Subversion Repositories openrisc_me

# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/../../Makefile.shared $(srcdir)/Makefile.in \
        $(srcdir)/Makefile.am
subdir = iconv
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../libtool.m4 \
        $(top_srcdir)/../../ltoptions.m4 \
        $(top_srcdir)/../../ltsugar.m4 \
        $(top_srcdir)/../../ltversion.m4 \
        $(top_srcdir)/../../lt~obsolete.m4 \
        $(top_srcdir)/../acinclude.m4 $(top_srcdir)/../confsubdir.m4 \
        $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        $(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
CONFIG_CLEAN_FILES =
depcomp =
am__depfiles_maybe =
SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
        html-recursive info-recursive install-data-recursive \
        install-exec-recursive install-info-recursive \
        install-recursive installcheck-recursive installdirs-recursive \
        pdf-recursive ps-recursive uninstall-info-recursive \
        uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(cctdir)"
cctDATA_INSTALL = $(INSTALL_DATA)
DATA = $(cct_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CRT0 = @CRT0@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ELIX_LEVEL_0_FALSE = @ELIX_LEVEL_0_FALSE@
ELIX_LEVEL_0_TRUE = @ELIX_LEVEL_0_TRUE@
ELIX_LEVEL_1_FALSE = @ELIX_LEVEL_1_FALSE@
ELIX_LEVEL_1_TRUE = @ELIX_LEVEL_1_TRUE@
ELIX_LEVEL_2_FALSE = @ELIX_LEVEL_2_FALSE@
ELIX_LEVEL_2_TRUE = @ELIX_LEVEL_2_TRUE@
ELIX_LEVEL_3_FALSE = @ELIX_LEVEL_3_FALSE@
ELIX_LEVEL_3_TRUE = @ELIX_LEVEL_3_TRUE@
ELIX_LEVEL_4_FALSE = @ELIX_LEVEL_4_FALSE@
ELIX_LEVEL_4_TRUE = @ELIX_LEVEL_4_TRUE@
ENABLE_NEWLIB_ICONV_FALSE = @ENABLE_NEWLIB_ICONV_FALSE@
ENABLE_NEWLIB_ICONV_TRUE = @ENABLE_NEWLIB_ICONV_TRUE@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAVE_POSIX_DIR_FALSE = @HAVE_POSIX_DIR_FALSE@
HAVE_POSIX_DIR_TRUE = @HAVE_POSIX_DIR_TRUE@
HAVE_SIGNAL_DIR_FALSE = @HAVE_SIGNAL_DIR_FALSE@
HAVE_SIGNAL_DIR_TRUE = @HAVE_SIGNAL_DIR_TRUE@
HAVE_STDIO64_DIR_FALSE = @HAVE_STDIO64_DIR_FALSE@
HAVE_STDIO64_DIR_TRUE = @HAVE_STDIO64_DIR_TRUE@
HAVE_STDIO_DIR_FALSE = @HAVE_STDIO_DIR_FALSE@
HAVE_STDIO_DIR_TRUE = @HAVE_STDIO_DIR_TRUE@
HAVE_SYSCALL_DIR_FALSE = @HAVE_SYSCALL_DIR_FALSE@
HAVE_SYSCALL_DIR_TRUE = @HAVE_SYSCALL_DIR_TRUE@
HAVE_UNIX_DIR_FALSE = @HAVE_UNIX_DIR_FALSE@
HAVE_UNIX_DIR_TRUE = @HAVE_UNIX_DIR_TRUE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBC_EXTRA_DEF = @LIBC_EXTRA_DEF@
LIBC_EXTRA_LIB = @LIBC_EXTRA_LIB@
LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
LIBC_STDIO_DEF = @LIBC_STDIO_DEF@
LIBC_STDIO_LIB = @LIBC_STDIO_LIB@
LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
LIBC_SYS_LIB = @LIBC_SYS_LIB@
LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MAY_SUPPLY_SYSCALLS_FALSE = @MAY_SUPPLY_SYSCALLS_FALSE@
MAY_SUPPLY_SYSCALLS_TRUE = @MAY_SUPPLY_SYSCALLS_TRUE@
NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
READELF = @READELF@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_LIBTOOL_FALSE = @USE_LIBTOOL_FALSE@
USE_LIBTOOL_TRUE = @USE_LIBTOOL_TRUE@
VERSION = @VERSION@
ac_ct_AR = @ac_ct_AR@
ac_ct_AS = @ac_ct_AS@
ac_ct_CC = @ac_ct_CC@
ac_ct_DLLTOOL = @ac_ct_DLLTOOL@
ac_ct_DSYMUTIL = @ac_ct_DSYMUTIL@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_LIPO = @ac_ct_LIPO@
ac_ct_NMEDIT = @ac_ct_NMEDIT@
ac_ct_OBJDUMP = @ac_ct_OBJDUMP@
ac_ct_OTOOL = @ac_ct_OTOOL@
ac_ct_OTOOL64 = @ac_ct_OTOOL64@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_READELF = @ac_ct_READELF@
ac_ct_STRIP = @ac_ct_STRIP@
aext = @aext@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
extra_dir = @extra_dir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libm_machine_dir = @libm_machine_dir@
localstatedir = @localstatedir@
lpfx = @lpfx@
lt_ECHO = @lt_ECHO@
machine_dir = @machine_dir@
mandir = @mandir@
mkdir_p = @mkdir_p@
newlib_basedir = @newlib_basedir@
oext = @oext@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
subdirs = @subdirs@
sys_dir = @sys_dir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
AUTOMAKE_OPTIONS = cygnus
SUBDIRS = ces ccs lib .
cctdir = $(datadir)/iconv_data
cct_DATA = encoding.aliases
INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
SUBDEFS = lib/stmp-def
CHEWOUT_FILES = iconv.def
TARGETDOC = ../tmp.texi
CLEANFILES = $(CHEWOUT_FILES) *.ref
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../../Makefile.shared $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
              cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
                && exit 0; \
              exit 1;; \
          esac; \
        done; \
        echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus  iconv/Makefile'; \
        cd $(top_srcdir) && \
          $(AUTOMAKE) --cygnus  iconv/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
        @case '$?' in \
          *config.status*) \
            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
          *) \
            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
        -rm -f *.lo

