URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [gdb-7.1/] [gdb/] [or32-tdep.h] - Rev 287
Go to most recent revision | Compare with Previous | Blame | View Log
/* Definitions to target GDB to OpenRISC 1000 32-bit targets. Copyright 2001 Free Software Foundation, Inc. Copyright (C) 2008, 2010 Embecosm Limited Contributor Jeremy Bennett <jeremy.bennett@embecosm.com> This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef OR32_TDEP__H #define OR32_TDEP__H #ifndef TARGET_OR32 #define TARGET_OR32 #endif /*----------------------------------------------------------------------------- This version for the OpenRISC 1000 architecture is a rewrite by Jeremy Bennett of the old GDB 5.3 interface to make use of gdbarch for GDB 6.8. The code tries to follow the GDB coding style. All OR32 specific globals should have names beginning ork1_ or OR32_. Commenting is Doxygen compatible. Much has been stripped out. See the files or32-tdep.c, remote-or32.c and or32-jtag.c for details of what has changed. --------------------------------------------------------------------------*/ /*! Byte array for the TRAP instruction used for breakpoints */ #define OR32_BRK_INSTR_STRUCT {0x21, 0x00, 0x00, 0x01} /*! Numeric instruction used for a breakpoint */ #define OR32_BRK_INSTR 0x21000001 /*! Numeric instruction used for a l.nop NOP_EXIT */ #define OR32_NOP_EXIT 0x15000001 /* Special purpose groups */ #define OR32_SPG_SIZE_BITS 11 #define OR32_SPG_SIZE (1 << OR32_SPG_SIZE_BITS) #define OR32_SPG_SYS 0 #define OR32_SPG_DMMU 1 #define OR32_SPG_IMMU 2 #define OR32_SPG_DC 3 #define OR32_SPG_IC 4 #define OR32_SPG_MAC 5 #define OR32_SPG_DEBUG 6 #define OR32_SPG_PC 7 #define OR32_SPG_PM 8 #define OR32_SPG_PIC 9 #define OR32_SPG_TT 10 #define OR32_SPG_FPU 11 #define OR32_NUM_SPGS (OR32_SPG_FPU + 1) /* Special register group offsets */ #define OR32_SPG_SYS_VR 0 #define OR32_SPG_SYS_UPR 1 #define OR32_SPG_SYS_CPUCFGR 2 #define OR32_SPG_SYS_DMMUCFGR 3 #define OR32_SPG_SYS_IMMUCFGR 4 #define OR32_SPG_SYS_DCCFGR 5 #define OR32_SPG_SYS_ICCFGR 6 #define OR32_SPG_SYS_DCFGR 7 #define OR32_SPG_SYS_PCCFGR 8 #define OR32_SPG_SYS_NPC 16 #define OR32_SPG_SYS_SR 17 #define OR32_SPG_SYS_PPC 18 #define OR32_SPG_SYS_FPCSR 20 #define OR32_SPG_SYS_EPCR 32 #define OR32_SPG_SYS_EPCR_END (OR32_SPG_SYS_EPCR + 15) #define OR32_SPG_SYS_EEAR 48 #define OR32_SPG_SYS_EEAR_END (OR32_SPG_SYS_EEAR + 15) #define OR32_SPG_SYS_ESR 64 #define OR32_SPG_SYS_ESR_END (OR32_SPG_SYS_ESR + 15) #define OR32_SPG_SYS_GPR 1024 #define