URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.18.0/] [newlib/] [libc/] [sys/] [a29khif/] [sys/] [cpudef.h] - Rev 309
Go to most recent revision | Compare with Previous | Blame | View Log
; @(#)cpudef.h 2.3 90/10/14 20:55:56, Copyright 1989, 1990 AMD ;----------------------------------------------------------------------- ; Useful equates ;----------------------------------------------------------------------- ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Copyright 1989, 1990 Advanced Micro Devices, Inc. ; ; This software is the property of Advanced Micro Devices, Inc (AMD) which ; specifically grants the user the right to modify, use and distribute this ; software provided this notice is not removed or altered. All other rights ; are reserved by AMD. ; ; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS ; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL ; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR ; USE OF THIS SOFTWARE. ; ; So that all may benefit from your experience, please report any problems ; or suggestions about this software to the 29K Technical Support Center at ; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or ; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. ; ; Advanced Micro Devices, Inc. ; 29K Support Products ; Mail Stop 573 ; 5900 E. Ben White Blvd. ; Austin, TX 78741 ; 800-292-9263 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Processor status registers OPS (sr1) and CPS (sr2) .equ CA,0x8000 ; Coprocessor active .equ IP,0x4000 ; Interrupt pending .equ TE,0x2000 ; Trace enable .equ TP,0x1000 ; Trace pending .equ TU,0x0800 ; Trap unaligned access .equ FZ,0x0400 ; Freeze .equ LK,0x0200 ; Lock .equ RE,0x0100 ; ROM enable .equ WM,0x0080 ; Wait mode .equ PD,0x0040 ; No translation for Data .equ PI,0x0020 ; No translation for Instr .equ SM,0x0010 ; Supervisor mode .equ IM,0x000C ; Interrupt mask .equ IM1,0x0100 ; enable INTR0-1 .equ IM2,0x1000 ; enable INTR0-2 .equ IM3,0x1100 ; enable INTR0-3 .equ DI,0x0002 ; Disable ints .equ DA,0x0001 ; Disable ints and traps ; Configuration register CFG (sr3) .equ PRL,0xFF000000 ; Processor release level .equ VF,0x10 ; Vector fetch .equ RV,0x08 ; ROM Vector area .equ BO,0x04 ; Byte order .equ CP,0x02 ; Coprocessor present .equ CD,0x01 ; BTC disable ; Channel control register CHC (sr6) .equ LS,0x8000 ; Load store .equ ML,0x4000 ; Multiple operation .equ ST,0x2000 ; Set .equ LA,0x1000 ; Lock active .equ TF,0x0400 ; Transaction faulted .equ TR,0x03FC ; Target register .equ NN,0x0002 ; Not needed .equ CV,0x0001 ; Contents valid ; Timer reload register TMR (sr9) .equ IE,0x01000000 ; timer int enable .equ IN,0x02000000 ; timer int pending .equ OV,0x04000000 ; timer Overflow ; MMU configuration register MMU (sr13) .equ PS,0x300 ; Page size .equ PID,0xFF ; Process identifier ; ALU status register ALU (sr132) .equ DF,0x800 ; Divide flag .equ V,0x400 ; Overflow .equ N,0x200 ; Negative .equ Z,0x100 ; Zero .equ C,0x080 ; Carry ; TLB entry .equ VTAG,0xFFFF8000 ; Virtual tag .equ VE,0x4000 ; Valid entry .equ SR,0x2000 ; Supervisor read .equ SW,0x1000 ; Supervisor write .equ SE,0x0800 ; Supervisor execute .equ UR,0x0400 ; User read .equ UW,0x0200 ; User write .equ UE,0x0100 ; User execute .equ TID,0x00FF ; Task identifier .equ RPN,0xFFFFFC00 ; Real page number .equ PGM,0x00C0 ; User programmable .equ U,0x0002 ; Usage .equ F,0x0001 ; Flag ;----------------------------------------------------------------------- ;Global registers ;----------------------------------------------------------------------- .reg rsp, gr1 ; local register stack pointer ; System-wide statics .reg s0, gr64 .reg spillreg, s0 ; pointer to user spill handler .reg s1, gr65 .reg fillreg, s1 ; pointer to user fill handler .reg s2, gr66 .reg heapptr, s2 ; pointer to heap area .reg s3, gr67 .reg s4, gr68 .reg s5, gr69 .reg s6, gr70 .reg s7, gr71 .reg s8, gr72 .reg