EH_catch_throw, HP_ACC_EH_catch_catch, __eh_notification,
        hp_cxx_exception_support, hp_cxx_exception_support_initialized,
        eh_notify_hook_addr, eh_notify_callback_addr, eh_break_addr,
        eh_catch_throw_addr, break_callback_sal, setup_d_pid_in_inferior,
        find_stub_with_shl_get, cover_find_stub_with_shl_get,
        initialize_hp_cxx_exception_support, child_enable_exception_callback,
        current_ex_event, child_get_current_exception_event): Remove.
        (hppa_hpux_inferior_created): Remove.
        (hppa_hpux_init_abi): Do not install hppa_hpux_inferior_created.

        * breakpoint.h (deprecated_exception_catchpoints_are_fragile): Remove.
        (deprecated_exception_support_initialized): Remove.
        * breakpoint.c (deprecated_exception_catchpoints_are_fragile): Remove.
        (deprecated_exception_support_initialized): Remove.
        (breakpoint_init_inferior): Remove handling of non-zero
        deprecated_exception_catchpoints_are_fragile.

        * symtab.h (deprecated_hp_som_som_object_present): Remove.
        * symtab.c (deprecated_hp_som_som_object_present): Remove.
        * c-typeprint.c (c_type_print_base): Remove handling of non-zero
        deprecated_hp_som_som_object_present.
        * eval.c (evaluate_subexp_standard): Likewise.
        * valops.c (value_cast): Likewise.

        * parse.c (parse_nested_classes_for_hpacc, coloncolon): Remove.
        * parser-defs.h (parse_nested_classes_for_hpacc): Remove.
        * c-exp.y (yylex): Do not call parse_nested_classes_for_hpacc.

2007-06-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * objfiles.h (ImportEntry, ExportEntry): Remove types.
        (struct objfile): Remove import_list, import_list_size,
        export_list, export_list_size members.
        (is_in_import_list): Remove prototype.
        * objfiles.c (is_in_import_list): Remove.
        * somread.c (init_import_symbols, init_export_symbols): Remove.
        (som_symfile_read): Do not call init_import_symbols.  Do not
        set objfile->export_list and objfile->export_list_size.

2007-06-05  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2read.c (dwarf2_symbol_mark_computed): Fix formatting.
        Use the original objfile if necessary.

2007-06-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * defs.h (ldirname): New prototype.
        * dwarf2read.c (read_file_scope): Use DW_AT_name if DW_AT_comp_dir is
        missing.
        * utils.c (ldirname): New function.
        * xml-tdesc.c (file_read_description_xml): Use ldirname.

2007-06-01  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-tdep.c (spu_push_dummy_call): Store stack back chain.

2007-06-01  Joel Brobecker  <brobecker@adacore.com>

        * solib-svr4.c (svr4_solib_create_inferior_hook): Remove warning.

2007-06-01  Ulrich Weigand  <uweigand@de.ibm.com>

        * irix5-nat.c (JB_ELEMENT_SIZE, get_longjmp_target): Remove.

2007-06-01  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-linux-tdep.c (INSTR_SC, INSTR_LI_R0_0x6666, INSTR_LI_R0_0x7777,
        INSTR_LI_R0_NR_sigreturn, INSTR_LI_R0_NR_rt_sigreturn): Remove.
        (PPC_LINUX_SIGNAL_FRAMESIZE, PPC_LINUX_REGS_PTR_OFFSET,
        PPC_LINUX_HANDLER_PTR_OFFSET): Remove.
        (ppc_linux_in_sigtramp, insn_is_sigreturn,
        ppc_linux_at_sigtramp_return_path): Remove.

2007-05-31  Markus Deuling  <deuling@de.ibm.com>

        * xtensa-tdep.c (XTENSA_IS_ENTRY, extract_call_winsize)
        (xtensa_register_write_masked, xtensa_register_read_masked)
        (xtensa_extract_return_value, xtensa_store_return_value
        (xtensa_push_dummy_call, xtensa_breakpoint_from_pc): Replace 
        TARGET_BYTE_ORDER by gdbarch_byte_order.
        * sh-tdep.c (sh_breakpoint_from_pc, gdb_print_insn_sh)
        (sh_justify_value_in_reg, sh_next_flt_argreg, sh_push_dummy_call_fpu)
        (sh_extract_return_value_fpu, sh_store_return_value_fpu): Likewise.
        * sh64-tdep.c (sh64_breakpoint_from_pc, gdb_print_insn_sh64)
        (sh64_push_dummy_call, sh64_extract_return_value)
        (sh64_store_return_value, sh64_register_convert_to_virtual)
        (sh64_register_convert_to_raw, sh64_pseudo_register_read)
        (sh64_pseudo_register_write, sh64_do_fp_register)
        (sh64_frame_prev_register): Likewise.
        * score-tdep.c (score_print_insn, score_breakpoint_from_pc)
        (score_return_value, score_push_dummy_call, score_fetch_inst): Likewise.
        * rs6000-tdep.c (rs6000_breakpoint_from_pc, rs6000_push_dummy_call)
        (e500_move_ev_register,gdb_print_insn_powerpc): Likewise.
        * remote-m32r-sdi.c (m32r_resume, m32r_wait): Likewise.
        * ppc-linux-nat.c (store_register): Likewise.
        * nto-tdep.c (nto_find_and_open_solib)
        (nto_init_solib_absolute_prefix): Likewise.
        * mips-tdep.c (mips_pseudo_register_read, mips_pseudo_register_write)
        (mips_convert_register_p, mips_eabi_push_dummy_call)
        (mips_n32n64_push_dummy_call, mips_n32n64_return_value)
        (mips_o32_push_dummy_call, mips_o32_return_value)
        (mips_o64_push_dummy_call, mips_o64_return_value, mips_o64_return_value)
        (mips_read_fp_register_single, mips_read_fp_register_double)
        (mips_print_register, print_gp_register_row, gdb_print_insn_mips)
        (mips_breakpoint_from_pc): Likewise.
        * mipsnbsd-tdep.c (mipsnbsd_sigtramp_offset): Likewise.
        * mips-linux-tdep.c (mips64_supply_fpregset, mips64_fill_fpregset)
        (mips_linux_o32_sigframe_init): Likewise.
        * m32r-tdep.c (m32r_memory_insert_breakpoint)
        (m32r_memory_remove_breakpoint, m32r_breakpoint_from_pc): Likewise.
        * libunwind-frame.c (libunwind_frame_cache, libunwind_frame_sniffer)
        (libunwind_sigtramp_frame_sniffer, libunwind_get_reg_special): Likewise.
        * iq2000-tdep.c (iq2000_breakpoint_from_pc): Likewise.
        * coffread.c (process_coff_symbol): Likewise.
        * arm-tdep.c (convert_from_extended, convert_to_extended)
        (gdb_print_insn_arm): Likewise.

2007-05-31  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (NUM_REGS): Replace by gdbarch_num_regs.
        * i386-tdep.c (i386_dbx_reg_to_regnum)
        (i386_svr4_reg_to_regnum): Likewise.
        * inf-ptrace.c (inf_ptrace_fetch_registers)
        (inf_ptrace_store_registers): Likewise.
        * corelow.c (get_core_registers): Likewise.
        * i386-linux-nat.c (supply_gregset, fill_gregset)
        (i386_linux_fetch_inferior_registers)
        (i386_linux_store_inferior_registers): Likewise.
        * remote.c (init_remote_state,packet_reg_from_regnum)
        (packet_reg_from_pnum,process_g_packet,remote_fetch_registers)
        (remote_prepare_to_store,store_registers_using_G)
        (remote_store_registers,remote_arch_state): Likewise.
        * tracepoint.c (encode_actions): Likewise.
        * mi/mi-main.c (mi_cmd_data_list_register_names)
        (mi_cmd_data_list_changed_registers,mi_cmd_data_list_register_values)
        (mi_cmd_data_write_register_values): Likewise.
        * tui/tui-regs.c (tui_show_register_group)
        (tui_show_register_group): Likewise.
        * xtensa-tdep.h (FP_ALIAS): Likewise.
        * xtensa-tdep.c (xtensa_register_name,xtensa_register_type)
        (xtensa_reg_to_regnum,xtensa_pseudo_register_read)
        (xtensa_pseudo_register_write,xtensa_register_reggroup_p): Likewise.
        * win32-nat.c (do_win32_fetch_inferior_registers)
        (do_win32_store_inferior_registers,fetch_elf_core_registers
        * user-regs.h: Likewise (comment).
        * user-regs.c (user_reg, user_reg_map_name_to_regnum): Likewise.
        * trad-frame.c (trad_frame_alloc_saved_regs): Likewise.
        * target-descriptions.h: Likewise (comment).
        * target-descriptions.c (tdesc_use_registers): Likewise (comment).
        * target.c (debug_print_register): Likewise.
        * stack.c (frame_info): Likewise.
        * stabsread.c (define_symbol): Likewise.
        * sh64-tdep.c (sh64_do_pseudo_register,sh64_print_register)
        (sh64_media_print_registers_info)
        (sh64_compact_print_registers_info): Likewise.
        * rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
        * rs6000-nat.c (fetch_register,store_register): Likewise.
        * remote-sim.c (one2one_register_sim_regno,gdbsim_fetch_register)
        (gdbsim_fetch_register,gdbsim_store_register): Likewise.
        * remote-mips.c (mips_fetch_registers,mips_store_registers): Likewise.
        * remote-m32r-sdi.c (m32r_fetch_registers)
        (m32r_store_registers): Likewise.
        * reggroups.c (default_register_reggroup_p): Likewise.
        * regcache.c (init_regcache_descr,register_size,regcache,regcache_save)
        (regcache_restore,regcache_dump): Likewise.
        * monitor.c (monitor_fetch_registers,monitor_store_registers): Likewise.
        * mips-tdep.c (mips_xfer_register,mips_register_name)
        (mips_register_reggroup_p,mips_pseudo_register_read)
        (mips_pseudo_register_write,mips_convert_register_p,mips_register_type)
        (mips_unwind_pc,mips_unwind_sp,mips_unwind_dummy_id,set_reg_offset)
        (mips16_scan_prologue,mips_insn16_frame_cache,reset_saved_regs)
        (mips32_scan_prologue,mips_insn32_frame_cache,read_next_frame_reg)
        (mips_n32n64_return_value,mips_o32_return_value,mips_o64_return_value)
        (print_gp_register_row,mips_print_registers_info)
        (mips_stab_reg_to_regnum,mips_dwarf_dwarf2_ecoff_reg_to_regnum)
        (mips_register_sim_regno): Likewise.
        * mips-linux-tdep.c (mips_linux_o32_sigframe_init)
        (mips_linux_n32n64_sigframe_init): Likewise.
        * mips-linux-nat.c (mips_linux_register_addr)
        (mips64_linux_register_addr): Likewise.
        * findvar.c (value_of_register): Likewise.
        * infcmd.c (default_print_registers_info,registers_info)
        (print_vector_info,print_float_info): Likewise.
        * mips64obsd-tdep.c (mips64obsd_sigframe_init): Likewise.
        * inf-child.c (inf_child_fetch_inferior_registers): Likewise.
        * m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.
        * m68hc11-tdep.c (m68hc11_frame_unwind_cache(: Likewise.
        * m32r-tdep.c (m32r_frame_unwind_cache): Likewise.
        * ia64-linux-nat.c (ia64_register_addr,ia64_cannot_fetch_register)
        (ia64_cannot_store_register,ia64_linux_fetch_registers)
        (ia64_linux_store_registers): Likewise.
        * hpux-thread.c (hpux_thread_fetch_registers)
        (hpux_thread_store_registers): Likewise.
        * h8300-tdep.c (E_PSEUDO_CCR_REGNUM,E_PSEUDO_EXR_REGNUM)
        (h8300_init_frame_cache,h8300_frame_cache,h8300_frame_prev_register)
        (h8300_register_type): Likewise.
        * dwarf2-frame.c (dwarf2_frame_cache)
        (dwarf2_frame_state_alloc_regs): Likewise.
        * cris-tdep.c (cris_register_size,cris_cannot_fetch_register)
        (cris_cannot_store_register,crisv32_cannot_fetch_register)
        (crisv32_cannot_store_register,cris_register_name): Likewise.
        * avr-tdep.c (avr_frame_unwind_cache): Likewise.
        * arch-utils.c (legacy_register_sim_regno)
        (legacy_virtual_frame_pointer): Likewise.
        * arm-tdep.c (arm_make_prologue_cache,arm_register_sim_regno):Likewise.
        * arm-tdep.h: Likewise (comment).
        * frv-tdep.c (frv_register_sim_regno): Likewise.
        * m68klinux-nat.c (old_fetch_inferior_registers)
        (old_store_inferior_registers): Likewise.
        * m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
        * irix5-nat.c (fetch_core_registers): Likewise.
        * hppa-tdep.c (hppa_frame_cache): Likewise.
        * hppa-linux-nat.c (hppa_linux_register_addr)
        (hppa_linux_fetch_inferior_registers)
        (hppa_linux_store_inferior_registers): Likewise.
        * hppa-hpux-nat.c (hppa_hpux_fetch_inferior_registers)
        (hppa_hpux_store_inferior_registers): Likewise.
        * amd64-nat.c (amd64_native_gregset_reg_offset)
        (amd64_supply_native_gregset,amd64_collect_native_gregset): Likewise.
        * dbug-rom.c (dbug_regname): Likewise.
        * m68hc11-tdep.c (m68hc11_frame_unwind_cache)
        (HARD_PAGE_REGNUM (comment)): Likewise.
        * gdbarch.sh (NUM_PSEUDO_REGS): Replace by gdbarch_num_pseudo_regs.
        * i386-tdep.c (i386_dbx_reg_to_regnum)
        (i386_svr4_reg_to_regnum): Likewise.
        * mi/mi-main.c (mi_cmd_data_list_register_names)
        (mi_cmd_data_list_changed_registers,mi_cmd_data_list_register_values)
        (mi_cmd_data_write_register_values): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.
        * tui/tui-regs.c (tui_show_register_group): Likewise.
        * xtensa-tdep.h (FP_ALIAS): Likewise.
        * user-regs.h: Likewise (comment).
        * user-regs.c (user_reg, user_reg_map_name_to_regnum): Likewise.
        * trad-frame.c (trad_frame_alloc_saved_regs): Likewise.
        * target-descriptions.h: Likewise (comment).
        * target.c (debug_print_register): Likewise.
        * stack.c (frame_info): Likewise.
        * stabsread.c (define_symbol): Likewise.
        * sh64-tdep.c (sh64_print_register,sh64_media_print_registers_info)
        (sh64_compact_print_registers_info): Likewise.
        * rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
        * regcache.c (init_regcache_descr,register_size,regcache,regcache_save
        (regcache_restore,regcache_dump): Likewise.
        * mips-tdep.c (print_gp_register_row,mips_print_registers_info)
        (mips_dwarf_dwarf2_ecoff_reg_to_regnum)
        (mips_stab_reg_to_regnum): Likewise.
        * findvar.c (value_of_register): Likewise.
        * infcmd.c (default_print_registers_info,registers_info)
        (print_vector_info,print_float_info): Likewise.
        * m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.
        * h8300-tdep.c (h8300_register_type): Likewise.
        * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
        * frame.h (SIZEOF_FRAME_SAVED_REGS): Likewise.
        * xtensa-tdep.c (xtensa_register_type,xtensa_reg_to_regnum)
        (xtensa_pseudo_register_read,xtensa_pseudo_register_write): Likewise.
        * parse.c: Remove comment.
        * gdbarch.c, gdbarch.h: Regenerate

2007-05-31  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (CANNOT_FETCH_REGISTER): Replace by
        gdbarch_cannot_fetch_register.
        * alpha-nat.c (fetch_osf_core_registers): Likewise.
        * hppa-linux-nat.c (fetch_register): Likewise.
        * inf-ptrace.c (inf_ptrace_fetch_register): Likewise.
        * m68klinux-nat.c (fetch_register): Likewise.
        * mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_supply_fpreg):
        Likewise.
        * gdbarch.sh (CANNOT_STORE_REGISTER): Replace by
        gdbarch_cannot_store_register.
        * hppa-linux-nat.c (store_register): Likewise.
        * inf-ptrace.c (inf_ptrace_store_register): Likewise.
        * regcache.c (regcache_raw_write): Likewise.
        * m68klinux-nat.c (store_register): Likewise.
        * mipsnbsd-tdep.c (mipsnbsd_fill_reg, mipsnbsd_fill_fpreg): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-05-31  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_OSABI): Replace by gdbarch_osabi.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-05-31  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_CHAR_SIGNED): Replace by gdbarch_char_signed.
        * gdbtypes.c (build_gdbtypes, gdbtypes_post_init): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-05-31  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (TARGET_BYTE_ORDER): Replace by gdbarch_byte_order.
        * ax-gdb.c (gen_bitfield_ref): Likewise.
        * mi/mi-main.c (get_register): Likewise.
        * findvar.c (default_value_from_register, extract_signed_integer)
        (extract_unsigned_integer, extract_long_unsigned_integer)
        (store_signed_integer, store_unsigned_integer): Likewise.
        * regcache.c (regcache_dump): Likewise.
        * value.c (lookup_internalvar, value_of_internalvar)
        (set_internalvar): Likewise.
        * defs.h: Likewise.
        * valprint.c (print_binary_chars, print_octal_chars)
        (print_decimal_chars, print_hex_chars, print_char_chars): Likewise.
        * infcmd.c (default_print_registers_info): Likewise.
        * arch-utils.c (selected_byte_order, show_endian): Likewise.
        * stabsread.c (define_symbol): Likewise.
        * doublest.c (floatformat_from_length, floatformat_from_type)
        (extract_typed_floating, store_typed_floating): Likewise.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-05-31  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (CALL_DUMMY_LOCATION): Replace by
        gdbarch_call_dummy_location.
        * infcall.c (call_function_by_hand): Likewise.
        * inferior.h: Change comment.
        * arch-utils.c: Change comment.
        * gdbarch.c, gdbarch.h: Regenerate.

2007-05-28  Joel Brobecker  <brobecker@adacore.com>

        * solib-aix5.c: Delete.
        * Makefile.in (solib-aix5.o): Delete rule.

2007-05-23  Daniel Jacobowitz  <dan@codesourcery.com>

        * breakpoint.h (enum bpstat_what_main_action): Remove
        BPSTAT_WHAT_THROUGH_SIGTRAMP.
        * infrun.c (process_event_stop_test): Do not check for it.

2007-05-22  Chris Dearman  <chris@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * ser-unix.c (show_serial_hwflow): New function.
        (hardwire_raw): Add hardware flow control support.
        (_initialize_ser_hardwire): Add "set/show remoteflow".
        * Makefile.in (ser-unix.o): Depend on $(gdbcmd_h).
        * NEWS: Document the new command.

2007-05-21  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/i386/tm-linux.h (sys_quotactl): Do not define.
        * configure.ac (sys_quotactl, START_INFERIOR_TRAPS_EXPECTED): Do not
        define for i[[3456]]86-*-linux* native configurations.
        * config.in, configure: Regenerate.

2007-05-19  Joel Brobecker  <brobecker@adacore.com>

        * rs6000-nat.c (xcoff_relocate_symtab): Do nothing if debugging
        a core file. Add comment in the function description.

2007-05-18  Caroline Tice  <ctice@apple.com>

        * c-valprint.c (c_value_print):  If the initialized field of the
        value struct is 0, print out "[uninitialized]" before the value.
        * dwarf2expr.c (execute_stack_op): Initialize ctx->initialized field; 
        allow DW_OP_GNU_uninit as legal op following a DW_OP_reg op or a 
        DW_OP_regx op; add case for DW_OP_GNU_uninit and update
        ctx->initialized appropriately. Verify no location op follows
        DW_OP_GNU_uninit.
        * dwarf2expr.h (struct dwarf_expr_context): New field, initialized.
        * dwarf2loc.c (dwarf2_evaluate_loc_desc): Add call to 
        set_value_initialized.
        * dwarf2read.c (dwarf_stack_op_name): Add case for DW_OP_GNU_uninit.
        (decode_locdesc): Add case for DW_OP_GNU_uninit.
        * value.c (struct value):  New field, initialized.
        (allocate_value): Initialize new field.
        (set_value_initialized): New function.
        (value_initialized): New function.
        * value.h (value_initialized): New extern declaration.
        (set_value_initialized): Likewise.
        
2007-05-18  Caroline Tice  <ctice@apple.com>

        * MAINTAINERS (Write After Approval): Add self.
        
2007-05-17  Joel Brobecker  <brobecker@adacore.com>

        * gdbtypes.c (make_reference_type): Preserve the type chain
        and set the length of all the variants of the pointer type.

2007-05-17  Joel Brobecker  <brobecker@adacore.com>

        * gdbtypes.c (make_pointer_type): Preserve the pointer type chain
        and set the length of all the variants of the pointer type.

2007-05-17  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_n32n64_push_dummy_call): Fix and reformat a
        comment.
        (mips_o64_push_dummy_call): Reformat a comment.

2007-05-17  Qinwei  <qinwei@sunnorth.com.cn>

        * score-tdep.c (score_frame_cache->fp, score_analyze_prologue)
        (score_prologue_frame_base_address): Return fp to keep gdb print
        local variables correctly when debugging information is stabs.

        (score_analyze_prologue): For software watchpoint, fetch all the
        instructions from range [startaddr, pc] once and identify them locally
        to reduce memory access.
        (score_malloc_and_get_memblock, score_free_memblock)
        (score_adjust_memblock_ptr): New functions.
        (score_fetch_inst): Fetch single instruction or mutiple instructions.

        (score_target_can_use_watch, score_stopped_by_watch)
        (score_target_insert_watchpoint, score_target_remove_watchpoint)
        (score_target_insert_hw_breakpoint, score_target_remove_hw_breakpoint):
        New functions for remote & local hw-watchpoint and hw-breakpoint.

2007-05-16  Alfred M. Szmidt  <ams@gnu.org>

        * reply_mig_hack.awk: Check for `auto const mach_msg_type_t'
        declarations as well.

2007-05-16  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/arm/embed.mt (DEPRECATED_TM_FILE): Set to tm-arm.h.
        * config/arm/tm-embed.h: Delete file.

        * arm-tdep.h (arm_software_single_step): Declare.
        * arm-tdep.c (arm_software_single_step): Make global.
        (arm_gdbarch_init): Move set_gdbarch_software_single_step call
        from here to ...
        * arm-linux-tdep.c (arm_linux_init_abi): ... here ...
        * armnbsd-tdep.c (arm_netbsd_init_abi_common): ... here ...
        * armobsd-tdep.c (armobsd_init_abi): ... here ...
        * arm-wince-tdep.c (arm_wince_init_abi): ... and here.

        * arm-tdep.c (ARM_LE_BREAKPOINT, ARM_BE_BREAKPOINT): No longer
        allow defines to be overriden by TM file.
        (THUMB_LE_BREAKPOINT, THUMB_BE_BREAKPOINT): Likewise.  Also,
        change default to {0xbe,0xbe}.
        * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint,
        arm_obsd_thumb_be_breakpoint): New global variables.
        (armobsd_init_abi): Override tdep->thumb_breakpoint and
        tdep->thumb_breakpoint_size.
        * arm-wince-tdep.c (arm_wince_thumb_le_breakpoint): New variable.
        (arm_wince_init_abi): Override tdep->thumb_breakpoint and 
        tdep->thumb_breakpoint_size.

        * arm-tdep.c (arm_gdbarch_init): Add set_gdbarch_skip_trampoline_code.

2007-05-16  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Mention removed "set mips stack-arg-size" and "set mips
        saved-gpreg-size".

        * mips-tdep.c (MIPS32_REGSIZE, MIPS64_REGSIZE): New constants.
        (size_auto, size_32, size_64, size_enums, mips_abi_regsize_string)
        (mips_stack_argsize_string, mips_stack_argsize): Delete.
        (mips_abi_regsize): Simplify.
        (mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call)
        (mips_n32n64_return_value, mips_o32_push_dummy_call)
        (mips_o32_return_value, mips_o64_push_dummy_call)
        (mips_o64_return_value): Propogate constant register sizes.  Use the
        ABI register size instead of mips_stack_argsize.
        (mips_dump_tdep): Don't print mips_stack_argsize.
        (_initialize_mips_tdep): Remove saved-gpreg-size and stack-arg-size
        settings.