OR32_SPG_SYS_GPR_END (OR32_SPG_SYS_GPR + OR32_MAX_GPR_REGS) #define OR32_SPG_SYS_LAST OR32_SPG_SYS_GPR_END #define OR32_SPG_DMMU_DMMUCR 0 #define OR32_SPG_DMMU_DMMUPR 1 #define OR32_SPG_DMMU_DTLBEIR 2 #define OR32_SPG_DMMU_DATBMR 4 #define OR32_SPG_DMMU_DATBMR_END (OR32_SPG_DMMU_DATBMR + 3) #define OR32_SPG_DMMU_DATBTR 8 #define OR32_SPG_DMMU_DATBTR_END (OR32_SPG_DMMU_DATBTR + 3) #define OR32_SPG_DMMU_DTLBW0MR 512 #define OR32_SPG_DMMU_DTLBW0MR_END (OR32_SPG_DMMU_DTLBW0MR + 127) #define OR32_SPG_DMMU_DTLBW0TR 640 #define OR32_SPG_DMMU_DTLBW0TR_END (OR32_SPG_DMMU_DTLBW0TR + 127) #define OR32_SPG_DMMU_DTLBW1MR 768 #define OR32_SPG_DMMU_DTLBW1MR_END (OR32_SPG_DMMU_DTLBW1MR + 127) #define OR32_SPG_DMMU_DTLBW1TR 896 #define OR32_SPG_DMMU_DTLBW1TR_END (OR32_SPG_DMMU_DTLBW1TR + 127) #define OR32_SPG_DMMU_DTLBW2MR 1024 #define OR32_SPG_DMMU_DTLBW2MR_END (OR32_SPG_DMMU_DTLBW2MR + 127) #define OR32_SPG_DMMU_DTLBW2TR 1152 #define OR32_SPG_DMMU_DTLBW2TR_END (OR32_SPG_DMMU_DTLBW2TR + 127) #define OR32_SPG_DMMU_DTLBW3MR 1280 #define OR32_SPG_DMMU_DTLBW3MR_END (OR32_SPG_DMMU_DTLBW3MR + 127) #define OR32_SPG_DMMU_DTLBW3TR 1408 #define OR32_SPG_DMMU_DTLBW3TR_END (OR32_SPG_DMMU_DTLBW3TR + 127) #define OR32_SPG_DMMU_LAST OR32_SPG_DMMU_DTLBW3TR_END #define OR32_SPG_IMMU_IMMUCR 0 #define OR32_SPG_IMMU_IMMUPR 1 #define OR32_SPG_IMMU_ITLBEIR 2 #define OR32_SPG_IMMU_IATBMR 4 #define OR32_SPG_IMMU_IATBMR_END (OR32_SPG_IMMU_IATBMR + 3) #define OR32_SPG_IMMU_IATBTR 8 #define OR32_SPG_IMMU_IATBTR_END (OR32_SPG_IMMU_IATBTR + 3) #define OR32_SPG_IMMU_ITLBW0MR 512 #define OR32_SPG_IMMU_ITLBW0MR_END (OR32_SPG_IMMU_ITLBW0MR + 127) #define OR32_SPG_IMMU_ITLBW0TR 640 #define OR32_SPG_IMMU_ITLBW0TR_END (OR32_SPG_IMMU_ITLBW0TR + 127) #define OR32_SPG_IMMU_ITLBW1MR 768 #define OR32_SPG_IMMU_ITLBW1MR_END (OR32_SPG_IMMU_ITLBW1MR + 127) #define OR32_SPG_IMMU_ITLBW1TR 896 #define OR32_SPG_IMMU_ITLBW1TR_END (OR32_SPG_IMMU_ITLBW1TR + 127) #define OR32_SPG_IMMU_ITLBW2MR 1024 #define OR32_SPG_IMMU_ITLBW2MR_END (OR32_SPG_IMMU_ITLBW2MR + 127) #define OR32_SPG_IMMU_ITLBW2TR 1152 #define OR32_SPG_IMMU_ITLBW2TR_END (OR32_SPG_IMMU_ITLBW2TR + 127) #define OR32_SPG_IMMU_ITLBW3MR 1280 #define OR32_SPG_IMMU_ITLBW3MR_END (OR32_SPG_IMMU_ITLBW3MR + 127) #define OR32_SPG_IMMU_ITLBW3TR 1408 #define OR32_SPG_IMMU_ITLBW3TR_END (OR32_SPG_IMMU_ITLBW3TR + 127) #define OR32_SPG_IMMU_LAST OR32_SPG_IMMU_ITLBW3TR_END #define OR32_SPG_DC_DCCR 0 #define OR32_SPG_DC_DCBPR 1 #define OR32_SPG_DC_DCBFR 2 #define OR32_SPG_DC_DCBIR 3 #define OR32_SPG_DC_DCBWR 4 #define OR32_SPG_DC_DCBLR 5 #define OR32_SPG_DC_LAST OR32_SPG_DC_DCBLR #define OR32_SPG_IC_ICCR 0 #define OR32_SPG_IC_ICBPR 1 #define OR32_SPG_IC_ICBIR 2 #define OR32_SPG_IC_ICBLR 3 #define OR32_SPG_IC_LAST OR32_SPG_IC_ICBLR #define OR32_SPG_MAC_MACLO 1 #define OR32_SPG_MAC_MACHI 2 #define OR32_SPG_MAC_LAST OR32_SPG_MAC_MACHI #define OR32_SPG_DEBUG_DVR 0 #define OR32_SPG_DEBUG_DVR_END (OR32_SPG_DEBUG_DVR + 7) #define OR32_SPG_DEBUG_DCR 8 #define OR32_SPG_DEBUG_DCR_END (OR32_SPG_DEBUG_DCR + 7) #define OR32_SPG_DEBUG_DMR1 16 #define OR32_SPG_DEBUG_DMR2 17 #define OR32_SPG_DEBUG_DCWR0 18 #define OR32_SPG_DEBUG_DCWR1 19 #define OR32_SPG_DEBUG_DSR 20 #define OR32_SPG_DEBUG_DRR 21 #define OR32_SPG_DEBUG_LAST OR32_SPG_DEBUG_DRR #define OR32_SPG_PC_PCCR 0 #define OR32_SPG_PC_PCCR_END (OR32_SPG_PC_PCCR + 7) #define OR32_SPG_PC_PCMR 8 #define OR32_SPG_PC_PCMR_END (OR32_SPG_PC_PCMR + 7) #define OR32_SPG_PC_LAST OR32_SPG_PC_PCMR_END #define OR32_SPG_PM_PMR 0 #define OR32_SPG_PM_LAST OR32_SPG_PM_PMR #define OR32_SPG_PIC_PICMR 0 #define OR32_SPG_PIC_PICSR 2 #define OR32_SPG_PIC_LAST OR32_SPG_PIC_PICSR #define OR32_SPG_TT_TTMR 0 #define OR32_SPG_TT_TTCR 1 #define OR32_SPG_TT_LAST OR32_SPG_TT_TTCR #define OR32_SPG_FPU_LAST -1 /* Define absolute SPR values from group and index */ #define OR32_SPR(group, index) (((group) << OR32_SPG_SIZE_BITS) + (index)) /* System group registers */ #define OR32_VR_SPRNUM OR32_SPR (OR32_SPG_SYS, OR32_SPG_SYS_VR) #define OR32_UPR_SPRNUM OR32_SPR (OR32_SPG_SYS, OR32_SPG_SYS_UPR) #define OR32_CPUCFGR_SPRNUM OR32_SPR (OR32_SPG_SYS, OR32_SPG_SYS_CPUCFGR) #define OR32_DCFGR_SPRNUM OR32_SPR (OR32_SPG_SYS, OR32_SPG_SYS_DCFGR) #define OR32_NPC_SPRNUM OR32_SPR (OR32_SPG_SYS, OR32_SPG_SYS_NPC) #define OR32_SR_SPRNUM OR32_SPR (OR32_SPG_SYS, OR32_SPG_SYS_SR) #define OR32_PPC_SPRNUM OR32_SPR (OR32_SPG_SYS, OR32_SPG_SYS_PPC) #define OR32_EPCR_SPRNUM OR32_SPR (OR32_SPG_SYS, OR32_SPG_SYS_EPCR) /* Debug group registers */ #define OR32_DVR0_SPRNUM OR32_SPR (OR32_SPG_DEBUG, OR32_SPG_DEBUG_DVR) #define OR32_DCR0_SPRNUM OR32_SPR (OR32_SPG_DEBUG, OR32_SPG_DEBUG_DCR) #define OR32_DMR1_SPRNUM OR32_SPR (OR32_SPG_DEBUG, OR32_SPG_DEBUG_DMR1) #define OR32_DMR2_SPRNUM OR32_SPR (OR32_SPG_DEBUG, OR32_SPG_DEBUG_DMR2) #define OR32_DCWR0_SPRNUM OR32_SPR (OR32_SPG_DEBUG, OR32_SPG_DEBUG_DCWR0) #define OR32_DCWR1_SPRNUM OR32_SPR (OR32_SPG_DEBUG, OR32_SPG_DEBUG_DCWR0) #define OR32_DSR_SPRNUM OR32_SPR (OR32_SPG_DEBUG, OR32_SPG_DEBUG_DSR) #define OR32_DRR_SPRNUM