URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.17.0/] [libgloss/] [rs6000/] [Makefile.in] - Rev 148
Go to most recent revision | Compare with Previous | Blame | View Log
# Copyright (c) 1995, 1996, 1998 Cygnus Support
#
# The authors hereby grant permission to use, copy, modify, distribute,
# and license this software and its documentation for any purpose, provided
# that existing copyright notices are retained in all copies and that this
# notice is included verbatim in any distributions. No written agreement,
# license, or royalty fee is required for any of the authorized uses.
# Modifications to this software may be copyrighted by their authors
# and need not follow the licensing terms described here, provided that
# the new terms are clearly indicated on the first page of each file where
# they apply.
#
#
# This currently works with the PPC simulator.
#
DESTDIR =
VPATH = @srcdir@:@srcdir@/..
srcdir = @srcdir@
objdir = .
srcroot = $(srcdir)/../..
objroot = $(objdir)/../..
prefix = @prefix@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
target_alias = @target_alias@
bindir = @bindir@
libdir = @libdir@
tooldir = $(exec_prefix)/$(target_alias)
# Multilib support variables.
# TOP is used instead of MULTI{BUILD,SRC}TOP.
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
SHELL = /bin/sh
CC = @CC@
AS = @AS@
AR = @AR@
LD = @LD@
RANLIB = @RANLIB@
OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
then echo ${objroot}/../binutils/objdump ; \
else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
then echo ${objroot}/../binutils/objcopy ; \
else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`
OBJS = fstat.o getpid.o isatty.o kill.o putnum.o stat.o unlink.o mcount.o
CFLAGS = -g
SCRIPTS = ${SIM_SCRIPTS} ${MVME_SCRIPTS} ${YELLOWKNIFE_SCRIPTS} ${ADS_SCRIPTS}
# Here is all of the simulator stuff
SIM_SCRIPTS =
SIM_LDFLAGS =
SIM_BSP = libsim.a
SIM_CRT0 = sim-crt0.o
SIM_OBJS = sim-print.o sim-inbyte.o sim-sbrk.o sim-abort.o sim-errno.o simulator.o sim-getrusage.o
SIM_TEST = sim-test
SIM_INSTALL = install-sim
# Here is all the mvme stuff
MVME_SCRIPTS =
MVME_LDFLAGS =
MVME_BSP = libmvme.a
MVME_CRT0 = crt0.o
MVME_OBJS = mvme-exit.o mvme-inbyte.o mvme-outbyte.o open.o close.o lseek.o sbrk.o mvme-read.o mvme-print.o
MVME_TEST = mvme-test
MVME_INSTALL = install-mvme
# Here is the Solaris stuff
#SOLARIS_SCRIPTS=
#SOLARIS_LDFLAGS=
#SOLARIS_BSP = libsolaris.a
#SOLARIS_CRT0 =
#SOLARIS_OBJS = sol-cfuncs.o sol-syscall.o
#SOLARIS_TEST = sol-test
#SOLARIS_INSTALL= install-solaris
# Here is the Linux stuff
#LINUX_SCRIPTS =
#LINUX_LDFLAGS =
#LINUX_BSP = liblinux.a
#LINUX_CRT0 =
#LINUX_OBJS = lin-cfuncs.o lin-syscall.o
#LINUX_TEST = linux-test
#LINUX_INSTALL = install-linux
YELLOWKNIFE_SCRIPTS = yellowknife.ld
YELLOWKNIFE_CRT0 = crt0.o
YELLOWKNIFE_BSP = libyk.a
YELLOWKNIFE_OBJS = open.o close.o lseek.o sbrk.o mvme-exit.o mvme-inbyte.o mvme-outbyte.o mvme-read.o mvme-print.o
YELLOWKNIFE_TEST = yellowknife-test
YELLOWKNIFE_INSTALL = install-yellowknife
ADS_SCRIPTS = ads.ld
ADS_CRT0 = crt0.o
ADS_BSP = libads.a
ADS_OBJS = open.o close.o lseek.o sbrk.o ads-exit.o ads-io.o
ADS_TEST = ads-test
ADS_INSTALL = install-ads
MBX_SCRIPTS = mbx.ld
MBX_SPECS = mbx.specs
MBX_CRT0 = crt0.o
MBX_BSP = libmbx.a
MBX_OBJS = open.o close.o lseek.o sbrk.o read.o write.o mbx-exit.o mbx-inbyte.o mbx-outbyte.o mbx-print.o