2007-05-16  Daniel Jacobowitz  <dan@codesourcery.com>

        * config/mips/linux.mt (DEPRECATED_TM_FILE): Delete.
        * config/mips/tm-linux.h: Delete.
        * mips-linux-tdep.c (mips_svr4_so_ops): New.
        (mips_linux_in_dynsym_resolve_code): Make static.  Use
        svr4_in_dynsym_resolve_code.
        (mips_linux_init_abi): Initialize mips_svr4_so_ops.  Call
        set_solib_ops.
        * solib-svr4.c (svr4_in_dynsym_resolve_code, svr4_so_ops): Make
        global.
        * solib-svr4.h (svr4_so_ops, svr4_in_dynsym_resolve_code): Declare.
        * Makefile.in (mips-linux-tdep.o): Update.
        * solib.c (set_solib_ops): New.
        (current_target_so_ops): Update comment.
        * solib.h (set_solib_ops): New prototype.

2007-05-16  Chris Dearman  <chris@mips.com>

        * printcmd.c (do_examine): Fix typos in a comment.

2007-05-16  Richard Sandiford  <richard@codesourcery.com>

        * configure.ac: Allow sysroots to be relocated under $prefix as
        well as $exec_prefix.
        * configure: Regenerate.

2007-05-14  Ulrich Weigand  <uweigand@de.ibm.com>

        * hppa-hpux-tdep.c: Do not include <dl.h> or <machine/save_state.h>.
        (offsetof): Do not define.
        (find_stub_with_shl_get): Use numerical value 3 instead of
        symbolic value TYPE_PROCEDURE.

2007-05-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * gdb_proc_service.h (paddr_t): Delete typedef.
        * proc-service.c (ps_addr_to_core_addr, core_addr_to_ps_addr): New.
        (ps_xfer_memory): Take a psaddr_t.  Use ps_addr_to_core_addr.
        (ps_pglobal_lookup): Take a psaddr_t *.  Use core_addr_to_ps_addr.
        (ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite): Take a psaddr_t.
        * sol-thread.c (gdb_ps_addr_t): Use psaddr_t instead of paddr_t.
        * Makefile.in (proc-service.o): Update.

2007-05-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (mips-tdep.o): Update.
        * mips-tdep.c (mips_gdbarch_init): Register the dwarf2 CFI
        unwinder.

2007-05-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2-frame.c (dwarf2_frame_prev_register): Use pack_long
        instead of store_typed_address.
        * value.c (pack_long): New.
        (value_from_longest): Use it.
        * value.h (pack_long): New prototype.

2007-05-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2-frame.c (read_encoded_value): Correct typo.  Use
        DW_EH_PE_signed if appropriate.

2007-05-14  Paul Brook  <paul@codesourcery.com>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2read.c (dwarf2_debug_line_missing_file_complaint): New
        function.
        (dwarf_decode_lines): Check for line info without a file.

2007-05-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * linux-thread-db.c (thread_db_pid_to_str): Print thread IDs
        as hexadecimal.

2007-05-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * jv-exp.y (push_fieldnames): Use STRUCTOP_PTR instead of
        STRUCTOP_STRUCT.
        * jv-lang.c (evaluate_subexp_java): Handle STRUCTOP_PTR instead of
        STRUCTOP_STRUCT.
        * jv-typeprint.c (java_print_type): Do not crash on NULL varstring.

2007-05-14  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (read_sp): Remove.
        * gdbarch.c, gdbarch.h: Regenerate.
        * frame.c (frame_sp_unwind): Do not call TARGET_READ_SP.

        * avr-tdep.c (avr_read_sp): Remove.
        (avr_unwind_sp): New function.
        (avr_gdbarch_init): Install unwind_sp instead of read_sp callback.
        * mips-tdep.c (mips_read_sp): Remove.
        (mips_unwind_sp): New function.
        (mips_gdbarch_init): Install unwind_sp instead of read_sp callback.
        * score-tdep.c (score_read_unsigned_register): Remove.
        (score_read_sp): Remove.
        (score_unwind_sp): New function.
        (score_gdbarch_init): Install unwind_sp instead of read_sp callback.

2007-05-14  Maxim Grigoriev  <maxim2405@gmail.com>

        * buildsym.c (start_subfile): Handle absolute pathnames
        while comparing subfile names.

2007-05-13  Ulrich Weigand  <uweigand@de.ibm.com>

        * hppa-hpux-tdep.c: Include "regcache.h".
        * hppa-linux-tdep.c: Likewise.
        * hppa-tdep.c: Include "gdb_stdint.h".
        (find_unwind_entry): Cast host pointer to uintptr_t before passing
        it to paddr_nz.
        * Makefile.in: Update dependencies.

2007-05-13  Ulrich Weigand  <uweigand@de.ibm.com>

        * blockframe.c: Remove obsolete comments.
        * alpha-nat.c (fetch_osf_core_registers): Update comment.
        * arm-tdep.h (enum gdb_regnum): Remove obsolete part of comment.
        * hppa-tdep.h (enum hppa_regnum): Likewise.
        * mips-tdep.h: Likewise.
        * m68hc11-tdep.c: Likewise.

2007-05-13  Ulrich Weigand  <uweigand@de.ibm.com>

        * inferior.h (read_sp): Remove prototype.
        * regcache.c (read_sp): Remove.
        * gcore.c (derive_stack_segment): Use get_frame_sp instead of read_sp.
        * infcall.c (call_function_by_hand): Likewise.
        * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Use regcache instead
        of calling read_sp.
        * rs6000-tdep.c (rs6000_push_dummy_call): Likewise.

2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * i386-linux-nat.c (i386_linux_resume): Use regcache functions 
        instead of read_register and read_register_pid.

        * ia64-linux-nat.c (enable_watchpoints_in_psr): Use REGCACHE 
        argument instead of PTID.  Use regcache functions instead of
        read_register_pid.
        (ia64_linux_insert_watchpoint): Update call.
        (ia64_linux_stopped_data_address): Use regcache functions
        instead of read_register_pid and write_register_pid.

2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * libunwind-frame.h (struct regcache): Add forward declaration.
        (libunwind_get_reg_special): Add REGCACHE argument.
        * libunwind-frame.c (libunwind_get_reg_special): Add REGCACHE
        argument.  Pass it to unw_init_remote_p.

        * ia64-tdep.c (ia64_pseudo_register_read): Pass regcache to
        libunwind_get_reg_special.
        (ia64_access_reg): Remove "write" case.
        (ia64_access_fpreg): Likewise.  Read from next_frame passed
        as callback argument instead of from current_regcache.
        (ia64_access_rse_reg): Remove "write" case.  Read from regcache
        passed as callback argument instead of from current_regcache.
        (ia64_access_rse_fpreg): New function.
        (ia64_unw_rse_acce): Use it instead of ia64_access_fpreg.

2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * NEWS: Mention SPU overlay support.

2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-tdep.c (spu_frame_unwind_cache): Add comment.

2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * breakpoint.c (remove_breakpoint): Do not remove software
        breakpoints in unmapped overlay sections.

2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-tdep.c: Include "observer.h".
        (spu_frame_unwind_cache): Unwind PC through overlay return stubs.
        (spu_overlay_data): New variable.
        (struct spu_overlay_table): New type.
        (spu_get_overlay_table, spu_overlay_update_osect, spu_overlay_update,
        spu_overlay_new_objfile): New functions.
        (spu_gdbarch_init): Install spu_overlay_update.
        (_initialize_spu_tdep): Register spu_overlay_new_objfile, 
        allocate spu_overlay_data objfile data.

2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (overlay_update): New gdbarch function.
        (struct obj_section): Add forward declaration.
        * gdbarch.c, gdbarch.h: Regenerate.

        * symfile.c (simple_overlay_update): Make global.
        (target_overlay_update): Remove variable.
        (overlay_is_mapped): Call gdbarch_overlay_update instead of
        target_overlay_update.
        (overlay_load_command): Likewise.
        * symfile.h (struct obj_section): Add forward declaration.
        (simple_overlay_update): Add prototype.

        * m32r-tdep.c (m32r_gdbarch_init): Install simple_overlay_update.

2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * observer.sh: Add "struct objfile" forward declaration.
        * target.h (deprecated_target_new_objfile_hook): Remove.
        * symfile.c (deprecated_target_new_objfile_hook): Remove.
        (clear_symtab_users): Call observer_notify_new_objfile.
        (symbol_file_add_with_addrs_or_offsets): Likewise.
        * rs6000-nat.c: Include "observer.h".
        (vmap_ldinfo): Call observer_notify_new_objfile.
        (xcoff_relocate_core): Likewise.
        * remote.c (remote_new_objfile_chain): Remove.
        (remote_new_objfile): Do not call remote_new_objfile_chain.
        (_initialize_remote): Use observer_attach_new_objfile.
        * tui/tui-hooks.c (tui_target_new_objfile_chain): Remove.
        (tui_new_objfile_hook): Do not call tui_target_new_objfile_chain.
        (_initialize_tui_hooks): Use observer_attach_new_objfile.
        * aix-thread.c: Include "observer.h".
        (target_new_objfile_chain): Remove.
        (new_objfile): Do not call target_new_objfile_chain.
        (_initialize_aix_thread): Use observer_attach_new_objfile.
        * hpux-thread.c: Include "observer.h"
        (target_new_objfile_chain): Remove.
        (hpux_thread_new_objfile): Make static.  Do not call
        target_new_objfile_chain.
        (_initialize_hpux_thread): Use observer_attach_new_objfile.
        * linux-thread-db.c: Include "observer.h".
        (target_new_objfile_chain): Remove.
        (thread_db_new_objfile): Do not call target_new_objfile_chain.
        (_initialize_thread_db): Use observer_attach_new_objfile.
        * sol-thread.c: Include "observer.h".
        (target_new_objfile_chain): Remove.
        (sol_thread_new_objfile): Make static.  Do not call
        target_new_objfile_chain.
        (_initialize_sol_thread): Use observer_attach_new_objfile.
        * Makefile.in (aix-thread.o, hpux-thread.o, linux-thread-db.o,
        rs6000-nat.o, sol-thread.o, tui-hooks.o): Add dependency on
        $(observer_h).

2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (remote_translate_xfer_address): Remove.
        * gdbarch.h, gdbarch.c: Regenerate.
        * arch-utils.c (generic_remote_translate_xfer_address): Remove.
        * arch-utils.h (generic_remote_translate_xfer_address): Remove.
        * remote.c (remote_write_bytes_aux, remote_read_bytes): Do not
        call gdbarch_remote_translate_xfer_address.
        * frv-tdep.c (frv_gdbarch_init): Do not call
        set_gdbarch_remote_translate_xfer_address.
        * ia64-tdep.c (ia64_remote_translate_xfer_address): Remove.
        (ia64_gdbarch_init): Do not install it.

2007-05-11  Bob Wilson  <bob.wilson@acm.org>

        * NEWS: Mention change in handling the -tui option.

2007-05-11  Daniel Jacobowitz  <dan@codesourcery.com>

        * linux-thread-db.c (enable_thread_event_reporting): Fix comment
        typo.

2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * breakpoint.c (single_step_breakpoint_inserted_here_p): New function.
        (breakpoint_inserted_here_p): Call it.
        (software_breakpoint_inserted_here_p): Likewise.

2007-05-10  Ulrich Weigand  <uweigand@de.ibm.com>

        * inf-ptrace.c (inf_ptrace_register_u_offset): Adapt parameter list.
        (inf_ptrace_fetch_register): Add register_u_offset callback parameters
        GDBARCH and STORE_P.  Handle callback (CORE_ADDR) -1 return value.
        (inf_ptrace_store_register): Likewise.
        (inf_ptrace_trad_target): Adapt register_u_offset parameter list.
        * inf-ptrace.h (inf_ptrace_trad_target): Likewise.

        * vax-nat.c (vax_register_u_offset): Adapt parameter list.

        * linux-nat.c (linux_trad_target): Adapt parameter list.
        * linux-nat.h (linux_trad_target): Likewise.

        * alpha-linux-nat.c (alpha_linux_register_u_offset): Adapt parameters.

        * mips-linux-nat.c (mips_linux_cannot_fetch_register): Remove.
        (mips_linux_cannot_store_register): Likewise.
        (mips_linux_register_addr): Add GDBARCH and STORE_P parameters.
        Return (CORE_ADDR) -1 for registers that cannot be fetched or
        stored via ptrace.  Use GDBARCH instead of current_gdbarch.
        (mips64_linux_register_addr): Likewise.
        (mips_linux_register_u_offset): Adapt parameter list.  Pass
        GDBARCH and STORE_P on to mips{64}_linux_register_addr.

        * config/mips/linux.mh (NAT_FILE): Set to config/nm-linux.h.
        * config/mips/nm-linux.h: Delete file.

2007-05-10  Pedro Alves  <pedro_alves@portugalmail.pt>

        * remote.c (remote_detach): Error out if remote can't detach.

2007-05-10  Luis Machado  <luisgpm@br.ibm.com>

        * rs6000-tdep.c: (deal_with_atomic_sequence) Stores branch
        instruction's opcode in the "opcode" variable and declares new
        variable "closing_insn".

2007-05-10  Chris Dearman  <chris@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * cli/cli-setshow.c (do_setshow_command): Remove trailing
        whitespace when setting a var_filename.

2007-05-09  Bob Wilson  <bob.wilson@acm.org>
        
        * main.c (captured_main): Recognize -tui option and print an error
        message when the TUI is not configured.
        
2007-05-09  Andreas Schwab  <schwab@suse.de>

        * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Don't
        set removed members.
        (mipsnbsd_lp64_fetch_link_map_offsets): Likewise.

2007-05-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (deprecated_store_struct_return): Remove.
        * gdbarch.c, gdbarch.h: Regenerate.
        * frv-tdep.c (frv_store_struct_return): Remove.
        (frv_gdbarch_init): Do not install it.

2007-05-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/i386/nm-i386sol2.h (USE_PROC_FS): Do not define.
        * config/mips/nm-irix5.h (USE_PROC_FS): Do not define.
        * config/nm-linux.h (USE_PROC_FS): Do not undefine.

2007-05-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-linux-nat.c: Include "gdb_stdint.h".
        (fetch_ppc_register): Use uint64_t instead of unsigned long long.
        (fetch_ppc_memory_1, store_ppc_memory_1): Likewise.
        (fetch_ppc_memory, store_ppc_memory): Fix coding style.
        (spu_symbol_file_add_from_memory): Use strtoulst instead of sscanf.
        (spu_child_wait): Mark up string for translation.

2007-05-08  Paul Gilliam  <pgilliam@us.ibm.com>
            Luis Machado  <luisgpm@br.ibm.com>

        * rs6000-tdep.c: (LWARX_MASK, LWARX_INSTRUCTION, LDARX_INSTRUCTION,
        STWCX_MASK, STWCX_INSTRUCTION, STDCX_INSTRUCTION, BC_MASK,
        BC_INSTRUCTION): Define.
        (deal_with_atomic_sequence): New function.
        (rs6000_software_single_step): Call deal_with_atomic_sequence.
        (rs6000_gdbarch_init): Install deal_with_atomic_sequence as
        gdbarch_software_single_step routine.

2007-05-07  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-linux-nat.c (fetch_ppc_register, fetch_ppc_memory_1,
        store_ppc_memory_1, fetch_ppc_memory, store_ppc_memory,
        parse_spufs_run, spu_bfd_iovec_pread, spu_bfd_open,
        spu_symbol_file_add_from_memory, spu_child_post_startup_inferior,
        spu_child_post_attach, spu_fetch_inferior_registers,
        spu_store_inferior_registers, spu_xfer_partial): Store PPE-side
        memory addresses as ULONGEST, not CORE_ADDR.

2007-05-07  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh: Add skip_permanent_breakpoint callback.
        * gdbarch.h, gdbarch.c: Regenerate.

        * infrun.c (SKIP_PERMANENT_BREAKPOINT): Remove default definition.
        (resume): Call gdbarch_skip_permanent_breakpoint instead of
        SKIP_PERMANENT_BREAKPOINT.  Inline default case.

        * hppa-hpux-tdep.c (hppa_skip_permanent_breakpoint): Make static.
        Add REGCACHE argument.  Use it instead of read/write_register.
        (hppa_hpux_init_abi): Install hppa_skip_permanent_breakpoint.

        * config/pa/tm-hppah.h: Delete file.
        * config/pa/hppa64.mt (DEPRECATED_TM_FILE): Set to tm-hppa.h.
        * config/pa/hppahpux.mt (DEPRECATED_TM_FILE): Likewise.

2007-05-07  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (c-lang.o, gnu-v3-abi.o): Update.
        * NEWS: Mention improved C++ thunk support.
        * c-lang.c (cplus_language_defn): Mention cplus_skip_trampoline.
        * cp-abi.c (cplus_skip_trampoline): New.
        * cp-abi.h (cplus_skip_trampoline): New prototype.
        (struct cp_abi_ops): Add skip_trampoline member.
        * gnu-v3-abi.c (gnuv3_skip_trampoline): New.
        (init_gnuv3_ops): Set skip_trampoline.

2007-05-06  Daniel Jacobowitz  <dan@codesourcery.com>

        * rs6000-tdep.c (struct frame_extra_info): Delete.

2007-05-06  Daniel Jacobowitz  <dan@codesourcery.com>

        * linux-thread-db.c: Update some FIXME comments.
        (thread_db_xfer_partial): Delete.
        (init_thread_db_ops): Do not set to_xfer_partial.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * inftarg.c, infptrace.c: Remove files.
        * Makefile.in (ALLDEPFILES): Remove inftarg.c and infptrace.c
        (inftarg.o, infptrace.o): Remove rules.
        * gdbcore.h (register_addr): Remove prototype.
        * inferior.h (kill_inferior, store_inferior_registers,
        fetch_inferior_registers, attach, detach, ptrace_wait, child_resume,
        call_ptrace, pre_fork_inferior): Remove prototypes.
        * target.h (child_xfer_memory, child_pid_to_exec_file, 
        child_core_file_to_sym_file, child_post_attach,
        child_post_startup_inferior, child_acknowledge_created_inferior,
        child_insert_fork_catchpoint, child_remove_fork_catchpoint,
        child_insert_vfork_catchpoint, child_remove_vfork_catchpoint,
        child_insert_exec_catchpoint, child_remove_exec_catchpoint,
        child_follow_fork, child_reported_exec_events_per_exec_call,
        child_has_exited, child_thread_alive): Remove prototypes.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * sparc-nat.h (sparc_fetch_inferior_registers): Add prototype.
        (sparc_store_inferior_registers): Likewise.
        * sparc-nat.c (fetch_inferior_registers): Rename to ...
        (sparc_fetch_inferior_registers): ... this.
        (store_inferior_registers): Rename to ...
        (sparc_store_inferior_registers): ... this.
        (sparc_target): Update callback names.
        * sparc-linux.nat.c (_initialize_sparc_linux_nat): Likewise. 
        * sparc64-linux.nat.c (_initialize_sparc64_linux_nat): Likewise. 

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * linux-nat.c (child_post_attach): Rename to ...
        (linux_child_post_attach): ... this.  Make static.
        (child_follow_fork): Rename to ...
        (linux_child_follow_fork): ... this.  Make static.
        (child_insert_fork_catchpoint): Rename to ...
        (linux_child_insert_fork_catchpoint): ... this.  Make static.
        (child_insert_vfork_catchpoint): Rename to ...
        (linux_child_insert_vfork_catchpoint): ... this.  Make static.
        (child_insert_exec_catchpoint): Rename to ...
        (linux_child_insert_exec_catchpoint): ... this.  Make static.
        (child_pid_to_exec_file): Rename to ...
        (linux_child_pid_to_exec_file): ... this.  Make static.
        Add prototype.
        (linux_handle_extended_wait): Update call.
        (linux_xfer_partial): Update callback routine names.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * configure.host (alpha*-*-osf[12]*): Remove support.
        * NEWS: Mention removed configurations.

        * config/alpha/alpha-osf1.mh: Delete file.
        * config/alpha/alpha-osf2.mh: Delete file.
        * config/alpha/alpha-osf3.mh (NATDEPFILES): Remove inftarg.o
        and infptrace.o.
        * config/alpha/nm-osf.h: Delete file.
        * config/alpha/nm-osf2.h: Delete file.
        * config/alpha/nm-osf3.h: Do not include "nm-osf2.h".
        (START_INFERIOR_TRAPS_EXPECTED): Copy from nm-osf.h.
        (PROCFS_DONT_TRACE_FAULTS): Copy from nm-osf2.h.

        * alpha-nat.c (ALPHA_UNIQUE_PTRACE_ADDR): Do not define.
        (register_addr, kernel_u_size): Remove.
        Do not check for "defined(USE_PROC_FS) || defined(HAVE_GREGSET_T)".

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * regcache.c (regcache_invalidate): New function.
        (register_cached): Remove.
        (set_register_cached): Remove.
        (deprecated_registers_fetched): Remove.
        (registers_changed): Use regcache_invalidate instead
        of set_register_cached.
        (regcache_raw_read): Update comment.

        * regcache.h (regcache_invalidate): Add prototype.
        (register_cached): Remove.
        (set_register_cached): Remove.
        (deprecated_registers_fetched): Remove.

        * findvar.c (value_of_register): Do not call register_cached.
        * frame.c (frame_register): Likewise.
        * tui/tui-regs.c (tui_get_register): Likewise.

        * remote.c (fetch_register_using_p): Do not call set_register_cached.
        (process_g_packet): Likewise.
        (remote_fetch_registers): Likewise.
        * remote-sim.c (gdbsim_fetch_register): Likewise.
        * mt-tdep.c (mt_select_coprocessor): Replace set_register_cached call
        by regcache_invalidate.
        (mt_pseudo_register_write): Likewise.
        * sh-tdep.c (sh_pseudo_register_write): Likewise.

        * corelow.c (get_core_registers): Replace deprecated_registers_fetched
        call by loop over regcache_raw_supply (..., NULL).

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * target.h (struct target_ops): Add REGCACHE parameter to
        to_prepare_to_store.
        (target_prepare_to_store): Likewise.
        * target.c (debug_to_prepare_to_store): Add REGCACHE parameter.
        (update_current_target): Adapt prepare_to_store de_fault rule.

        * regcache.c (regcache_raw_write): Pass regcache to
        target_prepare_to_store.

        * inftarg.c (child_prepare_to_store): Add REGCACHE parameter.
        Do not call CHILD_PREPARE_TO_STORE.
        * gnu-nat.c (gnu_prepare_to_store): Likewise.
        * procfs.c (procfs_prepare_to_store): Likewise.

        * inf-child.c (inf_child_prepare_to_store): Add REGCACHE parameter.
        * go32-nat.c (go32_prepare_to_store): Likewise.
        * monitor.c (monitor_prepare_to_store): Likewise.
        * nto-procfs.c (procfs_prepare_to_store): Likewise.
        * remote-m32r-sdi.c (m32r_prepare_to_store): Likewise.
        * remote-mips.c (mips_prepare_to_store): Likewise.
        * remote-sim.c (gdbsim_prepare_to_store): Likewise.
        * win32-nat.c (win32_prepare_to_store): Likewise.

        * remote.c (remote_prepare_to_store): Add REGCACHE parameter.
        Use it instead of current_regcache.

        * hpux-thread.c (hpux_thread_prepare_to_store): Add REGCACHE
        parameter.  Pass it on to next target.
        * sol-thread.c (sol_thread_prepare_to_store): Likewise.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * target.h (struct regcache): Add forward declaration.
        (struct target_ops): Add REGCACHE parameter to to_fetch_registers
        and to_store_registers target operations.
        (target_fetch_registers, target_store_registers): Update.

        * regcache.c (regcache_raw_read): Replace register_cached by
        regcache_valid_p.  Pass regcache to target_fetch_registers.
        (regcache_raw_write): Pass regcache to target_store_registers.

        * arm-linux-nat.c (store_fpregister, store_fpregs, store_register,
        store_regs, store_wmmx_regs): Replace register_cached by
        regcache_valid_p.

        * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd): Pass current_regcache
        to target_fetch_registers calls.
        * corelow.c (core_open): Likewise.
        * linux-nat.c (linux_nat_corefile_thread_callback): Likewise.
        * proc-service.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs,
        ps_lsetfpregs): Likewise.
        * sol-thread.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs,
        ps_lsetfpregs): Likewise.
        * win32-nat.c (win32_resume): Likewise.
        * ia64-tdep.c (ia64_store_return_value): Pass current_regcache
        to target_store_registers call.
        * rs6000-tdep.c (rs6000_push_dummy_call): Likewise.

        * inferior.h (store_inferior_registers): Update prototype.
        (fetch_inferior_registers): Likewise.
        * gnu-nat.c (gnu_store_registers, gnu_fetch_registers): Likewise.
        * mips-linux-nat.c (super_fetch_registers, super_store_registers):
        Update function pointer signatures.

        * aix-thread.c (aix_thread_fetch_registers): Add REGCACHE parameter,
        use it instead of current_regcache, update calls.
        (aix_thread_store_registers): Likewise.
        * alphabsd-nat.c (alphabsd_fetch_inferior_registers): Likewise.
        (alphabsd_store_inferior_registers): Likewise.
        * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise.
        (amd64bsd_store_inferior_registers): Likewise.
        * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers): Likewise.
        (amd64_linux_store_inferior_registers): Likewise.
        * arm-linux-nat.c (fetch_fpregister, fetch_fpregs, store_fpregister,
        store_fpregs, fetch_register, fetch_regs, store_register, store_regs,
        fetch_wmmx_regs, store_wmmx_regs): Likewise.
        (arm_linux_fetch_inferior_registers): Likewise.
        (arm_linux_store_inferior_registers): Likewise.
        * armnbsd-nat.c (fetch_register, fetch_regs, fetch_fp_register,
        fetch_fp_regs, armnbsd_fetch_registers): Likewise.
        (store_register, store_regs, store_fp_register, store_fp_regs,
        armnbsd_store_registers): Likewise.
        * bsd-kvm.c (bsd_kvm_fetch_pcb, bsd_kvm_fetch_registers): Likewise.
        * bsd-uthread.c (bsd_uthread_fetch_registers): Likewise.
        (bsd_uthread_store_registers): Likewise.
        * corelow.c (get_core_registers): Likewise.
        * go32-nat.c (fetch_register, go32_fetch_registers, store_register,
        go32_store_registers): Likewise.
        * hppabsd-nat.c (hppabsd_fetch_registers): Likewise.
        (hppabsd_store_registers): Likewise.
        * hppa-hpux-nat.c (hppa_hpux_fetch_register): Likewise.
        (hppa_hpux_fetch_inferior_registers): Likewise.
        (hppa_hpux_store_register): Likewise.
        (hppa_hpux_store_inferior_registers): Likewise.
        * hppa-linux-nat.c (fetch_register, store_register): Likewise.
        (hppa_linux_fetch_inferior_registers): Likewise.
        (hppa_linux_store_inferior_registers): Likewise.
        * hpux-thread.c (hpux_thread_fetch_registers): Likewise.
        (hpux_thread_store_registers): Likewise.
        * i386bsd-nat.c (i386bsd_fetch_inferior_registers): Likewise.
        (i386bsd_store_inferior_registers): Likewise.
        * i386gnu-nat.c (fetch_fpregs, gnu_fetch_registers, store_fpregs,
        gnu_store_registers): Likewise.
        * i386-linux-nat.c (fetch_register, store_register, fetch_regs,
        store_regs, fetch_fpregs, store_fpregs, fetch_fpxregs, store_fpxregs):
        Likewise.
        (i386_linux_fetch_inferior_registers): Likewise.
        (i386_linux_store_inferior_registers): Likewise.
        * ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
        (ia64_linux_fetch_registers): Likewise.
        (ia64_linux_store_register): Likewise.
        (ia64_linux_store_registers): Likewise.
        * inf-child.c (inf_child_fetch_inferior_registers): Likewise.
        (inf_child_store_inferior_registers): Likewise.
        * inf-ptrace.c (inf_ptrace_fetch_register): Likewise.
        (inf_ptrace_fetch_registers): Likewise.
        (inf_ptrace_store_register): Likewise.
        (inf_ptrace_store_registers): Likewise.
        * infptrace.c (fetch_register, store_register): Likewise.
        (fetch_inferior_registers, store_inferior_registers): Likewise.
        * m32r-linux-nat.c (fetch_regs, store_regs): Likewise.
        (m32r_linux_fetch_inferior_registers): Likewise.
        (m32r_linux_store_inferior_registers): Likewise.
        * m68kbsd-nat.c (m68kbsd_fetch_inferior_registers): Likewise.
        (m68kbsd_store_inferior_registers): Likewise.
        * m68klinux-nat.c (fetch_register, old_fetch_inferior_registers,
        store_register, old_store_inferior_registers, fetch_regs, store_regs,
        fetch_fpregs, store_fpregs): Likewise.
        (m68k_linux_fetch_inferior_registers): Likewise.
        (m68k_linux_store_inferior_registers): Likewise.
        * m88kbsd-nat.c (m88kbsd_fetch_inferior_registers): Likewise.
        (m88kbsd_store_inferior_registers): Likewise.
        * mips64obsd-nat.c (mips64obsd_fetch_inferior_registers): Likewise.
        (mips64obsd_store_inferior_registers): Likewise.
        * mips-linux-nat.c (mips64_linux_regsets_fetch_registers): Likewise.
        (mips64_linux_regsets_store_registers): Likewise.
        (mips64_linux_fetch_registers): Likewise.
        (mips64_linux_store_registers): Likewise.
        * mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise.
        (mipsnbsd_store_inferior_registers): Likewise.
        * monitor.c (monitor_fetch_register, monitor_store_register): Likewise.
        (monitor_fetch_registers, monitor_store_registers): Likewise.
        * nto-procfs.c (procfs_fetch_registers): Likewise.
        (procfs_store_registers): Likewise.
        * ppc-linux-nat.c (fetch_altivec_register, fetch_spe_register,
        fetch_register, supply_vrregset, fetch_altivec_registers,
        fetch_ppc_registers, ppc_linux_fetch_inferior_registers): Likewise.
        (store_altivec_register, store_spe_register, store_register, 
        fill_vrregset, store_altivec_registers, store_ppc_registers,
        ppc_linux_store_inferior_registers): Likewise.
        * ppcnbsd-nat.c (ppcnbsd_fetch_inferior_registers): Likewise.
        (ppcnbsd_store_inferior_registers): Likewise.
        * ppcobsd-nat.c (ppcobsd_fetch_registers): Likewise.
        (ppcobsd_store_registers): Likewise.
        * procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
        * remote.c (fetch_register_using_p, process_g_packet,
        fetch_registers_using_g, remote_fetch_registers): Likewise.
        (store_register_using_P, store_registers_using_G, 
        remote_store_registers): Likewise.
        * remote-m32r-sdi.c (m32r_fetch_registers, m32r_fetch_register,
        m32r_store_register, m32r_store_register): Likewise.
        * remote-mips.c (mips_fetch_registers, mips_store_registers): Likewise.
        * remote-sim.c (gdbsim_fetch_register): Likewise.
        (gdbsim_store_register): Likewise.
        * rs6000-nat.c (fetch_register, store_register): Likewise.
        (rs6000_fetch_inferior_registers): Likewise.
        (rs6000_store_inferior_registers): Likewise.
        * s390-nat.c (fetch_regs, store_regs): Likewise.
        (fetch_fpregs, store_fpregs): Likewise.
        (s390_linux_fetch_inferior_registers): Likewise.
        (s390_linux_store_inferior_registers): Likewise.
        * shnbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise.
        (shnbsd_store_inferior_registers): Likewise.
        * sol-thread.c (sol_thread_fetch_registers): Likewise.
        (sol_thread_store_registers): Likewise.
        * sparc-nat.c (fetch_inferior_registers): Likewise.
        (store_inferior_registers): Likewise.
        * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
        (spu_store_inferior_registers): Likewise.
        * target.c (debug_print_register): Likewise.
        (debug_to_fetch_registers, debug_to_store_registers): Likewise.
        * vaxbsd-nat.c (vaxbsd_fetch_inferior_registers): Likewise.
        (vaxbsd_store_inferior_registers): Likewise.
        * win32-nat.c (do_win32_fetch_inferior_registers): Likewise.
        (win32_fetch_inferior_registers): Likewise.
        (win32_store_inferior_registers): Likewise.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbcore.h (struct regcache): Add forward declaration.
        (struct core_fns): Add REGCACHE argument to core_read_registers
        callback.
        * corelow.c (get_core_register_section): Add REGCACHE argument,
        use it instead of current_regcache, pass it to core_read_registers
        callback.
        (get_core_registers): Add current_regcache as parameter to
        get_core_register_section calls.

        * alpha-nat.c (fetch_osf_core_registers): Add REGCACHE argument,
        use it instead of current_regcache.
        * armnbsd-nat.c (fetch_core_registers): Likewise.
        (fetch_elfcore_registers): Likewise.
        * core-regset.c (fetch_core_registers): Likewise.
        * cris-tdep.c (fetch_core_registers): Likewise.
        * irix5-nat.c (fetch_core_registers): Likewise.
        * m68klinux-nat.c (fetch_core_registers): Likewise.
        * mips-linux-tdep.c (fetch_core_registers): Likewise.
        * win32-nat.c (fetch_elf_core_registers): Likewise.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * gregset.h (struct regcache): Add forward declaration.
        (supply_gregset): Add REGCACHE parameter, make GREGS const.
        (supply_fpregset): Add REGCACHE parameter, make FPREGS const.
        (supply_fpxregset): Add REGCACHE parameter, make FPXREGS const.
        (fill_gregset): Add REGCACHE parameter.
        (fill_fpregset): Likewise.
        (fill_fpxregset): Likewise.

        Update all definitions accordingly:
        * alphabsd-nat.c, alpha-linux-nat.c, alpha-nat.c, amd64-linux-nat.c,
        arm-linux-nat.c, hppa-linux-nat.c, i386gnu-nat.c, i386-linux-nat.c,
        i386-sol2-nat.c, i386v4-nat.c, ia64-linux-nat.c, irix5-nat.c, 
        m32r-linux-nat.c, m68klinux-nat.c, mips-linux-nat.c, ppc-linux-nat.c,
        s390-nat.c, sparc64-linux-nat.c, sparc-linux-nat.c, sparc-sol2-nat.c 
        (supply_gregset): Add REGCACHE parameter, use it instead of 
        current_regcache.  Make GREGSETP parameter const, adapt casts.
        (supply_fpregset): Add REGCACHE parameter, use it instead of
        current_regcache.  Make FPREGSETP parameter const, adapt casts.
        (fill_gregset): Add REGCACHE parameter, use it instead of
        current_regcache.
        (fill_fpregset): Likewise.

        Update all callers to pass in current_regcache as the new argument:
        * core-regset.c: Include "regcache.h".
        (fetch_core_registers): Update supply_gregset,and supply_fpregset calls.
        * procfs.c: Include "regcache.h".
        (procfs_fetch_registers): Update supply_gregset, supply_fpregset calls.
        (procfs_store_registers): Update fill_gregset, fill_fpregset calls.
        (procfs_do_thread_registers): Likewise.
        (procfs_make_note_section): Likewise.
        * proc-service.c: Include "regcache.h".
        (ps_lgetregs): Update fill_gregset call.
        (ps_lsetregs): Update supply_gregset call.
        (ps_lgetfpregs): Update fill_fpregset call.
        (ps_lsetfpregs): Update supply_fpregset call.
        * sol-thread.c (sol_thread_fetch_registers): Update supply_gregset,
        supply_fpregset calls.
        (sol_thread_store_registers): Update fill_gregset, fill_fpregset calls.
        (ps_lgetregs): Update fill_gregset call.
        (ps_lsetregs): Update supply_gregset call.
        (ps_lgetfpregs): Update fill_fpregset call.
        (ps_lsetfpregs): Update supply_fpregset call.
        
        * linux-nat.c (linux_nat_do_thread_registers): Update fill_gregset,
        fill_fpregset, and fill_fpxregset calls.
        * i386-linux-nat.c (fetch_regs): Update supply_gregset call.
        (store_regs): Update fill_gregset call.
        (fetch_fpregs): Update supply_fpregset call.
        (store_fpregs): Update fill_fpregset call.
        (fetch_fpxregs): Update supply_fpxregset call.
        (store_fpxregs): Update fill_fpxregset call.
        * m32r-linux-nat.c (fetch_regs): Update supply_gregset call.
        (store_regs): Update fill_gregset call.
        * m68klinux-nat.c (fetch_regs): Update supply_gregset call.
        (store_regs): Update fill_gregset call.
        (fetch_fpregs): Update supply_fpregset call.
        (store_fpregs): Update fill_fpregset call.
        (fetch_core_registers): Update supply_gregset, supply_fpregset calls.
        * s390-nat.c (fetch_regs): Update supply_gregset call.
        (store_regs): Update fill_gregset call.
        (fetch_fpregs): Update supply_fpregset call.
        (store_fpregs): Update fill_fpregset call.

        * Makefile.in (core-regset.o, procfs.o, proc-service.o): Update
        dependencies.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * monitor.c (monitor_supply_register): Add REGCACHE parameter, use
        it instead of current_regcache.
        (parse_register_dump): Add REGCACHE parameter, pass it to 
        supply_register callback.
        (monitor_dump_reg_block): Add REGCACHE parameter, pass it to
        parse_register_dump.
        (monitor_dump_regs): Add REGCACHE parameter, pass it to
        parse_register_dump and dumpregs callback.
        (monitor_wait): Pass current_regcache to parse_register_dump and
        monitor_dump_regs.
        (monitor_fetch_register): Pass current_regcache to
        monitor_supply_register.
        (monitor_fetch_registers): Pass current_regcache to
        monitor_dump_regs.
        * monitor.h (struct monitor_ops): Add REGCACHE parameter to
        supply_register and dumpregs callbacks.
        (monitor_supply_register, monitor_dump_reg_block): Update
        prototypes.
        * dbug-rom.c (dbug_supply_register): Add REGCACHE parameter.  Pass
        it to monitor_supply_register.
        * dink32-rom.c (dink32_supply_register): Likewise.
        * ppcbug-rom.c (ppcbug_supply_register): Likewise.
        * m32r-rom.c (m32r_supply_register): Likewise.  Also, use REGCACHE
        instead of current_regcache.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * i386-nto-tdep.c (i386nto_supply_gregset, i386nto_supply_fpregset):
        Add REGCACHE parameter.  Use it instead of current_regcache.
        (i386nto_supply_regset): Add REGCACHE parameter, pass it to
        i386nto_supply_gregset and i386nto_supply_fpregset.
        (i386nto_regset_fill): Add REGCACHE parameter; use it instead
        of current_regcache.

        * nto-procfs.c (procfs_fetch_registers): Pass current_regcache to
        nto_supply_ helper functions.
        (procfs_store_registers): Pass current_regcache to nto_regset_fill.

        * nto-tdep.c (nto_dummy_supply_regset): Add REGCACHE parameter.

        * nto-tdep.h (struct nto_target_ops): Add REGCACHE parameter to
        supply_greget, supply_fpregset, supply_altregset, supply_regset,
        and regset_fill member function pointers.
        (nto_dummy_supply_regset): Adapt prototype.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * shnbsd-tdep.c (shnbsd_supply_reg): Add REGCACHE parameter, use it
        instead of current_regcache.  Make REGS const.
        (shnbsd_fill_reg): Add REGCACHE parameter; replace current_regcache.
        * shnbsd-tdep.h (shnbsd_supply_reg, shnbsd_fill_reg): Update
        prototypes.
        * shnbsd-nat.c: Include "regcache.h".
        (shnbsd_fetch_inferior_registers): Pass current_regcache to
        shnbsd_supply_reg.
        (shnbsd_store_inferior_registers): Pass current_regcache to
        shnbsd_fill_reg.
        * Makefile.in (shbsd-nat.o): Update dependencies.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * mips-linux-tdep.c (supply_32bit_reg): Add REGCACHE parameter.  Use it
        instead of current_regcache.
        (mips_supply_gregset): Likewise.  Pass REGCACHE to supply_32bit_reg.
        Make GREGSETP const, remove superfluous casts.
        (mips_fill_gregset): Add REGCACHE parameter; replace current_regcache.
        (mips_supply_fpregset): Likewise.  Make FPREGSETP const, remove 
        superfluous casts.
        (mips_fill_fpregset): Add REGCACHE parameter; replace current_regcache.
        (supply_64bit_reg): Likewise
        (mips64_supply_gregset): Likewise.  Pass REGCACHE to supply_64bit_reg.
        Make GREGSETP const, adapt casts accordingly.
        (mips64_fill_gregset): Add REGCACHE parameter; replace current_regcache.
        (mips64_supply_fpregset): Likewise.  Make FPREGSET const, adapt
        casts accordingly.
        (mips64_fill_fpregset): Add REGCACHE parameter; replace current_regcache.
        (fetch_core_registers): Pass current_regcache to mips{64}_(supply|fill)_
        helper routines.
        * mips-linux-tdep.h (mips_supply_gregset, mips_fill_gregset,
        mips_supply_fpregset, mips_fill_fpregset, mips64_supply_gregset,
        mips64_fill_gregset, mips64_supply_fpregset, mips64_fill_fpregset):
        Adapt prototypes.
        * mips-linux-nat.c: Include "regcache.h".
        (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): Pass
        current_regcache to mips{64}_(supply|fill)_ helper routines.
        (mips64_linux_regsets_fetch_registers): Likewise.
        (mips64_linux_regsets_store_registers): Likewise.

        * mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_supply_fpreg): Add
        REGCACHE argument; replace current_regcache.  Make REGS const.
        (mipsnbds_fill_reg, mipsnbsd_fill_fpreg): Add REGCACHE argument;
        replace current_regcache.
        * mipsnbsd-tdep.h (ipsnbsd_supply_reg, mipsnbsd_supply_fpreg,
        mipsnbds_fill_reg, mipsnbsd_fill_fpreg): Adapt prototypes.
        * mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers,
        mipsnbsd_store_inferior_registers): Pass current_regcache to
        mipsnbsd_(supply|fill)_... helper routines.

        * Makefile.in (mips-linux-nat.o): Update dependencies.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * i387-tdep.c (i387_fill_fsave, i387_fill_fxsave): Remove.
        * i387-tdep.h (i387_fill_fsave, i387_fill_fxsave): Remove prototypes.
        * i368-linux-nat.c (supply_fpregset, supply_fpxregset): Replace
        i387_fill_fsave and i387_fill_fxsave calls by inline copies.
        * i386-nto-tdep.c (i386nto_regset_fill): Likewise.
        * i386gnu-nat.c (store_fpregs): Likewise.
        * i386v4-nat.c (fill_fpregset): Likewise.
        * go32-nat.c (store_register, go32_store_registers): Likewise.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * cris-tdep.c (supply_gregset): Rename to ...
        (cris_supply_gregset): ... this.  Add REGCACHE parameter.  Use it
        instead of current_regcache.
        (fetch_core_registers): Update call.  Pass current_regcache.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * arnmnbsd-nat.c (supply_gregset): Rename to ...
        (arm_supply_gregset): ... this.  Add REGCACHE parameter.
        Use it instead of current_regcache.
        (supply_fparegset): Rename to ...
        (arm_supply_fparegset): ... this.  Add REGCACHE parameter.
        Use it instead of current_regcache.
        (fetch_regs, fetch_fp_regs): Update calls.  Pass current_regcache.
        (fetch_core_registers, fetch_elfcore_registers): Likewise.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * alpha-tdep.c (alpha_supply_int_regs, alpha_fill_int_regs,
        alpha_supply_fp_regs, alpha_fill_fp_regs): Add REGCACHE parameter,
        use it instead of current_regcache.
        * alpha-tdep.h (struct regcache): Add forward declaration.
        (alpha_supply_int_regs, alpha_fill_int_regs, alpha_supply_fp_regs,
        alpha_fill_fp_regs): Update prototypes.

        * alpha-nat.c: (supply_gregset, fill_gregset, supply_fpregset,
        fill_fpregset): Pass current_regcache to alpha_supply/fill_ routines.
        * alpha-linux-nat.c: Include "regcache.h".
        (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): Pass
        current_regcache to alpha_supply/fill_ routines.

        * alphabsd-tdep.c: Include "regcache.h".
        (alphabsd_supply_reg, alphabsd_supply_fpreg): Add REGCACHE paramter,
        pass it to alpha_supply_ routines.  Make REGS const.
        (alphabsd_fill_reg, alphabsd_fill_fpreg): Add REGCACHE parameter,
        pass it to alpha_fill_ routines.
        * alphabsd-tdep.h (struct regcache): Add forward declaration.
        (alphabsd_supply_reg, alphabsd_fill_reg, alphabsd_supply_fpreg,
        alphabsd_fill_fpreg): Update prototypes.

        * alphanbsd-nat.c (supply_gregset, fill_gregset, supply_fpregset,
        fill_fpregset, alphabsd_fetch_inferior_registers,
        alphabsd_store_inferior_registers): Pass current_regcache to
        alphabsd_supply/fill_ routines.

        * Makefile.in (alpha-linux-nat.o, alphabsd-tdep.o): Update
        dependencies.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * aix-thread.c (supply_gprs64, supply_reg32, supply_fprs,
        supply_sprs64, supply_sprs32): Add REGCACHE parameter, use it
        instead of current_regcache.
        (fetch_regs_user_thread, fetch_regs_kernel_thread): Add
        REGCACHE parameter, pass it to supply_ routines.
        (aix_thread_fetch_registers): Pass current_regcache to
        fetch_regs_user_thread and fetch_regs_kernel_thread.

        (fill_gprs64, fill_gprs32, fill_fprs, fill_sprs64, fill_sprs32):
        Add REGCACHE parameter, use it instead of current_regcache.
        Call regcache_valid_p instead of register_cached.
        (store_regs_user_thread, store_regs_kernel_thread): Likewise.
        Also, pass REGCACHE to fill_ routines.
        (aix_thread_store_registers): Pass current_regcache to
        store_regs_user_thread and store_regs_kernel_thread.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * m32r-linux-nat.c (supply_gregset): Do not modify contents
        pointed to by GREGSETP.

2007-05-06  Ulrich Weigand  <uweigand@de.ibm.com>

        * irix5-nat.c (fill_gregset): Use regcache_raw_collect instead
        of regcache_raw_read_signed.
        (fill_fpregset): Use regcache_raw_collect instead of
        regcache_raw_read.

2007-05-03  Kevin Buettner  <kevinb@redhat.com>

        * mips-tdep.c (mips_eabi_push_dummy_call): When pushing floating
        point arguments, test explicitly for use of the EABI32 ABI
        instead of inferring this condition from tests on register
        sizes.

2007-05-03  Kevin Buettner  <kevinb@redhat.com>

        * breakpoint.c (set_raw_breakpoint): Adjust breakpoint's address
        prior to allocating its location.

2007-05-02  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_o32_push_dummy_call): Remove conditions
        based on mips_abi_regsize() whose result is known in advance.
        (mips_o64_push_dummy_call): Likewise.

2007-04-29  Ulrich Weigand  <uweigand@de.ibm.com>

        * m68klinux-nat.c: Remove #ifndef USE_PROC_FS check.
        * m68k-tdep.c: Remove code within #ifdef USE_PROC_FS.

        * mips-linux-nat.c: Include "gregset.h".
        (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): Move
        from mips-linux-tdep.c.  Change parameter type to gdb_gregset_t.
        * mips-linux-tdep.c (supply_gregset, fill_gregset, supply_fpregset,
        fill_fpregset): Move to mips-linux-nat.c.

        * Makefile.in (m68k-tdep.o, mips-linux-nat.o): Update dependencies.

2007-04-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * regcache.c (deprecated_read_register_gen): Remove, inline ...
        (read_register): ... here.
        (deprecated_write_register_gen): Remove, inline ...
        (write_register): ... here.
        * regcache.h (deprecated_read_register_gen): Remove prototype.
        (deprecated_write_register_gen): Likewise.