OR32_SPR (OR32_SPG_DEBUG, OR32_SPG_DEBUG_DRR) /* General Purpose Registers */ #define OR32_ZERO_REGNUM 0 #define OR32_SP_REGNUM 1 #define OR32_FP_REGNUM 2 #define OR32_FIRST_ARG_REGNUM 3 #define OR32_LAST_ARG_REGNUM 8 #define OR32_LR_REGNUM 9 #define OR32_FIRST_SAVED_REGNUM 10 #define OR32_RV_REGNUM 11 #define OR32_PPC_REGNUM (OR32_MAX_GPR_REGS + 0) #define OR32_NPC_REGNUM (OR32_MAX_GPR_REGS + 1) #define OR32_SR_REGNUM (OR32_MAX_GPR_REGS + 2) /* Defines for Debug Control Register bits */ #define OR32_DCR_DP 0x0000001 /* DVR/DCR Present */ #define OR32_DCR_CC 0x000000e /* Compare condition */ #define OR32_DCR_CC_OFF 1 /* Compare condition offset */ #define OR32_DCR_SC 0x0000010 /* Signed compare */ #define OR32_DCR_CT 0x00000e0 /* Compare type */ #define OR32_DCR_CT_OFF 5 /* Compare type offset */ /* Defines for Debug Mode Register 1 bits. */ #define OR32_DMR1_CW 0x00000003 /* Mask for CW bits */ #define OR32_DMR1_CW_AND 0x00000001 /* Chain watchpoint 0 AND */ #define OR32_DMR1_CW_OR 0x00000002 /* Chain watchpoint 0 OR */ #define OR32_DMR1_CW_SZ 2 /* Number of bits for each WP */ #define OR32_DMR1_ST 0x00400000 /* Single-step trace */ #define OR32_DMR1_BT 0x00800000 /* Branch trace */ /* Defines for Debug Mode Register 2 bits. */ #define OR32_DMR2_WCE0 0x00000001 /* Watchpoint counter enable 0 */ #define OR32_DMR2_WCE1 0x00000002 /* Watchpoint counter enable 1 */ #define OR32_DMR2_AWTC_MASK 0x00000ffc /* Assign watchpoints to ctr mask */ #define OR32_DMR2_WGB_MASK 0x003ff000 /* Watchpoints generaing brk mask */ #define OR32_DMR2_WBS_MASK 0xffc00000 /* Watchpoint brkpt status mask */ #define OR32_DMR2_AWTC_OFF 2 /* Assign watchpoints to ctr offset */ #define OR32_DMR2_WGB_OFF 12 /* Watchpoints generating brk offset */ #define OR32_DMR2_WBS_OFF 22 /* Watchpoint brkpt status offset */ /* Defines for Debug Stop Register. */ #define OR32_DSR_RSTE 0x00000001 /* Reset exception */ #define OR32_DSR_BUSEE 0x00000002 /* Bus error exception */ #define OR32_DSR_DPFE 0x00000004 /* Data page fault exception */ #define OR32_DSR_IPFE 0x00000008 /* Instrution page fault exception */ #define OR32_DSR_TTE 0x00000010 /* Tick timer exception */ #define OR32_DSR_AE 0x00000020 /* Alignment exception */ #define OR32_DSR_IIE 0x00000040 /* Illegal instruction exception */ #define OR32_DSR_INTE 0x00000080 /* Interrupt exception */ #define OR32_DSR_DME 0x00000100 /* DTLB miss exception */ #define OR32_DSR_IME 0x00000200 /* ITLB miss exception */ #define OR32_DSR_RE 0x00000400 /* Range