URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.18.0/] [newlib/] [Makefile.in] - Rev 264
Go to most recent revision | Compare with Previous | Blame | View Log
# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
DIST_COMMON = NEWS README ChangeLog $(srcdir)/Makefile.in \
$(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) acconfig.h $(srcdir)/newlib.hin \
$(srcdir)/../mkinstalldirs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \
$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = newlib.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)" \
"$(DESTDIR)$(toollibdir)"
LIBRARIES = $(toollib_LIBRARIES)
ARFLAGS = cru
libc_a_AR = $(AR) $(ARFLAGS)
libc_a_LIBADD =
libc_a_SOURCES = libc.c
libc_a_OBJECTS = libc.$(OBJEXT)
libm_a_AR = $(AR) $(ARFLAGS)
libm_a_LIBADD =
libm_a_SOURCES = libm.c
libm_a_OBJECTS = libm.$(OBJEXT)
LTLIBRARIES = $(toollib_LTLIBRARIES)
libc_la_LIBADD =
am_libc_la_OBJECTS =
libc_la_OBJECTS = $(am_libc_la_OBJECTS)
libc_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libc_la_LDFLAGS) \
$(LDFLAGS) -o $@
@USE_LIBTOOL_TRUE@am_libc_la_rpath = -rpath $(toollibdir)
libm_la_LIBADD =
am_libm_la_OBJECTS =
libm_la_OBJECTS = $(am_libm_la_OBJECTS)
libm_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libm_la_LDFLAGS) \
$(LDFLAGS) -o $@
@USE_LIBTOOL_TRUE@am_libm_la_rpath = -rpath $(toollibdir)
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
SOURCES = libc.c libm.c $(libc_la_SOURCES) $(libm_la_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
DATA = $(noinst_DATA) $(toollib_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DEJATOOL = $(PACKAGE)
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
EXPECT = `if test -f $(top_builddir)/../expect/expect; then \
echo $(top_builddir)/../expect/expect; \
else \
echo expect; \
fi`
RUNTEST = `if test -f $(top_srcdir)/../dejagnu/runtest; then \
echo $(top_srcdir)/../dejagnu/runtest; \
else \
echo runtest; \
fi`
DIST_SUBDIRS = libc libm doc . @EXTRA_DIRS@
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CC_FOR_NEWLIB = @CC_FOR_NEWLIB@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CRT0 = @CRT0@
CRT0_DIR = @CRT0_DIR@
CRT1 = @CRT1@
CRT1_DIR = @CRT1_DIR@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTRA_DIRS = @EXTRA_DIRS@
FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBM_MACHINE_OBJECTLIST = @LIBM_MACHINE_OBJECTLIST@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MACHINE_OBJECTLIST = @MACHINE_OBJECTLIST@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSIX_OBJECTLIST = @POSIX_OBJECTLIST@
RANLIB = @RANLIB@
READELF = @READELF@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIGNAL_OBJECTLIST = @SIGNAL_OBJECTLIST@
STDIO64_OBJECTLIST = @STDIO64_OBJECTLIST@
STRIP = @STRIP@
SYSCALL_OBJECTLIST = @SYSCALL_OBJECTLIST@
SYS_MACH_OBJECTLIST = @SYS_MACH_OBJECTLIST@
SYS_OBJECTLIST = @SYS_OBJECTLIST@
UNIX_OBJECTLIST = @UNIX_OBJECTLIST@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
aext = @aext@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libc_cv_initfinit_array = @libc_cv_initfinit_array@
libdir = @libdir@
libexecdir = @libexecdir@
libm_machine_dir = @libm_machine_dir@
localedir = @localedir@
localstatedir = @localstatedir@
lpfx = @lpfx@
lt_ECHO = @lt_ECHO@
machine_dir = @machine_dir@
mandir = @mandir@
mkdir_p = @mkdir_p@
newlib_basedir = @newlib_basedir@
oext = @oext@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sys_dir = @sys_dir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = cygnus dejagnu
ACLOCAL_AMFLAGS = -I . -I ..