        * remote-sim.c (gdbsim_store_register): Replace call to
        deprecated_read_register_gen with regcache_cooked_read.
        * target.c (debug_print_register): Replace calls to
        deprecated_read_register_gen and read_register with
        regcache_cooked_read.

2007-04-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * hpux-thread.c (hpux_thread_store_registers): Use
        regcache_raw_collect, not regcache_raw_read.
        * irix5-nat.c (fetch_core_registers): Use regcache_raw_supply,
        not regcache_raw_write.

2007-04-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh: Remove deprecated_register_byte.
        * gdbarch.c, gdbarch.h: Regenerate.
        * arch-utils.h (generic_register_size, generic_register_byte): Remove.
        * arch-utils.c (generic_register_size, generic_register_byte): Remove.

        * regcache.h (regcache_valid_p): Make REGCACHE parameter const.
        * regcache.c (regcache_valid_p): Allow to query cooked registers in
        read-only register caches.  Make REGCACHE parameter const.
        (regcache_dump): Do not check DEPRECATED_REGISTER_BYTE.

        * mi/mi-main.c (old_regs): Remove.
        (mi_setup_architecture_data, _initialize_mi_main): Remove.
        (register_changed_p): Reimplement to compare two register caches.
        (mi_cmd_data_list_changed_registers): Update caller.
        * mi/mi-main.h (mi_setup_architecture_data): Remove.
        * mi/mi-interp.c (mi_interpreter_init): Do not call
        mi_setup_architecture_data.

2007-04-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * alpha-nat.c (ALPHA_REGSET_BASE, ALPHA_REGSET_UNIQUE): Do not define,
        inline definition at the places the macros are used.
        * alpha-linux-nat.c (ALPHA_REGSET_BASE, ALPHA_REGSET_UNIQUE): Likewise.

2007-04-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * rs6000-aix-tdep.c: Include "regcache.h", "regset.h", and
        "gdb_string.h".
        (rs6000_aix32_reg_offsets, rs6000_aix64_reg_offsets): New variables.
        (rs6000_aix_supply_regset, rs6000_aix_collect_regset): New functions.
        (rs6000_aix32_regset, rs6000_aix64_regset): New variables.
        (rs6000_aix_regset_from_core_section): New function.
        (rs6000_aix_init_osabi): Register it.
        (_initialize_rs6000_aix_tdep): Register GDB_OSABI_AIX osabi and
        sniffer for bfd_arch_powerpc as well as bfd_arch_rs6000. 
        * rs6000-nat.c (CoreRegs): Do not define type.
        (fetch_core_registers, rs6000_core_fns): Remove.
        (_initialize_core_rs6000): Do not register it.  Rename to ...
        (_initialize_rs6000_nat): ... this.
        * Makefile.in (rs6000-aix-tdep.o): Update dependencies.

2007-04-27  Kevin Buettner  <kevinb@redhat.com>

        * dwarf2expr.c (unsigned_address_type): Add forward declaration.
        (dwarf2_read_address): Sign extend return address as required by
        target architecture.

2007-04-27  Kevin Buettner  <kevinb@redhat.com>

        * solib-frv.c (lm_base): Bail out if the main executable has
        not been relocated.

2007-04-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * alpha-linux-tdep.c (alpha_linux_supply_fpregset): Correct location
        of FPCR register in fpregset.

2007-04-27  Maciej W. Rozycki  <macro@mips.com>

        * Makefile.in (gdbtk-wrapper.o): Update dependencies.
        (gdbtk-varobj.o, gdbtk-cmds.o, gdbtk-stack.o): Likewise.

2007-04-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/rs6000/nm-rs6000.h (CHILD_SPECIAL_WAITSTATUS): Remove.
        * rs6000-nat.c (rs6000_wait): New function.
        (_initialize_core_rs6000): Install it as to_wait target method.
        * target.c (store_waitstatus): Don't check CHILD_SPECIAL_WAITSTATUS.

2007-04-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/rs6000/nm-rs6000.h (TARGET_CREATE_INFERIOR_HOOK): Remove.
        * fork-child.c (fork_inferior): Don't call TARGET_CREATE_INFERIOR_HOOK.
        * rs6000-nat.c (super_create_inferior): New variable.
        (rs6000_create_inferior): Make static.  Adapt argument list.  Call
        original version of create_inferior via super_create_inferior.
        (_initialize_core_rs6000): Install to_create_inferior target method.

2007-04-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * aix-thread.c (aix_thread_xfer_memory): Replace by ...
        (aix_thread_xfer_partial): ... this.
        (init_aix_thread_ops): Install to_xfer_partial instead
        of deprecated_xfer_memory target method.

        * config/powerpc/aix.mh (NATDEPFILES): Remove infptrace.o
        and inftarg.o, add inf-ptrace.o.
        * config/rs6000/nm-rs6000.h (FETCH_INFERIOR_REGISTERS,
        CHILD_XFER_MEMORY, KERNEL_U_SIZE, kernel_u_size): Remove.
        * rs6000-nat.c: Include "inf-ptrace.h" and "gdb_stdint.h".
        (fetch_inferior_registers): Rename to ...
        (rs6000_fetch_inferior_registers): ... this.  Make static.
        (store_inferior_registers): Rename to ...
        (rs6000_store_inferior_registers): ... this.  Make static.
        (read_word, child_xfer_memory): Remove.
        (rs6000_xfer_partial): New function.
        (kernel_u_size): Remove.
        (_initialize_core_rs6000): Add inf_ptrace-based target.
        * Makefile.in (rs6000-nat.o): Update dependencies.

2007-04-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * inf-ptrace.c: Include "gdb_stdint.h".
        (inf_ptrace_xfer_partial): Use "uintptr_t" instead of "long" as 
        intermediate type when casting CORE_ADDR to PTRACE_TYPE_ARG3.
        (inf_ptrace_fetch_register): Add intermediate cast to "uintptr_t"
        before casting CORE_ADDR to PTRACE_TYPE_ARG3.
        (inf_ptrace_store_register): Likewise.
        * Makefile.in (inf-ptrace.o): Update dependencies.

2007-04-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * configure.host (rs6000-*-*): Merge with powerpc-*-aix* rules.
        * configure.tgt (rs6000-*-*): Likewise.
        * config/rs6000/aix4.mh: Delete file.
        * config/rs6000/aix4.mt: Delete file.
        * config/rs6000/rs6000.mh: Delete file.
        * config/rs6000/rs6000.mt: Delete file.

        * config/powerpc/nm-aix.h: Delete file.
        * config/powerpc/aix.mh (NAT_FILE): Set to config/rs6000/nm-rs6000.h.

2007-04-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * aix-thread.c (fill_sprs32): Change argument types to "uint32_t *".
        Remove obsolete part of comment.
        (store_regs_user_thread): Use uint32_t temporaries when calling
        fill_sprs32.
        (store_regs_kernel_thread): Likewise.  Add assertion to verify
        correct size of struct ptsprs members.
        (aix_thread_xfer_memory): Fix type of myaddr.
        (aix_thread_extra_thread_info): Fix compiler warning.
        * rs6000-nat.c (rs6000_ptrace64): Change type of buf to "void *".
        (fetch_register, store_register): Adapt callers.

2007-04-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * vec.h (vec_free): Rename to vec_free_.  Adapt users.

2007-04-25  Ulrich Weigand  <uweigand@de.ibm.com>

        * alpha-linux-tdep.c: Include "gdb_string.h", "regset.h",
        and "regcache.h".
        (alpha_linux_supply_gregset, alpha_linux_supply_fpregset): New.
        (alpha_linux_gregset, alpha_linux_fpregset): New variables.
        (alpha_linux_regset_from_core_section): New function.
        (alpha_linux_init_abi): Install it.
        * alpha-linux-nat.c: Do not include "gdbcore.h".  Include
        "alpha-tdep.h", <sys/ptrace.h>, <alpha/ptrace.h>,
        <sys/procfs.h>, and "gregset.h".
        (ALPHA_REGSET_BASE, ALPHA_REGSET_UNIQUE, ALPHA_UNIQUE_PTRACE_ADDR):
        Move from config/alpha/nm-linux.h.
        (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): Copy
        from alpha-nat.c.
        (alpha_linux_register_u_offset): Inline register_addr from alpha-nat.c.
        * alpha-nat.c: Remove #ifdef __linux__ section.
        (fetch_elf_core_registers, alpha_elf_core_fns): Remove.
        (_initialize_core_alpha): Do not register alpha_elf_core_fns.
        (ALPHA_UNIQUE_PTRACE_ADDR, ALPHA_REGSET_UNIQUE): Define unconditionally.
        (ALPHA_REGSET_BASE): Move from config/alpha/nm-osf.h.
        * config/alpha/alpha-linux.mh (NAT_FILE): Set to config/nm-linux.h.
        (NATDEPFILES): Remove alpha-nat.o.
        * config/alpha/nm-linux.h: Delete file.
        * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): Move to alpha-nat.c.
        * Makefile.in (alpha-linux-nat.o): Update dependencies.
        (alpha-linux-tdep.o): Likewise.

2007-04-25  Ulrich Weigand  <uweigand@de.ibm.com>

        * mips-linux-nat.c: No longer include "gdbcore.h".
        (mips_linux_register_addr): Move from mips-linux-tdep.c.
        (mips64_linux_register_addr): Likewise.
        (mips_linux_register_u_offset): Call mips_linux_register_addr or
        mips64_linux_register_addr instead of register_addr.
        * mips-linux-tdep.c (mips_linux_register_addr,
        mips64_linux_register_addr): Move to mips-linux-nat.c.
        (register_addr): Remove.
        (register_addr_data, init_register_addr_data): Remove.
        (_initialize_mips_linux_tdep): Do not initialize register_addr_data.
        (set_mips_linux_register_addr): Remove.
        (mips_linux_init_abi): Do not call set_mips_linux_register_addr.
        * Makefile.in (mips-linux-nat.o): Update dependencies.

2007-04-25  Ulrich Weigand  <uweigand@de.ibm.com>

        * linux-nat.c (linux_register_u_offset): Remove.
        (linux_target_install_ops): New function.
        (linux_target): Use it.
        (linux_trad_target): New function.
        * linux-nat.h (linux_trad_target): Declare.

        * alpha-linux-nat.c: Include "gdbcore.h".
        (alpha_linux_register_u_offset): New function.
        (_initialize_alpha_linux_nat): Use linux_trad_target.

        * mips-linux-nat.c: Include "gdbcore.h".
        (mips_linux_register_u_offset): New function.
        (_initialize_mips_linux_nat): Use linux_trad_target.

        * config/arm/linux.mh (NAT_FILE): Set to config/nm-linux.h.
        * config/arm/nm-linux.h: Delete file.

        * config/i386/nm-linux64.h (FETCH_INFERIOR_REGISTERS): Remove.
        * config/i386/nm-linux.h (FETCH_INFERIOR_REGISTERS): Remove.

        * config/ia64/linux.mh (NAT_FILE): Set to config/nm-linux.h.
        * config/ia64/nm-linux.h: Delete file.

        * config/m32r/linux.mh (NAT_FILE): Set to config/nm-linux.h.
        * config/m32r/nm-linux.h: Delete file.

        * config/m68k/linux.mh (NAT_FILE): Set to config/nm-linux.h.
        * config/m68k/nm-linux.h: Delete file.

        * config/pa/linux.mh (NAT_FILE): Set to config/nm-linux.h.
        * config/pa/nm-linux.h: Delete file.

        * config/powerpc/linux.mh (NAT_FILE): Set to config/nm-linux.h.
        * config/powerpc/ppc64-linux.mh (NAT_FILE): Likewise.
        * config/powerpc/nm-linux.h: Delete file.

        * config/s390/s390.mh (NAT_FILE): Set to config/nm-linux.h.
        * config/s390/nm-linux.h: Delete file.

        * config/sparc/linux.mh (NAT_FILE): Set to config/nm-linux.h.
        * config/sparc/linux64.mh (NAT_FILE): Likewise.
        * config/sparc/nm-linux.h: Delete file.

        * Makefile.in (alpha-linux-nat.o): Update dependencies.
        (mips-linux-nat.o): Likewise.

2007-04-25  Ulrich Weigand  <uweigand@de.ibm.com>

        * core-aout.c: Delete file.
        * Makefile.in (ALLDEPFILES): Remove core-aout.c.
        (core-aout.o): Delete rule.
        * gdbcore.h (kernel_u_addr, KERNEL_U_ADDR): Remove.

        * config/alpha/nm-linux.h (U_REGS_OFFSET): Remove.

        * arm-linux-nat.c (arm_linux_kernel_u_size): Remove.
        * config/arm/nm-linux.h (U_REGS_OFFSET, KERNEL_U_SIZE,
        KERNEL_U_ADDR): Remove.

        * i386-linux-nat.c (register_u_addr, kernel_u_size): Remove.
        (cannot_fetch_register, cannot_store_register): Remove.
        (fetch_register): Inline cannot_fetch_register and register_addr.
        (store_register): Inline cannot_store_register and register_addr.
        * config/i386/linux.mh (NATDEPFILES): Remove core-aout.o.
        * config/i386/nm-linux.h (KERNEL_U_SIZE, KERNEL_U_ADDR,
        REGISTER_U_ADDR, CANNOT_FETCH_REGISTER, CANNOT_STORE_REGISTER):
        Remove.

        * m68klinux-nat.c (m68k_linux_register_u_addr, kernel_u_size): Remove.
        (fetch_register): Inline register_addr.
        (store_register): Inline register_addr.
        * config/m68k/linux.mh (NATDEPFILES): Remove core-aout.o.
        * config/m68k/nm-linux.h (KERNEL_U_SIZE, KERNEL_U_ADDR,
        U_REGS_OFFSET, REGISTER_U_ADDR): Remove.

        * config/mips/nm-irix5.h (REGISTER_U_ADDR): Remove.
        * config/mips/nm-linux.h (KERNEL_U_SIZE, U_REGS_OFFSET,
        REGISTER_U_ADDR): Remove.

        * hppa-linux-nat.c (register_addr): Rename to ...
        (hppa_linux_register_addr): ... this.  Make static.
        (fetch_register, store_register): Adapt callers.
        * config/pa/nm-linux.h (U_REGS_OFFSET): Remove.

        * ppc-linux-nat.c (kernel_u_size): Remove.
        * config/powerpc/nm-linux.h (KERNEL_U_SIZE, KERNEL_U_ADDR): Remove.

        * vax-nat.c (vax_kernel_u_addr, vax_register_u_addr): Make static.
        * config/vax/vax.mh (NATDEPFILES): Remove core-aout.o.
        (NAT_FILE): Remove.
        * config/vax/nm-vax.h: Delete file.

2007-04-20  Mark Shinwell  <shinwell@codesourcery.com>

        * MAINTAINERS (Write After Approval): Add myself.

2007-04-20  Mark Shinwell  <shinwell@codesourcery.com>

        * Makefile.in: Adjust dependencies of m68klinux-tdep.c.
        * m68klinux-tdep.c (m68k_uclinux_sigcontext_reg_offset): New.
        (m68k_linux_sigcontext_reg_offset): Fix typo.
        (target_is_uclinux): New.
        (m68k_linux_inferior_created): New.
        (m68k_linux_get_sigtramp_info):  Check for uClinux or
        normal Linux.  Use m68k_uclinux_sigcontext_reg_offset for
        uClinux.
        (_initialize_m68k_linux_tdep): Register
        m68k_linux_inferior_created.

2007-04-19  Pedro Alves  <pedro_alves@portugalmail.pt>

        * win32-nat.c (win32_detach): Remove delete_command call.
        Resume inferior with win32_resume instead of win32_continue.

2007-04-19  Jerome Guitton  <guitton@adacore.com>

        * ser-mingw.c (fd_is_file): New function.
        (file_select_thread): New function.
        (ser_console_wait_handle): Add special handling for files.

2007-04-18  Denis Pilat  <denis.pilat@st.com>

        * dwarf2read.c (read_subrange_type): Use DW_ATE_signed default type
        when missing from DW_TAG_subrange_type.  Remove the handling of null
        return from die_type.

2007-04-18  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_eabi_push_dummy_call): Revert the last
        change to rearrange some brackets.
        (mips_n32n64_push_dummy_call): Likewise.
        (mips_o32_push_dummy_call): Likewise.
        (mips_o64_push_dummy_call): Likewise.

2007-04-18  Denis Pilat  <denis.pilat@st.com>

        * infcmd.c (post_create_inferior): Start with a call to 
        target_terminal_ours.

2007-04-17  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_eabi_push_dummy_call): Rearrange some
        brackets.
        (mips_n32n64_push_dummy_call): Likewise.  Reformat some
        expressions.
        (mips_o32_push_dummy_call): Likewise.
        (mips_o64_push_dummy_call): Likewise.

2007-04-17  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_n32n64_push_dummy_call): Fix a typo in a
        comment.

2007-04-17  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_n32n64_push_dummy_call): Fix a typo in a
        comment.
        (mips_o32_push_dummy_call): Likewise.

2007-04-17  Andreas Schwab  <schwab@suse.de>

        * symtab.c (skip_prologue_using_sal): Allow the end of the prologue
        sal to be bigger than the end of the function.

2007-04-17  Maciej W. Rozycki  <macro@mips.com>
            Nigel Stephens  <nigel@mips.com>

        * mips-tdep.c (mips_o32_push_dummy_call): Take account of
        argument alignment requirements when calculating stack space
        required.  When aligning an arg register to eight bytes
        boundary, align stack_offset too.  Write floating-point
        arguments to the appropriate integer register if need go there.
        (mips_o64_push_dummy_call): Likewise.

2007-04-14  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (software_single_step): Remove "insert_breakpoints_p" and
        "sig" arguments, add "regcache" argument.
        * gdbarch.c, gdbarch.h: Regenerate.

        * infrun.c (resume): Update SOFTWARE_SINGLE_STEP call arguments.
        (handle_inferior_event): Call remove_single_step_breakpoints directly
        instead of calling SOFTWARE_SINGLE_STEP to remove breakpoints.

        * alpha-tdep.c (alpha_software_single_step): Update argument list.
        Remove handling of !insert_breakpoints_p case.
        * arm-tdep.c (arm_software_single_step): Likewise.
        * cris-tdep.c (cris_software_single_step): Likewise.
        * mips-tdep.c (mips_software_single_step): Likewise.
        * rs6000-tdep.c (rs6000_software_single_step): Likewise.
        * sparc-tdep.c (sparc_software_single_step): Likewise.
        * spu-tdep.c (spu_software_single_step): Likewise.

        * alpha-tdep.h (alpha_software_single_step): Update prototype.
        * mips-tdep.h (mips_software_single_step): Likewise.
        * rs6000-tdep.h (rs6000_software_single_step): Likewise.
        * sparc-tdep.h (sparc_software_single_step): Likewise.

2007-04-14  Ulrich Weigand  <uweigand@de.ibm.com>

        * alpha-tdep.c (alpha_software_single_step): Do not call write_pc
        when removing single-step breakpoints.

2007-04-14  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.h (varobj_set_frozen): New
        (varobj_get_frozen): New.
        (varobj_update): New parameter explicit.
        * varobj.c (struct varobj): New fields frozen
        and not_fetched.
        (varobj_set_frozen, varobj_get_frozen): New.
        (install_new_value): Don't fetch values for 
        frozen variable object, or children thereof.  Allow
        a frozen variable object to have non-fetched value.
        (varobj_update): Allow updating child variables.
        Don't traverse frozen children.
        (new_variable): Initialize the frozen field.
        (c_value_of_variable): Return NULL for frozen
        variable without any value yet. 
        * mi/mi-cmd-var.c (varobj_update_one): New parameter
        'explicit'.
        (mi_cmd_var_create): Output the 'frozen' field,
        as soon as testsuite is adjusted to expect that field.
        (mi_cmd_var_set_frozen): New.
        (mi_cmd_var_update): Pass the 'explicit' parameter to
        varobj_update_one.
        * mi/mi-cmds.c (mi_cmds): Register '-var-set-frozen'.
        * mi/mi-cmds.h (mi_cmd_var_set_frozen): Declare.
        
2007-04-13  Paul Brook  <paul@codesourcery.com>

        * target-descriptions.c (tdesc_named_type): Add ieee_single and
        ieee_double.
        * doc/gdb.texinfo: Document ieee_single and ieee_double target types.

2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * mips-mdebug-tdep.c, mips-mdebug-tdep.h, ocd.c, ocd.h, ppc-bdm.c,
        remote-e7000.c, remote-hms.c, remote-utils.c, remote-utils.h,
        scm-exp.c, scm-lang.c, scm-lang.h, scm-tags.h, scm-valprint.c,
        ser-e7kpc.c, sh3-rom.c, stop-gdb.c: Delete.
        * Makefile.in: Remove references to deleted files.
        * README: Do not mention deleted ROM monitor interfaces.
        * defs.h (enum language): Delete language_scm.
        * expprint.c (print_subexp_standard): Do not handle OP_EXPRSTRING.
        (dump_subexp_body_standard): Likewise.
        * parse.c (operator_length_standard): Likewise.
        * expression.h (enum exp_opcode): Delete OP_EXPRSTRING.
        * remote-mips.c: Do not include remote-utils.h.
        * remote-sim.c: Likewise.  Use remote_debug instead of sr_get_debug
        throughout.
        * value.c: Do not include scm-lang.h.
        (unpack_long): Delete scm_unpack call.
        * config/h8300/h8300.mt, config/mips/embed.mt,
        config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt,
        config/sh/embed.mt, config/sh/linux.mt: Remove references to
        deleted files.
        * NEWS: Mention removed files.

2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * symfile.c (add_psymbol_with_dem_name_to_list): Remove.
        * symfile.h (add_psymbol_with_dem_name_to_list): Remove prototype.

2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Mention removal of HP aCC support.

2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Do not ignore the
        first entry for static executables.
        (breakpoint_addr): Delete unused variable.
        (elf_locate_base): Search for _r_debug in static executables.
        (enable_break): Do not set breakpoint_addr.  Scan solib_break_names
        also.

2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * breakpoint.c (update_breakpoints_after_exec, print_it_typical)
        (bpstat_what, print_one_breakpoint, allocate_bp_location)
        (mention): Remove bp_through_sigtramp support.
        * breakpoint.h (enum bptype): Remove bp_through_sigtramp.

2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * breakpoint.c (bpstat_what): Give step-resume higher priority than
        shlib events.

2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * infrun.c: Doc fixes.
        (handle_inferior_event): Clarify debug message.
        (insert_step_resume_breakpoint_at_sal): Print a debug message.

2007-04-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * configure.tgt (arm-*-nto*, sh-*-nto*): Remove.

2007-04-12  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/m68k/tm-monitor.h: Delete file.
        * config/m68k/monitor.mt (DEPRECATED_TM_FILE): Remove.
        * m68k-tdep.c (m68k_gdbarch_init): set_gdbarch_decr_pc_after_break
        call moved to ...
        * m68kbsd-tdep.c (m68kbsd_init_abi): ... here and ...
        * m68klinux-tdep.c (m68k_linux_init_abi): ... here.

2007-04-12  Luis Machado  <luisgpm@br.ibm.com>

        * gdbarch.sh (software_single_step): Change the return type
        from void to int and reformatted some comments to <= 80
        columns.
        * gdbarch.c, gdbarch.h: Regenerated.
        * alpha-tdep.c (alpha_software_single_step): Likewise.
        * alpha-tdep.h (alpha_software_single_step): Likewise.
        * arm-tdep.c (arm_software_single_step): Likewise.
        * cris-tdep.c (cris_software_single_step): Likewise.
        * mips-tdep.c (mips_software_single_step): Likewise.
        * mips-tdep.h (mips_software_single_step): Likewise.
        * rs6000-tdep.c (rs6000_software_single_step): Likewise.
        * rs6000-tdep.h (rs6000_software_single_step): Likewise.
        * sparc-tdep.c (sparc_software_single_step): Likewise.
        * sparc-tdep.h (sparc_software_single_step): Likewise.
        * spu-tdep.c (spu_software_single_step): Likewise.
        * infrun.c (resume): Check the return value from SOFTWARE_SINGLE_STEP
        and act accordingly.

