OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.18.0/] [libgloss/] [arm/] [swi.h] - Rev 258

Go to most recent revision | Compare with Previous | Blame | View Log

/* SWI numbers for RDP (Demon) monitor.  */
#define SWI_WriteC                 0x0
#define SWI_Write0                 0x2
#define SWI_ReadC                  0x4
#define SWI_CLI                    0x5
#define SWI_GetEnv                 0x10
#define SWI_Exit                   0x11
#define SWI_EnterOS                0x16
 
#define SWI_GetErrno               0x60
#define SWI_Clock                  0x61
#define SWI_Time                   0x63
#define SWI_Remove                 0x64
#define SWI_Rename                 0x65
#define SWI_Open                   0x66
 
#define SWI_Close                  0x68
#define SWI_Write                  0x69
#define SWI_Read                   0x6a
#define SWI_Seek                   0x6b
#define SWI_Flen                   0x6c
 
#define SWI_IsTTY                  0x6e
#define SWI_TmpNam                 0x6f
#define SWI_InstallHandler         0x70
#define SWI_GenerateError          0x71
 
 
/* Now the SWI numbers and reason codes for RDI (Angel) monitors.  */
#define AngelSWI_ARM 			0x123456
#ifdef __thumb__
#define AngelSWI 			0xAB
#else
#define AngelSWI 			AngelSWI_ARM
#endif
/* For Thumb-2 code use the BKPT instruction instead of SWI.  */
#ifdef __thumb2__
#define AngelSWIInsn			"bkpt"
#define AngelSWIAsm			bkpt
#else
#define AngelSWIInsn			"swi"
#define AngelSWIAsm			swi
#endif
 
/* The reason codes:  */
#define AngelSWI_Reason_Open		0x01
#define AngelSWI_Reason_Close		0x02
#define AngelSWI_Reason_WriteC		0x03
#define AngelSWI_Reason_Write0		0x04
#define AngelSWI_Reason_Write		0x05
#define AngelSWI_Reason_Read		0x06
#define AngelSWI_Reason_ReadC		0x07
#define AngelSWI_Reason_IsTTY		0x09
#define AngelSWI_Reason_Seek		0x0A
#define AngelSWI_Reason_FLen		0x0C
#define AngelSWI_Reason_TmpNam		0x0D
#define AngelSWI_Reason_Remove		0x0E
#define AngelSWI_Reason_Rename		0x0F
#define AngelSWI_Reason_Clock		0x10
#define AngelSWI_Reason_Time		0x11
#define AngelSWI_Reason_System		0x12
#define AngelSWI_Reason_Errno		0x13
#define AngelSWI_Reason_GetCmdLine 	0x15
#define AngelSWI_Reason_HeapInfo 	0x16
#define AngelSWI_Reason_EnterSVC 	0x17
#define AngelSWI_Reason_ReportException 0x18
#define ADP_Stopped_ApplicationExit 	((2 << 16) + 38)
#define ADP_Stopped_RunTimeError 	((2 << 16) + 35)
 
#if defined(ARM_RDI_MONITOR) && !defined(__ASSEMBLER__)
 
static inline int
do_AngelSWI (int reason, void * arg)
{
  int value;
  asm volatile ("mov r0, %1; mov r1, %2; " AngelSWIInsn " %a3; mov %0, r0"
       : "=r" (value) /* Outputs */
       : "r" (reason), "r" (arg), "i" (AngelSWI) /* Inputs */
       : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc"
		/* Clobbers r0 and r1, and lr if in supervisor mode */);
                /* Accordingly to page 13-77 of ARM DUI 0040D other registers
                   can also be clobbered.  Some memory positions may also be
                   changed by a system call, so they should not be kept in
                   registers. Note: we are assuming the manual is right and
                   Angel is respecting the APCS.  */
  return value;
}
 
#endif
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.