# Multilib support variables.
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
LIBTOOL_VERSION_INFO = 0:0:0
@NEWLIB_HW_FP_FALSE@MATHDIR = math
@NEWLIB_HW_FP_TRUE@MATHDIR = mathfp
# Work around what appears to be a GNU make bug handling MAKEFLAGS
# values defined in terms of make variables, as is the case for CC and
# friends when we are called from the top level Makefile.
AM_MAKEFLAGS = \
"AR_FLAGS=$(AR_FLAGS)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CFLAGS=$(CFLAGS)" \
"CCASFLAGS=$(CCASFLAGS)" \
"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"LDFLAGS=$(LDFLAGS)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"MAKE=$(MAKE)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"PICFLAG=$(PICFLAG)" \
"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"EXPECT=$(EXPECT)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"exec_prefix=$(exec_prefix)" \
"infodir=$(infodir)" \
"libdir=$(libdir)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)" \
"top_toollibdir=$(toollibdir)" \
"AR=$(AR)" \
"AS=$(AS)" \
"CC=$(CC_FOR_NEWLIB)" \
"LD=$(LD)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"NM=$(NM)" \
"PICFLAG=$(PICFLAG)" \
"RANLIB=$(RANLIB)" \
"DESTDIR=$(DESTDIR)"
FLAGS_TO_PASS = $(AM_MAKEFLAGS)
@HAVE_DOC_FALSE@DOCDIR =
@HAVE_DOC_TRUE@DOCDIR = doc
SUBDIRS = libc libm \
$(DOCDIR) . $(EXTRA_DIRS)
tooldir = $(exec_prefix)/$(host_alias)
toollibdir = $(tooldir)/lib$(MULTISUBDIR)
AR_FLAGS = rc
@USE_LIBTOOL_TRUE@toollib_LTLIBRARIES = libm.la \
@USE_LIBTOOL_TRUE@ libc.la
@USE_LIBTOOL_FALSE@toollib_LIBRARIES = libm.a \
@USE_LIBTOOL_FALSE@ libc.a
noinst_DATA = stmp-targ-include
toollib_DATA = $(CRT0) $(CRT1)
# The functions ldexp, frexp and modf are traditionally supplied in
# both libc.a and libm.a. We build them in libm.a and copy them over,
# along with some required supporting routines.
MATHOBJS_IN_LIBC = \
$(lpfx)s_fpclassify.$(oext) $(lpfx)sf_fpclassify.$(oext) \
$(lpfx)s_isinf.$(oext) $(lpfx)sf_isinf.$(oext) \
$(lpfx)s_isnan.$(oext) $(lpfx)sf_isnan.$(oext) \
$(lpfx)s_isinfd.$(oext) $(lpfx)sf_isinff.$(oext) \
$(lpfx)s_isnand.$(oext) $(lpfx)sf_isnanf.$(oext) \
$(lpfx)s_nan.$(oext) $(lpfx)sf_nan.$(oext) \
$(lpfx)s_ldexp.$(oext) $(lpfx)sf_ldexp.$(oext) \
$(lpfx)s_frexp.$(oext) $(lpfx)sf_frexp.$(oext) \
$(lpfx)s_modf.$(oext) \
$(lpfx)sf_modf.$(oext) $(lpfx)s_scalbn.$(oext) \
$(lpfx)sf_scalbn.$(oext) \
$(lpfx)s_finite.$(oext) $(lpfx)sf_finite.$(oext) \
$(lpfx)s_copysign.$(oext) $(lpfx)sf_copysign.$(oext) \
$(lpfx)s_infconst.$(oext)
LIBC_OBJECTLISTS = \
$(POSIX_OBJECTLIST) \
$(SIGNAL_OBJECTLIST) \
$(SYSCALL_OBJECTLIST) \
$(UNIX_OBJECTLIST) \
$(STDIO64_OBJECTLIST) \
libc/argz/objectlist.awk.in \
libc/stdlib/objectlist.awk.in \
libc/time/objectlist.awk.in \
libc/ctype/objectlist.awk.in \
libc/search/objectlist.awk.in \
libc/string/objectlist.awk.in \
libc/locale/objectlist.awk.in \
libc/misc/objectlist.awk.in \
libc/reent/objectlist.awk.in \
libc/errno/objectlist.awk.in \
libc/stdio/objectlist.awk.in \
$(MACHINE_OBJECTLIST) \
$(SYS_OBJECTLIST) \
$(SYS_MACH_OBJECTLIST)
LIBM_OBJECTLISTS = \
libm/$(MATHDIR)/objectlist.awk.in \
libm/common/objectlist.awk.in \
$(LIBM_MACHINE_OBJECTLIST)
libm_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -lgcc -objectlist libm-libtool-objectlist
libc_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -lgcc -objectlist libc-libtool-objectlist
@USE_LIBTOOL_TRUE@libm_la_SOURCES =
@USE_LIBTOOL_TRUE@libm_la_DEPENDENCIES = libm-libtool-objectlist
@USE_LIBTOOL_TRUE@libc_la_SOURCES =
@USE_LIBTOOL_TRUE@libc_la_DEPENDENCIES = libc-libtool-objectlist
