URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [gdb-7.1/] [gdb/] [monitor.h] - Rev 559
Go to most recent revision | Compare with Previous | Blame | View Log
/* Definitions for remote debugging interface for ROM monitors. Copyright (C) 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. Contributed by Cygnus Support. Written by Rob Savoye for Cygnus. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef MONITOR_H #define MONITOR_H struct target_waitstatus; struct serial; /* This structure describes the strings necessary to give small command sequences to the monitor, and parse the response. CMD is the actual command typed at the monitor. Usually this has embedded sequences ala printf, which are substituted with the arguments appropriate to that type of command. Ie: to examine a register, we substitute the register name for the first arg. To modify memory, we substitute the memory location and the new contents for the first and second args, etc... RESP_DELIM used to home in on the response string, and is used to disambiguate the answer within the pile of text returned by the monitor. This should be a unique string that immediately precedes the answer. Ie: if your monitor prints out `PC: 00000001= ' in response to asking for the PC, you should use `: ' as the RESP_DELIM. RESP_DELIM may be NULL if the res- ponse is going to be ignored, or has no particular leading text. TERM is the string that the monitor outputs to indicate that it is idle, and waiting for input. This is usually a prompt of some sort. In the previous example, it would be `= '. It is important that TERM really means that the monitor is idle, otherwise GDB may try to type at it when it isn't ready for input. This is a problem because many monitors cannot deal with type-ahead. TERM may be NULL if the normal prompt is output. TERM_CMD is used to quit out of the subcommand mode and get back to the main prompt. TERM_CMD may be NULL if it isn't necessary. It will also be ignored if TERM is NULL. */ struct memrw_cmd { char *cmdb; /* Command to send for byte read/write */ char *cmdw; /* Command for word (16 bit) read/write */ char *cmdl; /* Command for long (32 bit) read/write */ char *cmdll; /* Command for long long (64 bit) read/write */ char *resp_delim; /* String just prior to the desired value */ char *term; /* Terminating string to search for */ char *term_cmd; /* String to get out of sub-mode (if necessary) */ }; struct regrw_cmd { char *cmd; /* Command to send for reg read/write */ char *resp_delim; /* String (actually a regexp if getmem) just prior to the desired value */ char *term; /* Terminating string to search for */ char *term_cmd; /* String to get out of sub-mode (if necessary) */ }; struct monitor_ops { int flags; /* See below */ char **init; /* List of init commands. NULL terminated. */ char *cont; /* continue command */ char *step; /* single step */ char *stop; /* Interrupt program string */ char *set_break; /* set a breakpoint. If NULL, monitor implementation sets its own to_insert_breakpoint method. */ char *clr_break; /* clear a breakpoint */ char *clr_all_break; /* Clear all breakpoints */ char *fill; /* Memory fill cmd (addr len val) */ struct memrw_cmd setmem; /* set memory to a value */ struct memrw_cmd getmem; /* display memory */ struct regrw_cmd setreg; /* set a register */ struct regrw_cmd getreg; /* get a register */ /* Some commands can dump a bunch of registers at once. This comes as a set of REG=VAL pairs. This should be called for each pair of registers that we can parse to supply GDB with the value of a register. */ char *dump_registers; /* Command to dump all regs at once */ char *register_pattern; /* Pattern that picks out register from reg dump */ void (*supply_register) (struct regcache *regcache, char *name, int namelen, char *val, int vallen); void (*load_routine) (struct serial *desc, char *file, int hashmark); /* Download routine */ int (*dumpregs) (struct regcache *); /* Dump all registers */ int (*continue_hook) (void); /* Emit the continue command */ int (*wait_filter) (char *buf, /* Maybe contains registers */ int bufmax, int *response_length, struct target_waitstatus * status); char *load; /* load command */ char *loadresp; /* Response to load command */ char *prompt; /* monitor command prompt */ char *line_term; /* end-of-command delimitor */ char *cmd_end; /* optional command terminator */ struct target_ops *target; /* target operations */ int stopbits; /* number of stop bits */ char **regnames; /* array of register names in ascii */ /* deprecated: use regname instead */ const char *(*regname) (int index); /* function for dynamic regname array */ int num_breakpoints; /* If set_break != NULL, number of supported breakpoints */ int magic; /* Check value */ }; /* The monitor ops magic number, used to detect if an ops structure doesn't have the right number of entries filled in. */ #define MONITOR_OPS_MAGIC 600925 /* Flag definitions. */ /* If set, then clear breakpoint command uses address, otherwise it uses an index returned by the monitor. */ #define MO_CLR_BREAK_USES_ADDR 0x1 /* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE as args, else it uses STARTADDR, LENGTH, VALUE as args. */ #define MO_FILL_USES_ADDR 0x2 /* If set, then monitor doesn't automatically supply register dump when coming back after a continue. */ #define MO_NEED_REGDUMP_AFTER_CONT 0x4 /* getmem needs start addr and end addr */ #define MO_GETMEM_NEEDS_RANGE 0x8 /* getmem can only read one loc at a time */ #define MO_GETMEM_READ_SINGLE 0x10 /* handle \r\n combinations */ #define MO_HANDLE_NL 0x20 /* don't expect echos in monitor_open */ #define MO_NO_ECHO_ON_OPEN 0x40 /* If set, send break to stop monitor */ #define MO_SEND_BREAK_ON_STOP 0x80 /* If set, target sends an ACK after each S-record */ #define MO_SREC_ACK 0x100 /* Allow 0x prefix on addresses retured from monitor */ #define MO_HEX_PREFIX 0x200 /* Some monitors require a different command when starting a program */ #define MO_RUN_FIRST_TIME 0x400 /* Don't expect echos when getting memory */ #define MO_NO_ECHO_ON_SETMEM 0x800 /* If set, then register store command expects value BEFORE regname */ #define MO_REGISTER_VALUE_FIRST 0x1000 /* If set, then the monitor displays registers as pairs. */ #define MO_32_REGS_PAIRED 0x2000 /* If set, then register setting happens interactively. */ #define MO_SETREG_INTERACTIVE 0x4000 /* If set, then memory setting happens interactively. */ #define MO_SETMEM_INTERACTIVE 0x8000 /* If set, then memory dumps are always on 16-byte boundaries, even when less is desired. */ #define MO_GETMEM_16_BOUNDARY 0x10000 /* If set, then the monitor numbers its breakpoints starting from 1. */ #define MO_CLR_BREAK_1_BASED 0x20000 /* If set, then the monitor acks srecords with a plus sign. */ #define MO_SREC_ACK_PLUS 0x40000 /* If set, then the monitor "acks" srecords with rotating lines. */ #define MO_SREC_ACK_ROTATE 0x80000 /* If set, then remove useless address bits from memory addresses. */ #define MO_ADDR_BITS_REMOVE 0x100000 /* If set, then display target program output if prefixed by ^O. */ #define MO_PRINT_PROGRAM_OUTPUT 0x200000 /* Some dump bytes commands align the first data with the preceeding 16 byte boundary. Some print blanks and start at the exactly the requested boundary. */ #define MO_EXACT_DUMPADDR 0x400000 /* Rather entering and exiting the write memory dialog for each word byte, we can save time by transferring the whole block without exiting the memory editing mode. You only need to worry about this if you are doing memory downloading. This engages a new write function registered with dcache. */ #define MO_HAS_BLOCKWRITES 0x800000 #define SREC_SIZE 160 extern void monitor_open (char *args, struct monitor_ops *ops, int from_tty); extern void monitor_close (int quitting); extern char *monitor_supply_register (struct regcache *regcache, int regno, char *valstr); extern int monitor_expect (char *prompt, char *buf, int buflen); extern int monitor_expect_prompt (char *buf, int buflen); /* Note: The variable argument functions monitor_printf and monitor_printf_noecho vararg do not take take standard format style arguments. Instead they take custom formats interpretered directly by monitor_vsprintf. */ extern void monitor_printf (char *, ...); extern void monitor_printf_noecho (char *, ...); extern void monitor_write (char *buf, int buflen); extern int monitor_readchar (void); extern char *monitor_get_dev_name (void); extern void init_monitor_ops (struct target_ops *); extern int monitor_dump_reg_block (struct regcache *regcache, char *dump_cmd); #endif
Go to most recent revision | Compare with Previous | Blame | View Log