OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-7.2/] [gdb/] [testsuite/] [gdb.opt/] [inline-cmds.exp] - Rev 330

Compare with Previous | Blame | View Log

# Copyright 2008, 2010 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

set testfile "inline-cmds"
set srcfile "${testfile}.c"
set srcfile2 "inline-markers.c"
set fullsrcfile "${srcdir}/${subdir}/${srcfile}"
set fullsrcfile2 "${srcdir}/${subdir}/${srcfile2}"
set sources [list ${fullsrcfile} ${fullsrcfile2}]
set binfile ${objdir}/${subdir}/${testfile}

if  { [gdb_compile $sources ${binfile} \
           executable {debug optimize=-O2}] != "" } {
    untested inline-cmds.exp
    return -1
}

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}

gdb_test_no_output "set listsize 1"

runto_main

get_compiler_info $binfile
get_debug_format
if { [skip_inline_frame_tests] } {
    untested inline-cmds.exp
    return
}

# First, check that the things we expected to be inlined really were,
# and those that shouldn't be weren't.
set line1 [gdb_get_line_number "set breakpoint 1 here" ${srcfile2}]
gdb_breakpoint $srcfile2:$line1
set line2 [gdb_get_line_number "set breakpoint 2 here" ${srcfile2}]
gdb_breakpoint $srcfile2:$line2

gdb_test "continue" ".*set breakpoint 1 here.*" "continue to bar (1)"
gdb_test "backtrace" "#0  bar.*#1  .*func1.*#2  .*main.*" \
    "backtrace from bar (1)"
gdb_test "up" "#1  .*func1.*" "up from bar (1)"
gdb_test "info frame" ".*inlined into frame.*" "func1 inlined (1)"

gdb_test "continue" ".*set breakpoint 1 here.*" "continue to bar (2)"
gdb_test "backtrace" "#0  bar.*#1  .*func1.*#2  .*func2.*#3  .*main.*" \
    "backtrace from bar (2)"
gdb_test "up" "#1  .*func1.*" "up from bar (2)"
gdb_test "info frame" ".*inlined into frame.*" "func1 inlined (2)"
gdb_test "up" "#2  .*func2.*" "up from func1 (2)"
gdb_test "info frame" ".*inlined into frame.*" "func2 inlined (2)"

gdb_test "continue" ".*set breakpoint 2 here.*" "continue to marker"
gdb_test "backtrace" "#0  marker.*#1  .*main.*" "backtrace from marker"
gdb_test "info frame" ".*called by frame.*" "marker not inlined"

# Next, check that we can next over inlined functions.  We should not end up
# inside any of them.
delete_breakpoints
runto_main

# The lines before the first inlined call.
set first "x = 7|y = 8"

# Some extra lines that end up in our stepping due to code motion.
set opt "start of main|result = 0"

# We start this test with a "list" instead of a "next", in case the
# first non-prologue instruction in main comes from the inlined function.
set msg "next over inlined functions"
gdb_test_multiple "list" $msg {
    -re "($first|result = func1|result = func2|$opt).*$gdb_prompt $" {
        send_gdb "next\r"
        exp_continue
    }
    -re "marker \\\(\\\);\r\n$gdb_prompt $" {
        pass $msg
    }
}

# Check that when next shows the call of func1, it has not happened yet.
runto_main

# Like the return value of gdb_test: -1 something is wrong, 0 passed, 1 failed.
set bt_test -1
set x_test -1
set func1_step -1

