OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.18.0/] [newlib/] [libc/] [search/] [hash.h] - Rev 309

Go to most recent revision | Compare with Previous | Blame | View Log

/*-
 * Copyright (c) 1990, 1993, 1994
 *	The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * Margo Seltzer.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)hash.h	8.3 (Berkeley) 5/31/94
 * $FreeBSD: src/lib/libc/db/hash/hash.h,v 1.6 2002/03/21 22:46:26 obrien Exp $
 */
 
#include <sys/param.h>
#define __need_size_t
#include <stddef.h>
 
/* Check that newlib understands the byte order of its target system.  */
#ifndef BYTE_ORDER
#error BYTE_ORDER not defined by sys/param.h
#endif
 
/* Define DB endianness constants based on target endianness.  */
#define DB_LITTLE_ENDIAN 1234
#define DB_BIG_ENDIAN 4321
#if (BYTE_ORDER == LITTLE_ENDIAN)
#define DB_BYTE_ORDER DB_LITTLE_ENDIAN
#else
#define DB_BYTE_ORDER DB_BIG_ENDIAN
#endif
 
/* Operations */
typedef enum {
	HASH_GET, HASH_PUT, HASH_PUTNEW, HASH_DELETE, HASH_FIRST, HASH_NEXT
} ACTION;
 
/* Buffer Management structures */
typedef struct _bufhead BUFHEAD;
 
struct _bufhead {
	BUFHEAD		*prev;		/* LRU links */
	BUFHEAD		*next;		/* LRU links */
	BUFHEAD		*ovfl;		/* Overflow page buffer header */
	__uint32_t	 addr;		/* Address of this page */
	char		*page;		/* Actual page data */
	char	 	flags;
#define	BUF_MOD		0x0001
#define BUF_DISK	0x0002
#define	BUF_BUCKET	0x0004
#define	BUF_PIN		0x0008
};
 
#define IS_BUCKET(X)	((X) & BUF_BUCKET)
 
typedef BUFHEAD **SEGMENT;
 
/* Hash Table Information */
typedef struct hashhdr {		/* Disk resident portion */
	int		magic;		/* Magic NO for hash tables */
	int		version;	/* Version ID */
	__uint32_t	lorder;		/* Byte Order */
	int		bsize;		/* Bucket/Page Size */
	int		bshift;		/* Bucket shift */
	int		dsize;		/* Directory Size */
	int		ssize;		/* Segment Size */
	int		sshift;		/* Segment shift */
	int		ovfl_point;	/* Where overflow pages are being 
					 * allocated */
	int		last_freed;	/* Last overflow page freed */
	int		max_bucket;	/* ID of Maximum bucket in use */
	int		high_mask;	/* Mask to modulo into entire table */
	int		low_mask;	/* Mask to modulo into lower half of 
					 * table */
	int		ffactor;	/* Fill factor */
	int		nkeys;		/* Number of keys in hash table */
	int		hdrpages;	/* Size of table header */
	int		h_charkey;	/* value of hash(CHARKEY) */
#define NCACHED	32			/* number of bit maps and spare 
					 * points */
	int		spares[NCACHED];/* spare pages for overflow */
	__uint16_t	bitmaps[NCACHED];	/* address of overflow page 
						 * bitmaps */
} HASHHDR;
 
typedef struct htab	 {		/* Memory resident data structure */
	HASHHDR 	hdr;		/* Header */
	int		nsegs;		/* Number of allocated segments */
	int		exsegs;		/* Number of extra allocated 
					 * segments */
	__uint32_t			/* Hash function */
	    (*hash)(const void *, size_t);
	int		flags;		/* Flag values */
	int		fp;		/* File pointer */
	char		*tmp_buf;	/* Temporary Buffer for BIG data */
	char		*tmp_key;	/* Temporary Buffer for BIG keys */
	BUFHEAD 	*cpage;		/* Current page */
	int		cbucket;	/* Current bucket */
	int		cndx;		/* Index of next item on cpage */
	int		error;		/* Error Number -- for DBM 
					 * compatibility */
	int		new_file;	/* Indicates if fd is backing store 
					 * or no */
	int		save_file;	/* Indicates whether we need to flush 
					 * file at
					 * exit */
	__uint32_t	*mapp[NCACHED];	/* Pointers to page maps */
	int		nmaps;		/* Initial number of bitmaps */
	int		nbufs;		/* Number of buffers left to 
					 * allocate */
	BUFHEAD 	bufhead;	/* Header of buffer lru list */
	SEGMENT 	*dir;		/* Hash Bucket directory */
} HTAB;
 
