OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.18.0/] [libgloss/] [bfin/] [include/] [defBF561.h] - Rev 231

Go to most recent revision | Compare with Previous | Blame | View Log

/*
 * The authors hereby grant permission to use, copy, modify, distribute,
 * and license this software and its documentation for any purpose, provided
 * that existing copyright notices are retained in all copies and that this
 * notice is included verbatim in any distributions. No written agreement,
 * license, or royalty fee is required for any of the authorized uses.
 * Modifications to this software may be copyrighted by their authors
 * and need not follow the licensing terms described here, provided that
 * the new terms are clearly indicated on the first page of each file where
 * they apply.
 */
 
/************************************************************************
 *
 * defBF561.h
 *
 * Copyright (C) 2008, 2009 Analog Devices, Inc.
 *
 ************************************************************************/
 
/* SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 */
 
#ifndef _DEF_BF561_H
#define _DEF_BF561_H
 
#if !defined(__ADSPBF561__)
#warning defBF561.h should only be included for BF561 chip.
#endif
/* include all Core registers and bit definitions */
#include <def_LPBlackfin.h>
 
#ifdef _MISRA_RULES
#pragma diag(push)
#pragma diag(suppress:misra_rule_19_4)
#pragma diag(suppress:misra_rule_19_7)
#endif /* _MISRA_RULES */
 
/*********************************************************************************** */
/* System MMR Register Map */
/*********************************************************************************** */
 
/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
 
#define PLL_CTL                 0xFFC00000      /* PLL Control register (16-bit) */
#define PLL_DIV                 0xFFC00004      /* PLL Divide Register (16-bit) */
#define VR_CTL                  0xFFC00008      /* Voltage Regulator Control Register (16-bit) */
#define PLL_STAT                0xFFC0000C      /* PLL Status register (16-bit) */
#define PLL_LOCKCNT             0xFFC00010      /* PLL Lock Count register (16-bit) */
#define CHIPID                  0xFFC00014      /* Device ID Register */
 
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define SICA_SWRST              0xFFC00100      /* Software Reset register */
#define SICA_SYSCR              0xFFC00104      /* System Reset Configuration register */
#define SICA_RVECT              0xFFC00108      /* SIC Reset Vector Address Register */
#define SICA_IMASK              0xFFC0010C      /* SIC Interrupt Mask register 0 - hack to fix old tests */
#define SICA_IMASK0             0xFFC0010C      /* SIC Interrupt Mask register 0 */
#define SICA_IMASK1             0xFFC00110      /* SIC Interrupt Mask register 1 */
#define SICA_IAR0               0xFFC00124      /* SIC Interrupt Assignment Register 0 */
#define SICA_IAR1               0xFFC00128      /* SIC Interrupt Assignment Register 1 */
#define SICA_IAR2               0xFFC0012C      /* SIC Interrupt Assignment Register 2 */
#define SICA_IAR3               0xFFC00130      /* SIC Interrupt Assignment Register 3 */
#define SICA_IAR4               0xFFC00134      /* SIC Interrupt Assignment Register 4 */
#define SICA_IAR5               0xFFC00138      /* SIC Interrupt Assignment Register 5 */
#define SICA_IAR6               0xFFC0013C      /* SIC Interrupt Assignment Register 6 */
#define SICA_IAR7               0xFFC00140      /* SIC Interrupt Assignment Register 7 */
#define SICA_ISR0               0xFFC00114      /* SIC Interrupt Status register 0 */
#define SICA_ISR1               0xFFC00118      /* SIC Interrupt Status register 1 */
#define SICA_IWR0               0xFFC0011C      /* SIC Interrupt Wakeup-Enable register 0 */
#define SICA_IWR1               0xFFC00120      /* SIC Interrupt Wakeup-Enable register 1 */
 
 
/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */
#define SICB_SWRST              0xFFC01100      /* reserved */
#define SICB_SYSCR              0xFFC01104      /* reserved */
#define SICB_RVECT              0xFFC01108      /* SIC Reset Vector Address Register */
#define SICB_IMASK0             0xFFC0110C      /* SIC Interrupt Mask register 0 */
#define SICB_IMASK1             0xFFC01110      /* SIC Interrupt Mask register 1 */
#define SICB_IAR0               0xFFC01124      /* SIC Interrupt Assignment Register 0 */
#define SICB_IAR1               0xFFC01128      /* SIC Interrupt Assignment Register 1 */
#define SICB_IAR2               0xFFC0112C      /* SIC Interrupt Assignment Register 2 */
#define SICB_IAR3               0xFFC01130      /* SIC Interrupt Assignment Register 3 */
#define SICB_IAR4               0xFFC01134      /* SIC Interrupt Assignment Register 4 */
#define SICB_IAR5               0xFFC01138      /* SIC Interrupt Assignment Register 5 */
#define SICB_IAR6               0xFFC0113C      /* SIC Interrupt Assignment Register 6 */
#define SICB_IAR7               0xFFC01140      /* SIC Interrupt Assignment Register 7 */
#define SICB_ISR0               0xFFC01114      /* SIC Interrupt Status register 0 */
#define SICB_ISR1               0xFFC01118      /* SIC Interrupt Status register 1 */
#define SICB_IWR0               0xFFC0111C      /* SIC Interrupt Wakeup-Enable register 0 */
#define SICB_IWR1               0xFFC01120      /* SIC Interrupt Wakeup-Enable register 1 */
 
 
/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
#define WDOGA_CTL 				0xFFC00200 		/* Watchdog Control register */
#define WDOGA_CNT 				0xFFC00204 		/* Watchdog Count register */
#define WDOGA_STAT 				0xFFC00208 		/* Watchdog Status register */
 
 
/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */
#define WDOGB_CTL 				0xFFC01200 		/* Watchdog Control register */
#define WDOGB_CNT 				0xFFC01204 		/* Watchdog Count register */
#define WDOGB_STAT 				0xFFC01208 		/* Watchdog Status register */
 
 
/* UART Controller (0xFFC00400 - 0xFFC004FF) */
#define UART_THR             	0xFFC00400  /* Transmit Holding register */
#define UART_RBR             	0xFFC00400  /* Receive Buffer register */
#define UART_DLL              	0xFFC00400  /* Divisor Latch (Low-Byte) */
#define UART_IER              	0xFFC00404  /* Interrupt Enable Register */
#define UART_DLH              	0xFFC00404  /* Divisor Latch (High-Byte) */
#define UART_IIR              	0xFFC00408  /* Interrupt Identification Register */
#define UART_LCR              	0xFFC0040C  /* Line Control Register */
#define UART_MCR			 	0xFFC00410  /* Modem Control Register */
#define UART_LSR              	0xFFC00414  /* Line Status Register */
#define UART_MSR            	0xFFC00418  /* Modem Status Register */
#define UART_SCR              	0xFFC0041C  /* SCR Scratch Register */
#define UART_GCTL      	      	0xFFC00424  /* Global Control Register */
 
 
/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
#define SPI_CTL               		0xFFC00500  /* SPI Control Register */
#define SPI_FLG               		0xFFC00504  /* SPI Flag register */
#define SPI_STAT              		0xFFC00508  /* SPI Status register */
#define SPI_TDBR              		0xFFC0050C  /* SPI Transmit Data Buffer Register */
#define SPI_RDBR              		0xFFC00510  /* SPI Receive Data Buffer Register */
#define SPI_BAUD              		0xFFC00514  /* SPI Baud rate Register */
#define SPI_SHADOW            		0xFFC00518  /* SPI_RDBR Shadow Register */
 
 
/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */
#define TIMER0_CONFIG 				0xFFC00600 /* Timer0 Configuration register */
#define TIMER0_COUNTER 				0xFFC00604 /* Timer0 Counter register */
#define TIMER0_PERIOD 				0xFFC00608 /* Timer0 Period register */
#define TIMER0_WIDTH 				0xFFC0060C /* Timer0 Width register */
 
#define TIMER1_CONFIG 				0xFFC00610 /* Timer1 Configuration register */
#define TIMER1_COUNTER 				0xFFC00614 /* Timer1 Counter register */
#define TIMER1_PERIOD 				0xFFC00618 /* Timer1 Period register */
#define TIMER1_WIDTH 				0xFFC0061C /* Timer1 Width register */
 
#define TIMER2_CONFIG 				0xFFC00620 /* Timer2 Configuration register */
#define TIMER2_COUNTER 				0xFFC00624 /* Timer2 Counter register */
#define TIMER2_PERIOD 				0xFFC00628 /* Timer2 Period register */
#define TIMER2_WIDTH 				0xFFC0062C /* Timer2 Width register */
 
#define TIMER3_CONFIG 				0xFFC00630 /* Timer3 Configuration register */
#define TIMER3_COUNTER 				0xFFC00634 /* Timer3 Counter register */
#define TIMER3_PERIOD 				0xFFC00638 /* Timer3 Period register */
#define TIMER3_WIDTH 				0xFFC0063C /* Timer3 Width register */
 
#define TIMER4_CONFIG 				0xFFC00640 /* Timer4 Configuration register */
#define TIMER4_COUNTER 				0xFFC00644 /* Timer4 Counter register */
#define TIMER4_PERIOD 				0xFFC00648 /* Timer4 Period register */
#define TIMER4_WIDTH 				0xFFC0064C /* Timer4 Width register */
 
#define TIMER5_CONFIG 				0xFFC00650 /* Timer5 Configuration register */
#define TIMER5_COUNTER 				0xFFC00654 /* Timer5 Counter register */
#define TIMER5_PERIOD 				0xFFC00658 /* Timer5 Period register */
#define TIMER5_WIDTH 				0xFFC0065C /* Timer5 Width register */
 
#define TIMER6_CONFIG 				0xFFC00660 /* Timer6 Configuration register */
#define TIMER6_COUNTER 				0xFFC00664 /* Timer6 Counter register */
#define TIMER6_PERIOD 				0xFFC00668 /* Timer6 Period register */
#define TIMER6_WIDTH 				0xFFC0066C /* Timer6 Width register */
 
#define TIMER7_CONFIG 				0xFFC00670 /* Timer7 Configuration register */
#define TIMER7_COUNTER 				0xFFC00674 /* Timer7 Counter register */
#define TIMER7_PERIOD 				0xFFC00678 /* Timer7 Period register */
#define TIMER7_WIDTH 				0xFFC0067C /* Timer7 Width register */
 
#define TMRS8_ENABLE 				0xFFC00680 /* Timer Enable Register */
#define TMRS8_DISABLE 				0xFFC00684 /* Timer Disable register */
#define TMRS8_STATUS 				0xFFC00688 /* Timer Status register */
 
 
/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */
#define TIMER8_CONFIG 				0xFFC01600 /* Timer8 Configuration register */
#define TIMER8_COUNTER 				0xFFC01604 /* Timer8 Counter register */
#define TIMER8_PERIOD 				0xFFC01608 /* Timer8 Period register */
#define TIMER8_WIDTH 				0xFFC0160C /* Timer8 Width register */
 
#define TIMER9_CONFIG 				0xFFC01610 /* Timer9 Configuration register */
#define TIMER9_COUNTER 				0xFFC01614 /* Timer9 Counter register */
#define TIMER9_PERIOD 				0xFFC01618 /* Timer9 Period register */
#define TIMER9_WIDTH 				0xFFC0161C /* Timer9 Width register */
 
#define TIMER10_CONFIG 				0xFFC01620 /* Timer10 Configuration register */
#define TIMER10_COUNTER 			0xFFC01624 /* Timer10 Counter register */
#define TIMER10_PERIOD 				0xFFC01628 /* Timer10 Period register */
#define TIMER10_WIDTH 				0xFFC0162C /* Timer10 Width register */
 
#define TIMER11_CONFIG 				0xFFC01630 /* Timer11 Configuration register */
#define TIMER11_COUNTER 			0xFFC01634 /* Timer11 Counter register */
#define TIMER11_PERIOD 				0xFFC01638 /* Timer11 Period register */
#define TIMER11_WIDTH 				0xFFC0163C /* Timer11 Width register */
 
#define TMRS4_ENABLE 				0xFFC01640 /* Timer Enable Register */
#define TMRS4_DISABLE 				0xFFC01644 /* Timer Disable register */
#define TMRS4_STATUS 				0xFFC01648 /* Timer Status register */
 
 
/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
#define FIO0_FLAG_D 				0xFFC00700 /* Flag Data register */
#define FIO0_FLAG_C 				0xFFC00704 /* Flag Clear register */
#define FIO0_FLAG_S 				0xFFC00708 /* Flag Set register */
#define FIO0_FLAG_T 				0xFFC0070C /* Flag Toggle register */
#define FIO0_MASKA_D 				0xFFC00710 /* Flag Mask Interrupt A Data register */
#define FIO0_MASKA_C 				0xFFC00714 /* Flag Mask Interrupt A Clear register */
#define FIO0_MASKA_S 				0xFFC00718 /* Flag Mask Interrupt A Set register */
#define FIO0_MASKA_T 				0xFFC0071C /* Flag Mask Interrupt A Toggle register */
#define FIO0_MASKB_D 				0xFFC00720 /* Flag Mask Interrupt B Data register */
#define FIO0_MASKB_C 				0xFFC00724 /* Flag Mask Interrupt B Clear register */
#define FIO0_MASKB_S 				0xFFC00728 /* Flag Mask Interrupt B Set register */
#define FIO0_MASKB_T 				0xFFC0072C /* Flag Mask Interrupt B Toggle register */
#define FIO0_DIR 					0xFFC00730 /* Flag Direction register */
#define FIO0_POLAR 					0xFFC00734 /* Flag Polarity register */
#define FIO0_EDGE 					0xFFC00738 /* Flag Interrupt Sensitivity register */
#define FIO0_BOTH 					0xFFC0073C /* Flag Set on Both Edges register */
#define FIO0_INEN 					0xFFC00740 /* Flag Input Enable register */
 
 
/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */
#define FIO1_FLAG_D 				0xFFC01500 /* Flag Data register (mask used to directly */
#define FIO1_FLAG_C 				0xFFC01504 /* Flag Clear register */
#define FIO1_FLAG_S 				0xFFC01508 /* Flag Set register */
#define FIO1_FLAG_T 				0xFFC0150C /* Flag Toggle register (mask used to */
#define FIO1_MASKA_D 				0xFFC01510 /* Flag Mask Interrupt A Data register */
#define FIO1_MASKA_C 				0xFFC01514 /* Flag Mask Interrupt A Clear register */
#define FIO1_MASKA_S 				0xFFC01518 /* Flag Mask Interrupt A Set register */
#define FIO1_MASKA_T 				0xFFC0151C /* Flag Mask Interrupt A Toggle register */
#define FIO1_MASKB_D 				0xFFC01520 /* Flag Mask Interrupt B Data register */
#define FIO1_MASKB_C 				0xFFC01524 /* Flag Mask Interrupt B Clear register */
#define FIO1_MASKB_S 				0xFFC01528 /* Flag Mask Interrupt B Set register */
#define FIO1_MASKB_T 				0xFFC0152C /* Flag Mask Interrupt B Toggle register */
#define FIO1_DIR 					0xFFC01530 /* Flag Direction register */
#define FIO1_POLAR 					0xFFC01534 /* Flag Polarity register */
#define FIO1_EDGE 					0xFFC01538 /* Flag Interrupt Sensitivity register */
#define FIO1_BOTH 					0xFFC0153C /* Flag Set on Both Edges register */
#define FIO1_INEN 					0xFFC01540 /* Flag Input Enable register */
 
