URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.18.0/] [libgloss/] [bfin/] [include/] [defBF534.h] - Rev 557
Go to most recent revision | Compare with Previous | Blame | View Log
/* * The authors hereby grant permission to use, copy, modify, distribute, * and license this software and its documentation for any purpose, provided * that existing copyright notices are retained in all copies and that this * notice is included verbatim in any distributions. No written agreement, * license, or royalty fee is required for any of the authorized uses. * Modifications to this software may be copyrighted by their authors * and need not follow the licensing terms described here, provided that * the new terms are clearly indicated on the first page of each file where * they apply. */ /* ** Copyright (C) 2008, 2009 Analog Devices, Inc. ** ************************************************************************************ ** ** This include file contains a list of macro "defines" to enable the programmer ** to use symbolic names for register-access and bit-manipulation. ** **/ #ifndef _DEF_BF534_H #define _DEF_BF534_H /* Include all Core registers and bit definitions */ #include <def_LPBlackfin.h> #ifdef _MISRA_RULES #pragma diag(push) #pragma diag(suppress:misra_rule_19_4:"ADI header allows any substitution") #pragma diag(suppress:misra_rule_19_7:"ADI header allows function macros") #endif /* _MISRA_RULES */ /************************************************************************************ ** System MMR Register Map *************************************************************************************/ /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ #define PLL_CTL 0xFFC00000 /* PLL Control Register */ #define PLL_DIV 0xFFC00004 /* PLL Divide Register */ #define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ #define PLL_STAT 0xFFC0000C /* PLL Status Register */ #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ #define CHIPID 0xFFC00014 /* Device ID Register */ /* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ #define SWRST 0xFFC00100 /* Software Reset Register */ #define SYSCR 0xFFC00104 /* System Configuration Register */ #define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ #define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ #define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ #define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ #define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ #define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ #define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ /* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ #define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ #define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ #define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ /* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ #define RTC_STAT 0xFFC00300 /* RTC Status Register */ #define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ #define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ #define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ #define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ #define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ #define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ /* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ #define UART0_THR 0xFFC00400 /* Transmit Holding register */ #define UART0_RBR 0xFFC00400 /* Receive Buffer register */ #define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ #define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ #define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ #define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ #define UART0_LCR 0xFFC0040C /* Line Control Register */ #define UART0_MCR 0xFFC00410 /* Modem Control Register */ #define UART0_LSR 0xFFC00414 /* Line Status Register */ #define UART0_MSR 0xFFC00418 /* Modem Status Register */ #define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ #define UART0_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ #define SPI_CTL 0xFFC00500 /* SPI Control Register */ #define SPI_FLG 0xFFC00504 /* SPI Flag register */ #define SPI_STAT 0xFFC00508 /* SPI Status register */ #define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ #define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ #define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ #define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ /* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ #define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ #define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ #define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ #define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ #define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ #define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ #define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ #define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ #define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ #define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ #define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ #define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ #define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ #define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ #define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ #define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ #define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ #define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ #define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ #define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ #define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ #define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ #define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ #define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ #define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ #define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ #define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ #define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ #define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ #define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ #define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ #define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ #define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ #define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ #define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ /* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ #define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ #define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ #define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ #define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ #define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ #define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ #define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ #define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ #define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ #define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ #define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ #define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ #define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ #define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ #define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ #define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ #define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ /* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ #define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ #define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ #define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ #define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ #define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ #define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ #define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ #define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ #define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ #define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ #define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ #define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ #define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ #define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ #define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ #define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ #define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ #define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ #define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ #define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ #define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ #define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ /* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ #define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ #define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ #define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ #define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ #define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ #define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ #define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ #define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ #define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ #define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ #define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ #define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ #define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ #define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ #define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ #define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ #define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ #define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ #define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ #define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ #define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ #define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ /* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ #define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ #define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ #define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ #define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ #define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ #define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ #define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ /* DMA Traffic Control Registers */ #define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ #define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ /* Alternate deprecated register names (below) provided for backwards code compatibility */ #define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ #define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ /* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ #define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ #define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ #define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ #define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ #define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ #define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ #define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ #define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ #define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ #define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ #define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ #define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ #define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ #define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ #define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ #define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ #define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ #define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ #define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ #define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ #define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ #define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ #define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ #define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ #define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ #define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ #define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ #define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ #define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ #define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ #define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ #define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ #define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ #define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ #define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ #define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ #define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ #define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ #define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ #define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ #define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ #define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ #define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ #define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ #define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ #define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ #define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ #define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ #define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ #define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ #define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ #define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ #define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ #define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ #define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ #define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ #define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ #define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ #define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ #define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ #define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ #define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ #define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ #define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ #define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ #define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ #define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ #define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ #define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ #define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ #define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ #define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ #define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ #define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ #define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ #define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ #define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ #define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ #define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ #define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ #define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ #define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ #define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ #define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ #define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ #define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ #define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ #define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ #define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ #define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ #define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ #define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ #define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ #define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ #define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ #define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ #define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ #define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ #define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ #define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ #define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ #define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ #define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ #define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ #define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ #define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ #define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ #define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ #define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ #define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ #define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ #define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ #define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ #define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ #define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ #define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ #define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ #define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ #define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ #define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ #define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ #define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ #define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ #define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ #define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ #define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ #define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ #define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ #define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ #define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ #define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ #define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ #define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ #define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ #define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ #define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ #define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ #define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ #define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ #define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ #define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ #define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ #define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ #define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ #define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ #define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ #define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ #define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ #define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ #define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ #define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ #define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ #define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ #define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ #define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ #define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ #define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ #define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ #define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ #define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ #define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ #define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ #define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ #define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ #define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ #define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ #define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ #define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ #define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ #define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ #define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ #define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ #define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ #define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ #define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ #define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ #define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ #define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ #define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ #define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ #define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ #define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ #define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ #define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ #define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ #define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ #define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ #define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ #define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ #define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ #define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ #define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ #define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ #define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ #define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ #define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ #define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ #define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ #define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ #define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ #define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ #define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ #define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ #define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ #define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ #define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ #define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ #define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ /* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ #define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ #define PPI_STATUS 0xFFC01004 /* PPI Status Register */ #define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ #define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ #define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ #define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ #define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ #define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ #define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ #define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ #define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ #define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ #define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ #define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ #define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ #define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ #define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ #define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ #define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ #define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ #define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ #define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ #define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ #define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ #define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ #define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ #define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ #define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ #define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ #define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ #define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ #define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ #define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ #define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ #define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ #define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ #define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ #define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ /* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ #define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ #define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ #define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ #define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ #define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ #define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ #define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ #define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ #define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ #define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ #define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ #define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ #define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ #define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ #define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ #define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ #define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ /* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ #define UART1_THR 0xFFC02000 /* Transmit Holding register */ #define UART1_RBR 0xFFC02000 /* Receive Buffer register */ #define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ #define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ #define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ #define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ #define UART1_LCR 0xFFC0200C /* Line Control Register */ #define UART1_MCR 0xFFC02010 /* Modem Control Register */ #define UART1_LSR 0xFFC02014 /* Line Status Register */ #define UART1_MSR 0xFFC02018 /* Modem Status Register */ #define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ #define UART1_GCTL 0xFFC02024 /* Global Control Register */ /* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */ /* For Mailboxes 0-15 */ #define CAN_MC1 0xFFC02A00 /* Mailbox config reg 1 */ #define CAN_MD1 0xFFC02A04 /* Mailbox direction reg 1 */ #define CAN_TRS1 0xFFC02A08 /* Transmit Request Set reg 1 */ #define CAN_TRR1 0xFFC02A0C /* Transmit Request Reset reg 1 */ #define CAN_TA1 0xFFC02A10 /* Transmit Acknowledge reg 1 */ #define CAN_AA1 0xFFC02A14 /* Transmit Abort Acknowledge reg 1 */ #define CAN_RMP1 0xFFC02A18 /* Receive Message Pending reg 1 */ #define CAN_RML1 0xFFC02A1C /* Receive Message Lost reg 1 */ #define CAN_MBTIF1 0xFFC02A20 /* Mailbox Transmit Interrupt Flag reg 1 */ #define CAN_MBRIF1 0xFFC02A24 /* Mailbox Receive Interrupt Flag reg 1 */ #define CAN_MBIM1 0xFFC02A28 /* Mailbox Interrupt Mask reg 1 */ #define CAN_RFH1 0xFFC02A2C /* Remote Frame Handling reg 1 */ #define CAN_OPSS1 0xFFC02A30 /* Overwrite Protection Single Shot Xmit reg 1 */ /* For Mailboxes 16-31 */ #define CAN_MC2 0xFFC02A40 /* Mailbox config reg 2 */ #define CAN_MD2 0xFFC02A44 /* Mailbox direction reg 2 */ #define CAN_TRS2 0xFFC02A48 /* Transmit Request Set reg 2 */ #define CAN_TRR2 0xFFC02A4C /* Transmit Request Reset reg 2 */ #define CAN_TA2 0xFFC02A50 /* Transmit Acknowledge reg 2 */ #define CAN_AA2 0xFFC02A54 /* Transmit Abort Acknowledge reg 2 */ #define CAN_RMP2 0xFFC02A58 /* Receive Message Pending reg 2 */ #define CAN_RML2 0xFFC02A5C /* Receive Message Lost reg 2 */ #define CAN_MBTIF2 0xFFC02A60 /* Mailbox Transmit Interrupt Flag reg 2 */ #define CAN_MBRIF2 0xFFC02A64 /* Mailbox Receive Interrupt Flag reg 2 */ #define CAN_MBIM2 0xFFC02A68 /* Mailbox Interrupt Mask reg 2 */ #define CAN_RFH2 0xFFC02A6C /* Remote Frame Handling reg 2 */ #define CAN_OPSS2 0xFFC02A70 /* Overwrite Protection Single Shot Xmit reg 2 */ /* CAN Configuration, Control, and Status Registers */ #define CAN_CLOCK 0xFFC02A80 /* Bit Timing Configuration register 0 */ #define CAN_TIMING 0xFFC02A84 /* Bit Timing Configuration register 1 */ #define CAN_DEBUG 0xFFC02A88 /* Debug Register */ #define CAN_STATUS 0xFFC02A8C /* Global Status Register */ #define CAN_CEC 0xFFC02A90 /* Error Counter Register */ #define CAN_GIS 0xFFC02A94 /* Global Interrupt Status Register */ #define CAN_GIM 0xFFC02A98 /* Global Interrupt Mask Register */ #define CAN_GIF 0xFFC02A9C /* Global Interrupt Flag Register */ #define CAN_CONTROL 0xFFC02AA0 /* Master Control Register */ #define CAN_INTR 0xFFC02AA4 /* Interrupt Pending Register */ #define CAN_MBTD 0xFFC02AAC /* Mailbox Temporary Disable Feature */ #define CAN_EWR 0xFFC02AB0 /* Programmable Warning Level */ #define CAN_ESR 0xFFC02AB4 /* Error Status Register */ #define CAN_UCCNT 0xFFC02AC4 /* Universal Counter */ #define CAN_UCRC 0xFFC02AC8 /* Universal Counter Reload/Capture Register */ #define CAN_UCCNF 0xFFC02ACC /* Universal Counter Configuration Register */ /* Mailbox Acceptance Masks */ #define CAN_AM00L 0xFFC02B00 /* Mailbox 0 Low Acceptance Mask */ #define CAN_AM00H 0xFFC02B04 /* Mailbox 0 High Acceptance Mask */ #define CAN_AM01L 0xFFC02B08 /* Mailbox 1 Low Acceptance Mask */ #define CAN_AM01H 0xFFC02B0C /* Mailbox 1 High Acceptance Mask */ #define CAN_AM02L 0xFFC02B10 /* Mailbox 2 Low Acceptance Mask */ #define CAN_AM02H 0xFFC02B14 /* Mailbox 2 High Acceptance Mask */ #define CAN_AM03L 0xFFC02B18 /* Mailbox 3 Low Acceptance Mask */ #define CAN_AM03H 0xFFC02B1C /* Mailbox 3 High Acceptance Mask */ #define CAN_AM04L 0xFFC02B20 /* Mailbox 4 Low Acceptance Mask */ #define CAN_AM04H 0xFFC02B24 /* Mailbox 4 High Acceptance Mask */ #define CAN_AM05L 0xFFC02B28 /* Mailbox 5 Low Acceptance Mask */ #define CAN_AM05H 0xFFC02B2C /* Mailbox 5 High Acceptance Mask */ #define CAN_AM06L 0xFFC02B30 /* Mailbox 6 Low Acceptance Mask */ #define CAN_AM06H 0xFFC02B34 /* Mailbox 6 High Acceptance Mask */ #define CAN_AM07L 0xFFC02B38 /* Mailbox 7 Low Acceptance Mask */ #define CAN_AM07H 0xFFC02B3C /* Mailbox 7 High Acceptance Mask */ #define CAN_AM08L 0xFFC02B40 /* Mailbox 8 Low Acceptance Mask */ #define CAN_AM08H 0xFFC02B44 /* Mailbox 8 High Acceptance Mask */ #define CAN_AM09L 0xFFC02B48 /* Mailbox 9 Low Acceptance Mask */ #define CAN_AM09H 0xFFC02B4C /* Mailbox 9 High Acceptance Mask */ #define CAN_AM10L 0xFFC02B50 /* Mailbox 10 Low Acceptance Mask */ #define CAN_AM10H 0xFFC02B54 /* Mailbox 10 High Acceptance Mask */ #define CAN_AM11L 0xFFC02B58 /* Mailbox 11 Low Acceptance Mask */ #define CAN_AM11H 0xFFC02B5C /* Mailbox 11 High Acceptance Mask */ #define CAN_AM12L 0xFFC02B60 /* Mailbox 12 Low Acceptance Mask */ #define CAN_AM12H 0xFFC02B64 /* Mailbox 12 High Acceptance Mask */ #define CAN_AM13L 0xFFC02B68 /* Mailbox 13 Low Acceptance Mask */ #define CAN_AM13H 0xFFC02B6C /* Mailbox 13 High Acceptance Mask */ #define CAN_AM14L 0xFFC02B70 /* Mailbox 14 Low Acceptance Mask */ #define CAN_AM14H 0xFFC02B74 /* Mailbox 14 High Acceptance Mask */ #define CAN_AM15L 0xFFC02B78 /* Mailbox 15 Low Acceptance Mask */ #define CAN_AM15H 0xFFC02B7C /* Mailbox 15 High Acceptance Mask */ #define CAN_AM16L 0xFFC02B80 /* Mailbox 16 Low Acceptance Mask */ #define CAN_AM16H 0xFFC02B84 /* Mailbox 16 High Acceptance Mask */ #define CAN_AM17L 0xFFC02B88 /* Mailbox 17 Low Acceptance Mask */ #define CAN_AM17H 0xFFC02B8C /* Mailbox 17 High Acceptance Mask */ #define CAN_AM18L 0xFFC02B90 /* Mailbox 18 Low Acceptance Mask */ #define CAN_AM18H 0xFFC02B94 /* Mailbox 18 High Acceptance Mask */ #define CAN_AM19L 0xFFC02B98 /* Mailbox 19 Low Acceptance Mask */ #define CAN_AM19H 0xFFC02B9C /* Mailbox 19 High Acceptance Mask */ #define CAN_AM20L 0xFFC02BA0 /* Mailbox 20 Low Acceptance Mask */ #define CAN_AM20H 0xFFC02BA4 /* Mailbox 20 High Acceptance Mask */ #define CAN_AM21L 0xFFC02BA8 /* Mailbox 21 Low Acceptance Mask */ #define CAN_AM21H 0xFFC02BAC /* Mailbox 21 High Acceptance Mask */ #define CAN_AM22L 0xFFC02BB0 /* Mailbox 22 Low Acceptance Mask */ #define CAN_AM22H 0xFFC02BB4 /* Mailbox 22 High Acceptance Mask */ #define CAN_AM23L 0xFFC02BB8 /* Mailbox 23 Low Acceptance Mask */ #define CAN_AM23H 0xFFC02BBC /* Mailbox 23 High Acceptance Mask */ #define CAN_AM24L 0xFFC02BC0 /* Mailbox 24 Low Acceptance Mask */ #define CAN_AM24H 0xFFC02BC4 /* Mailbox 24 High Acceptance Mask */ #define CAN_AM25L 0xFFC02BC8 /* Mailbox 25 Low Acceptance Mask */ #define CAN_AM25H 0xFFC02BCC /* Mailbox 25 High Acceptance Mask */ #define CAN_AM26L 0xFFC02BD0 /* Mailbox 26 Low Acceptance Mask */ #define CAN_AM26H 0xFFC02BD4 /* Mailbox 26 High Acceptance Mask */ #define CAN_AM27L 0xFFC02BD8 /* Mailbox 27 Low Acceptance Mask */ #define CAN_AM27H 0xFFC02BDC /* Mailbox 27 High Acceptance Mask */ #define CAN_AM28L 0xFFC02BE0 /* Mailbox 28 Low Acceptance Mask */ #define CAN_AM28H 0xFFC02BE4 /* Mailbox 28 High Acceptance Mask */ #define CAN_AM29L 0xFFC02BE8 /* Mailbox 29 Low Acceptance Mask */ #define