OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-7.2/] [gdb/] [testsuite/] [gdb.mi/] [mi-cli.exp] - Rev 330

Compare with Previous | Blame | View Log

# Copyright 2002, 2003, 2004, 2005, 2007, 2008, 2009, 2010
# Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# This file tests that GDB's console can be accessed via the MI.
# Specifically, we are testing the "interpreter-exec" command and that
# the commands that are executed via this command are properly executed.
# Console commands executed via MI should use MI output wrappers, MI event
# handlers, etc.

load_lib mi-support.exp
set MIFLAGS "-i=mi"

gdb_exit
if [mi_gdb_start] {
    continue
}

set testfile "basics"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/mi-cli
if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } {
     untested mi-cli.exp
     return -1
}

mi_gdb_test "-interpreter-exec" \
  {\^error,msg="mi_cmd_interpreter_exec: Usage: -interpreter-exec interp command"} \
  "-interpreter-exec with no arguments"

mi_gdb_test "-interpreter-exec console" \
  {\^error,msg="mi_cmd_interpreter_exec: Usage: -interpreter-exec interp command"} \
  "-interpreter-exec with one argument"

mi_gdb_test "-interpreter-exec bogus command" \
  {\^error,msg="mi_cmd_interpreter_exec: could not find interpreter \\\"bogus\\\""} \
  "-interpreter-exec with bogus interpreter"

set msg {Undefined command: \\\"bogus\\\"\.  Try \\\"help\\\"\.}
mi_gdb_test "-interpreter-exec console bogus" \
    "&\\\"$msg\\\\n\\\".*\\^error,msg=\\\"$msg\\\".*" \
  "-interpreter-exec console bogus"

# NOTE: cagney/2003-02-03: Not yet.
# mi_gdb_test "-interpreter-exec console \"file $binfile\"" \
#   {(=.*)+\^done} \
#   "-interpreter-exec console \"file \$binfile\""
mi_gdb_test "-interpreter-exec console \"file $binfile\"" \
  {~"Reading symbols from .*mi-cli...".*done} \
  "-interpreter-exec console \"file \$binfile\""

mi_run_to_main

set line_main_head    [gdb_get_line_number "main ("]
set line_main_body    [expr $line_main_head + 2]
set line_main_hello   [gdb_get_line_number "Hello, World!"]
set line_main_return  [expr $line_main_hello + 2]
set line_callee4_head [gdb_get_line_number "callee4 ("]
set line_callee4_body [expr $line_callee4_head + 2]
set line_callee4_next [expr $line_callee4_body + 1]

mi_gdb_test "-interpreter-exec console \"set args foobar\"" \
  {\^done} \
  "-interpreter-exec console \"set args foobar\""

mi_gdb_test "-interpreter-exec console \"show args\"" \
  {\~"Argument list to give program being debugged when it is started is \\\"foobar\\\"\.\\n".*\^done} \
  "-interpreter-exec console \"show args\""

# NOTE: cagney/2003-02-03: Not yet.
# mi_gdb_test "-interpreter-exec console \"break callee4\"" \
#   {(&.*)*.*~"Breakpoint 2 at.*\\n".*=breakpoint-create,number="2".*\^done} \
#   "-interpreter-exec console \"break callee4\""
mi_gdb_test "-interpreter-exec console \"break callee4\"" \
  {(&.*)*.*~"Breakpoint 2 at.*\\n".*\^done} \
  "-interpreter-exec console \"break callee4\""

mi_gdb_test "-interpreter-exec console \"info break\"" \
  {\~"Num[ \t]*Type[ \t]*Disp[ \t]*Enb[ \t]*Address[ \t]*What\\n".*~"2[ \t]*breakpoint[ \t]*keep[ \t]*y[ \t]*0x[0-9A-Fa-f]+[ \t]*in callee4 at .*basics.c:[0-9]+\\n".*\^done} \
  "-interpreter-exec console \"info break\""

mi_gdb_test "-interpreter-exec console \"set listsize 1\"" \
  {\^done} \
  "-interpreter-exec console \"set listsize 1\""

# {.*\~"32[ \t(\\t)]*callee1.*\\n".*\^done }
mi_gdb_test "-interpreter-exec console \"list\"" \
  ".*\~\"$line_main_body\[\\\\t \]*callee1.*;\\\\n\".*\\^done" \
  "-interpreter-exec console \"list\""

mi_execute_to "exec-continue" "breakpoint-hit" "callee4" "" ".*basics.c" $line_callee4_body \
    { "" "disp=\"keep\"" } "continue to callee4"

# NOTE: cagney/2003-02-03: Not yet.
# mi_gdb_test "100-interpreter-exec console \"delete 2\"" \
#   {.*=breakpoint-delete,number=\"2\".*\^done} \
#   "-interpreter-exec console \"delete 2\""
mi_gdb_test "100-interpreter-exec console \"delete 2\"" \
  {100\^done} \
  "-interpreter-exec console \"delete 2\""