s9, gr73 .reg s10, gr74 .reg s11, gr75 .reg s12, gr76 .reg s13, gr77 .reg s14, gr78 .reg s15, gr79 ; Interrupt handler temporaries .reg i0, gr80 .reg i1, gr81 .reg i2, gr82 .reg i3, gr83 .reg i4, gr84 .reg i5, gr85 .reg i6, gr86 .reg i7, gr87 .reg i8, gr88 .reg i9, gr89 .reg i10, gr90 .reg i11, gr91 .reg i12, gr92 .reg i13, gr93 .reg i14, gr94 .reg i15, gr95 ; Subroutine/function temporaries ; also used for function return values .reg t0, gr96 .reg rtn, t0 .reg t1, gr97 .reg t2, gr98 .reg t3, gr99 .reg t4, gr100 .reg t5, gr101 .reg t6, gr102 .reg t7, gr103 .reg t8, gr104 .reg t9, gr105 .reg t10, gr106 .reg t11, gr107 .reg t12, gr108 .reg t13, gr109 .reg t14, gr110 .reg t15, gr111 ; User process statics .reg u0, gr112 .reg u1, gr113 .reg u2, gr114 .reg u3, gr115 ; More subroutine/function temporaries .reg t16, gr116 .reg t17, gr117 .reg t18, gr118 .reg t19, gr119 .reg t20, gr120 ; Older names for the same registers .reg tmp0, gr116 .reg tmp1, gr117 .reg tmp2, gr118 .reg tmp3, gr119 .reg tmp4, gr120 ; Trap handler temporaries .reg tav, gr121 ; arg/temp .reg tpc, gr122 ; rtn/temp ; Linkage pointers .reg lrp, gr123 ; large rtn ptr .reg slp, gr124 ; static link ptr .reg msp, gr125 ; memory stack ptr .reg rab, gr126 ; register allocate bound .reg rfb, gr127 ; register free bound ;----------------------------------------------------------------------- ;Local compiler registers ; (only valid if frame has been established) ;----------------------------------------------------------------------- .reg p15, lr17 ; outgoing arg 16 .reg p14, lr16 ; outgoing arg 15 .reg p13, lr15 ; outgoing arg 14 .reg p12, lr14 ; outgoing arg 13 .reg p11, lr13 ; outgoing arg 12 .reg p10, lr12 ; outgoing arg 11 .reg p9, lr11 ; outgoing arg 10 .reg p8, lr10 ; outgoing arg 9 .reg p7, lr9 ; outgoing arg 8 .reg p6, lr8 ; outgoing arg 7 .reg p5, lr7 ; outgoing arg 6 .reg p4, lr6 ; outgoing arg 5 .reg p3, lr5 ; outgoing arg 4 .reg p2, lr4 ; outgoing arg 3 .reg p1, lr3 ; outgoing arg 2 .reg p0, lr2 ; outgoing arg 1 .reg fp, lr1 ; frame pointer .reg raddr, lr0 ; return address ;----------------------------------------------------------------------- ; Vectors ;----------------------------------------------------------------------- .equ V_ILLEG, 0 ; Illegal opcode .equ V_ALIGN, 1 ; Unaligned access .equ V_RANGE, 2 ; Out of range .equ V_COPRE, 3 ; Coprocessor not present .equ V_COEXC, 4 ; Coprocessor exception .equ V_PROT, 5 ; Protection violation .equ V_INSTR, 6 ; Instruction access exception .equ V_DATA, 7 ; Data access exception .equ V_UITLB, 8 ; User-mode instruction TLB miss .equ V_UDTLB, 9 ; User-mode data TLB miss .equ V_SITLB, 10 ; Supervisor-mode instr TLB miss .equ V_SDTLB, 11 ; Supervisor-mode data TLB miss .equ V_ITLB, 12 ; Instruction TLB violation .equ V_DTLB, 13 ; Data TLB violation .equ V_TIMER, 14 ; Timer .equ V_TRACE, 15 ; Trace .equ V_INTR0, 16 ; Interrupt 0 .equ V_INTR1, 17 ; Interrupt 1 .equ V_INTR2, 18 ; Interrupt 2 .equ V_INTR3, 19 ; Interrupt 3 .equ V_TRAP0, 20 ; Trap 0 .equ V_TRAP1, 21 ; Trap 1 ;----------------------------------------------------------------------- ;constants for LOAD and STORE operations ;----------------------------------------------------------------------- ; CE operand values .equ CE, 0b1 ;coprocessor enable .equ ME, 0b0 ; memory enable ; CNTL operand values .equ IO, 0b1000000 ;set for I/O .equ PA, 0b0100000 ;force physical addr .equ SB, 0b0010000 ;set for set BP .equ UA, 0b0001000 ;force user mode access .equ ROM, 0b0000100 ;ROM access .equ HWORD, 0b0000010 ;Half word access .equ BYTE, 0b0000001 ;Byte access .equ WORD, 0b0000000 ;Word access ;----------------------------------------------------------------------- ; stack alignment value ;----------------------------------------------------------------------- .equ STKALIGN, 8 ; double word align
Go to most recent revision | Compare with Previous | Blame | View Log