 
/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */
#define FIO2_FLAG_D 				0xFFC01700 /* Flag Data register (mask used to directly */
#define FIO2_FLAG_C 				0xFFC01704 /* Flag Clear register */
#define FIO2_FLAG_S 				0xFFC01708 /* Flag Set register */
#define FIO2_FLAG_T 				0xFFC0170C /* Flag Toggle register (mask used to */
#define FIO2_MASKA_D 				0xFFC01710 /* Flag Mask Interrupt A Data register */
#define FIO2_MASKA_C 				0xFFC01714 /* Flag Mask Interrupt A Clear register */
#define FIO2_MASKA_S 				0xFFC01718 /* Flag Mask Interrupt A Set register */
#define FIO2_MASKA_T 				0xFFC0171C /* Flag Mask Interrupt A Toggle register */
#define FIO2_MASKB_D 				0xFFC01720 /* Flag Mask Interrupt B Data register */
#define FIO2_MASKB_C 				0xFFC01724 /* Flag Mask Interrupt B Clear register */
#define FIO2_MASKB_S 				0xFFC01728 /* Flag Mask Interrupt B Set register */
#define FIO2_MASKB_T 				0xFFC0172C /* Flag Mask Interrupt B Toggle register */
#define FIO2_DIR 					0xFFC01730 /* Flag Direction register */
#define FIO2_POLAR 					0xFFC01734 /* Flag Polarity register */
#define FIO2_EDGE 					0xFFC01738 /* Flag Interrupt Sensitivity register */
#define FIO2_BOTH 					0xFFC0173C /* Flag Set on Both Edges register */
#define FIO2_INEN 					0xFFC01740 /* Flag Input Enable register */
 
 
/*// SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
#define SPORT0_TCR1     	 	0xFFC00800  /* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_TCR2      	 	0xFFC00804  /* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_TCLKDIV        		0xFFC00808  /* SPORT0 Transmit Clock Divider */
#define SPORT0_TFSDIV          		0xFFC0080C  /* SPORT0 Transmit Frame Sync Divider */
#define SPORT0_TX	             	0xFFC00810  /* SPORT0 TX Data Register */
#define SPORT0_RX	            	0xFFC00818  /* SPORT0 RX Data Register */
#define SPORT0_RCR1      	 		0xFFC00820  /* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_RCR2      	 		0xFFC00824  /* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_RCLKDIV        		0xFFC00828  /* SPORT0 Receive Clock Divider */
#define SPORT0_RFSDIV          		0xFFC0082C  /* SPORT0 Receive Frame Sync Divider */
#define SPORT0_STAT            		0xFFC00830  /* SPORT0 Status Register */
#define SPORT0_CHNL            		0xFFC00834  /* SPORT0 Current Channel Register */
#define SPORT0_MCMC1           		0xFFC00838  /* SPORT0 Multi-Channel Configuration Register 1 */
#define SPORT0_MCMC2           		0xFFC0083C  /* SPORT0 Multi-Channel Configuration Register 2 */
#define SPORT0_MTCS0           		0xFFC00840  /* SPORT0 Multi-Channel Transmit Select Register 0 */
#define SPORT0_MTCS1           		0xFFC00844  /* SPORT0 Multi-Channel Transmit Select Register 1 */
#define SPORT0_MTCS2           		0xFFC00848  /* SPORT0 Multi-Channel Transmit Select Register 2 */
#define SPORT0_MTCS3           		0xFFC0084C  /* SPORT0 Multi-Channel Transmit Select Register 3 */
#define SPORT0_MRCS0           		0xFFC00850  /* SPORT0 Multi-Channel Receive Select Register 0 */
#define SPORT0_MRCS1           		0xFFC00854  /* SPORT0 Multi-Channel Receive Select Register 1 */
#define SPORT0_MRCS2           		0xFFC00858  /* SPORT0 Multi-Channel Receive Select Register 2 */
#define SPORT0_MRCS3           		0xFFC0085C  /* SPORT0 Multi-Channel Receive Select Register 3 */
 
 
/*// SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
#define SPORT1_TCR1     	 		0xFFC00900  /* SPORT1 Transmit Configuration 1 Register */
#define SPORT1_TCR2      	 		0xFFC00904  /* SPORT1 Transmit Configuration 2 Register */
#define SPORT1_TCLKDIV        		0xFFC00908  /* SPORT1 Transmit Clock Divider */
#define SPORT1_TFSDIV          		0xFFC0090C  /* SPORT1 Transmit Frame Sync Divider */
#define SPORT1_TX	             	0xFFC00910  /* SPORT1 TX Data Register */
#define SPORT1_RX	            	0xFFC00918  /* SPORT1 RX Data Register */
#define SPORT1_RCR1      	 		0xFFC00920  /* SPORT1 Transmit Configuration 1 Register */
#define SPORT1_RCR2      	 		0xFFC00924  /* SPORT1 Transmit Configuration 2 Register */
#define SPORT1_RCLKDIV        		0xFFC00928  /* SPORT1 Receive Clock Divider */
#define SPORT1_RFSDIV          		0xFFC0092C  /* SPORT1 Receive Frame Sync Divider */
#define SPORT1_STAT            		0xFFC00930  /* SPORT1 Status Register */
#define SPORT1_CHNL            		0xFFC00934  /* SPORT1 Current Channel Register */
#define SPORT1_MCMC1           		0xFFC00938  /* SPORT1 Multi-Channel Configuration Register 1 */
#define SPORT1_MCMC2           		0xFFC0093C  /* SPORT1 Multi-Channel Configuration Register 2 */
#define SPORT1_MTCS0           		0xFFC00940  /* SPORT1 Multi-Channel Transmit Select Register 0 */
#define SPORT1_MTCS1           		0xFFC00944  /* SPORT1 Multi-Channel Transmit Select Register 1 */
#define SPORT1_MTCS2           		0xFFC00948  /* SPORT1 Multi-Channel Transmit Select Register 2 */
#define SPORT1_MTCS3           		0xFFC0094C  /* SPORT1 Multi-Channel Transmit Select Register 3 */
#define SPORT1_MRCS0           		0xFFC00950  /* SPORT1 Multi-Channel Receive Select Register 0 */
#define SPORT1_MRCS1           		0xFFC00954  /* SPORT1 Multi-Channel Receive Select Register 1 */
#define SPORT1_MRCS2           		0xFFC00958  /* SPORT1 Multi-Channel Receive Select Register 2 */
#define SPORT1_MRCS3           		0xFFC0095C  /* SPORT1 Multi-Channel Receive Select Register 3 */
 
 
/* Asynchronous Memory Controller - External Bus Interface Unit  */
#define EBIU_AMGCTL					0xFFC00A00  /* Asynchronous Memory Global Control Register */
#define EBIU_AMBCTL0				0xFFC00A04  /* Asynchronous Memory Bank Control Register 0 */
#define EBIU_AMBCTL1				0xFFC00A08  /* Asynchronous Memory Bank Control Register 1 */
 
 
/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
#define EBIU_SDGCTL					0xFFC00A10  /* SDRAM Global Control Register */
#define EBIU_SDBCTL					0xFFC00A14  /* SDRAM Bank Control Register */
#define EBIU_SDRRC 					0xFFC00A18  /* SDRAM Refresh Rate Control Register */
#define EBIU_SDSTAT					0xFFC00A1C  /* SDRAM Status Register */
 
 
/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */
#define PPI0_CONTROL 				0xFFC01000 /* PPI0 Control register */
#define PPI0_STATUS 				0xFFC01004 /* PPI0 Status register */
#define PPI0_COUNT 					0xFFC01008 /* PPI0 Transfer Count register */
#define PPI0_DELAY 					0xFFC0100C /* PPI0 Delay Count register */
#define PPI0_FRAME 					0xFFC01010 /* PPI0 Frame Length register */
 
 
/*Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */
#define PPI1_CONTROL 				0xFFC01300 /* PPI1 Control register */
#define PPI1_STATUS 				0xFFC01304 /* PPI1 Status register */
#define PPI1_COUNT 					0xFFC01308 /* PPI1 Transfer Count register */
#define PPI1_DELAY 					0xFFC0130C /* PPI1 Delay Count register */
#define PPI1_FRAME 					0xFFC01310 /* PPI1 Frame Length register */
 
 
/*DMA traffic control registers */
#define	DMA1_TC_PER  0xFFC01B0C	/* Traffic control periods */
#define	DMA1_TC_CNT  0xFFC01B10	/* Traffic control current counts */
#define	DMA2_TC_PER  0xFFC00B0C	/* Traffic control periods */
#define	DMA2_TC_CNT  0xFFC00B10	/* Traffic control current counts	 */
 
 
/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
#define DMA1_0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */
#define DMA1_0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */
#define DMA1_0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */
#define DMA1_0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */
#define DMA1_0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */
#define DMA1_0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */
#define DMA1_0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */
#define DMA1_0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */
#define DMA1_0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */
#define DMA1_0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */
#define DMA1_0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */
#define DMA1_0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt/Status Register */
#define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */
 
#define DMA1_1_CONFIG 0xFFC01C48 /* DMA1 Channel 1 Configuration register */
#define DMA1_1_NEXT_DESC_PTR 0xFFC01C40 /* DMA1 Channel 1 Next Descripter Ptr Reg */
#define DMA1_1_START_ADDR 0xFFC01C44 /* DMA1 Channel 1 Start Address */
#define DMA1_1_X_COUNT 0xFFC01C50 /* DMA1 Channel 1 Inner Loop Count */
#define DMA1_1_Y_COUNT 0xFFC01C58 /* DMA1 Channel 1 Outer Loop Count */
#define DMA1_1_X_MODIFY 0xFFC01C54 /* DMA1 Channel 1 Inner Loop Addr Increment */
#define DMA1_1_Y_MODIFY 0xFFC01C5C /* DMA1 Channel 1 Outer Loop Addr Increment */
#define DMA1_1_CURR_DESC_PTR 0xFFC01C60 /* DMA1 Channel 1 Current Descriptor Pointer */
#define DMA1_1_CURR_ADDR 0xFFC01C64 /* DMA1 Channel 1 Current Address Pointer */
#define DMA1_1_CURR_X_COUNT 0xFFC01C70 /* DMA1 Channel 1 Current Inner Loop Count */
#define DMA1_1_CURR_Y_COUNT 0xFFC01C78 /* DMA1 Channel 1 Current Outer Loop Count */
#define DMA1_1_IRQ_STATUS 0xFFC01C68 /* DMA1 Channel 1 Interrupt/Status Register */
#define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C /* DMA1 Channel 1 Peripheral Map Register */
 
#define DMA1_2_CONFIG 0xFFC01C88 /* DMA1 Channel 2 Configuration register */
#define DMA1_2_NEXT_DESC_PTR 0xFFC01C80 /* DMA1 Channel 2 Next Descripter Ptr Reg */
#define DMA1_2_START_ADDR 0xFFC01C84 /* DMA1 Channel 2 Start Address */
#define DMA1_2_X_COUNT 0xFFC01C90 /* DMA1 Channel 2 Inner Loop Count */
#define DMA1_2_Y_COUNT 0xFFC01C98 /* DMA1 Channel 2 Outer Loop Count */
#define DMA1_2_X_MODIFY 0xFFC01C94 /* DMA1 Channel 2 Inner Loop Addr Increment */
#define DMA1_2_Y_MODIFY 0xFFC01C9C /* DMA1 Channel 2 Outer Loop Addr Increment */
#define DMA1_2_CURR_DESC_PTR 0xFFC01CA0 /* DMA1 Channel 2 Current Descriptor Pointer */
#define DMA1_2_CURR_ADDR 0xFFC01CA4 /* DMA1 Channel 2 Current Address Pointer */
#define DMA1_2_CURR_X_COUNT 0xFFC01CB0 /* DMA1 Channel 2 Current Inner Loop Count */
#define DMA1_2_CURR_Y_COUNT 0xFFC01CB8 /* DMA1 Channel 2 Current Outer Loop Count */
#define DMA1_2_IRQ_STATUS 0xFFC01CA8 /* DMA1 Channel 2 Interrupt/Status Register */
#define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC /* DMA1 Channel 2 Peripheral Map Register */
 
#define DMA1_3_CONFIG 0xFFC01CC8 /* DMA1 Channel 3 Configuration register */
#define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0 /* DMA1 Channel 3 Next Descripter Ptr Reg */
#define DMA1_3_START_ADDR 0xFFC01CC4 /* DMA1 Channel 3 Start Address */
#define DMA1_3_X_COUNT 0xFFC01CD0 /* DMA1 Channel 3 Inner Loop Count */
#define DMA1_3_Y_COUNT 0xFFC01CD8 /* DMA1 Channel 3 Outer Loop Count */
#define DMA1_3_X_MODIFY 0xFFC01CD4 /* DMA1 Channel 3 Inner Loop Addr Increment */
#define DMA1_3_Y_MODIFY 0xFFC01CDC /* DMA1 Channel 3 Outer Loop Addr Increment */
#define DMA1_3_CURR_DESC_PTR 0xFFC01CE0 /* DMA1 Channel 3 Current Descriptor Pointer */
#define DMA1_3_CURR_ADDR 0xFFC01CE4 /* DMA1 Channel 3 Current Address Pointer */
#define DMA1_3_CURR_X_COUNT 0xFFC01CF0 /* DMA1 Channel 3 Current Inner Loop Count */
#define DMA1_3_CURR_Y_COUNT 0xFFC01CF8 /* DMA1 Channel 3 Current Outer Loop Count */
#define DMA1_3_IRQ_STATUS 0xFFC01CE8 /* DMA1 Channel 3 Interrupt/Status Register */
#define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC /* DMA1 Channel 3 Peripheral Map Register */
 
#define DMA1_4_CONFIG 0xFFC01D08 /* DMA1 Channel 4 Configuration register */
#define DMA1_4_NEXT_DESC_PTR 0xFFC01D00 /* DMA1 Channel 4 Next Descripter Ptr Reg */
#define DMA1_4_START_ADDR 0xFFC01D04 /* DMA1 Channel 4 Start Address */
#define DMA1_4_X_COUNT 0xFFC01D10 /* DMA1 Channel 4 Inner Loop Count */
#define DMA1_4_Y_COUNT 0xFFC01D18 /* DMA1 Channel 4 Outer Loop Count */
#define DMA1_4_X_MODIFY 0xFFC01D14 /* DMA1 Channel 4 Inner Loop Addr Increment */
#define DMA1_4_Y_MODIFY 0xFFC01D1C /* DMA1 Channel 4 Outer Loop Addr Increment */
#define DMA1_4_CURR_DESC_PTR 0xFFC01D20 /* DMA1 Channel 4 Current Descriptor Pointer */
#define DMA1_4_CURR_ADDR 0xFFC01D24 /* DMA1 Channel 4 Current Address Pointer */
#define DMA1_4_CURR_X_COUNT 0xFFC01D30 /* DMA1 Channel 4 Current Inner Loop Count */
#define DMA1_4_CURR_Y_COUNT 0xFFC01D38 /* DMA1 Channel 4 Current Outer Loop Count */
#define DMA1_4_IRQ_STATUS 0xFFC01D28 /* DMA1 Channel 4 Interrupt/Status Register */
#define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C /* DMA1 Channel 4 Peripheral Map Register */
 