# NOTE: cagney/2003-02-03: Not yet.
# mi_gdb_test "200-interpreter-exec console \"up\"" \
#   {.*=selected-frame-level-changed,level="1".*\^done} \
#   "-interpreter-exec console \"up\""
mi_gdb_test "200-interpreter-exec console \"up\"" \
  {~"#.*".*200\^done} \
  "-interpreter-exec console \"up\""

# NOTE: cagney/2003-02-03: Not yet.
# mi_gdb_test "300-interpreter-exec console \"down\"" \
#   {.*=selected-frame-level-changed,level="0".*\^done} \
#   "-interpreter-exec console \"down\""
mi_gdb_test "300-interpreter-exec console \"down\"" \
  {~"#.*".*300\^done} \
  "-interpreter-exec console \"down\""

# NOTE: cagney/2003-02-03: Not yet.
# mi_gdb_test "-interpreter-exec console \"frame 2\"" \
#   {.*=selected-frame-level-changed,level="2".*\^done} \
#   "-interpreter-exec console \"frame 2\""
mi_gdb_test "400-interpreter-exec console \"frame 2\"" \
  {~"#.*".*400\^done} \
  "-interpreter-exec console \"frame 2\""

# NOTE: cagney/2003-02-03: Not yet.
# mi_gdb_test "-stack-select-frame 0" \
#   {.*=selected-frame-level-changed,level="0".*\^done} \
#   "-stack-select-frame 0"
mi_gdb_test "500-stack-select-frame 0" \
  {500\^done} \
  "-stack-select-frame 0"

# When a CLI command is entered in MI session, the respose is different in
# sync and async modes. In sync mode normal_stop is called when current
# interpreter is CLI. So:
#   - print_stop_reason prints stop reason in CLI uiout, and we don't show it
#     in MI
#   - The stop position is printed, and appears in MI 'console' channel.
#
# In async mode the stop event is processed when we're back to MI interpreter,
# so the stop reason is printed into MI uiout an.
if {$async} {
    set reason "end-stepping-range"
} else {
    set reason ""
}

mi_execute_to "interpreter-exec console step" $reason "callee4" "" ".*basics.c" $line_callee4_next \
    "" "check *stopped from CLI command"

# NOTE: cagney/2003-02-03: Not yet.
# mi_gdb_test "-break-insert -t basics.c:$line_main_hello" \
#   {.*=breakpoint-create,number="3".*\^done} \
#   "-break-insert -t basics.c:\$line_main_hello"
mi_gdb_test "600-break-insert -t basics.c:$line_main_hello" \
        {600\^done,bkpt=.number="3",type="breakpoint".*\}} \
        "-break-insert -t basics.c:\$line_main_hello"

mi_execute_to "exec-continue" "breakpoint-hit" "main" "" ".*basics.c" \
    $line_main_hello { "" "disp=\"del\"" } \
    "-exec-continue to line $line_main_hello"

# Test that the token is output even for CLI commands
# Also test that *stopped includes frame information.
mi_gdb_test "34 next" \
    ".*34\\\^running.*\\*running,thread-id=\"all\"" \
    "34 next: run"

if {!$async} {
    gdb_expect {
        -re "~\[^\r\n\]+\r\n" {
        }
    }
}

# Note that the output does not include stop reason. This is fine.
# The purpose of *stopped notification for CLI command is to make
# sure that frontend knows that inferior is stopped, and knows where.
# Supplementary information is not necessary.
mi_expect_stop "$reason" "main" "" ".*basics.c" $line_main_return "" \
    "34 next: stop"

mi_gdb_test "-interpreter-exec console \"list\"" \
  "\~\"$line_main_return\[\\\\t ]*callme \\(1\\);\\\\n\".*\\^done" \
  "-interpreter-exec console \"list\" at basics.c:\$line_main_return"

mi_gdb_test "-interpreter-exec console \"help set args\"" \
  {\~"Set argument list to give program being debugged when it is started\.\\nFollow this command with any number of args, to be passed to the program\.".*\^done} \
  "-interpreter-exec console \"help set args\""

# NOTE: cagney/2003-02-03: Not yet.
# mi_gdb_test "-interpreter-exec console \"set \$pc=0x0\"" \
#   {.*=target-changed.*\^done} \
#   "-interpreter-exec console \"set \$pc=0x0\""
mi_gdb_test "888-interpreter-exec console \"set \$pc=0x0\"" \
  {888\^done} \
  "-interpreter-exec console \"set \$pc=0x0\""

#mi_gdb_test "-interpreter-exec console \"\"" \
  {} \
  "-interpreter-exec console \"\""

mi_gdb_exit
return 0

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.