URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [gdb/] [testsuite/] [gdb.base/] [foll-vfork.exp] - Rev 24
Go to most recent revision | Compare with Previous | Blame | View Log
# Copyright 1997, 1999, 2007, 2008 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
if { [is_remote target] || ![isnative] } then {
continue
}
set prms_id 0
set bug_id 0
# NOTE drow/2002-12-06: I don't know what the referenced kernel problem
# is, but it appears to be fixed in recent HP/UX versions.
##if [istarget "hppa2.0w-hp-hpux*"] {
## warning "Don't run gdb.base/foll-vfork.exp until JAGaa43495 kernel problem is fixed."
## return 0
##}
global srcfile
set testfile "foll-vfork"
set testfile2 "vforked-prog"
set srcfile ${testfile}.c
set srcfile2 ${testfile2}.c
set binfile ${objdir}/${subdir}/${testfile}
set binfile2 ${objdir}/${subdir}/${testfile2}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
untested foll-vfork.exp
return -1
}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug}] != "" } {
untested foll-vfork.exp
return -1
}
# Until "set follow-fork-mode" and "catch vfork" are implemented on
# other targets...
#
if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {
continue
}
# Test to see if we are on an HP-UX 10.20 and if so,
# do not run these tests as catching vfork is disabled for
# 10.20.
if [istarget "hppa*-hp-hpux10.20"] then {
return 0
}
# A few of these tests require a little more time than the standard
# timeout allows.
set oldtimeout $timeout
set timeout [expr "$timeout + 10"]
proc check_vfork_catchpoints {} {
global gdb_prompt
global has_vfork_catchpoints
# Verify that the system supports "catch vfork".
gdb_test "catch vfork" "Catchpoint \[0-9\]* \\(vfork\\)" "insert first vfork catchpoint"
set has_vfork_catchpoints 0
gdb_test_multiple "continue" "continue to first vfork catchpoint" {
-re ".*Your system does not support vfork catchpoints.*$gdb_prompt $" {
unsupported "continue to first vfork catchpoint"
}
-re ".*Catchpoint.*$gdb_prompt $" {
set has_vfork_catchpoints 1
pass "continue to first vfork catchpoint"
}
}
if {$has_vfork_catchpoints == 0} {
unsupported "vfork catchpoints"
return -code return
}
}
proc vfork_parent_follow_through_step {} {
global gdb_prompt
send_gdb "set follow parent\n"
gdb_expect {
-re "$gdb_prompt $" {pass "set follow parent, vfork through step"}
timeout {fail "set follow parent, vfork through step"}
}
send_gdb "next\n"
gdb_expect {
-re "Detaching after fork from.*13.*$gdb_prompt "\
{pass "vfork parent follow, through step"}
-re "$gdb_prompt $" {fail "vfork parent follow, through step"}
timeout {fail "(timeout) vfork parent follow, through step" }
}
# The child has been detached; allow time for any output it might
# generate to arrive, so that output doesn't get confused with
# any gdb_expected debugger output from a subsequent testpoint.
#
exec sleep 1
}
proc vfork_parent_follow_to_bp {} {
global gdb_prompt
global srcfile
send_gdb "set follow parent\n"
gdb_expect {
-re "$gdb_prompt $" {pass "set follow parent, vfork to bp"}
timeout {fail "set follow parent, vfork to bp"}
}
send_gdb "break ${srcfile}:18\n"
gdb_expect {
-re "$gdb_prompt $" {pass "break, vfork to bp"}
timeout {fail "break, vfork to bp"}
}
send_gdb "continue\n"
gdb_expect {
-re ".*Detaching after fork from child process.*Breakpoint.*18.*$gdb_prompt "\
{pass "vfork parent follow, to bp"}
-re "$gdb_prompt $" {fail "vfork parent follow, to bp"}
timeout {fail "(timeout) vfork parent follow, to bp" }
}
# The child has been detached; allow time for any output it might
# generate to arrive, so that output doesn't get confused with
# any expected debugger output from a subsequent testpoint.
#
exec sleep 1
}
proc vfork_and_exec_child_follow_to_main_bp {} {
global gdb_prompt
global binfile
send_gdb "set follow child\n"
gdb_expect {
-re "$gdb_prompt $" {pass "set follow child, vfork and exec to main bp"}
timeout {fail "set follow child, vfork and exec to main bp"}
}
send_gdb "continue\n"
gdb_expect {
-re "Attaching after fork to.*Executing new program.*Breakpoint.*vforked-prog.c:9.*$gdb_prompt "\