CAN_AM29H 0xFFC02BEC /* Mailbox 29 High Acceptance Mask */ #define CAN_AM30L 0xFFC02BF0 /* Mailbox 30 Low Acceptance Mask */ #define CAN_AM30H 0xFFC02BF4 /* Mailbox 30 High Acceptance Mask */ #define CAN_AM31L 0xFFC02BF8 /* Mailbox 31 Low Acceptance Mask */ #define CAN_AM31H 0xFFC02BFC /* Mailbox 31 High Acceptance Mask */ /* CAN Acceptance Mask Macros */ #define CAN_AM_L(x) (CAN_AM00L+((x)*0x8)) #define CAN_AM_H(x) (CAN_AM00H+((x)*0x8)) /* Mailbox Registers */ #define CAN_MB00_DATA0 0xFFC02C00 /* Mailbox 0 Data Word 0 [15:0] Register */ #define CAN_MB00_DATA1 0xFFC02C04 /* Mailbox 0 Data Word 1 [31:16] Register */ #define CAN_MB00_DATA2 0xFFC02C08 /* Mailbox 0 Data Word 2 [47:32] Register */ #define CAN_MB00_DATA3 0xFFC02C0C /* Mailbox 0 Data Word 3 [63:48] Register */ #define CAN_MB00_LENGTH 0xFFC02C10 /* Mailbox 0 Data Length Code Register */ #define CAN_MB00_TIMESTAMP 0xFFC02C14 /* Mailbox 0 Time Stamp Value Register */ #define CAN_MB00_ID0 0xFFC02C18 /* Mailbox 0 Identifier Low Register */ #define CAN_MB00_ID1 0xFFC02C1C /* Mailbox 0 Identifier High Register */ #define CAN_MB01_DATA0 0xFFC02C20 /* Mailbox 1 Data Word 0 [15:0] Register */ #define CAN_MB01_DATA1 0xFFC02C24 /* Mailbox 1 Data Word 1 [31:16] Register */ #define CAN_MB01_DATA2 0xFFC02C28 /* Mailbox 1 Data Word 2 [47:32] Register */ #define CAN_MB01_DATA3 0xFFC02C2C /* Mailbox 1 Data Word 3 [63:48] Register */ #define CAN_MB01_LENGTH 0xFFC02C30 /* Mailbox 1 Data Length Code Register */ #define CAN_MB01_TIMESTAMP 0xFFC02C34 /* Mailbox 1 Time Stamp Value Register */ #define CAN_MB01_ID0 0xFFC02C38 /* Mailbox 1 Identifier Low Register */ #define CAN_MB01_ID1 0xFFC02C3C /* Mailbox 1 Identifier High Register */ #define CAN_MB02_DATA0 0xFFC02C40 /* Mailbox 2 Data Word 0 [15:0] Register */ #define CAN_MB02_DATA1 0xFFC02C44 /* Mailbox 2 Data Word 1 [31:16] Register */ #define CAN_MB02_DATA2 0xFFC02C48 /* Mailbox 2 Data Word 2 [47:32] Register */ #define CAN_MB02_DATA3 0xFFC02C4C /* Mailbox 2 Data Word 3 [63:48] Register */ #define CAN_MB02_LENGTH 0xFFC02C50 /* Mailbox 2 Data Length Code Register */ #define CAN_MB02_TIMESTAMP 0xFFC02C54 /* Mailbox 2 Time Stamp Value Register */ #define CAN_MB02_ID0 0xFFC02C58 /* Mailbox 2 Identifier Low Register */ #define CAN_MB02_ID1 0xFFC02C5C /* Mailbox 2 Identifier High Register */ #define CAN_MB03_DATA0 0xFFC02C60 /* Mailbox 3 Data Word 0 [15:0] Register */ #define CAN_MB03_DATA1 0xFFC02C64 /* Mailbox 3 Data Word 1 [31:16] Register */ #define CAN_MB03_DATA2 0xFFC02C68 /* Mailbox 3 Data Word 2 [47:32] Register */ #define CAN_MB03_DATA3 0xFFC02C6C /* Mailbox 3 Data Word 3 [63:48] Register */ #define CAN_MB03_LENGTH 0xFFC02C70 /* Mailbox 3 Data Length Code Register */ #define CAN_MB03_TIMESTAMP 0xFFC02C74 /* Mailbox 3 Time Stamp Value Register */ #define CAN_MB03_ID0 0xFFC02C78 /* Mailbox 3 Identifier Low Register */ #define CAN_MB03_ID1 0xFFC02C7C /* Mailbox 3 Identifier High Register */ #define CAN_MB04_DATA0 0xFFC02C80 /* Mailbox 4 Data Word 0 [15:0] Register */ #define CAN_MB04_DATA1 0xFFC02C84 /* Mailbox 4 Data Word 1 [31:16] Register */ #define CAN_MB04_DATA2 0xFFC02C88 /* Mailbox 4 Data Word 2 [47:32] Register */ #define CAN_MB04_DATA3 0xFFC02C8C /* Mailbox 4 Data Word 3 [63:48] Register */ #define CAN_MB04_LENGTH 0xFFC02C90 /* Mailbox 4 Data Length Code Register */ #define CAN_MB04_TIMESTAMP 0xFFC02C94 /* Mailbox 4 Time Stamp Value Register */ #define CAN_MB04_ID0 0xFFC02C98 /* Mailbox 4 Identifier Low Register */ #define CAN_MB04_ID1 0xFFC02C9C /* Mailbox 4 Identifier High Register */ #define CAN_MB05_DATA0 0xFFC02CA0 /* Mailbox 5 Data Word 0 [15:0] Register */ #define CAN_MB05_DATA1 0xFFC02CA4 /* Mailbox 5 Data Word 1 [31:16] Register */ #define CAN_MB05_DATA2 0xFFC02CA8 /* Mailbox 5 Data Word 2 [47:32] Register */ #define CAN_MB05_DATA3 0xFFC02CAC /* Mailbox 5 Data Word 3 [63:48] Register */ #define CAN_MB05_LENGTH 0xFFC02CB0 /* Mailbox 5 Data Length Code Register */ #define CAN_MB05_TIMESTAMP 0xFFC02CB4 /* Mailbox 5 Time Stamp Value Register */ #define CAN_MB05_ID0 0xFFC02CB8 /* Mailbox 5 Identifier Low Register */ #define CAN_MB05_ID1 0xFFC02CBC /* Mailbox 5 Identifier High Register */ #define CAN_MB06_DATA0 0xFFC02CC0 /* Mailbox 6 Data Word 0 [15:0] Register */ #define CAN_MB06_DATA1 0xFFC02CC4 /* Mailbox 6 Data Word 1 [31:16] Register */ #define CAN_MB06_DATA2 0xFFC02CC8 /* Mailbox 6 Data Word 2 [47:32] Register */ #define CAN_MB06_DATA3 0xFFC02CCC /* Mailbox 6 Data Word 3 [63:48] Register */ #define CAN_MB06_LENGTH 0xFFC02CD0 /* Mailbox 6 Data Length Code Register */ #define CAN_MB06_TIMESTAMP 0xFFC02CD4 /* Mailbox 6 Time Stamp Value Register */ #define CAN_MB06_ID0 0xFFC02CD8 /* Mailbox 6 Identifier Low Register */ #define CAN_MB06_ID1 0xFFC02CDC /* Mailbox 6 Identifier High Register */ #define CAN_MB07_DATA0 0xFFC02CE0 /* Mailbox 7 Data Word 0 [15:0] Register */ #define CAN_MB07_DATA1 0xFFC02CE4 /* Mailbox 7 Data Word 1 [31:16] Register */ #define CAN_MB07_DATA2 0xFFC02CE8 /* Mailbox 7 Data Word 2 [47:32] Register */ #define CAN_MB07_DATA3 0xFFC02CEC /* Mailbox 7 Data Word 3 [63:48] Register */ #define CAN_MB07_LENGTH 0xFFC02CF0 /* Mailbox 7 Data Length Code Register */ #define CAN_MB07_TIMESTAMP 0xFFC02CF4 /* Mailbox 7 Time Stamp Value Register */ #define CAN_MB07_ID0 0xFFC02CF8 /* Mailbox 7 Identifier Low Register */ #define CAN_MB07_ID1 0xFFC02CFC /* Mailbox 7 Identifier High Register */ #define CAN_MB08_DATA0 0xFFC02D00 /* Mailbox 8 Data Word 0 [15:0] Register */ #define CAN_MB08_DATA1 0xFFC02D04 /* Mailbox 8 Data Word 1 [31:16] Register */ #define CAN_MB08_DATA2 0xFFC02D08 /* Mailbox 8 Data Word 2 [47:32] Register */ #define CAN_MB08_DATA3 0xFFC02D0C /* Mailbox 8 Data Word 3 [63:48] Register */ #define CAN_MB08_LENGTH 0xFFC02D10 /* Mailbox 8 Data Length Code Register */ #define CAN_MB08_TIMESTAMP 0xFFC02D14 /* Mailbox 8 Time Stamp Value Register */ #define CAN_MB08_ID0 0xFFC02D18 /* Mailbox 8 Identifier Low Register */ #define CAN_MB08_ID1 0xFFC02D1C /* Mailbox 8 Identifier High Register */ #define CAN_MB09_DATA0 0xFFC02D20 /* Mailbox 9 Data Word 0 [15:0] Register */ #define CAN_MB09_DATA1 0xFFC02D24 /* Mailbox 9 Data Word 1 [31:16] Register */ #define CAN_MB09_DATA2 0xFFC02D28 /* Mailbox 9 Data Word 2 [47:32] Register */ #define CAN_MB09_DATA3 0xFFC02D2C /* Mailbox 9 Data Word 3 [63:48] Register */ #define CAN_MB09_LENGTH 0xFFC02D30 /* Mailbox 9 Data Length Code Register */ #define CAN_MB09_TIMESTAMP 0xFFC02D34 /* Mailbox 9 Time Stamp Value Register */ #define CAN_MB09_ID0 0xFFC02D38 /* Mailbox 9 Identifier Low Register */ #define CAN_MB09_ID1 0xFFC02D3C /* Mailbox 9 Identifier High Register */ #define CAN_MB10_DATA0 0xFFC02D40 /* Mailbox 10 Data Word 0 [15:0] Register */ #define CAN_MB10_DATA1 0xFFC02D44 /* Mailbox 10 Data Word 1 [31:16] Register */ #define CAN_MB10_DATA2 0xFFC02D48 /* Mailbox 10 Data Word 2 [47:32] Register */ #define CAN_MB10_DATA3 0xFFC02D4C /* Mailbox 10 Data Word 3 [63:48] Register */ #define CAN_MB10_LENGTH 0xFFC02D50 /* Mailbox 10 Data Length Code Register */ #define CAN_MB10_TIMESTAMP 0xFFC02D54 /* Mailbox 10 Time Stamp Value Register */ #define CAN_MB10_ID0 0xFFC02D58 /* Mailbox 10 Identifier Low Register */ #define CAN_MB10_ID1 0xFFC02D5C /* Mailbox 10 Identifier High Register */ #define CAN_MB11_DATA0 0xFFC02D60 /* Mailbox 11 Data Word 0 [15:0] Register */ #define CAN_MB11_DATA1 0xFFC02D64 /* Mailbox 11 Data Word 1 [31:16] Register */ #define CAN_MB11_DATA2 0xFFC02D68 /* Mailbox 11 Data Word 2 [47:32] Register */ #define CAN_MB11_DATA3 0xFFC02D6C /* Mailbox 11 Data Word 3 [63:48] Register */ #define CAN_MB11_LENGTH 0xFFC02D70 /* Mailbox 11 Data Length Code Register */ #define CAN_MB11_TIMESTAMP 0xFFC02D74 /* Mailbox 11 Time Stamp Value Register */ #define CAN_MB11_ID0 0xFFC02D78 /* Mailbox 11 Identifier Low Register */ #define CAN_MB11_ID1 0xFFC02D7C /* Mailbox 11 Identifier High Register */ #define CAN_MB12_DATA0 0xFFC02D80 /* Mailbox 12 Data Word 0 [15:0] Register */ #define CAN_MB12_DATA1 0xFFC02D84 /* Mailbox 12 Data Word 1 [31:16] Register */ #define CAN_MB12_DATA2 0xFFC02D88 /* Mailbox 12 Data Word 2 [47:32] Register */ #define CAN_MB12_DATA3 0xFFC02D8C /* Mailbox 12 Data Word 3 [63:48] Register */ #define CAN_MB12_LENGTH 0xFFC02D90 /* Mailbox 12 Data Length Code Register */ #define CAN_MB12_TIMESTAMP 0xFFC02D94 /* Mailbox 12 Time Stamp Value Register */ #define CAN_MB12_ID0 0xFFC02D98 /* Mailbox 12 Identifier Low Register */ #define CAN_MB12_ID1 0xFFC02D9C /* Mailbox 12 Identifier High Register */ #define CAN_MB13_DATA0 0xFFC02DA0 /* Mailbox 13 Data Word 0 [15:0] Register */ #define CAN_MB13_DATA1 0xFFC02DA4 /* Mailbox 13 Data Word 1 [31:16] Register */ #define CAN_MB13_DATA2 0xFFC02DA8 /* Mailbox 13 Data Word 2 [47:32] Register */ #define CAN_MB13_DATA3 0xFFC02DAC /* Mailbox 13 Data Word 3 [63:48] Register */ #define CAN_MB13_LENGTH 0xFFC02DB0 /* Mailbox 13 Data Length Code Register */ #define CAN_MB13_TIMESTAMP 0xFFC02DB4 /* Mailbox 13 Time Stamp Value Register */ #define CAN_MB13_ID0 0xFFC02DB8 /* Mailbox 13 Identifier Low Register */ #define CAN_MB13_ID1 0xFFC02DBC /* Mailbox 13 Identifier High Register */ #define CAN_MB14_DATA0 0xFFC02DC0 /* Mailbox 14 Data Word 0 [15:0] Register */ #define CAN_MB14_DATA1 0xFFC02DC4 /* Mailbox 14 Data Word 1 [31:16] Register */ #define CAN_MB14_DATA2 0xFFC02DC8 /* Mailbox 14 Data Word 2 [47:32] Register */ #define CAN_MB14_DATA3 0xFFC02DCC /* Mailbox 14 Data Word 3 [63:48] Register */ #define CAN_MB14_LENGTH 0xFFC02DD0 /* Mailbox 14 Data Length Code Register */ #define CAN_MB14_TIMESTAMP 0xFFC02DD4 /* Mailbox 14 Time Stamp Value Register */ #define CAN_MB14_ID0 0xFFC02DD8 /* Mailbox 14 Identifier Low Register */ #define CAN_MB14_ID1 0xFFC02DDC /* Mailbox 14 Identifier High Register */ #define CAN_MB15_DATA0 0xFFC02DE0 /* Mailbox 15 Data Word 0 [15:0] Register */ #define CAN_MB15_DATA1 0xFFC02DE4 /* Mailbox 15 Data Word 1 [31:16] Register */ #define CAN_MB15_DATA2 0xFFC02DE8 /* Mailbox 15 Data Word 2 [47:32] Register */ #define CAN_MB15_DATA3 0xFFC02DEC /* Mailbox 15 Data Word 3 [63:48] Register */ #define CAN_MB15_LENGTH 0xFFC02DF0 /* Mailbox 15 Data Length Code Register */ #define CAN_MB15_TIMESTAMP 0xFFC02DF4 /* Mailbox 15 Time Stamp Value Register */ #define CAN_MB15_ID0 0xFFC02DF8 /* Mailbox 15 Identifier Low Register */ #define CAN_MB15_ID1 0xFFC02DFC /* Mailbox 15 Identifier High Register */ #define CAN_MB16_DATA0 0xFFC02E00 /* Mailbox 16 Data Word 0 [15:0] Register */ #define CAN_MB16_DATA1 0xFFC02E04 /* Mailbox 16 Data Word 1 [31:16] Register */ #define CAN_MB16_DATA2 0xFFC02E08 /* Mailbox 16 Data Word 2 [47:32] Register */ #define CAN_MB16_DATA3 0xFFC02E0C /* Mailbox 16 Data Word 3 [63:48] Register */ #define CAN_MB16_LENGTH 0xFFC02E10 /* Mailbox 16 Data Length Code Register */ #define CAN_MB16_TIMESTAMP 0xFFC02E14 /* Mailbox 16 Time Stamp Value Register */ #define CAN_MB16_ID0 0xFFC02E18 /* Mailbox 16 Identifier Low Register */ #define CAN_MB16_ID1 0xFFC02E1C /* Mailbox 16 Identifier High Register */ #define CAN_MB17_DATA0 0xFFC02E20 /* Mailbox 17 Data Word 0 [15:0] Register */ #define CAN_MB17_DATA1 0xFFC02E24 /* Mailbox 17 Data Word 1 [31:16] Register */ #define CAN_MB17_DATA2 0xFFC02E28 /* Mailbox 17 Data Word 2 [47:32] Register */ #define CAN_MB17_DATA3 0xFFC02E2C /* Mailbox 17 Data Word 3 [63:48] Register */ #define CAN_MB17_LENGTH 0xFFC02E30 /* Mailbox 17 Data Length Code Register */ #define CAN_MB17_TIMESTAMP 0xFFC02E34 /* Mailbox 17 Time Stamp Value Register */ #define CAN_MB17_ID0 0xFFC02E38 /* Mailbox 17 Identifier Low Register */ #define CAN_MB17_ID1 0xFFC02E3C /* Mailbox 17 Identifier High Register */ #define CAN_MB18_DATA0 0xFFC02E40 /* Mailbox 18 Data Word 0 [15:0] Register */ #define CAN_MB18_DATA1 0xFFC02E44 /* Mailbox 18 Data Word 1 [31:16] Register */ #define CAN_MB18_DATA2 0xFFC02E48 /* Mailbox 18 Data Word 2 [47:32] Register */ #define CAN_MB18_DATA3 0xFFC02E4C /* Mailbox 18 Data Word 3 [63:48] Register */ #define CAN_MB18_LENGTH 0xFFC02E50 /* Mailbox 18 Data Length Code Register */ #define CAN_MB18_TIMESTAMP 0xFFC02E54 /* Mailbox 18 Time Stamp Value Register */ #define CAN_MB18_ID0 0xFFC02E58 /* Mailbox 18 Identifier Low Register */ #define CAN_MB18_ID1 0xFFC02E5C /* Mailbox 18 Identifier High Register */ #define CAN_MB19_DATA0 0xFFC02E60 /* Mailbox 19 Data Word 0 [15:0] Register */ #define CAN_MB19_DATA1 0xFFC02E64 /* Mailbox 19 Data Word 1 [31:16] Register */ #define CAN_MB19_DATA2 0xFFC02E68 /* Mailbox 19 Data Word 2 [47:32] Register */ #define CAN_MB19_DATA3 0xFFC02E6C /* Mailbox 19 Data Word 3 [63:48] Register */ #define CAN_MB19_LENGTH 0xFFC02E70 /* Mailbox 19 Data Length Code Register */ #define CAN_MB19_TIMESTAMP 0xFFC02E74 /* Mailbox 19 Time Stamp Value Register */ #define CAN_MB19_ID0 0xFFC02E78 /* Mailbox 19 Identifier Low Register */ #define CAN_MB19_ID1 0xFFC02E7C /* Mailbox 19 Identifier High Register */ #define CAN_MB20_DATA0 0xFFC02E80 /* Mailbox 20 Data Word 0 [15:0] Register */ #define CAN_MB20_DATA1 0xFFC02E84 /* Mailbox 20 Data Word 1 [31:16] Register */ #define CAN_MB20_DATA2 0xFFC02E88 /* Mailbox 20 Data Word 2 [47:32] Register */ #define CAN_MB20_DATA3 0xFFC02E8C /* Mailbox 20 Data Word 3 [63:48] Register */ #define CAN_MB20_LENGTH 0xFFC02E90 /* Mailbox 20 Data Length Code Register */ #define CAN_MB20_TIMESTAMP 0xFFC02E94 /* Mailbox 20 Time Stamp Value Register */ #define CAN_MB20_ID0 0xFFC02E98 /* Mailbox 20 Identifier Low Register */ #define CAN_MB20_ID1 0xFFC02E9C /* Mailbox 20 Identifier High Register */ #define CAN_MB21_DATA0 0xFFC02EA0 /* Mailbox 21 Data Word 0 [15:0] Register */ #define CAN_MB21_DATA1 0xFFC02EA4 /* Mailbox 21 Data Word 1 [31:16] Register */ #define CAN_MB21_DATA2 0xFFC02EA8 /* Mailbox 21 Data Word 2 [47:32] Register */ #define CAN_MB21_DATA3 0xFFC02EAC /* Mailbox 21 Data Word 3 [63:48] Register */ #define CAN_MB21_LENGTH 0xFFC02EB0 /* Mailbox 21 Data Length Code Register */ #define CAN_MB21_TIMESTAMP 0xFFC02EB4 /* Mailbox 21 Time Stamp Value Register */ #define CAN_MB21_ID0 0xFFC02EB8 /* Mailbox 21 Identifier Low Register */ #define CAN_MB21_ID1 0xFFC02EBC /* Mailbox 21 Identifier High Register */ #define CAN_MB22_DATA0 0xFFC02EC0 /* Mailbox 22 Data Word 0 [15:0] Register */ #define CAN_MB22_DATA1 0xFFC02EC4 /* Mailbox 22 Data Word 1 [31:16] Register */ #define CAN_MB22_DATA2 0xFFC02EC8 /* Mailbox 22 Data Word 2 [47:32] Register */ #define CAN_MB22_DATA3 0xFFC02ECC /* Mailbox 22 Data Word 3 [63:48] Register */ #define CAN_MB22_LENGTH 0xFFC02ED0 /* Mailbox 22 Data Length Code Register */ #define CAN_MB22_TIMESTAMP 0xFFC02ED4 /* Mailbox 22 Time Stamp Value Register */ #define CAN_MB22_ID0 0xFFC02ED8 /* Mailbox 22 Identifier Low Register */ #define CAN_MB22_ID1 0xFFC02EDC /* Mailbox 22 Identifier High Register */ #define CAN_MB23_DATA0 0xFFC02EE0 /* Mailbox 23 Data Word 0 [15:0] Register */ #define CAN_MB23_DATA1 0xFFC02EE4 /* Mailbox 23 Data Word 1 [31:16] Register */ #define CAN_MB23_DATA2 0xFFC02EE8 /* Mailbox 23 Data Word 2 [47:32] Register */ #define CAN_MB23_DATA3 0xFFC02EEC /* Mailbox 23 Data Word 3 [63:48] Register */ #define CAN_MB23_LENGTH 0xFFC02EF0 /* Mailbox 23 Data Length Code Register */ #define CAN_MB23_TIMESTAMP 0xFFC02EF4 /* Mailbox 23 Time Stamp Value Register */ #define CAN_MB23_ID0 0xFFC02EF8 /* Mailbox 23 Identifier Low Register */ #define CAN_MB23_ID1 0xFFC02EFC /* Mailbox 23 Identifier High Register */ #define CAN_MB24_DATA0 0xFFC02F00 /* Mailbox 24 Data Word 0 [15:0] Register */ #define CAN_MB24_DATA1 0xFFC02F04 /* Mailbox 24 Data Word 1 [31:16] Register */ #define CAN_MB24_DATA2 0xFFC02F08 /* Mailbox 24 Data Word 2 [47:32] Register */ #define CAN_MB24_DATA3 0xFFC02F0C /* Mailbox 24 Data Word 3 [63:48] Register */ #define CAN_MB24_LENGTH 0xFFC02F10 /* Mailbox 24 Data Length Code Register */ #define CAN_MB24_TIMESTAMP 0xFFC02F14 /* Mailbox 24 Time Stamp Value Register */ #define CAN_MB24_ID0 0xFFC02F18 /* Mailbox 24 Identifier Low Register */ #define CAN_MB24_ID1 0xFFC02F1C /* Mailbox 24 Identifier High Register */ #define CAN_MB25_DATA0 0xFFC02F20 /* Mailbox 25 Data Word 0 [15:0] Register */ #define CAN_MB25_DATA1 0xFFC02F24 /* Mailbox 25 Data Word 1 [31:16] Register */ #define CAN_MB25_DATA2 0xFFC02F28 /* Mailbox 25 Data Word 2 [47:32] Register */ #define CAN_MB25_DATA3 0xFFC02F2C /* Mailbox 25 Data Word 3 [63:48] Register */ #define CAN_MB25_LENGTH 0xFFC02F30 /* Mailbox 25 Data Length Code Register */ #define CAN_MB25_TIMESTAMP 0xFFC02F34 /* Mailbox 25 Time Stamp Value Register */ #define CAN_MB25_ID0 0xFFC02F38 /* Mailbox 25 Identifier Low Register */ #define CAN_MB25_ID1 0xFFC02F3C /* Mailbox 25 Identifier High Register */ #define CAN_MB26_DATA0 0xFFC02F40 /* Mailbox 26 Data Word 0 [15:0] Register */ #define CAN_MB26_DATA1 0xFFC02F44 /* Mailbox 26 Data Word 1 [31:16] Register */ #define CAN_MB26_DATA2 0xFFC02F48 /* Mailbox 26 Data Word 2 [47:32] Register */ #define CAN_MB26_DATA3 0xFFC02F4C /* Mailbox 26 Data Word 3 [63:48] Register */ #define CAN_MB26_LENGTH 0xFFC02F50 /* Mailbox 26 Data Length Code Register */ #define CAN_MB26_TIMESTAMP 0xFFC02F54 /* Mailbox 26 Time Stamp Value Register */ #define CAN_MB26_ID0 0xFFC02F58 /* Mailbox 26 Identifier Low Register */ #define CAN_MB26_ID1 0xFFC02F5C /* Mailbox 26 Identifier High Register */ #define CAN_MB27_DATA0 0xFFC02F60 /* Mailbox 27 Data Word 0 [15:0] Register */ #define CAN_MB27_DATA1 0xFFC02F64 /* Mailbox 27 Data Word 1 [31:16] Register */ #define CAN_MB27_DATA2 0xFFC02F68 /* Mailbox 27 Data Word 2 [47:32] Register */ #define CAN_MB27_DATA3 0xFFC02F6C /* Mailbox 27 Data Word 3 [63:48] Register */ #define CAN_MB27_LENGTH 0xFFC02F70 /* Mailbox 27 Data Length Code Register */ #define CAN_MB27_TIMESTAMP 0xFFC02F74 /* Mailbox 27 Time Stamp Value Register */ #define CAN_MB27_ID0 0xFFC02F78 /* Mailbox 27 Identifier Low Register */ #define CAN_MB27_ID1 0xFFC02F7C /* Mailbox 27 Identifier High Register */ #define CAN_MB28_DATA0 0xFFC02F80 /* Mailbox 28 Data Word 0 [15:0] Register */ #define CAN_MB28_DATA1 0xFFC02F84 /* Mailbox 28 Data Word 1 [31:16] Register */ #define CAN_MB28_DATA2 0xFFC02F88 /* Mailbox 28 Data Word 2 [47:32] Register */ #define CAN_MB28_DATA3 0xFFC02F8C /* Mailbox 28 Data Word 3 [63:48] Register */ #define CAN_MB28_LENGTH 0xFFC02F90 /* Mailbox 28 Data Length Code Register */ #define CAN_MB28_TIMESTAMP 0xFFC02F94 /* Mailbox 28 Time Stamp Value Register */ #define CAN_MB28_ID0 0xFFC02F98 /* Mailbox 28 Identifier Low Register */ #define CAN_MB28_ID1 0xFFC02F9C /* Mailbox 28 Identifier High Register */ #define CAN_MB29_DATA0 0xFFC02FA0 /* Mailbox 29 Data Word 0 [15:0] Register */ #define CAN_MB29_DATA1 0xFFC02FA4 /* Mailbox 29 Data Word 1 [31:16] Register */ #define CAN_MB29_DATA2 0xFFC02FA8 /* Mailbox 29 Data Word 2 [47:32] Register */ #define CAN_MB29_DATA3 0xFFC02FAC /* Mailbox 29 Data Word 3 [63:48] Register */ #define CAN_MB29_LENGTH 0xFFC02FB0 /* Mailbox 29 Data Length Code Register */ #define CAN_MB29_TIMESTAMP 0xFFC02FB4 /* Mailbox 29 Time Stamp Value Register */ #define CAN_MB29_ID0 0xFFC02FB8 /* Mailbox 29 Identifier Low Register */ #define CAN_MB29_ID1 0xFFC02FBC /* Mailbox 29 Identifier High Register */ #define CAN_MB30_DATA0 0xFFC02FC0 /* Mailbox 30 Data Word 0 [15:0] Register */ #define CAN_MB30_DATA1 0xFFC02FC4 /* Mailbox 30 Data Word 1 [31:16] Register */ #define CAN_MB30_DATA2 0xFFC02FC8 /* Mailbox 30 Data Word 2 [47:32] Register */ #define CAN_MB30_DATA3 0xFFC02FCC /* Mailbox 30 Data Word 3 [63:48] Register */ #define CAN_MB30_LENGTH 0xFFC02FD0 /* Mailbox 30 Data Length Code Register */ #define CAN_MB30_TIMESTAMP 0xFFC02FD4 /* Mailbox 30 Time Stamp Value Register */ #define CAN_MB30_ID0 0xFFC02FD8 /* Mailbox 30 Identifier Low Register */ #define CAN_MB30_ID1 0xFFC02FDC /* Mailbox 30 Identifier High Register */ #define CAN_MB31_DATA0 0xFFC02FE0 /* Mailbox 31 Data Word 0 [15:0] Register */ #define CAN_MB31_DATA1 0xFFC02FE4 /* Mailbox 31 Data Word 1 [31:16] Register */ #define CAN_MB31_DATA2 0xFFC02FE8 /* Mailbox 31 Data Word 2 [47:32] Register */ #define CAN_MB31_DATA3 0xFFC02FEC /* Mailbox 31 Data Word 3 [63:48] Register */ #define CAN_MB31_LENGTH 0xFFC02FF0 /* Mailbox 31 Data Length Code Register */ #define CAN_MB31_TIMESTAMP 0xFFC02FF4 /* Mailbox 31 Time Stamp Value Register */ #define CAN_MB31_ID0 0xFFC02FF8 /* Mailbox 31 Identifier Low Register */ #define CAN_MB31_ID1 0xFFC02FFC /* Mailbox 31 Identifier High Register */ /* CAN Mailbox Area Macros */ #define CAN_MB_ID1(x) (CAN_MB00_ID1+((x)*0x20)) #define CAN_MB_ID0(x) (CAN_MB00_ID0+((x)*0x20)) #define CAN_MB_TIMESTAMP(x) (CAN_MB00_TIMESTAMP+((x)*0x20)) #define CAN_MB_LENGTH(x) (CAN_MB00_LENGTH+((x)*0x20)) #define CAN_MB_DATA3(x) (CAN_MB00_DATA3+((x)*0x20)) #define CAN_MB_DATA2(x) (CAN_MB00_DATA2+((x)*0x20)) #define CAN_MB_DATA1(x) (CAN_MB00_DATA1+((x)*0x20)) #define CAN_MB_DATA0(x) (CAN_MB00_DATA0+((x)*0x20)) /* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ #define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ #define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ #define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ #define PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ /* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ #define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ #define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ /*********************************************************************************** ** System MMR Register Bits And Macros ** ** Disclaimer: All macros are intended to make C and Assembly code more readable. ** Use these macros carefully, as any that do left shifts for field ** depositing will result in the lower order bits being destroyed. Any ** macro that shifts left to properly position the bit-field should be ** used as part of an OR to initialize a register and NOT as a dynamic ** modifier UNLESS the lower order bits are saved and ORed back in when ** the macro is used. *************************************************************************************/ /* ** ********************* PLL AND RESET MASKS ****************************************/ /* PLL_CTL Masks */ #define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ #define PLL_OFF 0x0002 /* PLL Not Powered */ #define STOPCK 0x0008 /* Core Clock Off */ #define PDWN 0x0020 /* Enter Deep Sleep Mode */ #define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ #define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ #define BYPASS 0x0100 /* Bypass the PLL */ #define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ #define SPORT_HYS 0x8000 /* Add 250mV of Hysteresis to SPORT Inputs */ /* PLL_CTL Macros */ #ifdef _MISRA_RULES #define SET_MSEL(x) (((x)&0x3Fu) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ #else #define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ #endif /* _MISRA_RULES */ /* PLL_DIV Masks */ #define SSEL 0x000F /* System Select */ #define CSEL 0x0030 /* Core Select */ #define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ #define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ #define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ #define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ /* PLL_DIV Macros */ #ifdef _MISRA_RULES #define SET_SSEL(x) ((x)&0xFu) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ #else #define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ #endif /* _MISRA_RULES */ /* VR_CTL Masks */ #define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ #define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ #define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ #define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ #define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ #define GAIN 0x000C /* Voltage Level Gain */ #define GAIN_5 0x0000 /* GAIN = 5 */ #define GAIN_10 0x0004 /* GAIN = 10 */ #define GAIN_20 0x0008 /* GAIN = 20 */ #define GAIN_50 0x000C /* GAIN = 50 */ #define VLEV 0x00F0 /* Internal Voltage Level - Only Program Values Within Specifications */ #define VLEV_085 0x0060 /* VLEV = 0.85 V (See Datasheet for Regulator Tolerance) */ #define VLEV_090 0x0070 /* VLEV = 0.90 V (See Datasheet for Regulator Tolerance) */ #define VLEV_095 0x0080 /* VLEV = 0.95 V (See Datasheet for Regulator Tolerance) */ #define VLEV_100 0x0090 /* VLEV = 1.00 V (See Datasheet for Regulator Tolerance) */ #define VLEV_105 0x00A0 /* VLEV = 1.05 V (See Datasheet for Regulator Tolerance) */ #define VLEV_110 0x00B0 /* VLEV = 1.10 V (See Datasheet for Regulator Tolerance) */ #define VLEV_115 0x00C0 /* VLEV = 1.15 V (See Datasheet for Regulator Tolerance) */ #define VLEV_120 0x00D0 /* VLEV = 1.20 V (See Datasheet for Regulator Tolerance) */ #define VLEV_125 0x00E0 /* VLEV = 1.25 V (See Datasheet for Regulator Tolerance) */ #define VLEV_130 0x00F0 /* VLEV = 1.30 V (See Datasheet for Regulator Tolerance) */ #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ #define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ #define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ #define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ #define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ #define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ /* PLL_STAT Masks */ #define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ #define FULL_ON 0x0002 /* Processor In Full On Mode */ #define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ #define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ /* SWRST Masks */ #define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ #define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ #define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ #define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ /* SYSCR Masks */ /* SYSCR Masks */ #define BMODE_BYPASS 0x0000 /* Bypass boot ROM, execute from 16-bit external memory */ #define BMODE_FLASH 0x0001 /* Use Boot ROM to load from 8-bit or 16-bit flash */ #define BMODE_SPIMEM 0x0003 /* Boot from serial SPI memory */ #define BMODE_SPIHOST 0x0004 /* Boot from SPI0 host (slave mode) */ #define BMODE_TWIMEM 0x0005 /* Boot from serial TWI memory */ #define BMODE_TWIHOST 0x0006 /* Boot from TWI0 host (slave mode) */ #define BMODE_UARTHOST 0x0007 /* Boot from UART0 host */ #define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ #define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ /* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/ /* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */ #define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */ #define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */ #define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */ #define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ #define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ #define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ #define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */ #define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */ #define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */ #define IRQ_TWI 0x00000200 /* TWI Interrupt */ #define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */ #define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ #define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */ #define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */ #define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */ #define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */ #define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */ #define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */ #define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */ #define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */ #define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */ #define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */ #define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */ #define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */ #define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */ #define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */ #define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */ #define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */ #define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */ #define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */ #define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */ #define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */ #define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */ #define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */ #define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */ #define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */ #define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */ #ifdef _MISRA_RULES #define _MF15 0xFu #define _MF7 7u #else #define _MF15 0xF #define _MF7 7 #endif /* _MISRA_RULES */ /* SIC_IAR0 Macros */ #define P0_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #0 assigned IVG #x */ #define P1_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #1 assigned IVG #x */ #define P2_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #2 assigned IVG #x */ #define P3_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #3 assigned IVG #x */ #define P4_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #4 assigned IVG #x */ #define P5_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #5 assigned IVG #x */ #define P6_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #6 assigned IVG #x */ #define P7_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #7 assigned IVG #x */ /* SIC_IAR1 Macros */ #define P8_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #8 assigned IVG #x */ #define P9_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #9 assigned IVG #x */ #define P10_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #10 assigned IVG #x */ #define P11_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #11 assigned IVG #x */ #define P12_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #12 assigned IVG #x */ #define P13_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #13 assigned IVG #x */ #define P14_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #14 assigned IVG #x */ #define P15_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #15 assigned IVG #x */ /* SIC_IAR2 Macros */ #define P16_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #16 assigned IVG #x */ #define P17_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #17 assigned IVG #x */ #define P18_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #18 assigned IVG #x */ #define P19_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #19 assigned IVG #x */ #define P20_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #20 assigned IVG #x */ #define P21_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #21 assigned IVG #x */ #define P22_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #22 assigned IVG #x */ #define P23_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #23 assigned IVG #x */ /* SIC_IAR3 Macros */ #define P24_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #24 assigned IVG #x */ #define P25_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #25 assigned IVG #x */ #define P26_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #26 assigned IVG #x */ #define P27_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #27 assigned IVG #x */ #define P28_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #28 assigned IVG #x */ #define P29_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #29 assigned IVG #x */ #define P30_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #30 assigned IVG #x */ #define P31_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #31 assigned IVG #x */ /* SIC_IMASK Masks */ #define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ #define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ #ifdef _MISRA_RULES #define SIC_MASK(x) (1 << ((x)&0x1Fu)) /* Mask Peripheral #x interrupt */ #define SIC_UNMASK(x) (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu))) /* Unmask Peripheral #x interrupt */ #else #define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ #define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ #endif /* _MISRA_RULES */ /* SIC_IWR Masks */ #define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ #define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ #ifdef _MISRA_RULES #define IWR_ENABLE(x) (1 << ((x)&0x1Fu)) /* Wakeup Enable Peripheral #x */ #define IWR_DISABLE(x) (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu))) /* Wakeup Disable Peripheral #x */ #else #define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ #endif /* _MISRA_RULES */ /* ********* WATCHDOG TIMER MASKS ******************** */ /* Watchdog Timer WDOG_CTL Register Masks */ #ifdef _MISRA_RULES #define WDEV(x) (((x)<<1) & 0x0006u) /* event generated on roll over */ #else #define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ #endif /* _MISRA_RULES */ #define WDEV_RESET 0x0000 /* generate reset event on roll over */ #define WDEV_NMI 0x0002 /* generate NMI event on roll over */ #define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ #define WDEV_NONE 0x0006 /* no event on roll over */ #define WDEN 0x0FF0 /* enable watchdog */ #define WDDIS 0x0AD0 /* disable watchdog */ #define WDRO 0x8000 /* watchdog rolled over latch */ /* depreciated WDOG_CTL Register Masks for legacy code */ #define ICTL WDEV #define ENABLE_RESET WDEV_RESET #define WDOG_RESET WDEV_RESET #define ENABLE_NMI WDEV_NMI #define WDOG_NMI WDEV_NMI #define ENABLE_GPI WDEV_GPI #define WDOG_GPI WDEV_GPI #define DISABLE_EVT WDEV_NONE #define WDOG_NONE WDEV_NONE #define TMR_EN WDEN #define WDOG_DISABLE WDDIS #define TRO WDRO #define ICTL_P0 0x01 #define ICTL_P1 0x02 #define TRO_P 0x0F /* *************** REAL TIME CLOCK MASKS **************************/ /* RTC_STAT and RTC_ALARM Masks */ #define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ #define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ #define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ #define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ /* RTC_ALARM Macro z=day y=hr x=min w=sec */ #ifdef _MISRA_RULES #define SET_ALARM(z,y,x,w) ((((z)&0x7FFFu)<<0x11)|(((y)&0x1Fu)<<0xC)|(((x)&0x3Fu)<<0x6)|((w)&0x3Fu)) #else #define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) #endif /* _MISRA_RULES */ /* RTC_ICTL and RTC_ISTAT Masks */ #define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ #define ALARM 0x0002 /* Alarm Interrupt Enable */ #define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ #define MINUTE 0x0008 /* Minutes Interrupt Enable */ #define HOUR 0x0010 /* Hours Interrupt Enable */ #define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ #define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ #define WRITE_PENDING 0x4000 /* Write Pending Status */ #define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ /* RTC_FAST / RTC_PREN Mask */ #define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ /* ************** UART CONTROLLER MASKS *************************/ /* UARTx_LCR Masks */ #ifdef _MISRA_RULES #define WLS(x) (((x)-5u) & 