URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.18.0/] [libgloss/] [mips/] [Makefile.in] - Rev 420
Go to most recent revision | Compare with Previous | Blame | View Log
# Copyright (c) 1995, 1996, 1997, 1998, 1999, 2000 Cygnus Support
#
# The authors hereby grant permission to use, copy, modify, distribute,
# and license this software and its documentation for any purpose, provided
# that existing copyright notices are retained in all copies and that this
# notice is included verbatim in any distributions. No written agreement,
# license, or royalty fee is required for any of the authorized uses.
# Modifications to this software may be copyrighted by their authors
# and need not follow the licensing terms described here, provided that
# the new terms are clearly indicated on the first page of each file where
# they apply.
DESTDIR =
VPATH = @srcdir@
srcdir = @srcdir@
objdir = .
srcroot = $(srcdir)/../..
objroot = $(objdir)/../..
prefix = @prefix@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
target_alias = @target_alias@
program_transform_name = @program_transform_name@
bindir = @bindir@
libdir = @libdir@
tooldir = $(exec_prefix)/$(target_alias)
# Multilib support variables.
# TOP is used instead of MULTI{BUILD,SRC}TOP.
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
SHELL = /bin/sh
CC = @CC@
#AS = @AS@
AS = `if [ -f ${objroot}/../gas/as.new ] ; \
then echo ${objroot}/../gas/as.new ; \
else echo as ; fi`
AR = @AR@
#LD = @LD@
LD = `if [ -f ${objroot}/../ld/ld.new ] ; \
then echo ${objroot}/../ld/ld.new ; \
else echo ld ; fi`
RANLIB = @RANLIB@
OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
then echo ${objroot}/../binutils/objdump ; \
else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
then echo ${objroot}/../binutils/objcopy ; \
else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`
CRT0 = @crt0@
PCRT0 = @pcrt0@
GENOBJS = syscalls.o fstat.o getpid.o isatty.o kill.o \
lseek.o print.o putnum.o stat.o unlink.o
GENOBJS2 = open.o close.o read.o write.o
IDTOBJS = idtmon.o @part_specific_obj@ ${GENOBJS}
PMONOBJS = pmon.o @part_specific_obj@ ${GENOBJS}
LSIOBJS = lsipmon.o @part_specific_obj@ ${GENOBJS}
DVEOBJS = dvemon.o @part_specific_obj@ ${GENOBJS} ${GENOBJS2}
JMR3904OBJS = jmr3904-io.o @part_specific_obj@ ${GENOBJS} ${GENOBJS2}
CFEOBJS = cfe.o cfe_api.o cfe_mem.o @part_specific_obj@ ${GENOBJS} ${GENOBJS2}
CYGMONOBJS = open.o close.o cygmon.o @part_specific_obj@ ${GENOBJS}
# Nullmon cannot support read and write, but the test cases pull them in via libs
NULLMONOBJS = nullmon.o @part_specific_obj@ ${GENOBJS}
CFLAGS = -g
GCC_LDFLAGS = `if [ -d ${objroot}/../gcc ] ; \
then echo -L${objroot}/../gcc ; fi`
SCRIPTS = @script_list@
BSP = @bsp_list@
PART_SPECIFIC_DEFINES = @part_specific_defines@
# Host specific makefile fragment comes in here.
@host_makefile_frag@
#
# build a test program for each target board. Just trying to get
# it to link is a good test, so we ignore all the errors for now.
#
all: ${CRT0} ${PCRT0} test.o ${BSP}
#
# here's where we build the board support packages for each target
#
mipsidt.o: $(IDTOBJS)
${LD} -r $(IDTOBJS) -o $@
mipspmon.o: $(PMONOBJS)
${LD} -r $(PMONOBJS) -o $@
mipslsi.o: $(PMONOBJS)
${LD} -r $(LSIOBJS) -o $@
libidt.a: $(IDTOBJS)
${AR} ${ARFLAGS} $@ $(IDTOBJS)
${RANLIB} $@
libpmon.a: $(PMONOBJS)
${AR} ${ARFLAGS} $@ $(PMONOBJS)
${RANLIB} $@
liblsi.a: $(LSIOBJS)
${AR} ${ARFLAGS} $@ $(LSIOBJS)
${RANLIB} $@
libdve.a: $(DVEOBJS)
${AR} ${ARFLAGS} $@ $(DVEOBJS)
${RANLIB} $@
libjmr3904.a: $(JMR3904OBJS)
${AR} ${ARFLAGS} $@ $(JMR3904OBJS)
${RANLIB} $@
libcygmon.a: $(CYGMONOBJS)
${AR} ${ARFLAGS} $@ $(CYGMONOBJS)
${RANLIB} $@
libcfe.a: $(CFEOBJS)
${AR} ${ARFLAGS} $@ $(CFEOBJS)
${RANLIB} $@
# nullmon.a , This is what you want if you want crt0 but NO mon services
# Supports GDB sim testing, board bringups, ICE operation.
libnullmon.a: $(NULLMONOBJS)
${AR} ${ARFLAGS} $@ $(NULLMONOBJS)
${RANLIB} $@
# compile a fully linked binary. The -Wl,-T*.ld is for the linker
# script. By using -Wl, the linker script is put on the proper place
# in the comand line for ld, and all the symbols will get fully
# resolved.
test: $(OBJS) ${BSP} pmon-test idt-test cfe-test
@echo Done...
