OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-6.8/] [sim/] [ChangeLog] - Rev 321

Go to most recent revision | Compare with Previous | Blame | View Log

2010-07-20  Jeremy Bennett  <jeremy.bennett@embecosm.com>

        * configure.ac: Added test for zlib from binutils/bfd
        * configure: Regenerated.
        * Makefile.in: Added LIBS.

2010-06-30  Jeremy Bennett  <jeremy.bennett@embecosm.com>

        * or32: New directory added.
        * configure.ac: Added or32 as architecture
        * configure: Regenerated.

2008-02-05  DJ Delorie  <dj@redhat.com>

        * configure.ac (v850): V850 now has a testsuite.
        * configure (v850): Likewise.

2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>

        Updated copyright notices for most files.

2007-12-19  DJ Delorie  <dj@redhat.com>

        * frv/frv.c (frvbf_cut): Only look at the six LSBs of
        cut_point.

2007-10-22  Hans-Peter Nilsson  <hp@axis.com>

        * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
        cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
        cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
        cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
        cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
        cris/semcrisv32f-switch.c: Regenerate.

2007-08-24  Joel Brobecker  <brobecker@adacore.com>

        Switch the license of all files explicitly copyright the FSF
        to GPLv3.

2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>

        * Makefile.in: Add dummy "pdf" target.

2007-02-20  Hans-Peter Nilsson  <hp@axis.com>

        * cris/traps.c (dump_statistics): Change format for cycle numbers
        to %llu and cast parameters to unsigned long long.

2007-02-16  Thiemo Seufer  <ths@mips.com>

        * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.

2007-01-28  Manuel Lauss  <slauss@resi.at>

        * configure.ac (sh64-*-*): Change to sh64*-*-*.
        (sh-*-*): Change to sh*-*-*.
        * configure: Regenerated.

2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>

        Updated copyright notices for most files.

2006-12-20  Hans-Peter Nilsson  <hp@axis.com>

        * Makefile.in (autoconf-common autoheader-common): Only run
        autoheader on subdirs with a file config.in.

        * configure.ac (common): Make the default "yes" for all targets
        with sim subdirs.
        * configure: Regenerate.

        * Makefile.in (autoconf-common autoheader-common): In documented
        usage, say SHELL=/bin/sh.
        (.PHONY): Add autoheader-common.

        * MAINTAINERS: Add self as authorized committer for *.

2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
            Hans-Peter Nilsson  <hp@axis.com>

        * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
        (cris_unknown_syscall_action): Declare.
        * cris/sim-if.c (cris_unknown_syscall_action): Define.
        (cris_options): Add cris-unknown-syscall option.
        (cris_option_handler): Correct comment about and error message for
        invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
        * cris/traps.c: Include stdarg.h
        (cris_unknown_syscall): New function.
        (cris_break_13_handler): Instead of sim_io_eprintf and
        sim_engine_halt, call cris_unknown_syscall to handle more or less
        unknown syscalls.  Adjust code as necessary to handle return
        value.

2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * MAINTAINERS: Add Dave Brolley for sh64.

2006-09-30  Hans-Peter Nilsson  <hp@axis.com>

        * cris/traps.c (TARGET_PIPE_BUF): New macro.
        (cris_pipe_empty): Correct initialization of "remaining".  Only
        adjust the "write" return value if more than TARGET_PIPE_BUF bytes
        are written.

2006-09-29  Hans-Peter Nilsson  <hp@axis.com>

        * cris/configure.ac: Check for limits.h and sys/param.h.
        * cris/configure, cris/config.in: Rebuild.
        * cris/traps.c (SIM_PATHMAX): New macro.
        (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.

2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>

        * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
        * Makefile.in (FLAGS_TO_PASS): Include libdir.
        * configure: Regenerated.

2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>

        * cris/configure: Regenerated.

2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>

        * cris/configure: Regenerated.

2006-05-05  Andreas Schwab  <schwab@suse.de>

        * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
        * configure: Regenerate.

        * Makefile.in (CFLAGS_FOR_BUILD): Define.
        (CC_FOR_BUILD): Don't override.
        (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.