/*
 * Constants
 */
#define	MAX_BSIZE		65536		/* 2^16 */
#define MIN_BUFFERS		6
#define MINHDRSIZE		512
#define DEF_BUFSIZE		65536		/* 64 K */
#define DEF_BUCKET_SIZE		4096
#define DEF_BUCKET_SHIFT	12		/* log2(BUCKET) */
#define DEF_SEGSIZE		256
#define DEF_SEGSIZE_SHIFT	8		/* log2(SEGSIZE)	 */
#define DEF_DIRSIZE		256
#define DEF_FFACTOR		65536
#define MIN_FFACTOR		4
#define SPLTMAX			8
#define CHARKEY			"%$sniglet^&"
#define NUMKEY			1038583
#define BYTE_SHIFT		3
#define INT_TO_BYTE		2
#define INT_BYTE_SHIFT		5
#define ALL_SET			((__uint32_t)0xFFFFFFFF)
#define ALL_CLEAR		0
 
#define PTROF(X)	((BUFHEAD *)((ptrdiff_t)(X)&~0x3))
#define ISMOD(X)	((__uint32_t)(ptrdiff_t)(X)&0x1)
#define DOMOD(X)	((X) = (char *)((ptrdiff_t)(X)|0x1))
#define ISDISK(X)	((__uint32_t)(ptrdiff_t)(X)&0x2)
#define DODISK(X)	((X) = (char *)((ptrdiff_t)(X)|0x2))
 
#define BITS_PER_MAP	32
 
/* Given the address of the beginning of a big map, clear/set the nth bit */
#define CLRBIT(A, N)	((A)[(N)/BITS_PER_MAP] &= ~(1<<((N)%BITS_PER_MAP)))
#define SETBIT(A, N)	((A)[(N)/BITS_PER_MAP] |= (1<<((N)%BITS_PER_MAP)))
#define ISSET(A, N)	((A)[(N)/BITS_PER_MAP] & (1<<((N)%BITS_PER_MAP)))
 
/* Overflow management */
/*
 * Overflow page numbers are allocated per split point.  At each doubling of
 * the table, we can allocate extra pages.  So, an overflow page number has
 * the top 5 bits indicate which split point and the lower 11 bits indicate
 * which page at that split point is indicated (pages within split points are
 * numberered starting with 1).
 */
 
#define SPLITSHIFT	11
#define SPLITMASK	0x7FF
#define SPLITNUM(N)	(((__uint32_t)(N)) >> SPLITSHIFT)
#define OPAGENUM(N)	((N) & SPLITMASK)
#define	OADDR_OF(S,O)	((__uint32_t)((__uint32_t)(S) << SPLITSHIFT) + (O))
 
#define BUCKET_TO_PAGE(B) \
	(B) + hashp->HDRPAGES + ((B) ? hashp->SPARES[__log2((B)+1)-1] : 0)
#define OADDR_TO_PAGE(B) 	\
	BUCKET_TO_PAGE ( (1 << SPLITNUM((B))) -1 ) + OPAGENUM((B));
 