CLEANFILES = targ-include stmp-targ-include
CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
MAKEOVERRIDES =
# dejagnu support
RUNTESTFLAGS =
all: newlib.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
am--refresh:
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --cygnus'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --cygnus \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --cygnus Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
newlib.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/newlib.hin $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status newlib.h
distclean-hdr:
-rm -f newlib.h stamp-h1
install-toollibLIBRARIES: $(toollib_LIBRARIES)
@$(NORMAL_INSTALL)
test -z "$(toollibdir)" || $(MKDIR_P) "$(DESTDIR)$(toollibdir)"
@list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(toollibdir)'"; \
$(INSTALL_DATA) $$list2 "$(DESTDIR)$(toollibdir)" || exit $$?; }
@$(POST_INSTALL)
@list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \
for p in $$list; do \
if test -f $$p; then \
$(am__strip_dir) \
echo " ( cd '$(DESTDIR)$(toollibdir)' && $(RANLIB) $$f )"; \
( cd "$(DESTDIR)$(toollibdir)" && $(RANLIB) $$f ) || exit $$?; \
else :; fi; \
done
uninstall-toollibLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
test -n "$$files" || exit 0; \
echo " ( cd '$(DESTDIR)$(toollibdir)' && rm -f "$$files" )"; \
cd "$(DESTDIR)$(toollibdir)" && rm -f $$files
clean-toollibLIBRARIES:
-test -z "$(toollib_LIBRARIES)" || rm -f $(toollib_LIBRARIES)
@USE_LIBTOOL_TRUE@libc.a: $(libc_a_OBJECTS) $(libc_a_DEPENDENCIES)
@USE_LIBTOOL_TRUE@ -rm -f libc.a
@USE_LIBTOOL_TRUE@ $(libc_a_AR) libc.a $(libc_a_OBJECTS) $(libc_a_LIBADD)
@USE_LIBTOOL_TRUE@ $(RANLIB) libc.a
@USE_LIBTOOL_TRUE@libm.a: $(libm_a_OBJECTS) $(libm_a_DEPENDENCIES)
@USE_LIBTOOL_TRUE@ -rm -f libm.a
@USE_LIBTOOL_TRUE@ $(libm_a_AR) libm.a $(libm_a_OBJECTS) $(libm_a_LIBADD)
@USE_LIBTOOL_TRUE@ $(RANLIB) libm.a
install-toollibLTLIBRARIES: $(toollib_LTLIBRARIES)
@$(NORMAL_INSTALL)
test -z "$(toollibdir)" || $(MKDIR_P) "$(DESTDIR)$(toollibdir)"
@list='$(toollib_LTLIBRARIES)'; test -n "$(toollibdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toollibdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toollibdir)"; \
}
uninstall-toollibLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(toollib_LTLIBRARIES)'; test -n "$(toollibdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toollibdir)/$$f'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toollibdir)/$$f"; \
done
clean-toollibLTLIBRARIES:
-test -z "$(toollib_LTLIBRARIES)" || rm -f $(toollib_LTLIBRARIES)
@list='$(toollib_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libc.la: $(libc_la_OBJECTS) $(libc_la_DEPENDENCIES)
$(libc_la_LINK) $(am_libc_la_rpath) $(libc_la_OBJECTS) $(libc_la_LIBADD) $(LIBS)
libm.la: $(libm_la_OBJECTS) $(libm_la_DEPENDENCIES)
$(libm_la_LINK) $(am_libm_la_rpath) $(libm_la_OBJECTS) $(libm_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
.c.o:
$(COMPILE) -c $<
.c.obj:
$(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
$(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
install-toollibDATA: $(toollib_DATA)
@$(NORMAL_INSTALL)
test -z "$(toollibdir)" || $(MKDIR_P) "$(DESTDIR)$(toollibdir)"
@list='$(toollib_DATA)'; test -n "$(toollibdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(toollibdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(toollibdir)" || exit $$?; \
done
uninstall-toollibDATA:
@$(NORMAL_UNINSTALL)
@list='$(toollib_DATA)'; test -n "$(toollibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