2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * MAINTAINERS: Add an "Authorized committers" section, and list
        DJ Delorie for v850.

2006-04-08  Hans-Peter Nilsson  <hp@axis.com>

        * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.

2006-04-03  Hans-Peter Nilsson  <hp@axis.com>

        * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
        * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
        (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
        (all): Depend on rvdummy$(EXEEXT).
        * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
        sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
        default off.
        * cris/configure: Regenerate.
        * cris/cris-sim.h (cris_have_900000xxif): Declare here.
        (enum cris_interrupt_type, crisv10deliver_interrupt)
        (crisv32deliver_interrupt: New declarations.
        * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
        sim_events_tickn and set state-events member work_pending when it's
        time for the next event.
        [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
        interrupt-delivery function.
        * cris/crisv10f.c (MY (deliver_interrupt)): New function.
        * cris/crisv32f.c (MY (deliver_interrupt)): New function.
        * cris/devices.c: Include hw-device.h.
        (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
        (device_io_write_buffer): Only perform 0x900000xx-functions if
        cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
        call hw_io_write_buffer.  Add return 0 last in function.
        * cris/sim-if.c (cris_have_900000xxif): Now global.
        (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
        Force "-model" option, effectively.
        * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
        (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.

2006-04-02  Hans-Peter Nilsson  <hp@axis.com>

        * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
        (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
        (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.

2006-03-13  DJ Delorie  <dj@redhat.com>

        * MAINTAINERS: Add self as m32c sim maintainer.

2006-02-23  Hans-Peter Nilsson  <hp@axis.com>

        * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
        mapping.
        (cris_break_13_handler) <case TARGET_SYS_time>: New case.

2006-01-23  Jim Blandy  <jimb@redhat.com>

        Add simulator for Renesas M32C and M16C.

        * m32c: New directory.
        * configure.ac: Add entry for Renesas M32C.
        * configure: Regenerate.

2006-01-10  Hans-Peter Nilsson  <hp@axis.com>

        * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
        cycle count for the current insn.

2005-12-06  Hans-Peter Nilsson  <hp@axis.com>

        * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
        cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
        cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
        cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.

2005-12-05  Hans-Peter Nilsson  <hp@axis.com>

        * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
        cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
        cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
        cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
        cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
        cris/semcrisv32f-switch.c: Regenerate.

2005-11-20  Hans-Peter Nilsson  <hp@axis.com>

        * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
        (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
        TARGET_O_WRONLY.
        (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
        F_GETFL on fd 0, 1 and 2.

2005-11-17  Hans-Peter Nilsson  <hp@axis.com>

        * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
        last_open_fd, last_open_flags.
        * cris/traps.c: Don't include targ-vals.h.
        (TARGET_O_ACCMODE): Define.
        (cris_break_13_handler): Set new _sim_cpu members.
        <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
        Rearrange code as switch.  Emit "unimplemented" abort for
        unimplemented fcntl calls.

        * cris/traps.c (TARGET_SYS_stat): Define.
        (syscall_stat32_map): Add entry for TARGET_SYS_stat.
        (cris_break_13_handler) <case TARGET_SYS_stat>: New case.

2005-11-16  Hans-Peter Nilsson  <hp@axis.com>

        * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
        low 32 bits are used after an unsigned long cast.

2005-05-28  Hans-Peter Nilsson  <hp@axis.com>

        * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.

2005-05-26  Chris Demetriou  <cgd@netbsd.org>

        * MAINTAINERS: Update my mail address, move myself to the
        "Past maintainers" section.

2005-05-17  Corinna Vinschen  <vinschen@redhat.com>

        * configure.ac: Add igen to v850 build.
        * configure: Regenerate.

2005-04-29  Paul Brook  <paul@codesourcery.com>

        * common/callback.c (PIPE_BUF): Provide default definition.
        (os_lstat): Use stat if lstat is not available on the host.
        (os_ftruncate): Return EINVAL if not available on the host.
        (os_truncate): Ditto.
        * common/configure.ac: Check for lstat, truncate and ftruncate.
        * common/configure: Regenerate.
        * common/config.in: Regenerate.

