URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.18.0/] [libgloss/] [bfin/] [include/] [defBF514.h] - Rev 309
Go to most recent revision | Compare with Previous | Blame | View Log
/* * The authors hereby grant permission to use, copy, modify, distribute, * and license this software and its documentation for any purpose, provided * that existing copyright notices are retained in all copies and that this * notice is included verbatim in any distributions. No written agreement, * license, or royalty fee is required for any of the authorized uses. * Modifications to this software may be copyrighted by their authors * and need not follow the licensing terms described here, provided that * the new terms are clearly indicated on the first page of each file where * they apply. */ /* ** Copyright (C) 2009 Analog Devices, Inc. ** ************************************************************************************ ** ** This include file contains a list of macro "defines" to enable the programmer ** to use symbolic names for register-access and bit-manipulation. ** **/ #ifndef _DEF_BF514_H #define _DEF_BF514_H /* Include all Core registers and bit definitions */ #include <def_LPBlackfin.h> /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */ /* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ #include <defBF51x_base.h> #ifdef _MISRA_RULES #pragma diag(push) #pragma diag(suppress:misra_rule_19_4:"macros violate rule 19.4") #endif /* _MISRA_RULES */ /* The following are the #defines needed by ADSP-BF514 that are not in the common header */ /* RSI Registers */ #define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_PWR_CTL RSI_PWR_CONTROL /* SDH Power Control */ #define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_CLK_CTL RSI_CLK_CONTROL /* SDH Clock Control */ #define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_ARGUMENT RSI_ARGUMENT /* SDH Argument */ #define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_COMMAND RSI_COMMAND /* SDH Command */ #define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_RESP_CMD RSI_RESP_CMD /* SDH Response Command */ #define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_RESPONSE0 RSI_RESPONSE0 /* SDH Response0 */ #define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_RESPONSE1 RSI_RESPONSE1 /* SDH Response1 */ #define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_RESPONSE2 RSI_RESPONSE2 /* SDH Response2 */ #define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_RESPONSE3 RSI_RESPONSE3 /* SDH Response3 */ #define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_DATA_TIMER RSI_DATA_TIMER /* SDH Data Timer */ #define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_DATA_LGTH RSI_DATA_LGTH /* SDH Data Length */ #define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_DATA_CTL RSI_DATA_CONTROL /* SDH Data Control */ #define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_DATA_CNT RSI_DATA_CNT /* SDH Data Counter */ #define RSI_STATUS 0xFFC03834 /* RSI Status Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_STATUS RSI_STATUS /* SDH Status */ #define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_STATUS_CLR RSI_STATUSCL /* SDH Status Clear */ #define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_MASK0 RSI_MASK0 /* SDH Interrupt0 Mask */ #define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_MASK1 RSI_MASK1 /* SDH Interrupt1 Mask */ #define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_FIFO_CNT RSI_FIFO_CNT /* SDH FIFO Counter */ #define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ #define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_FIFO RSI_FIFO /* SDH Data FIFO */ #define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_E_STATUS RSI_ESTAT /* SDH Exception Status */ #define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_E_MASK RSI_EMASK /* SDH Exception Mask */ #define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_CFG RSI_CONFIG /* SDH Configuration */ #define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_RD_WAIT_EN RSI_RD_WAIT_EN /* SDH Read Wait Enable */ #define RSI_PID0 0xFFC038D0 /* RSI Peripheral ID Register 0 */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_PID0 RSI_PID0 /* SDH Peripheral Identification0 */ #define RSI_PID1 0xFFC038D4 /* RSI Peripheral ID Register 1 */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_PID1 RSI_PID1 /* SDH Peripheral Identification1 */ #define RSI_PID2 0xFFC038D8 /* RSI Peripheral ID Register 2 */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_PID2 RSI_PID2 /* SDH Peripheral Identification2 */ #define RSI_PID3 0xFFC038DC /* RSI Peripheral ID Register 3 */ /* legacy register name (below) provided for backwards code compatibility */ #define SDH_PID3 RSI_PID3 /* SDH Peripheral Identification3 */ /* RSI Registers */ /* ********************************************************** */ /* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ /* and MULTI BIT READ MACROS */ /* ********************************************************** */ /* Bit masks for RSI_PWR_CONTROL */ #define PWR_ON 0x3 /* Power On */ #define RSI_CMD_OD 0x40 /* Open Drain Output */ /* legacy bit mask (below) provided for backwards code compatibility */ #define SD_CMD_OD RSI_CMD_OD /* Open Drain Output */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nSD_CMD_OD 0x0 /* legacy bit mask (below) provided for backwards code compatibility */ #if 0 #define TBD 0x3c /* TBD */ #endif /* legacy bit mask (below) provided for backwards code compatibility */ #define ROD_CTL 0x80 /* legacy bit mask (below) provided for backwards code compatibility */ #define nROD_CTL 0x80 /* Bit masks for