URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [gdb/] [testsuite/] [gdb.trace/] [passc-dyn.exp] - Rev 193
Go to most recent revision | Compare with Previous | Blame | View Log
# Copyright 1998, 2005, 2007, 2008 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
# This file was written by Michael Snyder (msnyder@cygnus.com)
load_lib "trace-support.exp";
if $tracelevel then {
strace $tracelevel
}
set prms_id 0
set bug_id 0
gdb_exit
gdb_start
if [istarget "m68k-*-elf"] then {
load_lib "emc-support.exp";
set srcfile gdb_c_test.c
set binfile [board_info target d490_binfile];
gdb_test "set remotetimeout 6" "" ""
set timeout 500
gdb_target_monitor $binfile
# Give a TSTOP and ignore errors, to make sure any previous trace is off
gdb_test "tstop" "" ""
gdb_test "tfind none" "" ""
send_gdb "compare-sections CS\n"
gdb_expect {
-re "MIS-MATCHED.*$gdb_prompt $" {
untested passc-dyn.exp
return -1
all tests in this module will fail.";
}
-re ".*$gdb_prompt $" { }
}
} else {
set testfile "actions"
set srcfile ${testfile}.c
set binfile $objdir/$subdir/$testfile
if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
executable {debug nowarnings}] != "" } {
untested passc-dyn.exp
return -1
}
gdb_load $binfile
gdb_test "tstop" "" ""
gdb_test "tfind none" "" ""
runto_main
}
gdb_reinitialize_dir $srcdir/$subdir
# We generously give ourselves one "pass" if we successfully
# detect that this test cannot be run on this target!
if { ![gdb_target_supports_trace] } then {
pass "Current target does not support trace"
return 1;
}
# If testing on a remote host, download the source file.
# remote_download host $srcdir/$subdir/$srcfile
#
# test passcount dynamically (live target)
#
set baseline [gdb_find_recursion_test_baseline $srcfile];
if { $baseline == -1 } then {
fail "Could not find gdb_recursion_test function"
return;
}
# define relative source line numbers:
# all subsequent line numbers are relative to this first one (baseline)
set testline2 [expr $baseline + 4]
set testline3 [expr $baseline + 5]
set testline4 [expr $baseline + 6]
#
# test passcount command semantics (live test)
#
## Set three tracepoints with three different passcounts.
## Verify that the experiment stops after the one with the
## lowest passcount is hit.
gdb_delete_tracepoints
set tdp2 [gdb_gettpnum "$testline2"]
set tdp3 [gdb_gettpnum "$testline3"]
set tdp4 [gdb_gettpnum "$testline4"]
if { $tdp2 <= 0 || $tdp3 <= 0 || $tdp4 <= 0 } then {
fail "setting tracepoints"
return;
}
gdb_test "passcount 4 $tdp2" "Setting tracepoint $tdp2's passcount to 4" \
"4.5: set passcount for tracepoint $tdp2"
gdb_test "passcount 2 $tdp3" "Setting tracepoint $tdp3's passcount to 2" \
"4.5: set passcount for tracepoint $tdp3"
gdb_test "passcount 3 $tdp4" "Setting tracepoint $tdp4's passcount to 3" \
"4.5: set passcount for tracepoint $tdp4"
gdb_test "tstart" "" ""
if [istarget "m68k-*-elf"] then {
gdb_emclaptop_command "85,1,2,3,4,5,6"
sleep 5
gdb_emclaptop_command "85,7,8,9,A,B,C"
sleep 5
gdb_emclaptop_command "85,D,E,F,10,11,12"
sleep 5
# gdb_test "tstop"
##
## Note! Must NOT give the tstop command, because the passcount
## has already stopped the experiment. You would not
## think this would be an error, but in EMC's mind it is...
##
} else {
gdb_test "break end" "" ""
gdb_test "continue" \
"Continuing.*Breakpoint $decimal, end.*" \
"run trace experiment"
gdb_test "tstop" "" ""
}
gdb_test "tfind none" "" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x -1 x" ""] {
untested passc-dyn.exp
return -1
}
gdb_test "tfind tracepoint $tdp2" "" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 0 x" ""] {
untested passc-dyn.exp
return -1
}
gdb_test "tfind tracepoint $tdp3" "" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 1 x" ""] {
untested passc-dyn.exp
return -1
}
gdb_test "tfind tracepoint $tdp4" "" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 2 x" ""] {
untested passc-dyn.exp
return -1
}
gdb_test "tfind tracepoint $tdp2" "" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 3 x" ""] {
untested passc-dyn.exp
return -1
}
gdb_test "tfind tracepoint $tdp3" "" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 4 x" ""] {
untested passc-dyn.exp
return -1
}
## We should now be at the last frame, because this frame's passcount
## should have caused collection to stop. If we do a tfind now,
## it should fail.
gdb_test "tfind" "failed to find.*" "4.5: dynamic passcount test"
# Finished!
gdb_test "tfind none" "" ""
Go to most recent revision | Compare with Previous | Blame | View Log