#define DMA1_5_CONFIG 0xFFC01D48 /* DMA1 Channel 5 Configuration register */
#define DMA1_5_NEXT_DESC_PTR 0xFFC01D40 /* DMA1 Channel 5 Next Descripter Ptr Reg */
#define DMA1_5_START_ADDR 0xFFC01D44 /* DMA1 Channel 5 Start Address */
#define DMA1_5_X_COUNT 0xFFC01D50 /* DMA1 Channel 5 Inner Loop Count */
#define DMA1_5_Y_COUNT 0xFFC01D58 /* DMA1 Channel 5 Outer Loop Count */
#define DMA1_5_X_MODIFY 0xFFC01D54 /* DMA1 Channel 5 Inner Loop Addr Increment */
#define DMA1_5_Y_MODIFY 0xFFC01D5C /* DMA1 Channel 5 Outer Loop Addr Increment */
#define DMA1_5_CURR_DESC_PTR 0xFFC01D60 /* DMA1 Channel 5 Current Descriptor Pointer */
#define DMA1_5_CURR_ADDR 0xFFC01D64 /* DMA1 Channel 5 Current Address Pointer */
#define DMA1_5_CURR_X_COUNT 0xFFC01D70 /* DMA1 Channel 5 Current Inner Loop Count */
#define DMA1_5_CURR_Y_COUNT 0xFFC01D78 /* DMA1 Channel 5 Current Outer Loop Count */
#define DMA1_5_IRQ_STATUS 0xFFC01D68 /* DMA1 Channel 5 Interrupt/Status Register */
#define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C /* DMA1 Channel 5 Peripheral Map Register */
 
#define DMA1_6_CONFIG 0xFFC01D88 /* DMA1 Channel 6 Configuration register */
#define DMA1_6_NEXT_DESC_PTR 0xFFC01D80 /* DMA1 Channel 6 Next Descripter Ptr Reg */
#define DMA1_6_START_ADDR 0xFFC01D84 /* DMA1 Channel 6 Start Address */
#define DMA1_6_X_COUNT 0xFFC01D90 /* DMA1 Channel 6 Inner Loop Count */
#define DMA1_6_Y_COUNT 0xFFC01D98 /* DMA1 Channel 6 Outer Loop Count */
#define DMA1_6_X_MODIFY 0xFFC01D94 /* DMA1 Channel 6 Inner Loop Addr Increment */
#define DMA1_6_Y_MODIFY 0xFFC01D9C /* DMA1 Channel 6 Outer Loop Addr Increment */
#define DMA1_6_CURR_DESC_PTR 0xFFC01DA0 /* DMA1 Channel 6 Current Descriptor Pointer */
#define DMA1_6_CURR_ADDR 0xFFC01DA4 /* DMA1 Channel 6 Current Address Pointer */
#define DMA1_6_CURR_X_COUNT 0xFFC01DB0 /* DMA1 Channel 6 Current Inner Loop Count */
#define DMA1_6_CURR_Y_COUNT 0xFFC01DB8 /* DMA1 Channel 6 Current Outer Loop Count */
#define DMA1_6_IRQ_STATUS 0xFFC01DA8 /* DMA1 Channel 6 Interrupt/Status Register */
#define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC /* DMA1 Channel 6 Peripheral Map Register */
 
#define DMA1_7_CONFIG 0xFFC01DC8 /* DMA1 Channel 7 Configuration register */
#define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0 /* DMA1 Channel 7 Next Descripter Ptr Reg */
#define DMA1_7_START_ADDR 0xFFC01DC4 /* DMA1 Channel 7 Start Address */
#define DMA1_7_X_COUNT 0xFFC01DD0 /* DMA1 Channel 7 Inner Loop Count */
#define DMA1_7_Y_COUNT 0xFFC01DD8 /* DMA1 Channel 7 Outer Loop Count */
#define DMA1_7_X_MODIFY 0xFFC01DD4 /* DMA1 Channel 7 Inner Loop Addr Increment */
#define DMA1_7_Y_MODIFY 0xFFC01DDC /* DMA1 Channel 7 Outer Loop Addr Increment */
#define DMA1_7_CURR_DESC_PTR 0xFFC01DE0 /* DMA1 Channel 7 Current Descriptor Pointer */
#define DMA1_7_CURR_ADDR 0xFFC01DE4 /* DMA1 Channel 7 Current Address Pointer */
#define DMA1_7_CURR_X_COUNT 0xFFC01DF0 /* DMA1 Channel 7 Current Inner Loop Count */
#define DMA1_7_CURR_Y_COUNT 0xFFC01DF8 /* DMA1 Channel 7 Current Outer Loop Count */
#define DMA1_7_IRQ_STATUS 0xFFC01DE8 /* DMA1 Channel 7 Interrupt/Status Register */
#define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC /* DMA1 Channel 7 Peripheral Map Register */
 
#define DMA1_8_CONFIG 0xFFC01E08 /* DMA1 Channel 8 Configuration register */
#define DMA1_8_NEXT_DESC_PTR 0xFFC01E00 /* DMA1 Channel 8 Next Descripter Ptr Reg */
#define DMA1_8_START_ADDR 0xFFC01E04 /* DMA1 Channel 8 Start Address */
#define DMA1_8_X_COUNT 0xFFC01E10 /* DMA1 Channel 8 Inner Loop Count */
#define DMA1_8_Y_COUNT 0xFFC01E18 /* DMA1 Channel 8 Outer Loop Count */
#define DMA1_8_X_MODIFY 0xFFC01E14 /* DMA1 Channel 8 Inner Loop Addr Increment */
#define DMA1_8_Y_MODIFY 0xFFC01E1C /* DMA1 Channel 8 Outer Loop Addr Increment */
#define DMA1_8_CURR_DESC_PTR 0xFFC01E20 /* DMA1 Channel 8 Current Descriptor Pointer */
#define DMA1_8_CURR_ADDR 0xFFC01E24 /* DMA1 Channel 8 Current Address Pointer */
#define DMA1_8_CURR_X_COUNT 0xFFC01E30 /* DMA1 Channel 8 Current Inner Loop Count */
#define DMA1_8_CURR_Y_COUNT 0xFFC01E38 /* DMA1 Channel 8 Current Outer Loop Count */
#define DMA1_8_IRQ_STATUS 0xFFC01E28 /* DMA1 Channel 8 Interrupt/Status Register */
#define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C /* DMA1 Channel 8 Peripheral Map Register */
 
#define DMA1_9_CONFIG 0xFFC01E48 /* DMA1 Channel 9 Configuration register */
#define DMA1_9_NEXT_DESC_PTR 0xFFC01E40 /* DMA1 Channel 9 Next Descripter Ptr Reg */
#define DMA1_9_START_ADDR 0xFFC01E44 /* DMA1 Channel 9 Start Address */
#define DMA1_9_X_COUNT 0xFFC01E50 /* DMA1 Channel 9 Inner Loop Count */
#define DMA1_9_Y_COUNT 0xFFC01E58 /* DMA1 Channel 9 Outer Loop Count */
#define DMA1_9_X_MODIFY 0xFFC01E54 /* DMA1 Channel 9 Inner Loop Addr Increment */
#define DMA1_9_Y_MODIFY 0xFFC01E5C /* DMA1 Channel 9 Outer Loop Addr Increment */
#define DMA1_9_CURR_DESC_PTR 0xFFC01E60 /* DMA1 Channel 9 Current Descriptor Pointer */
#define DMA1_9_CURR_ADDR 0xFFC01E64 /* DMA1 Channel 9 Current Address Pointer */
#define DMA1_9_CURR_X_COUNT 0xFFC01E70 /* DMA1 Channel 9 Current Inner Loop Count */
#define DMA1_9_CURR_Y_COUNT 0xFFC01E78 /* DMA1 Channel 9 Current Outer Loop Count */
#define DMA1_9_IRQ_STATUS 0xFFC01E68 /* DMA1 Channel 9 Interrupt/Status Register */
#define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C /* DMA1 Channel 9 Peripheral Map Register */
 
#define DMA1_10_CONFIG 0xFFC01E88 /* DMA1 Channel 10 Configuration register */
#define DMA1_10_NEXT_DESC_PTR 0xFFC01E80 /* DMA1 Channel 10 Next Descripter Ptr Reg */
#define DMA1_10_START_ADDR 0xFFC01E84 /* DMA1 Channel 10 Start Address */
#define DMA1_10_X_COUNT 0xFFC01E90 /* DMA1 Channel 10 Inner Loop Count */
#define DMA1_10_Y_COUNT 0xFFC01E98 /* DMA1 Channel 10 Outer Loop Count */
#define DMA1_10_X_MODIFY 0xFFC01E94 /* DMA1 Channel 10 Inner Loop Addr Increment */
#define DMA1_10_Y_MODIFY 0xFFC01E9C /* DMA1 Channel 10 Outer Loop Addr Increment */
#define DMA1_10_CURR_DESC_PTR 0xFFC01EA0 /* DMA1 Channel 10 Current Descriptor Pointer */
#define DMA1_10_CURR_ADDR 0xFFC01EA4 /* DMA1 Channel 10 Current Address Pointer */
#define DMA1_10_CURR_X_COUNT 0xFFC01EB0 /* DMA1 Channel 10 Current Inner Loop Count */
#define DMA1_10_CURR_Y_COUNT 0xFFC01EB8 /* DMA1 Channel 10 Current Outer Loop Count */
#define DMA1_10_IRQ_STATUS 0xFFC01EA8 /* DMA1 Channel 10 Interrupt/Status Register */
#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC /* DMA1 Channel 10 Peripheral Map Register */
 
#define DMA1_11_CONFIG 0xFFC01EC8 /* DMA1 Channel 11 Configuration register */
#define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0 /* DMA1 Channel 11 Next Descripter Ptr Reg */
#define DMA1_11_START_ADDR 0xFFC01EC4 /* DMA1 Channel 11 Start Address */
#define DMA1_11_X_COUNT 0xFFC01ED0 /* DMA1 Channel 11 Inner Loop Count */
#define DMA1_11_Y_COUNT 0xFFC01ED8 /* DMA1 Channel 11 Outer Loop Count */
#define DMA1_11_X_MODIFY 0xFFC01ED4 /* DMA1 Channel 11 Inner Loop Addr Increment */
#define DMA1_11_Y_MODIFY 0xFFC01EDC /* DMA1 Channel 11 Outer Loop Addr Increment */
#define DMA1_11_CURR_DESC_PTR 0xFFC01EE0 /* DMA1 Channel 11 Current Descriptor Pointer */
#define DMA1_11_CURR_ADDR 0xFFC01EE4 /* DMA1 Channel 11 Current Address Pointer */
#define DMA1_11_CURR_X_COUNT 0xFFC01EF0 /* DMA1 Channel 11 Current Inner Loop Count */
#define DMA1_11_CURR_Y_COUNT 0xFFC01EF8 /* DMA1 Channel 11 Current Outer Loop Count */
#define DMA1_11_IRQ_STATUS 0xFFC01EE8 /* DMA1 Channel 11 Interrupt/Status Register */
#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */
 
/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
#define MDMA1_D0_CONFIG 0xFFC01F08 /*MemDMA1 Stream 0 Destination Configuration */
#define MDMA1_D0_NEXT_DESC_PTR 0xFFC01F00 /*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */
#define MDMA1_D0_START_ADDR 0xFFC01F04 /*MemDMA1 Stream 0 Destination Start Address */
#define MDMA1_D0_X_COUNT 0xFFC01F10 /*MemDMA1 Stream 0 Destination Inner-Loop Count */
#define MDMA1_D0_Y_COUNT 0xFFC01F18 /*MemDMA1 Stream 0 Destination Outer-Loop Count */
#define MDMA1_D0_X_MODIFY 0xFFC01F14 /*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */
#define MDMA1_D0_Y_MODIFY 0xFFC01F1C /*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */
#define MDMA1_D0_CURR_DESC_PTR 0xFFC01F20 /*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */
#define MDMA1_D0_CURR_ADDR 0xFFC01F24 /*MemDMA1 Stream 0 Destination Current Address */
#define MDMA1_D0_CURR_X_COUNT 0xFFC01F30 /*MemDMA1 Stream 0 Dest Current Inner-Loop Count */
#define MDMA1_D0_CURR_Y_COUNT 0xFFC01F38 /*MemDMA1 Stream 0 Dest Current Outer-Loop Count */
#define MDMA1_D0_IRQ_STATUS 0xFFC01F28 /*MemDMA1 Stream 0 Destination Interrupt/Status */
#define MDMA1_D0_PERIPHERAL_MAP 0xFFC01F2C /*MemDMA1 Stream 0 Destination Peripheral Map */
 
#define MDMA1_S0_CONFIG 0xFFC01F48 /*MemDMA1 Stream 0 Source Configuration */
#define MDMA1_S0_NEXT_DESC_PTR 0xFFC01F40 /*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */
#define MDMA1_S0_START_ADDR 0xFFC01F44 /*MemDMA1 Stream 0 Source Start Address */
#define MDMA1_S0_X_COUNT 0xFFC01F50 /*MemDMA1 Stream 0 Source Inner-Loop Count */
#define MDMA1_S0_Y_COUNT 0xFFC01F58 /*MemDMA1 Stream 0 Source Outer-Loop Count */
#define MDMA1_S0_X_MODIFY 0xFFC01F54 /*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */
#define MDMA1_S0_Y_MODIFY 0xFFC01F5C /*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */
#define MDMA1_S0_CURR_DESC_PTR 0xFFC01F60 /*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */
#define MDMA1_S0_CURR_ADDR 0xFFC01F64 /*MemDMA1 Stream 0 Source Current Address */
#define MDMA1_S0_CURR_X_COUNT 0xFFC01F70 /*MemDMA1 Stream 0 Source Current Inner-Loop Count */
#define MDMA1_S0_CURR_Y_COUNT 0xFFC01F78 /*MemDMA1 Stream 0 Source Current Outer-Loop Count */
#define MDMA1_S0_IRQ_STATUS 0xFFC01F68 /*MemDMA1 Stream 0 Source Interrupt/Status */
#define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C /*MemDMA1 Stream 0 Source Peripheral Map */
 
#define MDMA1_D1_CONFIG 0xFFC01F88 /*MemDMA1 Stream 1 Destination Configuration */
#define MDMA1_D1_NEXT_DESC_PTR 0xFFC01F80 /*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */
#define MDMA1_D1_START_ADDR 0xFFC01F84 /*MemDMA1 Stream 1 Destination Start Address */
#define MDMA1_D1_X_COUNT 0xFFC01F90 /*MemDMA1 Stream 1 Destination Inner-Loop Count */
#define MDMA1_D1_Y_COUNT 0xFFC01F98 /*MemDMA1 Stream 1 Destination Outer-Loop Count */
#define MDMA1_D1_X_MODIFY 0xFFC01F94 /*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */
#define MDMA1_D1_Y_MODIFY 0xFFC01F9C /*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */
#define MDMA1_D1_CURR_DESC_PTR 0xFFC01FA0 /*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */
#define MDMA1_D1_CURR_ADDR 0xFFC01FA4 /*MemDMA1 Stream 1 Dest Current Address */
#define MDMA1_D1_CURR_X_COUNT 0xFFC01FB0 /*MemDMA1 Stream 1 Dest Current Inner-Loop Count */
#define MDMA1_D1_CURR_Y_COUNT 0xFFC01FB8 /*MemDMA1 Stream 1 Dest Current Outer-Loop Count */
#define MDMA1_D1_IRQ_STATUS 0xFFC01FA8 /*MemDMA1 Stream 1 Dest Interrupt/Status */
#define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC /*MemDMA1 Stream 1 Dest Peripheral Map */
 
