URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [newlib-1.18.0/] [newlib/] [libc/] [sys/] [linux/] [include/] [rpc/] [clnt.h] - Rev 301
Go to most recent revision | Compare with Previous | Blame | View Log
/* $NetBSD: clnt.h,v 1.14 2000/06/02 22:57:55 fvdl Exp $ */ /* * Sun RPC is a product of Sun Microsystems, Inc. and is provided for * unrestricted use provided that this legend is included on all tape * media and as a part of the software program in whole or part. Users * may copy or modify Sun RPC without charge, but are not authorized * to license or distribute it to anyone else except as part of a product or * program developed by the user. * * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE * WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE. * * Sun RPC is provided with no support and without any obligation on the * part of Sun Microsystems, Inc. to assist in its use, correction, * modification or enhancement. * * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC * OR ANY PART THEREOF. * * In no event will Sun Microsystems, Inc. be liable for any lost revenue * or profits or other special, indirect and consequential damages, even if * Sun has been advised of the possibility of such damages. * * Sun Microsystems, Inc. * 2550 Garcia Avenue * Mountain View, California 94043 * * from: @(#)clnt.h 1.31 94/04/29 SMI * from: @(#)clnt.h 2.1 88/07/29 4.0 RPCSRC * $FreeBSD: src/include/rpc/clnt.h,v 1.17 2002/04/28 15:18:45 des Exp $ */ /* * clnt.h - Client side remote procedure call interface. * * Copyright (C) 1984, Sun Microsystems, Inc. */ #ifndef _RPC_CLNT_H_ #define _RPC_CLNT_H_ #include <rpc/clnt_stat.h> #include <sys/cdefs.h> #include <netconfig.h> #include <sys/un.h> /* * Well-known IPV6 RPC broadcast address. */ #define RPCB_MULTICAST_ADDR "ff02::202" /* * the following errors are in general unrecoverable. The caller * should give up rather than retry. */ #define IS_UNRECOVERABLE_RPC(s) (((s) == RPC_AUTHERROR) || \ ((s) == RPC_CANTENCODEARGS) || \ ((s) == RPC_CANTDECODERES) || \ ((s) == RPC_VERSMISMATCH) || \ ((s) == RPC_PROCUNAVAIL) || \ ((s) == RPC_PROGUNAVAIL) || \ ((s) == RPC_PROGVERSMISMATCH) || \ ((s) == RPC_CANTDECODEARGS)) /* * Error info. */ struct rpc_err { enum clnt_stat re_status; union { int RE_errno; /* related system error */ enum auth_stat RE_why; /* why the auth error occurred */ struct { rpcvers_t low; /* lowest version supported */ rpcvers_t high; /* highest version supported */ } RE_vers; struct { /* maybe meaningful if RPC_FAILED */ int32_t s1; int32_t s2; } RE_lb; /* life boot & debugging only */ } ru; #define re_errno ru.RE_errno #define re_why ru.RE_why #define re_vers ru.RE_vers #define re_lb ru.RE_lb }; /* * Client rpc handle. * Created by individual implementations * Client is responsible for initializing auth, see e.g. auth_none.c. */ typedef struct __rpc_client { AUTH *cl_auth; /* authenticator */ struct clnt_ops { /* call remote procedure */ enum clnt_stat (*cl_call)(struct __rpc_client *, rpcproc_t, xdrproc_t, void *, xdrproc_t, void *, struct timeval); /* abort a call */ void (*cl_abort)(struct __rpc_client *); /* get specific error code */ void (*cl_geterr)(struct __rpc_client *, struct rpc_err *); /* frees results */ bool_t (*cl_freeres)(struct __rpc_client *, xdrproc_t, void *); /* destroy this structure */ void (*cl_destroy)(struct __rpc_client *); /* the ioctl() of rpc */ bool_t (*cl_control)(struct __rpc_client *, u_int, void *); } *cl_ops; void *cl_private; /* private stuff */ char *cl_netid; /* network token */ char *cl_tp; /* device name */ } CLIENT; /* * Timers used for the pseudo-transport protocol when