0x03u) /* Word Length Select */ #else #define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ #endif /* _MISRA_RULES */ #define STB 0x04 /* Stop Bits */ #define PEN 0x08 /* Parity Enable */ #define EPS 0x10 /* Even Parity Select */ #define STP 0x20 /* Stick Parity */ #define SB 0x40 /* Set Break */ #define DLAB 0x80 /* Divisor Latch Access */ /* UARTx_MCR Mask */ #define LOOP_ENA 0x10 /* Loopback Mode Enable */ #define LOOP_ENA_P 0x04 /* UARTx_LSR Masks */ #define DR 0x01 /* Data Ready */ #define OE 0x02 /* Overrun Error */ #define PE 0x04 /* Parity Error */ #define FE 0x08 /* Framing Error */ #define BI 0x10 /* Break Interrupt */ #define THRE 0x20 /* THR Empty */ #define TEMT 0x40 /* TSR and UART_THR Empty */ /* UARTx_IER Masks */ #define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ #define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ #define ELSI 0x04 /* Enable RX Status Interrupt */ /* UARTx_IIR Masks */ #define NINT 0x01 /* Pending Interrupt */ #define STATUS 0x06 /* Highest Priority Pending Interrupt */ /* UARTx_GCTL Masks */ #define UCEN 0x01 /* Enable UARTx Clocks */ #define IREN 0x02 /* Enable IrDA Mode */ #define TPOLC 0x04 /* IrDA TX Polarity Change */ #define RPOLC 0x08 /* IrDA RX Polarity Change */ #define FPE 0x10 /* Force Parity Error On Transmit */ #define FFE 0x20 /* Force Framing Error On Transmit */ /* Bit masks for UART Divisor Latch Registers: UARTx_DLL & UARTx_DLH */ #define UARTDLL 0x00FF /* Divisor Latch Low Byte */ #define UARTDLH 0xFF00 /* Divisor Latch High Byte */ /* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/ /* SPI_CTL Masks */ #define TIMOD 0x0003 /* Transfer Initiate Mode */ #define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ #define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ #define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ #define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ #define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ #define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ #define PSSE 0x0010 /* Slave-Select Input Enable */ #define EMISO 0x0020 /* Enable MISO As Output */ #define SIZE 0x0100 /* Size of Words (16/8* Bits) */ #define LSBF 0x0200 /* LSB First */ #define CPHA 0x0400 /* Clock Phase */ #define CPOL 0x0800 /* Clock Polarity */ #define MSTR 0x1000 /* Master/Slave* */ #define WOM 0x2000 /* Write Open Drain Master */ #define SPE 0x4000 /* SPI Enable */ /* SPI_FLG Masks */ #define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ #define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ #define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ #define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ #define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ #define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ #define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ #define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ #define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ #define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ #define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ #define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ #define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ #define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ /* SPI_STAT Masks */ #define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ #define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ #define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ #define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ #define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ #define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ #define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ /* **************** GENERAL PURPOSE TIMER MASKS **********************/ /* TIMER_ENABLE Masks */ #define TIMEN0 0x0001 /* Enable Timer 0 */ #define TIMEN1 0x0002 /* Enable Timer 1 */ #define TIMEN2 0x0004 /* Enable Timer 2 */ #define TIMEN3 0x0008 /* Enable Timer 3 */ #define TIMEN4 0x0010 /* Enable Timer 4 */ #define TIMEN5 0x0020 /* Enable Timer 5 */ #define TIMEN6 0x0040 /* Enable Timer 6 */ #define TIMEN7 0x0080 /* Enable Timer 7 */ /* TIMER_DISABLE Masks */ #define TIMDIS0 TIMEN0 /* Disable Timer 0 */ #define TIMDIS1 TIMEN1 /* Disable Timer 1 */ #define TIMDIS2 TIMEN2 /* Disable Timer 2 */ #define TIMDIS3 TIMEN3 /* Disable Timer 3 */ #define TIMDIS4 TIMEN4 /* Disable Timer 4 */ #define TIMDIS5 TIMEN5 /* Disable Timer 5 */ #define TIMDIS6 TIMEN6 /* Disable Timer 6 */ #define TIMDIS7 TIMEN7 /* Disable Timer 7 */ /* TIMER_STATUS Masks */ #define TIMIL0 0x00000001 /* Timer 0 Interrupt */ #define TIMIL1 0x00000002 /* Timer 1 Interrupt */ #define TIMIL2 0x00000004 /* Timer 2 Interrupt */ #define TIMIL3 0x00000008 /* Timer 3 Interrupt */ #define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ #define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ #define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ #define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ #define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ #define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ #define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ #define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ #define TIMIL4 0x00010000 /* Timer 4 Interrupt */ #define TIMIL5 0x00020000 /* Timer 5 Interrupt */ #define TIMIL6 0x00040000 /* Timer 6 Interrupt */ #define TIMIL7 0x00080000 /* Timer 7 Interrupt */ #define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ #define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ #define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ #define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ #define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ #define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ /* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ #define TOVL_ERR0 TOVF_ERR0 #define TOVL_ERR1 TOVF_ERR1 #define TOVL_ERR2 TOVF_ERR2 #define TOVL_ERR3 TOVF_ERR3 #define TOVL_ERR4 TOVF_ERR4 #define TOVL_ERR5 TOVF_ERR5 #define TOVL_ERR6 TOVF_ERR6 #define TOVL_ERR7 TOVF_ERR7 /* TIMERx_CONFIG Masks */ #define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ #define WDTH_CAP 0x0002 /* Width Capture Input Mode */ #define EXT_CLK 0x0003 /* External Clock Mode */ #define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ #define PERIOD_CNT 0x0008 /* Period Count */ #define IRQ_ENA 0x0010 /* Interrupt Request Enable */ #define TIN_SEL 0x0020 /* Timer Input Select */ #define OUT_DIS 0x0040 /* Output Pad Disable */ #define CLK_SEL 0x0080 /* Timer Clock Select */ #define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ #define EMU_RUN 0x0200 /* Emulation Behavior Select */ #define ERR_TYP 0xC000 /* Error Type */ /* ****************** GPIO PORTS F, G, H MASKS ***********************/ /* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ /* Port F Masks */ #define PF0 0x0001 #define PF1 0x0002 #define PF2 0x0004 #define PF3 0x0008 #define PF4 0x0010 #define PF5 0x0020 #define PF6 0x0040 #define PF7 0x0080 #define PF8 0x0100 #define PF9 0x0200 #define PF10 0x0400 #define PF11 0x0800 #define PF12 0x1000 #define PF13 0x2000 #define PF14 0x4000 #define PF15 0x8000 /* Port G Masks */ #define PG0 0x0001 #define PG1 0x0002 #define PG2 0x0004 #define PG3 0x0008 #define PG4 0x0010 #define PG5 0x0020 #define PG6 0x0040 #define PG7 0x0080 #define PG8 0x0100 #define PG9 0x0200 #define PG10 0x0400 #define PG11 0x0800 #define PG12 0x1000 #define PG13 0x2000 #define PG14 0x4000 #define PG15 0x8000 /* Port H Masks */ #define PH0 0x0001 #define PH1 0x0002 #define PH2 0x0004 #define PH3 0x0008 #define PH4 0x0010 #define PH5 0x0020 #define PH6 0x0040 #define PH7 0x0080 #define PH8 0x0100 #define PH9 0x0200 #define PH10 0x0400 #define PH11 0x0800 #define PH12 0x1000 #define PH13 0x2000 #define PH14 0x4000 #define PH15 0x8000 /* ******************* SERIAL PORT MASKS **************************************/ /* SPORTx_TCR1 Masks */ #define TSPEN 0x0001 /* Transmit Enable */ #define ITCLK 0x0002 /* Internal Transmit Clock Select */ #define DTYPE_NORM 0x0000 /* Data Format Normal */ #define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ #define DTYPE_ALAW 0x000C /* Compand Using A-Law */ #define TLSBIT 0x0010 /* Transmit Bit Order */ #define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ #define TFSR 0x0400 /* Transmit Frame Sync Required Select */ #define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ #define LTFS 0x1000 /* Low Transmit Frame Sync Select */ #define LATFS 0x2000 /* Late Transmit Frame Sync Select */ #define TCKFE 0x4000 /* Clock Falling Edge Select */ /* SPORTx_TCR2 Masks and Macro */ #ifdef _MISRA_RULES #define SLEN(x) ((x)&0x1Fu) /* SPORT TX Word Length (2 - 31) */ #else #define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ #endif /* _MISRA_RULES */ #define TXSE 0x0100 /* TX Secondary Enable */ #define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ #define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ /* SPORTx_RCR1 Masks */ #define RSPEN 0x0001 /* Receive Enable */ #define IRCLK 0x0002 /* Internal Receive Clock Select */ #define DTYPE_NORM 0x0000 /* Data Format Normal */ #define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ #define DTYPE_ALAW 0x000C /* Compand Using A-Law */ #define RLSBIT 0x0010 /* Receive Bit Order */ #define IRFS 0x0200 /* Internal Receive Frame Sync Select */ #define RFSR 0x0400 /* Receive Frame Sync Required Select */ #define LRFS 0x1000 /* Low Receive Frame Sync Select */ #define LARFS 0x2000 /* Late Receive Frame Sync Select */ #define RCKFE 0x4000 /* Clock Falling Edge Select */ /* SPORTx_RCR2 Masks */ #ifdef _MISRA_RULES #define SLEN(x) ((x)&0x1Fu) /* SPORT RX Word Length (2 - 31) */ #else #define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ #endif /* _MISRA_RULES */ #define RXSE 0x0100 /* RX Secondary Enable */ #define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ #define RRFST 0x0400 /* Right-First Data Order */ /* SPORTx_STAT Masks */ #define RXNE 0x0001 /* Receive FIFO Not Empty Status */ #define RUVF 0x0002 /* Sticky Receive Underflow Status */ #define ROVF 0x0004 /* Sticky Receive Overflow Status */ #define TXF 0x0008 /* Transmit FIFO Full Status */ #define TUVF 0x0010 /* Sticky Transmit Underflow Status */ #define TOVF 0x0020 /* Sticky Transmit Overflow Status */ #define TXHRE 0x0040 /* Transmit Hold Register Empty */ /* SPORTx_MCMC1 Macros */ #ifdef _MISRA_RULES #define WOFF(x) ((x) & 0x3FFu) /* Multichannel Window Offset Field */ /* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ #define WSIZE(x) (((((x)>>0x3)-1u)&0xFu) << 0xC) /* Multichannel Window Size = (x/8)-1 */ #else #define WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ /* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ #define WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ #endif /* _MISRA_RULES */ /* SPORTx_MCMC2 Masks */ #define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ #define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ #define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ #define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ #define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ #define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ #define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ #define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ #define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ #define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ #define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ #define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ #define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ #define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ #define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ #define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ #define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ #define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ #define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ #define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ #define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ #define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ #define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ /* EBIU_AMGCTL Masks */ #define AMCKEN 0x0001 /* Enable CLKOUT */ #define AMBEN_NONE 0x0000 /* All Banks Disabled */ #define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ #define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ #define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ #define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ #define CDPRIO 0x0100 /* DMA has priority over core for for external accesses */ /* EBIU_AMBCTL0 Masks */ #define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ #define B0RDYPOL 0x00000002 /* B0 RDY Active High */ #define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ #define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ #define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ #define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ #define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ #define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ #define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ #define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ #define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ #define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ #define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ #define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ #define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ #define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ #define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ #define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ #define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ #define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ #define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ #define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ #define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ #define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ #define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ #define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ #define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ #define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ #define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ #define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ #define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ #define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ #define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ #define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ #define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ #define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ #define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ #define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ #define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ #define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ #define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ #define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ #define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ #define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ #define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ #define B1RDYPOL 0x00020000 /* B1 RDY Active High */ #define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ #define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ #define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ #define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ #define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ #define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ #define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ #define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ #define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ #define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ #define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ #define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ #define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ #define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ #define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ #define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ #define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ #define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ #define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ #define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ #define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ #define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ #define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ #define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ #define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ #define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ #define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ #define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ #define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ #define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ #define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ #define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ #define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ #define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ #define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ #define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ #define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ #define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ #define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ #define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ #define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ #define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ /* EBIU_AMBCTL1 Masks */ #define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ #define B2RDYPOL 0x00000002 /* B2 RDY Active High */ #define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ #define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ #define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ #define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ #define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ #define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ #define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ #define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ #define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ #define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ #define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ #define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ #define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ #define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ #define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ #define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ #define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ #define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ #define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ #define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ #define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ #define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ #define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ #define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ #define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ #define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ #define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ #define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ #define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ #define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ #define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ #define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ #define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ #define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ #define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ #define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ #define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ #define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ #define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ #define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ #define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ #define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ #define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ #define B3RDYPOL 0x00020000 /* B3 RDY Active High */ #define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ #define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ #define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ #define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ #define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ #define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ #define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ #define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ #define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ #define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ #define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ #define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ #define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ #define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ #define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ #define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ #define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ #define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ #define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ #define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ #define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ #define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ #define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ #define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ #define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ #define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ #define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ #define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ #define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ #define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ #define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ #define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ #define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ #define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ #define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ #define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ #define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ #define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ #define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ #define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ #define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ #define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ /* ********************** SDRAM CONTROLLER MASKS **********************************************/ /* EBIU_SDGCTL Masks */ #define SCTLE 0x00000001 /* Enable SDRAM Signals */ #define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ #define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ #define CL 0x0000000C /* SDRAM CAS latency */ #define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ #define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ #define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ #define PASR 0x00000030 /* SDRAM partial array self-refresh */ #define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ #define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ #define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ #define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ #define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ #define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ #define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ #define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ #define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ #define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ #define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ #define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ #define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ #define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ #define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ #define TRAS 0x000003C0 /* SDRAM tRAS in SCLK cycles */ #define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ #define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ #define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ #define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ #define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ #define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ #define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ #define TRP 0x00003800 /* SDRAM tRP in SCLK cycles */ #define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ #define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ #define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ #define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ #define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ #define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ #define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ #define TRCD 0x00030000 /* SDRAM tRCD in SCLK cycles */ #define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ #define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ #define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ #define TWR 0x00180000 /* SDRAM tWR in SCLK cycles */ #define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ #define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ #define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ #define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ #define EBUFE 0x02000000 /* Enable External Buffering Timing */ #define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ #define EMREN 0x10000000 /* Extended Mode Register Enable */ #define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ #define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ /* EBIU_SDBCTL Masks */ #define EBE 0x0001 /* Enable SDRAM External Bank */ #define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ #define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ #define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ #define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ #define EBSZ 0x0006 /* SDRAM external bank size */ #define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ #define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ #define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ #define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ #define EBCAW 0x0030 /* SDRAM external bank column address width */ /* EBIU_SDSTAT Masks */ #define SDCI 0x0001 /* SDRAM Controller Idle */ #define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ #define SDPUA 0x0004 /* SDRAM Power-Up Active */ #define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ #define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ #define BGSTAT 0x0020 /* Bus Grant Status */ /* ************************** DMA CONTROLLER MASKS ********************************/ /* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ #define DMAEN 0x0001 /* DMA Channel Enable */ #define WNR 0x0002 /* Channel Direction (W/R*) */ #define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ #define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ #define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ #define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ #define SYNC 0x0020 /* DMA Buffer Clear */ #define DI_SEL 0x0040 /* Data Interrupt Timing Select */ #define DI_EN 0x0080 /* Data Interrupt Enable */ #define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ #define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ #define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ #define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ #define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ #define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ #define FLOW_STOP 0x0000 /* Stop Mode */ #define FLOW_AUTO 0x1000 /* Autobuffer Mode */ #define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */ #define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ #define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ #define PMAP 0xF000 /* Peripheral Mapped To This Channel */ #define PMAP_PPI 0x0000 /* PPI Port DMA */ #define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ #define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ #define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ #define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ #define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ #define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ #define PMAP_SPI 0x7000 /* SPI Port DMA */ #define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ #define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ #define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ #define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ /* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ #define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ #define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ #define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ #define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ /* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ /* PPI_CONTROL Masks */ #define PORT_EN 0x0001 /* PPI Port Enable */ #define PORT_DIR 0x0002 /* PPI Port Direction */ #define XFR_TYPE 0x000C /* PPI Transfer Type */ #define PORT_CFG 0x0030 /* PPI Port Configuration */ #define FLD_SEL 0x0040 /* PPI Active Field Select */ #define PACK_EN 0x0080 /* PPI Packing Mode */ /* previous versions of defBF534.h erroneously included DMA32 (PPI 32-bit DMA Enable) */ #define SKIP_EN 0x0200 /* PPI Skip Element Enable */ #define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ #define DLEN_8 0x0000 /* Data Length = 8 Bits */ #define DLEN_10 0x0800 /* Data Length = 10 Bits */ #define DLEN_11 0x1000 /* Data Length = 11 Bits */ #define DLEN_12 0x1800 /* Data Length = 12 Bits */ #define DLEN_13 0x2000 /* Data Length = 13 Bits */ #define DLEN_14 0x2800 /* Data Length = 14 Bits */ #define DLEN_15 0x3000 /* Data Length = 15 Bits */ #define DLEN_16 0x3800 /* Data Length = 16 Bits */ #define POLC 0x4000 /* PPI Clock Polarity */ #define POLS 0x8000 /* PPI Frame Sync Polarity */ /* PPI_STATUS Masks */ #define FLD 0x0400 /* Field Indicator */ #define FT_ERR 0x0800 /* Frame Track Error */ #define OVR 0x1000 /* FIFO Overflow Error */ #define UNDR 0x2000 /* FIFO Underrun Error */ #define ERR_DET 0x4000 /* Error Detected Indicator */ #define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ /* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ /* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ #ifdef _MISRA_RULES #define CLKLOW(x) ((x) & 0xFFu) /* Periods Clock Is Held Low */ #define CLKHI(y) (((y)&0xFFu)<<0x8) /* Periods Before New Clock Low */ #else #define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ #define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ #endif /* _MISRA_RULES */ /* TWI_PRESCALE Masks */ #define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ #define TWI_ENA 0x0080 /* TWI Enable */ #define SCCB 0x0200 /* SCCB Compatibility Enable */ /* TWI_SLAVE_CTRL Masks */ #define SEN 0x0001 /* Slave Enable */ #define SADD_LEN 0x0002 /* Slave Address Length */ #define STDVAL 0x0004 /* Slave Transmit Data Valid */ #define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ #define GEN 0x0010 /* General Call Adrress Matching Enabled */ /* TWI_SLAVE_STAT Masks */ #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ #define GCALL 0x0002 /* General Call Indicator */ /* TWI_MASTER_CTRL Masks */ #define MEN 0x0001 /* Master Mode Enable */ #define MADD_LEN 0x0002 /* Master Address Length */ #define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ #define FAST 0x0008 /* Use Fast Mode Timing Specs */ #define STOP 0x0010 /* Issue Stop Condition */ #define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ #define DCNT 0x3FC0 /* Data Bytes To Transfer */ #define SDAOVR 0x4000 /* Serial Data Override */ #define SCLOVR 0x8000 /* Serial Clock Override */ /* TWI_MASTER_STAT Masks */ #define MPROG 0x0001 /* Master Transfer In Progress */ #define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ #define ANAK 0x0004 /* Address Not Acknowledged */ #define DNAK 0x0008 /* Data Not Acknowledged */ #define BUFRDERR 0x0010 /* Buffer Read Error */ #define BUFWRERR 0x0020 /* Buffer Write Error */ #define SDASEN 0x0040 /* Serial Data Sense */ #define SCLSEN 0x0080 /* Serial Clock Sense */ #define BUSBUSY 0x0100 /* Bus Busy Indicator */ /* TWI_INT_SRC and TWI_INT_ENABLE Masks */ #define SINIT 0x0001 /* Slave Transfer Initiated */ #define SCOMP 0x0002 /* Slave Transfer Complete */ #define SERR 0x0004 /* Slave Transfer Error */ #define SOVF 0x0008 /* Slave Overflow */ #define MCOMP 0x0010 /* Master Transfer Complete */ #define MERR 0x0020 /* Master Transfer Error */ #define XMTSERV 0x0040 /* Transmit FIFO Service */ #define RCVSERV 0x0080 /* Receive FIFO Service */ /* TWI_FIFO_CTRL Masks */ #define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ #define RCVFLUSH 0x0002 /* Receive Buffer Flush */ #define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ #define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ /* TWI_FIFO_STAT Masks */ #define XMTSTAT 0x0003 /* Transmit FIFO Status */ #define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ #define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ #define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ #define RCVSTAT 0x000C /* Receive FIFO Status */ #define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ #define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ #define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ /* ************ CONTROLLER AREA NETWORK (CAN) MASKS ***************/ /* CAN_CONTROL Masks */ #define SRS 0x0001 /* Software Reset */ #define DNM 0x0002 /* Device Net Mode */ #define ABO 0x0004 /* Auto-Bus On Enable */ #define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */ #define SMR 0x0020 /* Sleep Mode Request */ #define CSR 0x0040 /* CAN Suspend Mode Request */ #define CCR 0x0080 /* CAN Configuration Mode