/*
 * page.h contains a detailed description of the page format.
 *
 * Normally, keys and data are accessed from offset tables in the top of
 * each page which point to the beginning of the key and data.  There are
 * four flag values which may be stored in these offset tables which indicate
 * the following:
 *
 *
 * OVFLPAGE	Rather than a key data pair, this pair contains
 *		the address of an overflow page.  The format of
 *		the pair is:
 *		    OVERFLOW_PAGE_NUMBER OVFLPAGE
 *
 * PARTIAL_KEY	This must be the first key/data pair on a page
 *		and implies that page contains only a partial key.
 *		That is, the key is too big to fit on a single page
 *		so it starts on this page and continues on the next.
 *		The format of the page is:
 *		    KEY_OFF PARTIAL_KEY OVFL_PAGENO OVFLPAGE
 *
 *		    KEY_OFF -- offset of the beginning of the key
 *		    PARTIAL_KEY -- 1
 *		    OVFL_PAGENO - page number of the next overflow page
 *		    OVFLPAGE -- 0
 *
 * FULL_KEY	This must be the first key/data pair on the page.  It
 *		is used in two cases.
 *
 *		Case 1:
 *		    There is a complete key on the page but no data
 *		    (because it wouldn't fit).  The next page contains
 *		    the data.
 *
 *		    Page format it:
 *		    KEY_OFF FULL_KEY OVFL_PAGENO OVFL_PAGE
 *
 *		    KEY_OFF -- offset of the beginning of the key
 *		    FULL_KEY -- 2
 *		    OVFL_PAGENO - page number of the next overflow page
 *		    OVFLPAGE -- 0
 *
 *		Case 2:
 *		    This page contains no key, but part of a large
 *		    data field, which is continued on the next page.
 *
 *		    Page format it:
 *		    DATA_OFF FULL_KEY OVFL_PAGENO OVFL_PAGE
 *
 *		    KEY_OFF -- offset of the beginning of the data on
 *				this page
 *		    FULL_KEY -- 2
 *		    OVFL_PAGENO - page number of the next overflow page
 *		    OVFLPAGE -- 0
 *
 * FULL_KEY_DATA
 *		This must be the first key/data pair on the page.
 *		There are two cases:
 *
 *		Case 1:
 *		    This page contains a key and the beginning of the
 *		    data field, but the data field is continued on the
 *		    next page.
 *
 *		    Page format is:
 *		    KEY_OFF FULL_KEY_DATA OVFL_PAGENO DATA_OFF
 *
 *		    KEY_OFF -- offset of the beginning of the key
 *		    FULL_KEY_DATA -- 3
 *		    OVFL_PAGENO - page number of the next overflow page
 *		    DATA_OFF -- offset of the beginning of the data
 *
 *		Case 2:
 *		    This page contains the last page of a big data pair.
 *		    There is no key, only the  tail end of the data
 *		    on this page.
 *
 *		    Page format is:
 *		    DATA_OFF FULL_KEY_DATA <OVFL_PAGENO> <OVFLPAGE>
 *
 *		    DATA_OFF -- offset of the beginning of the data on
 *				this page
 *		    FULL_KEY_DATA -- 3
 *		    OVFL_PAGENO - page number of the next overflow page
 *		    OVFLPAGE -- 0
 *
 *		    OVFL_PAGENO and OVFLPAGE are optional (they are
 *		    not present if there is no next page).
 */
 
#define OVFLPAGE	0
#define PARTIAL_KEY	1
#define FULL_KEY	2
#define FULL_KEY_DATA	3
#define	REAL_KEY	4
 
/* Short hands for accessing structure */
#define BSIZE		hdr.bsize
#define BSHIFT		hdr.bshift
#define DSIZE		hdr.dsize
#define SGSIZE		hdr.ssize
#define SSHIFT		hdr.sshift
#define LORDER		hdr.lorder
#define OVFL_POINT	hdr.ovfl_point
#define	LAST_FREED	hdr.last_freed
#define MAX_BUCKET	hdr.max_bucket
#define FFACTOR		hdr.ffactor
#define HIGH_MASK	hdr.high_mask
#define LOW_MASK	hdr.low_mask
#define NKEYS		hdr.nkeys
#define HDRPAGES	hdr.hdrpages
#define SPARES		hdr.spares
#define BITMAPS		hdr.bitmaps
#define HASH_VERSION	hdr.version
#define MAGIC		hdr.magic
#define NEXT_FREE	hdr.next_free
#define H_CHARKEY	hdr.h_charkey
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.