URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [gdb/] [gdbserver/] [linux-crisv32-low.c] - Rev 411
Go to most recent revision | Compare with Previous | Blame | View Log
/* GNU/Linux/CRIS specific low level interface, for the remote server for GDB. Copyright (C) 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007, 2008 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "server.h" #include "linux-low.h" #include <sys/ptrace.h> /* CRISv32 */ #define cris_num_regs 49 /* Note: Ignoring USP (having the stack pointer in two locations causes trouble without any significant gain). */ /* Locations need to match <include/asm/arch/ptrace.h>. */ static int cris_regmap[] = { 1*4, 2*4, 3*4, 4*4, 5*4, 6*4, 7*4, 8*4, 9*4, 10*4, 11*4, 12*4, 13*4, 14*4, 24*4, 15*4, -1, -1, -1, 16*4, -1, 22*4, 23*4, 17*4, -1, -1, 21*4, 20*4, -1, 19*4, -1, 18*4, 25*4, 26*4, -1, -1, 29*4, 30*4, 31*4, 32*4, 33*4, 34*4, 35*4, 36*4, 37*4, 38*4, 39*4, 40*4, -1 }; extern int debug_threads; static CORE_ADDR cris_get_pc (void) { unsigned long pc; collect_register_by_name ("pc", &pc); if (debug_threads) fprintf (stderr, "stop pc is %08lx\n", pc); return pc; } static void cris_set_pc (CORE_ADDR pc) { unsigned long newpc = pc; supply_register_by_name ("pc", &newpc); } static const unsigned short cris_breakpoint = 0xe938; #define cris_breakpoint_len 2 static int cris_breakpoint_at (CORE_ADDR where) { unsigned short insn; (*the_target->read_memory) (where, (unsigned char *) &insn, cris_breakpoint_len); if (insn == cris_breakpoint) return 1; /* If necessary, recognize more trap instructions here. GDB only uses the one. */ return 0; } /* We only place breakpoints in empty marker functions, and thread locking is outside of the function. So rather than importing software single-step, we can just run until exit. */ /* FIXME: This function should not be needed, since we have PTRACE_SINGLESTEP for CRISv32. Without it, td_ta_event_getmsg in thread_db_create_event will fail when debugging multi-threaded applications. */ static CORE_ADDR cris_reinsert_addr (void) { unsigned long pc; collect_register_by_name ("srp", &pc); return pc; } static void cris_write_data_breakpoint (int bp, unsigned long start, unsigned long end) { switch (bp) { case 0: supply_register_by_name ("s3", &start); supply_register_by_name ("s4", &end); break; case 1: supply_register_by_name ("s5", &start); supply_register_by_name ("s6", &end); break; case 2: supply_register_by_name ("s7", &start); supply_register_by_name ("s8", &end); break; case 3: supply_register_by_name ("s9", &start); supply_register_by_name ("s10", &end); break; case 4: supply_register_by_name ("s11", &start); supply_register_by_name ("s12", &end); break; case 5: supply_register_by_name ("s13", &start); supply_register_by_name ("s14", &end); break; } } static int cris_insert_watchpoint (char type, CORE_ADDR addr, int len) { int bp; unsigned long bp_ctrl; unsigned long start, end; unsigned long ccs; /* Breakpoint/watchpoint types (GDB terminology): 0 = memory breakpoint for instructions (not supported; done via memory write instead) 1 = hardware breakpoint for instructions (not supported) 2 = write watchpoint (supported) 3 = read watchpoint (supported) 4 = access watchpoint (supported). */ if (type < '2' || type > '4') { /* Unsupported. */ return 1; } /* Read watchpoints are set as access watchpoints, because of GDB's inability to deal with pure read watchpoints. */ if (type == '3') type = '4'; /* Get the configuration register. */ collect_register_by_name ("s0", &bp_ctrl); /* The watchpoint allocation scheme is the simplest possible. For example, if a region is watched for read and a write watch is requested, a new watchpoint will be used. Also, if a watch for a region that is already covered by one or more existing watchpoints, a new watchpoint will be used. */ /* First, find a free data watchpoint. */ for (bp = 0; bp < 6; bp++) { /* Each data watchpoint's control registers occupy 2 bits (hence the 3), starting at bit 2 for D0 (hence the 2) with 4 bits between for each watchpoint (yes, the 4). */ if (!