#define MDMA1_S1_CONFIG 0xFFC01FC8 /*MemDMA1 Stream 1 Source Configuration */
#define MDMA1_S1_NEXT_DESC_PTR 0xFFC01FC0 /*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */
#define MDMA1_S1_START_ADDR 0xFFC01FC4 /*MemDMA1 Stream 1 Source Start Address */
#define MDMA1_S1_X_COUNT 0xFFC01FD0 /*MemDMA1 Stream 1 Source Inner-Loop Count */
#define MDMA1_S1_Y_COUNT 0xFFC01FD8 /*MemDMA1 Stream 1 Source Outer-Loop Count */
#define MDMA1_S1_X_MODIFY 0xFFC01FD4 /*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */
#define MDMA1_S1_Y_MODIFY 0xFFC01FDC /*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */
#define MDMA1_S1_CURR_DESC_PTR 0xFFC01FE0 /*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */
#define MDMA1_S1_CURR_ADDR 0xFFC01FE4 /*MemDMA1 Stream 1 Source Current Address */
#define MDMA1_S1_CURR_X_COUNT 0xFFC01FF0 /*MemDMA1 Stream 1 Source Current Inner-Loop Count */
#define MDMA1_S1_CURR_Y_COUNT 0xFFC01FF8 /*MemDMA1 Stream 1 Source Current Outer-Loop Count */
#define MDMA1_S1_IRQ_STATUS 0xFFC01FE8 /*MemDMA1 Stream 1 Source Interrupt/Status */
#define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC /*MemDMA1 Stream 1 Source Peripheral Map */
 
 
/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
#define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */
#define DMA2_0_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */
#define DMA2_0_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */
#define DMA2_0_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */
#define DMA2_0_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */
#define DMA2_0_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */
#define DMA2_0_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */
#define DMA2_0_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */
#define DMA2_0_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */
#define DMA2_0_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */
#define DMA2_0_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */
#define DMA2_0_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt/Status Register */
#define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */
 
#define DMA2_1_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */
#define DMA2_1_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */
#define DMA2_1_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */
#define DMA2_1_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */
#define DMA2_1_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */
#define DMA2_1_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */
#define DMA2_1_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */
#define DMA2_1_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */
#define DMA2_1_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */
#define DMA2_1_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */
#define DMA2_1_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */
#define DMA2_1_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt/Status Register */
#define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */
 
#define DMA2_2_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */
#define DMA2_2_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */
#define DMA2_2_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */
#define DMA2_2_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */
#define DMA2_2_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */
#define DMA2_2_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */
#define DMA2_2_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */
#define DMA2_2_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */
#define DMA2_2_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */
#define DMA2_2_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */
#define DMA2_2_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */
#define DMA2_2_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt/Status Register */
#define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */
 
#define DMA2_3_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */
#define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */
#define DMA2_3_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */
#define DMA2_3_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */
#define DMA2_3_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */
#define DMA2_3_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */
#define DMA2_3_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */
#define DMA2_3_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */
#define DMA2_3_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */
#define DMA2_3_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */
#define DMA2_3_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */
#define DMA2_3_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt/Status Register */
#define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */
 
#define DMA2_4_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */
#define DMA2_4_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */
#define DMA2_4_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */
#define DMA2_4_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */
#define DMA2_4_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */
#define DMA2_4_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */
#define DMA2_4_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */
#define DMA2_4_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */
#define DMA2_4_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */
#define DMA2_4_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */
#define DMA2_4_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */
#define DMA2_4_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt/Status Register */
#define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */
 
#define DMA2_5_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */
#define DMA2_5_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */
#define DMA2_5_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */
#define DMA2_5_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */
#define DMA2_5_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */
#define DMA2_5_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */
#define DMA2_5_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */
#define DMA2_5_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */
#define DMA2_5_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */
#define DMA2_5_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */
#define DMA2_5_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */
#define DMA2_5_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt/Status Register */
#define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */
 
#define DMA2_6_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */
#define DMA2_6_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */
#define DMA2_6_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */
#define DMA2_6_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */
#define DMA2_6_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */
#define DMA2_6_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */
#define DMA2_6_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */
#define DMA2_6_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */
#define DMA2_6_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */
#define DMA2_6_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */
#define DMA2_6_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */
#define DMA2_6_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt/Status Register */
#define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */
 
#define DMA2_7_CONFIG 0xFFC00DC8 /* DMA2 Channel 7 Configuration register */
#define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA2 Channel 7 Next Descripter Ptr Reg */
#define DMA2_7_START_ADDR 0xFFC00DC4 /* DMA2 Channel 7 Start Address */
#define DMA2_7_X_COUNT 0xFFC00DD0 /* DMA2 Channel 7 Inner Loop Count */
#define DMA2_7_Y_COUNT 0xFFC00DD8 /* DMA2 Channel 7 Outer Loop Count */
#define DMA2_7_X_MODIFY 0xFFC00DD4 /* DMA2 Channel 7 Inner Loop Addr Increment */
#define DMA2_7_Y_MODIFY 0xFFC00DDC /* DMA2 Channel 7 Outer Loop Addr Increment */
#define DMA2_7_CURR_DESC_PTR 0xFFC00DE0 /* DMA2 Channel 7 Current Descriptor Pointer */
#define DMA2_7_CURR_ADDR 0xFFC00DE4 /* DMA2 Channel 7 Current Address Pointer */
#define DMA2_7_CURR_X_COUNT 0xFFC00DF0 /* DMA2 Channel 7 Current Inner Loop Count */
#define DMA2_7_CURR_Y_COUNT 0xFFC00DF8 /* DMA2 Channel 7 Current Outer Loop Count */
#define DMA2_7_IRQ_STATUS 0xFFC00DE8 /* DMA2 Channel 7 Interrupt/Status Register */
#define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC /* DMA2 Channel 7 Peripheral Map Register */
 
#define DMA2_8_CONFIG 0xFFC00E08 /* DMA2 Channel 8 Configuration register */
#define DMA2_8_NEXT_DESC_PTR 0xFFC00E00 /* DMA2 Channel 8 Next Descripter Ptr Reg */
#define DMA2_8_START_ADDR 0xFFC00E04 /* DMA2 Channel 8 Start Address */
#define DMA2_8_X_COUNT 0xFFC00E10 /* DMA2 Channel 8 Inner Loop Count */
#define DMA2_8_Y_COUNT 0xFFC00E18 /* DMA2 Channel 8 Outer Loop Count */
#define DMA2_8_X_MODIFY 0xFFC00E14 /* DMA2 Channel 8 Inner Loop Addr Increment */
#define DMA2_8_Y_MODIFY 0xFFC00E1C /* DMA2 Channel 8 Outer Loop Addr Increment */
#define DMA2_8_CURR_DESC_PTR 0xFFC00E20 /* DMA2 Channel 8 Current Descriptor Pointer */
#define DMA2_8_CURR_ADDR 0xFFC00E24 /* DMA2 Channel 8 Current Address Pointer */
#define DMA2_8_CURR_X_COUNT 0xFFC00E30 /* DMA2 Channel 8 Current Inner Loop Count */
#define DMA2_8_CURR_Y_COUNT 0xFFC00E38 /* DMA2 Channel 8 Current Outer Loop Count */
#define DMA2_8_IRQ_STATUS 0xFFC00E28 /* DMA2 Channel 8 Interrupt/Status Register */
#define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C /* DMA2 Channel 8 Peripheral Map Register */
 
#define DMA2_9_CONFIG 0xFFC00E48 /* DMA2 Channel 9 Configuration register */
#define DMA2_9_NEXT_DESC_PTR 0xFFC00E40 /* DMA2 Channel 9 Next Descripter Ptr Reg */
#define DMA2_9_START_ADDR 0xFFC00E44 /* DMA2 Channel 9 Start Address */
#define DMA2_9_X_COUNT 0xFFC00E50 /* DMA2 Channel 9 Inner Loop Count */
#define DMA2_9_Y_COUNT 0xFFC00E58 /* DMA2 Channel 9 Outer Loop Count */
#define DMA2_9_X_MODIFY 0xFFC00E54 /* DMA2 Channel 9 Inner Loop Addr Increment */
#define DMA2_9_Y_MODIFY 0xFFC00E5C /* DMA2 Channel 9 Outer Loop Addr Increment */
#define DMA2_9_CURR_DESC_PTR 0xFFC00E60 /* DMA2 Channel 9 Current Descriptor Pointer */
#define DMA2_9_CURR_ADDR 0xFFC00E64 /* DMA2 Channel 9 Current Address Pointer */
#define DMA2_9_CURR_X_COUNT 0xFFC00E70 /* DMA2 Channel 9 Current Inner Loop Count */
#define DMA2_9_CURR_Y_COUNT 0xFFC00E78 /* DMA2 Channel 9 Current Outer Loop Count */
#define DMA2_9_IRQ_STATUS 0xFFC00E68 /* DMA2 Channel 9 Interrupt/Status Register */
#define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C /* DMA2 Channel 9 Peripheral Map Register */
 
#define DMA2_10_CONFIG 0xFFC00E88 /* DMA2 Channel 10 Configuration register */
#define DMA2_10_NEXT_DESC_PTR 0xFFC00E80 /* DMA2 Channel 10 Next Descripter Ptr Reg */
#define DMA2_10_START_ADDR 0xFFC00E84 /* DMA2 Channel 10 Start Address */
#define DMA2_10_X_COUNT 0xFFC00E90 /* DMA2 Channel 10 Inner Loop Count */
#define DMA2_10_Y_COUNT 0xFFC00E98 /* DMA2 Channel 10 Outer Loop Count */
#define DMA2_10_X_MODIFY 0xFFC00E94 /* DMA2 Channel 10 Inner Loop Addr Increment */
#define DMA2_10_Y_MODIFY 0xFFC00E9C /* DMA2 Channel 10 Outer Loop Addr Increment */
#define DMA2_10_CURR_DESC_PTR 0xFFC00EA0 /* DMA2 Channel 10 Current Descriptor Pointer */
#define DMA2_10_CURR_ADDR 0xFFC00EA4 /* DMA2 Channel 10 Current Address Pointer */
#define DMA2_10_CURR_X_COUNT 0xFFC00EB0 /* DMA2 Channel 10 Current Inner Loop Count */
#define DMA2_10_CURR_Y_COUNT 0xFFC00EB8 /* DMA2 Channel 10 Current Outer Loop Count */
#define DMA2_10_IRQ_STATUS 0xFFC00EA8 /* DMA2 Channel 10 Interrupt/Status Register */
#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC /* DMA2 Channel 10 Peripheral Map Register */
 
#define DMA2_11_CONFIG 0xFFC00EC8 /* DMA2 Channel 11 Configuration register */
#define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA2 Channel 11 Next Descripter Ptr Reg */
#define DMA2_11_START_ADDR 0xFFC00EC4 /* DMA2 Channel 11 Start Address */
#define DMA2_11_X_COUNT 0xFFC00ED0 /* DMA2 Channel 11 Inner Loop Count */
#define DMA2_11_Y_COUNT 0xFFC00ED8 /* DMA2 Channel 11 Outer Loop Count */
#define DMA2_11_X_MODIFY 0xFFC00ED4 /* DMA2 Channel 11 Inner Loop Addr Increment */
#define DMA2_11_Y_MODIFY 0xFFC00EDC /* DMA2 Channel 11 Outer Loop Addr Increment */
#define DMA2_11_CURR_DESC_PTR 0xFFC00EE0 /* DMA2 Channel 11 Current Descriptor Pointer */
#define DMA2_11_CURR_ADDR 0xFFC00EE4 /* DMA2 Channel 11 Current Address Pointer */
#define DMA2_11_CURR_X_COUNT 0xFFC00EF0 /* DMA2 Channel 11 Current Inner Loop Count */
#define DMA2_11_CURR_Y_COUNT 0xFFC00EF8 /* DMA2 Channel 11 Current Outer Loop Count */
#define DMA2_11_IRQ_STATUS 0xFFC00EE8 /* DMA2 Channel 11 Interrupt/Status Register */
#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */
 
 
/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
#define MDMA2_D0_CONFIG 0xFFC00F08 /*MemDMA2 Stream 0 Destination Configuration register */
#define MDMA2_D0_NEXT_DESC_PTR 0xFFC00F00 /*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */
#define MDMA2_D0_START_ADDR 0xFFC00F04 /*MemDMA2 Stream 0 Destination Start Address */
#define MDMA2_D0_X_COUNT 0xFFC00F10 /*MemDMA2 Stream 0 Dest Inner-Loop Count register */
#define MDMA2_D0_Y_COUNT 0xFFC00F18 /*MemDMA2 Stream 0 Dest Outer-Loop Count register */
#define MDMA2_D0_X_MODIFY 0xFFC00F14 /*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */
#define MDMA2_D0_Y_MODIFY 0xFFC00F1C /*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */
#define MDMA2_D0_CURR_DESC_PTR 0xFFC00F20 /*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */
#define MDMA2_D0_CURR_ADDR 0xFFC00F24 /*MemDMA2 Stream 0 Destination Current Address */
#define MDMA2_D0_CURR_X_COUNT 0xFFC00F30 /*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */
#define MDMA2_D0_CURR_Y_COUNT 0xFFC00F38 /*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */
#define MDMA2_D0_IRQ_STATUS 0xFFC00F28 /*MemDMA2 Stream 0 Dest Interrupt/Status Register */
#define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C /*MemDMA2 Stream 0 Destination Peripheral Map register */
 
#define MDMA2_S0_CONFIG 0xFFC00F48 /*MemDMA2 Stream 0 Source Configuration register */
#define MDMA2_S0_NEXT_DESC_PTR 0xFFC00F40 /*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */
#define MDMA2_S0_START_ADDR 0xFFC00F44 /*MemDMA2 Stream 0 Source Start Address */
#define MDMA2_S0_X_COUNT 0xFFC00F50 /*MemDMA2 Stream 0 Source Inner-Loop Count register */
#define MDMA2_S0_Y_COUNT 0xFFC00F58 /*MemDMA2 Stream 0 Source Outer-Loop Count register */
#define MDMA2_S0_X_MODIFY 0xFFC00F54 /*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */
#define MDMA2_S0_Y_MODIFY 0xFFC00F5C /*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */
#define MDMA2_S0_CURR_DESC_PTR 0xFFC00F60 /*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */
#define MDMA2_S0_CURR_ADDR 0xFFC00F64 /*MemDMA2 Stream 0 Source Current Address */
#define MDMA2_S0_CURR_X_COUNT 0xFFC00F70 /*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */
#define MDMA2_S0_CURR_Y_COUNT 0xFFC00F78 /*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */
#define MDMA2_S0_IRQ_STATUS 0xFFC00F68 /*MemDMA2 Stream 0 Source Interrupt/Status Register */
#define MDMA2_S0_PERIPHERAL_MAP 0xFFC00F6C /*MemDMA2 Stream 0 Source Peripheral Map register */
 
#define MDMA2_D1_CONFIG 0xFFC00F88 /*MemDMA2 Stream 1 Destination Configuration register */
#define MDMA2_D1_NEXT_DESC_PTR 0xFFC00F80 /*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */
#define MDMA2_D1_START_ADDR 0xFFC00F84 /*MemDMA2 Stream 1 Destination Start Address */
#define MDMA2_D1_X_COUNT 0xFFC00F90 /*MemDMA2 Stream 1 Dest Inner-Loop Count register */
#define MDMA2_D1_Y_COUNT 0xFFC00F98 /*MemDMA2 Stream 1 Dest Outer-Loop Count register */
#define MDMA2_D1_X_MODIFY 0xFFC00F94 /*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */
#define MDMA2_D1_Y_MODIFY 0xFFC00F9C /*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */
#define MDMA2_D1_CURR_DESC_PTR 0xFFC00FA0 /*MemDMA2 Stream 1 Destination Current Descriptor Ptr */
#define MDMA2_D1_CURR_ADDR 0xFFC00FA4 /*MemDMA2 Stream 1 Destination Current Address reg */
#define MDMA2_D1_CURR_X_COUNT 0xFFC00FB0 /*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */
#define MDMA2_D1_CURR_Y_COUNT 0xFFC00FB8 /*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */
#define MDMA2_D1_IRQ_STATUS 0xFFC00FA8 /*MemDMA2 Stream 1 Destination Interrupt/Status Reg */
#define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC /*MemDMA2 Stream 1 Destination Peripheral Map register */
 