dtor.o: $(srcdir)/dtor.C
$(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -o $@ -c $<
dtor.x: dtor.o ${CRT0} ${srcdir}/pmon.ld Makefile libpmon.a
${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \
dtor.o -o $@ $(NEWLIB_LDFLAGS) -N -Wl,-Tpmon.ld
pmon-test.x: test.o ${CRT0} Makefile libpmon.a
${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \
test.o -o $@ $(NEWLIB_LDFLAGS) -Wl,-Tpmon.ld
pmon-test.srec: pmon-test.x
$(OBJCOPY) -O srec pmon-test.x $@
pmon-test.dis: pmon-test.x
@rm -fr pmon-test.dis
$(OBJDUMP) -d pmon-test.x > $@
pmon-test: pmon-test.srec pmon-test.dis
idt-test.x: test.o ${CRT0} Makefile libidt.a
${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \
test.o -o $@ $(NEWLIB_LDFLAGS) -Wl,-Tidt.ld
idt-test.srec: idt-test.x
$(OBJCOPY) -O srec idt-test.x $@
idt-test.dis: idt-test.x
@rm -fr idt-test.dis
$(OBJDUMP) -d idt-test.x > $@
idt-test: idt-test.srec idt-test.dis
cfe-test.x: test.o ${CRT0} Makefile libcfe.a
${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \
test.o -o $@ $(NEWLIB_LDFLAGS) -Wl,-Tcfe.ld
cfe-test.srec: cfe-test.x
$(OBJCOPY) -O srec cfe-test.x $@
cfe-test.dis: cfe-test.x
@rm -fr cfe-test.dis
$(OBJDUMP) -d cfe-test.x > $@
cfe-test: cfe-test.srec cfe-test.dis
doc:
clean mostlyclean:
rm -f a.out core *.i *~ *.o *-test *.srec *.dis *.map *.x
distclean maintainer-clean realclean: clean
rm -f Makefile config.status a.out
.PHONY: install info install-info clean-info
install:
@for file in $(CRT0) $(PCRT0) $(BSP); do \
$(INSTALL_DATA) $${file} $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}; \
done
@for script in ${SCRIPTS}; do\
$(INSTALL_DATA) ${srcdir}/$${script}.ld $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$${script}.ld; \
done
info:
install-info:
clean-info:
test.o: ${srcdir}/test.c
# these are for the BSPs
crt0.o: ${srcdir}/crt0.S
pcrt0.o: ${srcdir}/crt0.S
$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) -DGCRT0 ${srcdir}/crt0.S -o ${PCRT0}
crt0_cfe.o: ${srcdir}/crt0_cfe.S
crt0_cygmon.o: ${srcdir}/crt0_cygmon.S
idtmon.o: ${srcdir}/idtmon.S
pmon.o: ${srcdir}/pmon.S
$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) $(PART_SPECIFIC_DEFINES) ${srcdir}/pmon.S -o pmon.o
vr4300.o: ${srcdir}/vr4300.S
$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/vr4300.S
vr5xxx.o: ${srcdir}/vr5xxx.S
$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/vr5xxx.S
lsipmon.o: $(srcdir)/lsipmon.S $(srcdir)/pmon.S
jmr3904-io.o: ${srcdir}/jmr3904-io.c
$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/jmr3904-io.c -o $@
cfe.o: ${srcdir}/cfe.c ${srcdir}/cfe_api.h
$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/cfe.c -o $@
cfe_api.o: ${srcdir}/cfe_api.c ${srcdir}/cfe_api.h ${srcdir}/cfe_api_int.h
$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/cfe_api.c -o $@
cfe_mem.o: ${srcdir}/cfe_mem.c ${srcdir}/cfe_api.h
$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/cfe_mem.c -o $@
# cma101 can not be compiled mips16, if a mips16 version is needed then
# it will have to be built, then this rule can be scrapped, allowing
# the implicit rule to run.
cma101.o: ${srcdir}/cma101.c
$(CC) -c $(CFLAGS_FOR_TARGET) -O2 $(INCLUDES) $(CFLAGS) -mno-mips16 ${srcdir}/cma101.c
# cygmon can not be compiled as mips16 since it uses the syscall instruction
cygmon.o: ${srcdir}/cygmon.c
$(CC) -c $(CFLAGS_FOR_TARGET) -O2 $(INCLUDES) $(CFLAGS) -mno-mips16 ${srcdir}/cygmon.c
syscalls.o: ${srcdir}/syscalls.c
# target specific makefile fragment comes in here.
@target_makefile_frag@
Makefile: Makefile.in config.status @host_makefile_frag_path@ @target_makefile_frag_path@
$(SHELL) config.status
config.status: configure
$(SHELL) config.status --recheck
Go to most recent revision | Compare with Previous | Blame | View Log