MBX_TEST = mbx-test
MBX_INSTALL = install-mbx
# Host specific makefile fragment comes in here.
@host_makefile_frag@
#
# build a test program for each target board. Just trying to get
# it to link is a good test, so we ignore all the errors for now.
#
all: \
${SIM_CRT0} ${SIM_BSP} \
${MVME_CRT0} ${MVME_BSP} \
${SOLARIS_CRT0} ${SOLARIS_BSP} \
${LINUX_CRT0} ${LINUX_BSP} \
${YELLOWKNIFE_CRT0} ${YELLOWKNIFE_BSP} \
${ADS_CRT0} ${ADS_BSP} \
${MBX_CRT0} ${MBX_BSP}
#
# here's where we build the board support packages for each target
#
${SIM_BSP}: ${OBJS} ${SIM_OBJS}
${AR} ${ARFLAGS} $@ ${SIM_OBJS} ${OBJS}
${RANLIB} $@
${MVME_BSP}: ${OBJS} ${MVME_OBJS}
${AR} ${ARFLAGS} $@ ${MVME_OBJS} ${OBJS}
${RANLIB} $@
${LINUX_BSP}: ${OBJS} ${LINUX_OBJS}
${AR} ${ARFLAGS} $@ ${LINUX_OBJS} ${OBJS}
${RANLIB} $@
${SOLARIS_BSP}: ${OBJS} ${SOLARIS_OBJS}
${AR} ${ARFLAGS} $@ ${SOLARIS_OBJS}
${RANLIB} $@
${YELLOWKNIFE_BSP}: ${OBJS} ${YELLOWKNIFE_OBJS}
${AR} ${ARFLAGS} $@ ${YELLOWKNIFE_OBJS} ${OBJS}
${RANLIB} $@
${ADS_BSP}: ${OBJS} ${ADS_OBJS}
${AR} ${ARFLAGS} $@ ${ADS_OBJS} ${OBJS}
${RANLIB} $@
${MBX_BSP}: ${OBJS} ${MBX_OBJS}
${AR} ${ARFLAGS} $@ ${MBX_OBJS} ${OBJS}
${RANLIB} $@
#
# here's where we build the test programs for each target
#
.PHONY: test
test: ${SIM_TEST} ${MVME_TEST} ${YELLOWKNIFE_TEST} ${ADS_TEST} ${MBX_TEST}
sim-test: sim-test.x sim-test.dis
sim-test.x: test.o ${SIM_CRT0} ${SIM_BSP}
${CC} ${LDFLAGS_FOR_TARGET} -L${objdir} \
${SIM_CRT0} test.o \
-o sim-test.x ${LIBS_FOR_TARGET} -lc ${SIM_BSP}
sim-test.dis: sim-test.x
${OBJDUMP} -d sim-test.x > sim-test.dis
mvme-test: mvme-test.x mvme-test.dis mvme-test.srec
mvme-test.x: test.o ${MVME_CRT0} ${MVME_BSP}
${CC} ${LDFLAGS_FOR_TARGET} -L${objdir} \
${SIM_CRT0} test.o \
-o mvme-test.x ${LIBS_FOR_TARGET} -lc ${MVME_BSP}
mvme-test.dis: mvme-test.x
${OBJDUMP} -d mvme-test.x > mvme-test.dis
mvme-test.srec: mvme-test.x
${OBJCOPY} -O srec mvme-test.x mvme-test.srec
sol-test: sol-test.x sol-test.dis sol-test.srec
sol-test.x: test.o ${SOLARIS_CRT0} ${SOLARIS_BSP}
${CC} ${LDFLAGS_FOR_TARGET} -L${objdir} \
${SIM_CRT0} test.o \
-o sol-test.x ${LIBS_FOR_TARGET} -lc ${SOLARIS_BSP}
sol-test.dis: sol-test.x
${OBJDUMP} -d sol-test.x > sol-test.dis
sol-test.srec: sol-test.x
${OBJCOPY} -O srec sol-test.x sol-test.srec
linux-test: linux-test.x linux-test.dis linux-test.srec
linux-test.x: test.o ${LINUX_CRT0} ${LINUX_BSP}
${CC} ${LDFLAGS_FOR_TARGET} -L${objdir} \
${SIM_CRT0} test.o \
-o linux-test.x ${LIBS_FOR_TARGET} -lc ${LINUX_BSP}
linux-test.dis: linux-test.x
${OBJDUMP} -d linux-test.x > linux-test.dis
linux-test.srec: linux-test.x
${OBJCOPY} -O srec linux-test.x linux-test.srec
yellowknife-test: yellowknife-test.x yellowknife-test.dis yellowknife-test.srec
yellowknife-test.x: test.o ${YELLOWKNIFE_CRT0} ${YELLOWKNIFE_BSP}
${CC} ${LDFLAGS_FOR_TARGET} -L${objdir} \
-T${srcdir}/yellowknife.ld ${YELLOWKNIFE_CRT0} test.o \
-o yellowknife-test.x $(LIBS_FOR_TARGET) ${YELLOWKNIFE_BSP} -lc ${YELLOWKNIFE_BSP}
yellowknife-test.dis: yellowknife-test.x
${OBJDUMP} -d yellowknife-test.x > yellowknife-test.dis
yellowknife-test.srec: yellowknife-test.x
${OBJCOPY} -O srec yellowknife-test.x yellowknife-test.srec
ads-test: ads-test.x ads-test.dis ads-test.srec
ads-test.x: test.o ${ADS_CRT0} ${ADS_BSP}
${CC} ${LDFLAGS_FOR_TARGET} -L${objdir} \