#define MDMA2_S1_CONFIG 0xFFC00FC8 /*MemDMA2 Stream 1 Source Configuration register */
#define MDMA2_S1_NEXT_DESC_PTR 0xFFC00FC0 /*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */
#define MDMA2_S1_START_ADDR 0xFFC00FC4 /*MemDMA2 Stream 1 Source Start Address */
#define MDMA2_S1_X_COUNT 0xFFC00FD0 /*MemDMA2 Stream 1 Source Inner-Loop Count register */
#define MDMA2_S1_Y_COUNT 0xFFC00FD8 /*MemDMA2 Stream 1 Source Outer-Loop Count register */
#define MDMA2_S1_X_MODIFY 0xFFC00FD4 /*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */
#define MDMA2_S1_Y_MODIFY 0xFFC00FDC /*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */
#define MDMA2_S1_CURR_DESC_PTR 0xFFC00FE0 /*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */
#define MDMA2_S1_CURR_ADDR 0xFFC00FE4 /*MemDMA2 Stream 1 Source Current Address */
#define MDMA2_S1_CURR_X_COUNT 0xFFC00FF0 /*MemDMA2 Stream 1 Source Current Inner-Loop Count */
#define MDMA2_S1_CURR_Y_COUNT 0xFFC00FF8 /*MemDMA2 Stream 1 Source Current Outer-Loop Count */
#define MDMA2_S1_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */
#define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */
 
 
 
/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
#define IMDMA_D0_CONFIG 0xFFC01808 /*IMDMA Stream 0 Destination Configuration */
#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 /*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */
#define IMDMA_D0_START_ADDR 0xFFC01804 /*IMDMA Stream 0 Destination Start Address */
#define IMDMA_D0_X_COUNT 0xFFC01810 /*IMDMA Stream 0 Destination Inner-Loop Count */
#define IMDMA_D0_Y_COUNT 0xFFC01818 /*IMDMA Stream 0 Destination Outer-Loop Count */
#define IMDMA_D0_X_MODIFY 0xFFC01814 /*IMDMA Stream 0 Dest Inner-Loop Address-Increment */
#define IMDMA_D0_Y_MODIFY 0xFFC0181C /*IMDMA Stream 0 Dest Outer-Loop Address-Increment */
#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 /*IMDMA Stream 0 Destination Current Descriptor Ptr */
#define IMDMA_D0_CURR_ADDR 0xFFC01824 /*IMDMA Stream 0 Destination Current Address */
#define IMDMA_D0_CURR_X_COUNT 0xFFC01830 /*IMDMA Stream 0 Destination Current Inner-Loop Count */
#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 /*IMDMA Stream 0 Destination Current Outer-Loop Count */
#define IMDMA_D0_IRQ_STATUS 0xFFC01828 /*IMDMA Stream 0 Destination Interrupt/Status */
 
#define IMDMA_S0_CONFIG 0xFFC01848 /*IMDMA Stream 0 Source Configuration */
#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 /*IMDMA Stream 0 Source Next Descriptor Ptr Reg */
#define IMDMA_S0_START_ADDR 0xFFC01844 /*IMDMA Stream 0 Source Start Address */
#define IMDMA_S0_X_COUNT 0xFFC01850 /*IMDMA Stream 0 Source Inner-Loop Count */
#define IMDMA_S0_Y_COUNT 0xFFC01858 /*IMDMA Stream 0 Source Outer-Loop Count */
#define IMDMA_S0_X_MODIFY 0xFFC01854 /*IMDMA Stream 0 Source Inner-Loop Address-Increment */
#define IMDMA_S0_Y_MODIFY 0xFFC0185C /*IMDMA Stream 0 Source Outer-Loop Address-Increment */
#define IMDMA_S0_CURR_DESC_PTR 0xFFC01860 /*IMDMA Stream 0 Source Current Descriptor Ptr reg */
#define IMDMA_S0_CURR_ADDR 0xFFC01864 /*IMDMA Stream 0 Source Current Address */
#define IMDMA_S0_CURR_X_COUNT 0xFFC01870 /*IMDMA Stream 0 Source Current Inner-Loop Count */
#define IMDMA_S0_CURR_Y_COUNT 0xFFC01878 /*IMDMA Stream 0 Source Current Outer-Loop Count */
#define IMDMA_S0_IRQ_STATUS 0xFFC01868 /*IMDMA Stream 0 Source Interrupt/Status */
 
#define IMDMA_D1_CONFIG 0xFFC01888 /*IMDMA Stream 1 Destination Configuration */
#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 /*IMDMA Stream 1 Destination Next Descriptor Ptr Reg */
#define IMDMA_D1_START_ADDR 0xFFC01884 /*IMDMA Stream 1 Destination Start Address */
#define IMDMA_D1_X_COUNT 0xFFC01890 /*IMDMA Stream 1 Destination Inner-Loop Count */
#define IMDMA_D1_Y_COUNT 0xFFC01898 /*IMDMA Stream 1 Destination Outer-Loop Count */
#define IMDMA_D1_X_MODIFY 0xFFC01894 /*IMDMA Stream 1 Dest Inner-Loop Address-Increment */
#define IMDMA_D1_Y_MODIFY 0xFFC0189C /*IMDMA Stream 1 Dest Outer-Loop Address-Increment */
#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 /*IMDMA Stream 1 Destination Current Descriptor Ptr */
#define IMDMA_D1_CURR_ADDR 0xFFC018A4 /*IMDMA Stream 1 Destination Current Address */
#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 /*IMDMA Stream 1 Destination Current Inner-Loop Count */
#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 /*IMDMA Stream 1 Destination Current Outer-Loop Count */
#define IMDMA_D1_IRQ_STATUS 0xFFC018A8 /*IMDMA Stream 1 Destination Interrupt/Status */
 
#define IMDMA_S1_CONFIG 0xFFC018C8 /*IMDMA Stream 1 Source Configuration */
#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 /*IMDMA Stream 1 Source Next Descriptor Ptr Reg */
#define IMDMA_S1_START_ADDR 0xFFC018C4 /*IMDMA Stream 1 Source Start Address */
#define IMDMA_S1_X_COUNT 0xFFC018D0 /*IMDMA Stream 1 Source Inner-Loop Count */
#define IMDMA_S1_Y_COUNT 0xFFC018D8 /*IMDMA Stream 1 Source Outer-Loop Count */
#define IMDMA_S1_X_MODIFY 0xFFC018D4 /*IMDMA Stream 1 Source Inner-Loop Address-Increment */
#define IMDMA_S1_Y_MODIFY 0xFFC018DC /*IMDMA Stream 1 Source Outer-Loop Address-Increment */
#define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0 /*IMDMA Stream 1 Source Current Descriptor Ptr reg */
#define IMDMA_S1_CURR_ADDR 0xFFC018E4 /*IMDMA Stream 1 Source Current Address */
#define IMDMA_S1_CURR_X_COUNT 0xFFC018F0 /*IMDMA Stream 1 Source Current Inner-Loop Count */
#define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8 /*IMDMA Stream 1 Source Current Outer-Loop Count */
#define IMDMA_S1_IRQ_STATUS 0xFFC018E8 /*IMDMA Stream 1 Source Interrupt/Status */
 
 
 
/*********************************************************************************** */
/* System MMR Register Bits */
/******************************************************************************* */
 
/* ********************* PLL AND RESET MASKS ************************ */
 
/* PLL_CTL Masks */
#define PLL_CLKIN              	0x0000  /* Pass CLKIN to PLL */
#define PLL_CLKIN_DIV2         	0x0001  /* Pass CLKIN/2 to PLL */
#define PLL_OFF                	0x0002  /* Shut off PLL clocks */
#define STOPCK_OFF             	0x0008  /* Core clock off */
#define ALT_TIMING		0x0010  /* Enable Alternate PPI Timing */
#define PDWN                   	0x0020  /* Put the PLL in a Deep Sleep state */
#define BYPASS                 	0x0100  /* Bypass the PLL */
#define DF                      0x0001  /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
#define MSEL                    0x7E00  /* Multiplier Select For CCLK/VCO Factors */
#define IN_DELAY                0x0040  /* Add 200ps Delay on EBIU Inputs */
#define OUT_DELAY               0x0080  /* Add 200ps Delay on EBIU Outputs */
#define SPORT_HYS               0x8000  /* Add 250mV Hysteresis to SPORT Inputs */
 
/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
#ifdef _MISRA_RULES
#define SET_MSEL(x)    (((x)&0x3Fu) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
#else
#define SET_MSEL(x)    (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
#endif /* _MISRA_RULES */
 
/* PLL_DIV Masks */
#define SSEL         0x000F      /* System Select */
#define CSEL         0x0030      /* Core Select */
#define SCLK_DIV(x)  (x)		   /* SCLK = VCO / x */
 
/* PLL_DIV Macros */
#ifdef _MISRA_RULES
#define SET_SSEL(x)  ((x)&0xFu)    /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
#else
#define SET_SSEL(x)  ((x)&0xF)    /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
#endif /* _MISRA_RULES */
 
/* PLL_STAT Macros */
#define VSTAT       0x0080   /* Voltage Regulator Status: Regulator at programmed voltage */
#define CORE_IDLE   0x0040   /* processor is in the IDLE operating mode */
#define PLL_LOCKED  0x0020   /* PLL_LOCKCNT Has Been Reached */
#define SLEEP       0x0010   /* processor is in the Sleep operating mode */
#define DEEP_SLEEP  0x0008   /* processor is in the Deep Sleep operating mode */
#define ACTIVE_PLLDISABLED   0x0004   /* Processor In Active Mode With PLL Disabled */
#define FULL_ON               0x0002  /* Processor In Full On Mode */
#define ACTIVE_PLLENABLED     0x0001              /* Processor In Active Mode With PLL Enabled */
 
 
#define CCLK_DIV1              0x00000000  /* CCLK = VCO / 1 */
#define CCLK_DIV2              0x00000010  /* CCLK = VCO / 2 */
#define CCLK_DIV4              0x00000020  /* CCLK = VCO / 4 */
#define CCLK_DIV8              0x00000030  /* CCLK = VCO / 8 */
 
/* SWRST Mask */
#define SYSTEM_RESET           0x0007  /* Initiates a system software reset */
#define SWRST_DBL_FAULT_A      0x0800  /* SWRST Core A Double Fault */
#define SWRST_DBL_FAULT_B      0x1000  /* SWRST Core B Double Fault */
#define SWRST_WDT_B		       0x2000  /* SWRST Watchdog B */
#define SWRST_WDT_A		       0x4000  /* SWRST Watchdog A */
#define SWRST_OCCURRED         0x8000  /* SWRST Status */
 
/* VR_CTL Masks																	*/
#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
#define	HIBERNATE		0x0000	/* 	Powerdown/Bypass On-Board Regulation	*/
#define	FREQ_333		0x0001	/* 	Switching Frequency Is 333 kHz			*/
#define	FREQ_667		0x0002	/* 	Switching Frequency Is 667 kHz			*/
#define	FREQ_1000		0x0003	/* 	Switching Frequency Is 1 MHz			*/
#define  WAKE        0x0100  /* Enable RTC/Reset Wakeup From Hibernate */
#define  SCKELOW     0x8000  /* Enable Drive CKE Low During Reset */
 
 
#define GAIN			0x000C	/* Voltage Level Gain	*/
#define	GAIN_5			0x0000	/* 	GAIN = 5		*/
#define	GAIN_10			0x0004	/* 	GAIN = 10		*/
#define	GAIN_20			0x0008	/* 	GAIN = 20		*/
#define	GAIN_50			0x000C	/* 	GAIN = 50		*/
 
#define	VLEV			0x00F0	/* Internal Voltage Level - Only Program Values Within Specifications	*/
#define	VLEV_085 		0x0060	/* 	VLEV = 0.85 V (See Datasheet for Regulator Tolerance)	*/
#define	VLEV_090		0x0070	/* 	VLEV = 0.90 V (See Datasheet for Regulator Tolerance)	*/
#define	VLEV_095		0x0080	/* 	VLEV = 0.95 V (See Datasheet for Regulator Tolerance)	*/
#define	VLEV_100		0x0090	/* 	VLEV = 1.00 V (See Datasheet for Regulator Tolerance)	*/
#define	VLEV_105		0x00A0	/* 	VLEV = 1.05 V (See Datasheet for Regulator Tolerance)	*/
#define	VLEV_110		0x00B0	/* 	VLEV = 1.10 V (See Datasheet for Regulator Tolerance)	*/
#define	VLEV_115		0x00C0	/* 	VLEV = 1.15 V (See Datasheet for Regulator Tolerance)	*/
#define	VLEV_120		0x00D0	/* 	VLEV = 1.20 V (See Datasheet for Regulator Tolerance)	*/
#define	VLEV_125		0x00E0	/* 	VLEV = 1.25 V (See Datasheet for Regulator Tolerance)	*/
#define	VLEV_130		0x00F0	/* 	VLEV = 1.30 V (See Datasheet for Regulator Tolerance)	*/
 
/* SYSCR Masks */
#define BMODE_BYPASS  0x0000  /* Bypass boot ROM, execute from 16-bit external memory */
#define BMODE_FLASH   0x0001  /* Use Boot ROM to load from 8-bit or 16-bit flash */
#define BMODE_SPIHOST 0x0002  /* Boot from SPI0 host (slave mode) */
#define BMODE_SPIMEM  0x0003  /* Boot from serial SPI memory */
 
 
 
/* *************  SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
 
/* SICu_IARv Masks	 */
/* u = A or B */
/* v = 0 to 7 */
/* w = 0 or 1 */
 
/* Per_number = 0 to 63 */
/* IVG_number = 7 to 15   */
#define Peripheral_IVG(Per_number, IVG_number)    \
				( (IVG_number) -7) << ( ((Per_number)%8) *4) 	   /* Peripheral #Per_number assigned IVG #IVG_number  */
																   /* Usage: r0.l = lo(Peripheral_IVG(62, 10)); */
																   /*        r0.h = hi(Peripheral_IVG(62, 10)); */
 
 
 
/* SICx_IMASKw Masks */
/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers  */
#define SIC_UNMASK_ALL         0x00000000  /* Unmask all peripheral interrupts */
#define SIC_MASK_ALL           0xFFFFFFFF  /* Mask all peripheral interrupts */
#define SIC_MASK(x)	       (1 << (x))    /* Mask Peripheral #x interrupt */
#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */
 
/* SIC_IWR Masks */
#define IWR_DISABLE_ALL        0x00000000  /* Wakeup Disable all peripherals */
#define IWR_ENABLE_ALL         0xFFFFFFFF  /* Wakeup Enable all peripherals */
/* x = pos 0 to 31, for 32-63 use value-32 */
#define IWR_ENABLE(x)	       (1 << (x))    /* Wakeup Enable Peripheral #x */
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */
 
/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
#define PLL_WAKEUP_IRQ      0x00000001      /* PLL Wakeup Interrupt Request */
#define IRQ_PLL_WAKEUP      0x00000001      /* PLL Wakeup Interrupt Request */
 
 
 
/* ********* WATCHDOG TIMER MASKS ******************** */
 
/* Watchdog Timer WDOG_CTL Register Masks */
 
#ifdef _MISRA_RULES
#define WDEV(x) (((x)<<1) & 0x0006u) /* event generated on roll over */
#else
#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
#endif /* _MISRA_RULES */
#define WDEV_RESET 0x0000 /* generate reset event on roll over */
#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
#define WDEV_NONE 0x0006 /* no event on roll over */
#define WDEN 0x0FF0 /* enable watchdog */
#define WDDIS 0x0AD0 /* disable watchdog */
#define WDRO 0x8000 /* watchdog rolled over latch */
 