2005-04-27  Paul Brook  <paul@codesourcery.com>

        * common/Make-common.in: Add $(EXEEXT) to "run".

2005-04-18  Hans-Peter Nilsson  <hp@axis.com>

        * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
        For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
        implemented.  In call to create_map, pad length argument to 8k. 

2005-04-15  Corinna Vinschen  <vinschen@redhat.com>

        * configure.ac: Add explicit sh64 case.
        * configure: Regenerate.

2005-03-30  Paul Brook  <paul@codesourcery.com>

        * arm/wrapper.c: Provide SIGTRAP and SIGBUS.

2005-03-24  Hans-Peter Nilsson  <hp@axis.com>

        * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
        include cgen-ops.h in decodev10.c and decodev32.c.
        * cris/sim-main.h: Don't include cgen-ops.h here.
        * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
        cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
        cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
        cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
        cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
        cris/semcrisv32f-switch.c: Regenerate.

        * cris/traps.c (cris_break_13_handler) <case
        TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
        sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.

2005-03-23  Mark Kettenis  <kettenis@gnu.org>

        * cris/configure: Regenerate.

2005-02-28  Jim Blandy  <jimb@redhat.com>

        * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
        mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
        Regenerated, after change to common/aclocal.m4.

2005-02-18  Corinna Vinschen  <vinschen@redhat.com>

        * iq2000: New target subdirectory.
        * configure.ac: Add iq2000 target.
        * configure: Regenerate.

2005-01-29  Hans-Peter Nilsson  <hp@axis.com>

        * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
        (realclean, install): Fail if subdir make failed.

2005-01-28  Hans-Peter Nilsson  <hp@axis.com>

        * cris: New directory, simulator for Axis Communications CRIS
        including CRIS v32, CGEN-based.
        * configure.ac: Add corresponding configury.
        * configure: Regenerate.

2005-01-17  Andrew Cagney  <cagney@gnu.org>

        * configure.ac: For mips*-*-* and mn10300*-*-* configure the
        common directory.  Remove sparc*-*-* from list.
        
2005-01-11  Andrew Cagney  <cagney@gnu.org>

        * Makefile.in (autoconf-common autoheader-common): Add --force to
        autoconf and autoheader.
        (autoconf-common autoheader-common)
        (autoconf-install autoheader-install): Check for configure.ac, not
        configure.in.
        * configure.ac: Delete AC_CONFIG_AUX_DIR.
        * configure: Re-generate.

2005-01-07  Andrew Cagney  <cagney@gnu.org>

        * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
        correctly calls AC_CONFIG_SUBDIRS.
        * configure: Re-generate.

2004-12-01  Andrew Cagney  <cagney@gnu.org>

        * i960, h8500: Delete directory.

2004-11-12  Andrew Cagney  <cagney@gnu.org>

        * d30v, fr30, mn10200, z8k: Delete directory.

2004-03-10  Ben Elliston  <bje@gnu.org>

        * MAINTAINERS: Update my mail address.

2004-01-26  Chris Demetriou  <cgd@broadcom.com>

        * configure.in (mips*-*-*): Configure in testsuite.
        * configure: Regenerate.

2003-10-08  Dave Brolley  <brolley@redhat.com>

        * configure.in: Move frv handling to alphabetically correct placement.

2003-09-03  Andreas Schwab  <schwab@suse.de>

        * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).

2003-08-29  Dave Brolley  <brolley@redhat.com>

        * MAINTAINERS: Add myself as maintainer of the FRV port.

2003-08-20  Michael Snyder  <msnyder@redhat.com>
            Dave Brolley  <brolley@redhat.com>

        * frv/: New directory, simulator for the Fujitsu FRV.
        * configure.in: Add frv configury.
        * configure: Regenerate.

2003-08-10  Ben Elliston  <bje@wasabisystems.com>

        * MAINTAINERS: Update my mail address.

2003-08-09  Andrew Cagney  <cagney@redhat.com>

        * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
        maintenance.  List igen and sh maintainers.  Mention that target
        and global maintainers pick up the slack.

2003-07-09  Michael Snyder  <msnyder@redhat.com>

        * configure.in: Add testsuite to extra_subdirs for sh.
        * configure: Regenerate.