{pass "vfork and exec child follow, to main bp"}
-re "$gdb_prompt $" {fail "vfork and exec child follow, to main bp"}
timeout {fail "(timeout) vfork and exec child follow, to main bp" }
}
# The parent has been detached; allow time for any output it might
# generate to arrive, so that output doesn't get confused with
# any gdb_expected debugger output from a subsequent testpoint.
#
exec sleep 1
# Explicitly kill this child, or a subsequent rerun actually runs
# the exec'd child, not the original program...
send_gdb "kill\n"
gdb_expect {
-re ".*Kill the program being debugged.*y or n. $" {
send_gdb "y\n"
send_gdb "file $binfile\n"
gdb_expect {
-re ".*Load new symbol table from.*y or n. $" {
send_gdb "y\n"
gdb_expect {
-re "Reading symbols from.*$gdb_prompt $" {}
timeout { fail "loading symbols (timeout)"; return }
}
}
-re ".*gdb_prompt $" {}
timeout { fail "loading symbols (timeout)"; return }
}
}
-re ".*$gdb_prompt $" {}
timeout { fail "killing inferior (timeout)" ; return }
}
}
proc vfork_and_exec_child_follow_through_step {} {
global gdb_prompt
global binfile
# This test cannot be performed prior to HP-UX 10.30, because ptrace-based
# debugging of a vforking program basically doesn't allow the child to do
# things like hit a breakpoint between a vfork and exec. This means that
# saying "set follow child; next" at a vfork() call won't work, because
# the implementation of "next" sets a "step resume" breakpoint at the
# return from the vfork(), which the child will hit on its way to exec'ing.
#
if { ![istarget "hppa*-*-hpux11.*"] } {
verbose "vfork child-following next test ignored for non-hppa or pre-HP/UX-10.30 targets."
return 0
}
send_gdb "set follow child\n"
gdb_expect {
-re "$gdb_prompt $" {pass "set follow child, vfork and exec through step"}
timeout {fail "set follow child, vfork and exec through step"}
}
send_gdb "next\n"
gdb_expect {
-re "Attaching after fork to.*Executing new program.*Breakpoint.*vforked-prog.c:9.*$gdb_prompt "\
{pass "vfork and exec child follow, through step"}
-re "$gdb_prompt $" {fail "vfork and exec child follow, through step"}
timeout {fail "(timeout) vfork and exec child follow, through step" }
}
# The parent has been detached; allow time for any output it might
# generate to arrive, so that output doesn't get confused with
# any expected debugger output from a subsequent testpoint.
#
exec sleep 1
# Explicitly kill this child, or a subsequent rerun actually runs
# the exec'd child, not the original program...
send_gdb "kill\n"
gdb_expect {
-re ".*Kill the program being debugged.*y or n. $" {
send_gdb "y\n"
send_gdb "file $binfile\n"
gdb_expect {
-re ".*Load new symbol table from.*y or n. $" {
send_gdb "y\n"
gdb_expect {
-re "Reading symbols from.*$gdb_prompt $" {}
timeout { fail "loading symbols (timeout)"; return }
}
}
-re ".*gdb_prompt $" {}
timeout { fail "loading symbols (timeout)"; return }
}
}
-re ".*$gdb_prompt $" {}
timeout { fail "killing inferior (timeout)" ; return }
}
}
proc tcatch_vfork_then_parent_follow {} {
global gdb_prompt
global srcfile
send_gdb "set follow parent\n"
gdb_expect {
-re "$gdb_prompt $" {pass "set follow parent, tcatch vfork"}
timeout {fail "set follow parent, tcatch vfork"}
}
send_gdb "tcatch vfork\n"
gdb_expect {
-re "Catchpoint .*(vfork).*$gdb_prompt $"\
{pass "vfork parent follow, set tcatch vfork"}
-re "$gdb_prompt $" {fail "vfork parent follow, set tcatch vfork"}
timeout {fail "(timeout) vfork parent follow, set tcatch vfork"}
}
send_gdb "continue\n"
# HP-UX 10.20 seems to stop you in "vfork", while more recent HP-UXs
# stop you in "_vfork".
gdb_expect {
-re "0x\[0-9a-fA-F\]*.*vfork.*$gdb_prompt "\
{pass "vfork parent follow, tcatch vfork"}
-re "vfork \\(\\) at.*$gdb_prompt "\
{pass "vfork parent follow, tcatch vfork"}
-re "$gdb_prompt $" {fail "vfork parent follow, tcatch vfork"}
timeout {fail "(timeout) vfork parent follow, tcatch vfork"}
}
send_gdb "finish\n"
gdb_expect {
-re "Run till exit from.*vfork.*0x\[0-9a-fA-F\]* in main .* at .*${srcfile}:12.*$gdb_prompt "\