/* depreciated WDOG_CTL Register Masks for legacy code */
 
 
#define ICTL WDEV
#define ENABLE_RESET WDEV_RESET
#define WDOG_RESET WDEV_RESET
#define ENABLE_NMI WDEV_NMI
#define WDOG_NMI WDEV_NMI
#define ENABLE_GPI WDEV_GPI
#define WDOG_GPI WDEV_GPI
#define DISABLE_EVT WDEV_NONE
#define WDOG_NONE WDEV_NONE
 
#define TMR_EN WDEN
#define WDOG_DISABLE  WDDIS
#define TRO WDRO
 
 
 
/* ***************************** UART CONTROLLER MASKS ********************** */
 
/* UART_LCR Register */
 
#define DLAB	0x80
#define SB      0x40
#define STP      0x20
#define EPS     0x10
#define PEN	0x08
#define STB	0x04
#ifdef _MISRA_RULES
#define WLS(x) (((x)-5u) & 0x03u) /* Word Length Select */
#else
#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
#endif /* _MISRA_RULES */
 
#define DLAB_P	0x07
#define SB_P	0x06
#define STP_P	0x05
#define EPS_P	0x04
#define PEN_P	0x03
#define STB_P	0x02
#define WLS_P1	0x01
#define WLS_P0	0x00
 
/* UART_MCR Register */
#define LOOP_ENA	0x10	/* Loopback Mode Enable */
#define LOOP_ENA_P	0x04
 
/* UART_LSR Register */
#define TEMT	0x40
#define THRE	0x20
#define BI	0x10
#define FE	0x08
#define PE	0x04
#define OE	0x02
#define DR	0x01
 
#define TEMP_P	0x06
#define THRE_P	0x05
#define BI_P	0x04
#define FE_P	0x03
#define PE_P	0x02
#define OE_P	0x01
#define DR_P	0x00
 
/* UART_IER Register */
#define ELSI	0x04
#define ETBEI	0x02
#define ERBFI	0x01
 
#define ELSI_P	0x02
#define ETBEI_P	0x01
#define ERBFI_P	0x00
 
/* UART_IIR Register */
#ifdef _MISRA_RULES
#define STATUS(x)	(((x) << 1) & 0x06u)
#else
#define STATUS(x)	(((x) << 1) & 0x06)
#endif /* _MISRA_RULES */
#define NINT		0x01
#define STATUS_P1	0x02
#define STATUS_P0	0x01
#define NINT_P		0x00
 
/* UART_GCTL Register */
#define FFE	0x20
#define FPE	0x10
#define RPOLC	0x08
#define TPOLC	0x04
#define IREN	0x02
#define UCEN	0x01
 
#define FFE_P	0x05
#define FPE_P	0x04
#define RPOLC_P	0x03
#define TPOLC_P	0x02
#define IREN_P	0x01
#define UCEN_P	0x00
 
/* **********  SERIAL PORT MASKS  ********************** */
 
/* SPORTx_TCR1 Masks */
#define TSPEN    0x0001  /* TX enable  */
#define ITCLK    0x0002  /* Internal TX Clock Select  */
#define TDTYPE   0x000C  /* TX Data Formatting Select */
#define TLSBIT   0x0010  /* TX Bit Order */
#define ITFS     0x0200  /* Internal TX Frame Sync Select  */
#define TFSR     0x0400  /* TX Frame Sync Required Select  */
#define DITFS    0x0800  /* Data Independent TX Frame Sync Select  */
#define LTFS     0x1000  /* Low TX Frame Sync Select  */
#define LATFS    0x2000  /* Late TX Frame Sync Select  */
#define TCKFE    0x4000  /* TX Clock Falling Edge Select  */
 
/* SPORTx_TCR2 Masks */
#define SLEN	    0x001F  /*TX Word Length  */
#define TXSE        0x0100  /*TX Secondary Enable */
#define TSFSE       0x0200  /*TX Stereo Frame Sync Enable */
#define TRFST       0x0400  /*TX Right-First Data Order  */
 
/* SPORTx_RCR1 Masks */
#define RSPEN    0x0001  /* RX enable  */
#define IRCLK    0x0002  /* Internal RX Clock Select  */
#define RDTYPE   0x000C  /* RX Data Formatting Select */
#define RULAW    0x0008  /* u-Law enable  */
#define RALAW    0x000C  /* A-Law enable  */
#define RLSBIT   0x0010  /* RX Bit Order */
#define IRFS     0x0200  /* Internal RX Frame Sync Select  */
#define RFSR     0x0400  /* RX Frame Sync Required Select  */
#define LRFS     0x1000  /* Low RX Frame Sync Select  */
#define LARFS    0x2000  /* Late RX Frame Sync Select  */
#define RCKFE    0x4000  /* RX Clock Falling Edge Select  */
 
/* SPORTx_RCR2 Masks */
#define SLEN	    0x001F  /*RX Word Length  */
#define RXSE        0x0100  /*RX Secondary Enable */
#define RSFSE       0x0200  /*RX Stereo Frame Sync Enable */
#define RRFST       0x0400  /*Right-First Data Order  */
 
/*SPORTx_STAT Masks */
#define RXNE		0x0001		/*RX FIFO Not Empty Status */
#define RUVF	    	0x0002  	/*RX Underflow Status */
#define ROVF		0x0004		/*RX Overflow Status */
#define TXF		0x0008		/*TX FIFO Full Status */
#define TUVF         	0x0010  	/*TX Underflow Status */
#define TOVF         	0x0020  	/*TX Overflow Status */
#define TXHRE        	0x0040  	/*TX Hold Register Empty */
 
/*SPORTx_MCMC1 Masks */
#define WSIZE		0x0000F000 	/*Multichannel Window Size Field */
#define WOFF		0x000003FF 	/*Multichannel Window Offset Field */
 
/*SPORTx_MCMC2 Masks */
#define MCCRM		0x00000003 	/*Multichannel Clock Recovery Mode */
#define MCDTXPE		0x00000004 	/*Multichannel DMA Transmit Packing */
#define MCDRXPE		0x00000008 	/*Multichannel DMA Receive Packing */
#define MCMEN		0x00000010 	/*Multichannel Frame Mode Enable */
#define FSDR		0x00000080 	/*Multichannel Frame Sync to Data Relationship */
#define MFD		0x0000F000 	/*Multichannel Frame Delay    */
 
/*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
 
/*//  PPI_CONTROL Masks         */
#define PORT_EN              0x00000001  /* PPI Port Enable  */
#define PORT_DIR             0x00000002  /* PPI Port Direction       */
#define XFR_TYPE             0x0000000C  /* PPI Transfer Type  */
#define PORT_CFG             0x00000030  /* PPI Port Configuration */
#define FLD_SEL              0x00000040  /* PPI Active Field Select */
#define PACK_EN              0x00000080  /* PPI Packing Mode */
#define DMA32                0x00000100  /* PPI 32-bit DMA Enable */
#define SKIP_EN              0x00000200  /* PPI Skip Element Enable */
#define SKIP_EO              0x00000400  /* PPI Skip Even/Odd Elements */
#define DLENGTH              0x00003800  /* PPI Data Length  */
#define DLEN_8		     0x0	     /* PPI Data Length mask for DLEN=8 */
#ifdef _MISRA_RULES
#define DLEN(x)	((((x)-9u) & 0x07u) << 11)  /* PPI Data Length (only works for x=10-->x=16) */
#else
#define DLEN(x)	((((x)-9) & 0x07) << 11)  /* PPI Data Length (only works for x=10-->x=16) */
#endif /* _MISRA_RULES */
#define POL                  0x0000C000  /* PPI Signal Polarities       */
 
 
/*// PPI_STATUS Masks                                          */
#define FLD	             0x00000400  /* Field Indicator   */
#define FT_ERR	             0x00000800  /* Frame Track Error */
#define OVR	             0x00001000  /* FIFO Overflow Error */
#define UNDR	             0x00002000  /* FIFO Underrun Error */
#define ERR_DET	      	     0x00004000  /* Error Detected Indicator */
#define ERR_NCOR	     0x00008000  /* Error Not Corrected Indicator */
 
/* **********  DMA CONTROLLER MASKS  *********************8 */
 
/*//DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */
#define DMAEN	        0x00000001  /* Channel Enable */
#define WNR	   	0x00000002  /* Channel Direction (W/R*) */
#define WDSIZE_8	0x00000000  /* Word Size 8 bits */
#define WDSIZE_16	0x00000004  /* Word Size 16 bits */
#define WDSIZE_32	0x00000008  /* Word Size 32 bits */
#define DMA2D	        0x00000010  /* 2D/1D* Mode */
#define RESTART         0x00000020  /* Restart */
#define DI_SEL	        0x00000040  /* Data Interrupt Select */
#define DI_EN	        0x00000080  /* Data Interrupt Enable */
#define NDSIZE	        0x00000900  /* Next Descriptor Size */
#define FLOW	        0x00007000  /* Flow Control */
 
 
#define DMAEN_P	            	0  /* Channel Enable */
#define WNR_P	            	1  /* Channel Direction (W/R*) */
#define DMA2D_P	        	4  /* 2D/1D* Mode */
#define RESTART_P	      	5  /* Restart */
#define DI_SEL_P	     	6  /* Data Interrupt Select */
#define DI_EN_P	            	7  /* Data Interrupt Enable */
 
/*//DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */
 
#define DMA_DONE		0x00000001  /* DMA Done Indicator */
#define DMA_ERR	        	0x00000002  /* DMA Error Indicator */
#define DFETCH	            	0x00000004  /* Descriptor Fetch Indicator */
#define DMA_RUN	            	0x00000008  /* DMA Running Indicator */
 
#define DMA_DONE_P	    	0  /* DMA Done Indicator */
#define DMA_ERR_P     		1 /* DMA Error Indicator */
#define DFETCH_P     		2  /* Descriptor Fetch Indicator */
#define DMA_RUN_P     		3  /* DMA Running Indicator */
 
/*//DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */
 
#define CTYPE	            0x00000040  /* DMA Channel Type Indicator */
#define CTYPE_P             6       /* DMA Channel Type Indicator BIT POSITION */
#define PCAP8	            0x00000080  /* DMA 8-bit Operation Indicator   */
#define PCAP16	            0x00000100  /* DMA 16-bit Operation Indicator */
#define PCAP32	            0x00000200  /* DMA 32-bit Operation Indicator */
#define PCAPWR	            0x00000400  /* DMA Write Operation Indicator */
#define PCAPRD	            0x00000800  /* DMA Read Operation Indicator */
#define PMAP	            0x00007000  /* DMA Peripheral Map Field */
 
/*  *************  GENERAL PURPOSE TIMER MASKS  ******************** */
 
/* PWM Timer bit definitions */
 
/* TIMER_ENABLE Register */
#define TIMEN0	0x0001
#define TIMEN1	0x0002
#define TIMEN2	0x0004
#define TIMEN3	0x0008
#define TIMEN4	0x0010
#define TIMEN5	0x0020
#define TIMEN6	0x0040
#define TIMEN7	0x0080
#define TIMEN8	0x0001
#define TIMEN9	0x0002
#define TIMEN10	0x0004
#define TIMEN11	0x0008
 
#define TIMEN0_P	0x00
#define TIMEN1_P	0x01
#define TIMEN2_P	0x02
#define TIMEN3_P	0x03
#define TIMEN4_P	0x04
#define TIMEN5_P	0x05
#define TIMEN6_P	0x06
#define TIMEN7_P	0x07
#define TIMEN8_P	0x00
#define TIMEN9_P	0x01
#define TIMEN10_P	0x02
#define TIMEN11_P	0x03
 
/* TIMER_DISABLE Register */
#define TIMDIS0		0x0001
#define TIMDIS1		0x0002
#define TIMDIS2		0x0004
#define TIMDIS3		0x0008
#define TIMDIS4		0x0010
#define TIMDIS5		0x0020
#define TIMDIS6		0x0040
#define TIMDIS7		0x0080
#define TIMDIS8		0x0001
#define TIMDIS9		0x0002
#define TIMDIS10	0x0004
#define TIMDIS11	0x0008
 
#define TIMDIS0_P	0x00
#define TIMDIS1_P	0x01
#define TIMDIS2_P	0x02
#define TIMDIS3_P	0x03
#define TIMDIS4_P	0x04
#define TIMDIS5_P	0x05
#define TIMDIS6_P	0x06
#define TIMDIS7_P	0x07
#define TIMDIS8_P	0x00
#define TIMDIS9_P	0x01
#define TIMDIS10_P	0x02
#define TIMDIS11_P	0x03
 
/* TIMER_STATUS Register */
#define TIMIL0		0x00000001
#define TIMIL1		0x00000002
#define TIMIL2		0x00000004
#define TIMIL3		0x00000008
#define TIMIL4		0x00010000
#define TIMIL5		0x00020000
#define TIMIL6		0x00040000
#define TIMIL7		0x00080000
#define TIMIL8		0x0001
#define TIMIL9		0x0002
#define TIMIL10		0x0004
#define TIMIL11		0x0008
#define TOVF_ERR0	0x00000010
#define TOVF_ERR1	0x00000020
#define TOVF_ERR2	0x00000040
#define TOVF_ERR3	0x00000080
#define TOVF_ERR4	0x00100000
#define TOVF_ERR5	0x00200000
#define TOVF_ERR6	0x00400000
#define TOVF_ERR7	0x00800000
#define TOVF_ERR8	0x0010
#define TOVF_ERR9	0x0020
#define TOVF_ERR10	0x0040
#define TOVF_ERR11	0x0080
#define TRUN0		0x00001000
#define TRUN1		0x00002000
#define TRUN2		0x00004000
#define TRUN3		0x00008000
#define TRUN4		0x10000000
#define TRUN5		0x20000000
#define TRUN6		0x40000000
#define TRUN7		0x80000000
#define TRUN8		0x1000
#define TRUN9		0x2000
#define TRUN10		0x4000
#define TRUN11		0x8000
 
#define TIMIL0_P	0x00
#define TIMIL1_P	0x01
#define TIMIL2_P	0x02
#define TIMIL3_P	0x03
#define TIMIL4_P	0x10
#define TIMIL5_P	0x11
#define TIMIL6_P	0x12
#define TIMIL7_P	0x13
#define TIMIL8_P	0x00
#define TIMIL9_P	0x01
#define TIMIL10_P	0x02
#define TIMIL11_P	0x03
#define TOVF_ERR0_P	0x04
#define TOVF_ERR1_P	0x05
#define TOVF_ERR2_P	0x06
#define TOVF_ERR3_P	0x07
#define TOVF_ERR4_P	0x14
#define TOVF_ERR5_P	0x15
#define TOVF_ERR6_P	0x16
#define TOVF_ERR7_P	0x17
#define TOVF_ERR8_P	0x04
#define TOVF_ERR9_P	0x05
#define TOVF_ERR10_P	0x06
#define TOVF_ERR11_P	0x07
#define TRUN0_P		0x0C
#define TRUN1_P		0x0D
#define TRUN2_P		0x0E
#define TRUN3_P		0x0F
#define TRUN4_P		0x1C
#define TRUN5_P		0x1D
#define TRUN6_P		0x1E
#define TRUN7_P		0x1F
#define TRUN8_P		0x0C
#define TRUN9_P		0x0D
#define TRUN10_P	0x0E
#define TRUN11_P	0x0F
 