(bp_ctrl & (0x3 << (2 + (bp * 4))))) break; } if (bp > 5) { /* We're out of watchpoints. */ return -1; } /* Configure the control register first. */ if (type == '3' || type == '4') { /* Trigger on read. */ bp_ctrl |= (1 << (2 + bp * 4)); } if (type == '2' || type == '4') { /* Trigger on write. */ bp_ctrl |= (2 << (2 + bp * 4)); } /* Setup the configuration register. */ supply_register_by_name ("s0", &bp_ctrl); /* Setup the range. */ start = addr; end = addr + len - 1; /* Configure the watchpoint register. */ cris_write_data_breakpoint (bp, start, end); collect_register_by_name ("ccs", &ccs); /* Set the S1 flag to enable watchpoints. */ ccs |= (1 << 19); supply_register_by_name ("ccs", &ccs); return 0; } static int cris_remove_watchpoint (char type, CORE_ADDR addr, int len) { int bp; unsigned long bp_ctrl; unsigned long start, end; /* Breakpoint/watchpoint types: 0 = memory breakpoint for instructions (not supported; done via memory write instead) 1 = hardware breakpoint for instructions (not supported) 2 = write watchpoint (supported) 3 = read watchpoint (supported) 4 = access watchpoint (supported). */ if (type < '2' || type > '4') return -1; /* Read watchpoints are set as access watchpoints, because of GDB's inability to deal with pure read watchpoints. */ if (type == '3') type = '4'; /* Get the configuration register. */ collect_register_by_name ("s0", &bp_ctrl); /* Try to find a watchpoint that is configured for the specified range, then check that read/write also matches. */ /* Ugly pointer arithmetic, since I cannot rely on a single switch (addr) as there may be several watchpoints with the same start address for example. */ unsigned long bp_d_regs[12]; /* Get all range registers to simplify search. */ collect_register_by_name ("s3", &bp_d_regs[0]); collect_register_by_name ("s4", &bp_d_regs[1]); collect_register_by_name ("s5", &bp_d_regs[2]); collect_register_by_name ("s6", &bp_d_regs[3]); collect_register_by_name ("s7", &bp_d_regs[4]); collect_register_by_name ("s8", &bp_d_regs[5]); collect_register_by_name ("s9", &bp_d_regs[6]); collect_register_by_name ("s10", &bp_d_regs[7]); collect_register_by_name ("s11", &bp_d_regs[8]); collect_register_by_name ("s12", &bp_d_regs[9]); collect_register_by_name ("s13", &bp_d_regs[10]); collect_register_by_name ("s14", &bp_d_regs[11]); for (bp = 0; bp < 6; bp++) { if (bp_d_regs[bp * 2] == addr && bp_d_regs[bp * 2 + 1] == (addr + len - 1)) { /* Matching range. */ int bitpos = 2 + bp * 4; int rw_bits; /* Read/write bits for this BP. */ rw_bits = (bp_ctrl & (0x3 << bitpos)) >> bitpos; if ((type == '3' && rw_bits == 0x1) || (type == '2' && rw_bits == 0x2) || (type == '4' && rw_bits == 0x3)) { /* Read/write matched. */ break; } } } if (bp > 5) { /* No watchpoint matched. */ return -1; } /* Found a matching watchpoint. Now, deconfigure it by both disabling read/write in bp_ctrl and zeroing its start/end addresses. */ bp_ctrl &= ~(3 << (2 + (bp * 4))); /* Setup the configuration register. */ supply_register_by_name ("s0", &bp_ctrl); start = end = 0; /* Configure the watchpoint register. */ cris_write_data_breakpoint (bp, start, end); /* Note that we don't clear the S1 flag here. It's done when continuing. */ return 0; } static int cris_stopped_by_watchpoint (void) { unsigned long exs; collect_register_by_name ("exs", &exs); return (((exs & 0xff00) >> 8) == 0xc); } static CORE_ADDR cris_stopped_data_address (void) { unsigned long eda; collect_register_by_name ("eda", &eda); /* FIXME: Possibly adjust to match watched range. */ return eda; } static void cris_fill_gregset (void *buf) { int i; for (i = 0; i < cris_num_regs; i++) { if (cris_regmap[i] != -1) collect_register (i, ((char *) buf) + cris_regmap[i]); } } static void cris_store_gregset (const void *buf) { int i; for (i = 0; i < cris_num_regs; i++) { if (cris_regmap[i] != -1) supply_register (i, ((char *) buf) + cris_regmap[i]); } } typedef unsigned long elf_gregset_t[cris_num_regs]; struct regset_info target_regsets[] = { { PTRACE_GETREGS, PTRACE_SETREGS, sizeof (elf_gregset_t), GENERAL_REGS, cris_fill_gregset, cris_store_gregset }, { 0, 0, -1, -1, NULL, NULL } }; struct linux_target_ops the_low_target = { -1, NULL, NULL, NULL, cris_get_pc, cris_set_pc, (const unsigned char *) &cris_breakpoint, cris_breakpoint_len, cris_reinsert_addr, 0, cris_breakpoint_at, cris_insert_watchpoint, cris_remove_watchpoint, cris_stopped_by_watchpoint, cris_stopped_data_address, };
Go to most recent revision | Compare with Previous | Blame | View Log