URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [gdb/] [testsuite/] [gdb.base/] [macscp.exp] - Rev 158
Go to most recent revision | Compare with Previous | Blame | View Log
# Test macro scoping.
# Copyright 2002, 2007, 2008 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
if $tracelevel then {
strace $tracelevel
}
set prms_id 0
set bug_id 0
set testfile "macscp"
set binfile ${objdir}/${subdir}/${testfile}
if {[gdb_compile "${srcdir}/${subdir}/macscp1.c" "${binfile}" executable {debug}] != "" } {
untested macscp.exp
return -1
}
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
# Ask GDB to show the current definition of MACRO, and return a list
# describing the result.
#
# The return value has the form {FILE1 FILE2 ... DEF}, which means
# that MACRO has the definition `DEF', and was defined in `FILE1',
# which was included from `FILE2', included from ... .
#
# If GDB says that MACRO has no definition, return the string `undefined'.
#
# If GDB complains that it doesn't have any information about
# preprocessor macro definitions, return the string `no-macro-info'.
#
# If expect times out waiting for GDB, we return the string `timeout'.
#
# If GDB's output doesn't otherwise match what we're expecting, we
# return the empty string.
proc info_macro {macro} {
global gdb_prompt
global decimal
set filepat {macscp[0-9]+\.[ch]}
set definition {}
set location {}
send_gdb "info macro ${macro}\n"
set debug_me 0
if {$debug_me} {exp_internal 1}
gdb_expect {
-re "Defined at \[^\r\n\]*(${filepat}):${decimal}\[\r\n\]" {
# `location' and `definition' should be empty when we see
# this message.
if {[llength $location] == 0 && [llength $definition] == 0} {
set location $expect_out(1,string)
exp_continue
} else {
# Exit this expect loop, with a result indicating failure.
set definition {}
}
}
-re "The symbol `${macro}' has no definition as a C/C\\+\\+ preprocessor macro\[^\r\n\]*\[\r\n\]" {
# `location' and `definition' should be empty when we see
# this message.
if {[llength $location] == 0 && [llength $definition] == 0} {
set definition undefined
exp_continue
} else {
# Exit this expect loop, with a result indicating failure.
set definition {}
}
}
-re "^\[\r\n\]* included at \[^\r\n\]*(${filepat}):${decimal}\[\r\n\]" {
# `location' should *not* be empty when we see this
# message. It should have recorded at least the initial
# `Defined at ' message (for definitions) or ` at' message
# (for undefined symbols).
if {[llength $location] != 0} {
lappend location $expect_out(1,string)
exp_continue
} else {
# Exit this expect loop, with a result indicating failure.
set definition {}
}
}
-re "^\[\r\n\]*at \[^\r\n\]*(${filepat}):${decimal}\[\r\n\]" {
# This appears after a `has no definition' message.
# `location' should be empty when we see it.
if {[string compare $definition undefined] == 0 \
&& [llength $location] == 0} {
set location $expect_out(1,string)
exp_continue
} else {
# Exit this expect loop, with a result indicating failure.
set definition {}
}
}
-re "#define ${macro} (\[^\r\n\]*)\[\r\n\]" {
# `definition' should be empty when we see this message.
if {[string compare $definition ""] == 0} {
set definition $expect_out(1,string)
exp_continue
} else {
# Exit this expect loop, with a result indicating failure.
set definition {}
}
}
-re "has no preprocessor macro information.*$gdb_prompt $" {
set definition no-macro-info
}
-re "$gdb_prompt $" {
# Exit the expect loop; let the existing value of `definition'
# indicate failure or success.
}
timeout {
set definition timeout
}
}
if {$debug_me} {exp_internal 0}
switch -exact -- $definition {
no-macro-info { return no-macro-info }
timeout { return timeout }
undefined -
default {
if {[llength $location] >= 1} {
return [concat $location [list $definition]]