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
#define TOVL_ERR0 TOVF_ERR0
#define TOVL_ERR1 TOVF_ERR1
#define TOVL_ERR2 TOVF_ERR2
#define TOVL_ERR3 TOVF_ERR3
#define TOVL_ERR4 TOVF_ERR4
#define TOVL_ERR5 TOVF_ERR5
#define TOVL_ERR6 TOVF_ERR6
#define TOVL_ERR7 TOVF_ERR7
#define TOVL_ERR8 TOVF_ERR8
#define TOVL_ERR9 TOVF_ERR9
#define TOVL_ERR10 TOVF_ERR10
#define TOVL_ERR11 TOVF_ERR11
#define TOVL_ERR0_P TOVF_ERR0_P
#define TOVL_ERR1_P TOVF_ERR1_P
#define TOVL_ERR2_P TOVF_ERR2_P
#define TOVL_ERR3_P TOVF_ERR3_P
#define TOVL_ERR4_P TOVF_ERR4_P
#define TOVL_ERR5_P TOVF_ERR5_P
#define TOVL_ERR6_P TOVF_ERR6_P
#define TOVL_ERR7_P TOVF_ERR7_P
#define TOVL_ERR8_P TOVF_ERR8_P
#define TOVL_ERR9_P TOVF_ERR9_P
#define TOVL_ERR10_P TOVF_ERR10_P
#define TOVL_ERR11_P TOVF_ERR11_P
 
/* TIMERx_CONFIG Registers */
#define PWM_OUT		0x0001
#define WDTH_CAP	0x0002
#define EXT_CLK		0x0003
#define PULSE_HI	0x0004
#define PERIOD_CNT	0x0008
#define IRQ_ENA		0x0010
#define TIN_SEL		0x0020
#define OUT_DIS		0x0040
#define CLK_SEL		0x0080
#define TOGGLE_HI	0x0100
#define EMU_RUN		0x0200
#ifdef _MISRA_RULES
#define ERR_TYP(x)	(((x) & 0x03u) << 14)
#else
#define ERR_TYP(x)	(((x) & 0x03) << 14)
#endif /* _MISRA_RULES */
 
#define TMODE_P0		0x00
#define TMODE_P1		0x01
#define PULSE_HI_P		0x02
#define PERIOD_CNT_P		0x03
#define IRQ_ENA_P		0x04
#define TIN_SEL_P		0x05
#define OUT_DIS_P		0x06
#define CLK_SEL_P		0x07
#define TOGGLE_HI_P		0x08
#define EMU_RUN_P		0x09
#define ERR_TYP_P0		0x0E
#define ERR_TYP_P1		0x0F
 
 
/*/ ******************   PROGRAMMABLE FLAG MASKS  ********************* */
 
/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks */
#define PF0         0x0001
#define PF1         0x0002
#define PF2         0x0004
#define PF3         0x0008
#define PF4         0x0010
#define PF5         0x0020
#define PF6         0x0040
#define PF7         0x0080
#define PF8         0x0100
#define PF9         0x0200
#define PF10        0x0400
#define PF11        0x0800
#define PF12        0x1000
#define PF13        0x2000
#define PF14        0x4000
#define PF15        0x8000
 
 
/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  BIT POSITIONS */
#define PF0_P         0
#define PF1_P         1
#define PF2_P         2
#define PF3_P         3
#define PF4_P         4
#define PF5_P         5
#define PF6_P         6
#define PF7_P         7
#define PF8_P         8
#define PF9_P         9
#define PF10_P        10
#define PF11_P        11
#define PF12_P        12
#define PF13_P        13
#define PF14_P        14
#define PF15_P        15
 
/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  **************** */
 
/*// SPI_CTL Masks */
#define TIMOD                  0x00000003  /* Transfer initiation mode and interrupt generation */
#define SZ                     0x00000004  /* Send Zero (=0) or last (=1) word when TDBR empty. */
#define GM                     0x00000008  /* When RDBR full, get more (=1) data or discard (=0) incoming Data */
#define PSSE                   0x00000010  /* Enable (=1) Slave-Select input for Master. */
#define EMISO                  0x00000020  /* Enable (=1) MISO pin as an output. */
#define SIZE                   0x00000100  /* Word length (0 => 8 bits, 1 => 16 bits) */
#define LSBF                   0x00000200  /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
#define CPHA                   0x00000400  /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
#define CPOL                   0x00000800  /* Clock polarity (0 => active-high, 1 => active-low) */
#define MSTR                   0x00001000  /* Configures SPI as master (=1) or slave (=0) */
#define WOM                    0x00002000  /* Open drain (=1) data output enable (for MOSI and MISO) */
#define SPE                    0x00004000  /* SPI module enable (=1), disable (=0) */
 
/*// SPI_FLG Masks */
#define FLS1                   0x00000002  /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2                   0x00000004  /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3                   0x00000008  /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4                   0x00000010  /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5                   0x00000020  /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6                   0x00000040  /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7                   0x00000080  /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1                   0x00000200  /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
#define FLG2                   0x00000400  /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3                   0x00000800  /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
#define FLG4                   0x00001000  /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
#define FLG5                   0x00002000  /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
#define FLG6                   0x00004000  /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
#define FLG7                   0x00008000  /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
 
/*// SPI_FLG Bit Positions */
#define FLS1_P                 0x00000001  /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2_P                 0x00000002  /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3_P                 0x00000003  /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4_P                 0x00000004  /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5_P                 0x00000005  /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6_P                 0x00000006  /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7_P                 0x00000007  /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1_P                 0x00000009  /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
#define FLG2_P                 0x0000000A  /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3_P                 0x0000000B  /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
#define FLG4_P                 0x0000000C  /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
#define FLG5_P                 0x0000000D  /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
#define FLG6_P                 0x0000000E  /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
#define FLG7_P                 0x0000000F  /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
 
/*// SPI_STAT Masks */
#define SPIF                   0x00000001  /* Set (=1) when SPI single-word transfer complete */
#define MODF                   0x00000002  /* Set (=1) in a master device when some other device tries to become master */
#define TXE                    0x00000004  /* Set (=1) when transmission occurs with no new data in SPI_TDBR */
#define TXS                    0x00000008  /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
#define RBSY                   0x00000010  /* Set (=1) when data is received with RDBR full */
#define RXS                    0x00000020  /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full)  */
#define TXCOL                  0x00000040  /* When set (=1), corrupt data may have been transmitted  */
 
/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */
 
/* AMGCTL Masks */
#define AMCKEN			0x0001  /* Enable CLKOUT */
#define AMBEN_B0		0x0002  /* Enable Asynchronous Memory Bank 0 only */
#define AMBEN_B0_B1		0x0004  /* Enable Asynchronous Memory Banks 0 & 1 only */
#define AMBEN_B0_B1_B2	0x0006  /* Enable Asynchronous Memory Banks 0, 1, and 2 */
#define AMBEN_ALL		0x0008  /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
#define B0_PEN			0x0010  /* Enable 16-bit packing Bank 0  */
#define B1_PEN			0x0020  /* Enable 16-bit packing Bank 1  */
#define B2_PEN			0x0040  /* Enable 16-bit packing Bank 2  */
#define B3_PEN			0x0080  /* Enable 16-bit packing Bank 3  */
 
/* AMGCTL Bit Positions */
#define AMCKEN_P		0x0000  /* Enable CLKOUT */
#define AMBEN_P0		0x0001  /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
#define AMBEN_P1		0x0002  /* Asynchronous Memory Enable, 010 - banks 0&1 enabled,  011 - banks 0-3 enabled */
#define AMBEN_P2		0x0003  /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
#define B0_PEN_P		0x0004  /* Enable 16-bit packing Bank 0  */
#define B1_PEN_P		0x0005  /* Enable 16-bit packing Bank 1  */
#define B2_PEN_P		0x0006  /* Enable 16-bit packing Bank 2  */
#define B3_PEN_P		0x0007  /* Enable 16-bit packing Bank 3  */
#define CDPRIO                  0x0100  /* DMA has priority over core for for external accesses */
 
/* AMBCTL0 Masks */
#define B0RDYEN	0x00000001  /* Bank 0 RDY Enable, 0=disable, 1=enable */
#define B0RDYPOL 0x00000002  /* Bank 0 RDY Active high, 0=active low, 1=active high */
#define B0TT_1	0x00000004  /* Bank 0 Transition Time from Read to Write = 1 cycle */
#define B0TT_2	0x00000008  /* Bank 0 Transition Time from Read to Write = 2 cycles */
#define B0TT_3	0x0000000C  /* Bank 0 Transition Time from Read to Write = 3 cycles */
#define B0TT_4	0x00000000  /* Bank 0 Transition Time from Read to Write = 4 cycles */
#define B0ST_1	0x00000010  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
#define B0ST_2	0x00000020  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
#define B0ST_3	0x00000030  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
#define B0ST_4	0x00000000  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
#define B0HT_1	0x00000040  /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
#define B0HT_2	0x00000080  /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
#define B0HT_3	0x000000C0  /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
#define B0HT_0	0x00000000  /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
#define B0RAT_1			0x00000100  /* Bank 0 Read Access Time = 1 cycle */
#define B0RAT_2			0x00000200  /* Bank 0 Read Access Time = 2 cycles */
#define B0RAT_3			0x00000300  /* Bank 0 Read Access Time = 3 cycles */
#define B0RAT_4			0x00000400  /* Bank 0 Read Access Time = 4 cycles */
#define B0RAT_5			0x00000500  /* Bank 0 Read Access Time = 5 cycles */
#define B0RAT_6			0x00000600  /* Bank 0 Read Access Time = 6 cycles */
#define B0RAT_7			0x00000700  /* Bank 0 Read Access Time = 7 cycles */
#define B0RAT_8			0x00000800  /* Bank 0 Read Access Time = 8 cycles */
#define B0RAT_9			0x00000900  /* Bank 0 Read Access Time = 9 cycles */
#define B0RAT_10		0x00000A00  /* Bank 0 Read Access Time = 10 cycles */
#define B0RAT_11		0x00000B00  /* Bank 0 Read Access Time = 11 cycles */
#define B0RAT_12		0x00000C00  /* Bank 0 Read Access Time = 12 cycles */
#define B0RAT_13		0x00000D00  /* Bank 0 Read Access Time = 13 cycles */
#define B0RAT_14		0x00000E00  /* Bank 0 Read Access Time = 14 cycles */
#define B0RAT_15		0x00000F00  /* Bank 0 Read Access Time = 15 cycles */
#define B0WAT_1			0x00001000  /* Bank 0 Write Access Time = 1 cycle */
#define B0WAT_2			0x00002000  /* Bank 0 Write Access Time = 2 cycles */
#define B0WAT_3			0x00003000  /* Bank 0 Write Access Time = 3 cycles */
#define B0WAT_4			0x00004000  /* Bank 0 Write Access Time = 4 cycles */
#define B0WAT_5			0x00005000  /* Bank 0 Write Access Time = 5 cycles */
#define B0WAT_6			0x00006000  /* Bank 0 Write Access Time = 6 cycles */
#define B0WAT_7			0x00007000  /* Bank 0 Write Access Time = 7 cycles */
#define B0WAT_8			0x00008000  /* Bank 0 Write Access Time = 8 cycles */
#define B0WAT_9			0x00009000  /* Bank 0 Write Access Time = 9 cycles */
#define B0WAT_10		0x0000A000  /* Bank 0 Write Access Time = 10 cycles */
#define B0WAT_11		0x0000B000  /* Bank 0 Write Access Time = 11 cycles */
#define B0WAT_12		0x0000C000  /* Bank 0 Write Access Time = 12 cycles */
#define B0WAT_13		0x0000D000  /* Bank 0 Write Access Time = 13 cycles */
#define B0WAT_14		0x0000E000  /* Bank 0 Write Access Time = 14 cycles */
#define B0WAT_15		0x0000F000  /* Bank 0 Write Access Time = 15 cycles */
#define B1RDYEN			0x00010000  /* Bank 1 RDY enable, 0=disable, 1=enable */
#define B1RDYPOL		0x00020000  /* Bank 1 RDY Active high, 0=active low, 1=active high */
#define B1TT_1			0x00040000  /* Bank 1 Transition Time from Read to Write = 1 cycle */
#define B1TT_2			0x00080000  /* Bank 1 Transition Time from Read to Write = 2 cycles */
#define B1TT_3			0x000C0000  /* Bank 1 Transition Time from Read to Write = 3 cycles */
#define B1TT_4			0x00000000  /* Bank 1 Transition Time from Read to Write = 4 cycles */
#define B1ST_1			0x00100000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B1ST_2			0x00200000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B1ST_3			0x00300000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B1ST_4			0x00000000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B1HT_1			0x00400000  /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B1HT_2			0x00800000  /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B1HT_3			0x00C00000  /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B1HT_0			0x00000000  /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B1RAT_1			0x01000000  /* Bank 1 Read Access Time = 1 cycle */
#define B1RAT_2			0x02000000  /* Bank 1 Read Access Time = 2 cycles */
#define B1RAT_3			0x03000000  /* Bank 1 Read Access Time = 3 cycles */
#define B1RAT_4			0x04000000  /* Bank 1 Read Access Time = 4 cycles */
#define B1RAT_5			0x05000000  /* Bank 1 Read Access Time = 5 cycles */
#define B1RAT_6			0x06000000  /* Bank 1 Read Access Time = 6 cycles */
#define B1RAT_7			0x07000000  /* Bank 1 Read Access Time = 7 cycles */
#define B1RAT_8			0x08000000  /* Bank 1 Read Access Time = 8 cycles */
#define B1RAT_9			0x09000000  /* Bank 1 Read Access Time = 9 cycles */
#define B1RAT_10		0x0A000000  /* Bank 1 Read Access Time = 10 cycles */
#define B1RAT_11		0x0B000000  /* Bank 1 Read Access Time = 11 cycles */
#define B1RAT_12		0x0C000000  /* Bank 1 Read Access Time = 12 cycles */
#define B1RAT_13		0x0D000000  /* Bank 1 Read Access Time = 13 cycles */
#define B1RAT_14		0x0E000000  /* Bank 1 Read Access Time = 14 cycles */
#define B1RAT_15		0x0F000000  /* Bank 1 Read Access Time = 15 cycles */
#define B1WAT_1			0x10000000 /* Bank 1 Write Access Time = 1 cycle */
#define B1WAT_2			0x20000000  /* Bank 1 Write Access Time = 2 cycles */
#define B1WAT_3			0x30000000  /* Bank 1 Write Access Time = 3 cycles */
#define B1WAT_4			0x40000000  /* Bank 1 Write Access Time = 4 cycles */
#define B1WAT_5			0x50000000  /* Bank 1 Write Access Time = 5 cycles */
#define B1WAT_6			0x60000000  /* Bank 1 Write Access Time = 6 cycles */
#define B1WAT_7			0x70000000  /* Bank 1 Write Access Time = 7 cycles */
#define B1WAT_8			0x80000000  /* Bank 1 Write Access Time = 8 cycles */
#define B1WAT_9			0x90000000  /* Bank 1 Write Access Time = 9 cycles */
#define B1WAT_10		0xA0000000  /* Bank 1 Write Access Time = 10 cycles */
#define B1WAT_11		0xB0000000  /* Bank 1 Write Access Time = 11 cycles */
#define B1WAT_12		0xC0000000  /* Bank 1 Write Access Time = 12 cycles */
#define B1WAT_13		0xD0000000  /* Bank 1 Write Access Time = 13 cycles */
#define B1WAT_14		0xE0000000  /* Bank 1 Write Access Time = 14 cycles */
#define B1WAT_15		0xF0000000  /* Bank 1 Write Access Time = 15 cycles */
 