-T${srcdir}/ads.ld ${ADS_CRT0} test.o \
-o ads-test.x $(LIBS_FOR_TARGET) ${ADS_BSP} -lc ${ADS_BSP}
ads-test.dis: ads-test.x
${OBJDUMP} -d ads-test.x > ads-test.dis
ads-test.srec: ads-test.x
${OBJCOPY} -O srec ads-test.x ads-test.srec
mbx-test: mbx-test.x mbx-test.dis mbx-test.srec
mbx-test.x: test.o ${MBX_CRT0} ${MBX_BSP}
${CC} ${LDFLAGS_FOR_TARGET} -L${objdir} \
-T${srcdir}/mbx.ld ${MBX_CRT0} test.o \
-o mbx-test.x $(LIBS_FOR_TARGET) ${MBX_BSP} -lc ${MBX_BSP}
mbx-test.dis: mbx-test.x
${OBJDUMP} -d mbx-test.x > mbx-test.dis
mbx-test.srec: mbx-test.x
${OBJCOPY} -O srec mbx-test.x mbx-test.srec
#
#
#
crt0.o: crt0.S
simulator.o: simulator.S
sim-getrusage.o: sim-getrusage.S
sim-crt0.o: sim-crt0.S
mount.o: mount.S
mvme-exit.o: mvme-exit.S
mvme-inbyte.o: mvme-inbyte.S
mvme-outbyte.o: mvme-outbyte.S
ads-exit.o: ads-exit.S
ads-io.o: ads-io.c
mbx-exit.o: mbx-exit.c
mbx-inbyte.o: mbx-inbyte.c
mbx-outbyte.o: mbx-outbyte.c
mbx-print.o: mbx-print.c
sol-cfuncs.o: sol-cfuncs.c
sol-syscall.o: sol-syscall.S
close.o: $(srcdir)/../close.c
fstat.o: $(srcdir)/../fstat.c
getpid.o: $(srcdir)/../getpid.c
isatty.o: $(srcdir)/../isatty.c
kill.o: $(srcdir)/../kill.c
lseek.o: $(srcdir)/../lseek.c
open.o: $(srcdir)/../open.c
putnum.o: $(srcdir)/../putnum.c
sbrk.o: $(srcdir)/../sbrk.c
stat.o: $(srcdir)/../stat.c
unlink.o: $(srcdir)/../unlink.c
# Don't optimize when compiling the test program, makes confusion in
# the debugger.
test.o: $(srcdir)/test.c
$(CC) -g $(CFLAGS_MRELOCATABLE) $(INCLUDES) -c $(CFLAGS) $<
clean mostlyclean:
rm -f a.out core *.i *.o *-test *.srec *.dis *.x
distclean maintainer-clean realclean: clean
rm -f Makefile config.status *~
.PHONY: install info install-info clean-info
install: ${SIM_INSTALL} ${MVME_INSTALL} ${SOLARIS_INSTALL} ${LINUX_INSTALL} ${YELLOWKNIFE_INSTALL} ${ADS_INSTALL} ${MBX_INSTALL}
install-sim:
set -e; for x in ${SIM_CRT0} ${SIM_BSP} ${SIM_SCRIPTS}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
install-mvme:
set -e; for x in ${MVME_CRT0} ${MVME_BSP} ${MVME_SCRIPTS}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
install-solaris:
set -e; for x in ${SOLARIS_CRT0} ${SOLARIS_BSP} ${SOLARIS_SCRIPTS}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
install-linux:
set -e; for x in ${LINUX_CRT0} ${LINUX_BSP} ${LINUX_SCRIPTS}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
install-yellowknife:
set -e; for x in ${YELLOWKNIFE_CRT0} ${YELLOWKNIFE_BSP}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
set -e; for x in ${YELLOWKNIFE_SCRIPTS}; do ${INSTALL_DATA} $(srcdir)/$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
install-ads:
set -e; for x in ${ADS_CRT0} ${ADS_BSP}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
set -e; for x in ${ADS_SCRIPTS}; do ${INSTALL_DATA} $(srcdir)/$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
install-mbx:
set -e; for x in ${MBX_CRT0} ${MBX_BSP}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
set -e; for x in ${MBX_SCRIPTS} ${MBX_SPECS}; do ${INSTALL_DATA} $(srcdir)/$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
doc:
info:
install-info:
clean-info:
Makefile: Makefile.in config.status @host_makefile_frag_path@
$(SHELL) config.status
config.status: configure
$(SHELL) config.status --recheck
Go to most recent revision | Compare with Previous | Blame | View Log