URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [gdb-7.1/] [sim/] [testsuite/] [sim/] [h8300/] [band.s] - Rev 246
Go to most recent revision | Compare with Previous | Blame | View Log
# Hitachi H8 testcase 'band', 'bor', 'bxor', 'bld', 'bst', 'bstz' # mach(): all # as(h8300): --defsym sim_cpu=0 # as(h8300h): --defsym sim_cpu=1 # as(h8300s): --defsym sim_cpu=2 # as(h8sx): --defsym sim_cpu=3 # ld(h8300h): -m h8300helf # ld(h8300s): -m h8300self # ld(h8sx): -m h8300sxelf .include "testutils.inc" .data byte_src: .byte 0xa5 byte_dst: .byte 0 start band_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; band xx:3, reg8 band #7, r0l ; this should NOT set the carry flag. test_cc_clear band #6, r0l ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag band #7, r0l ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear band #6, r0l ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. band_imm3_ind: set_grs_a5a5 .if (sim_cpu == h8300) mov #byte_src, r1 set_ccr_zero ;; band xx:3, ind band #7, @r1 ; this should NOT set the carry flag. test_cc_clear band #6, @r1 ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag band #7, @r1 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear band #6, @r1 ; this should clear the carry flag test_cc_clear ;;; test_h_gr16 byte_src r1 ;FIXME .else mov #byte_src, er1 set_ccr_zero ;; band xx:3, ind band #7, @er1 ; this should NOT set the carry flag. test_cc_clear band #6, @er1 ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag band #7, @er1 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear band #6, @er1 ; this should clear the carry flag test_cc_clear test_h_gr32 byte_src er1 .endif ; h8300 test_gr_a5a5 0 ; general registers should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 band_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; band xx:3, aa:8 band #7, @0x20:8 ; this should NOT set the carry flag. test_cc_clear band #6, @0x20:8 ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag band #7, @0x20:8 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear band #6, @0x20:8 ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. .if (sim_cpu > h8300h) band_imm3_abs16: set_grs_a5a5 set_ccr_zero ;; band xx:3, aa:16 band #7, @byte_src:16 ; this should NOT set the carry flag. test_cc_clear band #6, @byte_src:16 ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag band #7, @byte_src:16 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear band #6, @byte_src:16 ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. band_imm3_abs32: set_grs_a5a5 set_ccr_zero ;; band xx:3, aa:32 band #7, @byte_src:32 ; this should NOT set the carry flag. test_cc_clear band #6, @byte_src:32 ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag band #7, @byte_src:32 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear band #6, @byte_src:32 ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. .endif bor_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; bor xx:3, reg8 bor #6, r0l ; this should NOT set the carry flag. test_cc_clear bor #7, r0l ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear orc #1, ccr ; set the carry flag bor #7, r0l ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear bor #6, r0l ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. bor_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bor xx:3, aa:8 bor #6, @0x20:8 ; this should NOT set the carry flag. test_cc_clear bor #7, @0x20:8 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear orc #1, ccr ; set the carry flag bor #7, @0x20:8 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear bor #6, @0x20:8 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. bxor_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; bxor xx:3, reg8 bxor #6, r0l ; this should NOT set the carry flag. test_cc_clear bxor #7, r0l ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear orc #1, ccr ; set the carry flag bxor #6, r0l ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear bxor #7, r0l ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. bxor_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bxor xx:3, aa:8 bxor #6, @0x20:8 ; this should NOT set the carry flag. test_cc_clear bxor #7, @0x20:8 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear orc #1, ccr ; set the carry flag bxor #6, @0x20:8 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear bxor #7, @0x20:8 ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. bld_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; bld xx:3, reg8 bld #6, r0l ; this should NOT set the carry flag. test_cc_clear bld #7, r0l ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. bld_imm3_ind: set_grs_a5a5 .if (sim_cpu == h8300) mov #byte_src, r1 set_ccr_zero ;; bld xx:3, ind bld #6, @r1 ; this should NOT set the carry flag. test_cc_clear bld #7, @r1 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear ;;; test_h_gr16 byte_src r1 ;FIXME .else mov #byte_src, er1 set_ccr_zero ;; bld xx:3, ind bld #6, @er1 ; this should NOT set the carry flag. test_cc_clear bld #7, @er1 ; this should NOT set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_h_gr32 byte_src er1 .endif ; h8300 test_gr_a5a5 0 ; general registers should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 bld_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bld xx:3, aa:8 bld #6, @0x20:8 ; this should NOT set the carry flag. test_cc_clear bld #7, @0x20:8 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. .if (sim_cpu > h8300h) bld_imm3_abs16: set_grs_a5a5 set_ccr_zero ;; bld xx:3, aa:16 bld #6, @byte_src:16 ; this should NOT set the carry flag. test_cc_clear bld #7, @byte_src:16 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. bld_imm3_abs32: set_grs_a5a5 set_ccr_zero ;; bld xx:3, aa:32 bld #6, @byte_src:32 ; this should NOT set the carry flag. test_cc_clear bld #7, @byte_src:32 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. .endif bst_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; bst xx:3, reg8 bst #7, r0l ; this should clear bit 7 test_cc_clear test_h_gr16 0xa525 r0 set_ccr_zero orc #1, ccr ; set the carry flag bst #6, r0l ; this should set bit 6 test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_h_gr16 0xa565 r0 test_gr_a5a5 1 ; Rest of general regs should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 bst_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bst xx:3, aa:8 bst #7, @0x20:8 ; this should clear bit 7 test_cc_clear mov.b @0x20, r0l test_h_gr16 0xa525 r0 set_ccr_zero orc #1, ccr ; set the carry flag bst #6, @0x20:8 ; this should set bit 6 test_carry_set test_ovf_clear test_neg_clear test_zero_clear mov.b @0x20, r0l test_h_gr16 0xa565 r0 test_gr_a5a5 1 ; general registers should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 .if (sim_cpu == h8sx) bstz_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bstz xx:3, aa:8 bstz #7, @0x20:8 ; this should clear bit 7 test_cc_clear mov.b @0x20, r0l test_h_gr16 0xa525 r0 set_ccr_zero orc #4, ccr ; set the zero flag bstz #6, @0x20:8 ; this should set bit 6 test_carry_clear test_ovf_clear test_neg_clear test_zero_set mov.b @0x20, r0l test_h_gr16 0xa565 r0 test_gr_a5a5 1 ; general registers should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 .endif ; h8sx btst_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; btst xx:3, reg8 btst #7, r0l ; this should NOT set the zero flag. test_cc_clear btst #6, r0l ; this should set the zero flag. test_carry_clear test_ovf_clear test_neg_clear test_zero_set test_grs_a5a5 ; general registers should not be changed. btst_imm3_ind: set_grs_a5a5 .if (sim_cpu == h8300) mov #byte_src, r1 set_ccr_zero ;; btst xx:3, ind btst #7, @r1 ; this should NOT set the zero flag. test_cc_clear btst #6, @r1 ; this should set the zero flag. test_carry_clear test_ovf_clear test_neg_clear test_zero_set ;;; test_h_gr16 byte_src r1 ;FIXME .else mov #byte_src, er1 set_ccr_zero ;; btst xx:3, ind btst #7, @er1 ; this should NOT set the zero flag. test_cc_clear btst #6, @er1 ; this should NOT set the zero flag. test_carry_clear test_ovf_clear test_neg_clear test_zero_set test_h_gr32 byte_src er1 .endif ; h8300 test_gr_a5a5 0 ; general registers should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 btst_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; btst xx:3, aa:8 btst #7, @0x20:8 ; this should NOT set the zero flag. test_cc_clear btst #6, @0x20:8 ; this should set the zero flag. test_carry_clear test_ovf_clear test_neg_clear test_zero_set test_grs_a5a5 ; general registers should not be changed. .if (sim_cpu > h8300h) btst_imm3_abs16: set_grs_a5a5 set_ccr_zero ;; btst xx:3, aa:16 btst #7, @byte_src:16 ; this should NOT set the zero flag. test_cc_clear btst #6, @byte_src:16 ; this should set the zero flag. test_carry_clear test_ovf_clear test_neg_clear test_zero_set test_grs_a5a5 ; general registers should not be changed. btst_imm3_abs32: set_grs_a5a5 set_ccr_zero ;; btst xx:3, aa:32 btst #7, @byte_src:32 ; this should NOT set the zero flag. test_cc_clear btst #6, @byte_src:32 ; this should set the zero flag. test_carry_clear test_ovf_clear test_neg_clear test_zero_set test_grs_a5a5 ; general registers should not be changed. .endif pass exit 0
Go to most recent revision | Compare with Previous | Blame | View Log