test -n "$$files" || exit 0; \
echo " ( cd '$(DESTDIR)$(toollibdir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(toollibdir)" && rm -f $$files
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) newlib.hin $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) newlib.hin $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) newlib.hin $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) newlib.hin $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distclean-DEJAGNU:
-rm -f site.exp site.bak
-l='$(DEJATOOL)'; for tool in $$l; do \
rm -f $$tool.sum $$tool.log; \
done
check-am:
$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
check: check-recursive
all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA) newlib.h
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool clean-toollibLIBRARIES \
clean-toollibLTLIBRARIES mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-DEJAGNU distclean-compile \
distclean-generic distclean-hdr distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-data-local install-toollibDATA \
install-toollibLIBRARIES install-toollibLTLIBRARIES
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-toollibDATA uninstall-toollibLIBRARIES \
uninstall-toollibLTLIBRARIES
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check-am \
ctags-recursive install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-DEJAGNU check-am clean \
clean-generic clean-libtool clean-toollibLIBRARIES \
clean-toollibLTLIBRARIES ctags ctags-recursive distclean \
distclean-DEJAGNU distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-tags dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-data-local install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
install-toollibDATA install-toollibLIBRARIES \
install-toollibLTLIBRARIES installcheck installcheck-am \
installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am \
uninstall-toollibDATA uninstall-toollibLIBRARIES \
uninstall-toollibLTLIBRARIES
# objects listed later in LIBM_OBJECTLISTS will override those listed earlier
@USE_LIBTOOL_TRUE@libm-libtool-objectlist: $(LIBM_OBJECTLISTS)
@USE_LIBTOOL_TRUE@ cat $(LIBM_OBJECTLISTS) | $(AWK) '{ libm[$$1] = $$2 }; END { for (x in libm) printf ("%s\n", libm[x]) }' > $@
# objects listed later in LIBM_OBJECTLISTS and LIBC_OBJECTLISTS will override those listed earlier
@USE_LIBTOOL_TRUE@libc-libtool-objectlist: $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS)
@USE_LIBTOOL_TRUE@ cat $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS) | $(AWK) '{ libc[$$1] = $$2 }; END { for (x in libc) printf ("%s\n", libc[x]) }' > $@
@USE_LIBTOOL_FALSE@libc.a: libc/libc.a libm.a
@USE_LIBTOOL_FALSE@ rm -rf libc.a libg.a tmp
@USE_LIBTOOL_FALSE@ mkdir tmp
@USE_LIBTOOL_FALSE@ cd tmp; \
@USE_LIBTOOL_FALSE@ $(AR) x ../libm.a $(MATHOBJS_IN_LIBC) ; \
@USE_LIBTOOL_FALSE@ $(AR) x ../libc/libc.a ; \
@USE_LIBTOOL_FALSE@ $(AR) $(AR_FLAGS) ../$@ *.o
@USE_LIBTOOL_FALSE@ $(RANLIB) libc.a
@USE_LIBTOOL_FALSE@ ln libc.a libg.a >/dev/null 2>/dev/null || cp libc.a libg.a
@USE_LIBTOOL_FALSE@ rm -rf tmp
@USE_LIBTOOL_FALSE@libc/libc.a: ; @true
@USE_LIBTOOL_FALSE@libm.a: libm/libm.a
@USE_LIBTOOL_FALSE@ rm -f $@
@USE_LIBTOOL_FALSE@ ln libm/libm.a $@ >/dev/null 2>/dev/null || cp libm/libm.a $@
@USE_LIBTOOL_FALSE@libm/libm.a: ; @true
crt0.o: $(CRT0_DIR)$(CRT0)
rm -f $@
ln $(CRT0_DIR)$(CRT0) $@ >/dev/null 2>/dev/null \
|| cp $(CRT0_DIR)$(CRT0) $@
$(CRT0_DIR)$(CRT0): ; @true
crt1.o: $(CRT1_DIR)$(CRT1)
rm -f $@
ln $< $@ >/dev/null 2>/dev/null \
|| cp $< $@
$(CRT1_DIR)$(CRT1): ; @true
$(srcdir)/newlib.hin:
