URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [include/] [aout/] [sun4.h] - Rev 281
Go to most recent revision | Compare with Previous | Blame | View Log
/* SPARC-specific values for a.out files Copyright 2001 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ /* Some systems, e.g., AIX, may have defined this in header files already included. */ #undef TARGET_PAGE_SIZE #define TARGET_PAGE_SIZE 0x2000 /* 8K. aka NBPG in <sys/param.h> */ /* Note that some SPARCs have 4K pages, some 8K, some others. */ #define SEG_SIZE_SPARC TARGET_PAGE_SIZE #define SEG_SIZE_SUN3 0x20000 /* Resolution of r/w protection hw */ #define TEXT_START_ADDR TARGET_PAGE_SIZE /* Location 0 is not accessible */ #define N_HEADER_IN_TEXT(x) 1 /* Non-default definitions of the accessor macros... */ /* Segment size varies on Sun-3 versus Sun-4. */ #define N_SEGSIZE(x) (N_MACHTYPE(x) == M_SPARC? SEG_SIZE_SPARC: \ N_MACHTYPE(x) == M_68020? SEG_SIZE_SUN3: \ /* Guess? */ TARGET_PAGE_SIZE) /* Virtual Address of text segment from the a.out file. For OMAGIC, (almost always "unlinked .o's" these days), should be zero. Sun added a kludge so that shared libraries linked ZMAGIC get an address of zero if a_entry (!!!) is lower than the otherwise expected text address. These kludges have gotta go! For linked files, should reflect reality if we know it. */ /* This differs from the version in aout64.h (which we override by defining it here) only for NMAGIC (we return TEXT_START_ADDR+EXEC_BYTES_SIZE; they return 0). */ #define N_TXTADDR(x) \ (N_MAGIC(x)==OMAGIC? 0 \ : (N_MAGIC(x) == ZMAGIC && (x).a_entry < TEXT_START_ADDR)? 0 \ : TEXT_START_ADDR+EXEC_BYTES_SIZE) /* When a file is linked against a shared library on SunOS 4, the dynamic bit in the exec header is set, and the first symbol in the symbol table is __DYNAMIC. Its value is the address of the following structure. */ struct external_sun4_dynamic { /* The version number of the structure. SunOS 4.1.x creates files with version number 3, which is what this structure is based on. According to gdb, version 2 is similar. I believe that version 2 used a different type of procedure linkage table, and there may have been other differences. */ bfd_byte ld_version[4]; /* The virtual address of a 28 byte structure used in debugging. The contents are filled in at run time by ld.so. */ bfd_byte ldd[4]; /* The virtual address of another structure with information about how to relocate the executable at run time. */ bfd_byte ld[4]; }; /* The size of the debugging structure pointed to by the debugger field of __DYNAMIC. */ #define EXTERNAL_SUN4_DYNAMIC_DEBUGGER_SIZE (24) /* The structure pointed to by the linker field of __DYNAMIC. As far as I can tell, most of the addresses in this structure are offsets within the file, but some are actually virtual addresses. */ struct internal_sun4_dynamic_link { /* Linked list of loaded objects. This is filled in at runtime by ld.so and probably by dlopen. */ unsigned long ld_loaded; /* The address of the list of names of shared objects which must be included at runtime. Each entry in the list is 16 bytes: the 4 byte address of the string naming the object (e.g., for -lc this is "c"); 4 bytes of flags--the high bit is whether to search for the object using the library path; the 2 byte major version number; the 2 byte minor version number; the 4 byte address of the next entry in the list (zero if this is the last entry). The version numbers seem to only be non-zero when doing library searching. */ unsigned long ld_need; /* The address of the path to search for the shared objects which must be included. This points to a string in PATH format which is generated from the -L arguments to the linker. According to the man page, ld.so implicitly adds ${LD_LIBRARY_PATH} to the beginning of this string and /lib:/usr/lib:/usr/local/lib to the end. The string is terminated by a null byte. This field is zero if there is no additional path. */ unsigned long ld_rules; /* The address of the global offset table. This appears to be a virtual address, not a file offset. The first entry in the global offset table seems to be the virtual address of the sun4_dynamic structure (the same value as the __DYNAMIC symbol). The global offset table is used for PIC code to hold the addresses of variables. A dynamically linked file which does not itself contain PIC code has a four byte global offset