} else {
return {}
}
}
}
}
# Call info_macro to show the definition of MACRO. Expect a result of
# EXPECTED. Use WHERE in pass/fail messages to identify the context.
# Return non-zero if we should abort the entire test file, or zero if
# we can continue.
proc check_macro {macro expected where} {
set func_def [info_macro $macro]
if {[string compare $func_def $expected] == 0} {
pass "info macro $macro $where"
} else {
switch -exact -- $func_def {
no-macro-info {
xfail "executable includes no macro debugging information"
return 1
}
timeout {
fail "info macro $macro $where (timeout)"
}
default {
fail "info macro $macro $where"
}
}
}
return 0
}
# List the function FUNC, and then show the definition of MACRO,
# expecting the result EXPECTED.
proc list_and_check_macro {func macro expected} {
gdb_test "list $func" ".*${func}.*"
return [check_macro $macro $expected "after `list $func'"]
}
if {[list_and_check_macro main WHERE {macscp1.c {before macscp1_3}}]} {
return 0
}
list_and_check_macro macscp2_2 WHERE {macscp2.h macscp1.c {before macscp2_2}}
list_and_check_macro macscp3_2 WHERE {macscp3.h macscp1.c {before macscp3_2}}
# Although GDB's macro table structures distinguish between multiple
# #inclusions of the same file, GDB's other structures don't. So the
# `list' command here doesn't reliably select one #inclusion or the
# other, even though it could. It would be nice to eventually change
# GDB's structures to handle this correctly.
gdb_test "list macscp4_2_from_macscp2" ".*macscp4_2_, MACSCP4_INCLUSION.*"
switch -exact -- [info_macro WHERE] {
{macscp4.h macscp2.h macscp1.c {before macscp4_2_..., from macscp2.h}} {
pass "info macro WHERE after `list macscp_4_2_from_macscp2'"
}
{macscp4.h macscp3.h macscp1.c {before macscp4_2_..., from macscp3.h}} {
# setup_kfail "gdb/555"
fail "info macro WHERE after `list macscp_4_2_from_macscp2' (gdb/555)"
}
timeout {
fail "info macro WHERE after `list macscp_4_2_from_macscp2' (timeout)"
}
default { fail "info macro WHERE after `list macscp_4_2_from_macscp2'" }
}
gdb_test "list macscp4_2_from_macscp3" ".*macscp4_2_, MACSCP4_INCLUSION.*"
switch -exact -- [info_macro WHERE] {
{macscp4.h macscp3.h macscp1.c {before macscp4_2_..., from macscp3.h}} {
pass "info macro WHERE after `list macscp_4_2_from_macscp3'"
}
{macscp4.h macscp2.h macscp1.c {before macscp4_2_..., from macscp2.h}} {
# setup_kfail "gdb/555"
fail "info macro WHERE after `list macscp_4_2_from_macscp3' (gdb/555)"
}
timeout {
fail "info macro WHERE after `list macscp_4_2_from_macscp3' (timeout)"