all-recursive: stmp-targ-include
# The targ-include directory just holds the includes files for the
# particular system and machine we have been configured for. It is
# used while building.
stmp-targ-include: config.status
-rm -rf targ-include stmp-targ-include
mkdir targ-include targ-include/sys targ-include/machine targ-include/bits
cp newlib.h targ-include/newlib.h
-for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/machine/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/machine/$(machine_dir)/sys/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/sys/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/machine/$(machine_dir)/include/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/sys/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/bits/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/bits/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/machine/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/machine/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/machine/`basename $$i`; \
else true; fi ; \
done
touch $@
install-data-local: install-toollibLIBRARIES
@USE_LIBTOOL_FALSE@ rm -f $(DESTDIR)$(toollibdir)/libg.a
@USE_LIBTOOL_FALSE@ ln $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a >/dev/null 2>/dev/null || cp $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a
$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
-if [ -z "$(MULTISUBDIR)" ]; then \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include; \
for i in $(srcdir)/libc/include/*.h; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
done; \
$(INSTALL_DATA) newlib.h $(DESTDIR)$(tooldir)/include/newlib.h; \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/machine; \
for i in $(srcdir)/libc/include/machine/*.h; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
done; \
for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
else true; fi ; \
done; \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/sys; \
for i in $(srcdir)/libc/include/sys/*.h; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
done; \
for i in $(srcdir)/libc/machine/$(machine_dir)/sys/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/machine/$(machine_dir)/include/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
else true; fi ; \
done ; \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/bits; \
for i in $(srcdir)/libc/sys/$(sys_dir)/bits/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/bits/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
else true; fi ; \
done ; \
else true; fi
# Force makedoc to be built before building info files.
info-recursive: doc/makedoc
dvi-recursive: doc/makedoc
doc/makedoc:
cd doc && $(MAKE) all
# Multilib support.
.PHONY: all-multi check-multi mostlyclean-multi clean-multi distclean-multi \
maintainer-clean-multi
all-recursive: all-multi
check-recursive: check-multi
mostlyclean-recursive: mostlyclean-multi
clean-recursive: clean-multi
distclean-recursive: distclean-multi
maintainer-clean-recursive: maintainer-clean-multi
# The $(MAKE) comments below are to enable parallel building.
all-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
check-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=check multi-do # $(MAKE)
mostlyclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
distclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
maintainer-clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
site.exp: Makefile
@echo 'Making a new site.exp file...'
@test ! -f site.bak || rm -f site.bak
@echo '## these variables are automatically generated by make ##' > $@-t
@echo '# Do not edit here. If you wish to override these values' >> $@-t
@echo '# edit the last section' >> $@-t
@echo 'set tool $(DEJATOOL)' >> $@-t
@echo 'set tool_version $(VERSION)' >> $@-t
@echo 'set srcdir $(srcdir)/testsuite' >> $@-t
@echo 'set objdir' `pwd` >> $@-t
@echo 'set tmpdir' `pwd`/testsuite >> $@-t
@echo 'set multibuildtop ./$(MULTIBUILDTOP)' >> $@-t
@echo 'set host_alias $(build_alias)' >> $@-t
@echo 'set host_triplet $(build_triplet)' >> $@-t
@echo 'set target_alias $(host_alias)' >> $@-t
@echo 'set target_triplet $(host_triplet)' >> $@-t
@echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t
@test ! -f site.exp || sed '1,/^## All variables above are.*##/ d' site.exp >> $@-t
@test ! -f site.exp || mv site.exp site.bak
@mv $@-t site.exp
check-DEJAGNU: site.exp
@if [ -d testsuite ] ; then \
true ; \
else \
mkdir testsuite ; \
fi
@rm -f testsuite/site.exp
@cp site.exp testsuite/site.exp
@rootme=`pwd` ; \
export rootme ; \
srcdir=`cd ${srcdir}; pwd` ; \
export srcdir ; \
EXPECT=`if [ -f $${rootme}/${MULTIBUILDTOP}../../expect/expect ] ; then \
echo $${rootme}/${MULTIBUILDTOP}../../expect/expect ; \
else \
echo expect ; \
fi` ; \
export EXPECT ; \
echo "Found expect: $${EXPECT}" ; \
if [ -f $(top_builddir)/$(MULTIBUILDTOP)../../expect/expect ] ; then \
TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd` ; \
export TCL_LIBRARY ; \
echo "Found TCL library directory: $${TCL_LIBRARY}" ; \
fi ; \
RUNTEST=`if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
echo $${srcdir}/../dejagnu/runtest ; \
else \
echo runtest ; \
fi` ; \
export RUNTEST ; \
echo "Found runtest: $${RUNTEST}" ; \
cd testsuite ; \
if $(SHELL) -c "$$RUNTEST --version" > /dev/null 2>&1 ; then \
$$RUNTEST --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite $(RUNTESTFLAGS) ; \
: ; \
else \
echo "WARNING: could not find \`runtest'" 1>&2 ; \
fi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Go to most recent revision | Compare with Previous | Blame | View Log