exception */ #define OR32_DSR_SCE 0x00000800 /* System call exception */ #define OR32_DSR_FPE 0x00001000 /* Floating point exception */ #define OR32_DSR_TE 0x00002000 /* Trap exception */ /* Defines for Debug Reason Register bits */ #define OR32_DRR_RSTE 0x00000001 /* Reset exception */ #define OR32_DRR_BUSEE 0x00000002 /* Bus error exception */ #define OR32_DRR_DPFE 0x00000004 /* Data page fault exception */ #define OR32_DRR_IPFE 0x00000008 /* Instrution page fault exception */ #define OR32_DRR_TTE 0x00000010 /* Tick timer exception */ #define OR32_DRR_AE 0x00000020 /* Alignment exception */ #define OR32_DRR_IIE 0x00000040 /* Illegal instruction exception */ #define OR32_DRR_INTE 0x00000080 /* Interrupt exception */ #define OR32_DRR_DME 0x00000100 /* DTLB miss exception */ #define OR32_DRR_IME 0x00000200 /* ITLB miss exception */ #define OR32_DRR_RE 0x00000400 /* Range exception */ #define OR32_DRR_SCE 0x00000800 /* System call exception */ #define OR32_DRR_FPE 0x00001000 /* Floating point exception */ #define OR32_DRR_TE 0x00002000 /* Trap exception */ /* Bit definitions for the Unit Present Register */ #define OR32_SPR_UPR_UP 0x00000001 /* UPR present */ #define OR32_SPR_UPR_DCP 0x00000002 /* Data cache present */ #define OR32_SPR_UPR_ICP 0x00000004 /* Instruction cache present */ #define OR32_SPR_UPR_DMP 0x00000008 /* Data MMU present */ #define OR32_SPR_UPR_IMP 0x00000010 /* Instruction MMU present */ #define OR32_SPR_UPR_MP 0x00000020 /* MAC present */ #define OR32_SPR_UPR_DUP 0x00000040 /* Debug unit present */ #define OR32_SPR_UPR_PCUP 0x00000080 /* Perf counters unit present */ #define OR32_SPR_UPR_PMP 0x00000100 /* Power management present */ #define OR32_SPR_UPR_PICP 0x00000200 /* PIC present */ #define OR32_SPR_UPR_TTP 0x00000400 /* Tick timer present */ /* Bit definitions for the CPU Configuration Register */ #define OR32_SPR_CPUCFGR_NSGF 0x0000000f /* Number of shadow GPR files */ #define OR32_SPR_CPUCFGR_CGF 0x00000010 /* Custom GPR file */ #define OR32_SPR_CPUCFGR_OB32S 0x00000020 /* ORBIS32 supported */ #define OR32_SPR_CPUCFGR_OB64S 0x00000040 /* ORBIS64 supported */ #define OR32_SPR_CPUCFGR_OF32S 0x00000080 /* ORFPX32 supported */ #define OR32_SPR_CPUCFGR_OF64S 0x00000100 /* ORFPX64 supported */ #define OR32_SPR_CPUCFGR_OV64S 0x00000400 /* ORVDX64 supported */ /* Bit definitions for the Debug configuration register */ #define OR32_SPR_DCFGR_NDP 0x00000007 /* Number of matchpoints */ #define OR32_SPR_DCFGR_WPCI 0x00000008 /* Watchpoint ctrs