2003-01-23  Nick Clifton  <nickc@redhat.com>

        * Add sh2e support:

2002-04-02  Alexandre Oliva  <aoliva@redhat.com>

        * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.

2002-08-24  Geoffrey Keating  <geoffk@redhat.com>

        * MAINTAINERS: Update my email address.

2002-07-17  Andrew Cagney  <ac131313@redhat.com>

        * w65/: Delete directory.

2002-07-16  Andrew Cagney  <ac131313@redhat.com>

        * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
        * configure: Re-generate.

2002-07-13  Andrew Cagney  <ac131313@redhat.com>

        * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
        * configure: Re-generate.
        
2002-06-16  Andrew Cagney  <ac131313@redhat.com>

        * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
        id, date and host to be overriden by NAME, ID, DATE and HOST
        respectfully.  Use ISO dates.

Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>

        * Makefile.in (ChangeLog): New makefile variable.
        * README-HACKING: Mention the ChangeLog makefile variable.

2002-06-01  Andrew Cagney  <ac131313@redhat.com>

        * tic80/: Delete directory.

2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>

        * MAINTAINERS: Update my email address.

2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * MAINTAINERS: Record self as maintainer of m68hc11 simulator.

2002-03-01  Frank Ch. Eigler  <fche@redhat.com>

        * MAINTAINERS: Record self as a co-maintainer of just common/.

2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>

        * MAINTAINERS: Point to GDB files describing overall maintaince
        and check-in procedures.

2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>

        * MAINTAINERS: Add myself for ARM portions.

2001-10-19  Andrew Cagney  <ac131313@redhat.com>

        * configure.in: When Linux or NetBSD, enable PowerPC simulator.
        * configure: Re-generate.

2001-02-16  Ben Elliston  <bje@redhat.com>

        * MAINTAINERS: Add myself for common portions.

2001-01-15  Chris Demetriou  <cgd@broadcom.com>

        * MAINTAINERS: Added self and Andrew for the mips sim.

2000-10-25  Geoff Keating  <geoffk@cygnus.com>

        * MAINTAINERS: Added self and Andrew for the ppc sim.

Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
        * m68hc11: New directory.
        * configure.in: Add.
        * configure: Regenerate.

Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * tic80: New directory.
        * configure.in: Add configury.
        * configure: Regenerate.

2000-04-20  Nick Clifton  <nickc@cygnus.com>

        * configure.in (extra_subdirs): Add testsuite to strongarm
        directories. 
        * configure: Regenerate.

Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * MAINTAINERS: New file.  Blank.

1999-11-18  Ben Elliston  <bje@cygnus.com>

        * configure.in: Require autoconf 2.13 and remove obsolete
        invocation of AC_C_CROSS.
        * configure: Regenerate.

1999-09-29  Doug Evans  <devans@casey.cygnus.com>

        * configure.in: Configure the testsuite directory for thumb.
        * configure: Regenerate.

1999-07-16  Ben Elliston  <bje@cygnus.com>

        * configure.in: Configure the testsuite directory for arm.
        * configure: Regenerate.

1999-04-08  Nick Clifton  <nickc@cygnus.com>

        * configure.in: Add support for MCore target.
        * configure: Regenerate.

1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>

        * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
        RUNTEST instead of commenting out, fixes portability problem.

1999-02-08  Nick Clifton  <nickc@cygnus.com>

        * configure.in: Add support for StrongARM target.
        * configure: Regenerate.

1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)

        * configure.in: Require autoconf 2.12.1 or higher.

1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>

        * configure.in (i960-*-*): Add.
        * configure: Rebuild.

Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>

        * configure.in: Added case for fr30-*-*.
        * configure: Regenerated.

Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>

        * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
        to allow successful operation on Windows.

Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>

        * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
        check can be invoked recursively.

Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>

        * configure.in: Build simulator on sparclite and sparc86x targets.
        * configure: Regenerate.

Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>

        * Makefile.in (autoconf-common autoheader-common): Don't pass -l
        to autoconf and autoheader.

Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>

        * Makefile.in (autoconf-common autoheader-common): Pass `-l
        ../common' to autoconf and autoheader.  Unconditionally run
        autoconf in every subdir.
        (autoconf-changelog autoheader-changelog): Unconditionally run
        commands in every subdir.
        (autoconf-install autoheader-install): Likewise.

Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>

        * Makefile.in:  Get SHELL from configure.
        * (FLAGS_TO_PASS):  Pass down SHELL.
        * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
        NT native builds.

Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>

        * configure.in (extra_subdirs): Enable igen for mn10300.
        * configure: Re-generate.

Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>

        * configure.in (extra_subdirs): Add support for thumb target.

        * configure (extra_subdirs): Add support for thumb target.

Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (extra_subdirs): Add IGEN directory when MIPS
        target.
        * configure: Regenerate.
        
Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (extra_subdirs): v850ea needs igen.
        * configure: Re-generate.
        
Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (testdir): When a testsuite directory, add that to
        the list of confdirs.

Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (extra_subdirs): Enable igen ready for V850.

Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (w65-*-*, only_if_enabled): Set.
        * configure: Re-generate.
        
Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * configure.in (sparc*-*-*, only_if_enabled): Set
        only_if_enabled=yes.  Check only_if_enabled before enabling a
        simulator.
        * configure: Regenerate.
        
Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>

        * configure.in (extra_subdirs): Add v850e target.

Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>

        * configure.in (extra_subdirs): Add v850ea target.

Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>

        * configure.in (sparc*-*-*): Don't build erc32.
        * configure: Regenerate.

Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>

        * configure.in (m32r-*-*): New target.
        * configure: Regenerate.

        * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.

Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
        thought that .NOEXPORT was the default target.

Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (clean mostlyclean): Restore targets accidentally
        deleted in earlier change.

Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>

        * Makefile.in (autoheader-common, autoheader-changelog,
        autoheader-install): Perform autoheader in addition to autoconf.

Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>

        * Makefile.in (autoconf-install): New target.
        (autoconf-changelog): Try different way to obtain user name.

Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>

        * Makefile.in (autoconf-changelog): New target, update
        ChangeLog for all subdirectories - normally used after
        autoconf-common target.

Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>

        * configure.in (extra_subdirs): Include testsuite for d30v.
        * configure: Regenerate.
        
        * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
        ../gdb/Makefile.in
        (check): New rules - drive the testsuite.

Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)

        * configure.in: Add mn10200 configure lines accidentally
        removed.
        * configure: Regenerated.

Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>

        * configure.in (extra_subdirs): Generalize common sub directory
        into a list.
        (extra_subdirs): For d30v add igen to the list to be built.

Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>

        * configure.in (d30v): New target.
        * configure: Regenerated.
        
Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)

        * configure.in: Don't require GCC to build the mn10200
        simulator anymore.
        * configure: Rebuilt.

Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>

        * configure.in: Don't configure any subdirs if no simulator
        is being built.  Don't use erc32 for sparc64.
        * configure: Regenerated.

Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>

        * Makefile.in (autoconf-common): New target.
        * configure.in: Do configure common.
        * configure: Regenerated.

Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)

        * configure configure.in:  Don't configure common anymore.  Files
        from common are now built in the individual simualtor directories.
        This fixes problems with the WinGDB build procedure.

Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)

        * configure: Enable the mn10200 simulator.

Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>

        * configure.in (configdirs): Add common.
        * configure: Regenerated.

Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * configure.in (powerpc*-*-linux*): Treat like the other powerpc
        system V based targets.
        * configure: Regenerate.

Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>

        * configure.in (--enable-sim-powerpc): Delete.
        (--enable-sim): Add.
        * configure: Regenerated.

Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)

        * configure.in: Only build the V850 simulator if
        we are using gcc.
        * configure: Rebuild.

Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Do build erc32 for DOS and Windows hosts.
        * configure: Rebuild.

Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)

        * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
        be inherited from the parent.  Remove INSTALL_XFORM and
        INSTALL_XFORM1.  Make INSTALL be set from configure.

Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Only build the MIPS simulator if we are using
        gcc.
        * configure: Rebuild.

Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)

        * configure.in (v850-*-*): Added V850 simulator.

Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * configure.in (d10v-*-*): Added D10V simulator.

Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)

        * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
        INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
        (docdir): Removed.
        * configure.in (AC_PREREQ): autoconf 2.5 or higher.
        (AC_PROG_INSTALL): Added.
        * configure: Rebuilt.

Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure.in: Only configure erc32 if using gcc.
        * configure: Rebuild.

Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * configure.in (sim_target): Build PowerPC simulator for powerpc
        System V.4, Solaris, and Elf targets.
        * configure: Regenerate with autoconf 2.10.

Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>

        * configure.in: Only built erc32 simulator on Unix hosts as it
        uses pseudo ttys.
        * configure: Regenerated with autoconf 2.8.

Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

        * erc32: Sparc simulator from the ESA.

Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>

        From: Miles Bader  <miles@gnu.ai.mit.edu>
        * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
        * configure: Regenerate using autoconf.

Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

        * Makefile.in (install): Fix typo.

Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure: Regenerate with autoconf 2.7.

        * Makefile.in (all): Simplify.
        (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
        as in the all target.
        (distclean, maintainer-clean, realclean): Likewise.
        (install): Likewise.

Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>

        * Makefile.in (all): Remove extra '\' char from shell script.

Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>

        * Makefile.in (all): Avoid a for loop with zero elements, even if
        the loop will not be executed because of an if statement.

Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>

        * Makefile.in (install): Add missing semicolon in "fi \".

Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

        * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
        defaults from configure.

        * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
        configure defaults.
        (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
        if either --enable-sim-powerpc is used, or the host compiler is
        GCC.

Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>

        * configure.in (mips*-*-*): Added "mips" simulator target.
        * configure: Re-generated.

Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>

        * Makefile.in (BISON): Remove macro.
        (FLAGS_TO_PASS): Remove BISON.

Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * configure.in:  Explicitly `exit 0' for broken shells.
        * configure:  Rebuilt.

Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>

        * common/run.c (main): Initialize the callbacks.

Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (maintainer-clean): New synonym for realclean.

Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

        * configure.in (powerpc*-*-eabisim*): Only build the simulator if
        the target is powerpc*-*-eabisim*, since it requires GCC to build.

Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

        * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
        <cagney@highland.com.au>.
        * configure: Regnerate from configure.in.

Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>

        * Update all FSF addresses except those in COPYING* files.

Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>

        * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
        submakes either default or passed in value.

Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

        * Makefile.in (all, clean, distclean, mostlyclean, realclean,
          install): Changed targets so that they descend all
          subdirectories in $(SUBDIRS).
          (*-all, *-clean, *-install): Removed targets.

        * configure.in: Don't bother with target makefile fragments, they
          are no longer needed.
        * configure: regenerated.

        * Makefile.in, configure.in: converted to autoconf.
        * configure: New file, generated with autconf 2.4.

Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>

        * Makefile.in: Support ARM.
        * configure.in: Ditto.

Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>

        * Makefile.in: Support W65.
        * configure.in: Ditto.

Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Makefile.in: Add TAGS target.

Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)

        * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
          install-h8300, clean-h8300, all-h8500, install-h8500,
          clean-h8500, all-sh, install-sh, clean-sh): do not echo
          recursion lines.

Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)

        * Makefile.in: remove endian.h trace from h8500

Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)

        * Makefile.in: Add distclean, realclean, and mostlyclean targets.

Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: make all of the all-* target (except all-nothing)
        depend on endian.h, so that if we're not building a simulator, we
        don't built endian

Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)

        * Makefile.in (check, installcheck): Added dummy targets.

Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)

        * Makefile.in (endian): Find endian.c in $(srcdir), and also
        explicitly make it, since some makes apparently don't work with
        VPATH and .c to executable rules (SunOS make for example).

Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * Makefile.in (endian): Add explicit rule for broken makes.

Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)

        * Makefile.in (info, install-info): New targets.
        (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
        level Makefile.

Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)

        * Makefile.in (endian.h): build endian.h via a temporary file so
          that we don't leave an incomplete file lying around on
          interrupted builds.
          (clean): remove endian, e.h, and endian.h.

Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * Makefile.in, configure.in: if target isn't supported, build a
        harmless makefile.


Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.