2007-04-11  Steve Ellcey  <sje@cup.hp.com>

        * configure.ac (build_warnings): Add -Wno-char-subscripts.
        * configure: Regenerate.
        * doc/gdbint.texinfo (warning flags): Add -Wno-char-subscripts.

2007-04-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * libunwind-frame.c (LIBUNWIND_SO): Use major version number for `.so'.

2007-04-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdbtypes.h (TYPE_FLAG_STUB_SUPPORTED, TYPE_STUB_SUPPORTED): New
        macros.
        (TYPE_IS_OPAQUE): Empty vs. opaque structures are now
        distinct on the TYPE_STUB_SUPPORTED debug targets.
        * dwarf2read.c (read_structure_type): Set TYPE_FLAG_STUB_SUPPORTED.

2007-04-11  Joel Brobecker  <brobecker@adacore.com>

        * sparc-tdep.c (X_RS2): New macro.
        (sparc_skip_stack_check): New function.
        (sparc_analyze_prologue): Adjust PC past stack probing
        sequence if necessary.

2007-04-10  Andreas Schwab  <schwab@suse.de>

        * rs6000-tdep.c (rs6000_dwarf2_reg_to_regnum): Decode 64 as CR
        register.

2007-04-10  Daniel Jacobowitz  <dan@codesourcery.com>

        * breakpoint.c (gdb_breakpoint_query): Really return an
        enum gdb_rc.
        (gdb_breakpoint): Likewise.
        * thread.c (gdb_list_thread_ids): Likewise.
        (gdb_thread_select): Likewise.
        * mi/mi-main.c (mi_cmd_thread_select): Expect an enum gdb_rc.
        (mi_cmd_thread_list_ids): Remove bogus initialization.

2007-04-10  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (SFILES): Remove hpacc-abi.c.
        (COMMON_OBS): Remove hpacc-abi.o.
        (ALLDEPFILES): Remove hpread.c and $(HPREAD_SOURCE).
        (hpacc-abi.o, hpread.o): Delete rules.
        * somread.c: Delete extern declarations from hpread.c.
        (som_symfile_read): Do not call do_pxdb or hpread_build_psymtabs.
        (som_symfile_finish): Do not call hpread_symfile_finish.
        (som_symfile_init): Do not call hpread_symfile_init.
        * config/pa/hppa64.mt (TDEPFILES): Remove hpread.o.
        * config/pa/hppahpux.mt (TDEPFILES): Likewise.
        * hpacc-abi.c, hpread.c: Deleted.

2007-04-10  Daniel Jacobowitz  <dan@codesourcery.com>

        * solib-svr4.c (enable_break): Simplify return value.
        (svr4_solib_create_inferior_hook): Do not warn if enable_break fails.

2007-04-10  Andreas Schwab  <schwab@suse.de>

        * solib-svr4.h (struct link_map_offsets): Remove l_addr_size,
        l_ld_size, l_next_size, l_prev_size, l_name_size.

        * solib-svr4.c (LM_ADDR_FROM_LINK_MAP): Use extract_typed_address
        to extract addresses from link map.
        (LM_DYNAMIC_FROM_LINK_MAP): Likewise.
        (LM_NEXT): Likewise.
        (LM_NAME): Likewise.
        (IGNORE_FIRST_LINK_MAP_ENTRY): Likewise.
        (elf_locate_base): Likewise.
        (open_symbol_file_object): Likewise.
        (svr4_fetch_objfile_link_map): Likewise.
        (SOLIB_EXTRACT_ADDRESS): Remove unused macro.
        (HAS_LM_DYNAMIC_FROM_LINK_MAP): Test l_ld_offset instead of
        l_ld_size.
        (svr4_ilp32_fetch_link_map_offsets): Don't set removed members.
        (svr4_lp64_fetch_link_map_offsets): Likewise.

        * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Don't set
        removed members.  Set l_ld_offset to -1 if not present.

2007-04-08  Vladimir Prus  <vladimir@codesourcery.com>
        
        Pass stderr of program run with "target remote |"
        via gdb_stderr.
        * serial.c (serial_open): Set error_fd to -1.
        * serial.h (struct serial): New field error_fd.
        (struct serial_opts): New field avail.
        * ser-pipe.c (pipe_open): Create another pair
        of sockets.  Pass stderr to gdb.
        * ser-mingw.c (pipe_windows_open): Pass
        PEX_STDERR_TO_PIPE to pex_run.  Initialize
        sd->error_fd.
        (pipe_avail): New.
        (_initialize_ser_windows): Hook pipe_avail.
        * ser-base.c (generic_readchar): Check if there's
        anything in stderr channel and route that to gdb_stderr.

2007-04-03  Pedro Alves  <pedro_alves@portugalmail.pt>

        * dbxread.c (read_ofile_symtab): Move current_objfile
        clearing to after end_stabs.

2007-04-01  Andreas Schwab  <schwab@suse.de>

        * rs6000-tdep.c (rs6000_convert_from_func_ptr_addr): Use parameter
        gdbarch instead of current_gdbarch.

2007-04-01  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c (varobj_create): Keep varobj value
        NULL when evaluating the type.
        
2007-03-31  Pedro Alves  <pedro_alves@portugalmail.pt>

        * NEWS: Mention new Windows CE support.

2007-03-30  Pedro Alves  <pedro_alves@portugalmail.pt>

        * configure.tgt: Move mips*-*-pe and sh*-*-pe to 
        the obsoletion stanza.
        * NEWS: Mention deleted targets.

        * config/sh/tm-wince.h: Remove.
        * config/sh/wince.mt: Remove.
        * config/mips/tm-wince.h: Remove.
        * config/mips/wince.mt: Remove.

        * wince.c: Remove.
        * wince-stub.c: Remove.
        * wince-stub.h: Remove.
        * Makefile.in (wince.o): Remove rule.
        (wince-stub.o): Likewise.

        * mips-tdep.c (mips_next_pc): Make static.
        * mips-tdep.h (mips_next_pc): Remove declaration.
        * arm-tdep.c (arm_pc_is_thumb): Make static.
        (thumb_get_next_pc): Likewise.
        (arm_get_next_pc): Likewise.
        * arm-tdep.h (arm_pc_is_thumb_dummy): Remove declaration.
        (arm_pc_is_thumb): Likewise.
        (thumb_get_next_pc): Likewise.
        (arm_get_next_pc): Likewise.

2007-03-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * MAINTAINERS: Remove d10v entry.
        * Makefile.in (SFILES): Remove dwarfread.c.
        (COMMON_OBS): Remove dwarfread.o.
        (gdb_sim_d10v_h, abug-rom.o, cpu32bug-rom.o, d10v-tdep.o, dwarfread.o)
        (remote-est.o, rom68k-rom.o): Delete.
        * NEWS: Mention removal of d10v, target abug, target cpu32bug,
        target est, target rom68k, and DWARF 1.
        * configure.tgt: Mark d10v as removed.
        * dwarf2read.c: Doc update.
        * elfread.c (struct elfinfo): Remove dboffset, dbsize, lnoffset,
        and lnsize.
        (elf_locate_sections): Do not set them.
        (elf_symfile_read): Do not call dwarf_build_psymtabs.
        * symfile.h (dwarf_build_psymtabs): Delete prototype.
        * config/m68k/monitor.mt (TDEPFILES): Prune.
        * abug-rom.c, cpu32bug-rom.c, d10v-tdep.c, dwarfread.c,
        remote-est.c, rom68k-rom.c, config/d10v/d10v.mt: Delete.

2007-03-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * doublest.c (convert_floatformat_to_doublest): Use
        floatformat_classify.
        (floatformat_is_nan): Rename to...
        (floatformat_classify): ...this.  Return more information.
        * doublest.h (enum float_kind): New.
        (floatformat_is_nan): Replace prototype...
        (floatformat_classify): ...with this one.
        * valprint.c (print_floating): Use floatformat_classify.  Handle
        infinity.

2007-03-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * README: Mention ISO C library requirement.

2007-03-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (SFILES): Remove nlmread.c.
        (COMMON_OBS): Remove nlmread.o.
        (nlmread.o): Delete rule.
        * README: Delete reference to remote-st.c.
        * acinclude.m4 (CY_AC_TCL_LYNX_POSIX): Delete.
        * defs.h (enum gdb_osabi): Delete GDB_OSABI_NETWARE and
        GDB_OSABI_LYNXOS.
        * i386-tdep.c (i386_nw_init_abi, i386_nlm_osabi_sniffer): Delete.
        (_initialize_i386_tdep): Do not reference them.
        * nlmread.c: Delete file.
        * osabi.c (gdb_osabi_names): Remove NetWare and LynxOS.
        * target.c: Doc update.
        * thread.c: Delete commented include.
        * config/alpha/tm-alpha.h: Doc update.

2007-03-30  Chris Dearman  <chris@mips.com>

        * utils.c (string_to_core_addr): Comment typo.

2007-03-30  Chris Dearman  <chris@mips.com>

        * mips-tdep.c: Comment typo.

2007-03-29  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/alpha/nm-osf.h (PTRACE_XFER_TYPE): Remove.
        * config/mips/nm-linux.h (PTRACE_ARG3_TYPE, PTRACE_XFER_TYPE): Remove.
        * config/sparc/nm-linux.h (PTRACE_ARG3_TYPE, PTRACE_XFER_TYPE): Remove.
        * config/powerpc/nm-ppc64-linux.h: Remove file.
        * config/powerpc/ppc64-linux.mh (NATDEPFILES): Set to nm-linux.h.
        * inferior.h (PTRACE_ARG3_TYPE): Do not define.
        (call_ptrace): Change type of third argument to PTRACE_TYPE_ARG3.
        * infptrace.c (call_ptrace): Likewise.
        * m68klinux-nat.c (PTRACE_XFER_TYPE): Do not define.
        (fetch_register): Replace PTRACE_ARG3_TYPE by PTRACE_TYPE_ARG3
        and PTRACE_XFER_TYPE by PTRACE_TYPE_RET.
        (store_register): Likewise.

2007-03-29  Joel Brobecker  <brobecker@adacore.com>

        * Makefile.in (varobj.o): Add missing dependency.

2007-03-29  Michael Snyder  <msnyder@access-company.com>

        * MAINTAINERS: Update my email address.

2007-03-29  Joel Brobecker  <brobecker@adacore.com>

        Add support for exception handling with multiple versions of
        the Ada runtime:
        * ada-lang.c: Update general comments on how Ada exception catchpoints
        are implemented.
        (raise_sym_name, raise_unhandled_sym_name, raise_assert_sym_name)
        (__gnat_raise_nodefer_with_msg): Delete.
        (ada_unhandled_exception_name_addr_ftype): New type.
        (exception_support_info): New type.
        (ada_unhandled_exception_name_addr): Add forward declaration.
        (ada_unhandled_exception_name_addr_from_raise): Likewise.
        (default_exception_support_info): New constant.
        (exception_support_info_fallback): Likewise.
        (exception_info): New global variable.
        (ada_exception_support_info_sniffer): New function.
        (ada_executable_changed_observer): Likewise.
        (ada_unhandled_exception_name_addr_from_raise): Renamed from
        ada_unhandled_exception_name_addr.
        (ada_unhandled_exception_name_addr): Reimplement to match the
        latest Ada runtime implementation.
        (error_breakpoint_runtime_sym_not_found): Delete.
        (ada_exception_sym_name): Get the exception sym name from
        exception_info rather than hardcoding it.
        (ada_exception_sal): Add call to ada_exception_support_info_sniffer.
        Update error handling.
        * Makefile.in (ada-lang.o): Add dependency on observer.h.

2007-03-29  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (coff_solib_h, coff-solib.o, i386v-nat.o, lynx-nat.o)
        (remote-st.o, uw-thread.o): Delete.
        (HFILES_NO_SRCDIR, ALLDEPFILES): Update.
        * configure.host: Move hppa*-*-hiux*, i[34567]86-ncr-*,
        i[34567]86-*-dgux*, i[34567]86-*-lynxos*, i[34567]86-*-sco3.2v5*,
        i[34567]86-*-sco3.2v4*, i[34567]86-*-sco*, i[34567]86-*-sysv4.2*,
        i[34567]86-*-sysv4*, i[34567]86-*-sysv5*, i[34567]86-*-unixware2*,
        i[34567]86-*-unixware*, i[34567]86-*-sysv*, i[34567]86-*-isc*, and
        rs6000-*-lynxos* to an obsoletion stanza.
        * configure.tgt: Move hppa*-*-hiux*, i[34567]86-ncr-*,
        i[34567]86-*-lynxos*, m68*-cisco*-*, m68*-tandem-*, m68*-*-os68k*,
        and rs6000-*-lynxos* to an obsoletion stanza.  Do not mention
        i[34567]86-*-netware*.
        * NEWS: Mention deleted targets.

        * coff-solib.c, coff-solib.h, i386v-nat.c, lynx-nat.c, remote-st.c,
        uw-thread.c, config/nm-lynx.h, config/i386/i386sco.mh,
        config/i386/i386sco4.mh, config/i386/i386sco5.mh, config/i386/i386v.mh,
        config/i386/i386v4.mh, config/i386/i386v42mp.mh,
        config/i386/ncr3000.mh, config/i386/ncr3000.mt,
        config/i386/nm-i386sco.h, config/i386/nm-i386sco4.h,
        config/i386/nm-i386sco5.h, config/i386/nm-i386v.h,
        config/i386/nm-i386v4.h, config/i386/nm-i386v42mp.h,
        config/m68k/cisco.mt, config/m68k/os68k.mt, config/m68k/st2000.mt,
        config/m68k/tm-cisco.h, config/m68k/tm-os68k.h,
        config/rs6000/rs6000lynx.mh, config/rs6000/rs6000lynx.mt,
        config/rs6000/tm-rs6000ly.h: Delete files.

2007-03-29  Daniel Jacobowitz  <dan@codesourcery.com>

        * defs.h (deprecated_registers_changed_hook): Delete declaration.
        * interps.c (clear_interpreter_hooks): Do not clear
        deprecated_registers_changed_hook.
        * regcache.c (registers_changed): Do not call it.
        * top.c (deprecated_registers_changed_hook): Do not define it.
        * mi/mi-interp.c (mi_command_loop): Do not clear it.
        * tui/tui-hooks.c (tui_install_hooks): Do not install it.
        (tui_remove_hooks): Do not remove it.
        (tui_selected_frame_level_changed_hook): Check for negative level.
        Use get_selected_frame.
        (tui_registers_changed_hook): Deleted.

2007-03-29  Joel Brobecker  <brobecker@adacore.com>

        * stabsread.c (add_undefined_type): Add extra parameter.
        Now handles nameless types separately.
        (struct nat): New type.
        (noname_undefs, noname_undefs_allocated, noname_undefs_length):
        New static variables.
        (read_type): Update calls to add_undefined_type.
        (add_undefined_type_noname): New function.
        (add_undefined_type_1): Renames from add_undefined_type.
        (cleanup_undefined_types_noname): New function.
        (cleanup_undefined_types_1): Renames cleanup_undefined_types.
        (cleanup_undefined_types): New handles nameless types separately.
        (_initialize_stabsread): Initialize our new static constants.

2007-03-29  Denis Pilat  <denis.pilat@st.com>

        * configure.ac: Test for signal.h.
        * configure, config.in: Regenerate.

2007-03-29  Denis Pilat  <denis.pilat@st.com>

        * stack.c (print_stack_frame): Always use LOC_AND_ADDRESS in MI output.
        * infrun.c (normal_stop): Remove MI specific frame printing treatment.

2007-03-29  Pedro Alves  <pedro_alves@portugalmail.pt>

        * arm-wince-tdep.c: New.
        * config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h.
        (MT_CFLAGS): Delete.
        (TM_CLIBS): Delete.
        (TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o,
        solib-legacy.o, solib-svr4.o, and remove wince.o.
        * configure.tgt (arm*-*-mingw32ce*): Add.
        * signals/signals.c [HAVE_SIGNAL_H]: Check.
        (do_target_signal_to_host): Silence 'not used' warning.
        * config/arm/tm-wince.h: Remove.

2007-03-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * arch-utils.c (legacy_pc_in_sigtramp): Remove.
        * arch-utils.h (legacy_pc_in_sigtramp): Remove.

        * config/ia64/linux.mt (DEPRECATED_TM_FILE): Remove.
        * config/ia64/tm-linux.h: Remove file.
        * ia64-tdep.h (struct gdbarch_tdep): Add pc_in_sigtramp callback.
        * ia64-tdep.c (ia64_sigtramp_frame_sniffer): Use it instead of
        legacy_pc_in_sigtramp.
        (ia64_gdbarch_init): Initialize tdep->pc_in_sigtramp.
        * ia64-linux-tdep.c (ia64_linux_pc_in_sigtramp): Make static.
        Remove func_name argument.
        (ia64_linux_init_abi): Install it as tdep->pc_in_sigtramp.

        * infrun.c (HAVE_STEPPABLE_WATCHPOINT): Do not redefine.
        * target.c (update_current_target): Add to_have_steppable_watchpoint.
        * target.h (struct target_ops):  Add to_have_steppable_watchpoint.
        (HAVE_STEPPABLE_WATCHPOINT): Define.

        * config/ia64/linux.mh (NATDEPFILES): Remove core-aout.o.
        * config/ia64/nm-linux.h (KERNEL_U_ADDR, U_REGS_OFFSET,
        CANNOT_FETCH_REGISTER, CANNOT_STORE_REGISTER,
        TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_STEPPABLE_WATCHPOINT,
        STOPPED_BY_WATCHPOINT, target_stopped_data_address,
        target_insert_watchpoint, target_remove_watchpoint): Remove.
        (FETCH_INFERIOR_REGISTERS): Define.
        * ia64-linux-nat.c (ia64_register_addr): Make static.
        (ia64_cannot_fetch_register, ia64_cannot_store_register): Likewise.
        (ia64_linux_insert_watchpoint): Make static.  Remove ptid_p argument.
        (ia64_linux_remove_watchpoint): Likewise.  Add type argument.
        (ia64_linux_stopped_data_address): Make static.  Add target_ops.
        (ia64_linux_stopped_by_watchpoint): Make static.
        (ia64_linux_can_use_hw_breakpoint): New function.
        (ia64_linux_fetch_register, ia64_linux_fetch_registers): Likewise.
        (ia64_linux_store_register, ia64_linux_store_registers): Likewise.
        (_initialize_ia64_linux_nat): Install register and watchpoint ops.

2007-03-28  Pedro Alves  <pedro_alves@portugalmail.pt>

        * linespec.c: Include language.h.
        (find_methods): Add language parameter.  Call
        lookup_symbol_in_language.  Pass language down.
        (add_matching_methods): Likewise.  Call
        lookup_symbol_in_language.
        (add_constructors): Likewise.
        (find_method): Pass sym_class to collect_methods.
        (collect_methods): Add sym_class parameter.  Pass language
        down.
        * symtab.c (lookup_symbol): Rename to ...
        (lookup_symbol_in_language): ... this.  Add language
        parameter.  Use passed language instead of current_language.
        (lookup_symbol): New as wrapper around
        lookup_symbol_in_language.
        (lookup_symbol_aux): Add language parameter.  Use passed
        language instead of current_language.
        (search_symbols): Indent.
        * symtab.h (enum language): Forward declare.
        (lookup_symbol_in_language): Declare.
        (lookup_symbol): Update description.
        * ada-lang.h (lookup_symbol_in_language): Remove declaration.
        * ada-lang.c (restore_language): Remove.
        (lookup_symbol_in_language): Remove.

2007-03-27  Pedro Alves  <pedro_alves@portugalmail.pt>

        * breakpoint.c (bpstat_num): Add int *num parameter.
        * breakpoint.h (bpstat_num): Likewise.
        * infcmd.c (continue_command): Adjust to new bpstat_num
        interface.
        (program_info): Likewise.

2007-03-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/sh/tm-sh.h: Remove file.
        * config/sh/embed.mt (DEPRECATED_TM_FILE): Remove.
        * config/sh/linux.mt (DEPRECATED_TM_FILE): Remove.
        * config/sh/nbsd.mt (DEPRECATED_TM_FILE): Remove.
        * config/sh/tm-wince.h: Do not include "sh/tm-sh.h".

2007-03-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/sh/tm-sh.h (DEPRECATED_BIG_REMOTE_BREAKPOINT,
        DEPRECATED_LITTLE_REMOTE_BREAKPOINT): Remove.
        * remote.c: Remove code under #ifdef DEPRECATED_REMOTE_BREAKPOINT,
        DEPRECATED_BIG_REMOTE_BREAKPOINT, DEPRECATED_LITTLE_REMOTE_BREAKPOINT.
        * sh-tdep.c (sh_breakpoint_from_pc): Return remote breakpoint
        sequence if target_shortname is "remote".

2007-03-27  Anton Blanchard  <anton@samba.org>

        * rs6000-tdep.c (rs6000_frame_cache): Use tdep->lr_frame_offset
        instead of wordsize when looking for the LR in a stack frame.

2007-03-27  Andreas Schwab  <schwab@suse.de>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2-frame.c (dwarf2_frame_eh_frame_regnum): Rename to...
        (dwarf2_frame_adjust_regnum): ...this.  Make static.  Add eh_frame_p
        argument.  Update all callers.
        (struct dwarf2_frame_ops): Replace eh_frame_regnum with adjust_regnum.
        (dwarf2_frame_set_eh_frame_regnum): Rename to...
        (dwarf2_frame_set_adjust_regnum): ...this.  Update argument type.
        * dwarf2frame.h (dwarf2_frame_set_eh_frame_regnum): Rename to...
        (dwarf2_frame_set_adjust_regnum): ...this.
        (dwarf2_frame_eh_frame_regnum): Delete prototype.
        * rs6000-tdep.c: Include "dwarf2-frame.h".
        (rs6000_adjust_frame_regnum): Define.
        (rs6000_gdbarch_init): Enable use of DWARF CFI frame unwinder.
        Register rs6000_adjust_frame_regnum.

        * Makefile.in (rs6000-tdep.o): Update dependencies.

2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>

        * Makefile.in: Add support for a "pdf" target.

2007-03-27  Daniel Jacobowitz  <dan@codesourcery.com>

        * amd64-tdep.c (amd64_init_frame_cache): New function.
        (amd64_alloc_frame_cache, amd64_skip_prologue): Use it.

2007-03-26  Nigel Stephens  <nigel@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * ui-out.c (ui_out_field_core_addr): Truncate address to
        TARGET_ADDR_BIT size before printing.

2007-03-22  Nigel Stephens  <nigel@mips.com>
            Maciej W. Rozycki  <macro@mips.com>

        * remote-mips.c (mips_xfer_memory): Update prototype.

2007-03-22  Joel Brobecker  <brobecker@adacore.com>

        * symfile.h: #include "symtab.h"

2007-03-22  Denis Pilat  <denis.pilat@st.com>

        * utils.c (pagination_on_command, pagination_off_command):
        Remove useless prototypes.

2007-03-21  Pierre Muller  <muller@ics.u-strasbg.fr>

        Fix PR pascal/2232.
        * p-valprint.c (pascal_object_print_value): Use type_name_no_tag 
        instead of TYPE_NAME for object base class name.


2007-03-19  Kevin Buettner  <kevinb@redhat.com>

        * mep-tdep.c (mep_analyze_frame_prologue, mep_frame_this_id):
        Specify frame type in calls to frame_func_unwind().

2007-03-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * rs6000-tdep.c (rs6000_skip_prologue): Use skip_prologue_using_sal.
        (rs6000_in_function_epilogue_p): Use extract_unsigned_integer.
        (refine_prologue_limit): Delete.
        (skip_prologue): Don't call it.  Use extract_unsigned_integer.
        Assume lim_pc is set.  Correct check for incomplete prologues.
        Do not skip clobbers of the frame pointer.
        * symtab.c (skip_prologue_using_sal): Fail if there is only one
        sal.

2007-03-13  Nathan Froyd  <froydnj@codesourcery.com>

        * frame.c (frame_pop): Check to see whether there's a frame to
        which we can pop first.