using datagrams */ struct rpc_timers { u_short rt_srtt; /* smoothed round-trip time */ u_short rt_deviate; /* estimated deviation */ u_long rt_rtxcur; /* current (backed-off) rto */ }; /* * Feedback values used for possible congestion and rate control */ #define FEEDBACK_REXMIT1 1 /* first retransmit */ #define FEEDBACK_OK 2 /* no retransmits */ /* Used to set version of portmapper used in broadcast */ #define CLCR_SET_LOWVERS 3 #define CLCR_GET_LOWVERS 4 #define RPCSMALLMSGSIZE 400 /* a more reasonable packet size */ /* * client side rpc interface ops * * Parameter types are: * */ /* * enum clnt_stat * CLNT_CALL(rh, proc, xargs, argsp, xres, resp, timeout) * CLIENT *rh; * rpcproc_t proc; * xdrproc_t xargs; * void *argsp; * xdrproc_t xres; * void *resp; * struct timeval timeout; */ #define CLNT_CALL(rh, proc, xargs, argsp, xres, resp, secs) \ ((*(rh)->cl_ops->cl_call)(rh, proc, xargs, \ argsp, xres, resp, secs)) #define clnt_call(rh, proc, xargs, argsp, xres, resp, secs) \ ((*(rh)->cl_ops->cl_call)(rh, proc, xargs, \ argsp, xres, resp, secs)) /* * void * CLNT_ABORT(rh); * CLIENT *rh; */ #define CLNT_ABORT(rh) ((*(rh)->cl_ops->cl_abort)(rh)) #define clnt_abort(rh) ((*(rh)->cl_ops->cl_abort)(rh)) /* * struct rpc_err * CLNT_GETERR(rh); * CLIENT *rh; */ #define CLNT_GETERR(rh,errp) ((*(rh)->cl_ops->cl_geterr)(rh, errp)) #define clnt_geterr(rh,errp) ((*(rh)->cl_ops->cl_geterr)(rh, errp)) /* * bool_t * CLNT_FREERES(rh, xres, resp); * CLIENT *rh; * xdrproc_t xres; * void *resp; */ #define CLNT_FREERES(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp)) #define clnt_freeres(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp)) /* * bool_t * CLNT_CONTROL(cl, request, info) * CLIENT *cl; * u_int request; * char *info; */ #define CLNT_CONTROL(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in)) #define clnt_control(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in)) /* * control operations that apply to both udp and tcp transports */ #define CLSET_TIMEOUT 1 /* set timeout (timeval) */ #define CLGET_TIMEOUT 2 /* get timeout (timeval) */ #define CLGET_SERVER_ADDR 3 /* get server's address (sockaddr) */ #define CLGET_FD 6 /* get connections file descriptor */ #define CLGET_SVC_ADDR 7 /* get server's address (netbuf) */ #define CLSET_FD_CLOSE 8 /* close fd while clnt_destroy */ #define CLSET_FD_NCLOSE 9 /* Do not close fd while clnt_destroy */ #define CLGET_XID 10 /* Get xid */ #define CLSET_XID 11 /* Set xid */ #define CLGET_VERS 12 /* Get version number */ #define CLSET_VERS 13 /* Set version number */ #define CLGET_PROG 14 /* Get program number */ #define CLSET_PROG 15 /* Set program number */ #define CLSET_SVC_ADDR 16 /* get server's address (netbuf) */ #define CLSET_PUSH_TIMOD 17 /* push timod if not already present */ #define CLSET_POP_TIMOD 18 /* pop timod */ /* * Connectionless only control operations */ #define CLSET_RETRY_TIMEOUT 4 /* set retry timeout (timeval) */ #define CLGET_RETRY_TIMEOUT 5 /* get retry timeout (timeval) */ #define CLSET_ASYNC 19 #define CLSET_CONNECT 20 /* Use connect() for UDP. (int) */ /* * void * CLNT_DESTROY(rh); * CLIENT *rh; */ #define CLNT_DESTROY(rh) ((*(rh)->cl_ops->cl_destroy)(rh)) #define clnt_destroy(rh) ((*(rh)->cl_ops->cl_destroy)(rh)) /* * RPCTEST is a test program which is accessible on every rpc * transport/port. It is used for testing, performance evaluation, * and network administration. */ #define RPCTEST_PROGRAM ((rpcprog_t)1) #define RPCTEST_VERSION ((rpcvers_t)1) #define RPCTEST_NULL_PROC ((rpcproc_t)2) #define RPCTEST_NULL_BATCH_PROC ((rpcproc_t)3) /* * By convention, procedure 0 takes null arguments and returns them */ #define NULLPROC ((rpcproc_t)0) /* * Below are the client handle creation routines for the various * implementations of client side rpc. They can return NULL if a * creation failure occurs. */ /* * Generic client creation routine. Supported protocols are those that * belong to the nettype namespace (/etc/netconfig). * CLIENT * * clnt_create(host, prog, vers, prot); * const char *host; -- hostname * const rpcprog_t prog; -- program number * const rpcvers_t vers; -- version number * const char *prot; -- protocol */ __BEGIN_DECLS extern CLIENT *clnt_create(const char *, const rpcprog_t, const rpcvers_t, const char *); /* * * const char *hostname; -- hostname * const rpcprog_t prog; -- program number * const rpcvers_t vers; -- version number * const char *nettype; -- network type */ /* * Generic client creation routine. Supported protocols are which belong * to the nettype name space. */ extern CLIENT *clnt_create_vers(const char *, const rpcprog_t, rpcvers_t *, const rpcvers_t, const rpcvers_t, const char *); /* * const char *host; -- hostname * const rpcprog_t prog; -- program number * rpcvers_t *vers_out; -- servers highest available version * const rpcvers_t vers_low; -- low version number * const rpcvers_t vers_high; -- high version number * const char *nettype; -- network type */ /* * Generic client creation routine. It takes a netconfig structure * instead of nettype */ extern CLIENT *clnt_tp_create(const char *, const rpcprog_t, const rpcvers_t, const struct netconfig *); /* * const char *hostname; -- hostname * const rpcprog_t prog; -- program number * const rpcvers_t vers; -- version number * const struct netconfig *netconf; -- network config structure */ /* * Generic TLI create routine. Only provided for compatibility. */ extern CLIENT *clnt_tli_create(const int, const struct netconfig *, const struct netbuf *, const rpcprog_t, const rpcvers_t, const u_int, const u_int); /* * const register int fd; -- fd * const struct netconfig *nconf; -- netconfig structure * const struct netbuf *svcaddr; -- servers address * const u_long prog; -- program number * const u_long vers; -- version number * const u_int sendsz; -- send size * const u_int recvsz; -- recv size */ /* * Low level clnt create routine for connectionful transports, e.g. tcp. */ extern CLIENT *clnt_vc_create(const int, const struct netbuf *, const rpcprog_t, const rpcvers_t, const u_int, const u_int); /* * Added for compatibility to old rpc 4.0. Obsoleted by clnt_vc_create(). */ extern CLIENT *clntunix_create(struct sockaddr_un *, u_long, u_long, int *, u_int, u_int); /* * const int fd; -- open file descriptor * const struct netbuf *svcaddr; -- servers address * const rpcprog_t prog; -- program number * const rpcvers_t vers; -- version number * const u_int sendsz; -- buffer recv size * const u_int recvsz; -- buffer send size */ /* * Low level clnt create routine for connectionless transports, e.g. udp. */ extern CLIENT *clnt_dg_create(const int, const struct netbuf *, const rpcprog_t, const rpcvers_t, const u_int, const u_int); /* * const int fd; -- open file descriptor * const struct netbuf *svcaddr; -- servers address * const rpcprog_t program; -- program number * const rpcvers_t version; -- version number * const u_int sendsz; -- buffer recv size * const u_int recvsz; -- buffer send size */ /* * Memory based rpc (for speed check and testing) * CLIENT * * clnt_raw_create(prog, vers) * u_long prog; * u_long vers; */ extern CLIENT *clnt_raw_create(rpcprog_t, rpcvers_t); __END_DECLS /* * Print why creation failed */ __BEGIN_DECLS extern void clnt_pcreateerror(const char *); /* stderr */ extern char *clnt_spcreateerror(const char *); /* string */ __END_DECLS /* * Like clnt_perror(), but is more verbose in its output */ __BEGIN_DECLS extern void clnt_perrno(enum clnt_stat); /* stderr */ extern char *clnt_sperrno(enum clnt_stat); /* string */ __END_DECLS /* * Print an English error message, given the client error code */ __BEGIN_DECLS extern void clnt_perror(CLIENT *, const char *); /* stderr */ extern char *clnt_sperror(CLIENT *, const char *); /* string */ __END_DECLS /* * If a creation fails, the following allows the user to figure out why. */ struct rpc_createerr { enum clnt_stat cf_stat; struct rpc_err cf_error; /* useful when cf_stat == RPC_PMAPFAILURE */ }; #ifdef _THREAD_SAFE __BEGIN_DECLS extern struct rpc_createerr *__rpc_createerr(void); __END_DECLS #define rpc_createerr (*(__rpc_createerr())) #else extern struct rpc_createerr rpc_createerr; #endif /* _THREAD_SAFE */ /* * The simplified interface: * enum clnt_stat * rpc_call(host, prognum, versnum, procnum, inproc, in, outproc, out, nettype) * const char *host; * const rpcprog_t prognum; * const rpcvers_t versnum; * const rpcproc_t procnum; * const xdrproc_t inproc, outproc; * const char *in; * char *out; * const char *nettype; */ __BEGIN_DECLS extern enum clnt_stat rpc_call(const char *, const rpcprog_t, const rpcvers_t, const rpcproc_t, const xdrproc_t, const char *, const xdrproc_t, char *, const char *); __END_DECLS /* * RPC broadcast interface * The call is broadcasted to all locally connected nets. * * extern enum clnt_stat * rpc_broadcast(prog, vers, proc, xargs, argsp, xresults, resultsp, * eachresult, nettype) * const rpcprog_t prog; -- program number * const rpcvers_t vers; -- version number * const rpcproc_t proc; -- procedure number * const xdrproc_t xargs; -- xdr routine for args * caddr_t argsp; -- pointer to args * const xdrproc_t xresults; -- xdr routine for results * caddr_t resultsp; -- pointer to results * const resultproc_t eachresult; -- call with each result * const char *nettype; -- Transport type * * For each valid response received, the procedure eachresult is called. * Its form is: * done = eachresult(resp, raddr, nconf) * bool_t done; * caddr_t resp; * struct netbuf *raddr; * struct netconfig *nconf; * where resp points to the results of the call and raddr is the * address if the responder to the broadcast. nconf is the transport * on which the response was received. * * extern enum clnt_stat * rpc_broadcast_exp(prog, vers, proc, xargs, argsp, xresults, resultsp, * eachresult, inittime, waittime, nettype) * const rpcprog_t prog; -- program number * const rpcvers_t vers; -- version number * const rpcproc_t proc; -- procedure number * const xdrproc_t xargs; -- xdr routine for args * caddr_t argsp; -- pointer to args * const xdrproc_t xresults; -- xdr routine for results * caddr_t resultsp; -- pointer to results * const resultproc_t eachresult; -- call with each result * const int inittime; -- how long to wait initially * const int waittime; -- maximum time to wait * const char *nettype; -- Transport type */ typedef bool_t (*resultproc_t)(caddr_t, ...); __BEGIN_DECLS extern enum clnt_stat rpc_broadcast(const rpcprog_t, const rpcvers_t, const rpcproc_t, const xdrproc_t, caddr_t, const xdrproc_t, caddr_t, const resultproc_t, const char *); extern enum clnt_stat rpc_broadcast_exp(const rpcprog_t, const rpcvers_t, const rpcproc_t, const xdrproc_t, caddr_t, const xdrproc_t, caddr_t, const resultproc_t, const int, const int, const char *); __END_DECLS /* For backward compatibility */ #include <rpc/clnt_soc.h> #endif /* !_RPC_CLNT_H_ */
Go to most recent revision | Compare with Previous | Blame | View Log