RSI_CLK_CONTROL */ #define CLKDIV 0xff /* MC_CLK Divisor */ #define CLK_EN 0x100 /* MC_CLK Bus Clock Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define CLK_E CLK_EN /* MC_CLK Bus Clock Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCLK_E 0x0 #define PWR_SV_EN 0x200 /* Power Save Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define PWR_SV_E PWR_SV_EN /* Power Save Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nPWR_SV_E 0x0 #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCLKDIV_BYPASS 0x0 #define BUS_MODE 0x1800 /* Bus width selection */ /* legacy bit mask (below) provided for backwards code compatibility */ #define WIDE_BUS 0x0800 /* Wide Bus Mode Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nWIDE_BUS 0x0 /* Bit masks for RSI_COMMAND */ #define CMD_IDX 0x3f /* Command Index */ #define CMD_RSP_EN 0x40 /* Response */ /* legacy bit mask (below) provided for backwards code compatibility */ #define CMD_RSP CMD_RSP_EN /* Response */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_RSP 0x0 #define CMD_LRSP_EN 0x80 /* Long Response */ /* legacy bit mask (below) provided for backwards code compatibility */ #define CMD_L_RSP CMD_LRSP_EN /* Long Response */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_L_RSP 0x0 #define CMD_INT_EN 0x100 /* Command Interrupt */ /* legacy bit mask (below) provided for backwards code compatibility */ #define CMD_INT_E CMD_INT_EN /* Command Interrupt */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_INT_E 0x0 #define CMD_PEND_EN 0x200 /* Command Pending */ /* legacy bit mask (below) provided for backwards code compatibility */ #define CMD_PEND_E CMD_PEND_EN /* Command Pending */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_PEND_E 0x0 #define CMD_EN 0x400 /* Command Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define CMD_E CMD_EN /* Command Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_E 0x0 /* Bit masks for RSI_RESP_CMD */ #define RESP_CMD 0x3f /* Response Command */ /* Bit masks for RSI_DATA_LGTH */ #define DATA_LENGTH 0xffff /* Data Length */ /* Bit masks for RSI_DATA_CONTROL */ #define DATA_EN 0x1 /* Data Transfer Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define DTX_E DATA_EN /* Data Transfer Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDTX_E 0x0 #define DATA_DIR 0x2 /* Data Transfer Direction */ /* legacy bit mask (below) provided for backwards code compatibility */ #define DTX_DIR DATA_DIR /* Data Transfer Direction */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDTX_DIR 0x0 #define DATA_MODE 0x4 /* Data Transfer Mode */ /* legacy bit mask (below) provided for backwards code compatibility */ #define DTX_MODE DATA_MODE /* Data Transfer Mode */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDTX_MODE 0x0 #define DATA_DMA_EN 0x8 /* Data Transfer DMA Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDTX_DMA_E 0x0 #define DATA_BLK_LGTH 0xf0 /* Data Transfer Block Length */ /* legacy bit mask (below) provided for backwards code compatibility */ #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ #define CEATA_EN 0x100 /* CE-ATA operation mode enable */ #define CEATA_CCS_EN 0x200 /* CE-ATA CCS mode enable */ /* Bit masks for RSI_DATA_CNT */ #define DATA_COUNT 0xffff /* Data Count */ /* Bit masks for RSI_STATUS */ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_CRC_FAIL 0x0 #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_CRC_FAIL 0x0 #define CMD_TIMEOUT 0x4 /* CMD Time Out */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_TIMEOUT 0x0 #define DAT_TIMEOUT 0x8 /* Data Time Out */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_TIMEOUT 0x0 #define TX_UNDERRUN 0x10 /* Transmit Underrun */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_UNDERRUN 0x0 #define RX_OVERRUN 0x20 /* Receive Overrun */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_OVERRUN 0x0 #define CMD_RESP_END 0x40 /* CMD Response End */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_RESP_END 0x0 #define CMD_SENT 0x80 /* CMD Sent */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_SENT 0x0 #define DAT_END 0x100 /* Data End */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_END 0x0 #define START_BIT_ERR 0x200 /* Start Bit Error */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nSTART_BIT_ERR 0x0 #define DAT_BLK_END 0x400 /* Data Block End */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_BLK_END 0x0 #define CMD_ACT 0x800 /* CMD Active */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_ACT 0x0 #define TX_ACT 0x1000 /* Transmit Active */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_ACT 0x0 #define RX_ACT 0x2000 /* Receive Active */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_ACT 0x0 #define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_FIFO_STAT 0x0 #define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_FIFO_STAT 0x0 #define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_FIFO_FULL 0x0 #define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_FIFO_FULL 0x0 #define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_FIFO_ZERO 0x0 #define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_DAT_ZERO 0x0 #define TX_DAT_RDY 0x100000 /* Transmit Data Available */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_DAT_RDY 0x0 #define RX_FIFO_RDY 0x200000 /* Receive Data Available */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_FIFO_RDY 0x0 /* Bit masks for RSI_STATCL */ #define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_CRC_FAIL_STAT 0x0 #define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_CRC_FAIL_STAT 0x0 #define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_TIMEOUT_STAT 