2007-03-13  Nathan Froyd  <froydnj@codesourcery.com>

        * MAINTAINERS (Write After Approval): Add myself.

2007-03-09  Markus Deuling  <deuling@de.ibm.com>

        * infrun.c (breakpoints_failed): Remove unnecessary variable.
        (handle_inferior_event): Remove unnecessary braces.
        * breakpoint.c (bpstat_what): Remove wrong comment.

2007-03-09  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-tdep.c (spu_in_function_epilogue_p): New function.
        (spu_gdbarch_init): Install it.

2007-03-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-linux-nat.c (spu_xfer_partial): Return -1 for unsupported
        object types, not 0.

2007-03-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-tdep.c (spu_frame_align): New function.
        (spu_gdbarch_init): Install it.  Set call dummy location to ON_STACK.

2007-03-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-tdep.c (spu_unwind_pc): Mask off interrupt enable bit.
        (spu_software_single_step): Likewise.
        (spu_read_pc, spu_write_pc): New functions.
        (spu_gdbarch_init): Install them.

2007-03-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * cli/cli-dump.c (struct callback_data): load_offset needs to 
        have signed long type.

2007-03-07  Joel Brobecker  <brobecker@adacore.com>

        * mips-tdep.c (mips_insn16_frame_cache, mips_insn32_frame_sniffer):
        Revert the previous change that had some unexpected side-effects
        on mips32.
        (mips_insn16_frame_cache, mips_insn32_frame_cache): Use the proper
        function to get the address of the calling instruction.

2007-03-07  Denis Pilat  <denis.pilat@st.com>

        * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Replace
        get_selected_frame by deprecated_safe_get_selected_frame.

2007-03-02  Mark Kettenis  <kettenis@gnu.org>

        * shnbsd-tdep.c: Include "regset.h", "gdb_assert.h" and
        "gdb_string.h".  Don't include "nbsd-tdep.h".
        (SIZEOF_STRUCT_REG): Remove.
        (SHNBSD_SIZEOF_GREGS): New.
        (shnbsd_supply_gregset, shnbsd_collect_gregset)
        (shnbsd_regset_from_core_section): New functions.
        (fetch_core_registers, fetch_elfcore_registers): Remove functions.
        (shnbsd_supply_reg, shnbsd_fill_reg): Simply call
        shnbsd_supply_gregset, shnbsd_collect_gregset.
        (shnbsd_gregset): New variable.
        (shnbsd_init_abi): Set regset_from_core_section.
        (GDB_OSABI_NETBSD_CORE): New define.
        (shnbsd_core_osabi_sniffer): New function.
        (_initialize_shnbsd_tdep): Register shnbsd_core_osabi_sniffer.
        * Makefile.in (shnbsd-tdep.o): Update dependencies.
        * config/sh/nbsd.mt (TDEPFILES): Add corelow.o, remove
        nbsd-tdep.o.
        * config/sh/obsd.mt (TDEPFILES): Remove nbsd-tdep.o.

2007-02-28  Joel Brobecker  <brobecker@adacore.com>

        * gdbtypes.c (replace_type): Fix typo that caused us to not update
        length of the types referenced by the new type CV ring.

2007-02-28  Daniel Jacobowitz  <dan@codesourcery.com>

        * frame.c (frame_pop, frame_observer_target_changed): Call
        reinit_frame_cache.
        (flush_cached_frames): Rename to reinit_frame_cache and delete
        old implementation.
        * frame.h (flush_cached_frames): Delete prototype and update comment.

        * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): Call
        reinit_frame_cache instead of flush_cached_frames.  Do not call
        select_frame after reinit_frame_cache.
        * corelow.c (core_open): Likewise.
        * gdbarch.sh (deprecated_current_gdbarch_select_hack): Likewise.
        * infrun.c (prepare_to_proceed, context_switch)
        (handle_inferior_event): Likewise.
        * linux-fork.c (fork_load_infrun_state): Likewise.
        * ocd.c (ocd_start_remote): Likewise.
        * remote-e7000.c (e7000_start_remote): Likewise.
        * remote-mips.c (device): Likewise.
        * thread.c (switch_to_thread): Likewise.
        * tracepoint.c (finish_tfind_command): Likewise.
        * gdbarch.c: Regenerated.

2007-02-28  Jerome Guitton  <guitton@adacore.com>
            Joel Brobecker  <brobecker@adacore.com>

        * gdbtypes.c (check_typedef): Do not replace stub type if
        the resolved type is not defined in the same objfile.

2007-02-28  Daniel Jacobowitz  <dan@codesourcery.com>

        * top.c (gdb_readline_wrapper_cleanup): Remove invalid assertion.

2007-02-28  Joel Brobecker  <brobecker@adacore.com>

        * stabsread.c (define_symbol): Create an associated STRUCT_DOMAIN
        symbol for Ada units when the symbol is defined using 't' rather
        than 'Tt' as symbol descriptor.

2007-02-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/mips/tm-nbsd.h: Delete file.
        * config/mips/nbsd.mt (DEPRECATED_TM_FILE): Remove.
        * config/sh/tm-nbsd.h: Delete file.
        * config/sh/nbsd.mt (DEPRECATED_TM_FILE): Set to tm-sh.h.

2007-02-28  Joel Brobecker  <brobecker@adacore.com>

        * mi/mi-cmd-var.c (varobj_update_one): Remove reference to
        unused WRONG_PARAM value since it was recently deleted.

2007-02-28  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c (varobj_update): Free temporary vectors.

2007-02-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/powerpc/linux.mt (DEPRECATED_TM_FILE): Set to tm-ppc-eabi.h.
        * config/powerpc/tm-linux.h: Delete file.
        * config/powerpc/tm-ppc-eabi.h: Do not include "rs6000/tm-rs6000.h".
        (PROCESS_LINENUMBER_HOOK): Do not undefine.
        (TEXT_SEGMENT_BASE): Do not redefine.
        * config/rs6000/nm-rs6000.h (CHILD_SPECIAL_WAITSTATUS): Move here
        from config/rs6000/tm-rs6000.h.
        (TARGET_CREATE_INFERIOR_HOOK, rs6000_create_inferior): Likewise.
        * config/rs6000/tm-rs6000.h (struct frame_info): Remove declaration.
        (TEXT_SEGMENT_BASE): Remove.
        (IN_SOLIB_RETURN_TRAMPOLINE): Remove.
        (rs6000_in_solib_return_trampoline): Remove.
        (SKIP_TRAMPOLINE_CODE): Remove.
        (rs6000_skip_trampoline_code): Remove.
        (CHILD_SPECIAL_WAITSTATUS): Move to config/rs6000/nm-rs6000.h.
        (TARGET_CREATE_INFERIOR_HOOK, rs6000_create_inferior): Likewise.
        (FP0_REGNUM): Remove.
        (rs6000_find_toc_address_hook): Move to rs6000-tdep.h.
        (rs6000_set_host_arch_hook): Remove.
        * Makefile.in (rs6000-nat.o): Add dependency on $(rs6000_tdep_h).
        (rs6000-aix-tdep.o): Add dependency on $(ppc_tdep_h).
        * ppc-tdep.h (struct gdbarch_tdep): Add field text_segment_base.
        * rs6000-aix-tdep.c: Include "ppc-tdep.h".
        (rs6000_aix_init_osabi): Set text_segment_base tdep field.
        * rs6000-nat.c: Include "rs6000-tdep.h".
        (exec_one_dummy_insn): Replace TEXT_SEGMENT_BASE by tdep field.
        (set_host_arch): Rename to ...
        (rs6000_create_inferior): ... this.  Make public.
        (_initialize_core_rs6000): Do not set rs6000_set_host_arch_hook.
        * rs6000-tdep.c (rs6000_set_host_arch_hook): Remove.
        (rs6000_create_inferior): Remove.
        (branch_dest): Replace TEXT_SEGMENT_BASE by tdep field.
        (rs6000_gdbarch_init): Call set_gdbarch_fp0_regnum,
        set_gdbarch_in_solib_return_trampoline, and
        set_gdbarch_skip_trampoline_code.
        * rs6000-tdep.h (rs6000_find_toc_address_hook): Move here
        from config/rs6000/tm-rs6000.h.

2007-02-27  Joel Brobecker  <brobecker@adacore.com>

        * buildsym.c (record_producer): Do nothing if no producer is provided.

2007-02-27  Nick Roberts  <nickrob@snap.net.nz>

        * varobj.c (varobj_update): Remove unused local.  Use gdb_assert
        to check changelist is non-NULL.  Call error if the frontend tries
        to update a non-root variable.

        * varobj.h (enum varobj_update_error): Delete WRONG_PARAM value.

2007-02-27  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2-frame.c (dwarf2_frame_cache, dwarf2_frame_this_id)
        (dwarf2_frame_sniffer): Update.
        (dwarf2_signal_frame_this_id): New function.
        (dwarf2_signal_frame_unwind): Use it.
        (dwarf2_frame_base_sniffer): Use frame_unwind_address_in_block.
        * frame.c (frame_func_unwind): Add this_type argument.
        (get_frame_func): Update.
        (frame_unwind_address_in_block): Add this_type argument and check it.
        Fix a typo.
        (get_frame_address_in_block): Update.
        * frame.h (enum frame_type): Move higher in the file.
        (frame_unwind_address_in_block, frame_func_unwind): Add enum frame_type
        argument.

        * alpha-mdebug-tdep.c, alpha-tdep.c, amd64-tdep.c, amd64obsd-tdep.c,
        arm-tdep.c, avr-tdep.c, cris-tdep.c, frv-tdep.c, h8300-tdep.c,
        hppa-tdep.c, i386-tdep.c, i386obsd-tdep.c, ia64-tdep.c,
        libunwind-frame.c, m32c-tdep.c, m32r-linux-tdep.c, m32r-tdep.c,
        m68hc11-tdep.c, m68k-tdep.c, m88k-tdep.c, mips-mdebug-tdep.c,
        mips-tdep.c, mn10300-tdep.c, mt-tdep.c, rs6000-tdep.c, s390-tdep.c,
        score-tdep.c, sh-tdep.c, sh64-tdep.c, sparc-tdep.c,
        sparc64obsd-tdep.c, spu-tdep.c, v850-tdep.c, vax-tdep.c,
        xstormy16-tdep.c, xtensa-tdep.c: Update calls to
        frame_func_unwind and frame_unwind_address_in_block to specify
        the frame type.  Use frame_unwind_address_in_block instead of
        frame_pc_unwind in sniffers.

2007-02-27  Daniel Jacobowitz  <dan@codesourcery.com>

        * frame.c (deprecated_selected_frame): Rename to...
        (selected_frame): ...this.  Make static.
        (get_selected_frame, select_frame): Update.
        * frame.h (deprected_select_frame): Delete.
        (deprecated_safe_get_selected_frame): Update comments.

        * breakpoint.c, cli/cli-cmds.c, f-valprint.c, infcmd.c, inflow.c,
        infrun.c, stack.c, tui/tui-disasm.c, tui/tui-source.c,
        tui/tui-winsource.c, valops.c, varobj.c, findvar.c, macroscope.c,
        parse.c, regcache.h, sh64-tdep.c, tui/tui-hooks.c, tui/tui-win.c,
        tui/tui.c: Replace references to deprecated_selected_frame.

2007-02-27  Fred Fish  <fnf@specifix.com>

        * rs6000-tdep.c (skip_prologue): Recognize addi instructions that 
        directly decrement the stack pointer, accumulate their operand into 
        the stack offset, and mark the function as not being frameless.

2007-02-26  Daniel Jacobowitz  <dan@codesourcery.com>

        * arch-utils.c (selected_byte_order): New.
        * arch-utils.h (selected_byte_order): New prototype.
        * remote-sim.c (gdbsim_open): Use selected_byte_order.

2007-02-26  Daniel Jacobowitz  <dan@codesourcery.com>

        * symfile.c (place_section): Check SEC_ALLOC.  Do not check VMA.
        (default_symfile_offsets): Check VMA here.  Update section VMAs.

2007-02-26  Daniel Jacobowitz  <dan@codesourcery.com>

        * remote.c (init_remote_state): Add special handling for placeholder
        registers.

2007-02-26  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (XMLFILES): Include $(TDEP_XML).
        (filenames_h): New variable.
        (clean): Clean up xml-builtin.c and stamp-xml.
        (arm-linux-nat.o): Update.
        * config/arm/linux.mh (TDEP_XML): Define.
        * arm-linux-nat.c (PTRACE_GETWMMXREGS, PTRACE_SETWMMXREGS): Define.
        (arm_linux_has_wmmx_registers): New.
        (GET_THREAD_ID): Fix typo.
        (IWMMXT_REGS_SIZE): Define.
        (fetch_wmmx_regs, store_wmmx_regs): New.
        (arm_linux_fetch_inferior_registers): Use fetch_wmmx_regs.
        (arm_linux_store_inferior_registers): Use store_wmmx_regs.
        (super_xfer_partial, arm_linux_xfer_partial): New.
        (_initialize_arm_linux_nat): Use them.
        * xml-support.c (fetch_xml_builtin): Move outside HAVE_LIBEXPAT.
        (xml_builtin_xfer_partial): New function.
        * xml-support.h (xml_builtin_xfer_partial): New prototype.
        * NEWS: Update mention of iWMMXt support.

2007-02-26  Daniel Jacobowitz  <dan@codesourcery.com>

        * arm-tdep.c (arm_scan_prologue): Do not record FPA register saves
        if there are no FPA registers.
        (arm_dwarf_reg_to_regnum): New function.
        (arm_register_type, arm_register_name): Return minimal values for
        unsupported registers.
        (arm_register_sim_regno): Handle iWMMXt registers.
        (arm_gdbarch_init): Record missing FPA registers if indicated by
        a target description.  Recognize iWMMXt registers.  Only register
        "info float" for FPA.  Use ARM_NUM_REGS.  Register
        arm_dwarf_reg_to_regnum.
        * arm-tdep.h (enum gdb_regnum): Add ARM_NUM_REGS and iWMMXt
        constants.
        (struct gdbarch_tdep): Add have_fpa_registers.
        * features/xscale-iwmmxt.xml: Update capitalization.
        * regformats/arm-with-iwmmxt.dat: Regenerated.

2007-02-24  Kevin Buettner  <kevinb@redhat.com>

        * NEWS (New targets): Add entry for the Toshiba Media Processor.

2007-02-23  Kevin Buettner  <kevinb@redhat.com>

        * MAINTAINERS (mep): New target.

2007-02-23  Kevin Buettner  <kevinb@redhat.com>

        From Jim Blandy, Dave Brolley, Kevin Buettner, Don Howard, and
        Richard Sandiford:
        * Makefile.in (elf_mep_h, mep_desc_h, mep_opc_h): New variables.
        (mep-tdep.o): New rule.
        * configure.tgt (mep-*-*): New target.
        * mep-tdep.c: New file.
        * config/mep/mep.mt: New file.

2007-02-22  Markus Deuling  <deuling@de.ibm.com>

        * infrun.c (inferior_stop_reason, print_stop_reason): Remove
        BREAKPOINT_HIT and STOP_UNKNOWN.

2007-02-22  Markus Deuling  <deuling@de.ibm.com>

        * valops.c (value_ind): Fix unary * handling of TYPE_CODE_INT. 

2007-02-20  Joel Brobecker  <brobecker@adacore.com>

        * gdb_expat.h (XMLCALL): Define if not already defined.

2007-02-20  Andreas Schwab  <schwab@suse.de>

        * Makefile.in (symfile.o): Update dependencies.

2007-02-20  Daniel Jacobowitz  <dan@codesourcery.com>

        * MAINTAINERS: Disable -Werror for cris simulator.  Build
        sparc64-solaris2.10 instead of the broken sparc-elf.
        * solib-frv.c: Include "solib.h".
        * Makefile.in (solib-frv.o): Update.
        * mt-tdep.c (mt_gdbarch_init): Correct typo in floatformats patch.
        * xtensa-tdep.c (xtensa_regset_from_core_section): Cast size_t to int.
        (xtensa_frame_this_id, xtensa_frame_prev_register)
        (xtensa_push_dummy_call): Use %p.

2007-02-16  Daniel Jacobowitz  <dan@codesourcery.com>

        * avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c,
        ia64-tdep.c, m68k-tdep.c, mips-linux-tdep.c, ppcobsd-tdep.c,
        sparc-linux-tdep.c: Include "gdbtypes.h" instead of "floatformat.h".
        * Makefile.in (avr-tdep.o, hppabsd-tdep.o, hppa-tdep.o, i386-tdep.o)
        (ia64-tdep.o, m68k-tdep.o, mips-linux-tdep.o, ppcobsd-tdep.o)
        (sparc-linux-tdep.o): Update.

2007-02-15  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.h (xtensa_reg_mask_t): New.
        (xtensa_mask_t): Change mask field to be a separate array.
        * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read)
        (xtensa_pseudo_register_write, xtensa_unwind_pc)
        (xtensa_unwind_dummy_id, xtensa_push_dummy_call)
        (xtensa_breakpoint_from_pc): Remove implicit type casting.
        * xtensa-config.c (mask0, mask1, mask2, mask3, mask4, mask5)
        (mask6, mask7, mask8, mask9, mask10, mask11, mask12, mask13)
        (mask14, mask15): Rename to
        (xtensa_mask0, xtensa_mask1, xtensa_mask2, xtensa_mask3)
        (xtensa_mask4, xtensa_mask5, xtensa_mask6, xtensa_mask7)
        (xtensa_mask8, xtensa_mask9, xtensa_mask10, xtensa_mask11)
        (xtensa_mask12, xtensa_mask13, xtensa_mask14, xtensa_mask15): this.
        (xtensa_submask0, xtensa_submask1, xtensa_submask2, xtensa_submask3)
        (xtensa_submask4, xtensa_submask5, xtensa_submask6, xtensa_submask7)
        (xtensa_submask8, xtensa_submask9, xtensa_submask10)
        (xtensa_submask11, xtensa_submask12, xtensa_submask13)
        (xtensa_submask14, xtensa_submask15): New.
        (rmap): Follow strict aliasing rules doing static initialization.

2007-02-13  Daniel Jacobowitz  <dan@codesourcery.com>

        * target-descriptions.c (tdesc_named_type): Move code_ptr and data_ptr
        handling from here...
        (tdesc_register_type): ...to here.
        * xml-tdesc.c (tdesc_start_reg): Allow code_ptr and data_ptr.
        * features/arm-core.xml: Use code_ptr and data_ptr.

2007-02-13  Denis Pilat  <denis.pilat@st.com>

        * varobj.h (enum varobj_update_error): New enum.
        * varobj.c (struct varobj_root): Add is_valid member.
        (varobj_get_type): Check for invalid varobj.
        (varobj_get_attributes): Likewise.
        (variable_editable):Likewise.
        (varobj_update): Likewise.  Use varobj_update_error.
        (new_root_variable): Set root varobj as valid by default.
        (varobj_invalidate): New function.
        * symfile.c (clear_symtab_users): Use varobj_invalidate.
        * mi/mi-cmd-var.c (varobj_update_one): Change return type to void.
        Use varobj_update_error.

2007-02-12  Pierre Muller  <muller@ics.u-strasbg.fr>

        Fix PR pascal/2223.
        * dwarfread.c (set_cu_language): Recognize DW_LANG_Pascal83 as
        Pascal language marker.
        * dwarf2read.c (set_cu_language): Likewise.

2007-02-12  Corinna Vinschen  <vinschen@redhat.com>

        * win32-nat.c (win32_wait): Reset terminal pgrp to GDB.
        (do_initial_win32_stuff): Call terminal_init_inferior_with_pgrp
        instead of target_terminal_init since inferior_ptid isn't set yet.

2007-02-10  Pedro Alves  <pedro_alves@portugalmail.pt>

        * MAINTAINERS (Write After Approval): Add myself.

2007-02-09  Fred Fish  <fnf@specifix.com>

        Based on work by Apple Computer, Inc.
        * event-top.c (async_request_quit): Call quit() whenever either
        quit_flag is set or immediate_quit is set.

2007-02-09  Gabriel Dos Reis  <gdr@integrable-solutions.net>

        * ada-lang.c (remove_out_of_scope_renamings): Change third parameter's
        type to a pointer to const struct block.
        (ada_lookup_symbol_list): Don't cast away constness when calling
        remove_out_of_scope_renamings.

2007-02-09  Gabriel Dos Reis  <gdr@integrable-solutions.net>

        * linux-nat.c (linux_nat_find_memory_regions): Don't check the
        address of 'filename'; it is always non null.

2007-02-09  Joel Brobecker  <brobecker@adacore.com>

        * exec.c (add_to_section_table): Do not discard empty sections.

2007-02-08  Daniel Jacobowitz  <dan@codesourcery.com>

        * features/Makefile, features/arm-with-iwmmxt.xml,
        features/gdbserver-regs.xsl, features/number-regs.xsl,
        features/sort-regs.xsl, features/xscale-iwmmxt.xml: New files.
        * regformats/arm-with-iwmmxt.dat: Generate.
        * NEWS: Mention iWMMXt.

2007-02-08  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (arm-tdep.o, eval.o, target-descriptions.o)
        (xml-tdesc.o): Update.
        * xml-support.c: Add a comment.
        (gdb_xml_enums_boolean): New variable.
        (gdb_xml_parse_attr_enum): Use strcasecmp.
        * xml-support.h (gdb_xml_enums_boolean): Declare.
        * xml-tdesc.c (struct tdesc_parsing_data): Record current_feature,
        next_regnum, and current_union.
        (tdesc_start_feature, tdesc_start_reg, tdesc_start_union)
        (tdesc_end_union, tdesc_start_field, tdesc_start_vector)
        (field_attributes, union_children, reg_attributes, union_attributes)
        (vector_attributes, feature_attributes, feature_children): New.
        (target_children): Make static.  Add <feature>.
        (tdesc_elements): Make static.
        * target-descriptions.c (struct tdesc_reg, tdesc_reg_p, type_p)
        (struct tdesc_feature, tdesc_feature_p): New types.
        (struct target_desc): Add features member.
        (struct tdesc_arch_data, tdesc_data): New.
        (target_find_description): Clarify error message.  Warn about
        ignored register descriptions.
        (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name)
        (tdesc_named_type, tdesc_data_init, tdesc_data_alloc)
        (tdesc_data_cleanup, tdesc_numbered_register)
        (tdesc_numbered_register_choices, tdesc_find_register)
        (tdesc_register_name, tdesc_register_type)
        (tdesc_remote_register_number, tdesc_register_reggroup_p)
        (set_tdesc_pseudo_register_name, set_tdesc_pseudo_register_type)
        (set_tdesc_pseudo_register_reggroup_p, tdesc_use_registers)
        (tdesc_free_reg, tdesc_create_reg, tdesc_free_feature)
        (tdesc_create_feature, tdesc_record_type): New.
        (free_target_description): Free features.
        (_initialize_target_descriptions): Initialize tdesc_data.
        * arch-utils.c (default_remote_register_number): New.
        * arch-utils.h (default_remote_register_number): New prototype.
        * target-descriptions.h (set_tdesc_pseudo_register_name)
        (set_tdesc_pseudo_register_type, set_tdesc_pseudo_register_reggroup_p)
        (tdesc_use_registers, tdesc_data_alloc, tdesc_data_cleanup)
        (tdesc_numbered_register, tdesc_numbered_register_choices)
        (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name)
        (tdesc_named_type, tdesc_create_feature, tdesc_record_type)
        (tdesc_create_reg): Declare.
        * gdbarch.sh (remote_register_number): New entry.
        * gdbarch.c, gdbarch.h: Regenerate.
        * remote.c (init_remote_state): Use gdbarch_remote_register_number.
        * features/gdb-target.dtd: Add feature, reg, vector, union, and field.

