OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.17.0/] [libgloss/] [or32/] [crt0.S] - Rev 158

Go to most recent revision | Compare with Previous | Blame | View Log

#include "spr_defs.h"
#include "board.h"
/* ======================================================= [ macros ] === */


#define CLEAR_GPR(gpr) \
        l.or    gpr, r0, r0
    
#define LOAD_SYMBOL_2_GPR(gpr,symbol)  \
        .global symbol ;               \
        l.movhi gpr, hi(symbol) ;      \
        l.ori   gpr, gpr, lo(symbol)

#define UNHANDLED_EXCEPTION            \
        l.addi  r1, r1, -128;          \
        l.sw    4(r1), r3;             \
        l.sw    8(r1), r4;             \
        l.mfspr r3,r0,SPR_PC;          \
        l.mfspr r4,r0,SPR_EPCR_BASE;   \
        l.j default_exception_handler; \
        l.nop;


/* =================================================== [ exceptions ] === */
        .section .vectors,"ax"


/* ---[ 0x100: RESET exception ]----------------------------------------- */
        .org 0x100      
        l.nop

        /* Jump to program initialisation code */
        l.movhi r2,hi(_start)
        l.ori   r2,r2,lo(_start)
        l.jr    r2
        l.nop

/* ---[ 0x200: BUS exception ]------------------------------------------- */
        .org 0x200
        UNHANDLED_EXCEPTION

/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
        .org 0x300
        UNHANDLED_EXCEPTION
        
/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
        .org 0x400
        UNHANDLED_EXCEPTION

/* ---[ 0x500: Timer exception ]----------------------------------------- */
        .org 0x500
        UNHANDLED_EXCEPTION

/* ---[ 0x600: Aligment exception ]-------------------------------------- */
        .org 0x600
        UNHANDLED_EXCEPTION
        
/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
        .org 0x700
        UNHANDLED_EXCEPTION

/* ---[ 0x800: External interrupt exception ]---------------------------- */
        .org 0x800
        UNHANDLED_EXCEPTION

/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
        .org 0x900
        UNHANDLED_EXCEPTION
        
/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
        .org 0xa00
        UNHANDLED_EXCEPTION
        
                
/* ---[ 0xb00: Range exception ]----------------------------------------- */
        .org 0xb00
        UNHANDLED_EXCEPTION
        

/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
        .org 0xc00
        UNHANDLED_EXCEPTION
        

/* ---[ 0xd00: Trap exception ]------------------------------------------ */
        .org 0xd00
        UNHANDLED_EXCEPTION
        

/* ---[ 0xe00: Trap exception ]------------------------------------------ */
        .org 0xe00
        UNHANDLED_EXCEPTION
        
        
/* ---[ 0xf00: Reserved exceptions ]------------------------------------- */
        .org 0xf00
        UNHANDLED_EXCEPTION
        
        .org 0x1000
        UNHANDLED_EXCEPTION
        
        .org 0x1100
        UNHANDLED_EXCEPTION
        
        .org 0x1200
        UNHANDLED_EXCEPTION
        
        .org 0x1300
        UNHANDLED_EXCEPTION
        
        .org 0x1400
        UNHANDLED_EXCEPTION
        
        .org 0x1500
        UNHANDLED_EXCEPTION
        
        .org 0x1600
        UNHANDLED_EXCEPTION
        
        .org 0x1700
        UNHANDLED_EXCEPTION
        
        .org 0x1800
        UNHANDLED_EXCEPTION
        
        .org 0x1900
        UNHANDLED_EXCEPTION
        
        .org 0x1a00
        UNHANDLED_EXCEPTION
        
        .org 0x1b00
        UNHANDLED_EXCEPTION
        
        .org 0x1c00
        UNHANDLED_EXCEPTION
        
        .org 0x1d00
        UNHANDLED_EXCEPTION
        
        .org 0x1e00
        UNHANDLED_EXCEPTION
        
        .org 0x1f00
        UNHANDLED_EXCEPTION


/* -----------------------------------------------------------------------------
 * Main entry point
 * ---------------------------------------------------------------------------*/
        .text
        .global _start
        .type   _start,@function
_start: 

        /* Cache initialisation */
.if IC_ENABLE || DC_ENABLE
        /* Flush IC and/or DC */
        l.addi  r10,r0,0   
        l.addi  r11,r0,0   
        l.addi  r12,r0,0   
.if IC_ENABLE
        l.addi  r11,r0,IC_SIZE
.endif
.if DC_ENABLE
        l.addi  r12,r0,DC_SIZE
.endif
        l.sfleu r12,r11
        l.bf    .L0
        l.nop
        l.add   r11,r0,r12
.L0:
.if IC_ENABLE
        l.mtspr r0,r10,SPR_ICBIR
.endif
.if DC_ENABLE
        l.mtspr r0,r10,SPR_DCBIR
.endif
        l.sfne  r10,r11
        l.bf    .L0   
        l.addi  r10,r10,16

