OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.17.0/] [libgloss/] [cris/] [Makefile.in] - Rev 158

Compare with Previous | Blame | View Log

#
# libgloss Makefile.in for CRIS.  Copied and modified from mcore long ago.
#

DESTDIR =
VPATH = @srcdir@
srcdir = @srcdir@
objdir = .
srcroot = $(srcdir)/../..
objroot = $(objdir)/../..

prefix = @prefix@
exec_prefix = @exec_prefix@

host_alias = @host_alias@
target_alias = @target_alias@

bindir = @bindir@
libdir = @libdir@
tooldir = $(exec_prefix)/$(target_alias)

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

# Multilib support variables.
# TOP is used instead of MULTI{BUILD,SRC}TOP.
MULTIDIRS =
MULTISUBDIR =

SHELL = /bin/sh

CC = @CC@

AS = @AS@
AR = @AR@
LD = @LD@
RANLIB = @RANLIB@

OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
        then echo ${objroot}/../binutils/objdump ; \
        else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
        then echo ${objroot}/../binutils/objcopy ; \
        else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`

CFLAGS          = -g
SCRIPTS         =

OBJS = outbyte.o

# Beware: GNU make construct used (shell call).  Since GCC at the time
# of this writing requires GNU make >= 3.79.1, this should pose no
# problem.
SYSCALL_CFILES := $(shell sed -ne 's/^cat > \([^ ]*\).*/\1/p' < $(srcdir)/gensyscalls)

# Here is all of the simulator stuff.
# Actually, now it's just the GNU/Linux stuff, as that's also the
# simulator ABI.  The name of the library is different, though.
SIM_SCRIPTS     =
SIM_LDFLAGS     =
SIM_BSP         = libsyssim.a
SIM_CRT0        = $(LIN_CRT0)
SIM_OBJS        = $(LIN_OBJS)
SIM_TEST        = sim-test
SIM_INSTALL     = install-sim

# Here is all of the GNU/Linux stuff.  At present we don't build newlib
# and libgloss for cris*-linux-gnu*, but it's nice to keep that as an
# option.
LIN_PREFIX      =
LIN_LDFLAGS     =
LIN_BSP         = libsyslinux.a
LIN_CRT0        = lcrt0.o
LIN_EXTRA       = crti.o crtn.o crt1.o
LIN_OBJS        = close.o execve.o exit.o fcntl.o fork.o fstat.o getpid.o \
 gettod.o isatty.o kill.o link.o lseek.o open.o read.o \
 rename.o sbrk.o stat.o times.o unlink.o wait.o write.o ${OBJS}
LIN_SCRIPTS     =
LIN_TEST        =
LIN_INSTALL     = install-lin

# In (over)due time, here will be all stuff necessary for a development
# board.
BSP_PREFIX      =
BSP_LDFLAGS     =
BSP_BSP         = libbsp.a
BSP_CRT0        = crt0.o
BSP_OBJS        = ${OBJS} setup.o irqtable.o
BSP_SCRIPTS     =
BSP_TEST        =
BSP_INSTALL     = install-bsp

ALL_INSTALL_FILES = \
 ${SIM_CRT0} ${SIM_EXTRA} ${SIM_BSP} \
 ${LIN_CRT0} ${LIN_EXTRA} ${LIN_BSP} \
 ${BSP_CRT0} ${BSP_EXTRA} ${BSP_BSP}

ALL_INSTALL_FILES_NEWLIB_COPY = \
 $(sort ${ALL_INSTALL_FILES:%=$(objroot)/newlib/%}) $(objroot)/newlib/libnosys.a

# Host specific makefile fragment comes in here.
@host_makefile_frag@

# Need to augment the definition from host_makefile_frag above.
INCLUDES += -I$(srcdir)

all: ${ALL_INSTALL_FILES} ${ALL_INSTALL_FILES_NEWLIB_COPY} libnosys.a

#
# Here's where we build the board support packages for each target.
#
${SIM_BSP}: ${SIM_OBJS}
        ${AR} ${ARFLAGS} ${SIM_BSP} ${SIM_OBJS}
        ${RANLIB} ${SIM_BSP}

${BSP_BSP}: ${BSP_OBJS}
        ${AR} ${ARFLAGS} ${BSP_BSP} ${BSP_OBJS}
        ${RANLIB} ${BSP_BSP}

${LIN_BSP}: ${LIN_OBJS}
        ${AR} ${ARFLAGS} ${LIN_BSP} ${LIN_OBJS}
        ${RANLIB} ${LIN_BSP}

# We need a link to libnosys.a in this directory, since this is the
# directory used when test-compiling for configuration for other parts and
# when running the testsuite.  By using a symbolic link, it does not
# matter whether libnosys.a is built yet when the rule is executed.
libnosys.a:
        ln -s ../libnosys/libnosys.a