        * arm-tdep.c (arm_register_aliases): New.
        (arm_register_name_strings): Rename to...
        (arm_register_names): ...this.  Make const.  Delete the old version.
        (current_option, arm_register_byte): Delete.
        (set_disassembly_style): Simplify.  Do not adjust arm_register_names.
        (value_of_arm_user_reg): New.
        (arm_gdbarch_init): Verify any described registers.  Call
        tdesc_use_registers.  Don't use arm_register_byte.  Create aliases
        for standard register names.
        (_initialize_arm_tdep): Do not adjust arm_register_names.
        * user-regs.c (struct user_reg): Add baton member.
        (append_user_reg, user_reg_add_builtin, user_regs_init)
        (user_reg_add, value_of_user_reg): Use a baton for user
        register functions.
        * std-regs.c: Update.
        * user-regs.h (user_reg_read_ftype, user_reg_add_builtin)
        (user_reg_add): Add baton argument.
        * NEWS: Mention target description register support.
        * features/arm-core.xml, features/arm-fpa.xml: New.
        * eval.c (evaluate_subexp_standard): Allow ptype $register
        when the program is not running.

2007-02-09  Nick Roberts  <nickrob@snap.net.nz>

        * mi/mi-cmd-var.c (mi_cmd_var_create):  Add value field.

2007-02-08  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * rs6000-tdep.c (gdb_print_insn_powerpc): Set
        info->disassembler_options to "any".

2007-02-08  Daniel Jacobowitz  <dan@codesourcery.com>

        * varobj.c (install_new_value): Only call value_get_print_value
        if changeable.

2007-02-08  Daniel Jacobowitz  <dan@codesourcery.com>

        Reported by timeless@gmail.com:
        * gdb/target.c (target_flash_erase): Do not return void value.
        (target_flash_done): Likewise.
        * gdb/cli/cli-cmds.c (source_command): Likewise.

2007-02-08  Fred Fish  <fnf@specifix.com>

        Based on work by Apple Computer, Inc.
        * event-top.c (handle_sigint): Set quit_flag.
        (async_request_quit): Don't set quit_flag.  Avoid calling quit()
        if quit_flag has already been reset.

2007-02-08  Daniel Jacobowitz  <dan@codesourcery.com>

        * ser-mingw.c (pipe_windows_close): Move variable initialization back
        up.

2007-02-08  Fred Fish  <fnf@specifix.com>

        * defs.h (request_quit): Remove declaration.
        * utils.c (request_quit): Remove definition.

2007-02-08  Joel Brobecker  <brobecker@gnat.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * rs6000-tdep.c (bl_to_blrl_insn_p): New function.
        (skip_prologue): Allow bl->blrl used by PIC code.

2007-02-08  Mark Kettenis  <kettenis@gnu.org>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * cp-valprint.c (cp_print_value_fields, cp_print_value): Always
        initialize tmp_obstack.
        * p-valprint.c (pascal_object_print_value_fields)
        (pascal_object_print_value): Likewise.

2007-02-08  Daniel Jacobowitz  <dan@codesourcery.com>

        * features/feature_to_c.sh: Use %s to avoid problems with nawk.

2007-02-08  Mark Kettenis  <kettenis@gnu.org>

        * sparcnbsd-tdep.c: Include "gdbtypes.h" instead of "floatformat.h".
        * Makefile.in (sparcnbsd-tdep.o): Update dependencies.

2007-02-07  Daniel Jacobowitz  <dan@codesourcery.com>

        * xml-tdesc.c (struct tdesc_xml_cache, tdesc_xml_cache_s)
        (xml_cache): New.
        (tdesc_parse_xml): Cache expanded descriptions.

2007-02-07  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (XMLFILES): New.
        (COMMON_OBS): Add xml-builtin.o.
        (xml-builtin.c, stamp-xml): New rules.
        (xml-tdesc.o): Update.
        * features/feature_to_c.sh: New file.
        * xml-support.c (MAX_XINCLUDE_DEPTH): Define.
        (struct gdb_xml_parser): Add dtd_name and is_xinclude.
        (gdb_xml_start_element): Initialize scope after possibly reallocating
        scopes.  Move cleanup later.  Handle the XInclude description
        specially.
        (gdb_xml_end_element): Only parse the body if there is a current element.
        Call XML_DefaultCurrent if there is no element.
        (gdb_xml_fetch_external_entity, gdb_xml_use_dtd): New.
        (struct xinclude_parsing_data, xinclude_start_include)
        (xinclude_end_include, xml_xinclude_default)
        (xml_xinclude_start_doctype, xml_xinclude_end_doctype)
        (xml_xinclude_xml_decl, xml_xinclude_cleanup, xinclude_attributes)
        (xinclude_elements, xml_process_xincludes, fetch_xml_builtin): New.
        * xml-support.h (xml_fetch_another, xml_process_xincludes)
        (fetch_xml_builtin, xml_builtin, gdb_xml_use_dtd): New declarations.
        * xml-tdesc.c (tdesc_parse_xml): Add fetcher_baton argument.  Expand
        XInclude directives.  Use the compiled in DTD.
        (fetch_xml_from_file): Add baton argument.  Treat it as a containing
        directory name.  Do not warn here.
        (file_read_description_xml): Update call.  Warn here instead.  Pass
        a dirname as baton.
        (fetch_available_features_from_target): New.
        (target_read_description_xml): Use it.
        * features/gdb-target.dtd: Add copyright notice.  Use xinclude.dtd
        to handle XInclude.
        * features/xinclude.dtd: New file.

2007-02-05  Daniel Jacobowitz  <dan@codesourcery.com>

        * linux-thread-db.c (check_for_thread_db): Return early if we have
        no libthread_db support.

2007-02-05  Daniel Jacobowitz  <dan@codesourcery.com>

        * mi/mi-parse.h: Include <sys/time.h>.

2007-02-05  Nick Roberts  <nickrob@snap.net.nz>

        * mi/mi-cmd-stack.c (list_args_or_locals): Use common_val_print
        instead of print_variable_value to print values.

2007-02-03  Nick Roberts  <nickrob@snap.net.nz>

        * mi/mi-main.c: Numerous formatting changes.
        (mi_cmd_data_write_register_values): Replace clause inadvertantly
        removed in my previous change.

2007-02-03   Eli Zaretskii  <eliz@gnu.org>

        * mi/mi-main.c (mi_load_progress, timestamp, print_diff_now):
        Use 1000000L instead of 1000000.

2007-02-03  Nick Roberts  <nickrob@snap.net.nz>

            Based on work by Apple Computer, Inc.

        * configure.ac: Test for sys/resource.h and getrusage.
        * configure, config.in: Regenerate.

        * mi/mi-main.c: Include <sys/resource.h> if present.
        (rusage): Declare if HAVE_GETRUSAGE.
        (current_command_ts, do_timings): New static variables.
        (timestamp, print_diff_now, print_diff, timeval_diff):
        New static timing functions.
        (mi_cmd_enable_timings): New function for new MI command.
        (captured_mi_execute_command, mi_execute_async_cli_command): 
        Call timing functions.

        * mi/mi-cmds.c (mi_cmds): Add entry for new MI command
        -enable-timings.

        * mi/mi-cmds.h (mi_cmd_enable_timings): New extern.

        * mi/mi-parse.h: (mi_timestamp): New structure.
        (mi_parse): Add mi_timestamp* member.

2007-02-02  Denis Pilat  <denis.pilat@st.com>

        * thread.c (make_cleanup_restore_current_thread): New function.
        (info_threads_command): Use of make_cleanup_restore_current_thread
        to restore the current thread and the selected frame.
        (restore_selected_frame): New function.
        (struct current_thread_cleanup): Add frame_id field.
        (do_restore_current_thread_cleanup): Add restoring of the selected
        frame.
        (make_cleanup_restore_current_thread): Likewise.
        (thread_apply_all_command): backup the selected frame while 
        entering the function and restore it at exit.
        (thread_apply_command): Likewise.

2007-02-02  Denis Pilat  <denis.pilat@st.com>

        * MAINTAINERS (Write After Approval): Add myself to the list.

2007-02-01  Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>

        * gdb/remote-m32r.sdi.c (m32r_fetch_register): Change PWD mask.
        (m32r_store_register): Ditto.

2007-01-30  Vladimir Prus  <vladimir@codesourcery.com>

        * ser-mingw.c (pipe_windows_open)
        (pipe_windows_read, pipe_windows_write): Declare
        variables at the top of the function.

2007-01-29  Daniel Jacobowitz  <dan@codesourcery.com>

        * doublest.c (floatformat_from_length): Use the right element from
        gdbarch floatformats.
        (floatformat_from_type, extract_typed_floating)
        (store_typed_floating): Likewise.
        * doublest.h: Remove declarations for undefined floatformat arrays.
        * gdbarch.sh (float_format, double_format, long_double_format): Change
        to pairs.
        (pformat): Update for pairs.
        * gdbarch.c, gdbarch.h: Regenerated.
        * gdbtypes.c (floatformats_ieee_single, floatformats_ieee_double)
        (floatformats_ieee_double_littlebyte_bigword)
        (floatformats_i387_ext, floatformats_m68881_ext, floatformats_arm_ext)
        (floatformats_ia64_spill, floatformats_ia64_quad, floatformats_vax_f)
        (floatformats_vax_d): New variables.
        (builtin_type_ieee_single, builtin_type_ieee_double)
        (builtin_type_arm_ext, builtin_type_ia64_spill)
        (builtin_type_ia64_quad): Replace arrays with individual types.
        (builtin_type_ieee_single_big, builtin_type_ieee_single_little)
        (builtin_type_ieee_double_big, builtin_type_ieee_double_little)
        (builtin_type_ieee_double_littlebyte_bigword, builtin_type_i960_ext)
        (builtin_type_m88110_ext, builtin_type_m88110_harris_ext)
        (builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword)
        (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little)
        (builtin_type_ia64_quad_big, builtin_type_ia64_quad_little): Delete
        unused and endian-specific types.
        (recursive_dump_type): Update for floatformat pairs.
        (build_flt): Move higher.  Handle bit == -1.  Take a floatformat pair.
        (build_gdbtypes): Use build_flt.
        (_initialize_gdbtypes): Update set of initialized types.
        * gdbtypes.h: Update declarations to match gdbtypes.c.
        (struct main_type): Store a pointer to two floatformats.
        * arch-utils.c (default_float_format, default_double_format): Delete.
        * arch-utils.h (default_float_format, default_double_format): Delete.

        * arm-tdep.c, avr-tdep.c, hppa-tdep.c, hppabsd-tdep.c, i386-tdep.c,
        ia64-tdep.c,  iq2000-tdep.c, m68k-tdep.c, m88k-tdep.c,
        mips-linux-tdep.c, mips-tdep.c, mt-tdep.c, ppcobsd-tdep.c,
        sparc-linux-tdep.c, sparc-tdep.c, sparcnbsd-tdep.c, spu-tdep.c,
        vax-tdep.c, alpha-tdep.c, ppc-sysv-tdep.c: Update.

2007-01-29  Joel Brobecker  <brobecker@adacore.com>

        * target.c (maintenance_print_target_stack): New function.
        (initialize_targets): Add new "maintenance print target-stack"
        command.

2007-01-28  Mark Kettenis  <kettenis@gnu.org>

        * dwarf2read.c (new_symbol): Handle DW_AT_decl_file being zero.

2007-01-27  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2loc.h (struct dwarf2_locexpr_baton): Change size to a long.
        (struct dwarf2_loclist_baton): Likewise.

2007-01-27  Eli Zaretskii  <eliz@gnu.org>

        * cli/cli-script.c: Include breakpoint.h.
        (build_command_line): Require arguments only for if and while
        commands.
        (get_command_line, execute_user_command, execute_control_command):
        Fix wording of warning messages.
        (print_command_lines): Print breakpoint commands.
        (execute_control_command): Call commands_from_control_command to
        handle the `commands' command inside a body of a flow-control
        command.
        (read_next_line): Recognize the `commands' command and build a
        command line structure for it.
        (recurse_read_control_structure, read_command_lines): Handle
        `commands' similarly to `if' and `while'.

        * breakpoint.c (get_number_trailer): Document the special meaning
        of NULL as the first argument PP.
        (commands_from_control_command): New function.

        * breakpoint.h (commands_from_control_command): Add prototype.

        * defs.h (commands_control): New enumerated value for enum
        command_control_type.

2007-01-26  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_exception_breakpoint_ops): Fix typo in function name.
        (ada_exception_sal): Update accordingly.

2007-01-26  Jan Kratochvil <jan.kratochvil@redhat.com>

        * c-valprint.c (c_val_print): Require strings to be of no-signed CHARs.
        * NEWS: Describe CHAR array vs. string identifcation rules.

2007-01-25  Paul Brook  <paul@codesourcery.com>

        * arm-tdep.c (arm_get_next_pc): Fix bitfield off-by-one error.

2007-01-24  Jim Blandy  <jimb@codesourcery.com>

        * dwarf2loc.c (dwarf2_evaluate_loc_desc): When the location
        expression is empty, bother to return the 'optimized out' value we
        construct.  (Thanks to Carl Burch.)

2007-01-24  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c (c_value_of_root, c_value_of_child)
        (cplus_describe_child): Don't call release_value.

2007-01-24  Thiemo Seufer  <ths@mips.com>

        * mips-linux-tdep.c (mips_linux_n64_rt_sigframe): Fix struct
        initialization.

2007-01-24  Vladimir Prus  <vladimir@codesourcery.com>

        Refactor getting children name, value and type access 
        for varobjs in C++.
        * varobj.c (get_type_deref): Remove.
        (adjust_value_for_child_access): New.
        (c_number_of_children): Use the above.
        (c_describe_child): Likewise.
        (enum accessibility): New.
        (match_accessibility): New function.
        (cplus_describe_child): New function.
        (cplus_name_of_child, cplus_value_of_child)
        (cplus_type_of_child): Reimplement in terms
        of cplus_describe_child.
        (cplus_number_of_children): Use 
        adjust_value_for_child_access.
        
2007-01-24  Vladimir Prus  <vladimir@codesourcery.com>

        Fix computation of the 'editable' attribute and
        value changeability for for references.
        * varobj.c (get_value_type): New function.
        (c_variable_editable): Use get_value_type.
        (varobj_value_is_changeable): Likewise.
                
2007-01-24  Joel Brobecker  <brobecker@adacore.com>

        * source.c (find_and_open_source): Try rewriting the source
        path inside filename if dirname is NULL.

2007-01-24  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (add_partial_symbol): Create an extra partial
        symbol in the VAR_DOMAIN for Ada structures, unions or enums.
        (new_symbol): Likewise for symbols.

2007-01-24  Nick Roberts  <nickrob@snap.net.nz>

        * mi/mi-main.c (mi_cmd_execute): Call free_all_values.

2007-01-23  Vladimir Prus  <vladimir@codesourcery.com>
        
        * value.c (value_primitive_field): Copy the full 'location' 
        contents, instead of assuming that copying ADDRESS will 
        bring over everything in the union.  Remove obsolete comment.
        
2007-01-23  Masaki Muranaka  <monaka@monami-software.com>

        * m32c-tdep.c (make_regs, m32c_analyze_prologue)
        (m32c_skip_trampoline_code, m32c_m16c_address_to_pointer)
        (m32c_m16c_pointer_to_address): Separate code from declarations.

2007-01-23  Nick Hudson  <nick.hudson@dsl.pipex.com>

        * target.c (update_current_target): Correct typo.

2007-01-22  Masaki Muranaka  <monaka@monami-software.com>

        * xstormy16-tdep.c (xstormy16_skip_prologue): Separate code from a
        declaration.

2007-01-11  Andrew Cagney  <cagney@redhat.com>
            Daniel Jacobowitz  <dan@codesourcery.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * dwarf2-frame.c (execute_cfa_program): New support of
        `DW_CFA_GNU_negative_offset_extended'.

2007-01-21  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Mention flash support for "load" and new remote packets.

2007-01-21  Markus Deuling  <deuling@de.ibm.com>

        * breakpoint.c (delete_command): Skip redundant loop iterations.

2007-01-21  Daniel Jacobowitz  <dan@codesourcery.com>

        * gdbarch.sh (register_type): Update comment.
        * gdbarch.h: Regenerated.
        * arch-utils.c (generic_register_size): Call register_type.
        * ia64-tdep.c (ia64_extract_return_value): Likewise.
        * m32c-tdep.c (check_for_saved): Likewise.
        * mips-tdep.c (mips_print_register, print_gp_register_row)
        (mips_print_registers_info): Likewise.
        * sh-tdep.c (sh_pseudo_register_read, sh_pseudo_register_write):
        Likewise.
        * sh64-tdep.c (sh64_pseudo_register_read, sh64_pseudo_register_write)
        (sh64_do_register, sh64_print_register)
        (sh64_media_print_registers_info): Likewise.
        * tui/tui-regs.c (tui_register_format): Likewise.

2007-01-21  Daniel Jacobowitz  <dan@codesourcery.com>

        * objfiles.h (ALL_PRIMARY_SYMTABS): Define.

        * ada-lang.c (symtab_for_sym, ada_lookup_symbol_list)
        (ada_lookup_symbol): Use ALL_PRIMARY_SYMTABS.
        * cp-support.c (make_symbol_overload_list_qualified): Likewise.
        * symtab.c (lookup_symbol_aux_block, lookup_symbol_aux_symtabs)
        (basic_lookup_transparent_type, find_pc_sect_symtab, search_symbols)
        (make_symbol_completion_list): Likewise.

2007-01-21  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * buildsym.c (end_symtab): Use preallocated symtab if available.
        Fill in SYMBOL_SYMTAB.
        * buildsym.h (struct subfile): Add symtab member.
        * dwarf2read.c (struct dwarf2_cu): Add line_header.
        (struct file_entry): Add symtab.
        (free_cu_line_header): New function.
        (read_file_scope): Use it.  Save line_header in the cu.  Process
        lines before DIEs.
        (add_file_name): Initialize new symtab member.
        (dwarf_decode_lines): Create symtabs for included files.
        (new_symbol): Set SYMBOL_SYMTAB.
        * symtab.c (lookup_symbol): Use SYMBOL_SYMTAB.
        (search_symbols): Likewise.
        * symtab.h (struct symbol): Add symtab member.
        (SYMBOL_SYMTAB): Define.

2007-01-20  Daniel Jacobowitz  <dan@codesourcery.com>

        * symfile.c (allocate_symtab): Remove INIT_EXTRA_SYMTAB_INFO.

2007-01-20  Daniel Jacobowitz  <dan@codesourcery.com>

        * arch-utils.c (show_endian): Correct reversed condition.

2007-01-19  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * MAINTAINERS (Write After Approval): Add myself.

2007-01-16  Daniel Jacobowitz  <dan@codesourcery.com>
            Vladimir Prus  <vladimir@codesourcery.com>

        Fix 'selected frame' varobjs.
        * varobj.c (struct varobj): Remove the error field.
        (varobj_set_value): Don't check var->error.
        (install_new_value): Don't set var->error.
        (varobj_update): Always pass the new value
        of the root via install_new_value.
        (create_child): Don't set error field.
        (new_variable): Likewise.
        (c_value_of_root): Always reevaluate the value
        of selected frame varobjs in the selected frame.
        Don't call reinit_frame_cache.

2007-01-15  Joel Brobecker  <brobecker@adacore.com>

        * source.c (_initialize_source): Improve the help text of
        the substitute-path commands.

2007-01-14  Mark Kettenis  <kettenis@gnu.org>

        * frv-tdep.c (frv_gdbarch_init, frv_register_name)
        (frv_breakpoint_from_pc, frv_gdbarch_adjust_breakpoint_address)
        (frv_skip_prologue): Remove prototypes.
        (frv_adjust_breakpoint_address): Renamed from
        frv_gdbarch_adjust_breakpoint_address.
        (frv_gdbarch_init): Adjust.

2007-01-13  Mark Kettenis  <kettenis@gnu.org>

        * gdbarch.sh (deprecated_extract_return_value)
        (deprecated_store_return_value): Remove.
        (extract_return_value, store_return_value): Remove default values.
        * gdbarch.c, gdbarch.h: Regenerate.
        * arch-utils.c, arch-utils.h (legacy_extract_return_value)
        (legacy_store_return_value): Remove.
        * regcache.c, regcache.h (deprecated_grub_regcache_for_registers):
        Remove.

        * mi/mi-main.c: Remove obsolete comment.

        * regcache.c, regcache.h (deprecated_register_bytes)
        (deprecated_read_register_bytes)
        (deprecated_write_register_bytes): Remove.

        * frame.c (get_frame_register_bytes, put_frame_register_bytes):
        Don't forget to move destination pointer.

2007-01-01  Mark Kettenis  <kettenis@gnu.org>

        * config/i386/nm-i386gnu.h (CHILD_PREPARE_TO_STORE): Remove.

2007-01-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-tdep.c (spu_analyze_prologue): Fix erroneous backtrace
        past entry function with recent newlib.

2007-01-11  Vladimir Prus  <vladimir@codesourcery.com>

        * gdb.texinfo (GDB/MI Variable Objects): Improve the 
        introduction.  Specify -var-update more exactly.

2007-01-11  Daniel Jacobowitz  <dan@codesourcery.com>

        * frame.c (get_prev_frame_1): Check PC_REGNUM before using it.

2007-01-10  Jim Blandy  <jimb@codesourcery.com>

        * MAINTAINERS (Global Maintainers): Ulrich Weigand has accepted
        the Global Maintainers' invitation to be a global maintainer.

2007-01-10  Daniel Jacobowitz  <dan@codesourcery.com>

        * infrun.c (singlestep_pc): New variable.
        (resume): Set singlestep_pc.
        (context_switch): Add a debugging message.  Flush the frame cache.
        (handle_inferior_event): Add debugging messages.  Handle thread
        hops when a software single step has completed.  Let context_switch
        handle flushing the frame cache.

2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Mention target descriptions, "set tdesc filename",
        "unset tdesc filename", "show tdesc filename", and
        qXfer:features:read.
        * arch-utils.c (choose_architecture_for_target): New function.
        (gdbarch_info_fill): Call it.
        * target-descriptions.c (struct property): Make members non-const.
        (struct target_desc): Add arch member.
        (target_description_filename): New variable.
        (target_find_description): Try via XML first.
        (tdesc_architecture): New.
        (free_target_description, make_cleanup_free_target_description): New.
        (set_tdesc_property): Call xstrdup.
        (set_tdesc_architecture, tdesc_set_cmdlist, tdesc_show_cmdlist)
        (tdesc_unset_cmdlist, unset_tdesc_cmd, unset_tdesc_filename_cmd)
        (set_tdesc_cmd, show_tdesc_cmd, set_tdesc_filename_cmd)
        (show_tdesc_filename_cmd, _initialize_target_descriptions): New.
        * target-descriptions.h (tdesc_architecture)
        (make_cleanup_free_target_description, set_tdesc_architecture): New
        prototypes.
        * Makefile.in (SFILES): Add xml-tdesc.c.
        (COMMON_OBS): Add xml-tdesc.o.
        (target-descriptions.o): Update.
        (xml-tdesc.o): New rule.
        * xml-tdesc.c, xml-tdesc.h: New files.
        * remote.c (PACKET_qXfer_features): New enum.
        (remote_protocol_features): Add qXfer:features:read.
        (remote_xfer_partial): Handle TARGET_OBJECT_AVAILABLE_FEATURES.
        (_initialize_remote): Register qXfer:features:read.
        * target.h (enum target_object): Add TARGET_OBJECT_AVAILABLE_FEATURES.
        * features/gdb-target.dtd: New file.

2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>

        * copyright.sh: Clarify error.

2007-01-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * symtab.c (matching_bfd_sections): Fix VMA matching for
        prelinked objects.

2007-01-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * minsyms.c (lookup_minimal_symbol_by_pc_section): Handle
        nested symbols.

2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>

        Updated copyright notices for most files.

2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>

        * copyright.sh (prunes): Add step-line.inp and step-line.c.

2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>

        * configure.ac (DEBUGDIR_RELOCATABLE): Define for debugdir inside
        exec_prefix.
        (TARGET_SYSTEM_ROOT_RELOCATABLE): Allow for exec_prefix being
        '${prefix}'.
        * configure, config.in: Regenerate.
        * defs.h (debug_file_directory): Declare.
        * main.c (captured_main): Canonicalize gdb_sysroot.  Assume
        TARGET_SYSTEM_ROOT is defined.  Initialize debug_file_directory and
        relocate it if DEBUGDIR_RELOCATABLE.
        * symfile.c (debug_file_directory): Make non-static.
        (find_separate_debug_file): Look for debug info for SYSROOT/PATH
        in DEBUGDIR/PATH if DEBUGDIR is inside SYSROOT.
        (_initialize_symfile): Don't initialize debug_file_directory here.