Request */ /* CAN_STATUS Masks */ #define WT 0x0001 /* TX Warning Flag */ #define WR 0x0002 /* RX Warning Flag */ #define EP 0x0004 /* Error Passive Mode */ #define EBO 0x0008 /* Error Bus Off Mode */ #define CSA 0x0040 /* Suspend Mode Acknowledge */ #define CCA 0x0080 /* Configuration Mode Acknowledge */ #define MBPTR 0x1F00 /* Mailbox Pointer */ #define TRM 0x4000 /* Transmit Mode */ #define REC 0x8000 /* Receive Mode */ /* CAN_CLOCK Masks */ #define BRP 0x03FF /* Bit-Rate Pre-Scaler */ /* CAN_TIMING Masks */ #define TSEG1 0x000F /* Time Segment 1 */ #define TSEG2 0x0070 /* Time Segment 2 */ #define SAM 0x0080 /* Sampling */ #define SJW 0x0300 /* Synchronization Jump Width */ /* CAN_DEBUG Masks */ #define DEC 0x0001 /* Disable CAN Error Counters */ #define DRI 0x0002 /* Disable CAN RX Input */ #define DTO 0x0004 /* Disable CAN TX Output */ #define DIL 0x0008 /* Disable CAN Internal Loop */ #define MAA 0x0010 /* Mode Auto-Acknowledge Enable */ #define MRB 0x0020 /* Mode Read Back Enable */ #define CDE 0x8000 /* CAN Debug Enable */ /* CAN_CEC Masks */ #define RXECNT 0x00FF /* Receive Error Counter */ #define TXECNT 0xFF00 /* Transmit Error Counter */ /* CAN_INTR Masks */ #define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */ #define MBRIF MBRIRQ /* legacy */ #define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */ #define MBTIF MBTIRQ /* legacy */ #define GIRQ 0x0004 /* Global Interrupt */ #define SMACK 0x0008 /* Sleep Mode Acknowledge */ #define CANTX 0x0040 /* CAN TX Bus Value */ #define CANRX 0x0080 /* CAN RX Bus Value */ /* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */ #define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */ #define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */ #define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */ #define BASEID 0x1FFC /* Base Identifier */ #define IDE 0x2000 /* Identifier Extension */ #define RTR 0x4000 /* Remote Frame Transmission Request */ #define AME 0x8000 /* Acceptance Mask Enable */ /* CAN_MBxx_TIMESTAMP Masks */ #define TSV 0xFFFF /* Timestamp */ /* CAN_MBxx_LENGTH Masks */ #define DLC 0x000F /* Data Length Code */ /* CAN_AMxxH and CAN_AMxxL Masks */ #define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */ #define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */ #define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */ #define BASEID 0x1FFC /* Base Identifier */ #define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */ #define FMD 0x4000 /* Full Mask Data Field Enable */ #define FDF 0x8000 /* Filter On Data Field Enable */ /* CAN_MC1 Masks */ #define MC0 0x0001 /* Enable Mailbox 0 */ #define MC1 0x0002 /* Enable Mailbox 1 */ #define MC2 0x0004 /* Enable Mailbox 2 */ #define MC3 0x0008 /* Enable Mailbox 3 */ #define MC4 0x0010 /* Enable Mailbox 4 */ #define MC5 0x0020 /* Enable Mailbox 5 */ #define MC6 0x0040 /* Enable Mailbox 6 */ #define MC7 0x0080 /* Enable Mailbox 7 */ #define MC8 0x0100 /* Enable Mailbox 8 */ #define MC9 0x0200 /* Enable Mailbox 9 */ #define MC10 0x0400 /* Enable Mailbox 10 */ #define MC11 0x0800 /* Enable Mailbox 11 */ #define MC12 0x1000 /* Enable Mailbox 12 */ #define MC13 0x2000 /* Enable Mailbox 13 */ #define MC14 0x4000 /* Enable Mailbox 14 */ #define MC15 0x8000 /* Enable Mailbox 15 */ /* CAN_MC2 Masks */ #define MC16 0x0001 /* Enable Mailbox 16 */ #define MC17 0x0002 /* Enable Mailbox 17 */ #define MC18 0x0004 /* Enable Mailbox 18 */ #define MC19 0x0008 /* Enable Mailbox 19 */ #define MC20 0x0010 /* Enable Mailbox 20 */ #define MC21 0x0020 /* Enable Mailbox 21 */ #define MC22 0x0040 /* Enable Mailbox 22 */ #define MC23 0x0080 /* Enable Mailbox 23 */ #define MC24 0x0100 /* Enable Mailbox 24 */ #define MC25 0x0200 /* Enable Mailbox 25 */ #define MC26 0x0400 /* Enable Mailbox 26 */ #define MC27 0x0800 /* Enable Mailbox 27 */ #define MC28 0x1000 /* Enable Mailbox 28 */ #define MC29 0x2000 /* Enable Mailbox 29 */ #define MC30 0x4000 /* Enable Mailbox 30 */ #define MC31 0x8000 /* Enable Mailbox 31 */ /* CAN_MD1 Masks */ #define MD0 0x0001 /* Enable Mailbox 0 For Receive */ #define MD1 0x0002 /* Enable Mailbox 1 For Receive */ #define MD2 0x0004 /* Enable Mailbox 2 For Receive */ #define MD3 0x0008 /* Enable Mailbox 3 For Receive */ #define MD4 0x0010 /* Enable Mailbox 4 For Receive */ #define MD5 0x0020 /* Enable Mailbox 5 For Receive */ #define MD6 0x0040 /* Enable Mailbox 6 For Receive */ #define MD7 0x0080 /* Enable Mailbox 7 For Receive */ #define MD8 0x0100 /* Enable Mailbox 8 For Receive */ #define MD9 0x0200 /* Enable Mailbox 9 For Receive */ #define MD10 0x0400 /* Enable Mailbox 10 For Receive */ #define MD11 0x0800 /* Enable Mailbox 11 For Receive */ #define MD12 0x1000 /* Enable Mailbox 12 For Receive */ #define MD13 0x2000 /* Enable Mailbox 13 For Receive */ #define MD14 0x4000 /* Enable Mailbox 14 For Receive */ #define MD15 0x8000 /* Enable Mailbox 15 For Receive */ /* CAN_MD2 Masks */ #define MD16 0x0001 /* Enable Mailbox 16 For Receive */ #define MD17 0x0002 /* Enable Mailbox 17 For Receive */ #define MD18 0x0004 /* Enable Mailbox 18 For Receive */ #define MD19 0x0008 /* Enable Mailbox 19 For Receive */ #define MD20 0x0010 /* Enable Mailbox 20 For Receive */ #define MD21 0x0020 /* Enable Mailbox 21 For Receive */ #define MD22 0x0040 /* Enable Mailbox 22 For Receive */ #define MD23 0x0080 /* Enable Mailbox 23 For Receive */ #define MD24 0x0100 /* Enable Mailbox 24 For Receive */ #define MD25 0x0200 /* Enable Mailbox 25 For Receive */ #define MD26 0x0400 /* Enable Mailbox 26 For Receive */ #define MD27 0x0800 /* Enable Mailbox 27 For Receive */ #define MD28 0x1000 /* Enable Mailbox 28 For Receive */ #define MD29 0x2000 /* Enable Mailbox 29 For Receive */ #define MD30 0x4000 /* Enable Mailbox 30 For Receive */ #define MD31 0x8000 /* Enable Mailbox 31 For Receive */ /* CAN_RMP1 Masks */ #define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */ #define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */ #define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */ #define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */ #define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */ #define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */ #define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */ #define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */ #define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */ #define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */ #define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */ #define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */ #define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */ #define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */ #define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */ #define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */ /* CAN_RMP2 Masks */ #define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */ #define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */ #define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */ #define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */ #define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */ #define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */ #define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */ #define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */ #define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */ #define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */ #define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */ #define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */ #define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */ #define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */ #define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */ #define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */ /* CAN_RML1 Masks */ #define RML0 0x0001 /* RX Message Lost In Mailbox 0 */ #define RML1 0x0002 /* RX Message Lost In Mailbox 1 */ #define RML2 0x0004 /* RX Message Lost In Mailbox 2 */ #define RML3 0x0008 /* RX Message Lost In Mailbox 3 */ #define RML4 0x0010 /* RX Message Lost In Mailbox 4 */ #define RML5 0x0020 /* RX Message Lost In Mailbox 5 */ #define RML6 0x0040 /* RX Message Lost In Mailbox 6 */ #define RML7 0x0080 /* RX Message Lost In Mailbox 7 */ #define RML8 0x0100 /* RX Message Lost In Mailbox 8 */ #define RML9 0x0200 /* RX Message Lost In Mailbox 9 */ #define RML10 0x0400 /* RX Message Lost In Mailbox 10 */ #define RML11 0x0800 /* RX Message Lost In Mailbox 11 */ #define RML12 0x1000 /* RX Message Lost In Mailbox 12 */ #define RML13 0x2000 /* RX Message Lost In Mailbox 13 */ #define RML14 0x4000 /* RX Message Lost In Mailbox 14 */ #define RML15 0x8000 /* RX Message Lost In Mailbox 15 */ /* CAN_RML2 Masks */ #define RML16 0x0001 /* RX Message Lost In Mailbox 16 */ #define RML17 0x0002 /* RX Message Lost In Mailbox 17 */ #define RML18 0x0004 /* RX Message Lost In Mailbox 18 */ #define RML19 0x0008 /* RX Message Lost In Mailbox 19 */ #define RML20 0x0010 /* RX Message Lost In Mailbox 20 */ #define RML21 0x0020 /* RX Message Lost In Mailbox 21 */ #define RML22 0x0040 /* RX Message Lost In Mailbox 22 */ #define RML23 0x0080 /* RX Message Lost In Mailbox 23 */ #define RML24 0x0100 /* RX Message Lost In Mailbox 24 */ #define RML25 0x0200 /* RX Message Lost In Mailbox 25 */ #define RML26 0x0400 /* RX Message Lost In Mailbox 26 */ #define RML27 0x0800 /* RX Message Lost In Mailbox 27 */ #define RML28 0x1000 /* RX Message Lost In Mailbox 28 */ #define RML29 0x2000 /* RX Message Lost In Mailbox 29 */ #define RML30 0x4000 /* RX Message Lost In Mailbox 30 */ #define RML31 0x8000 /* RX Message Lost In Mailbox 31 */ /* CAN_OPSS1 Masks */ #define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */ #define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */ #define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */ #define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */ #define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */ #define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */ #define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */ #define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */ #define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */ #define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */ #define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */ #define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */ #define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */ #define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */ #define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */ #define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */ /* CAN_OPSS2 Masks */ #define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */ #define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */ #define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */ #define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */ #define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */ #define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */ #define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */ #define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */ #define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */ #define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */ #define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */ #define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */ #define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */ #define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */ #define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */ #define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */ /* CAN_TRR1 Masks */ #define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */ #define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */ #define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */ #define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */ #define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */ #define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */ #define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */ #define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */ #define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */ #define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */ #define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */ #define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */ #define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */ #define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */ #define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */ #define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */ /* CAN_TRR2 Masks */ #define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */ #define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */ #define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */ #define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */ #define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */ #define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */ #define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */ #define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */ #define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */ #define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */ #define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */ #define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */ #define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */ #define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */ #define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */ #define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */ /* CAN_TRS1 Masks */ #define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */ #define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */ #define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */ #define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */ #define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */ #define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */ #define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */ #define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */ #define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */ #define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */ #define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */ #define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */ #define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */ #define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */ #define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */ #define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */ /* CAN_TRS2 Masks */ #define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */ #define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */ #define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */ #define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */ #define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */ #define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */ #define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */ #define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */ #define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */ #define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */ #define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */ #define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */ #define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */ #define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */ #define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */ #define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */ /* CAN_AA1 Masks */ #define AA0 0x0001 /* Aborted Message In Mailbox 0 */ #define AA1 0x0002 /* Aborted Message In Mailbox 1 */ #define AA2 0x0004 /* Aborted Message In Mailbox 2 */ #define AA3 0x0008 /* Aborted Message In Mailbox 3 */ #define AA4 0x0010 /* Aborted Message In Mailbox 4 */ #define AA5 0x0020 /* Aborted Message In Mailbox 5 */ #define AA6 0x0040 /* Aborted Message In Mailbox 6 */ #define AA7 0x0080 /* Aborted Message In Mailbox 7 */ #define AA8 0x0100 /* Aborted Message In Mailbox 8 */ #define AA9 0x0200 /* Aborted Message In Mailbox 9 */ #define AA10 0x0400 /* Aborted Message In Mailbox 10 */ #define AA11 0x0800 /* Aborted Message In Mailbox 11 */ #define AA12 0x1000 /* Aborted Message In Mailbox 12 */ #define AA13 0x2000 /* Aborted Message In Mailbox 13 */ #define AA14 0x4000 /* Aborted Message In Mailbox 14 */ #define AA15 0x8000 /* Aborted Message In Mailbox 15 */ /* CAN_AA2 Masks */ #define AA16 0x0001 /* Aborted Message In Mailbox 16 */ #define AA17 0x0002 /* Aborted Message In Mailbox 17 */ #define AA18 0x0004 /* Aborted Message In Mailbox 18 */ #define AA19 0x0008 /* Aborted Message In Mailbox 19 */ #define AA20 0x0010 /* Aborted Message In Mailbox 20 */ #define AA21 0x0020 /* Aborted Message In Mailbox 21 */ #define AA22 0x0040 /* Aborted Message In Mailbox 22 */ #define AA23 0x0080 /* Aborted Message In Mailbox 23 */ #define AA24 0x0100 /* Aborted Message In Mailbox 24 */ #define AA25 0x0200 /* Aborted Message In Mailbox 25 */ #define AA26 0x0400 /* Aborted Message In Mailbox 26 */ #define AA27 0x0800 /* Aborted Message In Mailbox 27 */ #define AA28 0x1000 /* Aborted Message In Mailbox 28 */ #define AA29 0x2000 /* Aborted Message In Mailbox 29 */ #define