{pass "vfork parent follow, finish after tcatch vfork"}
-re "$gdb_prompt $" {fail "vfork parent follow, finish after tcatch vfork"}
timeout {fail "(timeout) vfork parent follow, finish after tcatch vfork" }
}
# The child has been detached; allow time for any output it might
# generate to arrive, so that output doesn't get confused with
# any expected debugger output from a subsequent testpoint.
#
exec sleep 1
}
proc tcatch_vfork_then_child_follow {} {
global gdb_prompt
global srcfile
global srcfile2
send_gdb "set follow child\n"
gdb_expect {
-re "$gdb_prompt $" {pass "set follow child, tcatch vfork"}
timeout {fail "set follow child, tcatch vfork"}
}
send_gdb "tcatch vfork\n"
gdb_expect {
-re "Catchpoint .*(vfork).*$gdb_prompt $"\
{pass "vfork child follow, set tcatch vfork"}
-re "$gdb_prompt $" {fail "vfork child follow, set tcatch vfork"}
timeout {fail "(timeout) vfork child follow, set tcatch vfork"}
}
send_gdb "continue\n"
# HP-UX 10.20 seems to stop you in "vfork", while more recent HP-UXs
# stop you in "_vfork".
gdb_expect {
-re "vfork \\(\\) at .*$gdb_prompt $"\
{pass "vfork child follow, tcatch vfork"}
-re "0x\[0-9a-fA-F\]*.*vfork.*$gdb_prompt "\
{pass "vfork child follow, tcatch vfork"}
-re "0x\[0-9a-fA-F\]*.*_vfork.*$gdb_prompt "\
{pass "vfork child follow, tcatch vfork"}
-re "$gdb_prompt $" {fail "vfork child follow, tcatch vfork"}
timeout {fail "(timeout) vfork child follow, tcatch vfork"}
}
send_gdb "finish\n"
gdb_expect {
-re "Run till exit from.*vfork.*${srcfile}:12.*$gdb_prompt "\
{pass "vfork child follow, finish after tcatch vfork"}
-re "Run till exit from.*vfork.*${srcfile2}:9.*$gdb_prompt "\
{pass "vfork child follow, finish after tcatch vfork (followed exec)"}
-re "$gdb_prompt $" {fail "vfork child follow, finish after tcatch vfork"}
timeout {fail "(timeout) vfork child follow, finish after tcatch vfork" }
}
# The parent has been detached; allow time for any output it might
# generate to arrive, so that output doesn't get confused with
# any expected debugger output from a subsequent testpoint.
#
exec sleep 1
}
proc do_vfork_and_exec_tests {} {
global gdb_prompt
# Check that vfork catchpoints are supported, as an indicator for whether
# vfork-following is supported.
if [runto_main] then { check_vfork_catchpoints }
# Try following the parent process by stepping through a call to
# vfork. Do this without catchpoints.
if [runto_main] then { vfork_parent_follow_through_step }
# Try following the parent process by setting a breakpoint on the
# other side of a vfork, and running to that point. Do this
# without catchpoints.
if [runto_main] then { vfork_parent_follow_to_bp }
# Try following the child process by just continuing through the
# vfork, and letting the parent's breakpoint on "main" be auto-
# magically reset in the child.
#
if [runto_main] then { vfork_and_exec_child_follow_to_main_bp }
# Try following the child process by stepping through a call to
# vfork. The child also executes an exec. Since the child cannot
# be debugged until after it has exec'd, and since there's a bp on
# "main" in the parent, and since the bp's for the parent are
# recomputed in the exec'd child, the step through a vfork should
# land us in the "main" for the exec'd child, too.
#
if [runto_main] then { vfork_and_exec_child_follow_through_step }
# Try catching a vfork, and stepping out to the parent.
#
if [runto_main] then { tcatch_vfork_then_parent_follow }
# Try catching a vfork, and stepping out to the child.
#
if [runto_main] then { tcatch_vfork_then_child_follow }
# Test the ability to follow both child and parent of a vfork. Do
# this without catchpoints.
# ??rehrauer: NYI. Will add testpoints here when implemented.
#
# Test the ability to have the debugger ask the user at vfork-time
# whether to follow the parent, child or both. Do this without
# catchpoints.
# ??rehrauer: NYI. Will add testpoints here when implemented.
#
}
# Start with a fresh gdb
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
# The "Detaching..." and "Attaching..." messages may be hidden by
# default.
gdb_test "set verbose" ""
# This is a test of gdb's ability to follow the parent or child
# of a Unix vfork() system call. (The child will subsequently
# call a variant of a Unix exec() system call.)
#
do_vfork_and_exec_tests
set timeout $oldtimeout
return 0
Go to most recent revision | Compare with Previous | Blame | View Log