URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.17.0/] [libgloss/] [sparc/] [salib-701.c] - Rev 455
Go to most recent revision | Compare with Previous | Blame | View Log
/* Stand-alone library for Sparclet 701 board * * Copyright (c) 1996 Cygnus Support * * The authors hereby grant permission to use, copy, modify, distribute, * and license this software and its documentation for any purpose, provided * that existing copyright notices are retained in all copies and that this * notice is included verbatim in any distributions. No written agreement, * license, or royalty fee is required for any of the authorized uses. * Modifications to this software may be copyrighted by their authors * and need not follow the licensing terms described here, provided that * the new terms are clearly indicated on the first page of each file where * they apply. */ #define RAM_BASE ((unsigned char *)0x12000000) /* Start of cacheable dram */ #define DCACHE_LINES 128 /* Number of lines in data cache */ #define DCACHE_LINE_SIZE 16 /* Bytes per data cache line */ #define DCACHE_BANKS 4 /* 4-way associative */ #define CACHE_INST_TAG_ADDR ((unsigned char *)0xc0020000) /* I-Cache tag base address */ #define ALL_BANKS 0x0000f000 /* Selects all 4 cache banks */ #define ICACHE_LINES 128 /* Number of lines in inst cache */ #define ICACHE_LINE_SIZE 32 /* Bytes per inst cache line */ /* I/O Base addresses */ #define CACHE_INST_BASE_ADD 0xc0000000 #define CACHE_DATA_BASE_ADD 0xc8000000 #define _InstrCacheCtlBase 0xc0000000 #define _DataCacheCtlBase 0xc8000000 #define USART_BASE_ADD 0x92000000 #define USART_BASE_ADRS(n) (USART_BASE_ADD + ((n)<<21)) /*0..3*/ /* Serial receiver definitions */ #define USART_RX_CHAR(n) (*(unsigned char *) (USART_BASE_ADRS(n) +(2<<19))) #define USART_RX_CTRL_BASE_ADRS(n) (USART_BASE_ADRS(n)+(3<<19)) #define URSTR(n) (*(unsigned int *) (USART_RX_CTRL_BASE_ADRS(n)+(2<<15))) #define URSTR_CHAR_NUM 0x1f00 /* Bits 8-12 */ /* Serial receiver definitions */ #define USART_TX_CHAR(n) (*(unsigned char *) (USART_BASE_ADRS(n)+3)) #define USART_TX_CTRL_BASE_ADRS(n) (USART_BASE_ADRS(n)+(1<<19)) #define UTSTR(n) (*(unsigned int *) (USART_TX_CTRL_BASE_ADRS(n)+(2<<15))) #define UTSTR_CHAR_FREE 0x1f0 /* Bits 4-8 */ /* Cache definitions */ #define DCCA_NB_LINES 128 /* Nb of lines of the cache */ /* Bank number, used for Cache Memory and Cache Tag */ #define ICCA_B3 0x000008000 /* Bit 15 - 1:Bank3 selected */ #define ICCA_B2 0x000004000 /* Bit 14 - 1:Bank2 selected */ #define ICCA_B1 0x000002000 /* Bit 13 - 1:Bank1 selected */ #define ICCA_B0 0x000001000 /* Bit 12 - 1:Bank0 selected */ /* Register address, show which register is to be checked/updated */ #define ICCACR 0x00000000 /* Bits 17 - 16 - Control register */ #define ICCAMEM 0x00010000 /* Bits 17 - 16 - Cache memory */ #define DCCACR 0x00000000 /* Bits 16 - 15 - Control register */ /* Instruction Cache Controller Register */ #define ICCR_DISABLE 0xfffffffe /* Reset enable bit */ /* Serial I/O routines */ #define STUB_PORT 1 /* 0 = serial port A; 1 = serial port B */ static volatile unsigned char *rx_fifo = &USART_RX_CHAR(STUB_PORT); static volatile unsigned int *rx_status = &URSTR(STUB_PORT); static volatile unsigned char *tx_fifo = &USART_TX_CHAR(STUB_PORT); static volatile unsigned int *tx_status = &UTSTR(STUB_PORT); /* library-free debug reoutines */ #ifdef XDEBUG #define XDBG_MSG(x) pmsg(x) #define XDBG_HEX(x) phex(x) #else #define XDBG_MSG(x) #define XDBG_HEX(x) #endif static int rx_rdy() { return (*rx_status & URSTR_CHAR_NUM); } static unsigned char rx_char() { return *rx_fifo; } void tx_char(char c) { *tx_fifo = c; } static int tx_rdy() { return (*tx_status & UTSTR_CHAR_FREE); } int getDebugChar() { while (!rx_rdy()) ; return rx_char(); } void putDebugChar(int c) { while (!tx_rdy()) ; tx_char(c); } #ifdef XDEBUG /* library-free debug reoutines */ /* print a string */ void pmsg(char *p) { while (*p) { if (*p == '\n') putDebugChar('\r'); putDebugChar(*p++); } } /* print a hex number */ void phex(long x) { char buf[9]; int i; buf[8] = '\0'; for (i = 7; i >= 0; i--) { char c = x & 0x0f; buf[i] = c < 10 ? c + '0' : c - 10 + 'A'; x >>= 4; } pmsg(buf); } #endif /* rdtbr() - read the trap base register */ unsigned long rdtbr(); asm(" .text .align 4 .globl _rdtbr _rdtbr: retl mov %tbr, %o0 "); /* wrtbr() - write the trap base register */ void wrtbr(unsigned long); asm(" .text .align 4 .globl _wrtbr _wrtbr: retl mov %o0, %tbr "); /* Each entry in the trap vector occupies four words. */ struct trap_entry { unsigned sethi_filler:10; unsigned sethi_imm22:22; unsigned jmpl_filler:19; unsigned jmpl_simm13:13; unsigned long filler[2]; }; extern struct trap_entry fltr_proto; asm (" .data .globl _fltr_proto .align 4 _fltr_proto: ! First level trap routine prototype sethi 0, %l0 jmpl 0+%l0, %g0 nop nop .text .align 4 "); /* copy_vectors - Copy the trap vectors from ROM to RAM, set the TBR register to point to the RAM vectors, and return the address of the RAM vectors. */ extern struct trap_entry __trap_vectors[256]; /* defined in matra.ld */ struct trap_entry *copy_vectors() { int i; struct trap_entry *old = (struct trap_entry *) (rdtbr() & ~0xfff); XDBG_MSG("Copying vectors...\n"); for (i = 0; i < 256; i++) __trap_vectors[i] = old[i]; wrtbr ((unsigned long)__trap_vectors); XDBG_MSG("Done\n"); return __trap_vectors; } void disable_cache() { unsigned long *ptr; static unsigned long CACHE_shadow_iccr = 0; /* Because CR cannot be read */ static unsigned long CACHE_shadow_dccr = 0; /* Because CR cannot be read */ XDBG_MSG("Disabling cache...\n"); ptr = (unsigned long*)(CACHE_INST_BASE_ADD | ICCACR); CACHE_shadow_iccr = CACHE_shadow_iccr & ICCR_DISABLE; *ptr = CACHE_shadow_iccr; ptr = (unsigned long*)(CACHE_DATA_BASE_ADD | DCCACR); CACHE_shadow_dccr = CACHE_shadow_dccr & ICCR_DISABLE; *ptr = CACHE_shadow_dccr; XDBG_MSG("Done\n"); } /* Flush the instruction cache. We need to do this for the debugger stub so that breakpoints, et. al. become visible to the instruction stream after storing them in memory. FIXME!! */ void flush_i_cache () { volatile unsigned char *addr; /* First, force all dirty items in the data cache to be moved out to real memory. This is done by making read refs to alternate addresses that will fill up all four banks for each line. Note that we actually have to reference 8 locs per line just in case the region of memory we use is one of the areas that needs to be flushed. */ for (addr = RAM_BASE; addr < RAM_BASE + (DCACHE_LINES * DCACHE_LINE_SIZE * DCACHE_BANKS) * 2; addr += DCACHE_LINE_SIZE) *addr; /* Read the loc */ /* Now, flush the instruction cache. */ for (addr = CACHE_INST_TAG_ADDR + ALL_BANKS; addr <= CACHE_INST_TAG_ADDR + ALL_BANKS + ICACHE_LINES * ICACHE_LINE_SIZE; addr += ICACHE_LINE_SIZE) *(unsigned long *)addr = 0; /* Clr tag entry for all banks on this line */ } /* Setup trap TT to go to ROUTINE. */ void exceptionHandler (int tt, unsigned long routine) { static struct trap_entry *tb; /* Trap vector base address */ if (!tb) { tb = copy_vectors(); /* Copy trap vectors to RAM */ disable_cache(); /* Disable cache FIXME!! */ } XDBG_MSG("Setting exception handler for trap...\n"); tb[tt] = fltr_proto; tb[tt].sethi_imm22 = routine >> 10; tb[tt].jmpl_simm13 = routine & 0x3ff; XDBG_MSG("Done\n"); }
Go to most recent revision | Compare with Previous | Blame | View Log