set last_was_func1_call 0
set msg "next past inlined func1"
gdb_test_multiple "list" $msg {
    -re "($first|$opt).*$gdb_prompt $" {
        set last_was_func1_call 0
        send_gdb "next\r"
        exp_continue
    }
    -re "result = func1 \\\(\\\);\r\n$gdb_prompt $" {
        # Check whether x has been set.  If 0, we may be doing something
        # else associated with this line besides the inlined call - e.g.
        # loading the address of result.  If 7, we may be at the call site.
        # If 15, though, we might be past the call and back at the store to
        # result - that's OK, as long as we weren't just here (see
        # func1_step above).
        set x_val -1
        gdb_test_multiple "print x" "" {
            -re "\\\$$decimal = (\[0-9\]*)\r\n$gdb_prompt $" {
                set x_val $expect_out(1,string)
            }
            -re "$gdb_prompt $" { }
        }
        if { $x_val == 0 || $x_val == 7 } {
            if { $x_test != 1 } {
                set x_test 0
            }
        } elseif { $x_val == 15 } {
            if { $func1_step == -1 } {
                # We passed func1 without stopping at the call site.
                set x_test 1
            }
        } else {
            set x_test 1
        }

        # func1 should not show up on backtraces if we are at its call
        # site.
        if { $bt_test != 1 } {
            set bt_test [gdb_test "backtrace" "#0  \[^#]*main.*" ""]
        }

        # When we next over func1, we should not return to the same
        # line.  But we might go past the line, according to source
        # code order, and then come back.  A valid but odd layout is
        # body of func1, load result's address into a register using
        # the source location of "result = 0" several lines down, and
        # then return to this line for the store.  GCC 4.3 does that
        # on ARM.
        if { $last_was_func1_call } {
            set func1_step 1
        } elseif { $func1_step == -1 } {
            set func1_step 0
        }
        set last_was_func1_call 1

        send_gdb "next\r"
        exp_continue
    }

    -re "result = func2 \\\(\\\);\r\n$gdb_prompt $" {
        pass $msg
    }
}

if { $x_test == 0 } {
    pass "print x before func1"
} else {
    fail "print x before func1"
}

if { $bt_test == 0 } {
    pass "backtrace does not include func1"
} else {
    fail "backtrace does not include func1"
}

if { $bt_test == 0 } {
    pass "stepped over call to func1"
} else {
    fail "stepped over call to func1"
}

# Next, check that we can single step into inlined functions.  We should always
# "stop" at the call sites before entering them.
runto_main

set msg "step into func1"
set saw_call_site 0
gdb_test_multiple "list" $msg {
    -re "($first|$opt).*$gdb_prompt $" {
        send_gdb "step\r"
        exp_continue
    }
    -re "result = func1.*$gdb_prompt $" {
        set saw_call_site 1
        send_gdb "step\r"
        exp_continue
    }
    -re "func1 \\\(\\\) at .*\r\n$decimal.*bar \\\(\\\);\r\n$gdb_prompt $" {
        if { $saw_call_site } {
            pass $msg
        } else {
            fail $msg
        }
    }
}

# Check finish out of an inlined function.
set msg "finish from func1"
gdb_test_multiple "finish" $msg {
    -re "result = func1 \\\(\\\);\r\n$gdb_prompt $" {
        pass $msg
    }
    -re "($first|$opt).*$gdb_prompt $" {
        # Whoops.  We finished, but ended up back at an earlier line.  Keep
        # trying.
        send_gdb "step\r"
        exp_continue
    }
    -re "func1 \\\(\\\) at .*\r\n$decimal.*bar \\\(\\\);\r\n$gdb_prompt $" {
        send_gdb "finish\r"
        exp_continue
    }
}

# Test some corner cases involving consecutive inlined functions.
set line3 [gdb_get_line_number "set breakpoint 3 here"]
gdb_breakpoint $line3
gdb_continue_to_breakpoint "consecutive func1"

gdb_test "next" ".*func1 .*first call.*" "next to first func1"
set msg "next to second func1"
gdb_test_multiple "next" $msg {
    -re ".*func1 .*second call.*$gdb_prompt $" {
        pass $msg
    }
    -re ".*marker .*$gdb_prompt $" {
        # This assembles to two consecutive call instructions.
        # Both appear to be at the same line, because they're
        # in the body of the same inlined function.  This is
        # reasonable for the line table.  GDB should take the
        # containing block and/or function into account when
        # deciding how far to step.  The single line table entry
        # is actually two consecutive instances of the same line.
        kfail gdb/NNNN $msg
    }
}