implemented */ /* Properties of the architecture. GDB mapping of registers is all the GPRs followed by the PPC, NPC and SR at the end. Red zone is the area past the end of the stack reserved for exception handlers etc. */ #define OR32_MAX_GPR_REGS 32 #define OR32_NUM_PSEUDO_REGS 0 #define OR32_NUM_REGS (OR32_MAX_GPR_REGS + 3) #define OR32_TOTAL_NUM_REGS (OR32_NUM_REGS + OR32_NUM_PSEUDO_REGS) #define OR32_MAX_MATCHPOINTS 8 #define OR32_MAX_HW_WATCHES OR32_MAX_MATCHPOINTS #define OR32_STACK_ALIGN 4 #define OR32_INSTLEN 4 #define OR32_INSTBITLEN (OR32_INSTLEN * 8) #define OR32_NUM_TAP_RECORDS 8 #define OR32_FRAME_RED_ZONE_SIZE 2536 /* OR32 exception vectors */ #define OR32_RESET_VECTOR 0x100 #define OR32_BUSERR_VECTOR 0x200 #define OR32_DPF_VECTOR 0x300 #define OR32_IPF_VECTOR 0x400 #define OR32_TT_VECTOR 0x500 #define OR32_ALIGN_VECTOR 0x600 #define OR32_ILL_VECTOR 0x700 #define OR32_EXT_VECTOR 0x800 #define OR32_DTLB_VECTOR 0x900 #define OR32_ITLB_VECTOR 0xa00 #define OR32_RANGE_VECTOR 0xb00 #define OR32_SYS_VECTOR 0xc00 #define OR32_FP_VECTOR 0xd00 #define OR32_TRAP_VECTOR 0xe00 /* Constants and macros to break out instruction fields. I'd expect these in the assembler header, but they aren't there (for now). */ #define OR32_SEXT16(v) (((v) & 0x00008000) ? ((v) - 0x00010000) : (v)) #define OR32_SEXT26(v) (((v) & 0x02000000) ? ((v) - 0x04000000) : (v)) #define OR32_OPCODE1(i) (((i) & 0xfc000000) >> 26) #define OR32_OPCODE2(i) ((((i) & 0xfc000000) >> 20) | \ (((i) & 0x00000300) >> 6) | \ ((i) & 0x0000000f)) #define OR32_OPCODE3(i) ((((i) & 0xfc000000) >> 24) | \ (((i) & 0x000000c0) >> 6)) #define OR32_OPCODE4(i) ((((i) & 0xfc000000) >> 18) | \ (((i) & 0x000003c0) >> 2) | \ ((i) & 0x0000000f)) #define OR32_OPCODE5(i) (((i) & 0xffff0000) >> 16) #define OR32_OPCODE6(i) (((i) & 0xff000000) >> 24) #define OR32_OPCODE7(i) (((i) & 0xfc000000) >> 21) #define OR32_D_REG(i) (((i) & 0x03e00000) >> 21) #define OR32_A_REG(i) (((i) & 0x001f0000) >> 16) #define OR32_B_REG(i) (((i) & 0x0000f800) >> 11) #define OR32_IMM(i) (OR32_SEXT16((i) & 0x0000ffff)) #define OR32_IMM2(i) (OR32_SEXT16((((i) & 0x03e00000) >> 10) | \ ((i) & 0x000003ff))) #define OR32_OFFSET(i) (OR32_SEXT26((i) & 0x03ffffff) )) #define OR32_SHIFT(i) ((i) & 0x0000003f) /* The instruction opcodes */ #define OR32_OP_ADD 0xe00 /* Type 2 */ #define OR32_OP_ADDC 0xe01 /* Type 2 */ #define OR32_OP_ADDI 0x27 /* Type 1 */ #define OR32_OP_AND 0xe03 /* Type 2 */ #define OR32_OP_ANDI 0x29 /* Type 1 */ #define OR32_OP_BF 0x04 /* Type 1 */ #define OR32_OP_BNF 0x03 /* Type 1 */ #define OR32_OP_TRAP 0x2100 /* Type 5 */ #define OR32_OP_J 0x00 /* Type 1 */ #define OR32_OP_JAL 0x01 /* Type 1 */ #define OR32_OP_JALR 0x12 /* Type 1 */ #define OR32_OP_JR 0x11 /* Type 1 */ #define OR32_OP_LBS 0x24 /* Type 1 */ #define OR32_OP_LBZ 0x23 /* Type 1 */ #define OR32_OP_LHS 0x26 /* Type 1 */ #define OR32_OP_LHZ 0x25 /* Type 1 */ #define OR32_OP_LWS 0x22 /* Type 1 */ #define OR32_OP_LWZ 0x21 /* Type 1 */ #define OR32_OP_MFSPR 0x07 /* Type 1 */ #define OR32_OP_MOVHI 0x06 /* Type 1 */ #define OR32_OP_MTSPR 0x10 /* Type 1 */ #define OR32_OP_MUL 0xe36 /* Type 2 */ #define OR32_OP_MULI 0x2c /* Type 1 */ #define OR32_OP_MULU 0xe3b /* Type 2 */ #define OR32_OP_NOP 0x15 /* Type 6 */ #define OR32_OP_OR 0xe04 /* Type 2 */ #define OR32_OP_ORI 0x2a /* Type 1 */ #define OR32_OP_RFE 0x09 /* Type 1 */ #define OR32_OP_RORI 0xe3 /* Type 3 */ #define OR32_OP_SB 0x36 /* Type 1 */ #define OR32_OP_SFEQ 0x720 /* Type 7 */ #define OR32_OP_SFGES 0x72b /* Type 7 */ #define OR32_OP_SFGEU 0x723 /* Type 7 */ #define OR32_OP_SFGTS 0x72a /* Type 7 */ #define OR32_OP_SFGTU 0x722 /* Type 7 */ #define OR32_OP_SFLES 0x72d /* Type 7 */ #define OR32_OP_SFLEU 0x725 /* Type 7 */ #define OR32_OP_SFLTS 0x72c /* Type 7 */ #define OR32_OP_SFLTU 0x724 /* Type 7 */ #define OR32_OP_SFNE 0x721 /* Type 7 */ #define OR32_OP_SLL 0x3808 /* Type 4 */ #define OR32_OP_SLLI 0xe0 /* Type 3 */ #define OR32_OP_SRA 0x3828 /* Type 4 */ #define OR32_OP_SRAI 0xe2 /* Type 3 */ #define OR32_OP_SRL 0x3818 /* Type 4 */ #define OR32_OP_SRLI 0xe1 /* Type 3 */ #define OR32_OP_SUB 0xe02 /* Type 2 */ #define OR32_OP_SW 0x35 /* Type 1 */ #define OR32_OP_SYS 0x2000 /* Type 5 */ #define OR32_OP_XOR 0xe05 /* Type 2 */ #define OR32_OP_XORI 0x2b /* Type 1 */ /*! OR32 specific per-architecture information. Replaces struct_or32_implementation. A lot of this info comes from the config regs, so cannot be put in place until we have the actual target. Up until then we have reasonable defaults. */ struct gdbarch_tdep { unsigned int num_matchpoints; /* Total matchpoints available. */ unsigned int num_gpr_regs; /* Number of general registers. */ int bytes_per_word; int bytes_per_address; }; /* Global disassembly instructions */ extern int print_insn_big_or32 (bfd_vma memaddr, struct disassemble_info *info); extern int print_insn_little_or32 (bfd_vma memaddr, struct disassemble_info *info); #endif /* OR32_TDEP__H */
Go to most recent revision | Compare with Previous | Blame | View Log