OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-7.1/] [gdb/] [testsuite/] [gdb.mi/] [mi-break.exp] - Rev 227

Compare with Previous | Blame | View Log

# Copyright 1999, 2001, 2004, 2006, 2007, 2008, 2009, 2010
# Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

#
# Test essential Machine interface (MI) operations
#
# Verify that, using the MI, we can run a simple program and perform basic
# debugging activities like: insert breakpoints, run the program,
# step, next, continue until it ends and, last but not least, quit.
#
# The goal is not to test gdb functionality, which is done by other tests,
# but to verify the correct output response to MI operations.
#

load_lib mi-support.exp
set MIFLAGS "-i=mi"

gdb_exit
if [mi_gdb_start] {
    continue
}

set testfile "basics"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/mi-break
if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } {
     untested mi-break.exp
     return -1
}

mi_delete_breakpoints
mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}

# Locate line numbers in basics.c.
set line_callee4_head  [gdb_get_line_number "callee4 ("]
set line_callee4_body  [expr $line_callee4_head + 2]
set line_callee3_head  [gdb_get_line_number "callee3 ("]
set line_callee3_body  [expr $line_callee3_head + 2]
set line_callee2_head  [gdb_get_line_number "callee2 ("]
set line_callee2_body  [expr $line_callee2_head + 2]
set line_callee1_head  [gdb_get_line_number "callee1 ("]
set line_callee1_body  [expr $line_callee1_head + 2]
set line_main_head     [gdb_get_line_number "main ("]
set line_main_body     [expr $line_main_head + 2]
set line_callme_head   [gdb_get_line_number "callme ("]
set line_callme_body   [expr $line_callme_head + 2]

set fullname "fullname=\"${fullname_syntax}${srcfile}\""

proc test_tbreak_creation_and_listing {} {
    global mi_gdb_prompt
    global srcfile
    global hex
    global line_callee4_head line_callee4_body
    global line_callee3_head line_callee3_body
    global line_callee2_head line_callee2_body
    global line_callee1_head line_callee1_body
    global line_main_head    line_main_body
    global fullname

    # Insert some breakpoints and list them
    # Also, disable some so they do not interfere with other tests
    # Tests:
    # -break-insert -t main
    # -break-insert -t basics.c:callee2
    # -break-insert -t basics.c:$line_callee3_head
    # -break-insert -t srcfile:$line_callee4_head
    # -break-list

    mi_create_breakpoint "-t main" 1 del main ".*basics.c" $line_main_body $hex \
             "break-insert -t operation"

    mi_create_breakpoint "-t basics.c:callee2" 2 del callee2 ".*basics.c" $line_callee2_body $hex \
             "insert temp breakpoint at basics.c:callee2"

    mi_create_breakpoint "-t basics.c:$line_callee3_head" 3 del callee3 ".*basics.c" $line_callee3_head $hex \
             "insert temp breakpoint at basics.c:\$line_callee3_head"

    # Getting the quoting right is tricky.  That is "\"<file>\":$line_callee4_head"
    mi_create_breakpoint "-t \"\\\"${srcfile}\\\":$line_callee4_head\"" 4 del callee4 ".*basics.c" $line_callee4_head $hex \
             "insert temp breakpoint at \"<fullfilename>\":\$line_callee4_head"

    mi_gdb_test "666-break-list" \
            "666\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"del\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",${fullname},line=\"$line_main_body\",times=\"0\",original-location=\".*\"\}.*\\\]\}" \
                "list of breakpoints"

    mi_gdb_test "777-break-delete" \
            "777\\^done" \
            "delete temp breakpoints"
}

proc test_rbreak_creation_and_listing {} {
    global mi_gdb_prompt
    global srcfile
    global hex
    global line_callee4_head line_callee4_body
    global line_callee3_head line_callee3_body
    global line_callee2_head line_callee2_body
    global line_callee1_head line_callee1_body
    global line_main_head    line_main_body

    # Insert some breakpoints and list them
    # Also, disable some so they do not interfere with other tests
    # Tests:
    # -break-insert -r main
    # -break-insert -r callee2
    # -break-insert -r callee
    # -break-insert -r .*llee
    # -break-list

    setup_xfail "*-*-*"
    mi_gdb_test "122-break-insert -r main" \
             "122\\^done,bkpt=\{number=\"5\",addr=\"$hex\",file=\".*basics.c\",line=\"$line_main_body\"\}" \
             "break-insert -r operation"

    setup_xfail "*-*-*"
    mi_gdb_test "133-break-insert -r callee2" \
             "133\\^done,bkpt=\{number=\"6\",addr=\"$hex\",file=\".*basics.c\",line=\"$line_callee2_body\"\}" \
             "insert breakpoint with regexp callee2"

    setup_xfail "*-*-*"
    mi_gdb_test "144-break-insert -r callee" \
            "144\\^done,bkpt=\{number=\"7\",addr=\"$hex\",file=\".*basics.c\",line=\"$line_callee1_body\"\},bkpt=\{number=\"8\",addr=\"$hex\",file=\".*basics.c\",line=\"$line_callee2_body\"\},bkpt=\{number=\"9\",addr=\"$hex\",file=\".*basics.c\",line=\"$line_callee3_body\"\},bkpt=\{number=\"10\",addr=\"$hex\",file=\".*basics.c\",line=\"$line_callee4_body\"\}" \
             "insert breakpoint with regexp callee"