# It is easier when the two inlined functions are not on the same line.
set line4 [gdb_get_line_number "set breakpoint 4 here"]
gdb_breakpoint $line4
gdb_continue_to_breakpoint "func1 then func3"

gdb_test "next" ".*func1 \\\(\\\);" "next to func1 before func3"
gdb_test "next" ".*func3 \\\(\\\);" "next to func3"

# Test finishing out of one thing and into another.
set line5 [gdb_get_line_number "set breakpoint 5 here"]
gdb_breakpoint $line5
gdb_continue_to_breakpoint "finish into func1"

gdb_test "next" ".*marker \\\(\\\);" "next to finish marker"
gdb_test "step" ".*set breakpoint 2 here.*" "step into finish marker"
gdb_test "finish" "func1 \\\(\\\);" "finish from marker to func1"

gdb_test "step" "bar \\\(\\\);" "step into func1 for finish"
gdb_test "finish" "func3 \\\(\\\);" "finish from func1 to func3"

# Test a deeper call stack.
set line6 [gdb_get_line_number "set breakpoint 6 here"]
gdb_breakpoint $line6
gdb_continue_to_breakpoint "before the outer_inline call"
gdb_test "step" "marker \\\(\\\) at .*" "reach 1 the outer_inline call"
gdb_test "finish" "main \\\(\\\) at .*outer_inline2 \\\(\\\);" "reach outer_inline2"
gdb_test "bt" "#0  main.*" "backtrace at main of outer_inline"
gdb_test "step" "outer_inline2 \\\(\\\) at .*" "enter outer_inline2"
gdb_test "bt" "#0  outer_inline2.*#1  main.*" "backtrace at outer_inline2"
gdb_test "step" "outer_inline1 \\\(\\\) at .*" "enter outer_inline1 from outer_inline2"

set msg "backtrace at outer_inline1"
gdb_test_multiple "bt" $msg {
    -re "#0  outer_inline1.*#1  outer_inline2.*#2  main.*$gdb_prompt $" {
        pass $msg
    }
    -re "#0  $hex in outer_inline1.*#1  outer_inline2.*#2  main.*$gdb_prompt $" {
        # Binutils PR gas/6717.  Gas moves .loc past .p2align and the
        # leading nop of the inlined call appears to be on the same line
        # as main's call to marker.
        xfail $msg
        gdb_test "step" "noinline \\\(\\\);" "step to call of noinline"
    }
}

gdb_test "step" "noinline \\\(\\\) at .*" "enter noinline from outer_inline1"
gdb_test "bt" "#0  noinline.*#1  .*outer_inline1.*#2  .*outer_inline2.*#3  main.*" "backtrace at noinline from outer_inline1"
gdb_test "step" "inlined_fn \\\(\\\) at .*" "enter inlined_fn from noinline"
gdb_test "bt" "#0  inlined_fn.*#1  noinline.*#2  .*outer_inline1.*#3  .*outer_inline2.*#4  main.*" "backtrace at inlined_fn from noinline"
gdb_test "info frame" ".*inlined into frame.*" "inlined_fn from noinline inlined"
gdb_test "up" "#1  noinline.*" "up to noinline"
gdb_test "info frame" ".*\n called by frame.*" "noinline from outer_inline1 not inlined"
gdb_test "up" "#2  .*outer_inline1.*" "up to outer_inline1"
gdb_test "info frame" ".*inlined into frame.*" "outer_inline1 inlined"
gdb_test "up" "#3  .*outer_inline2.*" "up to outer_inline2"
gdb_test "info frame" ".*inlined into frame.*" "outer_inline2 inlined"
gdb_test "up" "#4  main.*" "up from outer_inline2"
gdb_test "info frame" ".*\n caller of frame.*" "main not inlined"

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.