AA30 0x4000 /* Aborted Message In Mailbox 30 */ #define AA31 0x8000 /* Aborted Message In Mailbox 31 */ /* CAN_TA1 Masks */ #define TA0 0x0001 /* Transmit Successful From Mailbox 0 */ #define TA1 0x0002 /* Transmit Successful From Mailbox 1 */ #define TA2 0x0004 /* Transmit Successful From Mailbox 2 */ #define TA3 0x0008 /* Transmit Successful From Mailbox 3 */ #define TA4 0x0010 /* Transmit Successful From Mailbox 4 */ #define TA5 0x0020 /* Transmit Successful From Mailbox 5 */ #define TA6 0x0040 /* Transmit Successful From Mailbox 6 */ #define TA7 0x0080 /* Transmit Successful From Mailbox 7 */ #define TA8 0x0100 /* Transmit Successful From Mailbox 8 */ #define TA9 0x0200 /* Transmit Successful From Mailbox 9 */ #define TA10 0x0400 /* Transmit Successful From Mailbox 10 */ #define TA11 0x0800 /* Transmit Successful From Mailbox 11 */ #define TA12 0x1000 /* Transmit Successful From Mailbox 12 */ #define TA13 0x2000 /* Transmit Successful From Mailbox 13 */ #define TA14 0x4000 /* Transmit Successful From Mailbox 14 */ #define TA15 0x8000 /* Transmit Successful From Mailbox 15 */ /* CAN_TA2 Masks */ #define TA16 0x0001 /* Transmit Successful From Mailbox 16 */ #define TA17 0x0002 /* Transmit Successful From Mailbox 17 */ #define TA18 0x0004 /* Transmit Successful From Mailbox 18 */ #define TA19 0x0008 /* Transmit Successful From Mailbox 19 */ #define TA20 0x0010 /* Transmit Successful From Mailbox 20 */ #define TA21 0x0020 /* Transmit Successful From Mailbox 21 */ #define TA22 0x0040 /* Transmit Successful From Mailbox 22 */ #define TA23 0x0080 /* Transmit Successful From Mailbox 23 */ #define TA24 0x0100 /* Transmit Successful From Mailbox 24 */ #define TA25 0x0200 /* Transmit Successful From Mailbox 25 */ #define TA26 0x0400 /* Transmit Successful From Mailbox 26 */ #define TA27 0x0800 /* Transmit Successful From Mailbox 27 */ #define TA28 0x1000 /* Transmit Successful From Mailbox 28 */ #define TA29 0x2000 /* Transmit Successful From Mailbox 29 */ #define TA30 0x4000 /* Transmit Successful From Mailbox 30 */ #define TA31 0x8000 /* Transmit Successful From Mailbox 31 */ /* CAN_MBTD Masks */ #define TDPTR 0x001F /* Mailbox To Temporarily Disable */ #define TDA 0x0040 /* Temporary Disable Acknowledge */ #define TDR 0x0080 /* Temporary Disable Request */ /* CAN_RFH1 Masks */ #define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */ #define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */ #define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */ #define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */ #define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */ #define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */ #define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */ #define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */ #define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */ #define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */ #define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */ #define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */ #define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */ #define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */ #define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */ #define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */ /* CAN_RFH2 Masks */ #define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */ #define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */ #define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */ #define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */ #define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */ #define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */ #define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */ #define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */ #define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */ #define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */ #define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */ #define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */ #define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */ #define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */ #define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */ #define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */ /* CAN_MBTIF1 Masks */ #define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */ #define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */ #define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */ #define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */ #define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */ #define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */ #define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */ #define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */ #define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */ #define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */ #define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */ #define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */ #define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */ #define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */ #define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */ #define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */ /* CAN_MBTIF2 Masks */ #define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */ #define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */ #define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */ #define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */ #define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */ #define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */ #define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */ #define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */ #define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */ #define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */ #define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */ #define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */ #define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */ #define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */ #define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */ #define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */ /* CAN_MBRIF1 Masks */ #define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */ #define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */ #define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */ #define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */ #define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */ #define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */ #define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */ #define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */ #define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */ #define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */ #define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */ #define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */ #define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */ #define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */ #define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */ #define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */ /* CAN_MBRIF2 Masks */ #define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */ #define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */ #define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */ #define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */ #define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */ #define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */ #define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */ #define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */ #define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */ #define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */ #define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */ #define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */ #define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */ #define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */ #define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */ #define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */ /* CAN_MBIM1 Masks */ #define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */ #define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */ #define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */ #define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */ #define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */ #define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */ #define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */ #define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */ #define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */ #define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */ #define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */ #define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */ #define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */ #define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */ #define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */ #define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */ /* CAN_MBIM2 Masks */ #define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */ #define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */ #define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */ #define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */ #define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */ #define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */ #define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */ #define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */ #define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */ #define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */ #define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */ #define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */ #define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */ #define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */ #define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */ #define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */ /* CAN_GIM Masks */ #define EWTIM 0x0001 /* Enable TX Error Count Interrupt */ #define EWRIM 0x0002 /* Enable RX Error Count Interrupt */ #define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */ #define BOIM 0x0008 /* Enable Bus Off Interrupt */ #define WUIM 0x0010 /* Enable Wake-Up Interrupt */ #define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */ #define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */ #define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */ #define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */ #define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */ #define ADIM 0x0400 /* Enable Access Denied Interrupt */ /* CAN_GIS Masks */ #define EWTIS 0x0001 /* TX Error Count IRQ Status */ #define EWRIS 0x0002 /* RX Error Count IRQ Status */ #define EPIS 0x0004 /* Error-Passive Mode IRQ Status */ #define BOIS 0x0008 /* Bus Off IRQ Status */ #define WUIS 0x0010 /* Wake-Up IRQ Status */ #define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */ #define AAIS 0x0040 /* Abort Acknowledge IRQ Status */ #define RMLIS 0x0080 /* RX Message Lost IRQ Status */ #define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */ #define EXTIS 0x0200 /* External Trigger Output IRQ Status */ #define ADIS 0x0400 /* Access Denied IRQ Status */ /* CAN_GIF Masks */ #define EWTIF 0x0001 /* TX Error Count IRQ Flag */ #define EWRIF 0x0002 /* RX Error Count IRQ Flag */ #define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */ #define BOIF 0x0008 /* Bus Off IRQ Flag */ #define WUIF 0x0010 /* Wake-Up IRQ Flag */ #define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */ #define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */ #define RMLIF 0x0080 /* RX Message Lost IRQ Flag */ #define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */ #define EXTIF 0x0200 /* External Trigger Output IRQ Flag */ #define ADIF 0x0400 /* Access Denied IRQ Flag */ /* CAN_UCCNF Masks */ #define UCCNF 0x000F /* Universal Counter Mode */ #define UC_STAMP 0x0001 /* Timestamp Mode */ #define UC_WDOG 0x0002 /* Watchdog Mode */ #define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */ #define UC_ERROR 0x0006 /* CAN Error Frame Count */ #define UC_OVER 0x0007 /* CAN Overload Frame Count */ #define UC_LOST 0x0008 /* Arbitration Lost During TX Count */ #define UC_AA 0x0009 /* TX Abort Count */ #define UC_TA 0x000A /* TX Successful Count */ #define UC_REJECT 0x000B /* RX Message Rejected Count */ #define UC_RML 0x000C /* RX Message Lost Count */ #define UC_RX 0x000D /* Total Successful RX Messages Count */ #define UC_RMP 0x000E /* Successful RX W/Matching ID Count */ #define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */ #define UCRC 0x0020 /* Universal Counter Reload/Clear */ #define UCCT 0x0040 /* Universal Counter CAN Trigger */ #define UCE 0x0080 /* Universal Counter Enable */ /* CAN_ESR Masks */ #define ACKE 0x0004 /* Acknowledge Error */ #define SER 0x0008 /* Stuff Error */ #define CRCE 0x0010 /* CRC Error */ #define SA0 0x0020 /* Stuck At Dominant Error */ #define BEF 0x0040 /* Bit Error Flag */ #define FER 0x0080 /* Form Error Flag */ /* CAN_EWR Masks */ #define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */ #define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */ /* ******************* PIN CONTROL REGISTER MASKS ************************/ /* PORT_MUX Masks */ #define PJSE 0x0001 /* Port J SPI/SPORT Enable */ #define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ #define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ #ifdef _MISRA_RULES #define PJCE(x) (((x)&0x3u)<<1) /* Port J CAN/SPI/SPORT Enable */ #else #define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ #endif /* _MISRA_RULES */ #define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ #define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ #define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ #define PFDE 0x0008 /* Port F DMA Request Enable */ #define PFDE_UART 0x0000 /* Enable UART0 RX/TX */ #define PFDE_DMA 0x0008 /* Enable DMAR1:0 */ #define PFTE 0x0010 /* Port F Timer Enable */ #define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ #define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ #define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ #define PFS6E_TIMER 0x0000 /* Enable TMR5 */ #define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ #define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ #define PFS5E_TIMER 0x0000 /* Enable TMR4 */ #define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ #define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ #define PFS4E_TIMER 0x0000 /* Enable TMR3 */ #define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ #define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ #define PFFE_TIMER 0x0000 /* Enable TMR2 */ #define PFFE_PPI 0x0100 /* Enable PPI FS3 */ #define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ #define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ #define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ #define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ #define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ #define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ #define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ #define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ #define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ /* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/ /* HDMAx_CTL Masks */ #define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ #define REP 0x0002 /* HDMA Request Polarity */ #define UTE 0x0004 /* Urgency Threshold Enable */ #define OIE 0x0010 /* Overflow Interrupt Enable */ #define BDIE 0x0020 /* Block Done Interrupt Enable */ #define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ #define DRQ 0x0300 /* HDMA Request Type */ #define DRQ_NONE 0x0000 /* No Request */ #define DRQ_SINGLE 0x0100 /* Channels Request Single */ #define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ #define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ #define RBC 0x1000 /* Reload BCNT With IBCNT */ #define PS 0x2000 /* HDMA Pin Status */ #define OI 0x4000 /* Overflow Interrupt Generated */ #define BDI 0x8000 /* Block Done Interrupt Generated */ /* entry addresses of the user-callable Boot ROM functions */ #define _BOOTROM_RESET 0xEF000000 #define _BOOTROM_FINAL_INIT 0xEF000002 #define _BOOTROM_DO_MEMORY_DMA 0xEF000006 #define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 #define _BOOTROM_BOOT_DXE_SPI 0xEF00000A #define _BOOTROM_BOOT_DXE_TWI 0xEF00000C #define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 #define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 #define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 /* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ #define PGDE_UART PFDE_UART #define PGDE_DMA PFDE_DMA #define CKELOW SCKELOW #ifdef _MISRA_RULES #pragma diag(pop) #endif /* _MISRA_RULES */ #endif /* _DEF_BF534_H */
Go to most recent revision | Compare with Previous | Blame | View Log