    setup_xfail "*-*-*"
    mi_gdb_test "155-break-insert -r \.\*llee" \
            "155\\^done,bkpt=\{number=\"11\",addr=\"$hex\",file=\".*basics.c\",line=\"$line_callee1_body\"\},bkpt=\{number=\"12\",addr=\"$hex\",file=\".*basics.c\",line=\"$line_callee2_body\"\},bkpt=\{number=\"13\",addr=\"$hex\",file=\".*basics.c\",line=\"$line_callee3_body\"\},bkpt=\{number=\"14\",addr=\"$hex\",file=\".*basics.c\",line=\"$line_callee4_body\"\}" \
             "insert breakpoint with regexp .*llee"

    setup_xfail "*-*-*"
    mi_gdb_test "166-break-list" \
            "1\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[bkpt=\{number=\"5\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"$line_main_body\",times=\"0\"\},.*\}\\\]\}" \
                "list of breakpoints"

    mi_gdb_test "177-break-delete" \
            "177\\^done" \
            "delete temp breakpoints"
}

proc test_ignore_count {} {
    global mi_gdb_prompt
    global line_callme_body

    mi_gdb_test "-break-insert -i 1 callme" \
        "\\^done.*ignore=\"1\".*" \
        "insert breakpoint with ignore count at callme"

    mi_run_cmd

    mi_expect_stop "breakpoint-hit" "callme" "\{name=\"i\",value=\"2\"\}" ".*basics.c" $line_callme_body \
        {"" "disp=\"keep\"" } "run to breakpoint with ignore count"
}

proc test_error {} {
    global mi_gdb_prompt

    mi_gdb_test "-break-insert function_that_does_not_exist" \
        ".*\\^error,msg=\"Function \\\\\"function_that_does_not_exist\\\\\" not defined.\"" \
        "breakpoint at nonexistent function"

    # We used to have a bug whereby -break-insert that failed would not
    # clear some event hooks.  As result, whenever we evaluate expression
    # containing function call, the internal breakpoint created to handle
    # function call would be reported, messing up MI output.
    mi_gdb_test "-var-create V * return_1()" \
        "\\^done,name=\"V\",numchild=\"0\",value=\"1\",type=\"int\",has_more=\"0\"" \
        "create varobj for function call"

    mi_gdb_test "-var-update *" \
        "\\^done,changelist=\\\[\\\]" \
        "update varobj for function call"    
}

proc test_disabled_creation {} {
    global mi_gdb_prompt
    global hex
    global line_callee2_body

    mi_gdb_test "-break-insert -d basics.c:callee2" \
        "\\^done,bkpt=\{number=\"6\",type=\"breakpoint\",disp=\"keep\",enabled=\"n\",addr=\"$hex\",func=\"callee2\",file=\".*basics.c\",fullname=\".*\",line=\"$line_callee2_body\",times=\"0\",original-location=\".*\"\}" \
        "test disabled creation"

    mi_gdb_test "-break-delete" \
            "\\^done" \
            "test disabled creation: cleanup"
}

proc test_breakpoint_commands {} {
    global line_callee2_body
    global hex
    global fullname

    mi_create_breakpoint "basics.c:callee2" 7 keep callee2 ".*basics.c" $line_callee2_body $hex \
             "breakpoint commands: insert breakpoint at basics.c:callee2"

    mi_gdb_test "-break-commands 7 \"print 10\" \"continue\"" \
        "\\^done" \
        "breakpoint commands: set commands"

    mi_gdb_test "-break-info 7" \
        "\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[bkpt=\{number=\"7\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"callee2\",file=\".*basics.c\",${fullname},line=\"$line_callee2_body\",times=\"0\",script=\{\"print 10\",\"continue\"\},original-location=\".*\"\}.*\\\]\}" \
        "breakpoint commands: check that commands are set"

    mi_gdb_test "-break-commands 7" \
        "\\^done" \
        "breakpoint commands: clear commands"

    mi_list_breakpoints [list [list 7 "keep" "callee2" "basics.c" "$line_callee2_body" $hex]] \
        "breakpoint commands: check that commands are cleared"

    mi_run_to_main

    mi_create_breakpoint "basics.c:callee2" 9 keep callee2 ".*basics.c" $line_callee2_body $hex \
             "breakpoint commands: insert breakpoint at basics.c:callee2, again"

    mi_gdb_test "-break-commands 9 \"set \$i=0\" \"while \$i<10\" \"print \$i\" \"set \$i=\$i+1\" \"end\" \"continue\" " \
        "\\^done" \
        "breakpoint commands: set commands"

    mi_send_resuming_command "exec-continue" "test hitting breakpoint with commands"
    mi_gdb_test "" \
        ".*\\\$1 = 0.*\\\$10 = 9.*\\*running.*\\*stopped,reason=\"exited-normally\".*" \
        "test hitting breakpoint with commands"
}

test_tbreak_creation_and_listing
test_rbreak_creation_and_listing

test_ignore_count

test_error

test_disabled_creation

test_breakpoint_commands

mi_gdb_exit
return 0

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.