/* AMBCTL1 Masks */
#define B2RDYEN			0x00000001  /* Bank 2 RDY Enable, 0=disable, 1=enable */
#define B2RDYPOL		0x00000002  /* Bank 2 RDY Active high, 0=active low, 1=active high */
#define B2TT_1			0x00000004  /* Bank 2 Transition Time from Read to Write = 1 cycle */
#define B2TT_2			0x00000008  /* Bank 2 Transition Time from Read to Write = 2 cycles */
#define B2TT_3			0x0000000C  /* Bank 2 Transition Time from Read to Write = 3 cycles */
#define B2TT_4			0x00000000  /* Bank 2 Transition Time from Read to Write = 4 cycles */
#define B2ST_1			0x00000010  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B2ST_2			0x00000020  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B2ST_3			0x00000030  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B2ST_4			0x00000000  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B2HT_1			0x00000040  /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B2HT_2			0x00000080  /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B2HT_3			0x000000C0  /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B2HT_0			0x00000000  /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B2RAT_1			0x00000100  /* Bank 2 Read Access Time = 1 cycle */
#define B2RAT_2			0x00000200  /* Bank 2 Read Access Time = 2 cycles */
#define B2RAT_3			0x00000300  /* Bank 2 Read Access Time = 3 cycles */
#define B2RAT_4			0x00000400  /* Bank 2 Read Access Time = 4 cycles */
#define B2RAT_5			0x00000500  /* Bank 2 Read Access Time = 5 cycles */
#define B2RAT_6			0x00000600  /* Bank 2 Read Access Time = 6 cycles */
#define B2RAT_7			0x00000700  /* Bank 2 Read Access Time = 7 cycles */
#define B2RAT_8			0x00000800  /* Bank 2 Read Access Time = 8 cycles */
#define B2RAT_9			0x00000900  /* Bank 2 Read Access Time = 9 cycles */
#define B2RAT_10		0x00000A00  /* Bank 2 Read Access Time = 10 cycles */
#define B2RAT_11		0x00000B00  /* Bank 2 Read Access Time = 11 cycles */
#define B2RAT_12		0x00000C00  /* Bank 2 Read Access Time = 12 cycles */
#define B2RAT_13		0x00000D00  /* Bank 2 Read Access Time = 13 cycles */
#define B2RAT_14		0x00000E00  /* Bank 2 Read Access Time = 14 cycles */
#define B2RAT_15		0x00000F00  /* Bank 2 Read Access Time = 15 cycles */
#define B2WAT_1			0x00001000  /* Bank 2 Write Access Time = 1 cycle */
#define B2WAT_2			0x00002000  /* Bank 2 Write Access Time = 2 cycles */
#define B2WAT_3			0x00003000  /* Bank 2 Write Access Time = 3 cycles */
#define B2WAT_4			0x00004000  /* Bank 2 Write Access Time = 4 cycles */
#define B2WAT_5			0x00005000  /* Bank 2 Write Access Time = 5 cycles */
#define B2WAT_6			0x00006000  /* Bank 2 Write Access Time = 6 cycles */
#define B2WAT_7			0x00007000  /* Bank 2 Write Access Time = 7 cycles */
#define B2WAT_8			0x00008000  /* Bank 2 Write Access Time = 8 cycles */
#define B2WAT_9			0x00009000  /* Bank 2 Write Access Time = 9 cycles */
#define B2WAT_10		0x0000A000  /* Bank 2 Write Access Time = 10 cycles */
#define B2WAT_11		0x0000B000  /* Bank 2 Write Access Time = 11 cycles */
#define B2WAT_12		0x0000C000  /* Bank 2 Write Access Time = 12 cycles */
#define B2WAT_13		0x0000D000  /* Bank 2 Write Access Time = 13 cycles */
#define B2WAT_14		0x0000E000  /* Bank 2 Write Access Time = 14 cycles */
#define B2WAT_15		0x0000F000  /* Bank 2 Write Access Time = 15 cycles */
#define B3RDYEN			0x00010000  /* Bank 3 RDY enable, 0=disable, 1=enable */
#define B3RDYPOL		0x00020000  /* Bank 3 RDY Active high, 0=active low, 1=active high */
#define B3TT_1			0x00040000  /* Bank 3 Transition Time from Read to Write = 1 cycle */
#define B3TT_2			0x00080000  /* Bank 3 Transition Time from Read to Write = 2 cycles */
#define B3TT_3			0x000C0000  /* Bank 3 Transition Time from Read to Write = 3 cycles */
#define B3TT_4			0x00000000  /* Bank 3 Transition Time from Read to Write = 4 cycles */
#define B3ST_1			0x00100000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B3ST_2			0x00200000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B3ST_3			0x00300000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B3ST_4			0x00000000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B3HT_1			0x00400000  /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B3HT_2			0x00800000  /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B3HT_3			0x00C00000  /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B3HT_0			0x00000000  /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B3RAT_1			0x01000000 /* Bank 3 Read Access Time = 1 cycle */
#define B3RAT_2			0x02000000  /* Bank 3 Read Access Time = 2 cycles */
#define B3RAT_3			0x03000000  /* Bank 3 Read Access Time = 3 cycles */
#define B3RAT_4			0x04000000  /* Bank 3 Read Access Time = 4 cycles */
#define B3RAT_5			0x05000000  /* Bank 3 Read Access Time = 5 cycles */
#define B3RAT_6			0x06000000  /* Bank 3 Read Access Time = 6 cycles */
#define B3RAT_7			0x07000000  /* Bank 3 Read Access Time = 7 cycles */
#define B3RAT_8			0x08000000  /* Bank 3 Read Access Time = 8 cycles */
#define B3RAT_9			0x09000000  /* Bank 3 Read Access Time = 9 cycles */
#define B3RAT_10		0x0A000000  /* Bank 3 Read Access Time = 10 cycles */
#define B3RAT_11		0x0B000000  /* Bank 3 Read Access Time = 11 cycles */
#define B3RAT_12		0x0C000000  /* Bank 3 Read Access Time = 12 cycles */
#define B3RAT_13		0x0D000000  /* Bank 3 Read Access Time = 13 cycles */
#define B3RAT_14		0x0E000000  /* Bank 3 Read Access Time = 14 cycles */
#define B3RAT_15		0x0F000000  /* Bank 3 Read Access Time = 15 cycles */
#define B3WAT_1			0x10000000 /* Bank 3 Write Access Time = 1 cycle */
#define B3WAT_2			0x20000000  /* Bank 3 Write Access Time = 2 cycles */
#define B3WAT_3			0x30000000  /* Bank 3 Write Access Time = 3 cycles */
#define B3WAT_4			0x40000000  /* Bank 3 Write Access Time = 4 cycles */
#define B3WAT_5			0x50000000  /* Bank 3 Write Access Time = 5 cycles */
#define B3WAT_6			0x60000000  /* Bank 3 Write Access Time = 6 cycles */
#define B3WAT_7			0x70000000  /* Bank 3 Write Access Time = 7 cycles */
#define B3WAT_8			0x80000000  /* Bank 3 Write Access Time = 8 cycles */
#define B3WAT_9			0x90000000  /* Bank 3 Write Access Time = 9 cycles */
#define B3WAT_10		0xA0000000  /* Bank 3 Write Access Time = 10 cycles */
#define B3WAT_11		0xB0000000  /* Bank 3 Write Access Time = 11 cycles */
#define B3WAT_12		0xC0000000  /* Bank 3 Write Access Time = 12 cycles */
#define B3WAT_13		0xD0000000  /* Bank 3 Write Access Time = 13 cycles */
#define B3WAT_14		0xE0000000  /* Bank 3 Write Access Time = 14 cycles */
#define B3WAT_15		0xF0000000  /* Bank 3 Write Access Time = 15 cycles */
 
 
/* **********************  SDRAM CONTROLLER MASKS  *************************** */
 
/* EBIU_SDGCTL Masks */
#define PASR_ALL                0x00000000          /* All 4 SDRAM Banks Refreshed In Self-Refresh */
#define PASR_B0_B1              0x00000010          /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */
#define PASR_B0                 0x00000020          /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */
#define SCTLE			0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
#define CL_2			0x00000008 /* SDRAM CAS latency = 2 cycles */
#define CL_3			0x0000000C /* SDRAM CAS latency = 3 cycles */
#define CL           0x0000000C /* SDRAM CAS latency */
#define PFE			0x00000010 /* Enable SDRAM prefetch */
#define PFP			0x00000020 /* Prefetch has priority over AMC requests */
#define PASR      0x00000030 /* SDRAM partial array self-refresh */
#define TRAS_1			0x00000040 /* SDRAM tRAS = 1 cycle */
#define TRAS_2			0x00000080 /* SDRAM tRAS = 2 cycles */
#define TRAS_3			0x000000C0 /* SDRAM tRAS = 3 cycles */
#define TRAS_4			0x00000100 /* SDRAM tRAS = 4 cycles */
#define TRAS_5			0x00000140 /* SDRAM tRAS = 5 cycles */
#define TRAS_6			0x00000180 /* SDRAM tRAS = 6 cycles */
#define TRAS_7			0x000001C0 /* SDRAM tRAS = 7 cycles */
#define TRAS_8			0x00000200 /* SDRAM tRAS = 8 cycles */
#define TRAS_9			0x00000240 /* SDRAM tRAS = 9 cycles */
#define TRAS_10			0x00000280 /* SDRAM tRAS = 10 cycles */
#define TRAS_11			0x000002C0 /* SDRAM tRAS = 11 cycles */
#define TRAS_12			0x00000300 /* SDRAM tRAS = 12 cycles */
#define TRAS_13			0x00000340 /* SDRAM tRAS = 13 cycles */
#define TRAS_14			0x00000380 /* SDRAM tRAS = 14 cycles */
#define TRAS_15			0x000003C0 /* SDRAM tRAS = 15 cycles */
#define TRAS            0x000003C0 /* SDRAM tRAS in SCLK cycles */
#define TRP_1			0x00000800 /* SDRAM tRP = 1 cycle */
#define TRP_2			0x00001000 /* SDRAM tRP = 2 cycles */
#define TRP_3			0x00001800 /* SDRAM tRP = 3 cycles */
#define TRP_4			0x00002000 /* SDRAM tRP = 4 cycles */
#define TRP_5			0x00002800 /* SDRAM tRP = 5 cycles */
#define TRP_6			0x00003000 /* SDRAM tRP = 6 cycles */
#define TRP_7			0x00003800 /* SDRAM tRP = 7 cycles */
#define TRP          0x00003800 /* SDRAM tRP in SCLK cycles */
#define TRCD_1			0x00008000 /* SDRAM tRCD = 1 cycle */
#define TRCD_2			0x00010000 /* SDRAM tRCD = 2 cycles */
#define TRCD_3			0x00018000 /* SDRAM tRCD = 3 cycles */
#define TRCD_4			0x00020000 /* SDRAM tRCD = 4 cycles */
#define TRCD_5			0x00028000 /* SDRAM tRCD = 5 cycles */
#define TRCD_6			0x00030000 /* SDRAM tRCD = 6 cycles */
#define TRCD_7			0x00038000 /* SDRAM tRCD = 7 cycles */
#define TRCD         0x00030000 /* SDRAM tRCD in SCLK cycles */
#define TWR_1			0x00080000 /* SDRAM tWR = 1 cycle */
#define TWR_2			0x00100000 /* SDRAM tWR = 2 cycles */
#define TWR_3			0x00180000 /* SDRAM tWR = 3 cycles */
#define TWR          0x00180000 /* SDRAM tWR in SCLK cycles */
#define PUPSD			0x00200000 /*Power-up start delay */
#define PSM			0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
#define PSS				0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */
#define SRFS			0x01000000 /* Start SDRAM self-refresh mode */
#define EBUFE			0x02000000 /* Enable external buffering timing */
#define FBBRW			0x04000000 /* Fast back-to-back read write enable */
#define EMREN			0x10000000 /* Extended mode register enable */
#define TCSR			0x20000000 /* Temp compensated self refresh value 85 deg C */
#define CDDBG			0x40000000 /* Tristate SDRAM controls during bus grant */
 
/* EBIU_SDBCTL Masks */
#define EBSZ            0x000E    /* SDRAM external bank size */
#define EBCAW           0x0030    /* SDRAM external bank column address width */
#define EB0_E				0x00000001 /* Enable SDRAM external bank 0 */
#define EB0_SZ_16			0x00000000 /* SDRAM external bank size = 16MB */
#define EB0_SZ_32			0x00000002 /* SDRAM external bank size = 32MB */
#define EB0_SZ_64			0x00000004 /* SDRAM external bank size = 64MB */
#define EB0_SZ_128			0x00000006 /* SDRAM external bank size = 128MB */
#define EB0_CAW_8			0x00000000 /* SDRAM external bank column address width = 8 bits */
#define EB0_CAW_9			0x00000010 /* SDRAM external bank column address width = 9 bits */
#define EB0_CAW_10			0x00000020 /* SDRAM external bank column address width = 9 bits */
#define EB0_CAW_11			0x00000030 /* SDRAM external bank column address width = 9 bits */
 
#define EB1_E				0x00000100 /* Enable SDRAM external bank 1 */
#define EB1__SZ_16			0x00000000 /* SDRAM external bank size = 16MB */
#define EB1__SZ_32			0x00000200 /* SDRAM external bank size = 32MB */
#define EB1__SZ_64			0x00000400 /* SDRAM external bank size = 64MB */
#define EB1__SZ_128			0x00000600 /* SDRAM external bank size = 128MB */
#define EB1__CAW_8			0x00000000 /* SDRAM external bank column address width = 8 bits */
#define EB1__CAW_9			0x00001000 /* SDRAM external bank column address width = 9 bits */
#define EB1__CAW_10			0x00002000 /* SDRAM external bank column address width = 9 bits */
#define EB1__CAW_11			0x00003000 /* SDRAM external bank column address width = 9 bits */
 
#define EB2__E				0x00010000 /* Enable SDRAM external bank 2 */
#define EB2__SZ_16			0x00000000 /* SDRAM external bank size = 16MB */
#define EB2__SZ_32			0x00020000 /* SDRAM external bank size = 32MB */
#define EB2__SZ_64			0x00040000 /* SDRAM external bank size = 64MB */
#define EB2__SZ_128			0x00060000 /* SDRAM external bank size = 128MB */
#define EB2__CAW_8			0x00000000 /* SDRAM external bank column address width = 8 bits */
#define EB2__CAW_9			0x00100000 /* SDRAM external bank column address width = 9 bits */
#define EB2__CAW_10			0x00200000 /* SDRAM external bank column address width = 9 bits */
#define EB2__CAW_11			0x00300000 /* SDRAM external bank column address width = 9 bits */
 
#define EB3__E				0x01000000 /* Enable SDRAM external bank 3 */
#define EB3__SZ_16			0x00000000 /* SDRAM external bank size = 16MB */
#define EB3__SZ_32			0x02000000 /* SDRAM external bank size = 32MB */
#define EB3__SZ_64			0x04000000 /* SDRAM external bank size = 64MB */
#define EB3__SZ_128			0x06000000 /* SDRAM external bank size = 128MB */
#define EB3__CAW_8			0x00000000 /* SDRAM external bank column address width = 8 bits */
#define EB3__CAW_9			0x10000000 /* SDRAM external bank column address width = 9 bits */
#define EB3__CAW_10			0x20000000 /* SDRAM external bank column address width = 9 bits */
#define EB3__CAW_11			0x30000000 /* SDRAM external bank column address width = 9 bits */
 
/* EBIU_SDSTAT Masks */
#define SDCI			0x00000001 /* SDRAM controller is idle  */
#define SDSRA			0x00000002 /* SDRAM SDRAM self refresh is active */
#define SDPUA			0x00000004 /* SDRAM power up active  */
#define SDRS			0x00000008 /* SDRAM is in reset state */
#define SDEASE		    0x00000010 /* SDRAM EAB sticky error status - W1C */
#define BGSTAT			0x00000020 /* Bus granted */
 
#ifdef _MISRA_RULES
#pragma diag(pop)
#endif /* _MISRA_RULES */
 
#endif /* _DEF_BF561_H */
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.