table. */ unsigned long ld_got; /* The address of the procedure linkage table. This appears to be a virtual address, not a file offset. On a SPARC, the table is composed of 12 byte entries, each of which consists of three instructions. The first entry is sethi %hi(0),%g1 jmp %g1 nop These instructions are changed by ld.so into a jump directly into ld.so itself. Each subsequent entry is save %sp, -96, %sp call <address of first entry in procedure linkage table> <reloc_number | 0x01000000> The reloc_number is the number of the reloc to use to resolve this entry. The reloc will be a JMP_SLOT reloc against some symbol that is not defined in this object file but should be defined in a shared object (if it is not, ld.so will report a runtime error and exit). The constant 0x010000000 turns the reloc number into a sethi of %g0, which does nothing since %g0 is hardwired to zero. When one of these entries is executed, it winds up calling into ld.so. ld.so looks at the reloc number, available via the return address, to determine which entry this is. It then looks at the reloc and patches up the entry in the table into a sethi and jmp to the real address followed by a nop. This means that the reloc lookup only has to happen once, and it also means that the relocation only needs to be done if the function is actually called. The relocation is expensive because ld.so must look up the symbol by name. The size of the procedure linkage table is given by the ld_plt_sz field. */ unsigned long ld_plt; /* The address of the relocs. These are in the same format as ordinary relocs. Symbol index numbers refer to the symbols pointed to by ld_stab. I think the only way to determine the number of relocs is to assume that all the bytes from ld_rel to ld_hash contain reloc entries. */ unsigned long ld_rel; /* The address of a hash table of symbols. The hash table has roughly the same number of entries as there are dynamic symbols; I think the only way to get the exact size is to assume that every byte from ld_hash to ld_stab is devoted to the hash table. Each entry in the hash table is eight bytes. The first four bytes are a symbol index into the dynamic symbols. The second four bytes are the index of the next hash table entry in the bucket. The ld_buckets field gives the number of buckets, say B. The first B entries in the hash table each start a bucket which is chained through the second four bytes of each entry. A value of zero ends the chain. The hash function is simply h = 0; while (*string != '\0') h = (h << 1) + *string++; h &= 0x7fffffff; To look up a symbol, compute the hash value of the name. Take the modulos of hash value and the number of buckets. Start at that entry in the hash table. See if the symbol (from the first four bytes of the hash table entry) has the name you are looking for. If not, use the chain field (the second four bytes of the hash table entry) to move on to the next entry in this bucket. If the chain field is zero you have reached the end of the bucket, and the symbol is not in the hash table. */ unsigned long ld_hash; /* The address of the symbol table. This is a list of external_nlist structures. The string indices are relative to the ld_symbols field. I think the only way to determine the number of symbols is to assume that all the bytes between ld_stab and ld_symbols are external_nlist structures. */ unsigned long ld_stab; /* I don't know what this is for. It seems to always be zero. */ unsigned long ld_stab_hash; /* The number of buckets in the hash table. */ unsigned long ld_buckets; /* The address of the symbol string table. The first string in this string table need not be the empty string. */ unsigned long ld_symbols; /* The size in bytes of the symbol string table. */ unsigned long ld_symb_size; /* The size in bytes of the text segment. */ unsigned long ld_text; /* The size in bytes of the procedure linkage table. */ unsigned long ld_plt_sz; }; /* The external form of the structure. */ struct external_sun4_dynamic_link { bfd_byte ld_loaded[4]; bfd_byte ld_need[4]; bfd_byte ld_rules[4]; bfd_byte ld_got[4]; bfd_byte ld_plt[4]; bfd_byte ld_rel[4]; bfd_byte ld_hash[4]; bfd_byte ld_stab[4]; bfd_byte ld_stab_hash[4]; bfd_byte ld_buckets[4]; bfd_byte ld_symbols[4]; bfd_byte ld_symb_size[4]; bfd_byte ld_text[4]; bfd_byte ld_plt_sz[4]; };
Go to most recent revision | Compare with Previous | Blame | View Log