        /* Enable IC and/or DC */
        l.addi  r10,r0,(SPR_SR_SM)
.if IC_ENABLE
        l.ori   r10,r10,(SPR_SR_ICE)
.endif
.if DC_ENABLE
        l.ori   r10,r10,(SPR_SR_DCE)
.endif
        l.mtspr r0,r10,SPR_SR
        l.nop
        l.nop
        l.nop
        l.nop
        l.nop
.endif

        /* Initialise stack and frame pointer (set to samve value) */
        l.and   r1,r1,r2
        l.movhi r1,hi(_stack)
        l.ori   r1,r1,lo(_stack)
        l.add   r2,r1,r0

        
        /* Clear BSS */
        l.movhi r28,hi(___bss_start)
        l.ori   r28,r28,lo(___bss_start)
        l.movhi r30,hi(__end)
        l.ori   r30,r30,lo(__end)

.L1:
        l.sw    (0)(r28),r0
        l.sfltu r28,r30
        l.bf    .L1
        l.addi  r28,r28,4

        /* Call global and static constructors */
        /* l.jal        init */
        
        /* Setup destructors to be called from exit if main never returns */
        /* l.movhi      r3,hi(fini) */
        /* l.ori        r3,r3,lo(fini) */
        /* l.jal        _atexit */
        
        /* Initialise UART in a C function */
        /* l.jal    _uart_init */
        /* l.nop */
        
        /* Jump to main program entry point (argc = argv = envp = 0) */
        l.or    r3,r0,r0
        l.or    r4,r0,r0
        l.jal   _main
        l.or    r5,r0,r0
        
        /* If program exits, call exit routine */
        l.jal   _exit
        l.addi  r3,r11,0

        .size   _start, .-_start

/* ====================================== [ default exception handler ] === */

default_exception_handler:
        l.sw    0x00(r1),r2
        l.sw    0x0c(r1),r5
        l.sw    0x10(r1),r6
        l.sw    0x14(r1),r7
        l.sw    0x18(r1),r8
        l.sw    0x1c(r1),r9
        l.sw    0x20(r1),r10
        l.sw    0x24(r1),r11
        l.sw    0x28(r1),r12
        l.sw    0x2c(r1),r13
        l.sw    0x30(r1),r14
        l.sw    0x34(r1),r15
        l.sw    0x38(r1),r16
        l.sw    0x3c(r1),r17
        l.sw    0x40(r1),r18
        l.sw    0x44(r1),r19
        l.sw    0x48(r1),r20
        l.sw    0x4c(r1),r21
        l.sw    0x50(r1),r22
        l.sw    0x54(r1),r23
        l.sw    0x58(r1),r24
        l.sw    0x5c(r1),r25
        l.sw    0x60(r1),r26
        l.sw    0x64(r1),r27
        l.sw    0x68(r1),r28
        l.sw    0x6c(r1),r29
        l.sw    0x70(r1),r30
        l.sw    0x74(r1),r31
        l.sw    0x78(r1),r32
        
        l.jal   _default_exception_handler_c
        l.nop
        
        l.lwz    r2,0x00(r1)
        l.lwz    r3,0x04(r1)
        l.lwz    r4,0x08(r1)
        l.lwz    r5,0x0c(r1)
        l.lwz    r6,0x10(r1)
        l.lwz    r7,0x14(r1)
        l.lwz    r8,0x18(r1)
        l.lwz    r9,0x1c(r1)
        l.lwz    r10,0x20(r1)
        l.lwz    r11,0x24(r1)
        l.lwz    r12,0x28(r1)
        l.lwz    r13,0x2c(r1)
        l.lwz    r14,0x30(r1)
        l.lwz    r15,0x34(r1)
        l.lwz    r16,0x38(r1)
        l.lwz    r17,0x3c(r1)
        l.lwz    r18,0x40(r1)
        l.lwz    r19,0x44(r1)
        l.lwz    r20,0x48(r1)
        l.lwz    r21,0x4c(r1)
        l.lwz    r22,0x50(r1)
        l.lwz    r23,0x54(r1)
        l.lwz    r24,0x58(r1)
        l.lwz    r25,0x5c(r1)
        l.lwz    r26,0x60(r1)
        l.lwz    r27,0x64(r1)
        l.lwz    r28,0x68(r1)
        l.lwz    r29,0x6c(r1)
        l.lwz    r30,0x70(r1)
        l.lwz    r31,0x74(r1)
        l.lwz    r32,0x78(r1)

        l.addi  r1,r1,128

        l.rfe
        l.nop

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.