URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.17.0/] [newlib/] [libc/] [machine/] [i960/] [strncat.S] - Rev 158
Compare with Previous | Blame | View Log
/*******************************************************************************
*
* Copyright (c) 1993 Intel Corporation
*
* Intel hereby grants you permission to copy, modify, and distribute this
* software and its documentation. Intel grants this permission provided
* that the above copyright notice appears in all copies and that both the
* copyright notice and this permission notice appear in supporting
* documentation. In addition, Intel grants this permission provided that
* you prominently mark as "not part of the original" any modifications
* made to this software or documentation, and that the name of Intel
* Corporation not be used in advertising or publicity pertaining to
* distribution of the software or the documentation without specific,
* written prior permission.
*
* Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR
* IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY
* OR FITNESS FOR A PARTICULAR PURPOSE. Intel makes no guarantee or
* representations regarding the use of, or the results of the use of,
* the software and documentation in terms of correctness, accuracy,
* reliability, currentness, or otherwise; and you rely on the software,
* documentation and results solely at your own risk.
*
* IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS,
* LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
* OF ANY KIND. IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM
* PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER.
*
******************************************************************************/
.file "strncat.s"
#ifdef __PIC
.pic
#endif
#ifdef __PID
.pid
#endif
/*
* (c) copyright 1988,1993 Intel Corp., all rights reserved
*/
/*
procedure strncat (optimized assembler version for the 80960K Series)
dest_addr = strncat (dest_addr, src_addr, max_bytes)
append the null terminated string pointed to by src_addr to the null
terminated string pointed to by dest_addr. Return the original
dest_addr. If the source string is longer than max_bytes, then
append only max_bytes bytes, and tack on a null byte on the end.
This routine will fail if the source and destination string
overlap (in particular, if the end of the source is overlapped
by the beginning of the destination). The behavior is undefined.
This is acceptable according to the draft C standard.
Undefined behavior will also occur if the end of the source string
(i.e. the terminating null byte) is in the last two words of the
program's allocated memory space. This is so because strncat fetches
ahead. Disallowing the fetch ahead would impose a severe performance
penalty.
Strategy:
First, skip to the null byte in the destination string. Then
fetch the source string by words and store them by words to the
destination string, until there are fewer than three bytes left
to copy. Then, using the last word of the source (the one that
contains the remaining 0, 1, 2, or 3 bytes to be copied), store
a byte at a time until Ldone.
If, before exhausting the max_byte count, the null byte is encountered
in the source string, then just copy up thru the null byte.
Tactics:
1) Do NOT try to fetch and store the words in a word aligned manner
because, in my judgement, the performance degradation experienced due
to non-aligned accesses does NOT outweigh the time and complexity added
by the preamble and convoluted body that would be necessary to assure
alignment.
*/
.globl _strncat
.globl __strncat
.leafproc _strncat,__strncat
.align 2
_strncat:
#ifndef __PIC
lda Lrett,g14
#else
lda Lrett-(.+8)(ip),g14
#endif
__strncat:
mov g14,g6
cmpibge 0, g2, Lno_operation # Lexit early if max_bytes <= 0
mov g0, g5
Lskip_word_loop:
ld (g5), g7 # fetch word of dest string
addo 4, g5, g5 # post-increment dest ptr
scanbyte 0, g7 # does it contain null byte?
bno Lskip_word_loop # if not, loop
subo 5, g5, g5 # adjust dest ptr
lda 0xff, g3 # byte extraction mask = 0xff;
Lskip_byte_loop:
and g7, g3, g14 # extract byte of last word of dest string
cmpo 0, g14 # is it null?
addo 1, g5, g5 # adjust dest ptr
shro 8, g7, g7 # position next byte for extraction
bne Lskip_byte_loop # loop if null not found yet
ld (g1), g7 # fetch first word of source string
Lwloop: # word copying loop
cmpo 4, g2 # max_bytes < 4 ?
addo 4, g1, g1 # post-increment source ptr
bge Lcloop.a # branch if less than 4 bytes to move
scanbyte 0, g7 # is null byte reached yet?
mov g7, g4 # keep a copy of the source word
be Lcloop # branch if null byte reached
ld (g1), g7 # pre-fetch next word of source
subo 4, g2, g2 # reduce max_byte counter
st g4, (g5) # store current word
addo 4, g5, g5 # post-increment destination ptr
b Lwloop
Lcloop.b:
addo 1, g5, g5 # post-increment destination ptr
shro 8, g7, g7 # position next byte for extraction
Lcloop: # character copying loop (max_byte > 3)
and g3, g7, g4 # extract character
cmpo 0, g4 # is it null?
stob g4, (g5) # store it
bne Lcloop.b # loop if null not encountered yet
bx (g6) # g0 = dest string address; g14 = 0
Lrett:
ret
Lcloop.c:
addo 1, g5, g5 # post-increment destination ptr
shro 8, g7, g7 # position next byte for extraction
Lcloop.a: # character copying loop (max_byte <= 3)
cmpdeco 0,g2,g2 # max_byte == 0?
and g3, g7, g4 # extract character
be Ldone # store null and Lexit if max_byte exhausted
cmpo 0, g4 # is it null?
stob g4, (g5) # store it
bne Lcloop.c # loop if null not encountered yet
Ldone: stob g14, (g5) # store trailing null
bx (g6) # g0 = dest string address; g14 = 0
Lno_operation: mov 0, g14 # conform to register conventions
bx (g6)
/* end of strncat */