2007-01-09  Jim Blandy  <jimb@codesourcery.com>

        * score-tdep.c (score_push_dummy_call): Don't mix declarations and
        statements.

2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>

        * alpha-mdebug-tdep.c (alpha_mdebug_frame_prev_register): Use
        frame_unwind_register to recurse.
        * alpha-tdep.c (alpha_sigtramp_frame_prev_register): Likewise.
        (alpha_heuristic_frame_prev_register): Likewise.
        * h8300-tdep.c (h8300_frame_prev_register): Likewise.
        * m32c-tdep.c (m32c_prev_register): Likewise.
        * frame.c (frame_register_unwind_location): Remove FIXME.

2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
            Eli Zaretskii  <eliz@gnu.org>

        * copyright.sh: New file.

2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>

        * configure.ac: Check for XML_StopParser.
        * xml-support.c (gdb_xml_body_text): Check for an error.
        (gdb_xml_start_element_wrapper): Conditionalize call to XML_StopParser.
        (gdb_xml_end_element_wrapper): Likewise.
        * config.in, configure: Regenerated.

2007-01-08  Daniel Jacobowitz  <dan@codesourcery.com>

        * varobj.c (install_new_value): Always update print_value.
        (value_get_print_value): Immediately return NULL for missing
        values.

2007-01-08  Jim Blandy  <jimb@codesourcery.com>

        * configure.ac: Tighten pattern for extracting value of
        DEPRECATED_TM_FILE from the target makefile fragment.
        * configure: Regenerated.

2007-01-08  Daniel Jacobowitz  <dan@codesourcery.com>

        * linux-nat.c (struct simple_pid_list): Add status.
        (add_to_pid_list): Record the PID's status.
        (linux_record_stopped_pid): Likewise.  Make static.
        (pull_pid_from_list): Return the saved status.
        (linux_nat_handle_extended): Deleted.
        (linux_handle_extended_wait): Combine with linux_nat_handle_extended.
        Make static.  Handle non-SIGSTOP for a new thread's first signal.
        (flush_callback): Handle unexpected pending signals.
        (linux_nat_wait): Update calls to changed functions.
        * linux-nat.h (linux_record_stopped_pid, linux_handle_extended_wait):
        Remove prototypes for newly static functions.

2007-01-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (value_from_register): New gdbarch function.
        * gdbarch.c, gdbarch.h: Regenerate.
        * findvar.c (default_value_from_register): New function.
        (value_from_register): Use gdbarch_value_from_register.
        * value.h (default_value_from_register): Declare.
        * spu-tdep.c (spu_convert_register_p, spu_register_to_value,
        spu_value_to_register): Remove.
        (spu_value_from_register): New function.
        (spu_gdbarch_init): Do not call set_gdbarch_convert_register_p,
        set_gdbarch_register_to_value, set_gdbarch_value_to_register.
        Call set_gdbarch_value_from_register.
        * s390-tdep.c (s390_convert_register_p, s390_register_to_value,
        s390_value_to_register): Remove.
        (s390_value_from_register): New function.
        (s390_gdbarch_init): Do not call set_gdbarch_convert_register_p,
        set_gdbarch_register_to_value, set_gdbarch_value_to_register.
        Call set_gdbarch_value_from_register.

2007-01-08  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Add "set sysroot" and "show sysroot".
        * solib.c (solib_absolute_prefix): Delete.  Replace
        all uses with gdb_sysroot.
        (_initialize_solib): Add "set sysroot" and "show sysroot".
        Make "solib-absolute-prefix" an alias to it.

2007-01-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * frame.c (get_frame_register_bytes): New function.
        (put_frame_register_bytes): Likewise.
        * frame.h (get_frame_register_bytes): Declare.
        (put_frame_register_bytes): Likewise.
        * findvar.c (value_from_register): Always construct lval_register
        values.  Use get_frame_register_bytes.
        * valops.c (value_assign): Use get_frame_register_bytes and
        put_frame_register_bytes.

2007-01-08  Jim Blandy  <jimb@codesourcery.com>

        * MAINTAINERS: Update Stan Shebs' email address.

2007-01-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (is_known_support_routine): Improve the implementation.

2007-01-06  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c: Add include of source.h.
        (is_known_support_routine): Improve the check verifying that the file
        associated to this frame exists.
        * Makefile.in (ada-lang.o): Add dependency on source.h.

2007-01-07  Jim Blandy  <jimb@codesourcery.com>

        * ax-general.c (ax_const_l): Select proper opcode for the given
        value.

2007-01-05  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c (c_value_of_root): Don't select frame if variable
        object is out of scope.

2007-01-05  Nick Roberts  <nickrob@snap.net.nz>

        * varobj.c (struct varobj): New member print_value.
        (install_new_value): Compare last printed value with current one
        instead of contents.
        (new_variable): Initialize var->print_value to NULL.
        (free_variable): Free var->print_value.
        (value_get_print_value): New function derived from
        c_value_of_variable.
        (c_value_of_variable): Use value_get_print_value.

2007-01-05  Joel Brobecker  <brobecker@adacore.com>

        * i386-tdep.c (i386_analyze_stack_align): Add comment.

2007-01-05  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Add entries for new catch commands.

2007-01-05  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (partial_die_info): Add field has_byte_size.
        (add_partial_symbol): Correct identification of external references.
        (process_structure_scope): Likewise.
        (read_partial_die): Handle DW_AT_byte_size attribute.

2007-01-05  Daniel Jacobowitz  <dan@codesourcery.com>

        * xml-support.c (gdb_xml_end_element): Remove wrong backslashes.

2007-01-05  Nick Roberts  <nickrob@snap.net.nz>

        * varobj.c (get_type_deref): Fix variable objects for references to
        pointers.

2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * symtab.c (find_pc_sect_psymtab): Add comments.  Handle psymtabs
        with no symbols.

2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * memory-map.c (struct_memory_map_parsing_data): Remove most
        members.  Make property_name an array.
        (free_memory_map_parsing_data, memory_map_start_element)
        (memory_map_end_element, memory_map_character_data): Delete.
        (memory_map_start_memory, memory_map_end_memory)
        (memory_map_start_property, memory_map_end_property): New functions.
        (property_attributes, memory_children, memory_type_enum)
        (memory_attributes, memory_map_children, memory_map_elements): New.
        (parse_memory_map): Rewrite.
        * xml-support.c (debug_xml): New.
        (xml_get_required_attribute, xml_get_integer_attribute)
        (xml_get_enum_value, free_xml_parser, make_cleanup_free_xml_parser):
        Delete.
        (struct scope_level, struct gdb_xml_parser, gdb_xml_body_text)
        (gdb_xml_debug, gdb_xml_error, gdb_xml_values_cleanup)
        (gdb_xml_start_element, gdb_xml_start_element_wrapper)
        (gdb_xml_end_element, gdb_xml_end_element_wrapper, gdb_xml_cleanup)
        (gdb_xml_create_parser_and_cleanup, gdb_xml_parse)
        (gdb_xml_parse_ulongest, gdb_xml_parse_attr_ulongest)
        (gdb_xml_parse_attr_enum, show_debug_xml, _initialize_xml_support):
        New.
        * xml-support.h (struct gdb_xml_value, gdb_xml_attribute_handler)
        (enum gdb_xml_attribute_flag, struct gdb_xml_attribute)
        (enum gdb_xml_element_flag, struct gdb_xml_element)
        (gdb_xml_element_start_handler, gdb_xml_element_end_handler)
        (struct gdb_xml_enum): New.
        (gdb_xml_create_parser_and_cleanup, gdb_xml_parse, gdb_xml_debug)
        (gdb_xml_error, gdb_xml_parse_attr_ulongest)
        (gdb_xml_parse_attr_enum, gdb_xml_parse_ulongest): New prototypes.
        (xml_get_required_attribute, xml_get_integer_attribute)
        (xml_get_enum_value, make_cleanup_free_xml_parser): Delete prototypes.
        * Makefile.in (xml_support_h, xml-support.o): Update.

2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (eval.o): Update dependencies.
        * eval.c: Include "ui-out.h" and "exceptions.h".
        (evaluate_subexp_standard): Use TRY_CATCH around value_of_variable.
        Use value_zero if an error occurs when avoiding side effects.
        * varobj.c (c_value_of_root): Initialize new_val.

2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * varobj.c (varobj_list_children): Stop if the number of children is
        unknown.
        (c_number_of_children):

2007-01-04  Mark Kettenis  <kettenis@gnu.org>

        * alpha-tdep.c (alpha_register_name): Use ARRAY_SIZE.
        (alpha_read_insn, alpha_skip_prologue, alpha_heuristic_proc_start)
        (alpha_heuristic_frame_unwind_cache, alpha_next_pc)
        (alpha_gdbarch_init): Use ALPHA_INSN_SIZE, ALPHA_REGISTER_SIZE and
        sizeof, instead of hardcoded constants.

2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * CONTRIBUTE: Use sourceware.org.

2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * buildsym.c (start_subfile): Handle producer.
        (record_producer): New function.
        * buildsym.h (struct subfile): Include producer.
        (record_producer): New prototype.
        * dwarf2-frame.c (struct dwarf2_cie): Add version and augmentation.
        (struct dwarf2_frame_state): Add armcc_cfa_offsets_sf and
        armcc_cfa_offsets_reversed.
        (execute_cfa_program): Handle armcc_cfa_offsets_sf.
        (dwarf2_frame_find_quirks): New function.
        (dwarf2_frame_cache): Call it.  Handle armcc_cfa_offsets_reversed.
        (decode_frame_entry_1): Record the CIE version.  Record the
        augmentation.  Skip armcc augmentations.
        * dwarf2read.c (read_file_scope): Save the producer.
        * symtab.h (struct symtab): Rename unused version member to
        producer.

2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * configure.ac (build_warnings): Use -Wall and
        -Wdeclaration-after-statement.
        * configure: Regenerated.

2007-01-04  Vladimir Prus  <vladimir@codesourcery.com>

        Simplify access to variours properties of child
        variable objects in C.
        * varobj.c (value_struct_element_index): New function.
        (c_describe_child): New function.
        (c_name_of_child, c_value_of_child)
        (c_type_of_child): Rewrite to use c_describe_child.

2007-01-04  Vladimir Prus  <vladimir@codesourcery.com>

        gdb/
        * varobj.c: Include "vec.h". 
        (varobj_p): New typedef, declare vector of those.
        (struct varobj): Use vector for the 'children' member.
        (child_exists): Remove.
        (save_child_in_parent): Remove.
        (remove_child_from_parent): Remove.
        (struct varobj_child): Remove.
        (struct vstack): Remove.
        (vpush, vpop): Remove.
        (varobj_list_children): Adjust to work work vector.
        (varobj_update): Likewise. Use vectors for
        working stack and result.
        (delete_variable_1): Likewise.
        * Makefile.in (varobj.o): Update dependencies.

2007-01-04  Vladimir Prus  <vladimir@codesourcery.com>

        Port from Apple's version.
        gdb/
        * varobj.c (type_changeable): Rename to...
        (varobj_value_is_changeable_p): ...this. Adjust all callers.
        (is_root_p): New function. Use it everywhere.

2007-01-04  Jim Blandy  <jimb@codesourcery.com>

        * glibc-tdep.c (glibc_skip_solib_resolver): Look for '_dl_fixup',
        then plain 'fixup'.

2007-01-04  Joel Brobecker  <brobecker@adacore.com>

        * hpread.c (hpread_start_psymtab): Remove unnecessary extern.

2007-01-04  Joel Brobecker  <brobecker@adacore.com>

        * hpread.c (hpread_type_lookup): Fix compilation failure.

2007-01-04  Qinwei  <qinwei@sunnorth.com.cn>

        * NEWS: New port to S+core.
        * MAINTAINERS (Write After Approval, Responsible Maintainers):
        Add myself.

        * Makefile.in: Add dependencies for S+core files.
        * configure.tgt (score*, score-*-*): Add S+core target.
        * config/score/embed.mt: New file.
        * score-tdep.c: New file.
        * score-tdep.h: New file.

2007-01-04  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp) [OP_TYPE]: Return a value with
        the appropriate type rather than a bogus void type.

2007-01-04  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.h (ada_find_printable_frame): Remove.
        (ada_exception_catchpoint_p, ada_decode_exception_location)
        (ada_decode_assert_location): Add declaration.
        * ada-lang.c: Add include of annotate.h and valprint.h.
        (exception_catchpoint_kind): New enum.
        (function_name_from_pc, is_known_support_routine)
        (ada_find_printable_frame, ada_unhandled_exception_name_addr)
        (ada_exception_name_addr_1, ada_exception_name_addr)
        (print_it_exception, print_one_exception, print_mention_exception)
        (print_it_catch_exception, print_one_catch_exception)
        (print_mention_catch_exception, catch_exception_breakpoint_ops)
        (print_it_catch_exception_unhandled)
        (print_one_catch_exception_unhandled)
        (print_mention_catch_exception_unhandled, print_it_catch_assert)
        (print_one_catch_assert, print_mention_catch_assert)
        (ada_exception_catchpoint_p, error_breakpoint_runtime_sym_not_found)
        (ada_get_next_arg, catch_ada_exception_command_split)
        (ada_exception_sym_name, ada_exception_sym_name)
        (ada_exception_breakption_ops, ada_exception_catchpoint_cond_string)
        (ada_parse_catchpoint_condition, ada_exception_sal)
        (ada_decode_exception_location)
        (ada_decode_assert_location): New function.
        (catch_exception_unhandled_breakpoint_ops): New global variable.
        (catch_assert_breakpoint_ops): New global variable.
        * breakpoint.c: Add include of ada-lang.h.
        (print_one_breakpoint): Do not print the condition for Ada
        exception catchpoints.
        (create_ada_exception_breakpoint): New function.
        (catch_ada_exception_command, catch_assert_command): New function.
        (catch_command_1): Add support for the new "catch exception" and
        "catch assert" commands.
        (_initialize_breakpoint): Add help description for the new catch
        commands.
        * Makefile.in (ada-lang.o): Add dependency on annotate.h and
        valprint.h.
        (breakpoint.o): Add dependency on ada-lang.h.

2007-01-03  Pedro Alves  <pedro_alves@portugalmail.pt>

        * coffread.c (cs_to_section): If bfd_section is found, always
        return its section index.
        (coff_symtab_read): Determine the minimal_symbol_type using the
        bfd_section flags.

2007-01-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (top.o): Update.
        * top.c (gdb_readline_wrapper_done, gdb_readline_wrapper_result)
        (saved_after_char_processing_hook, gdb_readline_wrapper_line)
        (struct gdb_readline_wrapper_cleanup, gdb_readline_wrapper_cleanup):
        New.
        (gdb_readline_wrapper): Rewrite to use asynchronous readline.

2007-01-03  Mark Kettenis  <kettenis@gnu.org>

        * arm-linux-tdep.c (arm_linux_extract_return_value): Remove.
        (arm_linux_init_abi): Don't set deprecated_extract_return_value.

2007-01-03  Daniel Jacobowitz  <dan@codesourcery.com>

        * ada-lang.c (find_struct_field): Initialize *byte_offset_p.
        * breakpoint.c (do_enable_breakpoint): Ignore both mem_cnt and i.
        * c-typeprint.c (c_type_print_varspec_suffix): Don't test length
        greater than or equal to zero.
        * m2-typeprint.c (m2_array): Likewise.
        * p-typeprint.c (pascal_type_print_varspec_prefix): Likewise.
        * gdbtypes.c (copy_type_recursive): Correct == typo.
        * i386-tdep.c (i386_skip_prologue): Remove stray semicolon.
        * linux-nat.c (linux_nat_info_proc_cmd): Don't compare a pointer
        greater than zero.
        * macroscope.c (sal_macro_scope): Don't name a local variable "main".
        (default_macro_scope): Remove unused variable.
        * prologue-value.h (pv_area_find_reg): Don't name an argument
        "register".
        * remote-fileio.c (remote_fio_func_map): Add missing braces.
        * remote.c (sigint_remote_twice_token, sigint_remote_token): Change
        type.
        (cleanup_sigint_signal_handler): Remove casts.
        * valprint.c (val_print): Use a volatile local for the modified
        argument.
        * varobj.c (languages): Remove extra array dimension.
        (varobj_create): Correct access to languages array.
        * mi/mi-cmd-break.c (mi_cmd_break_insert, mi_cmd_break_watch): Add
        missing braces.
        * mi/mi-cmd-disas.c (mi_cmd_disassemble): Likewise.
        * mi/mi-cmd-env.c (mi_cmd_env_path, mi_cmd_env_dir): Likewise.
        * mi/mi-getopt.c (mi_valid_noargs): Likewise.
        * mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
        (mi_cmd_data_write_memory): Likewise.
        * signals/signals.c (target_signal_to_string): Cast to int before
        comparing.
        * tui/tui-layout.c (init_and_make_win): Take and return a void *.
        Update all callers.

2007-01-03  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Mention pointer to member improvements.
        * Makefile.in (gnu-v3-abi.o): Delete special rule.
        (eval.o, gnu-v3-abi.o, ia64-tdep.o): Update.
        * ada-valprint.c (ada_print_scalar): Update for new type codes.
        * c-typeprint.c (c_print_type): Update for new type codes.
        (c_type_print_varspec_prefix, c_type_print_varspec_suffix)
        (c_type_print_base): Likewise.
        (c_type_print_args): Rewrite.
        * c-valprint.c (c_val_print): Update for new type codes.  Remove
        support for references to members.  Treat methods like functions.
        * cp-abi.c (cplus_print_method_ptr, cplus_method_ptr_size)
        (cplus_make_method_ptr, cplus_method_ptr_to_value): New.
        * cp-abi.h (cplus_print_method_ptr, cplus_method_ptr_size)
        (cplus_make_method_ptr, cplus_method_ptr_to_value): New prototypes.
        (struct cp_abi_ops): Add corresponding members.
        * cp-valprint.c (cp_print_class_method): Delete.
        (cp_find_class_member): New function.
        (cp_print_class_member): Use it.  Simplify support for bogus
        member pointers.
        * dwarf2read.c (quirk_gcc_member_function_pointer): Use
        lookup_methodptr_type.
        (read_tag_ptr_to_member_type): Likewise, and lookup_memberptr_type.
        * eval.c (evaluate_subexp_standard): Implement EVAL_SKIP for
        OP_SCOPE.  Update call to value_aggregate_elt.  Rewrite member
        pointer support.
        (evaluate_subexp_for_address): Handle OP_SCOPE explicitly.  Handle
        references returned by user defined operators.
        * f-typeprint.c (f_print_type, f_type_print_varspec_prefix)
        (f_type_print_varspec_suffix): Remove support for member pointers.
        * gdbtypes.c (lookup_memberptr_type): Renamed from lookup_member_type
        and adjusted.
        (smash_to_memberptr_type): Likewise, from smash_to_member_type.
        (lookup_methodptr_type): New.
        (rank_one_type): Adjust for TYPE_CODE_MEMBERPTR.
        (recursive_dump_type): Update for new types.
        * gdbtypes.h (enum type_code): Replace TYPE_CODE_MEMBER with
        TYPE_CODE_MEMBERPTR and TYPE_CODE_METHODPTR.
        (lookup_memberptr_type, lookup_methodptr_type)
        (smash_to_memberptr_type): New prototypes.
        (smash_to_method_type): Formatting fix.
        (lookup_member_type, smash_to_member_type): Delete prototypes.
        * gnu-v3-abi.c (gnuv3_get_vtable, gnuv3_get_virtual_fn): New.
        Do not rely on debug information for the vptr or the method's
        enclosing type.  Handle function descriptors for IA64.
        (gnuv3_virtual_fn_field): Rewrite using the new functions.
        (gnuv3_find_method_in, gnuv3_print_method_ptr)
        (gnuv3_method_ptr_size, gnuv3_make_method_ptr)
        (gnuv3_method_ptr_to_value): New.
        (init_gnuv3_ops): Set new members of gnu_v3_abi_ops.
        * hpread.c (hpread_type_lookup): Update for new types.
        * infcall.c (value_arg_coerce): Likewise.
        * m2-typeprint.c (m2_print_type): Remove explicit support
        for member pointers.
        * m2-valprint.c (m2_val_print): Likewise.
        * p-typeprint.c (pascal_type_print_varspec_prefix)
        (pascal_type_print_varspec_suffix, pascal_type_print_base): Likewise.
        * p-valprint.c (pascal_val_print): Likewise.
        (pascal_object_print_class_method, pascal_object_print_class_member):
        Delete.
        * p-lang.h (pascal_object_print_class_method)
        (pascal_object_print_class_member): Delete prototypes.
        * stabsread.c (read_type): Update for new types.
        * typeprint.c (print_type_scalar): Likewise.
        * valops.c (value_struct_elt_for_reference, value_namespace_elt)
        (value_maybe_namespace_elt, value_aggregate_elt): Add want_address
        argument.  Construct a pointer to member if the address of a
        function or data member is requested.
        (value_cast_pointers): Don't modify the input value.
        (value_cast): Adjust pointer to member handling for new types.
        Allow null pointer to member constants.  Don't modify the input
        value.
        (value_ind): Remove pointer to member check.  Handle function
        descriptors for function pointers.
        (value_struct_elt, value_find_oload_method_list, check_field):
        Remove pointer to member checks.
        * value.c (unpack_long): Allow pointers to data members.
        (value_from_longest): Allow member pointers.
        * value.h (value_aggregate_elt): Add want_address.
        * varobj.c (c_variable_editable): Remove check for members.
        * gdbarch.sh: Add vtable_function_descriptors and vbit_in_delta.
        * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Handle descriptors
        in virtual tables.
        (ia64_gdbarch_init): Call set_gdbarch_vtable_function_descriptors.
        * c-lang.h (cp_print_class_method): Delete prototype.
        * arm-tdep.c (arm_gdbarch_init): Call set_gdbarch_vbit_in_delta.
        * mips-tdep.c (mips_gdbarch_init): Likewise.
        * gdbarch.c, gdbarch.h: Regenerated.

2007-01-01  Mark Kettenis  <kettenis@gnu.org>

        * rs6000-tdep.c (rs6000_use_struct_convention)
        (rs6000_extract_return_value, rs6000_store_return_value)
        (rs6000_extract_struct_value_address): Remove.
        (rs6000_return_value): New function.
        (rs6000_gdbarch_init): Don't set deprecated_extract_return_value,
        store_return_value, deprecated_extract_struct_value_address and
        deprecated_use_struct_convention.  Use rs6000_return_value
        instead.

2007-01-02  Nick Roberts  <nickrob@snap.net.nz>

        * mi/mi-cmds.c (mi_cmds): Remove entries for -display-delete,
        -display-disable, -display-enable, -display-insert and
        -display-list.

2007-01-01  Joel Brobecker  <brobecker@adacore.com>

        * breakpoint.c (remove_breakpoint): Remove dead code.

2007-01-01  Nick Roberts  <nickrob@snap.net.nz>

        * varobj.c: Include block.h.
        (c_value_of_root): Check scope within nested statements.

2007-01-01  Mark Kettenis  <kettenis@gnu.org>

        * mi/mi-main.c (mi_cmd_data_write_register_values): Use
        regcache_cooked_write_signed instead of
        deprecated_write_register_bytes.

2007-01-01  Joel Brobecker  <brobecker@adacore.com>

        * config/djgpp/fnchange.lst: Add entry for ChangeLog-2006.

2007-01-01  Joel Brobecker  <brobecker@adacore.com>

        Followed the Start of New Year Procedure:
        * ChangeLog-2006: New file, containing all the entries for 2006.
        * ChangeLog: Removed all 2006 entries, and changed the reference
        to the previous ChangeLog to point to ChangeLog 2006.
        * top.c (print_gdb_version): Update copyright year.

2007-01-01  Mark Kettenis  <kettenis@gnu.org>

        * Makefile.in (remote-sds.o): Remove.
        * remote-sds.c: Delete.

For older changes see ChangeLog-2006.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End:

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.