0x0 #define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_TIMEOUT_STAT 0x0 #define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_UNDERRUN_STAT 0x0 #define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_OVERRUN_STAT 0x0 #define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_RESP_END_STAT 0x0 #define CMD_SENT_STAT 0x80 /* CMD Sent Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_SENT_STAT 0x0 #define DAT_END_STAT 0x100 /* Data End Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_END_STAT 0x0 #define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nSTART_BIT_ERR_STAT 0x0 #define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_BLK_END_STAT 0x0 /* Bit masks for RSI_MASKx */ #define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_CRC_FAIL_MASK 0x0 #define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_CRC_FAIL_MASK 0x0 #define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_TIMEOUT_MASK 0x0 #define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_TIMEOUT_MASK 0x0 #define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_UNDERRUN_MASK 0x0 #define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_OVERRUN_MASK 0x0 #define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_RESP_END_MASK 0x0 #define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_SENT_MASK 0x0 #define DAT_END_MASK 0x100 /* Data End Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_END_MASK 0x0 #define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nSTART_BIT_ERR_MASK 0x0 #define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nDAT_BLK_END_MASK 0x0 #define CMD_ACT_MASK 0x800 /* CMD Active Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCMD_ACT_MASK 0x0 #define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_ACT_MASK 0x0 #define RX_ACT_MASK 0x2000 /* Receive Active Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_ACT_MASK 0x0 #define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_FIFO_STAT_MASK 0x0 #define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_FIFO_STAT_MASK 0x0 #define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_FIFO_FULL_MASK 0x0 #define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_FIFO_FULL_MASK 0x0 #define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_FIFO_ZERO_MASK 0x0 #define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_DAT_ZERO_MASK 0x0 #define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nTX_DAT_RDY_MASK 0x0 #define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRX_FIFO_RDY_MASK 0x0 /* Bit masks for RSI_FIFO_CNT */ #define FIFO_COUNT 0x7fff /* FIFO Count */ /* Bit masks for RSI_CEATA_CONTROL */ #define CEATA_TX_CCSD 0x1 /* Send CE-ATA CCSD sequence */ /* Bit masks for RSI_ESTAT */ #define SDIO_INT_DET 0x2 /* SDIO Int Detected */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nSDIO_INT_DET 0x0 #define SD_CARD_DET 0x10 /* SD Card Detect */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nSD_CARD_DET 0x0 #define CEATA_INT_DET 0x20 /* Bit masks for RSI_EMASK */ #define SDIO_INT_DET_MASK 0x2 /* Mask SDIO Int Detected */ /* legacy bit mask (below) provided for backwards code compatibility */ #define SDIO_MSK SDIO_INT_DET_MASK /* Mask SDIO Int Detected */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nSDIO_MSK 0x0 #define SD_CARD_DET_MASK 0x10 /* Mask Card Detect */ /* legacy bit mask (below) provided for backwards code compatibility */ #define SCD_MASK SD_CARD_DET_MASK /* Mask Card Detect */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nSCD_MSK 0x0 #define CEATA_INT_DET_MASK 0x20 /* Bit masks for RSI_CFG */ /* Left in for backwards compatibility */ #define RSI_CLK_EN 0x1 /* legacy bit mask (below) provided for backwards code compatibility */ #define CLKS_EN RSI_CLK_EN /* Clocks Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nCLKS_EN 0x0 #define SDIO4_EN 0x4 /* SDIO 4-Bit Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define SD4E SDIO4_EN /* SDIO 4-Bit Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nSD4E 0x0 #define MW_EN 0x8 /* Moving Window Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define MWE MW_EN /* Moving Window Enable */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nMWE 0x0 #define RSI_RST 0x10 /* SDMMC Reset */ /* legacy bit mask (below) provided for backwards code compatibility */ #define SD_RST RSI_RST /* SDMMC Reset */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nSD_RST 0x0 #define PU_DAT 0x20 /* Pull-up SD_DAT */ /* legacy bit mask (below) provided for backwards code compatibility */ #define PUP_SDDAT PU_DAT /* Pull-up SD_DAT */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nPUP_SDDAT 0x0 #define PU_DAT3 0x40 /* Pull-up SD_DAT3 */ /* legacy bit mask (below) provided for backwards code compatibility */ #define PUP_SDDAT3 PU_DAT3 /* Pull-up SD_DAT3 */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nPUP_SDDAT3 0x0 #define PD_DAT3 0x80 /* Pull-down SD_DAT3 */ /* legacy bit mask (below) provided for backwards code compatibility */ #define PD_SDDAT3 PD_DAT3 /* Pull-down SD_DAT3 */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nPD_SDDAT3 0x0 /* Bit masks for RSI_RD_WAIT_EN */ #define SDIO_RWR 0x1 /* Read Wait Request */ /* legacy bit mask (below) provided for backwards code compatibility */ #define RWR SDIO_RWR /* Read Wait Request */ /* legacy bit mask (below) provided for backwards code compatibility */ #define nRWR 0x0 /* Bit masks for RSI_PIDx */ #define RSI_PID 0xff /* RSI Peripheral ID */ #ifdef _MISRA_RULES #pragma diag(pop) #endif /* _MISRA_RULES */ #endif /* _DEF_BF514_H */
Go to most recent revision | Compare with Previous | Blame | View Log