# Toplevel build rules for various other libraries have gcc -B options
# applied so the newlib build directory is reached, but not the target
# libgloss directory (whose name is unknown to the toplevel configury
# anyway).  Configury tests that check for a successful link therefore
# fail; they can't find crt0.o and non-libc.a+libm.a libraries.  We copy
# over all files we would install to the neighboring newlib directory.
# Only the default crt0.o and libraries are needed, but we do them all for
# completeness.  They're however installed from here, not from the newlib
# build directory.
$(objroot)/newlib/%: %
        cp -p $^ $@

# This rule, being more specific, overrides the pattern rule above.
$(objroot)/newlib/libnosys.a:
        ln -s ../libgloss/libnosys/libnosys.a $(objroot)/newlib

#
# Build a test program for each target board. Just trying to get
# it to link is a good test, so we ignore all the errors for now.
#
#
# Here's where we build the test programs for each target.
#
.PHONY: test
test:   ${SIM_TEST} ${BSP_TEST}

sim-test:       sim-test.x sim-test.dis

sim-test.x:     test.o ${SIM_CRT0} ${SIM_BSP}
        ${CC} ${LDFLAGS_FOR_TARGET} -L${objdir} \
        ${SIM_CRT0} test.o \
        -o sim-test.x ${LIBS_FOR_TARGET} -lc ${SIM_BSP}

sim-test.dis:   sim-test.x
        ${OBJDUMP} -d sim-test.x > sim-test.dis


test.o: ${srcdir}/m68k/test.c

# Debug usage.
.c.S:
        ${CC} ${CFLAGS_FOR_TARGET} $(INCLUDES) $(CFLAGS) -c $<

# Caveat: for the -melinux multilib in cris-axis-aout, crt0.o is the
# same as lcrt0.o, while elsewhere (other cris-axis-aout multilib and
# cris-axis-elf) it's crt0.c compiled.
crt0.o: lcrt0.o crt0.S
        case "${MULTISUBDIR}" in \
          */elinux) \
           cp -p $< $@; st=$$?;; \
          *) \
           case "$?" in \
            *crt0.S) \
             $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -c -xassembler-with-cpp $(srcdir)/crt0.S;; \
            *) touch $@;; \
            esac; \
           st=$$?;; \
        esac; exit $$st

crt1.o: lcrt0.o
        cp -p $< $@

clean mostlyclean:
        rm -f a.out core *.i *.o *-test *.srec *.dis *.x $(SIM_BSP) $(BSP_BSP) $(LIN_BSP) libnosys.a

distclean maintainer-clean realclean: clean
        rm -f Makefile config.status *~

.PHONY: install info install-info clean-info
install: ${SIM_INSTALL} ${BSP_INSTALL} ${LIN_INSTALL}

# Note that bsp and elinux objects are exclusive: do not overlap
# installed files.
install-bsp:
        case "${MULTISUBDIR}" in \
          */elinux) ;; \
          *) set -e; \
             for x in ${BSP_CRT0} ${BSP_BSP} ${BSP_SCRIPTS}; do \
                ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \
             done;; \
        esac

install-sim:
        set -e; \
        for x in ${SIM_CRT0} ${SIM_BSP} ${SIM_SCRIPTS}; do \
          ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \
        done

install-lin:
        case "${MULTISUBDIR}" in \
          */elinux) \
            ${INSTALL_DATA} ${LIN_CRT0} $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/crt0.o; \
            set -e; \
            for x in ${LIN_BSP} ${LIN_SCRIPTS}; do \
              ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \
            done;; \
          *) \
            set -e; \
            for x in ${LIN_BSP} ${LIN_SCRIPTS} ${LIN_EXTRA}; do \
              ${INSTALL_DATA} $$x ${tooldir}/lib${MULTISUBDIR}/$$x; \
            done;; \
        esac

doc:
info:
install-info:
clean-info:

Makefile: Makefile.in config.status @host_makefile_frag_path@
        $(SHELL) config.status

config.status: configure
        $(SHELL) config.status --recheck

$(SYSCALL_CFILES): syscalls.stamp

syscalls.stamp: gensyscalls
        $(SHELL) $(srcdir)/gensyscalls
        touch $@

# Dependencies that could and should be auto-generated.
close.o: close.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
execve.o: execve.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
exit.o: exit.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
fork.o: fork.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
fstat.o: fstat.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
fcntl.o: fcntl.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
getpid.o: getpid.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
gettod.o: gettod.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
isatty.o: isatty.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
kill.o: kill.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
link.o: link.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
lseek.o: lseek.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
open.o: open.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
read.o: read.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
rename.o: rename.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
sbrk.o: sbrk.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
stat.o: stat.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
times.o: times.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
unlink.o: unlink.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
wait.o: wait.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
write.o: write.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
lcrt0.o: lcrt0.c linunistd.h $(objdir)/../libnosys/config.h $(srcdir)/../libnosys/warning.h
setup.o: setup.S
irqtable.o: irqtable.S
crti.o: crti.c
crtn.o: crtn.c

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.