clean-libtool:
        -rm -rf .libs _libs

distclean-libtool:
        -rm -f libtool
uninstall-info-am:
install-cctDATA: $(cct_DATA)
        @$(NORMAL_INSTALL)
        test -z "$(cctdir)" || $(mkdir_p) "$(DESTDIR)$(cctdir)"
        @list='$(cct_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f=$(am__strip_dir) \
          echo " $(cctDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(cctdir)/$$f'"; \
          $(cctDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(cctdir)/$$f"; \
        done

uninstall-cctDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(cct_DATA)'; for p in $$list; do \
          f=$(am__strip_dir) \
          echo " rm -f '$(DESTDIR)$(cctdir)/$$f'"; \
          rm -f "$(DESTDIR)$(cctdir)/$$f"; \
        done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
        @failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        target=`echo $@ | sed s/-recursive//`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            dot_seen=yes; \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done; \
        if test "$$dot_seen" = "no"; then \
          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
        @failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        case "$@" in \
          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
          *) list='$(SUBDIRS)' ;; \
        esac; \
        rev=''; for subdir in $$list; do \
          if test "$$subdir" = "."; then :; else \
            rev="$$subdir $$rev"; \
          fi; \
        done; \
        rev="$$rev ."; \
        target=`echo $@ | sed s/-recursive//`; \
        for subdir in $$rev; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done && test -z "$$fail"
tags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
        done
ctags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
        done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '    { files[$$0] = 1; } \
               END { for (i in files) print i; }'`; \
        mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        tags=; \
        here=`pwd`; \
        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
          include_option=--etags-include; \
          empty_fix=.; \
        else \
          include_option=--include; \
          empty_fix=; \
        fi; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test ! -f $$subdir/TAGS || \
              tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
          fi; \
        done; \
        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '    { files[$$0] = 1; } \
               END { for (i in files) print i; }'`; \
        if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
          test -n "$$unique" || unique=$$empty_fix; \
          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
            $$tags $$unique; \
        fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        tags=; \
        here=`pwd`; \
        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '    { files[$$0] = 1; } \
               END { for (i in files) print i; }'`; \
        test -z "$(CTAGS_ARGS)$$tags$$unique" \
          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
             $$tags $$unique

GTAGS:
        here=`$(am__cd) $(top_builddir) && pwd` \
          && cd $(top_srcdir) \
          && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-am:
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
        for dir in "$(DESTDIR)$(cctdir)"; do \
          test -z "$$dir" || $(mkdir_p) "$$dir"; \
        done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
          `test -z '$(STRIP)' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
        -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
        -rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
        distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-cctDATA

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
        -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-cctDATA

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
        clean clean-generic clean-libtool clean-recursive ctags \
        ctags-recursive distclean distclean-generic distclean-libtool \
        distclean-recursive distclean-tags dvi dvi-am html html-am \
        info info-am install install-am install-cctDATA install-data \
        install-data-am install-exec install-exec-am install-info \
        install-info-am install-man install-strip installcheck \
        installcheck-am installdirs installdirs-am maintainer-clean \
        maintainer-clean-generic maintainer-clean-recursive \
        mostlyclean mostlyclean-generic mostlyclean-libtool \
        mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
        uninstall uninstall-am uninstall-cctDATA uninstall-info-am

objectlist.awk.in: $(noinst_LTLIBRARIES)
        -rm -f objectlist.awk.in
        for i in `ls *.lo` ; \
        do \
          echo $$i `pwd`/$$i >> objectlist.awk.in ; \
        done

iconv.def: lib/iconv.def
        cp lib/iconv.def iconv.def

stmp-def: force
        (cd lib && make doc)
        touch $@

.PHONY: force
force:

$(SUBDEFS): stmp-def

lib/iconv.def: $(SUBDEFS); @true

lib/stmp-def: ; @true

doc: $(CHEWOUT_FILES)
        cat $(srcdir)/iconv.tex >> $(TARGETDOC)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: