URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-stable/] [gcc-4.5.1/] [gcc/] [ada/] [s-taprop-mingw.adb] - Rev 859
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------ -- -- -- GNAT RUN-TIME LIBRARY (GNARL) COMPONENTS -- -- -- -- S Y S T E M . T A S K _ P R I M I T I V E S . O P E R A T I O N S -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2009, Free Software Foundation, Inc. -- -- -- -- GNARL is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. -- -- -- -- As a special exception under Section 7 of GPL version 3, you are granted -- -- additional permissions described in the GCC Runtime Library Exception, -- -- version 3.1, as published by the Free Software Foundation. -- -- -- -- You should have received a copy of the GNU General Public License and -- -- a copy of the GCC Runtime Library Exception along with this program; -- -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -- -- <http://www.gnu.org/licenses/>. -- -- -- -- GNARL was developed by the GNARL team at Florida State University. -- -- Extensive contributions were provided by Ada Core Technologies, Inc. -- -- -- ------------------------------------------------------------------------------ -- This is a NT (native) version of this package -- This package contains all the GNULL primitives that interface directly with -- the underlying OS. pragma Polling (Off); -- Turn off polling, we do not want ATC polling to take place during tasking -- operations. It causes infinite loops and other problems. with Ada.Unchecked_Deallocation; with Interfaces.C; with Interfaces.C.Strings; with System.Tasking.Debug; with System.OS_Primitives; with System.Task_Info; with System.Interrupt_Management; with System.Win32.Ext; with System.Soft_Links; -- We use System.Soft_Links instead of System.Tasking.Initialization because -- the later is a higher level package that we shouldn't depend on. For -- example when using the restricted run time, it is replaced by -- System.Tasking.Restricted.Stages. package body System.Task_Primitives.Operations is package SSL renames System.Soft_Links; use System.Tasking.Debug; use System.Tasking; use Interfaces.C; use Interfaces.C.Strings; use System.OS_Interface; use System.Parameters; use System.OS_Primitives; use System.Task_Info; use System.Win32; use System.Win32.Ext; pragma Link_With ("-Xlinker --stack=0x200000,0x1000"); -- Change the default stack size (2 MB) for tasking programs on Windows. -- This allows about 1000 tasks running at the same time. Note that -- we set the stack size for non tasking programs on System unit. -- Also note that under Windows XP, we use a Windows XP extension to -- specify the stack size on a per task basis, as done under other OSes. --------------------- -- Local Functions -- --------------------- procedure InitializeCriticalSection (pCriticalSection : access RTS_Lock); procedure InitializeCriticalSection (pCriticalSection : access CRITICAL_SECTION); pragma Import (Stdcall, InitializeCriticalSection, "InitializeCriticalSection"); procedure EnterCriticalSection (pCriticalSection : access RTS_Lock); procedure EnterCriticalSection (pCriticalSection : access CRITICAL_SECTION); pragma Import (Stdcall, EnterCriticalSection, "EnterCriticalSection"); procedure LeaveCriticalSection (pCriticalSection : access RTS_Lock); procedure LeaveCriticalSection (pCriticalSection : access CRITICAL_SECTION); pragma Import (Stdcall, LeaveCriticalSection, "LeaveCriticalSection"); procedure DeleteCriticalSection (pCriticalSection : access RTS_Lock); procedure DeleteCriticalSection (pCriticalSection : access CRITICAL_SECTION); pragma Import (Stdcall, DeleteCriticalSection, "DeleteCriticalSection"); ---------------- -- Local Data -- ---------------- Environment_Task_Id : Task_Id; -- A variable to hold Task_Id for the environment task Single_RTS_Lock : aliased RTS_Lock; -- This is a lock to allow only one thread of control in the RTS at -- a time; it is used to execute in mutual exclusion from all other tasks. -- Used mainly in Single_Lock mode, but also to protect All_Tasks_List Time_Slice_Val : Integer; pragma Import (C, Time_Slice_Val, "__gl_time_slice_val"); Dispatching_Policy : Character; pragma Import (C, Dispatching_Policy, "__gl_task_dispatching_policy"); function Get_Policy (Prio : System.Any_Priority) return Character; pragma Import (C, Get_Policy, "__gnat_get_specific_dispatching"); -- Get priority specific dispatching policy Foreign_Task_Elaborated : aliased Boolean := True; -- Used to identified fake tasks (i.e., non-Ada Threads) Annex_D : Boolean := False; -- Set to True if running with Annex-D semantics ------------------------------------ -- The thread local storage index -- ------------------------------------ TlsIndex : DWORD; pragma Export (Ada, TlsIndex); -- To ensure that this variable won't be local to this package, since -- in some cases, inlining forces this variable to be global anyway. -------------------- -- Local Packages -- -------------------- package Specific is function Is_Valid_Task return Boolean; pragma Inline (Is_Valid_Task); -- Does executing thread have a TCB? procedure Set (Self_Id : Task_Id); pragma Inline (Set); -- Set the self id for the current task end Specific; package body Specific is function Is_Valid_Task return Boolean is begin return TlsGetValue (TlsIndex) /= System.Null_Address; end Is_Valid_Task; procedure Set (Self_Id : Task_Id) is Succeeded : BOOL; begin Succeeded := TlsSetValue (TlsIndex, To_Address (Self_Id)); pragma Assert (Succeeded = Win32.TRUE); end Set; end Specific; --------------------------------- -- Support for foreign threads -- --------------------------------- function Register_Foreign_Thread (Thread : Thread_Id) return Task_Id; -- Allocate and Initialize a new ATCB for the current Thread function Register_Foreign_Thread (Thread : Thread_Id) return Task_Id is separate; ---------------------------------- -- Condition Variable Functions -- ---------------------------------- procedure Initialize_Cond (Cond : not null access Condition_Variable); -- Initialize given condition variable Cond procedure Finalize_Cond (Cond : not null access Condition_Variable); -- Finalize given condition variable Cond procedure Cond_Signal (Cond : not null access Condition_Variable); -- Signal condition variable Cond procedure Cond_Wait (Cond : not null access Condition_Variable; L : not null access RTS_Lock); -- Wait on conditional variable Cond, using lock L procedure Cond_Timed_Wait (Cond : not null access Condition_Variable; L : not null access RTS_Lock; Rel_Time : Duration; Timed_Out : out Boolean; Status : out Integer); -- Do timed wait on condition variable Cond using lock L. The duration -- of the timed wait is given by Rel_Time. When the condition is -- signalled, Timed_Out shows whether or not a time out occurred. -- Status is only valid if Timed_Out is False, in which case it -- shows whether Cond_Timed_Wait completed successfully. --------------------- -- Initialize_Cond -- --------------------- procedure Initialize_Cond (Cond : not null access Condition_Variable) is hEvent : HANDLE; begin hEvent := CreateEvent (null, Win32.TRUE, Win32.FALSE, Null_Ptr); pragma Assert (hEvent /= 0); Cond.all := Condition_Variable (hEvent); end Initialize_Cond; ------------------- -- Finalize_Cond -- ------------------- -- No such problem here, DosCloseEventSem has been derived. -- What does such refer to in above comment??? procedure Finalize_Cond (Cond : not null access Condition_Variable) is Result : BOOL; begin Result := CloseHandle (HANDLE (Cond.all)); pragma Assert (Result = Win32.TRUE); end Finalize_Cond; ----------------- -- Cond_Signal -- ----------------- procedure Cond_Signal (Cond : not null access Condition_Variable) is Result : BOOL; begin Result := SetEvent (HANDLE (Cond.all)); pragma Assert (Result = Win32.TRUE); end Cond_Signal; --------------- -- Cond_Wait -- --------------- -- Pre-condition: Cond is posted -- L is locked. -- Post-condition: Cond is posted -- L is locked. procedure Cond_Wait (Cond : not null access Condition_Variable; L : not null access RTS_Lock) is Result : DWORD; Result_Bool : BOOL; begin -- Must reset Cond BEFORE L is unlocked Result_Bool := ResetEvent (HANDLE (Cond.all)); pragma Assert (Result_Bool = Win32.TRUE); Unlock (L, Global_Lock => True); -- No problem if we are interrupted here: if the condition is signaled, -- WaitForSingleObject will simply not block Result := WaitForSingleObject (HANDLE (Cond.all), Wait_Infinite); pragma Assert (Result = 0); Write_Lock (L, Global_Lock => True); end Cond_Wait; --------------------- -- Cond_Timed_Wait -- --------------------- -- Pre-condition: Cond is posted -- L is locked. -- Post-condition: Cond is posted -- L is locked. procedure Cond_Timed_Wait (Cond : not null access Condition_Variable; L : not null access RTS_Lock; Rel_Time : Duration; Timed_Out : out Boolean; Status : out Integer) is Time_Out_Max : constant DWORD := 16#FFFF0000#; -- NT 4 can't handle excessive timeout values (e.g. DWORD'Last - 1) Time_Out : DWORD; Result : BOOL; Wait_Result : DWORD; begin -- Must reset Cond BEFORE L is unlocked Result := ResetEvent (HANDLE (Cond.all)); pragma Assert (Result = Win32.TRUE); Unlock (L, Global_Lock => True); -- No problem if we are interrupted here: if the condition is signaled, -- WaitForSingleObject will simply not block. if Rel_Time <= 0.0 then Timed_Out := True; Wait_Result := 0; else Time_Out := (if Rel_Time >= Duration (Time_Out_Max) / 1000 then Time_Out_Max else DWORD (Rel_Time * 1000)); Wait_Result := WaitForSingleObject (HANDLE (Cond.all), Time_Out); if Wait_Result = WAIT_TIMEOUT then Timed_Out := True; Wait_Result := 0; else Timed_Out := False; end if; end if; Write_Lock (L, Global_Lock => True); -- Ensure post-condition if Timed_Out then Result := SetEvent (HANDLE (Cond.all)); pragma Assert (Result = Win32.TRUE); end if; Status := Integer (Wait_Result); end Cond_Timed_Wait; ------------------ -- Stack_Guard -- ------------------ -- The underlying thread system sets a guard page at the bottom of a thread -- stack, so nothing is needed. -- ??? Check the comment above procedure Stack_Guard (T : ST.Task_Id; On : Boolean) is pragma Unreferenced (T, On); begin null; end Stack_Guard; -------------------- -- Get_Thread_Id -- -------------------- function Get_Thread_Id (T : ST.Task_Id) return OSI.Thread_Id is begin return T.Common.LL.Thread; end Get_Thread_Id; ---------- -- Self -- ---------- function Self return Task_Id is Self_Id : constant Task_Id := To_Task_Id (TlsGetValue (TlsIndex)); begin if Self_Id = null then return Register_Foreign_Thread (GetCurrentThread); else return Self_Id; end if; end Self; --------------------- -- Initialize_Lock -- --------------------- -- Note: mutexes and cond_variables needed per-task basis are initialized -- in Initialize_TCB and the Storage_Error is handled. Other mutexes (such -- as RTS_Lock, Memory_Lock...) used in the RTS is initialized before any -- status change of RTS. Therefore raising Storage_Error in the following -- routines should be able to be handled safely. procedure Initialize_Lock (Prio : System.Any_Priority; L : not null access Lock) is begin InitializeCriticalSection (L.Mutex'Access); L.Owner_Priority := 0; L.Priority := Prio; end Initialize_Lock; procedure Initialize_Lock (L : not null access RTS_Lock; Level : Lock_Level) is pragma Unreferenced (Level); begin InitializeCriticalSection (L); end Initialize_Lock; ------------------- -- Finalize_Lock -- ------------------- procedure Finalize_Lock (L : not null access Lock) is begin DeleteCriticalSection (L.Mutex'Access); end Finalize_Lock; procedure Finalize_Lock (L : not null access RTS_Lock) is begin DeleteCriticalSection (L); end Finalize_Lock; ---------------- -- Write_Lock -- ---------------- procedure Write_Lock (L : not null access Lock; Ceiling_Violation : out Boolean) is begin L.Owner_Priority := Get_Priority (Self); if L.Priority < L.Owner_Priority then Ceiling_Violation := True; return; end if; EnterCriticalSection (L.Mutex'Access); Ceiling_Violation := False; end Write_Lock; procedure Write_Lock (L : not null access RTS_Lock; Global_Lock : Boolean := False) is begin if not Single_Lock or else Global_Lock then EnterCriticalSection (L); end if; end Write_Lock; procedure Write_Lock (T : Task_Id) is begin if not Single_Lock then EnterCriticalSection (T.Common.LL.L'Access); end if; end Write_Lock; --------------- -- Read_Lock -- --------------- procedure Read_Lock (L : not null access Lock; Ceiling_Violation : out Boolean) is begin Write_Lock (L, Ceiling_Violation); end Read_Lock; ------------ -- Unlock -- ------------ procedure Unlock (L : not null access Lock) is begin LeaveCriticalSection (L.Mutex'Access); end Unlock; procedure Unlock (L : not null access RTS_Lock; Global_Lock : Boolean := False) is begin if not Single_Lock or else Global_Lock then LeaveCriticalSection (L); end if; end Unlock; procedure Unlock (T : Task_Id) is begin if not Single_Lock then LeaveCriticalSection (T.Common.LL.L'Access); end if; end Unlock; ----------------- -- Set_Ceiling -- ----------------- -- Dynamic priority ceilings are not supported by the underlying system procedure Set_Ceiling (L : not null access Lock; Prio : System.Any_Priority) is pragma Unreferenced (L, Prio); begin null; end Set_Ceiling; ----------- -- Sleep -- ----------- procedure Sleep (Self_ID : Task_Id; Reason : System.Tasking.Task_States) is pragma Unreferenced (Reason); begin pragma Assert (Self_ID = Self); if Single_Lock then Cond_Wait (Self_ID.Common.LL.CV'Access, Single_RTS_Lock'Access); else Cond_Wait (Self_ID.Common.LL.CV'Access, Self_ID.Common.LL.L'Access); end if; if Self_ID.Deferral_Level = 0 and then Self_ID.Pending_ATC_Level < Self_ID.ATC_Nesting_Level then Unlock (Self_ID); raise Standard'Abort_Signal; end if; end Sleep; ----------------- -- Timed_Sleep -- ----------------- -- This is for use within the run-time system, so abort is assumed to be -- already deferred, and the caller should be holding its own ATCB lock. procedure Timed_Sleep (Self_ID : Task_Id; Time : Duration; Mode : ST.Delay_Modes; Reason : System.Tasking.Task_States; Timedout : out Boolean; Yielded : out Boolean) is pragma Unreferenced (Reason); Check_Time : Duration := Monotonic_Clock; Rel_Time : Duration; Abs_Time : Duration; Result : Integer; pragma Unreferenced (Result); Local_Timedout : Boolean; begin Timedout := True; Yielded := False; if Mode = Relative then Rel_Time := Time; Abs_Time := Duration'Min (Time, Max_Sensible_Delay) + Check_Time; else Rel_Time := Time - Check_Time; Abs_Time := Time; end if; if Rel_Time > 0.0 then loop exit when Self_ID.Pending_ATC_Level < Self_ID.ATC_Nesting_Level; if Single_Lock then Cond_Timed_Wait (Self_ID.Common.LL.CV'Access, Single_RTS_Lock'Access, Rel_Time, Local_Timedout, Result); else Cond_Timed_Wait (Self_ID.Common.LL.CV'Access, Self_ID.Common.LL.L'Access, Rel_Time, Local_Timedout, Result); end if; Check_Time := Monotonic_Clock; exit when Abs_Time <= Check_Time; if not Local_Timedout then -- Somebody may have called Wakeup for us Timedout := False; exit; end if; Rel_Time := Abs_Time - Check_Time; end loop; end if; end Timed_Sleep; ----------------- -- Timed_Delay -- ----------------- procedure Timed_Delay (Self_ID : Task_Id; Time : Duration; Mode : ST.Delay_Modes) is Check_Time : Duration := Monotonic_Clock; Rel_Time : Duration; Abs_Time : Duration; Timedout : Boolean; Result : Integer; pragma Unreferenced (Timedout, Result); begin if Single_Lock then Lock_RTS; end if; Write_Lock (Self_ID); if Mode = Relative then Rel_Time := Time; Abs_Time := Time + Check_Time; else Rel_Time := Time - Check_Time; Abs_Time := Time; end if; if Rel_Time > 0.0 then Self_ID.Common.State := Delay_Sleep; loop exit when Self_ID.Pending_ATC_Level < Self_ID.ATC_Nesting_Level; if Single_Lock then Cond_Timed_Wait (Self_ID.Common.LL.CV'Access, Single_RTS_Lock'Access, Rel_Time, Timedout, Result); else Cond_Timed_Wait (Self_ID.Common.LL.CV'Access, Self_ID.Common.LL.L'Access, Rel_Time, Timedout, Result); end if; Check_Time := Monotonic_Clock; exit when Abs_Time <= Check_Time; Rel_Time := Abs_Time - Check_Time; end loop; Self_ID.Common.State := Runnable; end if; Unlock (Self_ID); if Single_Lock then Unlock_RTS; end if; Yield; end Timed_Delay; ------------ -- Wakeup -- ------------ procedure Wakeup (T : Task_Id; Reason : System.Tasking.Task_States) is pragma Unreferenced (Reason); begin Cond_Signal (T.Common.LL.CV'Access); end Wakeup; ----------- -- Yield -- ----------- procedure Yield (Do_Yield : Boolean := True) is begin if Do_Yield then SwitchToThread; elsif Annex_D then -- If running with Annex-D semantics we need a delay -- above 0 milliseconds here otherwise processes give -- enough time to the other tasks to have a chance to -- run. -- -- This makes cxd8002 ACATS pass on Windows. Sleep (1); end if; end Yield; ------------------ -- Set_Priority -- ------------------ type Prio_Array_Type is array (System.Any_Priority) of Integer; pragma Atomic_Components (Prio_Array_Type); Prio_Array : Prio_Array_Type; -- Global array containing the id of the currently running task for -- each priority. -- -- Note: we assume that we are on a single processor with run-til-blocked -- scheduling. procedure Set_Priority (T : Task_Id; Prio : System.Any_Priority; Loss_Of_Inheritance : Boolean := False) is Res : BOOL; Array_Item : Integer; begin Res := SetThreadPriority (T.Common.LL.Thread, Interfaces.C.int (Underlying_Priorities (Prio))); pragma Assert (Res = Win32.TRUE); if Dispatching_Policy = 'F' or else Get_Policy (Prio) = 'F' then -- Annex D requirement [RM D.2.2 par. 9]: -- If the task drops its priority due to the loss of inherited -- priority, it is added at the head of the ready queue for its -- new active priority. if Loss_Of_Inheritance and then Prio < T.Common.Current_Priority then Array_Item := Prio_Array (T.Common.Base_Priority) + 1; Prio_Array (T.Common.Base_Priority) := Array_Item; loop -- Let some processes a chance to arrive Yield; -- Then wait for our turn to proceed exit when Array_Item = Prio_Array (T.Common.Base_Priority) or else Prio_Array (T.Common.Base_Priority) = 1; end loop; Prio_Array (T.Common.Base_Priority) := Prio_Array (T.Common.Base_Priority) - 1; end if; end if; T.Common.Current_Priority := Prio; end Set_Priority; ------------------ -- Get_Priority -- ------------------ function Get_Priority (T : Task_Id) return System.Any_Priority is begin return T.Common.Current_Priority; end Get_Priority; ---------------- -- Enter_Task -- ---------------- -- There were two paths were we needed to call Enter_Task : -- 1) from System.Task_Primitives.Operations.Initialize -- 2) from System.Tasking.Stages.Task_Wrapper -- The thread initialisation has to be done only for the first case -- This is because the GetCurrentThread NT call does not return the real -- thread handler but only a "pseudo" one. It is not possible to release -- the thread handle and free the system resources from this "pseudo" -- handle. So we really want to keep the real thread handle set in -- System.Task_Primitives.Operations.Create_Task during thread creation. procedure Enter_Task (Self_ID : Task_Id) is procedure Init_Float; pragma Import (C, Init_Float, "__gnat_init_float"); -- Properly initializes the FPU for x86 systems begin Specific.Set (Self_ID); Init_Float; if Self_ID.Common.Task_Info /= null and then Self_ID.Common.Task_Info.CPU >= CPU_Number (Number_Of_Processors) then raise Invalid_CPU_Number; end if; Self_ID.Common.LL.Thread_Id := GetCurrentThreadId; end Enter_Task; -------------- -- New_ATCB -- -------------- function New_ATCB (Entry_Num : Task_Entry_Index) return Task_Id is begin return new Ada_Task_Control_Block (Entry_Num); end New_ATCB; ------------------- -- Is_Valid_Task -- ------------------- function Is_Valid_Task return Boolean renames Specific.Is_Valid_Task; ----------------------------- -- Register_Foreign_Thread -- ----------------------------- function Register_Foreign_Thread return Task_Id is begin if Is_Valid_Task then return Self; else return Register_Foreign_Thread (GetCurrentThread); end if; end Register_Foreign_Thread; -------------------- -- Initialize_TCB -- -------------------- procedure Initialize_TCB (Self_ID : Task_Id; Succeeded : out Boolean) is begin -- Initialize thread ID to 0, this is needed to detect threads that -- are not yet activated. Self_ID.Common.LL.Thread := 0; Initialize_Cond (Self_ID.Common.LL.CV'Access); if not Single_Lock then Initialize_Lock (Self_ID.Common.LL.L'Access, ATCB_Level); end if; Succeeded := True; end Initialize_TCB; ----------------- -- Create_Task -- ----------------- procedure Create_Task (T : Task_Id; Wrapper : System.Address; Stack_Size : System.Parameters.Size_Type; Priority : System.Any_Priority; Succeeded : out Boolean) is Initial_Stack_Size : constant := 1024; -- We set the initial stack size to 1024. On Windows version prior to XP -- there is no way to fix a task stack size. Only the initial stack size -- can be set, the operating system will raise the task stack size if -- needed. function Is_Windows_XP return Integer; pragma Import (C, Is_Windows_XP, "__gnat_is_windows_xp"); -- Returns 1 if running on Windows XP hTask : HANDLE; TaskId : aliased DWORD; pTaskParameter : Win32.PVOID; Result : DWORD; Entry_Point : PTHREAD_START_ROUTINE; begin pTaskParameter := To_Address (T); Entry_Point := To_PTHREAD_START_ROUTINE (Wrapper); if Is_Windows_XP = 1 then hTask := CreateThread (null, DWORD (Stack_Size), Entry_Point, pTaskParameter, DWORD (Create_Suspended) or DWORD (Stack_Size_Param_Is_A_Reservation), TaskId'Unchecked_Access); else hTask := CreateThread (null, Initial_Stack_Size, Entry_Point, pTaskParameter, DWORD (Create_Suspended), TaskId'Unchecked_Access); end if; -- Step 1: Create the thread in blocked mode if hTask = 0 then Succeeded := False; return; end if; -- Step 2: set its TCB T.Common.LL.Thread := hTask; -- Step 3: set its priority (child has inherited priority from parent) Set_Priority (T, Priority); if Time_Slice_Val = 0 or else Dispatching_Policy = 'F' or else Get_Policy (Priority) = 'F' then -- Here we need Annex D semantics so we disable the NT priority -- boost. A priority boost is temporarily given by the system to a -- thread when it is taken out of a wait state. SetThreadPriorityBoost (hTask, DisablePriorityBoost => Win32.TRUE); end if; -- Step 4: Handle Task_Info if T.Common.Task_Info /= null then if T.Common.Task_Info.CPU /= Task_Info.Any_CPU then Result := SetThreadIdealProcessor (hTask, T.Common.Task_Info.CPU); pragma Assert (Result = 1); end if; end if; -- Step 5: Now, start it for good: Result := ResumeThread (hTask); pragma Assert (Result = 1); Succeeded := Result = 1; end Create_Task; ------------------ -- Finalize_TCB -- ------------------ procedure Finalize_TCB (T : Task_Id) is Self_ID : Task_Id := T; Result : DWORD; Succeeded : BOOL; Is_Self : constant Boolean := T = Self; procedure Free is new Ada.Unchecked_Deallocation (Ada_Task_Control_Block, Task_Id); begin if not Single_Lock then Finalize_Lock (T.Common.LL.L'Access); end if; Finalize_Cond (T.Common.LL.CV'Access); if T.Known_Tasks_Index /= -1 then Known_Tasks (T.Known_Tasks_Index) := null; end if; if Self_ID.Common.LL.Thread /= 0 then -- This task has been activated. Wait for the thread to terminate -- then close it. This is needed to release system resources. Result := WaitForSingleObject (T.Common.LL.Thread, Wait_Infinite); pragma Assert (Result /= WAIT_FAILED); Succeeded := CloseHandle (T.Common.LL.Thread); pragma Assert (Succeeded = Win32.TRUE); end if; Free (Self_ID); if Is_Self then Specific.Set (null); end if; end Finalize_TCB; --------------- -- Exit_Task -- --------------- procedure Exit_Task is begin Specific.Set (null); end Exit_Task; ---------------- -- Abort_Task -- ---------------- procedure Abort_Task (T : Task_Id) is pragma Unreferenced (T); begin null; end Abort_Task; ---------------------- -- Environment_Task -- ---------------------- function Environment_Task return Task_Id is begin return Environment_Task_Id; end Environment_Task; -------------- -- Lock_RTS -- -------------- procedure Lock_RTS is begin Write_Lock (Single_RTS_Lock'Access, Global_Lock => True); end Lock_RTS; ---------------- -- Unlock_RTS -- ---------------- procedure Unlock_RTS is begin Unlock (Single_RTS_Lock'Access, Global_Lock => True); end Unlock_RTS; ---------------- -- Initialize -- ---------------- procedure Initialize (Environment_Task : Task_Id) is Discard : BOOL; pragma Unreferenced (Discard); begin Environment_Task_Id := Environment_Task; OS_Primitives.Initialize; Interrupt_Management.Initialize; if Time_Slice_Val = 0 or else Dispatching_Policy = 'F' then -- Here we need Annex D semantics, switch the current process to the -- Realtime_Priority_Class. Discard := OS_Interface.SetPriorityClass (GetCurrentProcess, Realtime_Priority_Class); Annex_D := True; end if; TlsIndex := TlsAlloc; -- Initialize the lock used to synchronize chain of all ATCBs Initialize_Lock (Single_RTS_Lock'Access, RTS_Lock_Level); Environment_Task.Common.LL.Thread := GetCurrentThread; -- Make environment task known here because it doesn't go through -- Activate_Tasks, which does it for all other tasks. Known_Tasks (Known_Tasks'First) := Environment_Task; Environment_Task.Known_Tasks_Index := Known_Tasks'First; Enter_Task (Environment_Task); end Initialize; --------------------- -- Monotonic_Clock -- --------------------- function Monotonic_Clock return Duration renames System.OS_Primitives.Monotonic_Clock; ------------------- -- RT_Resolution -- ------------------- function RT_Resolution return Duration is begin return 0.000_001; -- 1 micro-second end RT_Resolution; ---------------- -- Initialize -- ---------------- procedure Initialize (S : in out Suspension_Object) is begin -- Initialize internal state. It is always initialized to False (ARM -- D.10 par. 6). S.State := False; S.Waiting := False; -- Initialize internal mutex InitializeCriticalSection (S.L'Access); -- Initialize internal condition variable S.CV := CreateEvent (null, Win32.TRUE, Win32.FALSE, Null_Ptr); pragma Assert (S.CV /= 0); end Initialize; -------------- -- Finalize -- -------------- procedure Finalize (S : in out Suspension_Object) is Result : BOOL; begin -- Destroy internal mutex DeleteCriticalSection (S.L'Access); -- Destroy internal condition variable Result := CloseHandle (S.CV); pragma Assert (Result = Win32.TRUE); end Finalize; ------------------- -- Current_State -- ------------------- function