URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [gdb-7.2/] [gdb/] [testsuite/] [gdb.base/] [recurse.exp] - Rev 357
Go to most recent revision | Compare with Previous | Blame | View Log
# Copyright 1992, 1994, 1995, 1996, 1997, 1999, 2000, 2007, 2008, 2009, 2010
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Jeff Law. (law@cs.utah.edu)
if $tracelevel then {
strace $tracelevel
}
set testfile "recurse"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
untested recurse.exp
return -1
}
# Start with a fresh gdb.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
proc recurse_tests {} {
# Disable hardware watchpoints if necessary.
if [target_info exists gdb,no_hardware_watchpoints] {
gdb_test_no_output "set can-use-hw-watchpoints 0" ""
}
if [runto recurse] then {
# First we need to step over the assignment of b, so it has a known
# value.
gdb_test "next" "if \\(a == 1\\)" "next over b = 0 in first instance"
gdb_test "watch b" ".*\[Ww\]atchpoint \[0-9]*: b" \
"set first instance watchpoint"
# Continue until initial set of b.
if [gdb_test "continue" \
"Continuing.*\[Ww\]atchpoint.*: b.*Old value = 0.*New value = 10.*" \
"continue to first instance watchpoint, first time"] then {
gdb_suppress_tests;
}
# Continue inward for a few iterations
gdb_test "continue" "Breakpoint.* recurse \\(a=9\\).*" \
"continue to recurse (a = 9)"
gdb_test "continue" "Breakpoint.* recurse \\(a=8\\).*" \
"continue to recurse (a = 8)"
gdb_test "continue" "Breakpoint.* recurse \\(a=7\\).*" \
"continue to recurse (a = 7)"
gdb_test "continue" "Breakpoint.* recurse \\(a=6\\).*" \
"continue to recurse (a = 6)"
gdb_test "continue" "Breakpoint.* recurse \\(a=5\\).*" \
"continue to recurse (a = 5)"
# Put a watchpoint on another instance of b
# First we need to step over the assignment of b, so it has a known
# value.
gdb_test "next" "if \\(a == 1\\)" "next over b = 0 in second instance"
gdb_test "watch b" ".*\[Ww\]atchpoint \[0-9]*: b" \
"set second instance watchpoint"
# Continue until initial set of b (second instance).
if [gdb_test "continue" \
"Continuing.*\[Ww\]atchpoint.*: b.*Old value = 0.*New value = 5.*"\
"continue to second instance watchpoint, first time"] then {
gdb_suppress_tests;
}
# Continue inward for a few iterations
gdb_test "continue" "Breakpoint.* recurse \\(a=4\\).*" \
"continue to recurse (a = 4)"
gdb_test "continue" "Breakpoint.* recurse \\(a=3\\).*" \
"continue to recurse (a = 3)"
gdb_test "continue" "Breakpoint.* recurse \\(a=2\\).*" \
"continue to recurse (a = 2)"
gdb_test "continue" "Breakpoint.* recurse \\(a=1\\).*" \
"continue to recurse (a = 1)"
# Continue until second set of b (second instance).
if [gdb_test "continue" \
"Continuing.*\[Ww\]atchpoint.*: b.*Old value = 5.*New value = 120.*return.*" \
"continue to second instance watchpoint, second time"] then {
gdb_suppress_tests;
}
# Continue again. We should have a watchpoint go out of scope now
if [gdb_test "continue" \
"Continuing.*\[Ww\]atchpoint.*deleted.*recurse \\(a=6\\) .*" \
"second instance watchpoint deleted when leaving scope"] then {
gdb_suppress_tests;
}
# Continue until second set of b (first instance).
# 24320 is allowed as the final value for b as that's the value
# b would have on systems with 16bit integers.
#
# We could fix the test program to deal with this too.
if [gdb_test "continue" \
"Continuing.*\[Ww\]atchpoint.*b.*Old value = 10.*New value = \(3628800|24320\).*return.*" \
"continue to first instance watchpoint, second time"] then {
gdb_suppress_tests
}
# Continue again. We should have a watchpoint go out of scope now.
#
# The former version expected the test to return to main().
# Now it expects the test to return to main or to stop in the
# function's epilogue.
#
# The problem is that gdb needs to (but doesn't) understand
# function epilogues in the same way as for prologues.
#
# If there is no hardware watchpoint (such as a x86 debug register),
# then watchpoints are done "the hard way" by single-stepping the
# target until the value of the watched variable changes. If you
# are single-stepping, you will eventually step into an epilogue.
# When you do that, the "top" stack frame may become partially
# deconstructed (as when you pop the frame pointer, for instance),
# and from that point on, GDB can no longer make sense of the stack.
#
# A test which stops in the epilogue is trying to determine when GDB
# leaves the stack frame in which the watchpoint was created. It does
# this basically by watching for the frame pointer to change. When
# the frame pointer changes, the test expects to be back in main, but
# instead it is still in the epilogue of the callee.
if [gdb_test "continue" \
"Continuing.*\[Ww\]atchpoint.*deleted.*\(main \\(\\) \|21.*\}\).*" \
"first instance watchpoint deleted when leaving scope"] then {
gdb_suppress_tests;
}
}
gdb_stop_suppressing_tests;
}
# Preserve the old timeout, and set a new one that should be
# sufficient to avoid timing out during this test.
set oldtimeout $timeout
set timeout [expr "$timeout + 60"]
verbose "Timeout is now $timeout seconds" 2
recurse_tests
# Restore the preserved old timeout value.
set timeout $oldtimeout
verbose "Timeout is now $timeout seconds" 2
Go to most recent revision | Compare with Previous | Blame | View Log