}
default { fail "info macro WHERE after `list macscp_4_2_from_macscp3'" }
}
#### Test the selection of the macro scope by the current frame.
### A table of functions, in the order they will be reached, which is
### also the order they appear in the preprocessed output. Each entry
### has the form {FUNCNAME WHERE KFAILWHERE}, where:
### - FUNCNAME is the name of the function,
### - WHERE is the definition we expect to see for the macro `WHERE', as
### returned by `info_macro', and
### - KFAILWHERE is an alternate definition which should be reported
### as a `known failure', due to GDB's inability to distinguish multiple
### #inclusions of the same file.
### KFAILWHERE may be omitted.
set funcs {
{
macscp1_1
{macscp1.c {before macscp1_1}}
}
{
macscp2_1
{macscp2.h macscp1.c {before macscp2_1}}
}
{
macscp4_1_from_macscp2
{macscp4.h macscp2.h macscp1.c {before macscp4_1_..., from macscp2.h}}
{macscp4.h macscp3.h macscp1.c {before macscp4_1_..., from macscp3.h}}
}
{
macscp4_2_from_macscp2
{macscp4.h macscp2.h macscp1.c {before macscp4_2_..., from macscp2.h}}
{macscp4.h macscp3.h macscp1.c {before macscp4_2_..., from macscp3.h}}
}
{
macscp2_2
{macscp2.h macscp1.c {before macscp2_2}}
}
{
macscp1_2
{macscp1.c {before macscp1_2}}
}
{
macscp3_1
{macscp3.h macscp1.c {before macscp3_1}}
}
{
macscp4_1_from_macscp3
{macscp4.h macscp3.h macscp1.c {before macscp4_1_..., from macscp3.h}}
{macscp4.h macscp2.h macscp1.c {before macscp4_1_..., from macscp2.h}}
}
{
macscp4_2_from_macscp3
{macscp4.h macscp3.h macscp1.c {before macscp4_2_..., from macscp3.h}}
{macscp4.h macscp2.h macscp1.c {before macscp4_2_..., from macscp2.h}}
}
{
macscp3_2
{macscp3.h macscp1.c {before macscp3_2}}
}
{
macscp1_3
{macscp1.c {before macscp1_3}}
}
}
# Start the program running.
if {! [runto_main]} {
fail "macro tests suppressed: couldn't run to main"
return 0
}
# Set a breakpoint on each of the functions.
foreach func_entry $funcs {
set func [lindex $func_entry 0]
gdb_test "break $func" "Breakpoint.*"
}
# Run to each of the breakpoints and check the definition (or lack
# thereof) of each macro.
for {set i 0} {$i < [llength $funcs]} {incr i} {
set func_entry [lindex $funcs $i]
set func [lindex $func_entry 0]
set expected [lindex $func_entry 1]
set kfail_expected [lindex $func_entry 2]
# Run to the breakpoint for $func.
gdb_test "continue" "Breakpoint $decimal, $func .*" "continue to $func"
# Check the macro WHERE.
set result [info_macro WHERE]
if {[string compare $result $expected] == 0} {
pass "info macro WHERE stopped in $func"
} elseif {[string compare $result $kfail_expected] == 0} {
# setup_kfail "gdb/555"
fail "info macro WHERE stopped in $func (gdb/555)"
} elseif {[string compare $result timeout] == 0} {
fail "info macro WHERE stopped in $func (timeout)"
} else {
fail "info macro WHERE stopped in $func"
}
# Check that the BEFORE_<func> macros for all prior functions are
# #defined, and that those for all subsequent functions are not.
for {set j 0} {$j < [llength $funcs]} {incr j} {
if {$j != $i} {
set func_j_entry [lindex $funcs $j]
set func_j [lindex $func_j_entry 0]
set before_macro "BEFORE_[string toupper $func_j]"
set test_name \
"$before_macro defined/undefined when stopped at $func"
set result [info_macro $before_macro]
# We can't get the right scope info when we're stopped in
# the macro4_ functions.
if {[string match macscp4_* $func]} {
# setup_kfail "gdb/555"
set test_name "$test_name (gdb/555)"
}
if {$j < $i} {
if {[llength $result] >= 2 && \
[string compare [lindex $result end] {}] == 0} {
pass $test_name
} elseif {[string compare $result timeout] == 0} {
fail "$test_name (timeout)"
} else {
fail "$test_name"
}
} elseif {$j > $i} {
switch -- [lindex $result end] {
undefined { pass $test_name }
timeout { fail "$test_name (timeout)" }
default {
fail "$test_name"
}
}
}
set until_macro "UNTIL_[string toupper $func_j]"
set test_name \
"$until_macro defined/undefined when stopped at $func"
set result [info_macro $until_macro]
# We can't get the right scope info when we're stopped in
# the macro4_ functions.
if {[string match macscp4_* $func]} {
# setup_kfail "gdb/555"
set test_name "$test_name (gdb/555)"
}
if {$j <= $i} {
switch -- [lindex $result end] {
undefined { pass $test_name }
timeout { fail "$test_name (timeout)" }
default {
fail "$test_name"
}
}
} elseif {$j > $i} {
if {[llength $result] >= 2 && \
[string compare [lindex $result end] {}] == 0} {
pass $test_name
} elseif {[string compare $result timeout] == 0} {
fail "$test_name (timeout)"
} else {
fail "$test_name"
}
}
}
}
}
Go to most recent revision | Compare with Previous | Blame | View Log