Current_State (S : Suspension_Object) return Boolean is begin -- We do not want to use lock on this read operation. State is marked -- as Atomic so that we ensure that the value retrieved is correct. return S.State; end Current_State; --------------- -- Set_False -- --------------- procedure Set_False (S : in out Suspension_Object) is begin SSL.Abort_Defer.all; EnterCriticalSection (S.L'Access); S.State := False; LeaveCriticalSection (S.L'Access); SSL.Abort_Undefer.all; end Set_False; -------------- -- Set_True -- -------------- procedure Set_True (S : in out Suspension_Object) is Result : BOOL; begin SSL.Abort_Defer.all; EnterCriticalSection (S.L'Access); -- If there is already a task waiting on this suspension object then -- we resume it, leaving the state of the suspension object to False, -- as it is specified in ARM D.10 par. 9. Otherwise, it just leaves -- the state to True. if S.Waiting then S.Waiting := False; S.State := False; Result := SetEvent (S.CV); pragma Assert (Result = Win32.TRUE); else S.State := True; end if; LeaveCriticalSection (S.L'Access); SSL.Abort_Undefer.all; end Set_True; ------------------------ -- Suspend_Until_True -- ------------------------ procedure Suspend_Until_True (S : in out Suspension_Object) is Result : DWORD; Result_Bool : BOOL; begin SSL.Abort_Defer.all; EnterCriticalSection (S.L'Access); if S.Waiting then -- Program_Error must be raised upon calling Suspend_Until_True -- if another task is already waiting on that suspension object -- (ARM D.10 par. 10). LeaveCriticalSection (S.L'Access); SSL.Abort_Undefer.all; raise Program_Error; else -- Suspend the task if the state is False. Otherwise, the task -- continues its execution, and the state of the suspension object -- is set to False (ARM D.10 par. 9). if S.State then S.State := False; LeaveCriticalSection (S.L'Access); SSL.Abort_Undefer.all; else S.Waiting := True; -- Must reset CV BEFORE L is unlocked Result_Bool := ResetEvent (S.CV); pragma Assert (Result_Bool = Win32.TRUE); LeaveCriticalSection (S.L'Access); SSL.Abort_Undefer.all; Result := WaitForSingleObject (S.CV, Wait_Infinite); pragma Assert (Result = 0); end if; end if; end Suspend_Until_True; ---------------- -- Check_Exit -- ---------------- -- Dummy versions. The only currently working versions is for solaris -- (native). function Check_Exit (Self_ID : ST.Task_Id) return Boolean is pragma Unreferenced (Self_ID); begin return True; end Check_Exit; -------------------- -- Check_No_Locks -- -------------------- function Check_No_Locks (Self_ID : ST.Task_Id) return Boolean is pragma Unreferenced (Self_ID); begin return True; end Check_No_Locks; ------------------ -- Suspend_Task -- ------------------ function Suspend_Task (T : ST.Task_Id; Thread_Self : Thread_Id) return Boolean is begin if T.Common.LL.Thread /= Thread_Self then return SuspendThread (T.Common.LL.Thread) = NO_ERROR; else return True; end if; end Suspend_Task; ----------------- -- Resume_Task -- ----------------- function Resume_Task (T : ST.Task_Id; Thread_Self : Thread_Id) return Boolean is begin if T.Common.LL.Thread /= Thread_Self then return ResumeThread (T.Common.LL.Thread) = NO_ERROR; else return True; end if; end Resume_Task; -------------------- -- Stop_All_Tasks -- -------------------- procedure Stop_All_Tasks is begin null; end Stop_All_Tasks; --------------- -- Stop_Task -- --------------- function Stop_Task (T : ST.Task_Id) return Boolean is pragma Unreferenced (T); begin return False; end Stop_Task; ------------------- -- Continue_Task -- ------------------- function Continue_Task (T : ST.Task_Id) return Boolean is pragma Unreferenced (T); begin return False; end Continue_Task; end System.Task_Primitives.Operations;
Go to most recent revision | Compare with Previous | Blame | View Log